71 Sentences With "reaming" | Random Sentence Generator

They are seeking damages and want all the reaming "Vibes" perfumes destroyed.

But few people likely have the rectums for safe and regular hardcore reaming.

The sheer number of announcements Microsoft made is astounding, but shock and awe couldn't save the company from a reaming by fans.

She's dejected after reaming out her philandering husband, convinced that because she doesn't resemble the screen sirens of the time she's not worth being seen.

Perhaps it's the ultimate sign post of the state of the mobile industry that the world's largest companies are battling over that reaming few millimeters.

You know what, when Christina fucks up the lyrics and sings about the "twilight's last reaming" instead of the ramparts that were "so gallantly streaming" it's almost a finesse.

I can tell you a story of Mr. Trump reaming out Reince Priebus because I had not taken a job where Mr. Trump wanted to, which was working with Don McGahn at the White House General Counsel's Office.

I can tell you a story of Mr. Trump reaming out Reince Priebus because I had not taken a job where Mr. Trump wanted me to, which is working with Don McGahn at the White House general counsel's office.

Just over a month into Trump's presidency, this is where we are: former staffers airing best practices for current staffers in the national press, all with the goal of restraining the president of the United States from reaming out the haters and losers on social.

Last week, hosts Jordan Fisher and Frankie Muniz shocked the four reaming teams — Ariana Greenblatt with Artyon Celestine, mentored by Brandon Armstrong; Mackenzie Ziegler with Sage Rosen, mentored by Gleb Savchenko; Miles Brown with Rylee Arnold, mentored by Lindsay Arnold; and Brown, Church and Bersten — with a big announcement.

"I can tell you a story of Mr. Trump reaming out (former White House Chief of Staff) Reince Priebus because I had not taken a job where Mr. Trump wanted me to, which was working with (former White House Counsel) Don McGahn in the White House Counsel office," Cohen continued.

During Sunday's episode, hosts Jordan Fisher and Frankie Muniz shocked the four reaming teams — Ariana Greenblatt with Artyon Celestine, mentored by Brandon Armstrong; Mackenzie Ziegler with Sage Rosen, mentored by Gleb Savchenko; Miles Brown with Rylee Arnold, mentored by Lindsay Arnold; and Sky Brown with JT Church, mentored by Alan Bersten — with a big announcement.

I can tell you a story of Mr. Trump reaming out Reince Priebus because I had not taken a job where Mr. Trump wanted me to work with Don McGahn at the White House General Counsel's office... What I said at the time, and I brought a lawyer in who produced a memo as to why I should not go in, because there would be no attorney-client privilege.

The final hole size that is achieved by a reamer subsequently depends on the reaming process being used in conjunction with the reamer design and materials involved. Studies have been conducted which demonstrate the effect of coolant use during reaming. The continuous use of a coolant stream during the reaming process has been shown to consistently (75% of the time) result in hole sizes that are 0.0001 in. (0.0025 mm) larger than the reamer itself, with a process spread of +/- 0.0002 in.

Shell reamers are designed for reaming bearing and other similar items. They are fluted almost their whole length.

Since the reaming process leaves the valve guide with a much better surface finish and shape than typical replacement guides, and since the oversize valves often have chrome plated stems, remanufacturers also discovered that valve train warranty issues are virtually eliminated. Studies have been conducted which show that through the proper selection of the reamer and reaming process, valves guides can be quickly and efficiently reamed to a consistently repeatable size.

The increased shoulder angle and reduced case taper eliminate the drooping shoulders of the original .303 British case, which, combined with reaming the chamber to .303 Epps, improves case life. The .

Dry reaming should be discouraged due to its low level of repeatability (20%) in size and wide process spread of sizes up to 0.0012 in. (0.030 mm) larger than the reamer size.

After the folding these chits are thrown in middle of the four players for collect one each. Among of them, who gets the Raja , he gives the order to mantri to find out who is chor from reaming two players. Mantri gets reaming point if he fined the correct one, else, the point will be zero and that point of the mantri goes to chor. Then, few numbers of the round going like this way and point has been noted in a note.

The lengthening of the case and the move of the shoulder forward over the .338 Winchester Magnum allowed for the reaming of the .308 Norma Magnum or .30-338 Winchester chamber to dimensions of the .

Over time, the inner diameter of the valve guide and the outer diameter of the valve stem may become worn. In the 1980s, many U.S. production engine remanufacturers began reaming valve guides, rather than replacing them, as part of their remanufacturing process. They found that by reaming all the valve guides in a head to one standard size (typically 0.008 in. diametrically oversized), and installing remanufactured engine valves having stems that are also oversized, a typical engine head can be remanufactured in much less time.

Methods of producing work to the required tolerances to achieve a desired fit range from casting, forging and drilling for the widest tolerances through broaching, reaming, milling and turning to lapping and honing at the tightest tolerances.

Instead of singing "O'er the ramparts we watched, were so gallantly streaming", the pop star sang "What so proudly we watched at the twilight's last gleaming". According to the New York Times, she also changed "gleaming" to "reaming".

Generally, reaming is done using a drill press. However, lathes, machining centers and similar machines can be used as well. The workpiece is firmly held in place by either a vise, chuck or fixture while the reamer advances.

The song was inspired by Cuomo's brother, who was having insurance problems after a serious car crash while at college. According to Cuomo, the song "explains how The Plan is reaming us all, especially my brother." "My Name Is Jonas" was written in the key of B major.

The Shock attacked first and completed the map with 3:21 reaming in their time bank. On defense, the Shock could not stop New York from reaching the first two checkpoints, but they held off the Excelsior from completing the map, handing NYXL 0–4 loss and ending their playoff run.

Its combination of a stable magnetic base and low RPM help resist or reduce torque forces created by large diameter bits. Magnetic drilling machines with reversible motor and variable speed controls can also performa operations like tapping, countersink and reaming. Magnetic drilling machine with cross table base and can also perform light milling.

450 Alaskan and the .457 Wild West Magnum do not require new barrels, but simply a chamber reaming and the required action modifications (referred to as "action lengthening"); the .457 magnum also allows continued ability to use .45-70. The .510 Kodiak Express is the most powerful wildcat conversion available for the Marlin at 5,000+ ft-lbs.

The Shock attacked first and completed the map with 3:21 reaming in their time bank. On defense, the Shock could not stop New York from reaching the first two checkpoints, but they held off the Excelsior from completing the map to claim their fourth straight 4–0 sweep in the playoffs. The win sent the Shock to the Grand Finals.

The process of shortening the operative field (mini-incision) for hip resurfacing from the conventional open approach (15–30 cm), to a mini-incision approach (7–15 cm) has been well documented in the realm of hip surgery.OPN may issue 2008 It has been suggested by some surgeons, however, that in doing this one runs the risk of implanting the components incorrectly, especially the acetabular component.McMinn Centre website It has also noted that during femoral head reaming (drilling of the femoral head) with the surgical site being so small, the conventional instruments can damage the soft tissues. Having accepted this, the essential criterion for minimally invasive hip resurfacing are: # An implant designed for MIS delivery # MIS instruments for tissue protection # Specialised instrumentation for femoral neck targeting, acetabular reaming, acetabular impaction and retractors that are soft tissue friendlyMr.

In cold ice, a borehole drilled with hot water will close up as the water freezes. To avoid this, the drill can be run back down the hole, warming the water and hence the surrounding ice. This is a form of reaming. Repeated reamings will raise the temperature of the surrounding ice to the point where the borehole will stay open for longer periods.

Annular Cutters in TCT and HSS The magnetic core drilling machine utilizes core drills or annular cutters. With a cutter wall thickness of approximately 5 mm only a small amount of material around the edge of a hole is removed by an annular cutter. Numerous teeth remain sharper longer than the single pointed tip of a spiral drill. Holes produced are smooth and burr-free - no reaming is required.

For handloading, reloadable Boxer-primed cartridge cases can be made from 5.56×45mm NATO brass. This requires inside neck-reaming, as such a conversion would otherwise leave unacceptably thick mid-to-rear case walls from the original cartridges to form the mouths of the new, shortened cases. At least one commercial source apparently can produce such a forming die set, complete with reamer. Loading data would be much like .

In May 1770 they moved to England. At the Royal Brass Foundry they introduced a horizontal boring machine, for guns cast solid (instead of vertically reaming guns cast round a core); this system had been installed by Verbruggen at The Hague in the 1750s. They also rebuilt the furnaces and casting pits, and used precast moulds for cascabels. Verbruggen's horizontal boring machine was the first industrial size lathe installed in England.

Afterwards, the oranges are separated based on size through machines prior to juice extraction. There are a number of different ways orange juice industry leaders extract their oranges. Some common methods include halving the fruit and pressing/reaming the orange to extract juice from the orange. One instrument inserts a tube through the orange peel and forces the juice out through the tube by squeezing the entire orange.

On 25 August, the day Paris was liberated, the USAAF Ninth Air Force attempted to eliminate the reaming German fighter forces in France. Defending against this attack, Mayer shot down a 354th Fighter Group P-51 near Saint-Quentin. On 17 September 1944, Allied forces launched Operation Market Garden, the operation to secure a bridgehead over the River Rhine. Two days later, II. Jagdkorps dispatched 148 fighters to the combat area.

30-06 were flawed from the beginning due to incomplete chamber reaming and other dimensional defects acquired during the manufacturing process at the Gladiator factory. Very few .30-06 Chauchats reached the front lines of northern France; however, when they did, it was reportedly not uncommon for U.S. units to simply discard their Chauchats in favor of M1903 Springfield rifles and cease to function as an auto-rifle squad altogether.Hoff, Thomas.

Some 7.63mm Mauser ammunition is still manufactured by Fiocchi, Sellier & Bellot, and Prvi Partizan. Reloadable boxer-primed cartridge cases can be formed from 9mm Winchester Magnum by simply resizing and trimming. Alternately, they can be formed from 5.56mm NATO with the additional step of inside neck-reaming. These cases bulge slightly on firing, and proper Mauser stripper clips are squeezed in a vise in order to secure an adequate grip on the smaller rims.

Spiral fluted machine reamer A reamer is a type of rotary cutting tool used in metalworking. Precision reamers are designed to enlarge the size of a previously formed hole by a small amount but with a high degree of accuracy to leave smooth sides. There are also non-precision reamers which are used for more basic enlargement of holes or for removing burrs. The process of enlarging the hole is called reaming.

To achieve highly accurate and consistent diameters with a reamer, one must consider process variables that can influence the overall quality of the hole being reamed. Variables such as reamer material, reamer design, material being reamed, temperature at the reamed surface, reamer speed, machine or operator movement, etc. must be addressed. By controlling these variables to the best extent possible, the reaming process can easily produce highly accurate and consistently sized holes.

Spoon bits consist of a grooved shank with a point shaped somewhat like the bowl of a spoon, with the cutting edge on the end. The more common type is like a gouge bit that ends in a slight point. This is helpful for starting the hole, as it has a center that will not wander or walk. These bits are used by chair-makers for boring or reaming holes in the seats and arms of chairs.

Since this chamber reaming operation is also possible for earlier I-bore rifles, 8×60mm chambered rifles (without the S or any other further additions) also exist. 8×60mm rifles sport the earlier tighter 8.07 mm (.318 in) I-bore as found in the 8×57mm I. To avoid potentially serious accidents, it is important to distinguish clearly between cartridges loaded for these two different bullet diameters, and only fire them in appropriately chambered/barrelled rifles.

White Spirit is a petroleum distillate used as a paint thinner and mild solvent. In industry, mineral spirits are used for cleaning and degreasing machine tools and parts, and in conjunction with cutting oil as a thread cutting and reaming lubricant. Mineral spirits are an inexpensive petroleum-based replacement for the vegetable-based turpentine. It is commonly used as a paint thinner for oil- based paint and cleaning brushes, and as an organic solvent in other applications.

Nevertheless, most Blue Amberol cylinders are, today, quite playable on antique phonographs or modern equipment alike (although the plaster core may need some reaming). Edison made several designs of phonographs both with internal and external horns for playing these improved cylinder records. The internal horn models were called Amberolas. Edison marketed its "Fireside" model phonograph with a gearshift and a 'model K' reproducer with two styli that allowed it to play both 2-minute and 4-minute cylinders.

Orange juice is a liquid extract of the orange tree fruit, produced by squeezing or reaming oranges. It comes in several different varieties, including blood orange, navel oranges, valencia orange, clementine, and tangerine. As well as variations in oranges used, some varieties include differing amounts of juice vesicles, known as "pulp" in American English, and "(juicy) bits" in British English. These vesicles contain the juice of the orange and can be left in or removed during the manufacturing process.

A chain suspension bridge - Clifton Suspension BridgeThe bars may be fabricated with pin holes that are slightly undersized. If so, these are then reamed in the field. This field reaming ensures that stresses will be uniformly distributed among the several bars forming the truss element or the chain link. Corrosion resistant treatment in the form of grease, white or red lead oil paste, or other water-excluding material may be added at the time of the assembly.

This facilitates the ability to do multiple machining operations that require different inner diameter (ID) bushings, such as drilling and reaming. They usually have knurled heads so they can be easily removed. Various methods to lock renewable bushings Renewable bushings must be secured in their liner bushing, otherwise the tool can cause it to spin, which rapidly wears out the liner, or chips can force the bushing out of the liner. There are many different types of locking systems for renewable bushings.

WorkNC-CAD is a manufacturing CAD software with surface and solid modeling functions. It is included free as a standard integrated component of WorkNC. It provides features required to design and manufacture molds, dies, and tooling without the need for additional software applications or outsourcing. WorkNC-CAD has advanced intelligent surface morphing for filling simple or complex cavities, automatic 2D feature recognition and cycle definition for drilling, counterboring, reaming and tapping, as well as automatic mold and die core separation.

Spiral fluted machine reamer A machine reamer only has a very slight lead in. Because the reamer and work piece are pre-aligned by the machine there is no risk of it wandering off course. In addition the constant cutting force that can be applied by the machine ensures that it starts cutting immediately. Spiral flutes have the advantage of clearing the swarf automatically but are also available with straight flutes as the amount of swarf generated during a reaming operation should be very small.

Starting pit with pilot hole and some drilling fluid in the pit The process starts with the receiving hole and entrance pits. These pits will allow the drilling fluid to be collected and reclaimed to reduce costs and prevent waste. The first stage drills a pilot hole on the designed path, and the second stage (reaming) enlarges the hole by passing a larger cutting tool known as the back reamer. The reamer's diameter depends on the size of the pipe to be pulled back through the bore hole.

From there, he frequently attacked the Han ally, the Wusun. In 44 BC, Chanyu Zhizhi sent an ambassador to offer tributes to Han, but at the same time demanded that Han deliver his son Juyilishou back to him. Emperor Yuan commissioned a guard commander, Gu Ji (), to escort Juyilishou. Initially, based on advice from Gong and other key officials, who reasoned that Zhizhi had no real intention to submit and was far away, Emperor Yuan instructed Gu to escort Juyilishou only to the Han borders, and let him travel the reaming journey on his own.

The Strata 950 was the first of the three drills to begin boring an escape shaft.Rescuers face tough challenge to save Chile miners, BBC News, Adrian Brown, 26 August 2010 In traditional raise boring operations, mining companies use a drilling technique known as ‘up- reaming’. Normally, this type of rig first drills a small pilot hole downward, then large machine cutters are attached to the drill which is sticking out the bottom of the pilot hole. The massive cutters are pulled up as they grind through thick rock, boring along the pilot hole.

Canada's 35-man extended squad ahead of Canada's 2019 RWC Qualifiers against Uruguay (doubles up as ARC Round 1) and for the reaming ARC rounds post qualification matches.CANADA TO FACE BRAZIL IN LANGFORD 1 Following the conclusion of the RWC Qualifiers between Canada and Uruguay, Canada called up players to cover the professional players returning to their European clubs. 2 Jones added Ryan Kotlewski and Cam Polson to the squad for the final two rounds. 3 Noah Barker was a late call up to the fourth round games against Argentina XV. 4Josh Thiel was added for the final round as injury cover.

For the third deck of the ships of the line and the small frigates he proposed an even lighter 36 pdr. It would weigh somewhere in between the 12- and 18-pounders then in use, and fire with only 5–6 pounds of powder. For the uppermost decks of the ships of the line and the frigates, and for small vessels, he proposed to retain the 36-pounder carronade, that weighed only 2,500 French pounds. Of course this proposal was suited for an approach that aimed to create these guns by boring up (or reaming out) guns to the next caliber.

The term abrasive jet refers specifically to the use of a mixture of water and abrasive to cut hard materials such as metal or granite, while the terms pure waterjet and water-only cutting refer to waterjet cutting without the use of added abrasives, often used for softer materials such as wood or rubber. Waterjet cutting is often used during fabrication of machine parts. It is the preferred method when the materials being cut are sensitive to the high temperatures generated by other methods. Waterjet cutting is used in various industries, including mining and aerospace, for cutting, shaping, and reaming.

A monobloc polyethylene cup is cemented in place while a metal cup is held in place by a metal coating on the outside of the cup. Modular cups consist of two pieces, a shell and liner. The shell is made of metal; the outside has a porous coating while the inside contains a locking mechanism designed to accept a liner. Two types of porous coating used to form a friction fit are sintered beads and a foam metal design to mimic the trabeculae of cancellous bone and initial stability is influenced by under- reaming and insertion force.

The noun machine tool and the verb to machine (machined, machining) did not yet exist. Around the middle of the 19th century, the latter words were coined as the concepts that they described evolved into widespread existence. Therefore, during the Machine Age, machining referred to (what we today might call) the "traditional" machining processes, such as turning, boring, drilling, milling, broaching, sawing, shaping, planing, reaming, and tapping.Machining: An Introduction In these "traditional" or "conventional" machining processes, machine tools, such as lathes, milling machines, drill presses, or others, are used with a sharp cutting tool to remove material to achieve a desired geometry.

There is also the very short-lived Pattern 1858 developed from the Pattern 1853 for Indian service. A consequence of the rebellion, based on British fears, was to modify the native infantry long arms by reaming out the rifling of the Pattern 1853 which greatly reduced the effectiveness, as was replacing the variable distance rear sight with a fixed sight. This became the Pattern 1858, with an increased bore of 0.656" from 0.577" and a thinner barrel wall. Bulging and bursting of the barrel became an issue, as well as excessive flexing when the bayonet was fitted.

7.92×57mm Mauser. Besides the S Patrone chambering, the S Patrone bore (designated as "S-bore") was also dimensionally redesigned. The S Patrone and its new spitzer bullet provided the accuracy and barrel life improvements the German military was looking for. As the bolt thrust of the 7.92×57mm Mauser is relatively low compared to many other service rounds used in the early 20th century, many arms originally chambered for the Patrone 88 could and were adapted for chambering the S Patrone by reaming out metal from the chamber as it required a wider chamber throat to take the differently shaped and thicker brass of the new S Patrone.

Bill Gibron of DVD Verdict called the episode a "biting political satire in the guise of a children's oratory contest [which] signifies that this season of the series will be all over the map, both emotionally and logically". Gibron added: "Everything, from the Reader's Digest rants to the formulaic speeches of the youths, has a resounding ring of truth. And once the story moves to Washington D.C, our nation's capital is in for a royal reaming as well." Bryce Wilson of Cinema Blend said the episode solidified the series' politically satirical voice as it "bitch slapped the Bush administration" that would later badmouth The Simpsons.

When drilling deep holes, which require drilling fluid, the hole must be cased (fitted with a cylindrical lining), since otherwise the drilling fluid will be absorbed by the snow and firn. The casing has to reach down to the impermeable ice layers. To install casing a shallow auger can be used to create a pilot hole, which is then reamed (expanded) until it is wide enough to accept the casing; a large diameter auger can also be used, avoiding the need for reaming. An alternative to casing is to use water in the borehole to saturate the porous snow and firn; the water eventually turns to ice.

By most recorded accounts, they were treated with relative dignity and respect. This further promotes the idea put forth by Waiser that this movement on Fort Pitt was not intended as an act of pure aggression, but one created out of the necessity to feed themselves and gain adequate supplies. During the second sacking of Fort Pitt on April the 9th the Cree under the orders of Wandering Spirit would raid the reaming resources and set fire to the fort Destroying all but one of the service buildings. On May the 26th a mounted column would arrive at Fort Pitt to see the remains still smouldering in the aftermath of the cree raid.

Classical classification of the frequency bands, that are associated to different functions/states of the brain consist of delta, theta, alpha, beta and gamma bands. Due to the limited capabilities of the early experimental/medical setup to record fast frequencies, for historical reason, all oscillations above 30 Hz were considered as high frequency and were difficult to investigate. Recent advance in manufacturing electrophysiological setups enables to record electric potential with high temporal and space resolution, and to "catch" dynamics of even single cell action potential. In neuroscience nomenclature, there is still a reaming gap between ~100 Hz and multi unit activity (>500 Hz), so these oscillations are often called high gamma or HFO.

Incidentally, after the Mutiny, manuals amended the method of opening the cartridge to, "Bring the cartridge to the forefinger and thumb of the left hand, and with the arm close to the body, carefully tear off the end without spilling the powder."Field Exercises and Evolutions of Infantry, 1861. As a consequence of British fears, the Indian infantry's long arms were modified to be less accurate by reaming out the rifling of the Pattern 1853 making it a smooth bore and the spherical / ball shot does not require greasing, just a patch. This greatly reduced the gun's potency and effectiveness, as did replacing the variable distance rear sight to a fixed sight.

The geometry of a hole drilled in metal by a twist drill may not be accurate enough (close enough to a true cylinder of a certain precise diameter) and may not have the required smooth surface finish for certain engineering applications. Although modern twist drills can perform excellently in many cases—usually producing sufficiently accurate holes for most applications—sometimes the stringency of the requirements for the hole's geometry and finish necessitate two operations: a drilling to slightly undersize, followed by reaming with a reamer. The planned difference between the drill diameter and the reamer diameter is called an allowance. (It allows for the removal of a certain small amount of material.) The allowance should be < 0.2 mm (.

The first blind transforaminal disectomy was done by Parvis Kambin in 1973 with Craig's canula's. The Tessys method was a further development of the existing YESS method (USA Anthony Yeung) by the Dutch Thomas Hoogland in 1989 in Munich by reaming a few mm's from the SAP (Superior Articular Process) . In January 2018, more than 400.000 patients worldwide are operated with the TESSYS method. Most of them with the original joimax reamers or the newer safer MaxMoreSpine drills also developed and patented by Dr Thomas Hoogland The system was introduced in the Netherlands in 2004 under the acronym PTED (percutane transformale endoscopische disectomy) by orthopaedic surgeon M. Iprenburg, who has since then successfully used the procedure with over 2600 of hernia patients with the joimax reamers.

"The indians told Mclean they wouldnt even need to attack the fort. They had brought 40 gallons of coal oil from Frog lake more than enough to set the small stockade and the building it contained ablaze" On April 17, 1885 the members of the Mistahimaskwa Cree Nation effectively take control of Fort Pitt and successfully negotiate the evacuation of the North West Mounted police. The members of the Mistahimaskwa Cree Nation successfully maintained control of Fort Pitt until July 2, 1885 when they surrendered to the North West Mounted police. After the police force was dispatched from the fort the reaming men, women, and children were given the choice to either leave the fort or stay as "hostages" the majority chose to stay.

When reaming a pre- bored straight-sided hole, the spoon bit is inserted into the hole and rotated in a clockwise direction with a carpenters' brace until the desired taper is achieved. When boring into solid wood, the bit should be started in the vertical position; after a "dish" has been created and the bit has begun to "bite" into the wood, the angle of boring can be changed by tilting the brace a bit out of the vertical. Holes can be drilled precisely, cleanly and quickly in any wood, at any angle of incidence, with total control of direction and the ability to change that direction at will. Parallel spoon bits are used primarily for boring holes in the seat of a Windsor chair to take the back spindles, or similar round-tenon work when assembling furniture frames in green woodworking work.

In most firearms (rifles, shotguns, machine guns and pistols), the chamber is an integral part of the barrel, often made by simply reaming the rear bore of a barrel blank, with a single chamber within a single barrel. In revolvers, the chamber is a component of the gun's cylinder and completely separate from the barrel, with a single cylinder having multiple chambers that are rotated in turns into alignment with the barrel in anticipation of being fired. Structurally, the chamber consists of the body, shoulder and neck, the contour of which closely correspond to the casing shape of the cartridge it is designed to hold. The rear opening of the chamber is the breech of the whole barrel, which is sealed tight from behind by the bolt, making the front direction the path of least resistance during firing.

With the improved ballistic coefficient of the new bullet, the 1903 pattern cartridge had an improved maximum effective range and a flatter trajectory, and was therefore less critical of range estimation compared to the M/88 cartridge. In German military service the Patrone 88 was replaced in 1904 and 1905 by the S Patrone. As the bolt thrust of the 7.92×57mm Mauser is relatively low compared to many other service rounds used in the early 20th century, many arms originally chambered for the Patrone 88 could be and were adapted for chambering the S Patrone by reaming out metal from the chamber as it required a wider chamber throat to take the differently shaped and thicker brass of the new S Patrone. The rimless cartridge cases have been used as parent case for several other necked down and necked up cartridges and a rimmed variant.

It resembles a specialized species of milling machine that provides tool and die makers with a higher degree of positioning precision (repeatability) and accuracy than those provided by general machines. Although capable of light milling, a jig borer is more suited to highly accurate drilling, boring, and reaming, where the quill or headstock does not see the significant side loading that it would with mill work, the result is a machine designed more for location accuracy than heavy material removal. A typical jig borer has a work table of around 400 x 200 mm, (16 x 8 inch) which can be moved using large handwheels (with micrometer-style readouts and verniers) on particularly carefully made shafts with a strong degree of gearing; this allows positions to be set on the two axes to an accuracy of 0.0001 inch (2.5 micron). It is generally used to enlarge to a precise size smaller holes drilled with less accurate machinery in approximately the correct place (ie with the small hole strictly within the area to be bored out for the large hole).