1000 Sentences With "moulding" | Random Sentence Generator

Injection moulding works by forcing molten plastic into a mould.

Injection moulding is therefore efficient only when making thousands of identical things.

He's listened in with an antenna made of coat-hangers and moulding.

To change the configuration of a product being made by injection moulding requires expensive retooling.

It also said then it was preparing to sell its European injection moulding automotive business.

The quality of the parts is comparable to injection moulding as well, according to the company.

If 25 million bricks aren't enough, a real LEGO moulding machine is installed in the lobby.

The couple was also given a tour to see the production process, including plating, moulding and welding.

I always get a kick out of seeing those sweaty glass blowers moulding the scorching hot, orange material.

Injection moulding has long been used to produce plastic parts by extruding a molten polymer into a mould.

I hate that I've bought into a patriarchal moulding that dictates women need to remain youthful to be relevant.

At 87, she can almost always be found in her favourite chair, painting, carving, and moulding sculptures for Buddhist temples.

The Peninsula lobby can only be described as majestic, with vaulted ceilings and thick columns accented with intricate gold moulding.

TUTHILL PLASTICS GROUP, an injection-moulding company in Clearwater, Florida, recently welcomed a new team member to its factory floor.

Injection moulding is fast and extremely accurate, but making the moulds and setting up the production line is slow and expensive.

This employs injection moulding to form the lenses; those lenses are then placed over the light-sensors in a separate operation.

This permits the production of magnets far more complex than injection moulding can turn out, as the team report in Applied Physics Letters.

Dr Paranthaman says that, with further work, the process should truly outperform injection moulding, especially for making prototypes and short-run customised designs.

While these 13-year-olds educate me on the perils of Snapchat, adults are worrying constantly about how screens are moulding young brains.

More of a modern, minimal IKEA design than the antiques and Victorian moulding style, this router is different from the more conventional routers.

The electronic media is playing a huge role not just in moulding public opinion but in inflaming the government to a very large extent.

As for materials, the printer can use over 200 alloys, and works with the same metal powders that are used for metal injection moulding.

So he snipped some coat hangers, bent them straight, taped them to a piece of wooden moulding, and mounted the strange spear on a tripod.

These later iterations might each take weeks of moulding to fine-tune details, including the precise positioning of the gills and shape of the nose.

Still, many Arab leaders seem genuinely interested in moulding more secular and tolerant societies, even if their reforms do not extend to the political sphere.

It wasn't until I leaned against the wall, hidden by the walk-in closet's moulding that my controller's movement started to get a little jumpy.

Jane has tasked Mark Baartse, formerly a director at a marketing company called First Rate, with moulding her freeform marketing systems into a structured operation.

All this, he reckons, makes digital light synthesis competitive with injection moulding, a mass-production process which has been used in factories for nearly 150 years.

Coastal holiday camps were set up in fascist Italy and Spain during the interwar period with a view to moulding children into perfect healthy national subjects.

Instead of being a cheap polyethylene moulding or a metal pressing, they are fabricated from filaments of carbon fibre wound around a metal or polymer liner.

In addition to offering free Wi-Fi at over 100 railway stations, Google is also moulding its apps and services to cater to the local needs.

The acquisition is the latest in a string of deals by Manchester‎-based THG, set up in 2004 by Chief Executive Matthew Moulding and John Gallemore.

It can also be messy work, mixing up and moulding the plaster, while a prosthetist visiting a rural area must cart around 20133-pound packs of plaster.

Like Njiru she has started moulding bricks at home using mud from a nearby bog to compensate for the lost income from farming – while sheltering from the heat.

Mach, who's previously been nominated for the Turner Prize is heavily influenced by consumerism and known for taking mass produced pedestrian objects and moulding them into unorthodox creations.

The second method is to mix the magnetic materials with a polymer, and then shape the mixture by injection moulding to make what is known as a bonded magnet.

The plastic moulding around the tie-in loops is a great piece of design that helps prevent wear while also doing a great job of keeping the rope centered.

More plausibly, the researchers say Ata's cranial bones were "altered" by the mother's cervix during delivery in a process known as moulding—a phenomenon sometimes seen in severe preterm fetuses.

Dubbed "the King of Cling," Alaïa made a name for himself for his distinctive takes on classic silhouettes, his garments often moulding the body into remarkable and eye-catching proportions.

She points out that the surge of sex hormones people experience during adolescence is thought to cause a great deal of synaptic pruning, moulding a child's brain into an adult one.

Blanchett's embodiment of their words—moulding and adapting them to each scenario—demonstrates the mutability of language and invites viewers to consider the gendered, social, and political contexts that shape disruption.

Widely—and incorrectly—known by by the trademarked name Styrofoam™, this lightweight substance is crafted from petroleum-based polystyrene beads, which are stretched out during an intricate steaming and moulding process.

By pulling the camera as far back as possible, the viewer is treated to intricate images of protagonists' homes, full of opulent chandeliers dangling from high ceilings and encased in gilded moulding.

Major labels have an ongoing reputation that they create pop stars into specific kinds of consumables for their audiences; moulding artists in a way like Dr. Frankenstein would when he created his Monster.

Another advantage of infusing ceramic materials into carbon-carbon composites in this way is that it permits more complex heat-resistant shapes to be produced than is possible with conventional methods of moulding under heat and pressure.

In their analysis in Scientific Reports, Dr Paranthaman's team report that 3D-printed magnets not only retained the magnetism of the materials they were made from, but performed better, in many ways, than those made by injection moulding from similar materials.

FARIDABAD, India (Reuters) - In a dingy factory in the sprawling industrial hub of Manesar in northern India, a plastic moulding machine malfunctioned, mangling Visheshwar Prasad Singh's right hand as he made parts for a supplier to the country's major automakers.

The main house's 100-year-old double-hung oversized windows have gotten a major rehab — as have the columns in the pool cabana and plaster moulding on the curved interior staircase, which were in serious need of some reconstruction, according to the outlet.

"Seed or angel rounds of $1 million or $2 million that could get a software company to a point where Series A investors want to invest in it, those are not enough to get hardware companies through a pilot run, tooling, injection moulding and more," she said.

Prince Jazzbo I Roy, "Step Forward Youth" Fabine, "Prophecy" Ijahman, "Moulding" Leroy Brown and Tramps, "Blood Ago Run" Mawamba Dub, "World, Sound & Power," Chapter Two, track three Pablo Gard, "Beggarman's Child" Colombia Colly, "Jah Lion" Barrington Levy, "Bounty Hunter" Keith Hudson, "Brand Kieth Hudson" Denzil Forrester continues at White Columns (320 W 13th St, Chelsea, Manhattan) through December 17.

This is possible thanks to 3D printing, which allows a user to dictate the exact size, shape and amount of impact damping they provide – previously, users have generally had to make do with off-the-shelf shock absorbing components mass manufacturing using techniques like injection moulding, which means you basically have to choose from a menu of pre-set options.

Bulk moulding compound (BMC), bulk moulding composite, or dough moulding compound (DMC), is a ready-to-mold, glass-fiber reinforced thermoset polymer material primarily used in compression moulding, as well as in injection moulding and transfer moulding. Typical applications include demanding electrical applications, corrosion resistant needs, appliance, automotive, and transit.

In addition to standard injection moulding processes, the company also offers special equipment for areas such as multi-component injection moulding, the processing of thermoset, elastomer and silicone (Liquid Silicone Rubber), gas and water injection moulding technology (GIT, WIT), foaming technology, overmoulding of inserts, PIM (Powder Injection Moulding including: Metal Injection Moulding and Ceramic Injection Moulding) as well as clean room technology. Moreover, Arburg has its own system for additive manufacturing (freeformer).

Other types of fabrication include press moulding, transfer moulding, pultrusion moulding, filament winding, casting, centrifugal casting, braiding (onto a former), continuous casting and slip forming. There are also forming capabilities including CNC filament winding, vacuum infusion, wet lay-up, compression moulding, and thermoplastic moulding, to name a few. The use of curing ovens and paint booths is also needed for some projects.

The part is then quickly cooled for removal from the die. Ceramic injection moulding is much like plastic injection moulding using various polymers for plasticizing. Hot wax moulding largely uses paraffin wax.

The facade has two pillars and two pilasters, as does the space separating the two mandapas. The inner hall leads into three shrine cells sharing a common adhisthana. The adhisthana has four mouldings. It is unusual in lacking a recessed moulding (kantha), an upper fillet (kampa) and a thick moulding (pattika); it has a lower most moulding (upana), vertical moulding (jagati), three faceted moulding (tripatta-kumuda) and a lower fillet (kampa).

The current Jericho Methodist church used to be called Moulding Methodist church. The original Moulding Methodist Church was founded in 1824, built at Higher Moulding, Bircle on a gift of land by Thomas Royds who farmed at Higher Moulding Farm. He was a Methodist Class Leader. The old church was made redundant in 1910 and relocated to the Elbut Lane site.

Moulding is married to Jodie. They live in Northwich, and have four children. He has said that he avoids international travel. Moulding owns a Lamborghini Urus.

End-on shot of 15 different moulding planes. A highly detailed description of each plane is present on the image page itselfIn woodworking, a moulding plane (molding plane in US spelling) is a specialised plane used for making the complex shapes found in wooden mouldings. Traditionally, moulding planes were blocks of wear resistant hardwood, often beech or maple, which were worked to the shape of the intended moulding. The blade, or iron was likewise formed to the intended moulding profile and secured in the body of the plane with a wooden wedge.

This is pelletised for storage and can later be shaped by injection moulding. An external magnetic field is applied during the moulding process, orienting the field of the completed magnet.

Micrograph of a small cell carcinoma showing cells with nuclear moulding. FNA specimen. Field stain. In histopathology, nuclear moulding, also nuclear molding, is conformity of adjacent cell nuclei to one another.

Conformal cooling channel is a cooling passageway which follows the shape or profile of the mould core or cavity to perform rapid uniform cooling process for injection moulding or blow moulding processes.

The moulding design element continues in use in neoclassical architecture.

1975 Stanley No. 55 Universal plane with wide array of interchangeable cutters. While generally considered outdated, a modern furniture shop doing reproduction or restoration work might keep a collection of moulding planes to match original work, or to build in an authentic manner. The earliest known record of a moulding plane is a moulding plane iron of Roman origin unearthed in Cologne, Germany. In modern industry, the work of the moulding plane has been taken up by the electrically powered spindle moulder or wood shaper.

It is contended that the dado decoration (possibly replacing a timber dado moulding similar to that at the Montreal Theatre, Tumut), the second Art Deco motif (used as a centre- piece backing plate for lamps on the false splayed walls), the vine-leaf elements and the rough plasterwork above the dado moulding, and as backing for the vine-leaf elements, were all added around 1935. The less-rough plaster below the dado moulding is similar to that at the Tumut theatre, the material above is quite different. Judging by its covering some of the edge of the egg- and-dart cornice moulding it would appear to have been added after that moulding had been affixed (i.e. in 1929).

Three important commodities manufactured were: brass and sikeer moulding, pen making, fabrication.

Once the panels are inserted the bench joiner will assemble the outer stiles, cramp and ensure the door is square before wedging up the mortise and tenons of the outer stiles. After cleaning up and sanding the face and back of the door he will fit the bolection moulding and cover moulding in the standard way by screwing through slotted holes in the panels into the bolection moulding and then covering the screw heads with the internal cover moulding which is pinned to the frame of the door and not the panel.

Other problems and diseases could be acid rot, algae, fungus diseases and moulding.

Art classes, clay moulding, gardening, etc. are all part of a school week.

The cylindrical fluted hamstone font is lead lined and decorated with cable moulding.

The eastern end of the church features a number of single round arched openings glazed with stained glass panels. The repeated arch moulding is used as a cornice moulding on the octagonal chancel and raked on the two parapeted gables.

The ends of the hall are in the form of shallow apses, with marbled niches, and below the bold cornice runs an egg-and-dart moulding. Both the drawing and dining rooms at Sennicotts have coved ceilings with a bead moulding on the ceiling flat, and an unusual leaf enriched torus moulding at the cornice. Charles Baker lived until 1839, when the estate passed to his nephew, Christopher Teesdale.

Extensive re-moulding of the land surface took place during the Quaternary ice ages.

The doorway is round-headed, with arch crudely repaired. There is plain, square moulding.

Extrusion is similar to injection moulding except that a long continuous shape is produced.

It contains a ring of eight bells, two of which are medieval. The font dates from the 12th century. It consists of a circular bowl with cable moulding, and a circular stem with foliate moulding on the base. It was restored in 1907.

A nailset is a tool used for installing decorative moulding or face-fastening wood flooring.

For example, injection moulding of DVDs involves fabrication of submicrometer-sized spots on the disc.

Moulding of adjacent vertebral bodies towards the midsagittal constriction may or may not be present.

"coving" is also a word for all types of interior mouldings The cavetto moulding is the opposite of the convex, bulging, ovolo, which is equally common in the tradition of Western classical architecture. Both bring the surface forward, and are often combined with other elements of moulding. Usually they include a curve through about a quarter-circle (90°).Summerson, 124 A concave moulding of about a full semi- circle is known as a "scotia".

Moulding played bass on "High Noon", a track on Anton Barbeau's 2016 release Magic Act, and contributed vocals to the title track of Little World, a 2016 collaboration between Barbeau and Sacramento singer Allyson Seconds. Moulding also appeared in both the "High Noon" and "Little World" videos. In 2017, Moulding and former XTC drummer Terry Chambers recorded an EP titled Great Aspirations that was credited to "TC&I;". It was released on 20 October 2017.

In 2012, he appeared on Sherwood's tribute album to Supertramp. In February 2007, Partridge told music website Pitchfork Media that Moulding was "not interested in music any more, and doesn't want to write".pitchforkmedia.com Moulding concurred in having a recent loss of interest in music.

Glue and panel pin a decorative moulding to the top of the skirtings to finish off.

These lamps are extensively ornamented. The materials used to make the lamp are box-moulded, wax-moulded, or loam-moulded. These are made in an open space where fire hazards are of the least concern. To facilitate proper moulding, the key component materials used are: the brown vandal sand exclusively drawn from the Cauvery river bed about 1 km from the Nachiarkoil town used in all types of moulding; "Karuman sand" (used for wax moulding) of pale red colour, available in the town itself; "Savuttu sand", available in light grey colour, used in wax moulding and available in the tank beds in the vicinity of the town.

This is even better adapted for many types of work. Starting in the 1960s, the power tool form of router became the more common form. Modern routers are often used in place of traditional moulding planes or spindle moulder machines for edge decoration (moulding) of timber.

KOLOS are fabricated using plain cement concrete. In order to fabricate KOLOS, three piece steel moulds are used which facilitate easy de-moulding. De-moulding is usually carried out after 24 hours of concrete casting. A single KOLOS unit can weigh from 1.5 tons to 12 tons.

The Moulding Shed has a frame of timber poles and has a gabled roof clad with corrugated iron. It includes storage and loading areas and has a tiny office in one corner. Two kilns with tongue and groove lining with steam pipes set into the ceiling and small covered chimneys are in the Moulding Shed. The Borax Plant is a large steel framed and steel sided box with vertical sliding doors at each end adjacent to the Moulding Shed.

The blacksmith who specialized in moulding gold was a goldsmith. Thus the blacksmiths possess all these skills.

Matthew John Moulding (born February 1972) is a British businessman, and the founder of The Hut Group.

In 1997, Moulding called it the "only real argument" between him and Partridge in the band's history.

The research focuses on the utilization of natural resources as well as of idle waste material for reinforcements of polymers or for use as thermoplastic matrices. The main processing technologies used in composites- production are extrusion and injection moulding. To a lesser content the Institute also applies compression moulding.

Gregory thought it sounded so unlike the band that he suggested Moulding release it as a solo single.

The strickle is keyed to a straight-edge and dragged over the clay until the correct moulding emerges.

A Palladian window stands above the main entrance, and the cornice line is embellished with egg-and-dart moulding, dentil moulding, and a frieze decorated with swags. Andrew Kistler, the owner, was a leather dealer working in Boston. The house was listed on the National Register of Historic Places in 1986.

Zell is home to Zeller Plastik (ZP), an important employer. ZP's importance lies in injection moulding of plastic closures and packaging components; it is a member of the group Global Closure Systems, a worldwide network of businesses that work in plastics. The daughter company Zeller Engineering makes injection moulding equipment.

The Hut Group was founded in 2004 by Matthew Moulding and John Gallemore. Moulding launched the company with a £500,000 investment, focusing on entertainment products such as Music and Gaming. The Hut Group originally created white-label websites for large physical retailers. These included ASDA, Argos Entertainment, Tesco and WHSmith.

It was the first time Moulding and Chambers had played a live gig in decades. In January 2019, a statement released through social media announced that TC&I; had disbanded, and that Moulding has once again put his music career on hold in order to spend more time with his family.

Peabody Museum of SalemSandhu, Kernial Singh., Paul Wheatley, and Hussein Alatas. Management of Success: The Moulding of Modern Singapore.

The two-manual organ was built in 1869 by H. Moulding and Co. The parish registers date from 1657.

Figs. 3217 to 3220 represent examples of the shapes of cutters for use on edge moulding or friezing machines.

The entrance hall contains a fireplace with bolection moulding. Above this is a re-used 16th-century overmantel in Jacobean style with pilasters and arched panels. The main staircase is in the west wing, and has twisted balusters and flat-topped newels. Two of the smaller rooms contain panelling with bolection moulding.

They are decorated in the same way: on the upper part, an Echinus moulding above a broad flat band, on the lower edge there is a concave moulding and another broad flat band. Each panel has three attachment holes in the same locations. These aspects indicate that they were all made together.Fougères, p.

"Gold" frames made without leafing are also available for a considerably lower price, but traditionally some form of gold or metal leaf was preferred when possible and gold leafed (or silver leafed) moulding is still commonly available from many of the companies that produce commercially available moulding for use as picture frames.

Term coined by engineers at MetalCloak. ;Rubbing strip: Plastic/rubber line or moulding to prevent side-swiping along the doors.

After graduating in 1969 he worked in plaster factories (learning plaster piece moulding techniques), fibreglass factories and various bronze foundries.

The doorway is unusual in Ireland, with drip- moulding completely around it, making it similar to the Anglo-Norman style.

The Stingray is actually a Corvette with Stingray colours, not the new Stingray moulding. Only the little VW is unchanged.

Other stresses may be as a result of moulding pressures, extrusion orientation, thermal gradients during solidification and externally imparted stresses.

In plastics processing, dip molding is a process of shaping of plastics by moulding. The coating of components with PVC has many applications. Plastic dip moulding is a technique where metal parts are coated with a plastic vinyl material. It is used to protect and make the metal parts more resistant to scratches and abrasions.

There, however, it no longer formed part of a bed-mould: its use at Santa Sophia was to decorate the projecting moulding enclosing the encrusted marbles, and the dentils were cut alternately on both sides of the moulding. The Venetian dentil was also introduced as a label round arches and as a string course.

Rundgren added a tiple to the blend. Moulding originally sang the song with a deeper voice. He said Rundgren voiced concern that the effect was too close to "a molester", and so Moulding "did the Bowie thing and added an octave above it". The track bookends "Summer's Cauldron" with a reprise of its "insect chorus".

This system can allow for production of one-piece tires and wheels. Two-shot injection moulded keycaps from a computer keyboard Two-shot or multi-shot moulds are designed to "overmould" within a single moulding cycle and must be processed on specialised injection moulding machines with two or more injection units. This process is actually an injection moulding process performed twice and therefore has a much smaller margin of error. In the first step, the base colour material is moulded into a basic shape, which contains spaces for the second shot.

Lower down in the west wall is a two-light window with ogee heads and a square moulding with one mask.

The second and last Dukes album, Psonic Psunspot (1987), included "Shiny Cage", the Moulding song previously rejected for The Big Express.

Almost 80% of the production was exported. On August 1, 1980 the name was changed from "Mir factory" to "Mir Youth factory." In 1983, topyl printing, assembling the toy boxes with PVX glue, moulding, and plastic parts metalling. A the English company Matchbox's technology for the production of toys using the moulding method was licensed during this time.

Following the launch of the iPhone and rising in digital music streaming Moulding shifted his focus to selling other products online, and acquired a number of other e-commerce businesses, including IWantOneOfThose.com, Lookfantastic, MyProtein, Zavvi, and Illamasqua. In 2014, KKR bought 20 percent of the business. In 2013, it was reported that Moulding was considering floating the company.

As of 2016, the company operated 100 e-commerce websites. As of 2018, the company operated 166 websites. In 2018, it was announced that Moulding would be stepping down as CEO to become executive chairman. It was announced in September 2020 that Moulding would become a billionaire following The Hut Group's successful IPO on the London Stock Exchange.

Malmesbury, Wiltshire, being established by Ekco. This was followed by other shadow factories at Aylesbury, Woking, Preston, and Rutherglen. The wartime headquarters of Ekco was based at Aston Clinton House in Buckinghamshire. Following the outbreak of war, the Southend- on-Sea factory was evacuated apart from the bakelite moulding shop whose large moulding presses could not be moved easily.

Moulding won the 2014 Canadian Mixed Curling Championship skipping Team Alberta, which also consisted of his sister Heather Jensen, Brent Hamilton and his then wife Anna-Marie Moulding. The team finished the round robin tied for first with a 9-2 record. They then went on to defeat Ontario (skipped by Cory Heggestad) in the final.

Bed-mould, in architecture, is a kind of moulding found under the cornice, of which it is a part. Similar to crown moulding, a bed mould is used to cover the joint between the ceiling and wall. Bed moulds can be either sprung or plain, or flush to the wall as an extension of a cornice mould.

Drumlins caused by the moulding of sub-glacial sediments are a significant feature of the landscape in the north of the county.

The families returned home after two months; Partridge and bassist Colin Moulding then shared an apartment for the remainder of their stay.

Sheet moulding compound (SMC) or sheet moulding composite is a ready to mould glass-fibre reinforced polyester material primarily used in compression moulding. The sheet is provided in rolls weighing up to 1000 kg. Alternatively the resin and related materials may be mixed on site when a producer wants greater control over the chemistry and filler. SMC is both a process and reinforced composite material. This is manufactured by dispersing long strands (usually >1”) of chopped fiber, commonly glass fibers or carbon fibers on a bath of thermoset resin (typically polyester resin, vinyl ester resin or epoxy resin).

This step is done by continuous glass melting and moulding in single-sided metal moulds. This process is only suitable for high production volumes. For smaller production volumes, the preforms have to be manufactured by mechanical material-removing steps from blocks or slices of raw glass. #Precision glass moulding: In this step the preform is directly formed into an optical glass lens.

A related source of defects are drops, in which part of the moulding sand from the cope drops into the casting while it is still a liquid. This also occurs when the mould is not properly rammed. The second type of defect is metal penetration, which occurs when the liquid metal penetrates into the moulding sand. This causes a rough surface finish.

Skylarking producer Todd Rundgren added a tiple to the blend. Moulding originally sang the song with a deeper voice. He said Rundgren voiced concern that the effect was too close to "a molester", and so Moulding "did the Bowie thing and added an octave above it". On Skylarking, the track bookends "Summer's Cauldron" with a reprise of its "insect chorus".

In 2015, Moulding signed a letter supporting the Conservative Party in the 2015 general election. According to The Sunday Times Rich List in May 2019, he has a net worth of £600 million. In an interview Moulding gave to The Sunday Times in July 2019, he said he earns "about £1 million" a year. He is a supporter of the Seashell Trust.

Further details, such as undercuts, or any feature that needs additional tooling, increases mould cost. Surface finish of the core and cavity of moulds further influences cost. Rubber injection moulding process produces a high yield of durable products, making it the most efficient and cost-effective method of moulding. Consistent vulcanisation processes involving precise temperature control significantly reduces all waste material.

Colin Ivor Moulding (born 17 August 1955) is an English bassist, singer, and songwriter who was one of the core members of the rock band XTC. Though he was less prolific a songwriter than his bandmate Andy Partridge, Moulding wrote their first three charting UK singles: "Life Begins at the Hop" (1979), "Making Plans for Nigel" (1979) and "Generals and Majors" (1980).

Until 2016, Moulding remained largely inactive as a musician. In October 2017, he and Terry Chambers issued a four-song EP, Great Aspirations (credited to "TC&I;"). Its release coincided with a televised documentary film of the band's career, XTC: This Is Pop, which premiered on Sky Arts on 7 October. The documentary featured new interviews with Partridge, Gregory, Moulding and Chambers.

There is a stair turret at the south east corner, and a crenellated parapet. There is a three-light west window under a pointed arch head, with a moulding. There are two-light belfry louvres with moulding. The nave and aisles have three- light windows with stone mullions In the south wall of the chancel there are two two-light windows.

Glass fibre short strands are short 0.2–0.3 mm strands of glass fibres that are used to reinforce thermoplastics most commonly for injection moulding.

The main economic activities are agriculture and animal husbandry. But there are also some factories around the town such as paper, ceramics and moulding.

Box-moulding is used extensively as it is a quicker and cheaper mode of manufacture. Nowadays modern machinery is used to make the lamps.

There was a strong subsidence of the foundation and moulding of the supporting piles. The new Friedrichstadt-Palast has been erected on Friedrichstraße 107.

To Anderson, an acceptable philosophy must have significant 'sweep' and be capable of challenging and moulding ideas in every aspect of intellect and society.

The plastic used in injection moulding is process manufactured, but the components it is shaped into are generally discrete, and subject to further assembly.

Thermoplastic resin pellets for injection moulding Injection moulding uses a ram or screw-type plunger to force molten plastic material into a mould cavity; this solidifies into a shape that has conformed to the contour of the mould. It is most commonly used to process both thermoplastic and thermosetting polymers, with the volume used of the former being considerably higher. Thermoplastics are prevalent due to characteristics that make them highly suitable for injection moulding, such as ease of recycling, versatility for a wide variety of applications, and ability to soften and flow on heating. Thermoplastics also have an element of safety over thermosets; if a thermosetting polymer is not ejected from the injection barrel in a timely manner, chemical crosslinking may occur causing the screw and check valves to seize and potentially damaging the injection moulding machine.

Pyrolytic coating can be used as a protective or decorative coating on equipment parts, energy- insulator on window glasses, anti-friction agent in moulding applications.

On the pitch things were looking up with new manager Chris Burns moulding his former City youth team into a force to be reckoned with.

The moulding sand from below Upnor parish church was used to make metal castings. It was of such a high quality that it was exported.

Military Miniatures is a book of information on history, collecting, assembly of kits, painting techniques, simple and complex conversions, dioramas, and moulding/casting of miniatures.

The windows sit on the window sill on the profiled moulding as same as in the nave. The moulding is also in the presbytery where narrow shafts of the arch ascend from the mouldings. Sculptural decorated heads are situated on the tops of the shafts. On the top of the column heads are closed by slight polygonal profiled covering slabs and pear ribs derive from those slabs.

The case is molded around the transistor elements in two parts; the face is flat, usually bearing a machine-printed part number (some early examples had the part number printed on the top surface instead). The back is semi-circularly-shaped. A line of moulding flash from the injection-moulding process can be seen around the case. The leads protrude from the bottom of the case.

In 2004, Moulding founded The Hut Group, inspired by buying a CD online. He said that he recognised that selling online could be "fundamentally so much cheaper". After investing £500,000 in the company, it took the business three years to break even, initially selling CDs online from the Channel Islands to avoid VAT. Moulding persuaded Sir Terry Leahy and Sir Stuart Rose to become early investors.

Above the main chapel is the "typical" chamber, only accessible from outside, through a trefoil window with the standard Pre- Romanesque features; central arch larger than the side ones, resting on two free-standing capitals with rope moulding, and the upper rectangle framed by simple moulding. Independent from the church structure, though close to its southern facade, stands the bell tower, on a rectangular ground plan.

The German chemists Arthur Eichengrün and Theodore Becker invented the first soluble forms of cellulose acetate in 1903, which was much less flammable than cellulose nitrate. It was eventually made available in a powder form from which it was readily injection moulded. Arthur Eichengrün developed the first injection moulding press in 1919. In 1939, Arthur Eichengrün patented the injection moulding of plasticised cellulose acetate.

Cold moulding is a modern construction method, using wood as the structural component. In cold moulding very thin strips of wood are layered over a form. Each layer is coated with resin, followed by another directionally alternating layer laid on top. Subsequent layers may be stapled or otherwise mechanically fastened to the previous, or weighted or vacuum bagged to provide compression and stabilization until the resin sets.

In classical architecture, the shape of the abacus and its edge profile varies in the different classical orders. In the Greek Doric order, the abacus is a plain square slab without mouldings, supported on an echinus. In the Roman and Renaissance Doric orders, it is crowned by a moulding (known as "crown moulding"). In the Tuscan and Roman Doric capital, it may rest on a boltel.

IR spectrum showing carbonyl absorption due to oxidative degradation of polypropylene crutch moulding Polymers are susceptible to attack by atmospheric oxygen, especially at elevated temperatures encountered during processing to shape. Many process methods such as extrusion and injection moulding involve pumping molten polymer into tools, and the high temperatures needed for melting may result in oxidation unless precautions are taken. For example, a forearm crutch suddenly snapped and the user was severely injured in the resulting fall. The crutch had fractured across a polypropylene insert within the aluminium tube of the device, and infra-red spectroscopy of the material showed that it had oxidised, possibly as a result of poor moulding.

This moulding process allows precise tolerances and detailed shaping, but can sometimes fail to fully saturate the fabric leading to weak spots in the final shape.

The MuCell plastic is injected with gas bubbles during moulding, making a microscopic honeycomb-like structure that is twenty per cent lighter and so lowers fuel consumption.

The authors of the bas-reliefs are a sculptor Sergei Oleshnya, G. Myasnikov and A. Dementiev. The bas-reliefs was cast in the workshop of art moulding.

Superstitions play a huge role in moulding many Taiwanese peoples’ lifestyles, especially during festivities as many superstitions stem from ancient folklore that have been told through generations.

Cycle times for a helmet bag moulding machine vary from 20 to 45 minutes, but the finished shells require no further curing if the molds are heated.

It is sheathed in unpainted weatherboards with five to five and a half inch exposure. The gable roof is covered with round-butt wood shingles with box cornice and crown moulding at the eaves and simple rake with ogee moulding at the gable ends. The first floor windows are 6/6 double hung sashes without shutters. A similar 6/9 double hung sash window is on the principal floor.

The erstwhile Kitmaster company produced an unpowered polystyrene injection moulded model kit for 00 gauge. In late 1962, the Kitmaster brand was sold by its parent company (Rosebud Dolls) to Airfix, who transferred the moulding tools to their own factory; they re- introduced some of the former Kitmaster range, including City of Truro. In time, the moulding tools passed on to Dapol who have also produced the model kit.

Transparent glass vessels printed on it are part of some museum collections. The use of 3D scanning technologies allows the replication of real objects without the use of moulding techniques that in many cases can be more expensive, more difficult, or too invasive to be performed, particularly for precious artwork or delicate cultural heritage artifacts where direct contact with the moulding substances could harm the original object's surface.

The admixture used in box-moulding is clay powder in certain proportion depending on the type of moulding used. Other materials used are white dammar, a type of resin drawn from coniferous trees, and castor oil. Cow-dung cakes are the common type of fuel employed to melt the metal before it is poured into the moulds. Parting sand is used to facilitate easy removal of the moulded product.

This is an important difference from other Reaction Injection Moulding (RIM) systems like polyurethane, since the reaction is not stoichiometric. The 1:1 ratio for DCPD moulding is not critical since this is not a combination of two different chemical elements to form a specific matrix. Significant changes in ratio will slow down the system's reactivity because fewer active reaction nuclei are being formed. This also changes the final properties somewhat.

Injection moulding is used to create many things such as wire spools, packaging, bottle caps, automotive parts and components, toys, pocket combs, some musical instruments (and parts of them), one-piece chairs and small tables, storage containers, mechanical parts (including gears), and most other plastic products available today. Injection moulding is the most common modern method of manufacturing plastic parts; it is ideal for producing high volumes of the same object.

The infiltration of TFP-preforms can be done with conventional processing techniques such as resin transfer moulding, vacuum bag molding, pressing and autoclave moulding. In the case of thermoplastic composites the matrix material and the reinforcement fibers can be placed simultaneously e.g. in the form of films or fibers. The base material can then be a thermoplastic foil which melts during the consolidation process and becomes part of the matrix.

Bezantée moulding showing the use of the disc as a decoration for a Romanesque pier and arcade Bezantée, bezantie or bezanty is an ornamentation consisting of roundels. The word derives from bezant, a gold coin from the Byzantine Empire, which was in common European use until circa 1250. In architecture, bezantée moulding was much used in the Norman period. In heraldry the word is shorthand for semé of bezants, i.e.

Moulding stated that he was not interested in pursuing a tour, as the performances were simply to satisfy "a curiosity", but said that Chambers may continue playing gigs.

Its characteristics are masculinity, strength and solidity. The Doric capital consists of a cushion-like convex moulding known as an echinus, and a square slab termed an abacus.

Moulding is self-taught as a bass player; he was learning rock riffs at the age of 15. He cites Andy Fraser of Free as an early musical influence, and has stated a preference for an intuitive approach to writing and playing rather than study.Doug Interview of Colin Moulding Rundgren Radio (fansite), 7 December 2008, Retrieved 9 December 2008 When writing songs Moulding has used guitars and keyboards rather than the bass guitar. Outside his work with XTC (and their alter-ego side project The Dukes of Stratosphear), Moulding released a non-charting solo single ("Too Many Cooks in the Kitchen" b/w "I Need Protection") in 1980 under the pseudonym "The Colonel". He later played bass and co-produced one track on the 1994 Sam Phillips album Martinis and Bikinis, and in 2005, he contributed to Billy Sherwood's Pink Floyd tribute album Return to the Dark Side of the Moon, playing bass and singing lead vocal on "Brain Damage".

IR spectrum showing carbonyl absorption due to oxidative degradation of polypropylene crutch moulding The polymers are susceptible to attack by atmospheric oxygen, especially at elevated temperatures encountered during processing to shape. Many process methods such as extrusion and injection moulding involve pumping molten polymer into tools, and the high temperatures needed for melting may result in oxidation unless precautions are taken. For example, a forearm crutch suddenly snapped and the user was severely injured in the resulting fall. The crutch had fractured across a polypropylene insert within the aluminium tube of the device, and infra-red spectroscopy of the material showed that it had oxidized, possible as a result of poor moulding.

A painted rim imitating cable moulding runs around the font rim and moulding on the plinth. On the font is a painted font cover by Christopher Turnor to the design of staircase panels at Stoke Rochford Hall. The font cover panel paintings, depicting the childhood of Christ, are by Jessie Bayes, who also painted the image "Our Lord in Glory" on the down face of the lowered chancel ceiling."Jessie Bayes", Clerkenwell Fine Art.

The plastic grips are unnecessary and the device could still be operated without them. They provide enhanced ergonomics so the user does not have to press their fingers against sheet metal. Injection moulding of thermoplastics are normally used through the use of an automated injection moulding machine, which shoots liquid plastic into a mould where it is left to set. Such processing is commonplace, not very labour-intensive, cheap, and capable of producing high quantities.

Moulding was born in Burnley, Lancashire, and attended Ss John Fisher and Thomas More Roman Catholic High School in Colne. Moulding studied industrial economics at the University of Nottingham before going on to qualify as a chartered accountant. His father was a tarmac contractor and his mother was an antiques trader. He went on to work at the Caudwell Group, where he became finance director of its distribution business, working directly with John Caudwell.

Paper clip mould opened in moulding machine; the nozzle is visible at right Injection moulding machines consist of a material hopper, an injection ram or screw-type plunger, and a heating unit. Also known as platens, they hold the moulds in which the components are shaped. Presses are rated by tonnage, which expresses the amount of clamping force that the machine can exert. This force keeps the mould closed during the injection process.

Pearson, Wendy: Cotteridge through time (Amberley 2011) p44 Rubberplas BSP Ltd, Mary Vale Road, manufactures Rubber Moulding, Thermoplastic Moulding & Vacuum Metallizing for automotive and domestic industries. It also launched the Golf Grass Mat used to install permanent or temporary walkways around Golf Courses. Edwin Showell and Sons: Showell and Barnes were founded in 1790, in Loveday Street. By 1820 they were trading as Edwin Showell and Sons, manufacturing door springs and architectural brassware.

In the US, "Mayor of Simpleton" (1989) was their highest-charting single, while "Dear God" (1986) was controversial for its anti-religious message. The group also inspired tribute bands, tribute albums, fan conventions, and fanzines across the UK, US and Japan. In 2006, Partridge announced that his creative partnership with Moulding had disintegrated, leaving XTC "in the past tense". Moulding and Chambers briefly reunited as the duo TC&I; in the late 2010s.

Moulding had been playing bass since 1970 "because I liked music [and] I thought that playing a bass, with four strings, would be infinitely easier than playing a guitar, with six strings. That was a horrible misconception!". At the end of 1972, Moulding and drummer Terry Chambers joined Partridge's band, replacing Nervous Steve and Paul Wilson, and the group was renamed "Star Park (Mark II)". Other members would frequently join and leave the group.

Their recording approaches differed in that Moulding sometimes preferred spontaneous or imperfect performances, whereas Partridge working method was to refine a song through repeated takes. The band occasionally took to the term "Andy-ness" to describe Partridge's studio indulgences. Despite this, they rarely found themselves encumbered by serious creative differences. In 1997, Moulding called one dispute over a Skylarking bass part the "only real argument" between him and Partridge in the band's history.

The dominant use of hexamethylenetetramine is in the production of powdery or liquid preparations of phenolic resins and phenolic resin moulding compounds, where it is added as a hardening component. These products are used as binders, e.g. in brake and clutch linings, abrasive products, non-woven textiles, formed parts produced by moulding processes, and fireproof materials. It has been proposed that hexamethylenetetramine could work as a molecular building block for self-assembled molecular crystals.

Polyester resins are unsaturated synthetic resins formed by the reaction of dibasic organic acids and polyhydric alcohols. Maleic Anhydride is a commonly used raw material with diacid functionality. Polyester resins are used in sheet moulding compound, bulk moulding compound and the toner of laser printers. Wall panels fabricated from polyester resins reinforced with fiberglassso-called fiberglass reinforced plastic (FRP)are typically used in restaurants, kitchens, restrooms and other areas that require washable low- maintenance walls.

Plastisol is the most used material for dip moulding because it is easy to use and affordable. Other materials are used, such as latex, leneoprene, polyurethanes, silicones and even epoxy.

Small, Pauline. Sophia Loren: Moulding the Star, p.77. Intellect Books, 2009. In 1960 he won a Nastro d'Argento for best cinematography for his work in Alessandro Blasetti's European Nights.

Aside from agriculture, Revivim has interests in a variety of industries including an injection moulding company ("Raviv") and a company that designs and produces valves for automotive fuel systems ("Raval").

Both tool-halves are therefore tempered at a different temperature with typical values of 60 °C and 80 °C. Typical cycle times for moulding parts range between 4 and 6 minutes.

Most of the Spiders came in Lucerne Silver with a blue side moulding and featured black and blue accented cloth seats. Several of these cars have been imported into the UK.

Robin has been a key figure in the moulding of many of the creatures for Harry Potter and The Goblet of Fire as well as special effects in The Last Samurai.

Several metal consolidation techniques are used to produce the final product. Metal injection moulding (MIM) otherwise known as powder injection moulding is a well-established and cost-effective method of fabricating small-to-moderate size metal components in large quantities. It is derived from the method plastic injection moulding, whereby mixing of a metal powder with a polymer binder forms the feedstock, which is then injected into a mould, after which the binder is removed via heat treatment under vacuum before final sintering. With titanium however, the binders used in MIM results in the introduction of carbon into the matrix due to insufficient binder removal prior to sintering and/or deleterious reactions between the decomposing binder, the debinding atmosphere, and the metal phase.

The first level contains the door arch with has moulding and a seal and is supported by two Doric columns. The upper portion contains a window with moulding with Doric columns in each side, decorated with curves and vegetable motifs. The crown at the top contains a sculpture of the Archangel Michael in a niche flanked by Doric columns. The side portal is an arched entrance with Tuscan columns and cornice and a cross in relief at the midpoint.

Upper floor windows are butted against the eave, with a narrow band of dentil moulding, while ground floor windows and the entrance are topped by slightly projecting and splayed lintels. The entrance flanked by narrow moulding and has a transom window with five panes in the shape of a tombstone. Above the entrance is a three-part window with narrow side windows. The interior is architecturally distinguished, and there is a later ell extending to the rear.

Compression moulding offers excellent detailing for geometric shapes ranging from pattern and relief detailing to complex curves and creative forms, to precision engineering all within a maximum curing time of 20 minutes.

Harkin-Jones studied mechanical engineering at University College Dublin, and received first class honours in 1983. She completed her PhD at Queen's University Belfast working on materials for rotational moulding in 1992.

Because the resins shrink about 6% in volume during reaction, these presses (also called clamping units) don't have to handle high pressures such as for Sheet Moulding Compound (SMC) or expanding polyurethane.

FRP involves two distinct processes, the first is the process whereby the fibrous material is manufactured and formed, the second is the process whereby fibrous materials are bonded with the matrix during moulding.

The town's economy consists of nearly 1,000 various enterprises, of which 24 are medium-sized employing 2,200 people. The most important industries are machine assembly, semiconductors, injection moulding, magnetics, dyes, and shoe manufacturing.

"Grass" is a song written by Colin Moulding of the English rock band XTC, released as the lead single from their 1986 album Skylarking. It reached number 100 on the UK Singles Chart.

Moulding techniques for plastics also improved, allowing lens optics to be improved and cost reduced. Incandescent bulbs were replaced first by sealed-unit halogen lamps and later by high-output light emitting diodes.

For Hitler, the acquisition of land and soil was requisite in moulding the German economy.Ian Kershaw, Hitler, the Germans, and the Final Solution (New Haven & London: Yale University Press, 2008), pp. 52–53.

CD moulding machines are specifically designed high temperature polycarbonate injection moulders. They have an average throughput of 550-900 discs per hour, per moulding line. Clear polycarbonate pellets are first dried at around 130 degrees Celsius for three hours (nominal; this depends on which optical grade resin is in use) and are fed via vacuum transport into one end of the injection moulder's barrel (i.e., the feed throat) and are moved to the injection chamber via a large screw inside the barrel.

South door Detail of south door Portrait head on right of south door The chief entrance is a south-facing porch with an inner and outer arch. The outer arch is ornamented with cable moulding and foliage. On one of the spandrils of the inner arch, which is made of Caen stone, is the monogram i h c, while on another can be found an encircled Greek cross. An arched west doorway includes carved moulding and carved heads are used as label stops.

The second type of extruder is a screw, or auger, type where a screw turns forcing the material to and through the die which again shapes the part. In both types of extrusion the raw material must be plasticized to allow and induce the flow of the material in the process. Complex technical ceramic parts are commonly formed using either the injection moulding process or "hot wax moulding." Both rely on heat sensitive plasticizers to allow material flow into a die.

The number of cavities incorporated into a mould directly correlate in moulding costs. Fewer cavities require far less tooling work, so limiting the number of cavities lowers initial manufacturing costs to build an injection mould. As the number of cavities play a vital role in moulding costs, so does the complexity of the part's design. Complexity can be incorporated into many factors such as surface finishing, tolerance requirements, internal or external threads, fine detailing or the number of undercuts that may be incorporated.

Traditionally, the injection portion of the moulding process was done at one constant pressure to fill and pack the cavity. This method, however, allowed for a large variation in dimensions from cycle-to- cycle. More commonly used now is scientific or decoupled moulding, a method pioneered by RJG Inc. In this the injection of the plastic is "decoupled" into stages to allow better control of part dimensions and more cycle-to-cycle (commonly called shot-to-shot in the industry) consistency.

Hemmings created all the necessary parts for the carriage; his relative Joseph Fossett completed the ironwork; and another relative Burwell Colbert painted the finished carriage. The finished product was a source of great pride for Jefferson. John Hemmings had some woodworking signatures that help distinguish his work from that of other workers at the Monticello Joinery. They include attaching shelves to the sides of a cupboard, using a double-bead moulding on the front of shelves, and curving the moulding on bed frames.

The 2010 model received slight changes from the 2009 model, including, upgraded Öhlins steering damper, headlights were recessed into the fairing and the individual fairing centre section pieces where now fused into one moulding.

Trend Technologies,Injection Moulding, Plastic Mouldings, Medical Devices, Automotive Components -Trend Technologies . Trendtechnologies.ie. Taconic International,Taconic Corporate Homepage . 4taconic.com. and Mullingar Pewter. The town is home to a €25m Lidl warehouse and distribution centre.

The longer fibers in SMC result in better strength properties than standard bulk moulding compound (BMC) products. Typical applications include demanding electrical applications, corrosion resistant needs, structural components at low cost, automotive, and transit.

The first floor has seven windows, each of which is flanked by paired orange columns and headed with a pointed arch, with a V-shaped stone moulding above similar to that above the main entrance.

Dark red brickwork with full-height brick pilasters and decorative light red brick lintels cornices. Sandstone moulding at base of pilasters. ;Classroom Block Two-storey rendered brick building with neo-classical detailing. Terracotta tiles roof.

The west corners have five-stage diagonal buttresses. It has a crenellated parapet with pinnacles. At the north-east corner there is a vice (spiral stair). There are two-light belfry louvres with hood moulding.

Compared to the moulding of inanimate objects, lifecasting poses some specific challenges and risks. Since the mold is made directly on the skin of the model, for safety and health reasons the molding materials must be non-toxic. The mould must not heat up too much or else discomfort and even severe burns could occur. The moulding process must also be completed within a relatively short time frame, usually a half-hour or less, since people have limited endurance in holding a stationary pose.

Archival-quality corrugated boards, both paper and plastic, are sometimes used, and foam-core boards that are described as being archival quality are also used. As with many details of good framing, the advice of an expert is valuable. Behind the backing board(s), retaining clips or brads hold the package in place, mirroring the restraint provided by the lip of the moulding at the front of the frame. A dust seal (usually sturdy archival- quality paper) is adhered, over the back of the moulding.

The spindle router is positioned at the finer end of the scale of work done by a moulding spindle. That is to say it is able to cut grooves, edge moulding, and chamfer or radius the edge of a piece of wood. It is also possible to use it for cutting some joints. The shape of cut that is created is determined by the size and shape of the bit (cutter) held in the collet and the depth by the depth adjustment of the sole plate.

A core is a device used in casting and moulding processes to produce internal cavities and reentrant angles (an interior angle that is greater than 180°). The core is normally a disposable item that is destroyed to get it out of the piece.. They are most commonly used in sand casting, but are also used in die casting and injection moulding. For example, cores define multiple passages inside cast engine blocks. One model of GM V-8 engine requires 5 dry-sand cores for every casting.

The ogee and Roman ogee profiles are used in decorative moulding, often framed between mouldings with a square section. As such, it is part of the standard classical decorative vocabulary, adopted from architrave and cornice mouldings of the Ionic order and Corinthian order. Ogees are also often used in building interiors, in trim carpentry, for capping a baseboard or plinth elements, as a crown moulding trim piece where a wall meets a ceiling, and in similar fashion, at the tops of pieces of case furniture.

Parian could also be hand-crafted rather than the usual moulding, the production of a rose by an artisan is described in 1859, though it is not clear if this is in Minton's factory or Copeland's.

BS 1363 (upper) & Schuko (lower) plugs. Modern injection moulding technology enables robust and safe plugs to be smaller than the Schuko and BS 1363 systems, which were designed in the early and mid 20th century respectively.

The Swan 100 was designed by German Frers and built by Nautor's Swan and first launched in 2002. Originally launched as th 100RS the S and FD version were later developed to use the hull moulding.

Jetting Jetting is an moulding defect that can occur in the manufacturing process of injection muolding. Jetting is a snake-like stream which occurs when polymer melt is pushed at a high velocity through restrictive areas.

Heather Jensen (born March 8, 1985 as Heather Moulding) is a Canadian curler from Crossfield, Alberta. She most recently played third for the Nadine Scotland rink on the World Curling Tour, during the 2017-18 season.

The roof lines are lined with dentil moulding with paired brackets. It is one of the finest Second Empire houses in the city. On September 4, 1986, it was added to the National Register of Historic Places.

The cornice of the flat roof is decorated with brick dentil moulding and modillions. The building was listed on the National Register of Historic Places in 1983, and included in the Murphy-Hill Historic District in 2007.

Ealing and Acton Gazette. It is in the Gothic Revival style with Kentish rag- stone walls. Fine-grained Bath stone has been used for the moulding around the windows. It was completed for a cost of £16,000.

The 2-1/2 story wood frame house was built in 1868, and is one of the only bracketed Italianate houses to survive in East Cambridge. It has a front-facing gable whose cornice includes dentil moulding and brackets, and whose fully pedimented gable end has a round-arch window in the tympanum area. The main roof cornice also has dentil moulding and paired brackets, and the front windows have slightly projecting lintel caps. The house was listed on the National Register of Historic Places on April 13, 1982.

Matki earthen pot, a clay vase exhibition Matki earthen pot is one of the handicrafts of Pakistan, especially in Rawalpindi and Islamabad are the main regions in country where people use and craft "matki" pots. Ralli quilt, a traditional blanket of Sindh The traditional blankets or textiles are mainly created by Sindhi artisans. They use simple tools to produce Ralli quilt. clay moulding tradition in Pakistan Pakistani clay moulding dates back to British raj when some of its regions, especially "Leh Nullah" artisan used to create clay utensils.

The service books containing the specific offices for the three periods are named Triodion, Pentecostarion and respectively Octoechos. The three periods are therefore better known by the names of their respective offices. On the portal from Sârbi Susani we can first distinguish the moulding rope carved in relief protecting the entrance and the composition. Starting from the coiled moon at the left and going round to the other coiled moon at right, the moulding rope represents the ecclesiastic year as a whole, from the month of September to August, according to the Byzantine practice.

In rare cases some models can have allergic reactions to moulding materials, can faint from holding a stationary pose for too long, or can experience anxiety from being enclosed in the mold. However, far from always being a negative experience, many models actually find the experience enjoyable. The necessity of an extended stationary pose and the feeling of being enclosed by the warm moulding materials leads some to feel extreme relaxation or even enter into meditative states. In relaxed poses some models even fall asleep while being lifecast.

Screens facing the stalls are of cusped ogee arches and quatrefoils in open fretwork moulding; the altar rail is of similar style. Behind the stalls are pews, originally belonging to the manor houses of Easton and Stoke Rochford. Between the aisles and chancel chapels at the north and south are 19th-century low wooden screens, with a run of seven double panels; plain below, those above with decorative insets, the central and outer of quatrefoils. Above the paneling runs open fretwork moulding of cusped ogee arches leading to quatrefoils between, below a top rail.

View towards the main chapel. From the outside, a striking aspect of Silves Cathedral is the contrast between the whitewashed surfaces of the walls and the red sandstone (grés de Silves) of the apse, windows and main portal. The main portal, executed in the 1470s, is inserted on a stepped rectangular moulding (alfiz), a common feature on the façades of Portuguese mediaeval buildings since the Romanesque era. Other primitive features of the portal are the figurative corbels of the upper cornice of the moulding, representing animal and human faces.

Above the entrance is a Palladian window with a rounded center that breaks the moulding at the roof eave. The front gable is fully pedimented, with dentil moulding around the edges and a Federal style semi-oval fan at the center. The building is believed to have been built about 1809-10 for Giles Griswold, a merchant; its design has been speculatively attributed to New Haven architect David Hoadley. It has passed through a succession of owners, some of whom operated a tavern on the premises in the 19th century.

" Moulding did not have "any problem with Todd", instead feeling that Partridge was "so unhappy and taking it out, a little bit, on me." Rundgren had listened to The Big Express and concluded that the group had "lost track" of their studio indulgences. His style of embracing technical mistakes without allowing the members a chance to fix them was also a source of contention. Partridge often stated that this was because Rundgren wanted to spend as little money as possible, while Moulding said: "I don't believe that was the only reason.

This greatly improved design flexibility as well as the strength and finish of manufactured parts while reducing production time, cost, weight and waste. By 1979, plastic production overtook steel production, and by 1990, aluminium moulds were widely used in injection moulding. Today, screw injection machines account for the vast majority of all injection machines. The plastic injection moulding industry has evolved over the years from producing combs and buttons to producing a vast array of products for many industries including automotive, medical, aerospace, consumer products, toys, plumbing, packaging, and construction.

The 1891 section has an ornate parapet broken by a central gable and small gable roof entry lobby. This gable has an open-bed pediment above the central front opening. The openings on either side of the entrance have rectangular windows surmounted by an arched concrete moulding descending to a dripstone and broken by a keystone. The pair of windows either side of the entrance and side windows are casement windows and are delineated by concrete moulding that is horizontal beneath the sill and outlines the arch of the window shape.

The Hydraulic Pump Station is a three-storey Italianate/Baroque facade with rich decorative plaster/stucco elements. It features detailing includes matching pairs of pedimented dummy windows with square Corinthian pilasters flanking a central arched window on each storey, also with Corinthian pilasters plus stucco moulding and keystone. The arched windows are repeated on the second storey sides, below a circular vent, also with stucco moulding. The ground storey features stucco quoins which extend on the eastern side to simulate ashlar masonry on the facade on an extension which also features ornate Italianate plasterwork.

There are several techniques for conducting the in-mould labelling process. Vacuum and compressed air can be used to handle the labels, also static electricity can be used. Electrostatic charging electrodes charge a label while it is being transferred to the moulding machine, so that when the label is placed on the tool and released by the labelling robot, it will wrap itself onto the tool. Most robot systems for placement of labels are not required for specific moulding machines and can be used with up to date presses with fast clamping systems.

While there, Darby recruited skilled 'Dutchmen' to operate a brass battery with trip hammers. He may also have recruited men skilled in sand moulding as opposed to the loam moulding hitherto used in England. Darby was the active partner in the business, but later withdrew to concentrate on his new ironfounding business at Coalbrookdale. Brass production at the Baptist Mills Brass Works ceased in 1814, and in 1839 parts of the former brass works were acquired Joseph and James White, who established a factory manufacturing "Egyptian Black" pottery, Rockingham teapots and clay tobacco pipes.

The resulting paste was then moulded and pressed into bricks in the moulding shed, and then dried out in drying sheds. Originally bricks were made using moulding and wire cutting, but were later made using a press. After drying, the bricks were then fired in one of the three circular down-draught kilns (also known as beehive or Newcastle kilns), made of brick with iron bands and domed roofs. The brickworks also includes the remains of a boiler house, which contained a Five-drum Stirling boiler, and a small engine house for a steam engine.

Resin transfer moulding includes numerous varieties which differ in the mechanics of how the resin is introduced to the reinforcement in the mould cavity. These variations include everything from the RTM methods used in out of autoclave composite manufacturing for high-tech aerospace components to vacuum infusion (for resin infusion see also boat building) to vacuum assisted resin transfer moulding (VARTM). This process can be performed at either ambient or elevated temperature and is suitable for manufacturing high performance composite components in medium volumes (1,000s to 10,000s of parts).

Colin Moulding has described the song as "a little chant from the terraces" concerning redevelopment in Swindon Town Centre. Moulding felt that "the whole Swindon area seemed to be under the hammer", citing the 1978 demolition of the Baptist Tabernacle in favour of a car park as an example. Musically, Andy Partridge has said the song was based on The Beatles' Getting Better. Allmusic's Ned Raggett considers the song to have a "jaunty music-hall style" that "shows the band's appreciation for older styles of English pop starting to come through".

In the archaic Greek Ionic order, the abacus is rectangular in plan, owing to the greater width of the capital, and consists of a carved ovolo moulding. In later examples, the slab is thinner and the abacus remains square, except where there are angled volutes, where the slab is slightly curved. In the Roman and Renaissance Ionic capital, the abacus is square with a fillet on the top of an ogee moulding with curved edges over angled volutes. Individual sections of the column and as constructed by ancient Egyptians, Greeks and Romans.

By controlling the amount and direction of the flow, it is thus possible to influence the fibre orientation, having a quasi-isotropic material (low-flow moulding) or higher performances in a desired direction (high-flow moulding). During the manufacturing phase, it is also important to avoid, when possible, defects like weld- lines. Weld lines occur when two flow fronts of material meet during the filling of a mold cavity. This can sometimes result in air entrapment, inhibited crosslinking in the polymer matrix, or the clumping or absence of fibers.

The 2009 Sunset Moulding YCRC Challenger was a professional tennis tournament played on hard courts. It was part of the 2009 ATP Challenger Tour. It took place in Yuba City, United States between 1 and 7 June 2009.

And they rest on prominent corbels with classical moulding. Wrought iron is used about the window sills, but cast iron has been avoided. The verandah posts are of wood with fretted wood brackets. The gables are carved elaborately.

54m E-W x 52m N-S). E gable contains a square-framed, double-cusped window with hood-moulding and upturned stops. Above it is a second window with similar jambs, set off centre. (Davies 1948, p.110).

The pedestal stands on four octagonal steps. It is square with four angular fluted pilasters. On each side are inscribed panels; the inscriptions are weathered and illegible. Above the panels is a cornice with egg and dart moulding.

Revised and Updated Edition. Checkmark Books: New York, 2001. Their moulding process gives them a flattened shape with an equatorial rib. They are sold loose by weight in paper bags, traditionally in "quarters"—a quarter of a pound.

A plaster cornice with decorative moulding is also visible inside. The pulpit, also with decorative mouldings, was installed in the early 19th century. Memorials include monuments in the graveyard commemorating Henry Booker (d. 1799) and his wife Sarah (d.

One of the largest employers for residents of Arlington is the Orvis company in neighboring Sunderland. Mack Moulding is the largest employer in Arlington by far. Orvis has its offices in Sunderland and a retail outlet in Manchester Center.

This rather modern approach provided a much stiffer and stronger hull, provided that the caulking could keep the water out and prevent deterioration of the linen and the adhesive. Linen build was perhaps a precursor of cold moulding (below).

Moving the church to a more accessible site is commemorated by inscriptions carved on the south wood moulding: > Rebuilt here 1896 M.J. Milling Vicar. E. Manners R. Bolton Ch. Wardens. > C.E. Ponting Architect. W. Light and J. Smith Builders.

Wings of white and Norway spruce seed can be removed by dampening the seed slightly before it is run through a fanning mill for the last time. Any moistened seed must be dried before fermentation or moulding sets in.

ASA-PVC compounds are in use. ASA can be processed by extrusion and coextrusion, thermoforming, injection molding, extrusion blow molding, and structural foam molding. ASA is mildly hygroscopic; drying may be necessary before processing. ASA exhibits low moulding shrinkage.

Electrospark deposition is a micro-welding manufacturing process typically used to repair damage to precision or valuable mechanical components such as injection moulding tools. This process may also be referred to as "spark hardening", "electrospark toughening" or "electrospark alloying".

Sir Alexander Anderson of Blelack (1802-1887) was a 19th-century Scottish advocate and politician who served as Lord Provost of Aberdeen from 1859 to 1866 and is viewed as one of the major forces in moulding the city.

"A body design that makes this magnificent seven-seater even more than ever like a £1,000 car. Its streamline front, waistline moulding and petrol tank housing, all new, enhance its superb lines".The Austin Motor Company Ltd. Display ad.

Team Incident, in association with the Centre for System Design. NITK Surathkal, have come up with a plastic recycling initiative to recycle plastic wastes from the beach using injection moulding to create small, useful products like keychains, clips etc.

The interior is a tall granite arcade with three bays. It has piers with moulded cup capitals and 4-centred moulded arches. The nave and north aisle have excellent barrel vault ceilings. These are original, and have high relief moulding.

The interior dimensions are . Its present appearance dates from a reordering in 1877. Across the east end is a panelled timber gallery and a cornice with decorative moulding. There was originally a baptistery (no longer extant) on the south side.

Stuart, Philip. Decca Classical 1929–2009, accessed 14 October 2013. Headington comments on "a thoughtful word delivery and a sensitive moulding of quietly flowing phrases, but also a certain whiteness of tone … a kind of English cathedral sound."Headington, pp.

The plinth, with cyma-moulding, sits on a wide, five terraced base; the five steps symbolise the number of years of World War I.West Hartlepool War Memorial. North East War Memorials Project. Retrieved 4 September 2012.Edwards, Martin (6 December 2005).

Next to each pylon is a seat, also made of stone and wrapping around but not touching the base. They are about off the ground, supported on small columns, and have decorative moulding. They are separately listed at Grade II.

However, part of the main structure that stood until 1964 "embodied a string-course scroll moulding which suggested a late-Decorated date of around 1300", and there may have been an earlier, moated site adjacent to the palace's southern side.

"The Meeting Place" is a song written by Colin Moulding of the English rock band XTC, released on their 1986 album Skylarking. It was the second single issued from the album and reached number 100 on the UK Singles Chart.

Focusing on her musical technique and frequently playing live, in this period Steele became a highly regarded bassist noted for her melodic style and rich tone, influenced by bassists such as Paul McCartney, John Entwistle, Colin Moulding and Carol Kaye.

The toy stood about 18 inches tall (roughly 46 cm). Mr. Machine was primarily made of plastic. This was unique for its time. Innovations in plastic and injection moulding allowed toy manufacturers to produce parts less expensively than previous manufacturing techniques.

' [laughs] 'Nobody's told me the chords! What'll we do?'" The project consumed only three reels of tape: one for side one, another for side two, and a third for extras and leftover tracks. Moulding remembered that "one track ran into another.

The company had produced injection moulding equipment since 1957. In 1964 the company Eckert & Ziegler GmbH was taken over. In 1986 the plastics equipment division was separated and became Krauss Maffei Plastics Engineering, and in 2000 took over the relevant trademarks.

CIDRs were developed by AHI Plastic Moulding Company in Hamilton, New Zealand, in conjunction with the Ministry of Agriculture and Forestry (New Zealand). Developmental trials began in 1981. The CIDR-S was licensed in 1986 and the CIDR-G in 1988.

The church ruins consist of the west gable and part of the south wall. The west door jambs have chevron carvings on the architrave moulding. Five carved heads, a greyhound and a stone with dog-tooth decoration are over the door.

The 2014 Canadian Mixed Curling Championship was held from November 14 to 23 at the Rideau Curling Club in Ottawa, Ontario. Alberta's Darren Moulding defeated defending champion Cory Heggestad of Ontario in the final with a score of 8–5.

Above it is the transition moulding which is in three stages-torus (semi- circular), cyma reversa, and cavetto, taking the lower part of the structure just over above the ground. Greenberg describes this section as "quietly establish[ing] the memorial's overall character: an outward appearance of simple repose which, on close observation, shows itself to be dependent on the more complex forms of its masses".Greenberg, p. 13. At the top, the coffin is connected to the main structure by its own base of two steps, the transition smoothed by a torus moulding between the bottom step and the pylon.

The cooling group was provided by Serck and used two radiators in a removable pack in the roof over the Nº1 end and the Spanner Swirlyflow steam heating boiler. Air was drawn in from the sides, through the panels, and exhausted upwards in the centre by two electric fans. The main roof section, above the engine, was unusual in that it was a translucent fibreglass moulding, which provided light into the engine room, despite the body's small windows. This lightweight moulding could be raised upwards by pneumatic cylinders when stationary, to act as an air vent before needing access to the engine.

Mottau's first solo album, NO TURNING AROUND, was released in 1973 on MCA Records, produced by Stookey, and featuring a wide range of guest artists including Pappalardi, Jimmy Nalls (later to become one of the original members of SEA LEVEL) and baritone saxophonist, jazz great Gerry Mulligan. Mottau also played guitar on Lennon's 1974 album WALLS AND BRIDGES, and also ROCK 'N' ROLL, released in 1975. Mottau's next solo album, NO MOULDING, was released in 1977 by Neworld. Along with NO TURNING AROUND it was later reissued on CD. NO MOULDING was re- released in digitized format in the fall of 2020.

The erstwhile Kitmaster company produced an unpowered polystyrene injection moulded model kit for 00 gauge. In late 1962, the Kitmaster brand was sold by its parent company (Rosebud Dolls) to Airfix, who transferred the moulding tools to their own factory; they re-introduced some of the former Kitmaster range, including the BR Standard 9F class locomotive. In time, the moulding tools passed on to Dapol who have also produced the model kit. During the 1960s a cast white metal chassis kit in the Simplas range to motorise the model was made available by Wilro Models of Clarence Road, Hackney, London.

Many industrial and trading companies have settled in Soltau. There is a wide range of firms in the metalworking and mechanical engineering sphere including: Röders-Tec (high-speed cutting milling machines, blow moulding, pewter), G.A.Röders (die casting, injection moulding, toolmaking), Röhrs AG (plant manufacturing, industrial building, power plant services), Saxlund International (hauling engines, pumps), Nortec (mechanical engineering) and Colt International (technical building protection). In the food industry are firms like Harry-Brot (bread, cakes and pastries) and H&S; Tee Pack Service (teabag packers) and in textiles: Gebr. Röders AG (felt) and Breiding (bedsprings) (founded 1836).

M. A. Dhaky and Nanavati has classified this temple of Vimanakara type due to its shikhara (spire) with neo-Dravidic subtype. The east-facing temple is a sandhara (sanctuary with an interior ambulatory) type temple with its adhisthana (base) visible at the few places. The sequence of carvings is as follow: large padma (inverted cyma recta), kusuma, vajana ("plank-edge" moulding), kandhara (necking), uttara (beam), urdhvapadma (upper cyma moulding), kapota (roll cornice) and pattika (plain band). Padma is not yet evolved into Kumbha (pot) visible in future Nagara class temples and kumuda are very large and not yet evolved in kalasha (urn).

Like all industrial processes, injection moulding can produce flawed parts. In the field of injection moulding, troubleshooting is often performed by examining defective parts for specific defects and addressing these defects with the design of the mould or the characteristics of the process itself. Trials are often performed before full production runs in an effort to predict defects and determine the appropriate specifications to use in the injection process. When filling a new or unfamiliar mould for the first time, where shot size for that mould is unknown, a technician/tool setter may perform a trial run before a full production run.

On Moulding's bass-playing, Partridge praised his "old-fashioned" tendency to match notes to the bass drum. In Song Stories, Neville Farmer comments that Partridge "is the boss—erratic but willful [and] runs the band on instinct", while Moulding "is the voice of calm ... a foil to Andy's radical side." Music journalist Peter Paphides felt that the songwriters' personalities "couldn't seem more different," with Moulding "phlegmatic, shy, and heartbreakingly pretty" and Partridge an "art-school dropout ... uptight, dominating and extrovert." In Moulding's view, Partridge also typically acted as an "executive producer" for albums while frequently undermining the authority of the actual credited producer.

The present curtains are blue for the stage and nothing in the archways. The former heritage adviser for Junee Shire Council, David Scobie, believes the present colouring of the false splayed walls and dress circle front was done at the time of the making of the film The Crossing (1990). A photo on the Theatres and Public Halls administration files, taken after it had become the JADDA Centre, shows a colour scheme of grey, white and blue (the dado moulding being blue). In The Crossing, for the dancing competition scene, the dado moulding is bright red and the walls white to off-white.

"Generals and Majors" is a song written by Colin Moulding of the English rock band XTC, released as the first single from their 1980 album Black Sea. Moulding accordingly wrote the song as a satirical take on the phrase "oh, what a lovely war". The song charted in the UK single chart at No. 32 and No. 104 on the US singles chart, while reaching No. 28 on Billboard's Album Rock Tracks chart. It was the first XTC single to chart in the U.S., and it also had chart success in Canada, Australia and New Zealand.

The prepreg sheets of SMC are made after the viscous assembly is compacted via rollers. In this phase, any control over the orientation of the fibres is generally impossible, and the fibres can be considered to have an equiprobable orientation in all directions. Once the prepreg sheets are made, the material can be compression moulded into the final desired shape. Compression moulding is a manufacturing technique that requires a two part mould: the first one hosts the moulding material (charge), while the second one is mounted on a press to close the cavity while applying high pressure.

One of the mouldings, the cyma moulding, has carved dolphins, shells, and tridents. These particular symbols refer to Venus and the sea. There were three fountain basins: one at the front of the facade and one on either corner of the Temple.

Originally based in Upholland, Lancashire the company later moved to Stoke on Trent. The first cars were made in 1985 and used a Mini bodyshell as the passenger compartment later replaced by a glass fibre moulding. The company has supplied over 1,500 kits.

The portal is unusually stretched along the wall. The dome tholobate contains twelve windows, half of them false, as common at that time. Another interesting feature can be seen on the interior pillars. Their moulding is made of baguettes, separated by horizontal stripes.

A contrasting marble string course with triglyphs and five pointed stars projected around the stairwell at the landing. Winslow designed a custom railing with cast iron balusters that incorporated the five pointed federal star within a circle he used in the carved moulding.

It went on to buy Continental Plastics Europe, with 12 sites across Europe, in 1997 and Wiko, an injection moulding business based in Germany, in July 2000. In December 2010 it bought Superfos Industries, its former parent, for about €240 million (£203 million).

Where the arcade meets the facade, it forms a "narthex" or wide portico of five arches, stretching across the front of the church. The arcade has a decorative cornice and circular moulding on the spandrels echoes the occular window in the facade.

The Associated Metalworkers' Union was a trade union in the United Kingdom which existed between 1863 and 1999. It represented semi-skilled foundry workers known as iron dressers or fettlers, who were responsible for removing moulding sand and excess metal from castings.

The MORCEE has a self-bailing cockpit with the cockpit an integral part of the deck. The cuddy cabin is enclosed with a hatch slide arrangement. The liner in the cabin is a separate moulding and contains two berth cushions and a sink.

The base is cushioned, with cable moulding. There are brasses to previous vicars, and several memorial slabs. In an arch in the wall of the south aisle, there is an effigy of Sir John Sewell, knt. The register dates from the year 1538.

There are three buttresses on the south wall and two on the north wall. All the windows are round-headed with roll-moulding, those in the chancel being narrower than elsewhere. The west window is flanked by colonnettes. The roof is barrel vaulted.

Supporting vertical brackets and gable like moulding infill enforces the oblique line of the parapets central gable. The northern elevation of the 1881 hall is not ornate and appears to have two windows and a door near where it adjoins the 1891 section.

Cockle bread was an inferior type of British corn or wheat bread mixed with "cockle weed". In the 17th century a practice known as "moulding" cockle-bread had a sexual connotation. Cockle bread is also mentioned in a 19th-century nursery rhyme.

In 1995, Arroyo attended a political rally in AMA when she ran for re-election as senator. Arroyo attended all graduation rites for AMA from 2002 to 2005.GMA lauds AMA education system's role in moulding 'Filipinos of the future' . (Press release).

In the 14th century, the Venetians introduced marzipan, a confection made from almonds, sugar and rose water, to central Europe. Marzipan was an ideal material for moulding magnificent pictures from, which were artistically painted with plant colouring and often decorated with gold leaf.

Ogee clock, framed with ogee moulding. Ogee is also a mathematical term, meaning an inflection point. In fluid mechanics, the term is used to refer to aerodynamic profiles that bear such shapes, e.g., as in the ogee profile of the Concorde supersonic aircraft.

A monastery was founded at Balla by Mo Chua of Balla (d. AD 637). The tower is believed to date from the 12th century, judging by the moulding on the lower jambs. The tower was used as a bell-tower in the 19th century.

The porch was added in about 1500. The Holy Water stoup on the east wall is of the same date. The semi-circular Norman archway decorated with triple moulding leads into the church. There are traces of scarlet paint on the archway and capitals.

The name "Ecphora" is Greek, meaning "bearing out." The word was originally used by Vitruvius to signify the projecture of a member or moulding of a column, and here refers to the distinctive "T-shaped" ribs that project from the shell.Oxford English Dictionary, "Ecphora" entry.

In preparing the candy the sugar is first heated until it becomes brown then the grated coconut, which has been dried, and then the lemon is added to flavor it. Pour it on a flat surface and start moulding it into small round crunchy candies.

Replacement uPVC windows and stone sills throughout. Replacement uPVC door with side and overlights in segmental-headed opening with hood moulding. Outbuildings to rear reached through decorative ironwork double gates with vegetal motifs. Setback from road behind recent rendered boundary wall with wrought-iron gates.

Bangladesh Islami Chhatrashibir was established on 6 February 1977 at the Dhaka University central mosque. Their stated mission is "to seek the pleasure of Allah (SWT) by moulding entire human life in accordance with the code, bestowed by Allah (SWT) and exemplified by His Messenger".

Remmel Flats is located at 1700-02 South Spring Street. It is a sophisticated variant of an American Foursquare, with Colonial Revival massing and detailing on its two porches. Dormers projecting from the hip roof have deep pedimented gables with dentil moulding and modillions.

The two-storied structure is rectangular in shape. The portico has four Ionic columns with fluted stems and cabbage leaf capitals. The front gables of the building have Renaissance style plaster moulding. The lower part of the exterior walls are made of plastered brick.

Methods of forming stoneware bodies include moulding, slipcasting and wheel throwing.What is Stoneware Underglaze and overglaze decoration of many types can be used. Much tableware in stoneware is white-glazed and decorated, and it is then visually highly similar to porcelain or faience earthenware.

The Daysailer interior liner is a one piece moulding. It is not integral with the deck. No self-bailing is provided in this model. It is recommended that a boom-tent be used to reduce the amount of rain water getting into the boat.

Designed by John William Livock, the new station was constructed in a doric style with cornice moulding and pediment. A new road named "Station Road" was laid from Chandos Road to connect with Gawcott Road to allow passengers to reach the new booking office.

The house has pilastered corners and mitered window moulding strips, and a porch sheltering the front entry that is Colonial Revival in styling. It is currently painted pink with white trim. The house was listed on the National Register of Historic Places in 1986.

However, after becoming king, Richard began moulding his nephew, John de la Pole, 1st Earl of Lincoln, to manage the north, passing over Northumberland for the position. According to Carpenter, although the earl was amply compensated, he despaired of any possibility of advancement under Richard.

The church has two centred arches with three orders of moulding. The ceiling is groin-vaulted with carved bosses. The church organ is on the west end. There is a wall monument to the church's founder John Blayds who died the year ground broke.

There are angle turrets with conical caps on the top storey. Variations of cable moulding in diminishing courses terminating as foliated stop decorate the corbelling. At the foot of the circular wing, in the re-entrant angle, is the entrance. There is a vaulted basement.

In 2003 the old Moulding Methodist church on the Elbut Lane site was demolished and a chapel put there in its place and renamed Jericho Methodist church. During the rebuilding of the church the services were held at a pub called The Pack Horse Inn.

Chapman lived in the house until his death. During his lengthy ownership, Chapman completed numerous Greek Revival and Victorian-era upgrades, including new moulding, chair rails, wooden mantels, door frames, and a black and gold Port D'Oro (also called Portor or Portoro) Italian marble mantel.

Suddenly, hornets fill the room and begin to attack Takano, eventually paralysing and killing him with their venom. Once Takano is dead, they begin ripping flesh from his body and moulding it to the hive, intending to rebuild the boy's body and revive him.

The Amos Stearns House is a historic house in Waltham, Massachusetts. Built c. 1845, this -story wood-frame former farmhouse is a reminder of Trapelo Road's agricultural past. It has well-kept Greek Revival styling, including corner pilasters and an entablature with dentil moulding.

That of the first pier is plain; that of the second is prepared for carving but not carved, and that of the third has lines preparatory to carving and some carved roundels. Where the moulding of the two central arches meet are two fantastic heads.

Arburg headquarters in Lossburg, Germany Arburg Injection Moulding Machines Arburg freeformer Arburg GmbH + Co KG (referred to as ARBURG) is a German machine manufacturing company. It is owned by the Hehl and Keinath families and, with its electric, hybrid and hydraulic plastic injection moulding machines, turnkey systems and its industrial additive manufacturing system, is among the industry leaders worldwide. With approximately 2,500 employees in Germany and a further 500 worldwide, Arburg serves sales markets for machines with clamping forces ranging from 125 to 6,500 kN. The machines are used for plastic part production in industries such as automotive, communications and consumer electronics, medical technology, domestic appliances and packaging.

In mitred sticking, the profile (known as the sticking) is applied to the edges of both the rail and stile and then a section of the sticking at the ends of each stile is removed leaving a mitred edge which aligns to a similar mitre cut on the ends of the sticking on each rail. This traditional method is more time consuming to complete, hence the popularity of cope and stick for manufactured items. When applied moulding is to be used, the moulding is applied to the inside edge of the outer face of the frame after the frame and panel have been assembled.

Great Aspirations is the debut record by English duo TC&I; (bassist Colin Moulding and drummer Terry Chambers, both formerly of the band XTC). The EP was released on 7 October 2017. The record marked the first recordings by Chambers since 1984 when after leaving XTC, he relocated to Australia and joined the band Dragon, touring with them 1983 to 1984 and recording an album. With the exception of guest appearances as a session vocalist, bass player, and collaborator on several albums, the EP also marks the return to recording by Moulding in his own right (his first new recordings since XTC's disbandment in 2006).

Panorama Antennas Ltd. was founded in 1947, under the name of J.F.J. Products, by a group of ex-servicemem, including Leon Jesman. J.F.J. was a light engineering company that manufactured a diverse range of products from mop heads to Perspex cake stands to the kind of dolls’ eyes that close when the toy is laid flat. In 1949, to improve the quality and reduce the cost of the company’s dolls’ eyes, which were initially machined out of plastic blocks, Jesman designed and built a plastic insert injection moulding machine from surplus aeroplane parts, thereby becoming one of the pioneeres of practical insert injection moulding.

The woven and continuous fiber styles are typically available in a variety of forms, being pre- impregnated with the given matrix (resin), dry, uni-directional tapes of various widths, plain weave, harness satins, braided, and stitched. The short and long fibres are typically employed in compression moulding and sheet moulding operations. These come in the form of flakes, chips, and random mate (which can also be made from a continuous fibre laid in random fashion until the desired thickness of the ply / laminate is achieved). Common fibres used for reinforcement include glass fibres, carbon fibres, cellulose (wood/paper fibre and straw) and high strength polymers for example aramid.

"Ogee clocks" were a common type of weight-driven 19th-century pendulum clock presented in a simplified Gothic style, with the original design attributed to Chauncey Jerome. Ogee clocks were typically made in the United States, as mantelpieces or to mount to a wall bracket, and are one of the most commonly encountered varieties of American antique clocks. The overall design was rectangular, with framing by moulding with an ogee-profile surrounding a central glass door with a painted scene below the clock face, a door that protected the clock face and pendulum. Weights supported by pulleys fell inside the ogee moulding and so were hidden from view.

The Maria Bassett House stands on a hillside overlooking the Lower Mystic Lake, at the southeast corner of College Avenue and Stowecroft Road and a short way above United States Route 3, from which it is separated by an intervening house. It is a 2-1/2 story wood frame structure, with its front facade oriented to face roughly east, toward the lake. Its Italianate features include a hip roof with extended eaves, paired brackets and dentil moulding in the eaves, and corner boards scored to resemble quoins. The porch, which wraps around two sides, is also elaborately decorated, with brackets, dentil moulding, paired columns, and turned balusters.

Four columnar pilasters surmounted by capitals and moulding give a vertical dimension to the appearance and support the upper cornice with its grand central arch. The upper part of the facade consists of a succession of levels of rectangular blocks of decreasing size, linked to curved volutes at the base of the first and second levels and with volutes in the remaining, upper levels separated by variegated moulding. On the contraforti of the first two levels there are, respectively, vases and truncated pyramidal obelisks. Inside the pediment of the first level (which is framed by pilasters) is the crowned coat of arms with the motto DIVO BARTOLOMEO DICATUM.

The main entrance, in the Gothic style, dates from the late 18th century. Stone steps lead to the door, which is headed by an ogee-arched moulding, with paired quatrefoil decorations above surmounted by a cornice. Nikolaus Pevsner describes the entrance as "pretty".Pevsner & Hubbard, p.

Since 1977, his association with Rajinikanth proved to be extremely successful, as they went on work together in 25 films. Muthuraman was mainly responsible for moulding Rajini's career and turning him into a commercial star. He was also the associate producer of the Rajinikanth starrer Sivaji.

Page, Hilary Fisher. Playtime in the First Five Years. Second edition. London: Allen & Unwin, 1953. In 1936, he began manufacturing Kiddicraft ‘Sensible’ toys using new injection moulding technology and in 1937 these were sold under the Bri-Plax brand forming a new company, British Plastic Toys Ltd.

This method of construction is usual in large complicated forms. The joints of necks and bodies of jugs and jars were often masked with a roll-moulding. Simpler and smaller forms were also cast. The finest specimens of such vases come from houses and tombs at Knossos.

The ceilings slope lower, forcing her to crawl. She eventually escapes by knocking holes through the moulding walls. Kay finds Edna, much to her horror, picking at her rotting face with a knife. Kay and Sam flee into the passageway (hearing the now crazed Edna approaching).

Deformed shapes were not at all uncommon. These shapes were achieved through the implementation of moulding as a technique, as opposed to working on a potter’s wheel. Sometimes, bowls were so deformed that they became difficult to use – whisking tea could even become a difficult task.

Oyster have moved from being a marketing company which it was for the majority of its history, to taking assembly in-house in 2000s and in 2019 it took the final step in this process taking hull moulding in-house in a partnership with Lloyds Register.

The Union building at 65–73 Union Street was built in 1896. Georgian Revival in style, it has seven bays with storefronts on the ground level, and an entranceway recessed behind an arch flanked by brick pilasters. It also has a modillioned cornice, with dentil moulding.

Above the windows is a cornice formed by the repeated arch moulding. In 1971, a freestanding crucifix was erected on the southern side of the church commemorating Eric Johnstone. Also apparent on the southern elevation is the semi-basement housing the coumbarium under the southern transept.

The roofline is embellished with numerous merlons. The top of the mosque's white marble façade is capped by cavettos, or concave moulding. 5 arched portals offer entry into the main prayer hall. The central arch is the tallest, and features cusped arches typical of the Mughal style.

Blakeway was declared bankrupt in 1759, his shares passing to Mary Lee who married John Wilkinson in 1763. This gave the Wilkinsons control of Bersham and the business flourished. Isaac patented a novel moulding process in 1758. Isaac's personal subcontract business was a source of continued tensions.

CrN is used as a coating material for corrosion resistance and in metal forming and plastic moulding applications. CrN is often used on medical implants and tools. CrN is also a valuable component in advanced multicomponent coating systems, such as CrAlN, for hard, wear-resistant applications on cutting tools.

The Incubation Centre functions as a placement cell. It is manned by professionals to impart professional training. A program abbreviated TESKIMO (Technical Skills Moulding) is designed during every summer and winter vacation to impart this training. Additional programs to assist students secure internships and in-plant-training are conducted.

Kristiansen's company expanded throughout the 1940s and 1950s. In 1947, he purchased a self-moulding machine and began production of plastic toys. His son Godtfred became managing director and later CEO. All of Ole's sons assisted in his company, and in 1958 the LEGO Brick patent was created.

The whole building got new roof frames. Weathered blocks in the exterior were replaced and the church was plastered. Principal moulding was made in pseudogothic style. Mocker revealed the original gothic wall painting and probably also the original polychromium plated of the arch groins and girders in the interior.

The panels of the walls are treated like picture frames, with inner and outer mouldings, in contrast to the window frames and the wall mirrors which are surrounded by "clusters of reeds, with an inset behind which a curtain could hang without obscuring the moulding", according to Binney.

Edna Dean Proctor (September 18, 1829 – December 18, 1923) was an American author. Though she occasionally wrote short sketches and stories, poetry was her field. Proctor was characterized as a master of pathos. Her early environment left a vivid impression and was a moulding force in her writing.

The antiretroviral is also owned by IPM. The device is a one-size that fits all. It has a whitish, opaque colour with an outer diameter of 56 mm and a cross- sectional diameter of 7.7 mm. Injection moulding of silicone elastomers forms the shape of the ring.

It differed from its predecessor mainly by having a wider choice of engines, along with a new nose moulding giving it a more bulbous look and a grille to cool the new front- mounted radiator, and a revised rear end with new lights and a different engine door.

The next major addition to the house was the north wing ("C" on plan). Its turret, oriels and external sculpted moulding make it almost a miniature country house in itself. This wing has remained largely unchanged since it was built about 1520.Nicholas Cooper dates this wing to 1534.

A recess, in which sits a large rendered statue, is located in the upper section of the facade. The statue and recess are surrounded by rendered high relief moulding. Below the statue are the words "NAZARETH HOUSE". The parapet is surmounted by a rendered Celtic cross and rendered pedestal.

Round tower The round tower is about tall, depending on which ground level it is measured from. The arched sandstone doorway is above ground level and is framed by moulding. The bell- storey has four lintelled windows facing the cardinal directions. The cap is gone but battlements remain.

Most installations are surface mounted. For safety, magnetic lock, cables, and wires should be routed through the door frame or flush mount with wire moulding. Installation is straightforward. With in-swinging applications, the electromagnet is typically installed in the opening corner of the door at the door's header.

The Xbloc consists of non-reinforced concrete, similar to other single layer armour units. Ordinary concrete C25/30 is normally appropriate for the production of Xbloc armour units. However, often concrete of higher strength is applied for other reasons, e.g. early strength for faster de-moulding, ice loads, etc.

Due to structural deterioration, many of the balconies had to be rebuilt completely. The balconies' many features, including clamshell base, curved profile and plaster features, required many different processes to recreate the original. Both latex moulding and traditional construction techniques were used to make sure the balconies remained durable.

Polymerization with matched-die moulding is used for plane or simple-geometry laminates and can include a vacuum pump and an electric or hydraulic heat source. It is made of a press with male and female moulds that close to form a gap with the shape of the component, the width of which is regulated to control the thickness of the part. The press can not apply a hydrostatic pressure as the autoclave, but only a vertical one. Matched-die moulding allows to have a very high dimensional control, a good surface finish on both surfaces, and reasonable production rates but, in return, it can have fibres misalignment and it is very expensive.

Three-piece (or "open- throat") boots were first developed by Mel Dalebout (around 1969), who introduced a rigid magnesium boot shell in that year (Brixia did the same thing with their aluminum shell at around the same time). The big advantage was that the main shell was a single piece that was convex at all points, meaning it could be easily produced using a plug mould. Conventional boots with overlapping flaps required more complex moulding processes. Engineers at Henke, Heierling, Sanmarco and Caber saw the advantage for high-speed moulding, and plastic three-piece boots were on the market by 1972, when Roland Collombin won the Olympic downhill in the Henke Strato.

Most polymers, sometimes referred to as resins, may be used, including all thermoplastics, some thermosets, and some elastomers. Since 1995, the total number of available materials for injection moulding has increased at a rate of 750 per year; there were approximately 18,000 materials available when that trend began. Available materials include alloys or blends of previously developed materials, so product designers can choose the material with the best set of properties from a vast selection. Major criteria for selection of a material are the strength and function required for the final part, as well as the cost, but also each material has different parameters for moulding that must be taken into account.

Sir Richard Weston, (representative image, not portrait) drawn by Sir Thomas Wriothesley in 1509, attending deathbed of King Henry VII. (Detail from: British Library Additional MS 45131, folio 54) Ermine, on a chief azure five bezants Shapwick, Dorset, with a crescent for difference of a second son Monogram of Sir Richard Weston, 1520s terracotta moulding, Sutton Place Rebus of Weston, a "waisted-tun", a barrel with concave ends. 1520s terracotta moulding, Sutton Place Sir Richard Weston (1465–1541), KB, of Sutton Place in the parish of Guildford in Surrey, was a courtier and diplomat who served as Governor of Guernsey, Treasurer of Calais and Under-Treasurer of the Exchequer during the reign of King Henry VIII.

He was frustrated that his suggestions to Fox were almost always deferred to "the songwriter", which meant either Partridge or Moulding. Both Gregory and Moulding characterised Fox as subservient to Partridge's studio indulgences, which they termed "Andy- ness", and felt that it had a negative effect on the album's sound. Guests who visited the sessions included Elvis Costello, who was next door recording his album Spike (1989), KROQ disc jockey Rodney Bingenheimer, Chris Squire of Yes, David Byrne of Talking Heads and actor River Phoenix. Partridge has said that Phoenix was an "utter and anal" fan of the band, and urged him to phone a friend who was "also a big fan", Keanu Reeves.

Deutsche Standards Editionen, Köln 2010, . The company manufactures stretch blow-moulding machines for producing polyethylene terephthalate (PET) bottles, plus fillers, labellers, bottle washers, pasteurisers, inspectors, packers and palletisers. This product portfolio is complemented by material flow systems and process technology for producing beverages for breweries, dairies and soft-drink companies.

At the south end of the church is a tower flanked by wings. The tower is in four stages, the bottom stage being in three storeys. The lowest of these storeys contains a round-headed doorway with three orders of moulding. Both of the upper storeys contain a three-light window.

Management of Success: The Moulding of Modern Singapore. Singapore: Institute of Southeast Asian Studies, 1989. pp. 144-145 SGLU was reconstituted as SFTU in August 1946, as the Malayan General Labour Union was divided into the SFTU and the Pan-Malayan Federation of Trade Unions.Political Development of Singapore, 1945-1955, p.

Its lower windows are topped by crown moulding, while its upper windows butt up to the roof cornice. The building was enlarged twice in the later years of the 19th century, but retained its Georgian style. The house was listed on the National Register of Historic Places on September 4, 1986.

These pillars are reinforced by sandstones blocks and strapped in lower third with shaped moulding. On the tops of rests there is a combination of the counter and saddle shelters. Corner load-bearing pillars are built diagonally. Great windows of the nave provide great illumination of space of the church.

A variety of materials can be used for both the molding and casting stages of the lifecasting process. For moulding, alginate, and plaster bandages are the most popular materials. Different alginate formulas are available with different setting times and working properties. Choosing the correct formula can make the job much easier.

Burdwan was one of the premier districts in India in value of minerals. The Raniganj coalfield was the birthplace of the Indian coal industry. Besides coal, important minerals found in the district are iron ores, calcium carbonate, abrasives, silica bricks and moulding sands, glass sands, building materials, manganese, bauxite, laterite etc.

The mansion's roof is covered by gray slate and is further embellished with three dormer windows facing from the home's front façade. The roof is topped by a balustraded deck. Similar moulding contours were used at varying scales throughout the mansion's exterior construction. The mansion's cornice is composed of ornamented moldings.

A traditional cabinetmakers shop might have many, perhaps hundreds, of moulding planes for the full range of work to be performed. The late nineteenth century brought modern types which were all-metal affairs such as the American Stanley No. 55 Universal PlaneBernard E. Jones, edit.:"The Complete Woodworker". page 243.

"Ball and Chain" is a song written by Colin Moulding of XTC for their 1982 album English Settlement. It was issued as the second single from the album on 26 February 1982, following the success of the band's biggest hit "Senses Working Overtime". The single reached No. 58 in the charts.

The rear leanto appears to be an integral part of the house's original construction. The main facade is three bays wide, with sash windows placed symmetrically around a wide center entrance. A single-story ell extends to the left side. The interior retains many original finishes, including carved moulding and paneling.

Chen Hsong is the only plastic injection moulding machine manufacturer of its kind that serves customers 24 hours a day, 365 days a year in after sales and maintenance service in China. Chen Hsong does development, manufacture and sales of injection molding machines, mold machining systems, auto-molding systems, etc.

The Robinson-Lewis-G. F. Fessenden House is a historic house in Arlington, Massachusetts. The 2-1/2 story wood frame house was built c. 1850, and is a well-preserved Italianate style house, with ornate bracketed window surrounds, and a gable-roofed front porch with dentil moulding and full pediment.

The Dumbarton Oaks birthing figureThe squatting position gives a greater increase of pressure in the pelvic cavity with minimal muscular effort. The birth canal will open 20 to 30% more in a squat than in any other position. It is recommended for the second stage of childbirth.Russell JG. Moulding of the pelvic outlet.

A tapered or scarfed finger joint is the most common joint used to form long pieces of lumber from solid boards; the result is finger-jointed lumber. The finger joint can also be valuable when creating baseboards, moulding or trim, and can be used in such things as floor boards, and door construction.

Inserts, usually metallic, can also be molded with the plastic. As a side note, remember not to allow any undercuts on the shape, it will make ejection especially difficult. Thermoplastic matrices with an inherent indefinite shelf-life and shorter cycle moulding times are widely used and examples are shown in Ref 3.

Grover Ramstack (June 3, 1886 - August 12, 1948) was an American politician and laborer. Born in Milwaukee, Wisconsin, Ramstack worked in the Milwaukee city water department and later worked in the moulding business. He was also a railroad clerk. In 1933, Ramstack served in the Wisconsin State Assembly and was a Democrat.

The chapel contains a piscina (basin), which has a cusped head. On the wall there is an inscription in Latin warning of "idle chatter in church". The chancel measures by . The pointed chancel arch separating the chancel from the nave is in the Decorated style; it has two orders with wave moulding.

Modern encaustic tiles use a two-shot moulding process. The 'inlay' colour is moulded first. For multiple colours, a mould with cavities for each colour is used and the individual colours are filled carefully. This coloured clay is then placed face-down in a mould that is backfilled with the body colour.

Windows are framed by delicate Federal period moulding. Brick chimneys are set on either side of the roof. The interior includes Federal-style cornices, and a fine carved arch in the central hall. Although many rooms retain original Federal period styling, some were altered by subsequent owners to have simpler Greek Revival elements.

Of the Molyneux family, Sir Richard (d.1290) and Sir William Molyneux (d.1320), knights of the Crusades, are entombed within the church, and are its oldest inhabitants. Their effigies now lie beneath an arch moulding set into the wall in the Molyneux chapel, which is outside of the 14th-century church walls.

The treatment involves injecting stabilised hyaluronic acid into the breast, buttock or other areas, and then moulding to the desired shape. The procedures requires a local anaesthetic, and will likely cause bruising, swelling and discomfort for a few days. The effect only lasts for 12 months, after which further injections are required.

"PITS Black & White" is the name of the intercollegiate National Techno-Cultural Fest that is conducted every year by the Tech Brigade. The Digital Network Infrastructure with LAN/WAN campus-wide Routers for both Wired Terminals and WiFi have been designed and maintained by the students through the Incubation and Tech. Moulding Centre.

Choir stalls are of the 15th century, as are many of the pew bench ends. The pulpit and lectern are also of the 19th century. There is a canopied stoup, and a 12th-century lead-lined tulip bowl font on a stem with rope moulding. The church has five bells cast in ca.

Papier-mâché is the French word for "chewed paper", which is a standard English loan word, for objects made by moulding paper pulp in various shapes. Then decorating them with designs in various colours. In the figurative sense the word 'papier- mâché' has come to be identified as the art of Kashmir.

It has a gabled roof over curved wind braces. Its walls are weatherboarded, and its bargeboard is decorated with moulding. The doorway is Norman and consists of a single order with a tympanum. In the west wall is a large square-headed 19th- century window over which is a small 12th-century opening.

BT network engineer Clive Salmon established access to the Internet for the project leader, Richard Moulding of BT, in July 1991. The BBC registered with the DDN-NIC in 1989, establishing Internet access via Brunel University. In 1991, bbc.co.uk was registered through JANET NRS and the BBC's first website went online in 1994.

Entries occur at the base of these bays, the major public entry on the right. Plain giant order pilasters occur to either side of the fourth and fifth floor windows of these bays. Cable moulding is a decorative feature of the facade around each entry. The windows are all steel framed casements.

Changes include revised bumpers, there is a chrome moulding above the number plate on the boot lid, refreshed alloy wheel designs and the Holden IQ system. Also the SSV model was introduced. The Holden Ute was sold as the Lumina Ute in South Africa which had the same equipment as the sedan.

The front moulding is completely covered with a cushion of energy absorbing material to present safer surfaces in the event of collision with a pedestrian, and thus minimise injury. The headlights are mounted high to increase the deformable area presented during collision with a pedestrian."Pininfarina Nido Concept (2004)". Car Body Design.

The House at 173-175 Ward Street in Newton, Massachusetts, is one of the city's few Federal style houses. Built c. 1800, it is a 2-1/2 story wood frame structure with clapboard siding, and twin rear wall chimneys. The house has a five bay facade with windows framed by narrow moulding.

The church is Hiberno-Romanesque and simple in design. The west doorway has simple bead moulding, as do the four corners of the gables. The door in the south may have led to the sacristy. High in the northwest corner is a corbel called the "clock-stone", perhaps the gnomon of a sundial.

Tex Holdings plc is a United Kingdom-based manufacturer and supplier of engineering products, piling equipment, plastic injection moulding, and boards and panels. The company is listed on the FTSE Fledgling Index of the London Stock Exchange under the ticker TXH in the industrial engineering sector.TEX HOLDINGS PLC ORD 10P. London Stock Exchange.

The interior of the church is lined with red Rainhill sandstone. The five-bay arcades are carried alternately on round and octagonal columns. The chancel arch is high, and has two orders of moulding. There are carved wooden screens between the nave and the chancel, and between the chancel and the north transept.

Short lengths of the original prison wall extend from each wing. The main gate is located in the centre of a recessed bay between the two outer wings of the building. The steel gate is surmounted by large fanlight with wrought iron infill. The gate and fanlight are surrounded by cream brick moulding.

43 To further accent building geometry, narrow strips of moulding were used to highlight features such as storeys and windows.Raine, p. 44 Garden walls replaced fences that had been erected to keep out animals. These walls were initially low and augmented by fairly tall stone posts, between which picket fencing was installed.

For instance, the forestay is bolted right through the hull and secured with a bolt hidden at the centre of a bronze casting of a thistle which becomes a feature of the bow. The shrouds and backstay are secured to u-bolts through the deck, eliminating the need for rigging screws. The u-bolts provide a compression packing that can be screwed down tight, and owners report that they seldom leak. The deck is moulded with a lip that turns up to fit inside the hull moulding, and after being glued and glassed in, the join is covered with a custom-designed vinyl moulding that eliminates the common problem of deck/hull leaks, and also serves as a practical rubbing strake.

Cavetto moulding cornices, all of them having cavettos A cavetto is a concave moulding with a regular curved profile that is part of a circle, widely used in architecture as well as furniture, picture frames, metalwork and other decorative arts. In describing vessels and similar shapes in pottery, metalwork and related fields, "cavetto" may be used of a variety of concave curves running round objects. The word comes from Italian, as a diminutive of cave, from the Latin for "hollow" (it is the same root as cave).OED, "Cavetto" A vernacular alternative is "cove", most often used where interior walls curve at the top to make a transition to the roof, or for "upside down" cavettos at the bases of elements.

A building's surface detailing, inside and outside, often includes decorative moulding, and these often contain ogee-shaped profiles—consisting (from low to high) of a concave arc flowing into a convex arc, with vertical ends; if the lower curve is convex and higher one concave, this is known as a Roman ogee, although frequently the terms are used as if they are interchangeable and for a variety of other shapes. Alternative names for such a true Roman ogee moulding include cyma reversa and talon. An unorthodox ogee arch in Kilfane Church, Ireland (13th century) The ogee curve is an analogue of a "cyma curve", the difference being that a cyma, or "cyma recta", has horizontal rather than vertical ends. The cyma reversa form occurs in antiquity.

Trachelium (from the for "neck") is the term in architecture given to the neck of the capital of the Doric and Ionic orders. In the Greek Doric capital it is the space between the annulets of the echinus and the grooves, which marked the junction of the shaft and capital. In some early examples, as in the basilica and temple of Ceres at Paestum and the temple at Metapontum, it forms a sunk concave moulding, which by the French is called the gorge. In the Roman Doric and the Ionic orders the term is given by modern writers to the interval between the lowest moulding of the capital and the top of the astragal and annulet, which were termed the hypotrachelium.

In order to resolve this issue and calm dissatisfied customers, the company invested RM 200,000 in a plastic bottle moulding machine that creates indents of the Three Legs Brand logo on the neck of every bottle. This enabled their customers to differentiate the TCM-certified Three Legs Cooling Water from the imitations on the market.

All rooms, with the exception of room 1 have 150mm wide tongue and groove beaded ceiling timbers fixed directly to the underside of the joists. They are dated to about 1860/70. The timbers used in Room 1 are wider, approx. 200-250mm wide and are tongue and groove without any moulding at the joint.

The theatre has a building area of and is sited near the junction of the Independence Avenue and Liberia Road. The building has a complicated construction moulding and novel exterior features. When looked at from a distance, the whole structure looks like a gigantic ship or a seagull spreading its wings.National Theatre of Ghana. accracitysearch.com.

The Child is unclothed save for a white linen cloth, foreshadowing the shroud in which his body was later placed following the Deposition.Birkmeyer, p. 329 The niche around the central couple contains a number of biblical figures in grisaille. God the Father is shown at the centre top, just above the niche's concave moulding.

The process is executed on a specialized moulding machine, which precisely controls the temperature, travel, and force during the process. The tools used must withstand high temperatures and pressures, and need to be resistant to chemical interaction with the glass. The mold materials also have to be suitable for machining into the precise surface profiles.

Plastics News (North America) — Plastics News, the Plastics Encounter trade show, the PN Executive Forum and other North American conferences. Plastics News Global Group (Croydon, England) — Plastics & Rubber Weekly, Plastics News Europe, the Plastics Design & Moulding show, the U.K. Plastics Industry Awards and various European conferences. Plastics News Global Group (Asia) — Plastics News China.

The ground floor of Palazzo Santa Sofia was built in the 13th century, and the date 1233 is inscribed on the moulding of one of its windows. The upper floor was built sometime after 1938. The building was periodically rented and used as a school run by Roman Catholic nuns.Cuschieri, Doreen (25 October 2010).

Sitting on a white stepped base, and attached to a white back plate which runs to the entablature, is a pedestal. The pedestal's central panel contains inscriptions within a white bolection mould. Set back on either side are inset white oblong raised panels—the top has a projected moulding following the plinth's horizontal facets.

A number of tombs in the graveyard are listed buildings in their own right. The Boghurst tomb is a chest tomb of 1750 close to the south door. The listing draws attention to its inscriptions, the urn balusters and notes that it is railed. The Moulding tomb is another chest tomb, this time of 1789.

Inside the church three of the piers of the arcades contain trefoil-headed niches. In the north aisle are some box pews dating from the 17th and early 18th centuries. The baptistry contains a font dating from the 11th century. This is decorated with zigzag moulding, and is set on a 19th-century base.

Manufacturers go to great lengths to protect custom moulds due to their high average costs. The perfect temperature and humidity level is maintained to ensure the longest possible lifespan for each custom mould. Custom moulds, such as those used for rubber injection moulding, are stored in temperature and humidity controlled environments to prevent warping.

Candle making was developed independently in many places throughout history. Candle moulding machine in Indonesia circa 1920 Candles were made by the Romans beginning about 500 BCE. These were true dipped candles and made from tallow. Evidence for candles made from whale fat in China dates back to the Qin Dynasty (221–206 BCE).

All windows are recessed into the wall. The architects employed geometric shapes to enhance this hall. The base has a strong horizontal emphasis that is reinforced by the horizontal window moulding and entablature beneath the parapet. Roundness is emphasised by the semi-circle window heads and mouldings and the circular decorations in the parapet.

Manufacturing, primarily in Stratford and Listowel, Ontario is also significant. Categories include auto parts, metal fabrication, plastic injection moulding, robotics, and building and construction as well as plastics and textile manufacturing. Stratford has been attracting an increasing number of high-tech companies. The largest employers in Perth County include Maple Leaf Foods, Listowel Technology Inc.

Breton S.P.A., a privately held company of Treviso, Italy, that developed large-scale Breton method in 1960s, is the dominant supplier of equipment for making engineered stone. Although Breton was the original manufacturer of moulding equipment and still holds multiple international patents on the process, there are now several other companies producing similar machinery.

All ceilings are wood except the room with faux marble walls which has a plaster ceiling. The second floor has extensive moulding around all windows and doors. All architectural details except the rear addition are original. Of major interest are the pediments over the front façade windows and side lights on the second story.

By that time, he could learn Arabic, Persian and Urdu and Hadith, Fiqh, Tafseer. His father Ghousi Shah played a great role in moulding his child's intellectual purity and instigated in love for Tasawwuf. He was Aashiqe Rasool – a great lover of Islamic prophet Mohammed. Besides, he was a great lover of God too.

Taking the parish of Frindsbury as a referenced example: about of acidic topsoil covers about of head, which lies on the alkaline Thanet Sands. There are five layers of sands with different properties- the light grey sands are themselves marketable and are used in the brickmaking process, and as moulding sand for metal foundries.

The tube may be printed upon, and cut at equal intervals. The pieces may be rolled for storage or packed together. Shapes that can result from extrusion include T-sections, U-sections, square sections, I-sections, L-sections and circular sections. One of the most famous products of extrusion moulding is the optical fiber cable.

Each of these features is crowned by a hooded moulding. To the left of the main facade is a square tower, also finished in wooden clapboards, and with similarly decorated windows. Clocks are set on two of the tower faces in diamond-shaped surrounds. Above these is the belfry, with Gothic gabled louvers above.

The egg advances to come in contact with the seminal fluid. Then it passes along the common duct that receives a granular yellowish fluid that ends up surrounding the egg. The egg then passes into the ootype. By a vermicular moulding process, the yolk is arranged around the egg which begins take its form.

A couple of Partridge's rejected Skylarking songs were offered for Oranges & Lemons, but were again rejected. He said: "Maybe it was fate that they wouldn't rise up. They are probably too weak and best left to die." "The Good Things", a Pet Sounds-influenced Moulding song demoed for Oranges & Lemons, was passed for inclusion.

In August 2010, the injection moulding division 'FOBOHA' was sold to the Barnes Group. In March 2014, the Adval Tech Group consolidated all of its global mold construction activities under the brand Adval Tech Foboha. Barnes Group Inc. has entered into a definitive agreement to acquire Adval Tech's molds business (FOBOHA) in July 2016.

The clock sits above the pedestal. There is a clock face on all four faces which are illuminated at night. Each face is surrounded by a laurel wreath and foliated carving is located in the bottom corners. A hood mould over each face creates a domed surface on which sits a large cable moulding.

The middle and top storeys contain six two-light mullioned and transomed windows in pairs. The gable is stepped and contains a row of six windows, over which are two more windows. Between these is the date 1884 in brick moulding. In the apex of the gable is the cartouche of the police force.

At the same time the height of the opening was lowered. This was constructed in lightweight materials. Some form of applied panelling would alleviate the "plain-ness" and better fit in with the general theme of the interior. The walls are rough-cast plaster with classical "egg and dart" on an ovolo cornice moulding.

Post-Williams House is a historic home located at Poughkeepsie, Dutchess County, New York. It was built about 1877 and is a -story, three-bay-wide, Late Victorian-style dwelling. It features a pitched roof and a -story tower with zig-zag moulding. It was added to the National Register of Historic Places in 1982.

This includes "some good Douglas woodwork", it is "largely unaltered and retains high-quality original fittings in polished oak". These fittings include an inner entrance screen, panelling, doors and architraves, fireplaces, a fitted sideboard, and a balustraded gallery. The plaster ceilings are decorated with moulding and compartments, and in the stairhall is a limestone fireplace.

The Electric Coliseum Cinema was built in 1912 on the corner of Green Lanes and St Ann's Road. It opened early in 1913. In addition to seating for 650 in stalls and a small circle, there was a small stage for variety acts. The auditorium was richly decorated with gilded bas-relief plaster moulding.

The old vicarage is now a Grade II listed building. Originally built in the early 17th century, it was comprehensively redesigned and rebuilt between October 1780 and September 1781. Alterations were made in the 19th century. The stuccoed façade has five bays, each with an evenly spaced sash window topped by an architrave with decorative moulding.

Likhit's analysis shows how Sarit combined paternalistic rule from the Sukothai (phokhun) with Ayuthaya's despotic power to create his personal political style. According to Thak, Luang Wichit Wathakan was essential in moulding the leadership principles of Phibun and Sarit. From him, Sarit was introduced to the idea of pattiwat (revolution) and the guiding leadership principle of phokhun.

He was mentioned as the modeller or architectural sculptor for the Queensland Trustees building, the Commercial Union Assurance Building, South British Insurance Company building in Queen Street and the decorative moulding on the front of the Burns, Philp and Co warehouse in Brisbane. It is not known if the latter architecture was terracotta or entailed sculpturing stone.

View of Oola castle The castle is a square six-storey limestone tower house. There are circular bartizans on the northeast and southwest corners. The upper windows have hood moulding, and the east and west walls have their original fireplaces. When it was in use, it would have had whitewashed walls, gables crowned with chimneys and mullioned windows.

Matters did not improve. The retail chain Comet acquired 1,600 C5s but nine months later most were still unsold.Adamson & Kennedy, p. 199 Adding to Sinclair's problems, production of the C5 had to be halted for three weeks after numerous customers reported that the plastic moulding attached to the gearbox was impairing the performance of their vehicles.

Veda credits Irfan Sait as her first coach, who taught her the basics of the game. Coaches like Apurva Sharma and Suman Sharma also played a significant role in moulding her as a cricketer. She considered Mithali Raj as a role model when she was a child. Significantly, when Veda was 12, Mithali was felicitated at her school.

It was described as having an excellently constructed interior, wide staircase and with the moulding of its doors and window shutters being a noticeable feature. Today, the house is in a ruinous condition and its surroundings neglected. The former fish pond and features appear infilled and the southern end is occupied by now vacant industrial premises and surrounds.

The production moulds are used to cast the final commercial figures. Polyethylene and polystyrene figures are made by injection moulding. A machine heats plastic and injects it under high pressure into a steel mould. This is an expensive process; it is only cost effective when manufacturing large amounts of figures, since the quantity renders the cost per cast minimal.

Summary of process N) during the process. The precision glass moulding process consists of six steps:Klocke, F. et al.: "Manufacturing of glass diffractive optics by use of molding process", American Society for Precision Engineering (Annual Meeting) 21, 2006, Monterey/Calif.Klocke, F.; Dambon, O.; Hünten, M.:"Integrative Fertigung von Mikrooptiken" erschienen in "WT Werkstatttechnik Online" Heft-Nr.

The base has an unusually thick jadyakumbha, a karnika and a plain pattika. It is followed by a vedibandha and a plain mandovara relieved by three niches, now empty. The temple is roofed by phansana topped by three ghanatas in a row, the form only seen in 11th century. The mukhamandapa has usual moulding of mattavarana.

The north door, fitted with strap hinges, has a four-centred arch and wave moulding. On the east side, there is a four-centred arched doorway with hood-mould. It contains a recess (probably a niche which housed an image in the past). A former doorway has been converted into the south window of the nave.

It has an arched doorway, stepped angle buttresses with crocketted pinnacles and a cross finial. The inner doorway is Norman in style, with a round head, three orders of roll moulding, and a carved tympanum containing a Maltese cross in a circle, a fan-shaped shell to its left, and a knot in a circle to the right.

Borosilicate glass is created by combining and melting boric oxide, silica sand, soda ash, and alumina. Since borosilicate glass melts at a higher temperature than ordinary silicate glass, some new techniques were required for industrial production. The manufacturing process depends on the product geometry and can be differentiated between different methods like floating, tube drawing, or moulding.

"Ball and Chain" was written as a response to the economic policies of Margaret Thatcher. Moulding explained: "The whole Swindon area seemed to be under the hammer. Mrs. Thatcher had come to power a couple of years before, and everything was kind of being battered to the ground. 3 million unemployed -- it was a difficult period".

Of particular note is the inventive mix as instruments sparkle in both left and right channels." The Village Voice critic Robert Christgau wrote: "My reservations about this tuneful but willfully eccentric pop are ideological. ... Partridge and Colin Moulding are moving toward a great art-pop mean that will set standards for the genre. Catchy, funny, interesting—and it rocks.

Wide trough stone moulding is original. There are visible also some stonemasons' marks. There used to be a window in the western side of the church which was walled up in the 16th century and nowadays it is hidden under the plastering. The nave is ended by steep triangular gable walls in the west and the east.

The main facade is five bays wide, with a center entrance sheltered by a Greek Revival portico with Corinthian columns. Its windows are framed by Federal-period eared moulding. The interior includes a Georgian-style central stair, with an arched Georgian window above the landing. Some of the fireplace surrounds reflect Federal and Greek Revival restylings.

The application of the moulding materials can also feel like a soft massage. Models often compare the feeling of a face lifecast to the feeling of a facial. Beauty salons sometimes perform lifecasting when they apply plaster mixed with herbs to the face, over cream, with the goal of gently warming the face with the cream and herbs.

Its front facade is five bays wide, with windows framed by shouldered moulding. The mansard roof is pierced by three dormers with rounded tops. The main entrance is at the center, sheltered by a projecting with paired square columns that have chamfered corners and paneled bases. The interior of the building has been extensively altered over the years.

"Wake Up" is a song written by Colin Moulding of the English rock band XTC, released as the opening track on their 1984 album The Big Express. It was the third and last single issued from the album, following "All You Pretty Girls" and "This World Over", and peaked at number 92 on the UK Singles Chart.

Anaerobic adhesives perform poorly with ASA. Epoxies and neoprene adhesives can be used for bonding ASA with woods and metals. Compared to polycarbonate, ASA has higher resistance to environmental stress cracking, and exhibits lower yellowing in outdoor applications. Compared to polypropylene, ASA has lower moulding shrinkage (0.5% vs 1.5%), higher stiffness, impact resistance, heat distortion temperature, and weatherability.

Micrograph of an esophageal biopsy showing herpes eosphagitis, with the characteristic nuclear changes (nuclear moulding, chromatin clumping at the nuclear membrane (margination) and multinucleation). H&E; stain. Upper Endoscopy often reveals ulcers throughout the esophagus with intervening normal-appearing mucosa. In severe cases the ulcers can coalesce and on rare occasions have a black appearance known as black esophagus.

The ring foot also carries a design of one-legged dragons. This vessel combines the techniques of engraving, high relief and three-dimensional relief in a dignified and refined form with intricately worked designs. It is a perfect fusion of moulding and artistic design representing the very best of bronze-making by the traditional clay mould technique.

There was a kirti-torana, the triumphant arch, in front of sabhamandapa. The pediment and torana no longer exists but two pillars remains. The moulding and decoration is similar to that of walls of sabhamandapa and pillars. There were two more kirti-torana on each side of the kunda of which only one exists without upper part.

The project was planned as a full-length LP, but only six songs were completed due to time constraints. Partridge looked back on its making as the "most fun we ever had in the studio." Each musician adopted a pseudonym: "Sir John Johns" (Partridge) "Lord Cornelius Plum" (Dave), "The Red Curtain" (Colin Moulding) and "E.I.E.I. Owen" (Ian).

" Rundgren contributed a string arrangement, something Moulding had not envisioned for the song. He said "it made the last two bars of the album more optimistic, which I think fitted into his original Day Passes concept. It was the dawn of another day." Partridge concurred: "It was a good ending to the album, fading deep into the night.

The main entrance is set at the center of the Hancock Street facade, beneath a large stained-glass round-arch window. Window bays are articulated by pilasters, and most windows have round-arch tops. The eaves and gable ends are adorned with drip moulding. The porch on the south side has elaborate later Victorian decorative elements.

The influence is very much Roman, and this can be seen by looking at the doors and windows of the tower. At the west doorway, pilaster strips run up the sides and continue over the head in an arch. Within this, there is an arched moulding springing from square imposts. These are decorated with vertical fluting.

Pipe and Lyde is a village and civil parish in Herefordshire, England. The parish includes Pipe and Lyde itself, Lower Lyde and Upper Lyde. The population of the civil parish as taken at the 2011 census was 344. Parts of the church of St Peter date from the 13th century including the south door which features Transitional moulding.

The project was planned as a full-length LP, but only six songs could be recorded due to time constraints. Partridge looked back on its making as the "most fun we ever had in the studio." Each musician adopted a pseudonym: "Sir John Johns" (Partridge) "Lord Cornelius Plum" (Dave), "The Red Curtain" (Colin Moulding) and "E.I.E.I. Owen" (Ian).

Hotel Victoria lobby (2011) In 1997, Hotel Victoria was purchased by the Silver Hotel Group. In 2011, the lobby and guestrooms of the hotel were completely renovated. The original marble pillars and crown moulding were preserved. In 2013, the hotel's owner submitted an application to the city to add eight stories to the hotel, which would double its height.

David Lord was as bad as Andy for tarting things up when they didn't need tarting up." He remembered "a whole afternoon I spent trying to find the right hi-hat sound. It was stupid and the album lacks energy because of it!" Moulding felt the recording was not an enjoyable experience: "It was just too analytical.

Sugar founded Amstrad (Alan Michael Sugar Trading) in 1968. The company began as a general importer/exporter and wholesaler, but soon specialised in consumer electronics. By 1970, the first manufacturing venture was underway. He achieved lower production prices by using injection moulding plastics for hi- fi turntable covers, severely undercutting competitors who used vacuum-forming processes.

An inscription MDV (1505) appears on the base, indicating the date of installation. The translation of the body of the saint is also recorded in the Brescian state archives. The tomb was ostensibly subject to some further work, as MDXXIX (1529) appears on the back of the moulding. The extent of the works, however, is questioned.

The façade was asymmetric and had no moulding. It contained two main doorways, but there were other entrances in Strait Street. The exterior was plain, contrasting with other Valletta buildings, however this was typical when built. Though the exterior may not have had any aesthetically pleasing features, the interior was spacious and adequate for its purpose.

The original brick structure, identified as the "Webb Mill" on the 1859 Walling map, runs parallel to Sumner Brook. A mill race once flowed through the building. The long main factory section has a gabled roof trimmed by a corbeled brick cornice moulding. The exterior of the structure has vertical, metal supports that reinforce the brick walls.

Chaloner was part of one of the many coining gangs that existed. He was taught the subtle techniques of moulding "milled edges" and counterfeiting coins by Patrick Coffey, a goldsmith. Thomas Taylor, a master engraver and printer made the dies. In 1691 Chaloner produced French Pistoles worth about 17 shillings each, using an alloy of silver.

" Lyrically, he cited Ray Davies, John Lennon, and Paul McCartney as his biggest influences. According to biographer Neville Farmer, Partridge and Moulding tended to write about "more general aspects of their lives and their attitudes". Farmer added that "Colin nor Andy handle political or religious matters with subtlety. If they have an idea about something, they say it straightforwardly.

In 1975, Hornby Railways released a ready-to-run model for the Australian market based on the BR Class 08 shunter in a blue/yellow VR livery. The "V.R. 0-6-0 Shunter" used the Tri-ang body moulding and its inaccurate inside-frame chassis. Although resembling the F class, it was not marketed as such.

The breadth decrease at each pavilion; 6 metres at the flight of steps to 3.6 metres at the pavilion. Each pavilion formed by four pilasters is 2.7 metres long. Due to height of 4.80 metre between two pavilion, the thick wall is necessary. There are slightly convex roofs on each kuta in ogee moulding formed by nine horizontal tiers.

There are dark-stained and clear-finished timber skirtings, cornices, picture rails, and architraves in most rooms. Room names are painted on timber panels and fixed above doorways. The timber doors match the other timberwork in the building with circular, glass observation panels, or panels with bolection moulding. Most retain original brass hardware and some the original auto- closers.

It was built and is operated by Kintra Ltd, at an annual charge of £1.2m to Gwent Healthcare NHS Trust. The hospital building incorporates mementoes from the past, including the old Admiralty portico moulding from the front facade of the former Mount Pleasant Hospital, which was located on an adjacent site now developed as a housing estate.

Sathyan Anthikad's Kadha Thudarunnu and Orkut Oru Ormakoot by Manoj Vinod showed a possibility of moulding into character roles and humour apart from the villainy seen throughout and through lineage of the one-time prominent villain actor T. G. Ravi. He also has dubbed his father T. G. Ravi in the movies Ashwaroodan and Pranchiyettan & the Saint.

By the time it passed to him its upper moulding, much of the bead-and-reel decoration of its lower moulding, and (most likely from an act of vandalism of unknown date, perhaps related to iconoclasm) the heads of the figures moving in two processions around the drum had all already been lost. One of Dodwell's images of the Guilford Puteal In the earliest years of the nineteenth century Notara presided over a guest-house for western travellers to Corinth, by which circumstances the Guilford Puteal became known to western Europeans. While there it was seen by Edward Dodwell in 1805 and drawn by his artist Simone Pomardi, and was described by Dodwell in his account of his travels in Greece.Dodwell, A Classical and Topographical Tour Through Greece (1819) ii:200-02.

This entrance leads into a single nave with a wooden ceiling, covered by an interesting roof, the same length as the entrance enclosures. The nave adjoins two rectangular side areas, also with a wooden ceiling, whose use seems to associated with the liturgical rites of the period. this nave joined with the sanctuary by three semicircular brick arches, each of which leads into its corresponding chapel, of which only the main or central one is covered with a brick barrel vault, the other two with wooden ceilings. Above the main chapel is the "typical" chamber, only accessible from outside, through a trefoil window with the standard Pre-Romanesque features; central arch larger than the side ones, resting on two free-standing capitals with rope moulding, and the upper rectangle framed by simple moulding.

The Bell Hill School is a single-story brick structure, measuring about by , resting on a granite foundation. It has a front-facing gable roof with low pitch, covered in asphalt shingles. The cornices are simple wooden boxes, with a piece of ogee moulding on the eave wall. The main (southern) facade has three bays, with a centered doorway flanked by sash windows.

South Auchenmade moss. These tileworks was built in 1831 at North Fergushill farm and consisted of a moulding room, kiln and drying stores. The tileworks were in a field just to the east of an unclassified road between North Fergushill farm and the old Dalry to Kilmarnock railway line. The first manager of the Tilework appears to be a Hugh Bunton or Buntine.

There were other regional variations as well as going by a different name in the USA. Most notably, the headlights were different on the early European models. The front handlebar moulding was later changed to be common across all models, allowing the same headlights to be used. Although the specific light arrangements still vary because of the regulations in different countries.

Shakabpa 2010, p. 400Shakabpa 1984, p. 125 After Nangso Asug's death Lobzang Gyatso performed the bone ritual for moulding his bones and hair into many tsha-tsha images. At some point the family acquired the wider estate of Nyangtren (nyang bran) and Jaisang Depa also became known as Nyangtren Depa (nyang bran sdepa), as well as Depa Drongmepa (sdepa grong smad pa).

Manufacturing of Lego bricks occurs at several locations around the world. Moulding is done in Billund, Denmark; Nyíregyháza, Hungary; Monterrey, Mexico and most recently in Jiaxing, China. Brick decorations and packaging are done at plants in Denmark, Hungary, Mexico and Kladno in the Czech Republic. The Lego Group estimates that in five decades it has produced 400 billion Lego blocks.

Many tubs are made of formed thermoplastics such as PET polyester, polystyrene, or polypropylene. Processes of creating tubs are either thermoforming or injection moulding. Tubs can also be formed of paperboard, molded pulp, and aluminum. Some tubs have special microwave features such as susceptors Tubs can have a heat sealed lidding film attached prior to the lid being placed on.

Doric and Corinthian columns flank the windows around the facade. The second floor windows are high arched and recessed. Here the buildings on either side of the tower differ, the northern half ending with a hipped roof, the southern half continuing on above. The third floor of the southern end contains rectangular recessed windows, the roof resting on a decorative moulding above.

The machine will "play" the disc or stamper and measure various physical and electrical parameters. Errors can be introduced at every step of production, but the moulding process is the least subject to adjustment. Sources of errors are more readily identified and compensated for during mastering. If the errors are too severe then the stamper is rejected and a replacement installed.

The use of forms known from the renaissance were extremely exaggerated. Domes and capitals were decorated with moulding and the former stucco sculptures were replaced by fresco paintings on the ceilings. For the first time, churches were seen as one connected work of art and consistent artistic concepts were developed. Instead of long buildings, more central-plan buildings were created.

The size of the flame and corresponding rate of burning is controlled largely by the candle wick. Production methods utilize extrusion moulding. More traditional production methods entail melting the solid fuel by the controlled application of heat. The liquid is then poured into a mould, or a wick is repeatedly immersed in the liquid to create a dipped tapered candle.

Remains of mass dials (sundials) are at the right of the entrance. The interior contains two stone benches, one each side. The nave door within the porch incorporates large elaborate wrought iron hinges, and is set within a moulded cusped (lobed) door surround. Above the surround is a gabled and crocketed relief moulding, within which sits a figure of the Virgin Mary.

In May 2017, Amcor acquired Plasticos, a specialty container business, from a leading food producer in Colombia. The acquisition expanded Amcor’s specialty container product offerings in Latin America, including thin-wall injection moulding and in-mould labelling. In August 2018, Amcor announced the acquisition of Bemis Company, a US-based manufacturer, through the acquisition of US$5.25 billion in shares.

Her work Crowned (2013) was inspired after her giving birth in 2004 to her daughter. A sculpture of a wall with plaster crown moulding, that has two plaster pelvic bones protruding from the wall and is framed by plaster splashed around the objects. It visually resembles the second stage in childbirth called, "crowning", when the baby's head is surrounded by the vaginal orifice.

The Roddlesworth flows into the River Darwen at Moulden Brow. Between the confluence with Stockclough Brook and the Darwen, the river is known locally as Moulden (or Moulding) Water. For virtually its entire course, the Roddlesworth marks the boundary between Chorley Borough and the unitary authority of Blackburn with Darwen. This border was preceded by that between the Hundreds of Blackburn and Leyland.

A more recent development is the use of digital 3D models made by computer artists. These digital models create a physical model for mouldmaking using rapid prototyping techniques. Alternatively, they can be used directly to drive a computer numerical control machine that cuts the steel mould. They can also simply skip moulding steps and directly produce miniatures from 3D models.

The Helidon sandstone Boer Memorial comprises a pedestal surmounted by a digger statue. It sits on a slightly concave base constructed of sandstone blocks. This is surmounted by a curved moulding and a smooth-faced step which is capped by a series of curved mouldings with shadow reveals between. The pedestal comprises a recessed square section with freestanding columns at each corner.

The monument itself stands on a concrete base step. Above this are two smooth-faced marble steps capped by a rounded moulding. The first step is square in plan, whilst the upper one steps in at the centre of each face. Statue of the weeping mother, 2012 Above this base is a mausoleum type structure comprising four columns and a roof.

The book repeatedly makes dark suggestions as to the boys' future after school. For example, at the end of a triumphant cricket match the masters at Kensingstowe consider what England will do with the young men they are moulding. Radley himself is a weary, beaten figure when he learns that his favourite pupils, Ray and Doe, are off to war.

Werner had followed in his father's footsteps and first became a maker of carriages. He later added a blacksmith shop, a wheelwright shop, and a moulding shop to his business as a carriage maker. His foundry was located in Charleston on the street corner of Cumberland and State. His business soon expanded into a large enterprise throughout the state of South Carolina.

3, (2002), p. 148 > I think it my duty to say that some of the works are much damaged by > ignorant or careless moulding – with oil and lard – and by restorations in > wax and resin. These mistakes have caused discolouration. I shall endeavour > to remedy this without, however, having recourse to any composition that can > injure the surface of the marble.

Once process and tool have been developed, precision glass moulding has a great advantage over conventional production techniques. The majority of the lens quality characteristics are tool-bound. This means that lenses, which are pressed with the same tool and process, usually have only insignificantly small deviations. For example, an important characteristic of a lens is the form of the optical surface.

A sandstone parapet wall is extant along the eastern and western ends at the top of each abutment. Shallow buttresses project from the corners facing the river. Narrow, horizontal sandstone mouldings running the length of each face divide the facades into horizontal sections. On both abutments a moulding runs along the top of the bottom section, the upper section and the wall.

The area is home to a number of businesses, including Forteq UK (the UK operation of a Swiss-owned plastic moulding company), Principle Group (a brand implementation company that makes signage and bank counters), Hyder Living (a bed and sofa manufacturer) and Metal Closures (metal packaging producer). Huddersfield R.U.F.C. played at Waterloo until leaving for a new ground at Lockwood Park in 1997.

Window detail The church is a long rectangular building with high gables of which the original north, east and west walls survive. The west doorway is lintelled on the outside and arched inside. It has Romanesque moulding on the outside and a draw-bar socket. Two round-headed windows in the east wall have hood mouldings on the outside supported by pillars.

The name "Ecphora" is Greek, meaning "bearing out." The word was originally used by Vitruvius to signify the projecture of a member or moulding of a column, and here refers to the distinctive "T-shaped" ribs that project from the shell.Oxford English Dictionary, "Ecphora" entry. The prefix "tris" is added to denote how all members of the genus have three ribs.

Windows are varied in shape, including round-arch windows with drip moulding, and single and doubled sash windows. The house was built by James Baxter Jr., whose daughter Helen married Theophilus King. King owned a leather business in Boston and was president of the Granite Trust Company. The house was listed on the National Register of Historic Places in 1989.

The center bays each have an entrance on the ground floor, topped by half-round fanlight windows. The second-story windows are also topped by similar fanlights, both on the front and the sides. A multistage tower rises at the front of the building. Its first stage is square, with a belfry that has round-headed louvers framed by arched moulding.

The cover by Eric "Doogie" Horner, is a "zombification" of this painting of Marcia Fox by William Beechey. In early 19th-century England, a zombie plague has spread across the country. Miss Elizabeth Bennet, a young woman, lives with her parents and four sisters. Mr. Bennet drills his daughters in martial arts and weapons training, moulding them into capable zombie-fighters.

Both the pulpit and the font are in Caen stone, and are Norman in style. The pews are decorated with cable moulding. The stained glass in the apse windows dates from 1926 and is by Burlison and Grylls. In the windows on the south of the church is glass by Hardman & Co. dated 1907, and by Heaton, Butler and Bayne from about 1919.

J G Miller, Jeff to his friends, takes on his first case at law with the aid of the father of his fiancée Myrtle Shoesmith. Miller’s performance questioning a witness is so lively that it is reported in the newspapers. Myrtle visits him to end their engagement, giving up on her project of moulding him. Jeff is relieved and happy.

Reclaimed timber from Edinburgh Castle and reclaimed Italian Carrera tiles floors were added in recent renovations. At gallery level is the main private apartment, which has a paneled ceiling with star and half moon moulding. Off this room is a modern bathroom. Also at this level is the Laird's Study, with a stone fireplace and access to the second spiral stair.

Hyatt's other patented inventions include the first injection moulding machine, sugarcane milling, juice extraction, roller bearings, and a multiple-stitch sewing machine. John Wesley Hyatt founded the Hyatt Roller Bearing Company in 1892 in Harrison, New Jersey. In 1895 he hired Alfred P. Sloan, son of a major investor in the company, as a draftsman. In 1905 he made Sloan president.

It has roof trim moulding, copper flashing and large arched windows that overlook High Street, the main street in Grand Falls. It has concrete lintels over the doors and windows, and the centre portion of the hall features a peaked roof. Harmsworth Hall became a Registered Heritage Structure in 1998. It is one of very few heritage structures in central Newfoundland.

Increasingly, traces of people involved in bronze-related activities are found. There are finished or semi-finished items, moulds, deposits or isolated items. The tracks of quarries and work-sheds are rather frail, firstly, because of subsequent exploitation, secondly, because of far too few exhaustive archeological investigations. The little workshop for moulding bronze pieces in the Wietenberg settlement at Derşida is well known.

The interior is entirely finished with hardwoods. The walls are covered with vertical beaded-board dados up to chair- rail height, horizontal boarding above that, up to picture-moulding height, and additional vertical boarding up to the ceilings. The ceiling is covered with boards, and the floor has original hardwood floorboards. The waiting room contains an original fireplace with mantelpiece.

The walls are plastered with Keens marble cement to dado height, and capped with a plaster moulding, all now painted. Door and window architraves, a band mould under the sills and pilasters are of painted white plaster. The original furniture and cedar joinery remain intact. The ceiling comprises painted timber panels supported by decorative brackets with large Wunderlich ventilators in the central panels.

In particular the manufacture of its own sulphuric acid for use in the refinery. Other manufacturing included packaging the kerosene in tins and a candle-moulding shop. In 1886 the School of Arts was constructed and was used for regular church services by ministers from Mittagong. As a result of competition from cheap American imports the refinery and the retorts closed in 1896.

As Intendant of New France, Hocquart was charged with "moulding the Canadian economy into a flourishing extension of the French imperial economy by increasing its capacity to supply the metropolis and other French colonies with materials they required while expanding the Canadian market for French goods."Donald James Horton. Gilles Hocquart, intendant of New France, 1729-1748. Montreal: McGill University, 1974.

124, 129–30 A two-storey 19th-century extension in brick faces Second Wood Street. Mounting block The timber frame has large tension braces (diagonal timbers) which are straight rather than curved as in similar buildings of an earlier date, such as the Chantry House in Bunbury.McKenna, p. 16 The timber work is of high quality and features ovolo moulding.

Windows are two-over-two sash, and both door and window moulding is very simple. The interior retains a number of original period features, include some wide floorboards, wooden wall paneling, and fireplace mantels. An early 20th-century garage stands just north of the house. The house was built about 1784 for Urbana Woodruff, and is a good example of vernacular Georgian architecture.

A large concrete pulpit, to which access is provided by three steps, is found in the choir section of the church and is decorated in the manner of the exterior of the building, painted white and featuring the repeated arch moulding as a cornice. A sandstone baptismal font is elevated on small platforms in the south western corner of the church.

For a two- shot mould, two separate materials are incorporated into one part. This type of injection moulding is used to add a soft touch to knobs, to give a product multiple colours, or to produce a part with multiple performance characteristics."Injection Molding ", Meridian Products Corporation, Retrieved April 26, 2016. For thermosets, typically two different chemical components are injected into the barrel.

Paper clip mold opened in molding machine; the nozzle is visible at right A 1300-ton injection molding machine with robotic arm An Injection molding machine, or (Injection moulding machine BrE), also known as an injection press, is a machine for manufacturing plastic products by the injection molding process. It consists of two main parts, an injection unit and a clamping unit.

The whole piece was then gessoed and gilded. Painting the image on the flat panel was the last thing to be done." Field Marshal French and Marshal Joffre. When it was realized this method of producing a frame and the image within in one slab of wood was too costly, "a more efficient method was eventually developed which used mitred moulding strips.

When reviewed with these thoughts in mind the California GS delivered quite nicely. They were fitted with the small block GS drivetrain and the exterior received the full treatment including vinyl top, chrome moulding package, GS emblems, and special California scripts. This marketing approach was also used in Colorado, using the "Colorado" name instead of "California".1969 Buick GS Colorado, www.flickr.

The outer two bays have rectangular openings filled with sash windows, topped by a keystone. The central section is flanked by stone pilasters. The interior lobby space of the building features terrazzo marble flooring, marble wainscoting and door trim, and plaster walls with dentil moulding at the cornice. Some of the interior is later 20th-century work, done to match existing original trim.

The World War Two Memorial, which sits to the rear of the park is a simple obelisk, with a base of two sandstone steps surmounted by two white marble steps the upper one with a simple carved moulding at the top on which sits the tall tapering column of white marble on the south side of which a wreath and gun are carved.

XTC in 1980. From left: Colin Moulding, Andy Partridge, and Dave Gregory. XTC's previous album Mummer was their first work after resigning from live performances in 1982. It was released in August 1983 after several months of delays due to the band's creative difference with producer Steve Nye and Virgin Records and became the group's lowest-charting album to date.

The Sunday Times, 11 October 1998. Business (Section 3) page 13. JFJ’s newfound injection moulding capabilities, which were virtually unique at the time for a company of its size, led to a radical rethinking of its manufacturing activities. Its work became centred upon producing parts for the expanding television market such as cable assemblies, connectors and, most notably, set-top antennas.

A variant of the Archimedes screw can also be found in some injection moulding machines, die casting machines and extrusion of plastics, which employ a screw of decreasing pitch to compress and melt the material. It is also used in a rotary-screw air compressor. On a much larger scale, Archimedes's screws of decreasing pitch are used for the compaction of waste material.

The storefronts typically consist of display windows flanking a recessed entry. Second floor windows are set in round-arch openings with stone keystones and shoulders, with a narrow stringcourse acting as a sill. The third floor windows have segmented-arch openings, but are otherwise similar. The dormers on the steep roof section have shallow gabled roofs, with drip moulding around the windows.

"This, then, is the formula," he wrote: "honest material and the finest craftsmanship that can be put into the moulding of it." Also in 1927, Edward patented a new polo stick head, followed by a stronger stick in 1928. In the 1920s and 1930s the firm greatly expanded its range of handcrafted umbrellas. These used frames made by Samuel Fox of Stocksbridge.

The firm was established in Carrington in 1854. In 1870 the name was changed to Rodgers Bros. and the business moved to King Street on which City Hall now stands. The land was swampy and required six feet of fill to prepare it for the new engineering works including a blacksmiths' shop, fitting and machine shop and a moulding shop.

Marinha Grande is the most reputed glass making centre of Portugal. Leiria, Oliveira de Azeméis, Vale de Cambra and Viseu, have important light industries, including injection moulding and plastics. Viana do Castelo and Setúbal are centres of ship building and repair industries. Modern non-traditional technology-based industries like aerospace, biotechnology and information technology, have been developed in several locations across the country.

The manufacturing process involved moulding buckram over a layer of plastic wood, overlaid with steamed felt. The faces were then handpainted on, with a waterproof coating to make them washable. Wellings exhibited at the British Industries Fairs in 1927 and 1929. She was listed as a 'Manufacturer of Soft Fabric Toys of Distinction' and the range included dolls, plush novelties, and mascots.

Chris Murray of RPM wrote: "From start to finish, this LP is full of Andy Partridge's idiosyncratic songs, true to the form XTC has established over the past decade. Unfortunately, this sold record breaks no new ground which might elevate them from the presently secure cult status." Gary Ramon called it an "uneven" collection containing "the weakest" songs of Moulding.

Darren Moulding (born December 2, 1982) is a Canadian curler from Lacombe, Alberta2018 Brier Media Guide and curls out of the Saville Sports Centre and the Lacombe Curling Club. He is a former Canadian Junior Silver Medallist, a Canadian Mixed Champion, and represented Alberta in the 2017, 2018, 2020 and Team Wild Card in the 2019 Brier Canadian men's championship.

Its windows and door openings have pointed heads. Detailing to the spire includes: recessed pointed head arches, accented by tracery; voussoirs, alternately projecting; and elaborate moulding. A lighter coloured brick articulates the pointed heads of the church's other window and door openings. Internally the church still contains most of its original fittings and furnishings including timber bench pews and decorative timber entrance screen.

The difference comes from the application of the fibre and resin material to the mould. Spray-up is an open- moulding composites fabrication process where resin and reinforcements are sprayed onto a reusable mould. The resin and glass may be applied separately or simultaneously "chopped" in a combined stream from a chopper gun. Workers roll out the spray-up to compact the laminate.

The eaves of the main roof, vestibule, and gables are lined with dentil moulding. The entry vestibule has a pair of entrances, each topped by a half-round multilight transom window. In between the entrances is what appears to be an entrance surround, consisting of pilasters supporting a corniced entablature. The framed space is presently occupied by a notice board.

"Wonderland" is a single by XTC released in June 1983, written by Colin Moulding and taken from the album Mummer. Unlike most of XTC's work, which usually features a more guitar-oriented sound, "Wonderland" is heavily-laden with synths. This was the only single issued in the U.S. by Geffen Records from the album. A promotional music video was directed by Peter Sinclair.

The mill was rebuilt and making of paper was resumed in 1605. The museum was opened for visitors on July 26, 1968, and three years later paper production by hand was launched on show. The moulding room soon became an attraction drawing tens of thousands of tourists every year. The flood of 1998 inflicted a great damage on the paper mill.

It highlights the principle of cooperation in cultivation which, in turn, helped in moulding the community life of the people of Tulunadu. It is a collectively executed task in which every household participates with men and animals. Celebrated in the traditional way in the household family here every year. The villagers and the Guttinamane family celebrates the ritual with pomp and gaiety.

120: "the town-house of the Earls of Carlisle, built in the time of James II." It was a three-storey house of brown brick with stone band-courses separating the storeys and a triangular pediment ornamented with egg-and-dart moulding below and leaf moulding above. The railings in front were probably a later addition, and fine plasterwork had been added in about 1740 to the staircase and one of the rooms on the first floor. The house's association with the Carlisles did not begin until 1717 or 1718, when the estranged wife of the third earl inherited it from her mother, the dowager Countess of Essex. Lady Carlisle rented it out from 1718 to 1724 to a James Vernon, possibly either the MP or his son, also an MP, and lived there herself from 1725 until she died in 1752.

Innsbruck Cathedral interior The cathedral interior projects a "severe monumentality" based on a series of heavy pillars that create a repeated triumphal arch motif.Caramelle p. 10. The pillars support the saucer domes that are in fact mock vaults consisting of flat wooden ceilings with concave moulding that spans the width of the interior. The segmented walls are divided by the pillars with marble lesenes on all sides.

The bottles are made by moulding the pulp of wood fibre which is then pressed into shape. The plastic liner is automatically vacuum formed and inserted into one half shell, another half shell is placed on top and the two are then sealed together. The bottles are designed to easily integrate with existing filling lines. The bottles can be printed, labelled and/or embossed.

The performance of fluoroelastomers in aggressive chemicals depends on the nature of the base polymer and the compounding ingredients used for moulding the final products (e.g. O-rings, shaft seals). This performance can vary significantly when end- users purchase polymer containing rubber goods from different sources. Fluoroelastomers are generally compatible with hydrocarbons, but incompatible with ketones such as acetone and organic acids such as acetic acid.

Several minerals are found in the coastal corridor namely beach sand, heavy mineral deposits such as Ilmenite, Leucoxene, Monazite etc. An estimate of tonnes of deposits of mineral reserves are present in the beach sand of the state coast. Silica sand reserves are found along the coastal areas of Prakasam, Nellore and Guntur districts. Silica sand are used for Moulding sand, Sodium silicate, Ceramic, glass etc.

The first floor exterior of the front elevation was symmetrically designed with a central pair of doors, beneath a transomed multi-paned arched- window, surrounded by one multi-paned arched-window on each side. A pedimented gable was surrounded by simple moulding enclosing a tympanum decorated with a Latin cross in relief. A square tower supporting a Gothic Revival steeple at the front dominated the church's facade.

De Laurentiis and Ponti remained with Lux until they formed a partnership in 1950, though Ulysses (1954) and some of their other later productions benefited from the support of Lux. Lux suffered from a run of loss making productions during the 1950s, which led to a gradual reduction in its production schedule.Pauline Small Sophia Loren: Moulding the Star, Bristol (UK) & Chicago: Intellect Books, p.37, n.

The west end has a gable. Adjoining its east end is the main building, of two-and-a-half storeys and five bays, with a slightly off-centre two-storey gable-roofed entrance porch in the centre bay. The easternmost bay is gable-ended and has a modern casement window. All other windows have hood moulds with intricate carvings, ovolo-style moulding, transoms and mullions.

From this point things happened very quickly, and by September the building had been completed and the major shift had been accomplished. In 1987 a major expansion of the Carole Park plant was executed, taking the buildings to the maximum size allowed on the area of land. Plastic injection moulding machines were installed, and a new range of products using the latest technology emerged.

Cave 1 pillar is second from right; The rightmost pillar is in Cave 19. Cave 1 is the southernmost cave and a false one because one of the side and its front is not of the original rock but added in. Its roof is integrated from the natural ledge of the rock. It moulding style is similar to those found in Tigawa Hindu temple.

Titanium powder metallurgy (P/M) offers the possibility of creating net shape or near net shape parts without the material loss and cost associated with having to machine intricate components from wrought billet. Powders can be produced by the blended elemental technique or by pre-alloying and then consolidated by metal injection moulding, hot isostatic pressing, direct powder rolling or laser engineered net shaping.

Above is a V-shaped stone moulding with two carved bosses and an intricately carved quatrefoil containing a dragon and foliage. The word "bank" is incised above the entrance. There are two stone mullioned and transomed windows on the ground floor, which each consist of five two-light units with pointed arched heads. A two-unit "window" to the left of the main entrance is blocked.

The tower is topped by a low-pitch hip roof with broad eaves decorated with paired brackets and dentil moulding. The mill was organized in 1872 and built for the manufacture of cotton cloth with a capacity of 43,480 spindles. Augustus Chace served as the company's first president. In 1895, a two-story granite addition measuring 310 feet by 120 feet was built for weaving.

The line of the previous 13th- century north transept is defined by a pointed relief moulding above. The south stub transept window is Early English, incorporating four lancet lights with three quatrefoil rosettes above. The 14th-century south porch is of the same banded limestone and ironstone, and set on an ashlar plinth. Its pointed and moulded arched entrance is supported by octagonal pillars.

Moulding an artistic casting in the Kasli Iron Works Kasli cast-iron sculpture was produced in Kasli, southern Russia, from the mid-19th century. A large collection, including an elaborate pavilion from the 1900 Paris World Fair,The Kasli Cast Iron Pavilion. At izi.travel. Retrieved 15 July 2020 is displayed in the Yekaterinburg Museum of Fine Arts There is also a Kasli Museum of Iron Sculptures.

The later-built eastern bridge is largely similar to the western structure; one difference is the presence of stone roll moulding around the arch rings, there are also no refuges or railings installed. In comparison, the parapets of the western bridge have stone coping with rounded edges, broken by open steel refuges over every pier, along with steel railings along the top of the parapet.

6/99 #The glass blank is loaded into the lower side of the moulding tool. #Oxygen is removed from the working area by filling with nitrogen and/or evacuation of the process chamber. #The tool system is nearly closed (no contact of the upper mould) and the entire system of mould, die and glass is heated up. Infrared lamps are used for heating in most systems.

In order to ensure the desired quality the parts are measured between each process step. Additionally, the parts are handled and transported carefully between the processing and metrology steps. #Hotforming of gobs: The precision glass moulding process yields the best results in both quality and cost if it works with precise preforms. These are usually acquired by pressing or hotforming of "gobs" of molten glass.

Due to the fast cooling after moulding, the part retains a small amount of residual stress. Consequently, the glass exhibits a small change in the refractive index which has to be considered in the optical design. A higher cooling rate corresponds to a larger decrease of the refractive index. A lower cooling rate could circumvent the index drop, but would be less cost-efficientDeegan, J. et al.

If mould is not suitable, it has to be reground. It is part of an iterative loop. The assembly of the mould has to be put into the machine to start the try-out-moulding. In order to save the quality and enable an early warning in case of any problems between every single step there has to be a step of measurement and referencing.

The entrance is relatively unadorned, with simple moulding framing the door. Upper level windows butt against the eave, and the building corners have narrow trim. The right facade has five windows: two on each of the main floors, and one in the attic level. With The house was probably built sometime between 1809, when John Hoadley purchased the land, and 1812, when he sold it.

He lectured, demonstrated and exhibited widely and was the subject of two television documentaries. Godfrey's work combined thrown and hand built forms made with white earthenware clay, inspired by observing his surroundings and found objects. His teapots were often made using non traditional press moulding techniques, utilising cut cardboard boxes. Potter Hannah McAndrew described his work as "bright beasts, immaculately made, vibrant and smiling".

The plan is symmetric and U-shaped, with a basement, ground floor and second floor; the building forms an imposing presence in the city center. The grooved columns are both Ionic and composite. The pediment features symbolic bas-reliefs and acroteria. The cornices are denticulate, there is egg-and-dart moulding, as well as meanders, decorative balustrades, semicircular niches, bossage in strong relief and medallions.

The basements of these buildings were constructed of monumental blocks of stone, cut to different sizes, carefully dressed and very finely fitted together. The bridge connecting the two platforms was formed out of a single slab of stone. Some such slabs measured by . The sides have been cut with precision where the joints between the slab and the stone moulding of the platforms are hardly perceptible.

Ole Kirk Christiansen and his son Godtfred became aware of the Kiddicraft brick after examining a sample, and possibly drawings, given to them by the British supplier of the first injection moulding machine they had purchased. Realising their potential, Ole modified the Kiddicraft brick and in 1949 marketed his own version, The Automatic Binding Brick, that became the Lego brick in 1953.Christiansen, Godtfred.

A Lego injection moulding plant in Neuhof, an area of Baar, Switzerland Lego products are mass-produced, packaged and shipped on a large scale. Lego Produktion AG was a major production facility for Lego. It was founded in Switzerland in 1974. At the time of its announced closing in 2001, 30% of the world production of Lego was produced at the Swiss facility in Baar.

Rather than gradients of tone or color, these works are painted with flat, uniform sections of tone and color. Albeit, in Femme au miroir Metzinger uses a textured surface in the lighter blue areas. Some minimal brushstrokes remain visible throughout these paintings. Each painting represents objects or elements of the real world—such as perfume bottles, moulding of the walls, an ear ring—and human figures.

The main roof has a cornice studded with sawn brackets, but only covers the structure. A lower roof provides shelter around the exterior for pedestrians; it is supported by large knee brackets, and has a band of decorative moulding at the edge. An octagonal turret projects from the building's northwestern corner. The building exterior is clad in a variety of wooden clapboards and shingles.

A single brick chimney with a simple brick moulding protrudes above the roofline and is capped with two decorative terracotta pots. The external walls of the main house are hand-planed pine chamferboards which are approximately wide. Internal walls and ceilings throughout the house are vertically lined with tongue and groove boards. The house contains seven main rooms, four at ground level with three upstairs.

In the 1970s Enzo Mari designed distinctive Dutch ovens and saucepans with domed lids and typical handles. In the 1980s JC Barrault's "Futura" line was launched. In 1995, Le Creuset began exploring new product categories: stainless steel, stoneware, silicone, enamel on steel, textiles and forged hard-anodized aluminium. The current Le Creuset logo was introduced in 1970 as a symbolic representation of metal casting and moulding.

The castings produced have rough spots and excess material. The moulding sand becomes incorporated into the casting metal and decreases the ductility, fatigue strength, and fracture toughness of the casting. This can be caused by a sand with too little strength or a pouring velocity that is too fast. The pouring velocity can be reduced by redesigning the gating system to use larger runners or multiple gates.

"Grass" is sometimes mistaken to be about cannabis, but was actually written about Coate Water, a parkland in Swindon. Moulding composed it on an open E-tuned guitar and found its harmonic changes by playing the chord shapes of Thunderclap Newman's "Something in the Air" (1969). The mixing of violin and guitar was an idea lifted from John Lennon's "How Do You Sleep?" (1971).

When touring resumed on 23 November, every date was sold out. Elsewhere, A union of 100,000 steel workers went on strike and contacted Moulding for a statement on their issues, but he offered no comment. British Steel also gathered four Sheffield employees named Nigel to discuss job satisfaction for the trade publication Steel News. The LP sold particularly well in Canada, Europe and Australia.

In the north wall of the chancel is an aumbry, and in the south wall is a piscina. The pews are box pews, one of which has a desk dated 1707 attached to its back. Also in the church is a pair of Jacobean seats with carved canopies. The circular Norman font is elaborately carved with rope moulding, a dragon, interlace, foliage, and medallions.

Given the wear of the gold leaf on the backrest, the moulding of the armrests and the ornamental portrait heads, it is thought that the chair was used on a day-to-day basis. But in addition it was also a piece of ceremonial furniture. The scenes depicting a gift of gold probably refer to the first Nehebkau festival of Amenhotep III.André Wiese, Tutanchamun.

The church of St. Peter's at Clippesby is thought to date from Saxon times. Curiously however there is no mention of it in the Domesday Book. The round tower is certainly of Saxon construction as is a small (now sealed) window, whereas the North doorway with its characteristic zig-zag moulding is Norman. The tower was augmented with an octagonal bell tower in the early 1900s.

The original Plasticine was grey. Four colours were produced for initial sale to the public. Plasticine was popular with children, was widely used in schools for teaching art, and has found a wide variety of other uses (for example moulding casts for plaster, and plastics). Plasticine is approximately 65% bulking agent (principally gypsum), 10% petroleum jelly, 5% lime, 10% lanolin and 10% stearic acid.

The second stage is an open belfry (now lacking a bell), with paneled square posts joined by segmental arched moulding. It is also topped at the corners by a narrower set of Gothic spires. The main facade is symmetrical, with a pair of entrances flanking a central window, and windows above each of these elements. Windows on the sides are topped by Gothic fans.

Another favourite bassist of his is Stanley Clarke.: The influence of Motown and James Jamerson, : Stanley Clarke. McCartney's skill as a bass player has been acknowledged by bassists including Sting, Dr. Dre bassist Mike Elizondo, and Colin Moulding of XTC. During McCartney's early years with the Beatles, he primarily used a Höfner 500/1 bass, although from 1965, he favoured his Rickenbacker 4001S for recording.

St. Michael's were successful in recruiting players and providing a complete education at the same time. The college built a strong reputation in moulding outstanding and well-rounded young citizens. Four years after the hockey program started, St. Michael's were Canadian Amateur Champions, winning the Allan Cup in 1910. ;Birth of the Majors In 1933, the Ontario Hockey Association's Junior division, split into 'A' and 'B' levels.

Single-story porches with spindled valances flank the Adams Street facade. Most windows are framed by moulding with shallow cornices above and tab feet below the sill. The land on which the house stands was sold by the Waltham Watch Company in 1868 to Charles Baker. A house of different configuration is recorded as standing here in 1874; the present house appears on an 1886 map.

Flaxwood produces and assembles their instruments and parts in Heinävaara. The raw material is provided by Kareline and the moulding operations are carried out at All-Plast's facility. The parts that come out of the mould are shaped with the cavities, pockets, joints and practically all the holes. They are then assembled and finished by hand with tools that are commonly used in traditional guitar workshops.

A photograph of the ceiling area taken while the room was being dismantled previous to the Truman reconstruction, shows the simple c. 1818 moulding and several pieces of Victorian era wall paper. Plaster decoration and wood trim was removed from the room with the intention of reinstalling it after the reconstruction. Like much of the salvaged wood and plaster from the house, it was pronounced unusable.

In 1971, Renault introduced a plastic bumper (sheet moulding compound) on the Renault 5. Current design practice is for the bumper structure on modern automobiles to consist of a plastic cover over a reinforcement bar made of steel, aluminum, fiberglass composite, or plastic. Bumpers of most modern automobiles have been made of a combination of polycarbonate (PC) and acrylonitrile butadiene styrene (ABS) called PC/ABS.

Sony used co-moulding technology to create a unique solid design. Featuring a design similar to its predecessor, the Xperia SP has an aluminium frame with a plastic polycarbonate removable back and a transparent strip that run across the bottom of the device. The transparent strip acts as the antenna of the phone, notification LED bar and also illuminates when music is being played.

The earliest known ceramic objects are the Gravettian figurines from the Upper Paleolithic period, such as those discovered at Dolní Věstonice in the modern- day Czech Republic. The Venus of Dolní Věstonice (Věstonická Venuše in Czech) is a statuette of a nude female figure dating from some time from 29,00025,000 BCE. It was made by moulding and then firing a mixture of clay and powdered bone.Chris Stringer.

Kori Kambla is a distinct agriculture-based celebration in Tulunadu. This refers to a kind of collective ploughing and planting on a fixed day for the enelu(Tulu: ಏಣೆಲ್) cultivation. A general race of buffaloes is known as kori (kandoe korune)[1] Kambala. It highlights the principle of cooperation in cultivation which, in turn, helped in moulding the community life of the people of Tulunadu.

"Grass" is sometimes mistaken to be about cannabis, but was actually written about Coate Water, a parkland in Swindon. Moulding composed it on an open E-tuned guitar and found its harmonic changes by playing the chord shapes of Thunderclap Newman's "Something in the Air" (1969). The mixing of violin and guitar was an idea lifted from John Lennon's "How Do You Sleep?" (1971).

It is possible to manufacture a complicated 3D shape from in-situ bonded AFS. In case of the second type, i.e. integral foam moulding, the desired geometry of the foamed part is achieved by designing the mould inside which the foam is cast.Carolin Koerner, Book – Integral foam molding of light metals: technology, foam physics and foam simulation, Springer-Verlag Berlin Heidelberg, 2008, p.19.

The sequence of events during the injection mould of a plastic part is called the injection moulding cycle. The cycle begins when the mould closes, followed by the injection of the polymer into the mould cavity. Once the cavity is filled, a holding pressure is maintained to compensate for material shrinkage. In the next step, the screw turns, feeding the next shot to the front screw.

The Henry Gane House is a historic house at 121 Adena Road in Newton, Massachusetts. Built c. 1860s, the two-plus story wood frame house is distinguished as one of Newton's finest Second Empire houses. Its eaves are lined with dentil moulding and paired brackets, its windows have elaborate hoods, and its porch, which wraps around two sides of the house, has elaborate woodwork detail.

Gaudí rarely drew detailed plans of his works, instead preferring to create them as three-dimensional scale models and moulding the details as he conceived them. Gaudí's work enjoys global popularity and continuing admiration and study by architects. His masterpiece, the still-incomplete Sagrada Família, is the most-visited monument in Spain. Between 1984 and 2005, seven of his works were declared World Heritage Sites by UNESCO.

Much of Lawson's classical work is in the town of Oamaru, north of Dunedin. Here, as in Dunedin itself, Lawson built in the local Oamaru stone, a hard limestone that is ideal for building purposes, especially where ornate moulding is required. The finished stonework has a creamy, sandy colour. Unfortunately, it is not strongly resistant to today's pollution, and can be prone to surface crumbling.

The damaged part was rebuilt in Early English style. The west front has a huge entrance consisting of four arches (1170–90) above a later 15th-century doorway. The entrance is decorated with diaper pattern and stiff-leaf moulding providing relief for a profusion of small arches. To the south west of the church is the 15th-century gateway, a reminder of the long-vanished priory.

The Nahum Hardy House is a historic house at 724 Lexington Street in Waltham, Massachusetts. The -story wood frame house was built c. 1845, and is a well- preserved local example of a Greek Revival side-hall house. It has a fully pedimented gable end, a full entablature with dentil-like peg moulding, and a single-story porch with Tuscan columns (probably a later addition).

The church is noted for its Late Norman north door, with chevron mouldings, and a Norman chancel arch, leaning outwards, also with chevron moulding. The nave roof was rebuilt in 1923-4 by Sir Philip Stott. The font is a Norman bowl, remodelled into an octagonal shape in the 14th century. Most of the furnishings in the church date to the 1860-1 restoration.

Parts of the pillar are broken. Behind the relic-shrine, are six eight-sided pillars, arranged in a curve. "The stupa consists of a drum with a moulding below and railing above, a globular dome and a corbelled (with "a projection jutting out from a wall to support a structure above it") dome with a railing at the base." The stupa has Buddhist tridents carved on it.

On the first floor, the right two bays are taken up by a polygonal wood-frame window bay with a bracketed roof. Second- floor windows are set in segmented-arch openings crowned by a decorative hoods with drip moulding. The right wall of the building has a projecting oriel window with styling similar to the front bay. The building's builder and construction date are not known.

In the 19th and 20th centuries, Cockle-Bread became the name of a children's game, played to a nursery rhyme in which the bread is mentioned: Writing in Observations on the Popular Antiquities of Great Britain in 1854, John Brand describes the nursery rhyme as "modern", but adds that its connection to the earlier "moulding" of cockle bread "is by no means generally understood".

It was built in Islamic style with a high, domed tower in the center, domed pavilions at the corners, minarets and multi-foliated arches in the facade. The palace is divided into two parts: the front is for males and the rear for females. The most important portion is the drawing room in the front with a fireplace, moulding and an ornamental ceiling painted with gold powder.

Possibly the most interesting feature is the huge Norman font, decorated with roll-moulding. The saddle-back, west, tower was probably added during the 14th century. Since the church appears to be in need of repairs, particularly after a series of spring storms in 2016, a village fund raiser was held at the Horseshoe Inn in May 2016, to help with the costs of the work.

These puzzles usually have a set of masters 3D printed, which then are copied using moulding and casting techniques to create the final puzzle. Other Rubik's Cube modifications include cubes that have been extended or truncated to form a new shape. An example of this is the Trabjer's Octahedron, which can be built by truncating and extending portions of a regular 3×3×3.

The temple stands on a low platform which is now buried. The vimana is ancharatha on plan as distinguished by a central raha a pair of anuratha pagas and kanika agas on the either side of the raha. n elevation, the temple has a trianga bada measuring 2.90 metres in height. Pabhaga easuring 0.75 metres has four moulding of khura, kumbha, pata, and basanta.

The north transept is probably 13th century and features two lancets flanking the 15th century east window. Tudor windows line the north transept and lie on the west side of the aisles. Square-headed clerestory windows feature a stilted drip moulding. In the interior of the church, the arcades date principally from the 13th century and incorporate older 12th century structure, but the work is not uniform.

Shellac was historically used as a protective coating on paintings. Sheets of Braille were coated with shellac to help protect them from wear due to being read by hand. Shellac was used from the mid-nineteenth century to produce small moulded goods such as picture frames, boxes, toilet articles, jewelry, inkwells and even dentures. Advances in plastics have rendered shellac obsolete as a moulding compound.

At the center of the gable is a half-oval fanlight in the Federal style. There is a single main entrance, placed at the center of the front facade, with sash windows on either side. Both the windows and entrance are trimmed by narrower Federal-style moulding. The structure was built in 1844 to serve the town's municipal needs, a function it continues to serve today.

Vacuum bag moulding uses a flexible film to enclose the part and seal it from outside air. Vacuum bag material is available in a tube shape or a sheet of material. A vacuum is then drawn on the vacuum bag and atmospheric pressure compresses the part during the cure. When a tube shaped bag is used, the entire part can be enclosed within the bag.

Given the launch of Race 'n' Chase in 1978 and the great numbers it sold in both the UK & US this would have been quite a feat. By 1979 Matchbox were developing additional cars and this brochure packed with the UK Race 'N' Chase included the intriguing examples of familiar cars. The Red Escort is numbered 1, not 8. The moulding is clearly new and lacking windows.

The pointed tower arch, of three chamfered orders, is blocked and flanked by semi- circular headed niches. The chancel arch is pointed, has dog-tooth moulding and is supported on short columns with foliated capitals. Similar detailing has been used by Street throughout the chancel. Throughout the church there are wagon roofs, plastered in the nave and aisles and ornately painted in the chancel and transepts.

Moulding praised the film and commented on the possibility of a full-fledged XTC reunion: "They say never say never, don't they? It would seem unlikely, put it that way." As of January 2018, Partridge maintained that the group would "not be recording together again." From 29 October to 1 November, TC&I; performed four sold-out shows at Swindon's Art's Centre, in Old Town.

Moulding used primarily a Wal bass with a Fender P-Bass as backup. Partridge played a Fender Telecaster Squire and a Martin D-35. Fox, who had a background as a session keyboardist, supplied the group with numerous digital and analogue synthesizers (mainly an Emulator III and a Roland Super Jupiter). A variety of drum machines were also used and mixed in tandem with Mastelotto's live drumming.

Perhaps the house's most prominent detail is its extravagant and slightly whimsical bargeboards, which define its Gothic Revival heritage. It is because of this feature that the house is sometimes colloquially described as a gingerbread house. The bargeboard of each gable features an alternating pattern of quatrefoil piercings, with applied florals of the same design. The bottom half is curvilinear, pierced with trefoils and applied moulding.

The Jewell House of Art and Nature, title page 1653 The Jewell House of Art and Nature, 1653, p. 214 In 1594 there appeared 'The Jewell House of Art and Nature, conteining divers rare and profitable Inventions, together with sundry new Experiments in the Art of Husbandry, Distillation and Moulding. By Hugh Platte of Lincolnes Inn, Gent.,' London, 1594; dedicated to Robert Devereux, 2nd Earl of Essex.

The First World War Memorial is located in a park setting and is surrounded by cast iron posts with decorative finials. The sandstone and granite memorial sits on a stepped concrete base with the cast iron posts fixed into the lower step. Above this is a smooth faced step capped with a cyma recta moulding. The front face bears the words "Their Name Liveth Forever More".

Jellore Cottage is a single storey weatherboard cottage with gabled roof continued as a skillion over the front verandah. Has 2 external brick chimneys at east end with simple band of projecting brickwork as neck moulding. The timber framed verandah is supported on 5 square timber posts (not original). The weatherboard lining of the main gable end walls is continued over the ends of the verandah.

Shortly after this a US distribution company, Swecoin US Inc, was founded in Rhode Island. The company grew organically and through acquisitions during the 1990s. Acquisitions included the component distribution company Promakon, the injection moulding company Nya Ovansjö Plast och Verktyg and the Pay and Display Parking machine manufacturer AB Cale Industi. In 1997 the Swecoin Group was acquired by Metric Gruppen, owned by Rune Andersson.

When Māori greet one another by pressing noses, the tradition of sharing the breath of life is considered to have come directly from the gods. In Māori mythology, woman was created by the gods moulding her shape out of the earth. The god Tāne embraced the figure and breathed into her nostrils. She then sneezed and came to life, creating the first woman in Māori legends, Hineahuone.

Acquired from Rolls Royce by Powell Duffryn, the company was merged with Hamworthy and headquartered for a period in Gloucester. In 2001, NYSE-listed Gardner Denver agreed to acquire Hamworth Belliss and Morcom, which was immediately renamed Belliss and Morcom, headquartered again in Redditch. Today the company manufactures, supplies and services oil free reciprocating compressors, with a specialist division focusing on recycled PET plastic moulding.

Ploger-Moneymaker Place, also known as Aambler, is a historic home located at Lebanon, Laclede County, Missouri. It was built about 1870, and is a two- story, "T"-shaped frame dwelling. It features a wraparound front porch supported by round columns and a two-story bay with decorative moulding. (includes 7 photographs from 1980) It was listed on the National Register of Historic Places in 1982.

In an article in the St Vincent's Hospital Melbourne newsletter, Xu explains that "the average hat can take up to a week to create and is made in various stages, from moulding the base to sewing and affixing different elements and adornments"."Hats off to our resident nuclear medicine milliner" , The St Vincent Hospital Newsletter October 2013 - page 10, October 2013. Retrieved 18 October 2013.

The gables and eaves (including those on the roof of the projecting bay) have dentil moulding and brackets. There is a three-story turret in the crook of the L, also topped by a mansard roof. The house was built in 1869 by Moses Mann and James Mann, local builders, as a speculative venture. Its design is apparently based on one published in a pattern book.

The tenth production P-51B 43-12102, prototype for the P-51D, showing the modified rear fuselage and new canopy and windscreen. Following combat experience the P-51D series introduced a "teardrop", or "bubble", canopy to rectify problems with poor visibility to the rear of the aircraft.Kinzey 1997, p. 5. In America, new moulding techniques had been developed to form streamlined nose transparencies for bombers.

Drummer Matt Tong was initially sceptical of moulding songs with programmed drums, as opposed to using his physical output, but agreed to the idea when the band recorded some of the tracks in their entirety. On some songs, the guitars were disregarded and the band focused solely on the beat. Okereke's voice was often used as an instrument by being looped, vocoded, or run through effects pedals.

In Roman > and Italian work the moulding is called by workmen a quarter round. The "egg and tongue" referred to, also known as egg-and-dart, egg-and-anchor, or egg-and-star, refers to alternating egg and V-shapes enriching the surface of the concave ovolo in many early cases. The description of ovolo as the fundamental convex quarter-round element underlying or being combined with other elements to compose molding, details on column capitals, and other architectural ornamentation remains in common use, as evidenced by the description by Lewis and Darley (1986) of the ovolo as a "[c]onvex moulding... usually a quarter of a circle in section", which also notes that it is "often enriched with egg and dart or similar ornament". Ovolo adornment by the egg- and-dart element was used on Ionic capitals by ancient Roman and ancient Greek builders (e.g.

The moulding processes of FRP plastics begins by placing the fibre preform on or in the mold. The fibre preform can be dry fibre, or fibre that already contains a measured amount of resin called "prepreg". Dry fibres are "wetted" with resin either by hand or the resin is injected into a closed mold. The part is then cured, leaving the matrix and fibres in the shape created by the mold.

This is a very common process in the aerospace industry because it affords precise control over moulding due to a long, slow cure cycle that is anywhere from one to several hours. This precise control creates the exact laminate geometric forms needed to ensure strength and safety in the aerospace industry, but it is also slow and labour- intensive, meaning costs often confine it to the aerospace industry.

While Powell manufactured stained glass windows, it also provided glass to other stained glass firms. A major product of the factory was decorative quarry glass which was mass-produced by moulding and printing, rather than hand-cutting and painting. This product could be used in church windows as a cheap substitute for stained glass. It was often installed in new churches, to be later replaced by pictorial windows.

Mihrab with polychrome tiles The exceptionally large rectangular mihrab is formed of moulded polychrome tiles. A tiled inscription on the outer cavetto moulding runs up one side, across the top and down the other side of the mihrab. The cuerda seca cavetto tiles have raised white naskh characters which contrast with the cobalt blue background. Running through the shafts of the naskh characters is a second inscription in yellow Kufic characters.

The former Allen Hotel building stands in downtown Pittsfield on the west side of Wendell Avenue Extension, just north of East Street (United States Route 7). It is a five-story steel and masonry structure, its exterior finished in buff yellow brick with marble trim. It is crowned by a flat roof with an extended cornice decorated with modillions and dentil moulding. The front facade is divided into three sections.

Square window holes are cut into each side of the exterior. The bridge is covered by a metal roof. The gable ends of the portals are finished in horizontally laid boards, with partial gable returns and a triangular line of moulding, a nod to Greek Revival architecture popular at the time of its construction. with The bridge was built in 1840 by James Trasker of Claremont, New Hampshire.

Sculptured stones from Kilmartin Glen Sculpture in Scotland includes all visual arts operating in three dimensions in the borders of modern Scotland. Durable sculptural processes traditionally include carving (the removal of material) and modelling (the addition of material), in stone, metal, clay, wood and other materials. In the modern era these were joined by assembly by welding, modelling, moulding and casting. Some installation art can also be considered to be sculpture.

Lust's work has been featured several times in national and international magazines. His metal moulding technique has been praised widely. Design Boom wrote that "Xavier Lust is clearly identifiable through the visible tension he gives to his objects, and the curves influenced by his innovative (de)formation process of metallic surfaces." "A wonderful aspect of Xavier's work is the illusion of lightness and motion," writes the Russian critic Olga Bozhko.

The mansion is built in a restrained Rococo style and consists of three storeys and a high cellar under a black mansard roof. The facade is constructed in limestone ashlars from Lindencrone's estate at Stevns. The main facade on Bredgade is 13 bays long. It has slightly projecting central and corner bays but is brought together by a horizontal moulding along its full length above the ground floor.

The part is removed from the tank and the metal layer carefully separated from the glass substrate. If plating occurs, the process must be begun anew, from the glass mastering phase. The metal part, now called a "father", has the desired data as a series of bumps rather than pits. The injection moulding process works better by flowing around high points rather than into pits on the metal surface.

An experienced machine operator can interpret the report from the analysis system and optimise the moulding process to make a disc that meets the required Rainbow Book specification (e.g. Red Book for Audio from the Rainbow Books series). If no defects are found, the CD continues to printing so a label can be screen or offset printed on the top surface of the disc. Thereafter, discs are counted, packaged, and shipped.

He trained to become an electrical engineer through attending night school for five years. His first employer in 1929 was Harry Urlwin, who instilled in him the sense of never to be frightened of anything or anyone. In 1935, Urlwin sent him to England for the purpose of learning about plastics. He imported a moulding machine to New Zealand and was the first to manufacture the material in the country.

At Ulster University she focuses on aerospace composites and sustainable plastic manufacture. Using injection moulding, thermoforming and additive manufacture Harkin-Jones is exploring advanced thermoplastic composite materials for medical devices and aerospace. She has published over 200 peer reviewed papers, and secured funding over £12 million. She is a member of the Royal Academy of Engineering Higher Education committee and Deputy Chair of the Northern Ireland Higher Education Authority.

Pata de mulo cheese is a type of cheese made from ewe's milk in the Tierra de Campos comarca of Castilla y León, Spain. It originated as the aged version of the Villalón cheese, a fresh cheese made in Villalón de Campos, Valladolid. Due to its elongated shape it became known as pata de mulo, literally "mule's leg". This shape was achieved by moulding the cheese by hand in a cheesecloth.

The windows on the projecting section are three-part rounded windows, each with distinctive and elaborate hoods. The building corners are quoined, and the roofline features dentil moulding and paired brackets. A series of smaller ells project to the right of the main block, and there is a small single story addition to the rear. The main block is topped by an octagonal cupola with round-arch windows.

For both Marx and Hegel, self-development begins with an experience of internal alienation stemming from this recognition, followed by a realisation that the actual self, as a subjective agent, renders its potential counterpart an object to be apprehended. Marx further argues that by moulding natureSee also Lefever DM; Lefever JT (1977). "Marxian alienation and economic organisation: An alternate view". The American Economist(21)2, pp. 40–48.

2008 brought the arrival of an entire new face- lift of the interior, with insulation added and the painting of the ornate moulding inside the church. Most recently, all of the stained glass windows in the church were removed and subsequently cleaned and put back together in 2015, using new lead framing. A new handicap accessible restroom was also added in 2015, requiring the confessional to be relocated.

The outer arches is emphasised by a flat hood moulding. Each bay is covered with a cross-vault which reaches a height of approximately 4m. [..] The upper floor is reached by an external staircase on the east side leading to a walled terrace above the arcade. [..] The identity or function of this building is not known although its design and orientation indicate that it may be a mosque.

The hull is built from glass-reinforced plastic foam sandwich and the spars from aluminium. The hull has been made in a range of colours but so far the deck moulding and hull below waterline have always been Vela Grey. The most common topsides are Purple, Navy Blue and Race Blue, but examples of Yellow, Charcoal Grey and Vela Grey (generally known as 'White') boats can also be found.

Algernon Sidney is one of the namesakes for Hampden–Sydney College in Virginia. The College formerly used the original spelling of Sidney. He was chosen because of the role his ideas played in moulding the beliefs of the American Revolutionary thinkers. Sidney became widely used as a given name in the United States after the American Revolution due to admiration for Algernon Sidney as a martyr to royal tyranny.

George Wilder "Dim" Batterson (October 3, 1881 – December 3, 1935) was an American football coach for high school, college and professional teams. Batterson's ability to turn out players of All-American ability and knack of moulding Harvard Cup championship eleven at Masten Park high school in Buffalo, New York earned him the distinction of being one of the most astute scholastic coach in western New York state history.

Charles Wesley was the eighteenth child of Susanna Wesley and Samuel Wesley. He was born in Epworth, Lincolnshire, England, where his father was rector. He was educated at Westminster School and Christ Church, Oxford, where he was ordained. At Oxford, Charles formed a prayer group among his fellow students in 1727; his elder brother, John, joined in 1729, soon becoming its leader and moulding it in line with his own convictions.

Oscar Nemon's seated statue of Sigmund Freud in Hampstead was cast there and installed in 1971. In 1984, it was owned by listed company William Morris Fine Arts.1984 Annual Report, William Morris Fine Arts plc Since 2001, the company has been based in Lasham, Hampshire. To this day, the foundry has expertise in a range of services, including bronze casting, lost wax casting, moulding, patination and many more.

260x260px The Adirondack chair is an outdoor lounge chair with wide armrests, a tall slatted back, and a seat that is higher in the front than the back. It is named after the Adirondack Mountains. The original design featured a small number of flat wooden boards, with the seat support combined with the rear legs. Adirondack chairs are now often made by injection moulding and can take any form.

It is oriented with its main facade facing roughly south, and a secondary side elevation toward the road. The main facade is five bays wide, with a center entrance. The entry is flanked by unusual sidelight windows which include a sliding sash, with pilasters outside rising to an entablature. Windows are set in rectangular openings with delicate Federal moulding, the second-story windows smaller than those on the first floor.

The King's England series, NORFOLK, by Arthur Mee, Pub: Hodder and Stoughton, 1972, page 323/324, Walsoken, To the base of the tower is the rounded Norman west doorway. The interior of the church has massive Norman arcades which are rich with zigzag moulding decoration. An arch in the chancel is supported on carved banded shafts. On one side is the 15th-century doorway to the old rood loft.

Their traditional occupations were in agriculture, growing produce such as barley, wheat, and legumes as well as breeding cattle, oxen and asses. There were traditional handicrafts including weaving which was mostly done by the men. The women worked on moulding earthenware crockery. Большая Советская Энциклопедия The Yaghnobi people originated from the Sogdians, a people dominant in the area until the Muslim conquests in the 8th century when Sogdiana was defeated.

A marble stringcourse separates the two floors, and the roof cornice is adorned with dentil moulding. The center three bays project slightly, and are topped by a pedimented gable with a half-round window at its center. The main entrance is in the center bay, set in a round-arch opening flanked by paired engaged Ionic columns. The Academy was designed by local designer-builder James Nutter and built in 1809.

Paradoxurus species have a broad head, a narrow muzzle with a large rhinarium that is deeply sulcate in the middle. Their large ears are rounded at the tip, the interior ridges and bursae are well developed. The skull exhibits marked muscular moulding, and the postorbital area is deeply constricted shortly behind the well-developed postorbital processes. It is considerably narrower than the interorbital area and than the muzzle above the canines.

A century later, in 1633, the chapel must have been redone in the form we see today. The date is inscribed at the base of an image of Our Lady. Almost all the architectural moulding, especially the shafts and pinnacles, seems to be early 17th century. The rotunda's entrance nevertheless seems to be from the middle of the previous century, dating perhaps to when the original chapel was founded.

He made Astrakhan the centre of military efforts against Persia, and waged the first full-scale war against them in 1722–23. Peter reorganized his government based on the latest political models of the time, moulding Russia into an absolutist state. He replaced the old boyar Duma (council of nobles) with a nine-member Senate, in effect a supreme council of state. The countryside was divided into new provinces and districts.

Yet, this portal displays only two rosettes that can be related to the sun and possibly the cross as a symbol of Jesus Christ, which actually is also connected to the sun. The other symbols are rather linked to the other celestial body, i.e., the Moon. The relief moulding rope seems to indicate the presence of the snake, which, like other monsters in ancient legends, protects the sacred room.

The portal is stepped forward from the facade and has a triangular gable decorated with a pentagram. The opening is composed of a series of Gothic archivolts; the inner moulding is decorated with an arcade relief of Mudéjar (Islamic influenced) design. Inner view of the Church of São Francisco, towards the main chapel. The church has a nave with three aisles, with the central aisle being the highest.

Other aspect to take in consideration is the position of the seed in open bags. It is important to sow it in a flat shape because that assures that the radicle is going to contact the substratum rapidly. When we sow in obscurity, once germinated, it is advisable to replant rapidly to avoid physiological problems such as moulding. The seedlings of this species present a high percentage of survival after replanting.

However the boards hanging in this church were not located by him and they survive. The parish registers begin in 1562. A monument to Samuel Griffiths who died in 1796 is by E. Spencer of Chester, and a memorial to Baskervyle Glegg, who died in 1843, is by Sanders of London. The two-manual organ is by Franklin Lloyd, to which additions were made by Harry Moulding of Chester around 1970.

The name Mumbi comes from the Bantu root verb "BA", the same root word that gives rise to "UMBA". The prefix "Mu" is the Bantu noun classifier for nouns that have souls, like humans.The verb UMBA indicates the action of moulding, shaping, designing or creating. The suffix "i" replaces the terminal "a" in the Bantu language noun or verb to create the name for the performer of the action.

The building is rendered and painted stone and brick with a corrugated iron roof, which is multi hipped and has three chimneys. A projecting wing has two protruding timber framed sash windows at each level; windows have decorative sills and moulding with a prominent timbered gable with timber infill. Both levels have verandahs with timber balustrading. The building was home to William Finlay, the first mayor of Albany.

Many toys and hobby items are made from polycarbonate parts, like fins, gyro mounts, and flybar locks in radio-controlled helicopters, and transparent LEGO (ABS is used for opaque pieces). Standard polycarbonate resins are not suitable for long term exposure to UV radiation. To overcome this the primary resin can have UV stabilisers added. These grades are sold as UV stabilized polycarbonate to injection moulding and extrusion companies.

221-41 (Society's pdf), at pp. 223-26. The ashlar cladding of the western piers, sufficiently preserved at the base for identification as of Norman-Early English Transitional style, show a curved plain facing on the west side over a basal plain roll moulding, with slender engaged shafts at the angles with the plain north and south faces.R. Carr, "Blythburgh Priory Interim Report, July to August 2010", Blythburghpriory.co.

The GT, a 2+2 two-door coupé was the company's first car and was made between 1959 and 1967. The GT Mk 1 was initially available with either 948 cc BMC A-Series engine with an optional Shorrock supercharger or Coventry Climax 1098 cc engines. The chassis was fabricated from square steel tubing and the front suspension was initially from the Austin A35. The body was a one-piece moulding.

South Auchenmade moss These tileworks was built in 1831 at North Fergushill farm and consisted of a moulding room, kiln and drying stores. The tileworks were in a field just to the east of an unclassified road between North Fergushill farm and the old Dalry to Kilmarnock railway line. The first manager of the Tilework appears to be a Hugh Bunton or Buntine. Bunton probably lived at the adjacent Tilework Cottage.

In 1829 or the early 1830s Millar designed a medium 32-pounder of 8 feet and 48–50 cwt. According to some he designed the 32 pdr of 8 feet and 48 cwt, it having only two muzzle moulding rings. In 1865 the War Department noted that it had three patterns of 48 cwt, and two of 50 cwt. The name of Sir Alexander Dickson was also attached to these guns.

5"Adobe Moulding" Auroville Earth Institute This was assimilated into the Old Spanish language as adobe , probably via Mozarabic. English borrowed the word from Spanish in the early 18th century, still referring to mudbrick construction. In more modern English usage, the term "adobe" has come to include a style of architecture popular in the desert climates of North America, especially in New Mexico, regardless of the construction method.

Alferaki Palace is a museum in Taganrog, Russia, originally the home of the wealthy merchant Nikolay Alferaki. It was built in 1848 by the architect Andrei Stackenschneider on Frunze Street (formerly Katolicheskaya), in downtown Taganrog. The building is decorated with a portal featuring four Corinthian columns and stucco moulding in the baroque style. A suite of rooms was created inside, along with a spacious music hall with a ceiling-painting.

Byte Size Coaching was created to help community clubs and soccer associations reach all their coaches. Waiters continues to coach children and young adults, helping them pursue their soccer goals and moulding players for the future. He was appointed the first Director of the National Soccer Coaches Association of America's (NSCAA) Goalkeeping Institute, stepping down in 2006. He remains a National Staff Coach of the NSCAA and U.S. Soccer.

Some legends say that Tāne made the first man, named Tiki. More widely known is a tradition that Tāne was trying to find himself a wife, but at first he found only non- human females and fathered insects, birds, and plants. One such was Rangahore, who gave birth to a stone and was abandoned by Tāne. Then he made a woman by moulding her from the soil (Orbell 1998:145).

Winter, Nancy A., "Monumentalization of the Etruscan Round Moulding in Sixth Century BCE Central Italy", pp. 61–67, in Monumentality in Etruscan and Early Roman Architecture: Ideology and Innovation, edited by Michael Thomas, Gretchen E. Meyers, 2012, University of Texas Press, , 9780292749825, google books; Example in the reconstructed Etruscan temple at Villa Giulia Additional more-obscure varieties of cornice include the architrave cornice, bracketed cornice, and modillion cornice.

Because of recording logistics, Prince and Moulding were forced to play around the beat. The guitar solo was played by Dave Gregory on Eric Clapton's psychedelic Gibson SG The Fool, then owned by Rundgren. Gregory spent hours rehearsing the solo. Years after the fact, he realised that he had subconsciously lifted the "little five-note runs" heard in the trumpet line of "Magic Dragon Theatre" from the Utopia's Ra (1977).

Temple architecture is a synthesis of engineering and decorative arts. The decorative elements of the Kerala temples are of three types – mouldings, sculptures and painting. The moulding is typically seen in the plinth where in horizontal hands of circular and rectangular projections and recesses in varying proportions help to emphasize the form of the adisthana. Occasionally this plinth is raised over a secondary platform – upapeedam – with similar treatment.

It has a particularly elaborate Greek Revival front entry surround, with sidelight windows and fluted moulding. The main block is joined to a 19th-century barn by a series of smaller ells. The house was built in 1843, and is one of a cluster of locally significant plank- frame houses. This house belonged to Walter Nelson, who was the first to identify and document Goshen's numerous plank-framed houses.

Airfix was founded in 1939 by a Hungarian businessman Nicholas Kove, initially to manufacture inflatable rubber toys. The brand name was selected to be the first alphabetically in trade directories. In 1947 Airfix introduced injection moulding, initially producing pocket combs. In 1949 the company was commissioned to create a promotional model of a Ferguson TE20 tractor, moulded in cellulose acetate plastic and hand-assembled for distribution to Ferguson sales representatives.

The plinth is a diminishing panelled block with a heavy moulding above. Inscriptions on the four panels of the plinth read: THOMAS JOSEPH BYRNES MLA for Warwick, 1896-98 (east face), Born Brisbane 1860 (north face), Premier of Queensland 1898 (west face), and Died 1898 (south face). At the base of the east face of the plinth is the inscription: Andrews Bros Sydney. The dado forms the shaft of the pedestal.

In plan form they resemble early nave piers of the Norman period. The engaged colonettes enframe a rectangular moulding with a central circle. This decorative element was commonly used in early Italian renaissance architecture as well as subsequent adaptations. The small circular reliefs used in the upper section of the pier are most unusual and may be simplified version of the patera, commonly used motifs in the Adam style.

A Gandhian theology of liberation. Gujarat Sahitya Prakash: Ananda India, 1987, pp 236-237. The purpose of the state is that it is an instrument of serving the people. But Gandhi feared that in the name of moulding the state into a suitable instrument of serving people, the state would abrogate the rights of the citizens and arrogate to itself the role of grand protector and demand abject acquiescence from them.

The woofer's diaphragm, weighing 3.7 g, is manufactured from a flat sheet of pressed pulp paper. Unconventionally, it is formed into conical shape not through moulding or pressure, but by curling and then gluing the two ends together. Against the black finish of the cabinet, the white bass/mid driver cone is a distinctive and iconic feature of the product. The network is second-order passive, crossing over at 2 kHz.

The side aisle rafters also have arched bracing members in keeping with the truss bracing. The wide, gently pointed chancel arch springs from a timber moulding that runs around the sanctuary, forming a sill to the eastern windows. Walls throughout the interior are lined with vertical, v-j pine boards that have been painted white. Aisle posts are painted in a dark brown and the timber pews are unpainted.

The doors and windows have mouldings, and a stepped dado moulding decorates the north and south walls. The Great Hall contains a number of memorial plaques, and WWI and WWII honour rolls. This impressive primary building of the Grammar School group remains substantially intact in form and detail, retaining its well-crafted features, in particular the upper level classroom and Great Hall interiors, and the Oamaru stone porch.

The building was designed in the Classical Revival style, in 1913 by architect James Knox Taylor. The single-story building features a broad curving facade with eight fluted Doric columns of Vermont marble, flanked by wide piers. The interior lobby space retains many original features, including terrazzo and marble flooring, and a coffered ceiling with decorative moulding. The building was added to the National Register of Historic Places in 1971.

The interior retains a number of original Federal period finishes, including doors with original hardware, and several delicately carved fireplace surrounds. A two-story ell extends to the rear; it has less ornate original finishes, which include crown moulding and four-panel doors. The ell is further extended by a 20th-century garage. The main block of this multi-section house was built in 1813 by Austin Tyler.

The place has potential to yield information that will contribute to an understanding of the cultural or natural history of New South Wales. Linnwood and its surrounding landscape is evidence of the use and moulding of the landscape to create a country estate. The site provides evidence of this pattern of land use in the local area. McCredie Cottage and Faulds House are evidence of purpose designed welfare dwellings.

Elaborate stucco (plaster) reliefs decorating the Chateau de Fontainebleau were hugely influential in Northern Mannerism. There is a plaster low-relief decorative frieze above. Gypsum Plaster/Powder is a building material used for the protective or decorative coating of walls and ceilings and for moulding and casting decorative elements.Plaster. In: In English "plaster"/Powder usually means a material used for the interiors of buildings, while "render" commonly refers to external applications.

The alfiz (, , perhaps from Andalusian Arabic alḥíz, from alḥáyyiz, from Classical Arabic ḥayyiz, meaning 'a container';Alfiz: "DRAE. Diccionario de la Lengua Española. Vigésima segunda edición", Espasa Calpe, S.A, 2003 ) is an architectonic adornment, consisting of a moulding, usually a rectangular panel, which encloses the outward side of an arch. It is an architectonic ornament of Etruscan origin, used in Visigothic, Asturian, Moorish, Mozarabic, Mudéjar and Isabelline Gothic architecture.

To avoid paying for a coach he would walk in the rain, and then sit in wet clothes to save the cost of a fire to dry them. His house was full of expensive furniture but also moulding food. He would eat putrefied game before allowing new food to be bought. On one occasion it was said that he ate a moorhen that a rat had pulled from a river.

In the UK, this was the Green Kremer Powertrack car which was identical to the US light blue/orange car. However, despite its popularity it was an inferior moulding and short on 'wow' factor. Curiously, it is the only Powertrack/Speedtrack car to have a front axle with spacer bushes on it. This suggests it was a very early Matchbox prototype that could just about pass for production.

United States' Kevin Kim took the singles in 2007 over Bobby ReynoldsAmerican player Sam Querrey won his first Challenger in Yuba City in 2006The Sunset Moulding YCRC Challenger was a professional tennis tournament played on outdoor hard courts. It was part of the Association of Tennis Professionals (ATP) Challenger Tour. It was held annually at the Yuba City Racquet & Health Club in Yuba City, California, United States, from 2005 to 2009.

Dax Cars is a British sports car manufacturer founded in 1968 and based in North Weald, Essex, England. Dax started as a fibreglass moulding company, named DJ Sportscars Int. and became first British company to make a kit based replica of the AC 427 Cobra.. On 15 August 2017, John Kox acquired the production of the Dax 427 from 427 Motor Company (formerly known as Dax Cars & DJ Sportscars Int.).

The porch is supported by round Tuscan columns and has dentil moulding at the eave. The mansard roof dormers are topped by segmented arches and have scrollwork framing around their windows. Stylistically sympathetic ells extend to the side and rear of the main block, which exhibits high quality craftsmanship both outside and inside. The house was built about 1865, and is one a few well preserved Second Empire residence in Stoneham.

During the first band rehearsal, Partridge recalled, "He sounded like Jon Lord from Deep Purple; fuzz box, wah wah pedal, bluesy runs. I said, You don't have to play like that, you can play like us if you want. The next rehearsal, he was like a maniac, like if Miró had played electric organ. Fantastic." December 1976 officially marked the beginning of the Partridge–Moulding–Chambers–Andrews line-up.

After receiving a £5,000 advance from a skeptical Virgin Records, the group devoted two weeks to the sessions. Calling themselves "the Dukes of Stratosphear", the spin-off group consisted of Partridge and Moulding with Dave and his drummer brother Ian. Each adopted a pseudonym: Sir John Johns, The Red Curtain, Lord Cornelius Plum and E.I.E.I. Owen. At the sessions, the band dressed themselves in Paisley outfits and lit scented candles.

The lyrics are about "if there was a Jesus, if there was a Buddha, if there was a whatever great holy leader you'd like to name, there's nothing supernatural about them. They are merely men." It contains a reference to Jimmy Swaggart in the lyric. "Cynical Days" was described by a CMJ New Music Monthly reviewer as Moulding "finding his symmetrical vocal/bass compositional counterpart recalling Mummers more disjointed approach".

As it moved, it scooped up a pipe and deposited it in the rear of the waiting truck which supplied the power. It continued in the same movement while the power was applied. The pipes were 14mm-diameter wide white plastic tubular moulding, in 10mm lengths. These were held on edge in a narrow sloping trough, molded into the base, presenting their open side ready for the crane to engage.

Processing PTFE can be difficult and expensive, because the high melting temperature, , is above the initial decomposition temperature, . Even when melted, PTFE does not flow, but instead behaves as a gel due to the absence of crystalline phase and high melt viscosity. Some PTFE parts are made by cold-moulding, a form of compression molding. Here, fine powdered PTFE is forced into a mould under high pressure (10–100 MPa).

Church interior The furnishings were largely replaced in 1863-64 although the base of a rood screen dating from around the fifteenth century has survived. The granite font dates from the twelfth century. It has a lead lined round bowl which stands on a shaft carved with cable moulding on a round base. A memorial stone to John Mably who died in 1687 is in the south porch.

The interior follows a Georgian central hall plan, with parlors on either side in the front, and a library and dining room to the rear. The original kitchen was located in an ell extending to the rear. The interior woodwork is mainly from the late 1820s, and is of high quality. The parlors feature particularly elaborate woodwork, with a pilastered fireplace mantel, and ropework and dentil moulding in the cornices.

The main entrance is at the center, flanked by sidelight windows and topped by an entablature and granite lintel. Windows are set in rectangular openings, with granite sills, and granite lintels on the first floor windows. The street-facing east facade has a pedimented brick gable with a deep recess at the center and ogee crown moulding along the rake edge. The house was built by Charles Graham about 1836.

The entrance has a transom window, and is flanked by pilasters which rise to a frieze and cornice. The second story has a slight overhang above the first floor, and the gable ends on the sides have a similar overhang as well. The main roof cornice has a line of dentil moulding. The house had a stone chimney at its center, With which is no longer visible above the roof line.

At the end of 1876 he arrived in India where all of his service of 35 years was passed in the Punjab. Douie became Chief Secretary to the government of the Punjab in 1900, and "had a large share in moulding the famous Land Alienation Act". He became Settlement Commissioner in 1903 and Financial Commissioner in 1909. He officiated as Lieutenant Governor of the Punjab from April to August 1911.

UV attack by sunlight can be ameliorated or prevented by adding anti-UV polymer stabilizers, usually prior to shaping the product by injection moulding. UV stabilizers in plastics usually act by absorbing the UV radiation preferentially, and dissipating the energy as low-level heat. The chemicals used are similar to those in sunscreen products, which protect skin from UV attack. They are used frequently in plastics, including cosmetics and films.

The main entrance has double doors with bolection moulding and is surrounded by a frame with a rope design. The entrance leads to a small vestibule. Unusual for an Italianate design, the main roof of the house is steeply pitched; a flat roof was more common for the style. This was purportedly done to bear the heavy snows that the house experienced along the shore of Lake Michigan in winter.

The Ephraim Cutter House stands on a side street in Arlington Center, on the west side of Water Street just behind the commercial buildings facing Massachusetts Avenue. It is a two-story wood frame structure, with a dormered hip roof and clapboarded exterior. Its windows are rectangular sash, topped by delicate eared moulding. The main entrance is at the center of the five-bay front facade, sheltered by a gabled porch.

The lining materials of the cathedral are hewn sandstone blocks, originating from the stone quarries to the north from the historical core. The masonry is encircled by a plinth around the whole perimeter and ends with a moulding in the upper part. The western frontage was originally established as a two-tower one. The towers were supposed to be supported by vigorous pillars, reaching up to the cornices of both towers.

Windows on the upper levels are sash, set in rectangular openings with granite lintels and sills. There is a modest brickwork cornice, laid to resemble dentil moulding, below the roofline. The block was built in 1853 by Samuel Rankin, a descendant of one of the area's first European settlers. Its location was near the center of the city's shipbuilding industries, and replaced an earlier commercial building destroyed by fire.

The fully pedimented gable is decorated with modillions and dentil moulding, the latter of which is also found at the roof line. The porch is flanked by two- story projecting bays, and there are gable-roof dormers projecting from the roof on several sides. The rear of the building has full-width porches on all three levels. Most of the building's windows have been modernized, with three- pane sliding windows typical.

A small () gap is required between the flooring and any immovable object such as walls, this allows the flooring to expand without being obstructed. Baseboards (skirting boards) can be removed and then reinstalled after laying of the flooring is complete for a neater finish, or the baseboard can be left in place with the flooring butted into it, then small beading trims such as shoe moulding or the larger quarter- round moulding can be fitted to the bottoms of the baseboards. Saw cuts on the planks are usually required at edges and around cupboard and door entrances, but professional installers typically use door jamb undercut saws to cut out a space to a height that allows the flooring to go under the door jamb & casing for a cleaner look. Improper installation can result in peaking, in which adjacent boards form a V shape projecting from the floor, or gaps, in which two adjacent boards are separated from each other.

In 1930, Gandhi wrote, "Such was the man who captivated my heart in religious matters as no other man ever has till now." 'I have said elsewhere that in moulding my inner life Tolstoy and Ruskin vied with Kavi. But Kavi's influence was undoubtedly deeper if only because I had come in closest personal touch with him.' Gandhi, in his autobiography, called Rajchandra his "guide and helper" and his "refuge [...] in moments of spiritual crisis".

Continuous strands of fibreglass are pushed through a hand-held gun that both chops the strands and combines them with a catalysed resin such as polyester. The impregnated chopped glass is shot onto the mould surface in whatever thickness and design the human operator thinks is appropriate. This process is good for large production runs at economical cost, but produces geometric shapes with less strength than other moulding processes and has poor dimensional tolerance.

Fibre fabrics are web-form fabric reinforcing material that has both warp and weft directions. Fibre mats are web-form non-woven mats of glass fibres. Mats are manufactured in cut dimensions with chopped fibres, or in continuous mats using continuous fibres. Chopped fibre glass is used in processes where lengths of glass threads are cut between 3 and 26 mm, threads are then used in plastics most commonly intended for moulding processes.

Members gave lectures to other societies as well, such as the Amis de l'humanité,La Révolution française et l'abolition de l'esclavage (1968) 8, p. 86. and the Société des Amis de la Constitution.La Révolution française et l'abolition de l'esclavage (1968) 8, p. 173. It was a reflection of not only the "Philosophe upbringing" of the Society members, but also of their efforts to be active participants in the moulding of the revolutionary government.

The latter rarely appear on Queensland war memorials. Within a rich moulding of laurel leaves in the upper left hand corner is an oval-shaped metal plaque depicting in bas relief a cavalry charge and infantry soldiers advancing in battle, intended to illustrate the different fighting units in action. A carved scroll unfolds from the plaque and bears the relief lettering Roll of Honour. The whole board is set into a simple frame.

2010 Lexus ES 350 (GSV40; US) In 2009, the 2010 model year ES underwent a mid-cycle facelift. A slightly revised grille resembled that of the new HS 250h, and the lower bumper and taillights were changed. Other exterior changes included chrome-trimmed side moulding, turn signal indicators on the side mirrors, and new split 5-spoke alloy wheels. Memory seating, rain-sensing windshield wipers, and rear seat-mounted side- impact airbags were now standard.

1978 granite panels, flanking a central entrance; these features are a replacement for a historic plate glass commercial storefront with recessed entrance. The upper levels are faced in rusticated granite, with second-floor windows set in rectangular openings, and third-floor windows in the outer bays set in round-arch openings. The main roof cornice projects, with supporting modillions and a band of dentil moulding. The building's side walls are finished in brick.

The four reserves on the boss of the dish each contain a classical god, together with elements. The reserves around the rim show Minerva presiding over the seven liberal arts: astronomy, geometry, arithmetic, music, rhetoric, dialectic and grammar, each with relevant attribute. The rim of the salver has an ovolo moulding. The remainder of the surface is decorated with gilt renaissance strapwork and foliate motifs in relief against a rigid silver ground.

Pottery is one of the oldest trades in Africa and the world. With increasingly developed tools and technology, the craftsman is able to create a variety of beautiful yet useful objects of unique design. It is hardly a surprise that today, with the introduction of modern equipment and thanks to new cooking, colouring, and moulding techniques, the ceramic crafts are a total success that highlights the know-how and creative genius that existed already.

170 The principal façade of the sabil is its western side, with the fountain contained within a large shallow niche framed with cyma reversa moulding. The fountain is surrounded by four white flat marble columns set against a background of red marble. Above the two central columns is a plaque commemorating the construction of the sabil in 1236 H (1820-1821 CE). On either side of the sabil are windows which look into the tombs.

In Brighton and Hove, only Hove's central library (1907–08, by Leeds architects Percy Robinson and W. Alban Jones) remains with little alteration. The "highly inventive" Edwardian Baroque design features a domed upper storey and a rotunda at the rear. The façade has egg-and-dart moulding. Brighton's central library used to be in the early-19th-century complex of buildings designed by William Porden, which later became Brighton Museum & Art Gallery.

At the rear of the building, there is a 3-storey 3-bay pent-roofed extension which houses a square clock tower. The tower itself is crowned with an ogee roofed open cupola and timber columns. The schoolroom block of the main building is 2 storeys tall and has a 3 bay front. The windows are once again 12 pane sashes with differences in size and moulding between the first and second floors.

1320) are entombed within the church, and are its oldest inhabitants. Their effigies now lie beneath an arch moulding set into the wall in the Molyneux chapel, which is outside of the 14th-century church walls. In 1436 the office of Hereditary Steward of the Wapentake of Salfordshire was granted to Sir Robert Molyneux of Sefton. The office was held by Sir Robert's successors (descendants of his brother Richard), the Earls of Sefton until 1972.

In 2007, she told the Guardian, "We stay up late and work together. I'll be busy painting and moulding the tiny parts, he'll be fixing a circuit." On the wall outside, there was a statue of Bom-Bane, built by her brother-in-law, John Jostins, who worked on the R2-D2 from The Empire Strikes Back. During the night of 1 December 2012, thieves stole the statue from the wall of the restaurant.

In 2007 it manufactured a scale model of the Jungfrau Railway, Europe's highest railway, and received an order for 2000 sets, which will be sold at the stations of the railway. The models are made by the injection moulding process. The museum is included in the attractions covered by the Pune Municipal Corporation's one-day city tour bus. The road on which the museum is located has been named after Bhau Joshi .

The cathedral was built by Jamieson and Sons who built many other major ecclesiastical and municipal buildings in New Zealand. Petre had previous experience in using concrete, designing dock walls and sewers as a draughtsman. This knowledge allowed Petre to require innovative methods during construction such as pouring heart walls with concrete and then facing with stone. Mass-produced components were widely used, including curved arches made in a purpose built moulding machine.

A slightly projecting square tower rises from the center of the seven-bay main section, also capped by a mansard roof. Windows in both the main and tower roof are framed by scrolled moulding and topped by gabled pediments. Some iron cresting survives at the top of the tower. The interior of the building retains a number of features original to its construction, including an elevator, fireproof vaults, and a speaking tube.

Saülo Mercader started modelling and drawing when he was six- years old. He learnt the different techniques of modelling in the « Fallas » workshops in Alicante. He was an apprentice in the sculptor Serrano's workshops which allowsed him to master the different steps in the making of bronze sculptures : from moulding to different processes of casting. In 1964 he arrived in Bilbao (The Basque country in the North of Spain) where his artistic career started.

12.. In a truly plastic process, the artist reconfigures, reworks and "sculpts" the chosen volume using traditional techniques (such as modelling, moulding or assemblage) in order to accomplish the incorporation of space and presence into the work. To this end, a "plinth" can be posed in reverse on another one identical to it, or on its negative (its own mould), or even turned inside out like a glove with the armature on the outside.

One of the earliest and best constructed of the churches, St. Mary's or Our Lady's Church consists of a nave with a later chancel. Its granite west doorway with an architrave, has inclined jambs and a massive lintel. The underside of the lintel is inscribed with an unusual saltire or x-shaped cross. The East window is round-headed, with a hood moulding and two very worn carved heads on the outside.

Transfer molding (BrE moulding) is a manufacturing process in which casting material is forced into a mold. Transfer molding is different from compression molding in that the mold is enclosed [Hayward] rather than open to the fill plunger resulting in higher dimensional tolerances and less environmental impact. Compared to injection molding, transfer molding uses higher pressures to uniformly fill the mold cavity. This allows thicker reinforcing fiber matrices to be more completely saturated by resin.

The roof line of the original porch may be seen over the early door on the inside of the present south door, and is supported by a chamfered arch rib. The outer door to the first porch, now the inner one of the existing porch, is of two chamfered orders that continue to the ground, with a hood- moulding springing from carved terminals. Several courses remain of the diagonal buttresses which originally flanked this door.

Beneath and attached to the ogee head are three grotesque bosses—a probable fourth is missing—as stops to the foiled moulding. The nave south wall is surmounted by a plain parapet holding projecting gargoyles. It contains two windows, each of four lights—one Decorated, the other with Perpendicular tracery—and both with hood moulds. Two small 15th-century windows sit beneath the easterly window, one of two lights, the other single.

During the war years and into the emerging jet age, Fireproof Tanks Ltd developed new technologies in rubber formulation, moulding and sheet production in order to remain a leader in other specialist markets such as the creation of hovercraft skirts. Working with Saunders Roe at Cowes on the Isle of Wight, the company became so important to the hovercraft industry that the now renamed FPT Industries was bought by the British Hovercraft Corporation in 1966.

It is also resistant to most chemicals, except ketones and esters. It is available as a film in a variety of colors and formulations for various end uses, and as a resin for specialty coatings. It has insufficient thermal stability for injection moulding and thus it is usually available commercially as a film product. PVF is also used as whiteboard surface material and has recently been used as part of the Phoenix Mars Lander's biobarrier.

Pressureless sintering is the sintering of a powder compact (sometimes at very high temperatures, depending on the powder) without applied pressure. This avoids density variations in the final component, which occurs with more traditional hot pressing methods. The powder compact (if a ceramic) can be created by slip casting, injection moulding, and cold isostatic pressing. After pre-sintering, the final green compact can be machined to its final shape before being sintered.

The Old Randolph County Courthouse is a historic former county courthouse at Broadway and Vance Street in the center of Pocahontas, Arkansas. It is a two- story Italianate Victorian brick structure, built in 1872, regionally distinctive for its architectural style. It has brick quoined corners, and a low hip roof with small central gables on each elevation, and a square cupola with flared roof. Its eaves are studded with paired brackets and dentil moulding.

The capital of the east pier has an additional line of floriate detailing, reminiscent of crocketing. The south Early English Decorated style early 13th-century arcade of three bays sits on octagonal piers with octagonal capitals with horizontal moulding. All capitals have been recarved. The north aisle of the nave has at its east end, where it meets the north chancel chapel, a multi-facetted moulded arch with rounded half piers and part-octagonal capitals.

For the total number of gods and goddesses, see Ridgway, Brunilde Sismondo 2000, p. 54 n. 35. The names and positions of most Giants remain uncertain. Some of the names of the Giants have been determined by inscription,The names of the Giants were inscribed on the lower molding or, for the walls flanking the stairs where the moulding was omitted, on the background of the frieze between the figures, see Brunilde Sismondo 2000, p.

Eremophila homoplastica was first formally described in 1899 by Spencer Le Marchant Moore who gave it the name Pholidia homoplastica. The description was published in Journal of the Linnean Society, Botany. In 1931, Charles Gardner changed its name to Eremophila homoplastica. The specific epithet (homoplastica) is derived from the ancient Greek homo- meaning "alike" and plasticos meaning "fit for moulding", possibly alluding to the similarity of habit and leaf form to E. gibbifolia.

The Somerset Cricket Board (SCB) is the governing body for all recreational cricket in the historic county of Somerset, and was established in 1994 under its first Cricket Development Officer Andrew Moulding. Following a restructuring in January 2010, the SCB now operates as a limited company. The current SCB Chairman is Andy Curtis, and the Cricket Development Manager is Andy Fairbairn. The Somerset Cricket Board competed in the MCCA Knockout Trophy between 1998 and 2002.

The two-story wood-framed house was built in 1923 for Alfred Richards, a bank executive. It is one of the last house built in the Wollaston Heights area, which had been mostly built out in the earlier decades of the 20th century. Designed by William Chapman, it has a five-bay main facade with three gabled dormers above, each with a round-arch window. The eave is decorated with dentil moulding and modillions.

The architectural quality of Gloucester Building, although still significant and sympathetic, has been reduced by the demolition of the Little Essex Street block. A striking feature about the design of this building is extensive structural use of reinforced concrete, and the use of cement in moulding details such as skirtings and cornices. This would appear to be an early example of the use of this technology. Style: Edwardian / Australian Federation; Storeys: Three; Roof Cladding: Iron.

On one of the south purlins: > I.T. I.L. C.W. 1783 On the collar of the east truss is carved the commemoration: > John Waldron and John Painter Chappel Wardens 1717 and 18. John Flux > Painter. The present roof was built in 1638 and this is recorded by a carving in the North side wood moulding: > W.T. T.W. H.N. Carpenters (with a fleur de lys between each initial) > continuing: Blanchadin Wake: John Waldron Church Wardens 1638.

Since Partridge recently gave away his acoustic guitar during an appearance on Multi-Coloured Swap Shop, he bought a new one for the record. He also convinced Chambers to buy a new assortment of drums and a timbale. Music critic Chris Woodstra wrote that Gregory, Partridge and Moulding's new instruments, plus Chambers' new drum synthesiser, "set the tone" for the record. Moulding also used his Fender Precision Bass on a few tracks.

The Edmund Fowle House is located northeast of Watertown Square, on the south side of Marshall Street between Spring and Mount Auburn Streets. It is a two-story wood-frame structure, with a hip roof, central chimney, and clapboarded exterior. It has a five-bay front facade, with a center entrance sheltered by a projecting enclosed flat-roofed vestibule. The vestibule entry is flanked by sidelight windows and framed by fluted moulding.

It is possible to combine these two steps, so-called in-situ, foam-in-fabric or direct moulding. A complete, fully assembled seat cover is placed in the mold and held in place by vacuum drawn through small holes in the mold. Sometimes a thin pliable plastic film backing on the fabric is used to help the vacuum work more effectively. The metal seat frame is placed into the mold and the mold closed.

The original rendered walls with expressed dado moulding and some picture rails are still in situ. The current post office fit-outs include modern shelving systems, furnishings and fit-out that tend to obscure the original fixtures, windows and doors. The former telephone exchange, a freestanding structure beside the post office, was converted to mail contractors space. The additions of the private box area, toilets and lunch space, probably occurred during the 1980s.

The shallow barrel-vaulted ceiling is frescoed with panels, moulding, and plaster medallions. At the center of the ceiling, Potts frescoed a round medallion above the chandelier featuring a brilliant blue color, which appears especially striking contrasting with the subdued colors used in the rest of the frescoes. In the 20th century, Linda Croison and Philip Ward restored the frescoes, but preserved patches of Potts' original work in the back of the nave.

The son of a peasant, Kozlov was born and raised in Vladykino, a small village in the Saratov Governorate of the Russian Empire. In 1898 his family emigrated to Petersburg, where Vasily studied in Company's of encouragement of painters' school. After graduating from school, Kozlov was working in studios as master of stucco moulding for building's facades for six years. In 1906-1912 he was a student of the Imperial Academy of Arts.

The main staircase features a figured oak base, turned balusters, and sunburst carvings on the newel posts. The entry hall and living room both have pressed tin coffered ceilings. The living room has a fireplace decorated with brick and multicolored terra-cotta moulding and tile. The library, which was completely redone in the Craftsman style, with a coffered beam ceiling, a builtin secretary with leaded glass door, and wall sconces of iron and mica.

The Brunswick Street elevation is four storeys high and is constructed of rendered and painted masonry. There are thirteen windows on each floor, arranged in vertical panels between flat pilasters and becoming successively less decorated. The first floor windows are casements with semi-circular fanlights and distinctive projecting arched hoods. The second and third floor windows consist of pairs of rectangular sash windows with decorative moulding below the sill and around the frame.

Real name of god implies expression of his pervasive personality and concrete truth of His existence. Naam demands moulding of our personality which is meant opening of our inner self to establish personal touch with reality. Therefore, one has to be ethically strong, thoughtful and rightly meditative to attain this higher truth which is immediate and principle of man. Birth as a human being is to be taken as an opportunity to achieve liberation.

A selection of riffler files Riffler files are small to medium-sized files in an assortment of cross sectional shapes and profiles. The varying profiles and shapes enable them to be used in hard to reach, or unusually shaped areas. They are often used as an intermediate step in die making where the surface finish of a cavity die may need to be improved, e.g. in plastic injection moulding or die casting.

Kindsbach station was founded after 1871 and is located in the north-west of the local community of Kindsbach. It belongs to station category 6 and is served by the services of the Rhine-Neckar S-Bahn and Regionalbahn services on the Kaiserslautern–Kusel route. From the 1920s onwards, the company of Formsandwerke Ludwigshafen am Rhein, which quarried moulding sand and transported it by cableway to the station, was a significant freight customer.

The church features a polygonal chancel and two smaller polygonal rooms on the southern end used as a vestry and a sanctuary. The building is constructed of rock-faced sandstone laid in courses of random sized blocks, with elements such as quoining, continuous moulding beneath the gutter, plinth course and string courses chiselled smooth. The building has a plinth of larger rock-faced sandstone blocks. The angle buttressing is sandstone with wide chiselled edges.

Manufacturer Georges Huard founded Jouef in 1944 toward the end of World War II. The traditional home of the company was in Champagnole, France. In the early 1950s, as with many manufacturers, the company abandoned the use of lithographed tinplate for trains in favour of plastic injection moulding. The first Jouef electric train in HO scale, 1955. In 1979, Jouef opened a factory in Limerick, Ireland, but the ill-fated venture closed in 1981.

The Meigs-Bishop House is located in Madison's central business district, on the west side of Wall Street at Brookside Road. It is a 2-1/2 story wood frame structure, with a gabled roof, large central chimney, and clapboard exterior. Its main facade is five bays wide, with slightly asymmetrical placement of sash windows around a nearly centered entrance. The entrance is simply framed, with a six-light transom window topped by crown moulding.

The Valentine Wightman House stood in western Southington, on the west side of Mount Vernon Road at its junction with Whitman Road. It was a 2-1/2 story wood frame structure, with a gabled roof, central chimney, and clapboarded exterior. Its front facade was five bays wide, with a central entrance flanked by sidelight windows and narrow moulding, and topped by a peaked lintel. The gable ends slightly overhung the sidewalls.

Flanking the entrance are two shallow pilasters which divide the facade into three bays. Within the central bay, above the entrance, is a row of six round arched window openings divided by thin twisted columns and glazed with coloured glass leadlights. Above this is a large wheel window again featuring brightly coloured glazing. The parapeted gable is lined at cornice level with a repeated arch moulding aligned with the taper of the gable.

She became CEO of Autodesk in 1992. According to Forbes, Bartz "transformed Autodesk from an aimless maker of PC software into a leader of computer-aided design software, targeting architects and builders.""100 Most Powerful Women," Forbes (2005). She is credited with instituting and promoting Autodesk's "3F" or "fail fast-forward" concept – the idea of moulding a company to risk failure in some missions, but to be resilient and move on quickly when failure occurs.

It incorporated only minor visual changes, gone was the black full width grille moulding above the headlights and the "hole" like appearance of the centre of the grille between the lights. The rectangular headlights were retained within a bright silver like surround. Other modifications included deeper parcel racks that were capable of supporting air conditioning. A tweed like material was used to cover the interior skirt and a large part of the racks.

American inventor John Wesley Hyatt, together with his brother Isaiah, patented the first injection moulding machine in 1872.U.S. patent #133229, dated 19 November 1872. This machine was relatively simple compared to machines in use today: it worked like a large hypodermic needle, using a plunger to inject plastic through a heated cylinder into a mould. The industry progressed slowly over the years, producing products such as collar stays, buttons, and hair combs.

Motifs known from the stucco at Samarra permit the dating of structures built elsewhere, and are furthermore found on portable objects, particular in wood, from Egypt through to Iran. Samarra witnessed the "coming of age" of Islamic art. Polychrome painted stucco allowed for experimentation in new styles of moulding and carving. The Abbasid period also coincided with two major innovations in the ceramic arts: the invention of faience, and of metallic lusterware.

The company was founded by Samuel Elliott in 1870 as a joinery works, Elliott's Moulding and Joinery Company Ltd. It produced ammunition boxes during the First World War made by a workforce composed 90% of women. It changed to furniture production after the war. In the Second World War, once more a largely female workforce produced components for aircraft, including the Supermarine Spitfire, Tiger Moth, De Havilland Mosquito, Airspeed Oxford and Airspeed Horsa glider.

They are from the body. At his home in Much Hadham, Moore built up a collection of natural objects; skulls, driftwood, pebbles, rocks and shells, which he would use to provide inspiration for organic forms. For his largest works, he usually produced a half-scale, working model before scaling up for the final moulding and casting at a bronze foundry. Moore often refined the final full plaster shape and added surface marks before casting.

The roof is pierced by gabled dormers which have round- arch windows. The building corners feature Corinthian pilasters, and the main roof has a cornice with dentil moulding. The interior has twelve rooms, five of which are bedrooms. The house was built in about 1899 for George W. Gabriel, bookkeeper and later General Manager for George F Blake & Co. The area had been farmland up to 1896, when it was subdivided for residential development.

The 5.7-liter LT1 V8 engine The fourth generation of the Camaro was introduced in January 1993, as a 1993 model. The production was moved from GM's Van Nuys, California assembly plant to Sainte-Thérèse, Quebec, Canada from November 1992. The new design incorporated sheet moulding compound (SMC) made from chopped fiberglass and polyester resin for the roof, hatch, doors, and spoiler. Both the front and rear suspension design was improved over its predecessor.

During World War II, research for military purposes was done into 3D imaging, including lenticular technologies. Mass production of plastics and the technique of injection moulding came about around the same period and enabled commercially viable production of lenticular sheets for novelty toys and advertisements. The panoramic cameras, which were used for most of the early lenticular prints, were French-made and weighed about . In the 1930s they were known as "auto-stereo cameras".

Windows are topped by shouldered surrounds with slightly projecting caps, and the main eave has dentil moulding encircling the building. The interior retains many high-quality examples of Federal period woodwork, including an extremely rare in situ bust of the poet John Milton. The second-floor southwest bedchamber contains one of the city's most complete expressions of high-style Federal woodwork. The house was built about 1799 or 1800 for Joseph Haven, a prosperous merchant.

To produce the Kenya Ceramic Jiko, two main materials are needed: clay to make the ceramic, and metal. The moulding of the stove is made from mild sheet metal, which can be attained from scrap metal such as that found in bitumen drums. For the sheet metal, the minimum required thickness is 0.5 mm, and the maximum is 0.8 mm. All joints in the metal frame are held together using either riveting or folding.

Once again, the Dukes' record outsold XTC's previous album in the UK (Skylarking in this case). Partridge: "That was a bit upsetting to think that people preferred these pretend personalities to our own personalities… they’re trying to tell us something. But I don’t mind because we have turned into the Dukes slowly over the years." Moulding likewise felt that the "psychedelic element was being more ingratiated into the pie" since 25 O'Clock.

The north porch is described by art historian Nikolaus Pevsner as "sumptuously decorated", and intended as the main entrance. Externally it is simple and rectangular with plain side walls. The entrance is a steeply arched portal framed by rich mouldings of eight shafts with stiff-leaf capitals each encircled by an annular moulding at middle height. Those on the left are figurative, containing images representing the martyrdom of St Edmund the Martyr.

" To write the song, Moulding started with a three-note piano figure, which he then overdubbed with two guitar riffs: "The track didn't really happen until David Lord got hold of it. A local girl came in and sang the 'choir', tracked up a load of times." "All You Pretty Girls" is a kind of sea shanty centred on females. According to Partridge, the song came about while he was "dicking around, playing some Hendrix.

The effect was disliked by Moulding and Gregory, and Virgin was against including the track on the album. Gregory surmised this was because the lyrics could be perceived as "anti-American". Instrumentation included distorted guitar and harmonica, an open-E tuned guitar played in the style of Keith Richards, and a number of violin overdubs. "You're the Wish You Are I Had" was inspired by the Beatles, namely the song "Getting Better" (1967).

Other songs were produced but left off the album. "Thanks for Christmas" was a novelty song recorded to test Lord's potential as a producer for the band a few weeks before sessions commenced. According to Partridge, "I like the idea of anonymous music, and I thought I'd put together a song and then find an act to do it." It is the only instance in the band's catalog where Partridge and Moulding share lead vocals.

The song's keyboard sounds came from a string section sampled on a Mellotron. "Seagulls" was recorded at Crescent Studios in Bath and Odyssey Sound in London. Bassist Colin Moulding played his newly purchased Wal bass and session musician Steve Saunders, known for his work with Michael Nyman, played a euphonium solo. Producer David Lord and guitarist Dave Gregory voiced concerns about the discordant harmony in "Seagulls", but Partridge refused to change it.

The platform appears from distance to be five stacks from the careful moulding. From the jagati level, there are four stone steps that leads the devotee into the temple's sabha mandapa inside. The hall appears to be rectangular, yet consists of two fused squares and a rectangle. A small square is at the entrance, the largest square in the middle, and a rectangle facing the three sanctum (garbha griya), all supported by intricately carved pillars.

Kishore Bangla was published every Friday. It was a multi-coloured newspaper that was meant only for children. It was unique in its kind because it was a newspaper, rather than a literary magazine that was published on a weekly basis for a long period of time. Starting from mid-1970s, it made significant contribution in moulding and grooming the mindset of boys and girls of middle-class Bangladesh in a positive way.

RTM is a process using a rigid two-sided mould set that forms both surfaces of the panel. The mould is typically constructed from aluminum or steel, but composite molds are sometimes used. The two sides fit together to produce a mould cavity. The distinguishing feature of resin transfer moulding is that the reinforcement materials are placed into this cavity and the mould set is closed prior to the introduction of matrix material.

In the 1750s he published several books of designs which were widely used for things like ceiling moulding. These books include Twelve Girandoles in 1755, The Book of the Carver in 1758, a folio volume of Designs for Picture Frames, Candelabra, Ceilings, &c.; also in 1758 and monthly between 1755 and 1758, One hundred and fifty New Designs. He also had a great influence on Ince and Mayhew's book, The Universal System of Household Furniture.

Above is a rose window with a hood mould returning to form a string. The east-side elevation has a dog-tooth eaves moulding and a three light window. In the churchyard, at the edge of the woodland to the north, is the grave of Emma Vernon (1754–1818), who inherited the Hanbury Estate. The churchyard also contains a war grave of a Royal Corps of Signals soldier of World War II. CWGC Casualty record.

According to the pastoral visit of Bishop Bartolomeo Rull, the chapel was built on the design of a Greek cross plan and with a dome. The facade is plain, with strategically placed architectural feats. Flanking either side of the facade, there are two flat, austere-looking Doric pilasters which are topped by a blank entablature. The main portal is surrounded with a stone moulding with emphasis on the two corners above the door.

A view of Swindon in 2007 Andy Partridge and Colin Moulding grew up on Penhill council estate in Swindon. Partridge jokingly characterised the community as being populated almost entirely by people with physical, mental or emotional defects. In the 1960s, he was a fan of contemporary pop groups like the Beatles, but was intimidated by the process of learning guitar. When the Monkees grew popular, he became interested in joining a music group.

Partridge felt it was "a bit upsetting to think that people preferred these pretend personalities to our own personalities ... But I don't mind because we have turned into the Dukes slowly over the years." Likewise, Moulding felt that the "psychedelic element was being more ingratiated into the pie" since 25 O'Clock. When issued on CD, Psonic Psunspot was combined with 25 O'Clock and given the title Chips from the Chocolate Fireball (1987).

After Wasp Star, newly recorded XTC material was released sporadically. The four-disc hits and rarities boxed set Coat of Many Cupboards (2002) included "Didn't Hurt a Bit", a rerecording of a Nonsuch outtake. The Dukes of Stratosphear—with Dave and Ian Gregory—were reunited for the charity single "Open a Can (of Human Beans)" (2003). Another set, Apple Box (2005), included two new tracks: "Spiral", written by Partridge and "Say It", by Moulding.

All of the selections were written by Partridge, except three by Moulding ("King for a Day", "One of the Millions", and "Cynical Days"). Lyrically, several of the songs focus on parent-child relationships in addition to the state of world affairs. For Partridge, this was partly due to the fact that he had toddler- aged children. He attributed the influence of the Beach Boys' 1966 album Pet Sounds to Moulding's songs for the record.

"I started to drink heavily in those last few weeks and went off the rails a bit. I had to get back to England to calm myself down." He left them with "a long list of requirements ... in the mixing" and returned home on 7 October, likely with Moulding, while Gregory stayed for the end of mixing. Work on the album was completed when the group approved Fox's final mix on 22 October.

Plastic moulding production was contracted out. The factory was being stripped of production, volume and jobs. A cost reduction campaign followed with good-quality components being replaced by inferior cheap components, and there was a complete breakdown of any real preventative maintenance program, which resulted in a large number of machine and equipment breakdowns. The reality, rather than the myth, was the Hoover Meadowbank site was being run into the ground by corporate decisions.

Most of the doors still have their original decorative moulding. All of the buildings were covered with plafonds à la française (French-style ceilings: joists the same width as the spaces between them; see Plafond à la française in French Wikipedia). It has been listed since 1914 as a monument historique by the French Ministry of Culture. The castle is privately owned and is open to the public from June to September.

Sprue picker Lego mainly used injection-moulding machines from Arburg (Germany) and Engel (Austria), but also machines from Battenfeld (Austria) and Klöckner-Werke (Germany). No more than six two-component machines were used in the Lättich plant. Most of the accessories used for extraction, heating control, and post- processing were developed and built by Lego itself. In the case of the water- cooling appliances, Lego used only HB-Therm temperature control units.

This north aisle was demolished in 1898, with the building returning to its original size. The south doorway is early Norman, with large shafts and capitals in a scalloped style. The chancel arch shares many decorative motifs with the south doorway, however the inner arch has cushion-shaped capitals as well as extra moulding. The Duke of Wellington worshipped here whilst staying at Walmer Castle as Lord Warden of the Cinque Ports.

This is an essential feature to diminish feedback paths in hearing aids and assure better intelligibility in noisy-environment communication. The main goal in wearing earmolds is to attain better user comfort and efficiency. Earmolds (and their tubes) often turn yellow and stiff with age, and thus need replacement on a regular basis. Traditionally, the job of making earmolds is very time- consuming and skillful; each one is made individually in a moulding process.

An illuminated scroll is banded closely round the label moulding of the same window, and bears an appropriate inscription. The backs of the sedilia are coloured ultra-marine, with fluer- de-lis. The floor is paved with red and buff encaustic tiles, the estrade being of a richer pattern. The communion table consists of a massive oak frame supporting a slab of blue lias—the whole covered with ante-pendium of rich velvet elegantly embroidered.

The Noah Cooke House stands in a remote and wooded area of western Keene, on the north side of Daniels Hill Road. It is a 2-1/2 story wood frame structure, with a gabled roof, central chimney, and clapboarded exterior. Its main facade is five bays wide, with sash windows arranged symmetrically around a center entrance. The entrance is framed by simple moulding and topped by a transom window and cornice.

The walls of the core are load-bearing red-brown brick laid in English bond. Above verandah roof height, the external walls are rendered, ornamented with a narrow ovolo moulding supporting the timber eaves brackets to the main roof. The main entrance has a low-waisted, four panel cedar door with fanlight and half- glazed side panels. Timber-framed French doors with arched lights and rectangular fanlights open on to the three verandahs.

The entrance is a four-panel door, framed by wide moulding which is topped by a projecting cornice. With The house's early construction history is not known with certainty. Long referred to as the "24 acre homestead" in 19th-century records, it was owned at that time first by Reuben Frisbie and then by members of the Tucker family. Earlier owners are not identified; land records suggest it was built in the 1890s.

Each chair starts out as six kilograms of plastic pellets that are melted down and then injection-molded into the shape of the 1006 Navy Chair. Craftsmen add the H brace to make the chair sturdier and they smooth out any imperfections that result from injection moulding. The resulting 111 Navy Chair has the identical design of the 1006 Navy Chair. The one-piece design is scratch-resistant and suitable for heavy-duty use.

The church is a single story wood frame structure, finished in clapboards and resting on a granite foundation. Its main facade is divided into three bays, with the outer bays housing matching entrances, each flanked by pilasters and topped by an architrave with projecting cornice moulding. The central bay has a Gothic-style lancet window, as do all three bays at the balcony level. The sides of the church have four tall Gothic windows.

These columns are banded twice with a very rich and effective moulding, combining a cable, with a row of ball-flowers above it; below, a deeply cut chevron, pointing downwards. These shafts have no capitals; they run up into a horizontal fillet, from which spring plain vaulting ribs, which flow from the shafts as palm-branches do from the trunk. The vaulting is good sexpartite. Between the two aisles are pure pointed arches.

Kai has followed in his father's footsteps, and has played in Australia and around the world as the drummer for October Rage. Chambers has cited the philosopher Brett Abrahamsen as one of his intellectual heroes. Chambers returned to the UK in 2016 after living in Australia for over 30 years. He recorded an EP with fellow ex-XTC member Colin Moulding, called Great Aspirations by TC&I;, which was released in October 2017.

Richter worked as a research scientist at the CSIR in Pretoria, South Africa since 1970. His areas of involvement included solid-state chemistry (structure - property - processing - performance relationship), x-ray diffraction, high pressure phase studies, thermal analysis, magnetic materials, crystal growth, ferroelectricity, injection moulding, rapid prototyping and ceramic processing. In December 2019 a public memorial garden was created for Dr Richter in Mowbray, Cape TownThe Wim Richter Memorial Peace Garden, Mowbray, Cape Town, South Africa.

Karnataka is rich in its mineral wealth which is distributed fairly evenly across the state. Karnataka's Geological Survey department started in 1880 is one of the oldest in the country. Rich deposits of asbestos, bauxite, chromite, dolomite, gold, iron ore, kaolin, limestone, magnesite, Manganese, ochre, quartz and silica sand are found in the state. Karnataka is also a major producer of felsite, moulding sand (63%) and fuchsite quartzite (57%) in the country.

The elaborate moulding and keystone over the arched window protrude into the tympanum above. Windows are generally pairs of timber casements with pivoting highlights over. The ground floor is raised above the street and a half flight of stairs at the street corner leads to glazed timber doors opening onto the entry vestibule. The entry vestibule is octagonal in plan with timber panelling up to door head height and a tiled floor.

21; Wallace, 138−153 The Stirling Hoard, a rare find in Scotland of four gold torcs, two of them twisted ribbons, dating from the 3rd to 1st century BC, was discovered in September 2009. Torc from Burela, Galicia, with double moulding scotiae terminals, and hoop decoration. At the heaviest Iberian torc.González-Ruibal, "catalogue", fig. 33 The Roman Titus Manlius in 361 BC challenged a Gaul to single combat, killed him, and then took his torc.

The Wheat House is a historic house at 600 Center Street in Lonoke, Arkansas. It is a two-story wood frame structure, with a hip roof and weatherboard siding. Its massing and relatively modest styling are characteristic of the Georgian Revival, although it has a fairly elaborate entry porch, supported by slender Tuscan columns and pilasters. Dentil moulding is found at the base of the main cornice, and those that top the windows.

The Thomaston Opera House is prominently sited in Thomaston's downtown, at the southwest corner of Main and Clay Streets. It is a large three-story brick building with Romanesque features and a hip roof. Its dominant feature is a multi-stage square tower, rising through five levels to a clock stage, open belfry with triple-arched openings, and crowning pyramidal roof and weathervane. The roof cornice is adorned with dentil moulding and modillion blocks.

The entrance is surmounted by a rectangular shaped relief moulding, with a central diamond pattern and a cornice base. Above this, a central stair-light extends from the first to second floor, and contains a series of tangential arc mouldings along its length, with moulded glass panels. A narrow slit, possibly for ventilation, is located centrally in the gable parapet above. A three panel casement window is located on each floor either side of the central entrance feature.

The lower part of the building is completed by an unbroken continuous ledge, whose profile – three flat bands which are contrasted with each other by ovolo moulding – is taken over from the arcade arches. The architect contrasts two forms of cylinder and semi-sphere by a repeated emphasis on horizontals, and, over and above that, divides them into a palpable terrestrial zone and into a light, celestial one that cannot be precisely gauged with the eye.

The porch is supported by turned posts, and has a balustrade with square balusters. The interior of the house retains many original period finishes and features, including pocket doors, a china cabinet in the dining room, and original moulding and floors. The house was built in 1896 for Cicero Goddard Peck. The Peck family was locally prominent: Peck's uncle Asahel served as Governor of Vermont, and his father Nahum was a lawyer who also served in the state legislature.

Foundry sand is found in Dharamkot, near Batala; the deposits are located 6.5 km west of Batala. Exposed on both sides of Batala-Dera Baba Nanak road, the Dharmkot sand is a natural moulding sand, containing about 20% clay. Another deposit which is about 4 metres thick, occurs at about 6 km from Batala on the Batala Qadian road. The sand has a yellowish tinge on the surface, but is reddish brown at a depth of about 1 metre.

The backcorners of the cephalon end in so-called genal spines that stick backwards approximately to the 6th thorax segment. The central raised area of the cephalon (or glabella) has 4 pairs of furrows and expands in front of the eyes. The eyes are small, close to the glabella and in the rear half of the cephalon. The dorsal facial sutures, that split when moulding, arch from the front of the eye and pass in front of the glabella.

The exterior of the building is topped by two square corner towers, each containing three small arches, whose balustrade appears to spill over the pediments and the eagles that overlook the Zocalo. Salon de Cabildos The interior has large powerful arches, with richly decorated moulding at the main entrance. These lead to a double arcade covering a monumental staircase created by architect Alvaro Aburto. On each side of the stairwell are two patios surrounded by arches and columns.

Switch was a brand of electric guitars and electric basses that featured a one-piece body-and-neck construction, made by injection moulding of a patented polyurethane resin-based synthetic material called Vibracell, very similar to Cort's Luthite. The brand belonged to the short-lived Switch Music company in the mid-2000s. The primary designer of the various Switch models was Trev Wilkinson, later of Fret-King. The company first presented their guitars at the 2004 NAMM show.

Cup, 6.5 cm. high, Aswan, Egypt, 1st-2nd century AD, decorated with type A piped or trailed barbotine patterns. Barbotine is the French for ceramic slip, or a mixture of clay and water used for moulding or decorating pottery.Or opne word for it in French engobe is also used in France and in some contexts in America In English the term is used for three different techniques of decorating pottery, though in all cases mainly for historical works.

Diagram of a wall illustrating (orange strips) the crown moulding (top), dado rail (middle) and the skirting board (lower). The dado lies between the dado rail and the skirting board In architecture, the dado is the lower part of a wall, below the dado rail and above the skirting board. The word is borrowed from Italian meaning "dice" or "cube", and refers to "die", an architectural term for the middle section of a pedestal or plinth.

Upadhyaya started the monthly Rashtra Dharma publication from Lucknow in the 1940s, using it to spread Hindutva ideology. Later he started the weekly Panchjanya and the daily Swadesh. In 1951, when Syama Prasad Mookerjee founded the BJS, Deendayal was seconded to the party by the RSS, tasked with moulding it into a genuine member of the Sangh Parivar. He was appointed as General Secretary of its Uttar Pradesh branch, and later the all-India general secretary.

Demant was also the first investigator to discover the Sami mothers perform infant head moulding. In the fall of 1908, Demant spent 6–8 weeks with Johan Turi in a mountain cabin where she assisted Turi with his book Muitalus sámiid birra ("The Book of Lapps"). She took the notebooks in which Turi had written his book in Sami back with her to Denmark. She then transcribed the text, translated it into Danish, and organized it.

The piers are composed of five columns each with circular rolled capitals. The arches are moulded and pointed, with the nave arch bordered by a hood mould with label stops. There are mason marks on both nave-side pillars. To the south of the west crossing arch at the east of the nave, above and behind the Sir Charles Hussey monument, is a blocked entrance for a previous rood screen loft, indicated by an ogee head moulding.

Madrid: Espasa-Calpe. p. 91. . When Rodin exhibited The Age of Bronze at the Paris Salon of 1877, it was seen as so realistic that some accused him of moulding directly from the human body. Haquette defended Rodin against these allegations just after the latter's arrival in Brussels. Around this time, France's Ministry of Public Education and Arts was planning to build a Museum of Decorative Arts in Paris on the remains of the Court of Accounts.

In architecture, a hood mould, label mould (from Latin labia, lip), drip mould or dripstone, is an external moulded projection from a wall over an opening to throw off rainwater. This moulding can be terminated at the side by ornamentation called a label stop. The hood mould was introduced into architecture in the Romanesque period, though they became much more common in the Gothic period. Later, with the increase in rectangular windows they became more prevalent in domestic architecture.

PEEK melts at a relatively high temperature (343 °C / 649.4 °F) compared to most other thermoplastics. In the range of its melting temperature it can be processed using injection moulding or extrusion methods. It is technically feasible to process granular PEEK into filament form and 3D printing parts from the filament material using fused deposition modeling – FDM (or fused filament fabrication – FFF) technology. PEEK filaments have been demonstrated for producing medical devices up to class IIa.

The entire monument has a central part (slightly curved to follow the line of the street) on which lies the principal door (with a pointed arch and double moulding) and two towers, one on the crossroads and the other on the opposite side. The Palace was designed in the 13th century. Constructuction is assigned between 1229, when Gottifredo was Canon of the local Cathedral, and 1286, a year before his death, when was appointed Podesta of the town.

Glass press production mould tool Precision glass moulding is a replicative process that allows the production of high precision optical components from glass without grinding and polishing. The process is also known as ultra- precision glass pressing. It is used to manufacture precision glass lenses for consumer products such as digital cameras, and high-end products like medical systems. The main advantage over mechanical lens production is that complex lens geometries such as aspheres can be produced cost-efficiently.

Precision glass moulding can be used to produce a large variety of optical form elements such as spheres, aspheres, free-form elements and array-structures. Concerning the curvature of the lens elements, the following statements can be drawn: Acceptable lens shapes are most bi-convex, plano-convex and mild meniscus shapes. Not unacceptable but hard to mould are bi-concave lenses, steep meniscus lenses, and lenses with severe features (e.g. a bump on a convex surface).

In general, plano-curved lenses are easier to mould than lenses with both sides curved since matching of flat faces is easier. Moulding concave forms with small centre thickness is difficult due to sticking of the moulded part to the mould occurring as a result of the different thermal expansion coefficients. Furthermore it is recommended to avoid undercuts and sharp edges. For the lens design it should be considered that the lens has to be mountable in measurement systems.

The vessels are large, measuring about in height on average. They are composed of separately made segments of orange clay, typically assembled as a single piece, so that lids cannot be lifted. Conversely other pieces, especially of the lekanis shape, are made in several pieces, making them equally impractical for use. Ornamental motifs, dominated by acanthus garlands and architectural friezes, as well as heads and busts, are modelled in three dimensions, usually by moulding, and applied to the surfaces.

The lighthouse was built around the 1950s due to the distancing of the coast from the previous lighthouse. The building is industrial in style and has a square base supporting a rectangular prism with a number of windows opening to the outside of the lighthouse. It is topped by an entablature or moulding where the catadioptric system was kept. The lighthouse was built with polygonal stone slabs and the corners and windows were also edged with stone blocks.

This was built in 1930, as you can see on the weather vane. The building is industrial in style and has a square base supporting a rectangular prism with a number of windows opening to the outside of the lighthouse, currently the lower windows are covered. It is topped by an entablature or moulding where the catadioptric system is kept. The lighthouse was built with polygonal stone slabs and the corners and windows were also edged with stone blocks.

In 1903, Eichengrün co-developed the first soluble form of cellulose acetate with Theodore Becker. He went on to develop processes for the manufacture of cellulose acetate materials and devoted the rest of his life to the technical and economic development of plastics, lacquers, enamels, and artificial fibers based on cellulose acetate. During World War I his relatively non-inflammable synthetic cellulose acetate lacquers were important in the aircraft industry. He also pioneered the influential technique of injection moulding.

The windows in the towers have transoms and stone lintels, and the highest window in each tower features an elaborate stone hood- moulding. A wall dormer on the second story contains three rectangular windows with a circular window above, outlined in stone, framing a Maltese Cross. The garage has a full tower on the western corner which is identical to the two on the main building. The main door is a double door with a semi-circular arch.

The front (south- facing) facade is five bays wide, symmetrically arranged, with the entrance set in an arched opening at the center. The entry is framed by delicately- carved woodwork and topped by a semi-oval transom window. The cornice line of the roof is finished with dentil moulding. The house was built in 1810 by Francis Tufts, a veteran of the American Revolutionary War who hailed from Medford, Massachusetts and was one of Farmington's first proprietors.

Pointed arch door opening to south elevation of tower, with chamfered sandstone surround, hood moulding above stringcourse, recent double- leaf door and overlight. Narrower pointed arched doors to chancel lean-tos in similar chamfered surround having original timber double doors with four vertical panels and corresponding fixed timber overpanel. Interior having timber queen-post trusses on rounded braces rising from wall corbels, exposed rafters to nave and chancel. Timber flooring and wainscot to raised pew seating.

Over the chancel arch is a wide splayed lancet window or opening of early 13th century detail. The transept and chancel arches are very massive in appearance, with pointed heads and triple-splayed orders springing from slightly curved abaci, forming a continuous moulding round the piers. This responds in clumsy square bases the whole thickness of the wall, as if intended for a stop to some feature since removed. A chancel roof space is of unknown purpose.

It is set on a moulded plinth, and has paired buttresses at the corners. On the west side of the bottom stage is a two-light window with Decorated tracery, and on the north side in the middle stage is a clock face. On each side of the top stage is a tall two-light transomed bell opening. At the top of the tower is a battlemented parapet, under which is a moulding carved with flowers and animals' heads.

Ceiling rose ventilator, 2011 At a size of long, wide and high, the Hall provided space for seating 1,500. In 1913 the ceiling was plastered with a cornice and a "deep frieze of a delicate tint, and a picture moulding" around three sides of the Hall; this has now been replaced. The four main reinforced concrete roof beams create five ceiling bays, and in each bay are three plaster centrepieces representing vines and grapes. These are ventilator-covers.

There are two hatches in the east wall, assumed for the dispensing of alms, which Newman describes as 'a most unusual feature'. The font is a plain octagonal bowl which tapers down to a roll moulding, it is believed to be 14th century. The stained glass windows of the eastern side of the chancel depict the life of Christ (1868). The south chancel windows depicts Biblical stories of instruction to commemorate one of the headmasters of Cowbridge Grammar School.

Whereas Edingen and Fleisbach became residential with agriculture's fall in importance after the Second World War, Sinn is still an important industrial location, with the foundry, as ever, playing an important rôle. Among other things, one of Germany's few bellfounding businesses is to be found here. Among the foundry techniques used are modelling, moulding and valve making. Further established fields of enterprise are mechanical engineering, tool and appliance manufacture, sheet metal forming, galvanization and measurement and control engineering.

Eight large windows, four on each side, with double hung four-over-four sashes of clear glass light the nave. The walls are frescoed beginning at the tops of the pews and extending all the way to the ceiling. Potts decorated the side walls of the nave with pilasters and moulding which frame the windows. In the chancel, Potts created a portico of four square, fluted pilasters framing a paneled recess, framed by a barrel vault in the center.

During recording of the album, Moulding and Gregory "found themselves working at a car rental spot to sustain themselves between royalty checks." The album was mixed at Rockfield Studios, South Wales in November and December 1991. The mixing was due to be done by Dudgeon who instructed Partridge not to attend, but Partridge insisted he would appear anyway. At the studios, Dudgeon refuted suggestions from Partridge concerning the mix and insisted he mix the album as he desired.

The building was originally built in the Beaux Arts style. There were no major alterations to the building until the 1950s, when modern conveniences were added. Air conditioning was added to the building, necessitating drop ceilings to make room for the ducts, which obscured the original plaster moulding in the interior. Wood panelling was added to create more offices out of the large chambers present in the original design, and mahogany windows were replaced with aluminum ones.

The chancel south arcade is 15th-century. Its piers are Perpendicular, with polygonal piers and capitals and chamfered arches. The furthest east south arcade contains within it a supplementary Decorative arch springing from the piers, this of ogee form with multi-rounded moulding, topped with a twin run of decorative battlements leading to a flat topped finial; this arch was rebuilt in the 19th century. At each side within the westernmost chancel bays are 19th-century wooden choir stalls.

A similar decoration is found in the capital of the columns flanking the tomb of Agamemnon at Mycenae, but here the hypotrachelium projects forward with a cavetto moulding, and is carved with triple leaves like the buds of a rose. In the Doric order the term was sometimes applied to that which is generally known as the "necking," the space between the fillet and the annulet. The hypotrachelium was also called a collarino, or colarino, or colarin.

Another feature was that doorways were often enclosed by squared mouldings and the spaces between the moulding and the door arch – called spandrels were decorated with quadrifoils etc. Ornate stone ceilings, using so-called fan vaulting, made for huge unsupported spaces. King's College Chapel, Cambridge has magnificent specimens of these. Meanwhile, the Lady Chapel of Ely Cathedral has an unsupported stone ceiling approximately 30 feet by 80 feet, using a star formation of lierne vaults and bosses.

Glock began as a manufacturer of curtain rods in the 1960s, and knives for the Austrian military in the 1970s. He had not designed or manufactured a firearm until he was 52 years old. He was already an expert in polymers as a result of his previous business ventures. In 1980 he bought an injection-moulding machine to manufacture handles and sheaths for the field knives he was making for the Austrian army in his garage workshop.

In August 2014, Datsun Go (marketed as Datsun Go Panca) was launched in Indonesia following the Go+ Panca. As of 2015, it was available in 3 trims: T, T Option and the stylish T Active. As the top model, Datsun Go T Active came with all equipment T and T Option has, plus aero kits, body side moulding, silver painted cluster, fin and shift Base, JVC single-din head unit with FM radio and USB, and rear power windows.

Openings on the front facade are rectangular, and topped by splayed brownstone lintels. The front cornice is adorned with dentil moulding, a detail repeated in gabled dormers projecting from the roof. On the exposed side elevation there is a small sash window in a peaked-gable opening in the gable area, with a smaller half-round window above it just below the roof ridge. The interior only retains a few traces of its 18th-century origin.

Flaxwood is a Finnish manufacturer of guitars and instrument parts based in Heinävaara, North Karelia. The company produces the instruments from a natural fibre-reinforced thermoplastic through a patented injection moulding process. Flaxwood was founded in 2005 following a research project on natural fibre- reinforced thermoplastic composites led by Heikki Koivurova. A prototype was developed initially in 2003 with the design input of luthier Veijo Rautia and two years later Flaxwood introduced their first line of guitars.

A flag pole is located at each end of the structure. Each pillar comprises a cube-shaped base with a narrower square sectioned shaft topped by a pyramid. A projecting ornamental moulding surrounds the shaft near the top and the pyramid has a single step at about mid height. Rectangular marble slabs containing the names of the enlisted and also the names of those rejected for service are mounted on the front of the pillars supporting the gates.

Names of the fallen in the Boer War and World War I (left-hand side), 2015 Names of the fallen in the World War I (right-hand side), 2015 All pillars sit on a substantial plinth capped by a torus moulding. From this rises a shaft of banded sandstone which culminates in a stepped element. The entire front face of the pillar projects slightly forward. The outer pillars are each surmounted by stylised eternal flame finials of sandstone.

Tops exist with bung holes as above, and these hybrid drums with lid can be used to ship many non-volatile liquids as well as industrial powders. Many drums are used to ship and store powdered products as well as liquids, such as plastic beads for injection moulding, extrusion, and purified industrial grade powders like cleansers (e.g., fertilizers, and powdered aluminum). If used to transport dangerous goods across international boundaries, they may need to have UN certification.

Strip-built, or "strip-plank epoxy", is a method of boat building. Boatbuilding with strip planking Also known as cold moulding, the strip-built method is commonly used for canoes and kayaks, but also suitable for larger boats. The process involves securing narrow, flexible strips of wood edge-to- edge around temporary formers. The temporary formers are usually created via a process called Lofting whereby a set of tables is used to generate the shapes of the formers.

The upstream piers all have stone cutwaters. The parapet has a thick moulding on the outside and is built with holes to allow water to flow off the roadway. Sinclair detects spolia (reused stonework) from the Classical and Anatolian Seljuk periods in the construction of the current bridge. He interprets this as likely to indicate that the original bridge was built by the Seljuks and included some material from an earlier building of the Classical era.

Integral foam sandwich is made of aluminium alloys (AlCu4, AlSi9Cu3) and magnesium alloys (AZ91, AM60).H-D Kunze, J Baumeister, J Banhart, M Weber, P/M technology for the production of metal foams, Powder Metallurgy International, 1993, 25:182-185.H Wiehler, C Körner, RF Singer, High pressure integral foam moulding of aluminium – process technology, Advanced Engineering Materials, 2008, 10:171-178. In this process the material for the core and face sheet is the same.

Other considerations when choosing an injection moulding material include flexural modulus of elasticity, or the degree to which a material can be bent without damage, as well as heat deflection and water absorption. Common polymers like epoxy and phenolic are examples of thermosetting plastics while nylon, polyethylene, and polystyrene are thermoplastic. Until comparatively recently, plastic springs were not possible, but advances in polymer properties make them now quite practical. Applications include buckles for anchoring and disconnecting outdoor-equipment webbing.

Injection moulding consists of the high pressure injection of the raw material into a mould, which shapes the polymer into the desired form. Moulds can be of a single cavity or multiple cavities. In multiple cavity moulds, each cavity can be identical and form the same parts or can be unique and form multiple different geometries during a single cycle. Moulds are generally made from tool steels, but stainless steels and aluminium moulds are suitable for certain applications.

Heated-manifold direct- injection die casting, also known as direct-injection die casting or runnerless die casting, is a zinc die casting process where molten zinc is forced through a heated manifold and then through heated mini-nozzles, which lead into the moulding cavity. This process has the advantages of lower cost per part, through the reduction of scrap (by the elimination of sprues, gates, and runners) and energy conservation, and better surface quality through slower cooling cycles.

It has a parapet concealing the roof, the building frontage has decorative motifs and smooth textured walling. There is projected quoin moulding around arched windows set in straight lines with other quoins on both sides of the upper facade and a cantilevered box verandah. In 2014 a heritage grant of 26,418 was awarded to the Glasgow House and other heritage buildings for work such as painting and new verandahs and windows as part of Anzac Centenary commemorations.

Using injection moulding construction techniques used for the helmets, Nava was able to develop a polyurethane boot plate that replaced the former metal models.Masia, pg.38 Metal plate bindings were popular in the 1970s, but the hard plate was difficult to walk on and subject to wear; Nava's soft plate and boot eliminated both problems. Nava first showed the system in April 1983 in Italy, and started sales in the winter of 83/84, and Canada in 1985.

For nearly the entirety of the band's existence, frontman Ellefsen has altered his facial appearance using several alternatives before using a prosthetic mask and ear set. The studio who made Mortiis' mask asked for a character reference for the moulding. The mask was always coupled with ears. During Era I the mask covered his whole face, though by Era III it had an appearance whereby it seemed to be falling off and was stitched in place.

To the right of the presbytery, there is a realistic sculpture of the chapel's benefactor, Father Buenaventura de Medina Picazo. The upper choir area has a rectangular iron railing and also has the appearance of an altarpiece. Acanthus leaves are used to form the fretwork containing a series of medallions bearing the anagrams of the "Five Persons": Jesus, Mary, Joseph and Mary's parents Joaquín and Ana. The railing is surrounded by moulding that appears to thread through the fretwork.

A porch, sympathetic in style to the rest of the house, has been built around the base of the tower. Eave lines are decorated with dentil moulding and decorative brackets. A single-story ell extends the main block to the rear, where it is joined to a small carriage barn. The house, built in 1875, was designed by Cherryfield resident Charles A. Allen, who designed three other high-style houses in Cherryfield, contributing to the town's rich architectural heritage.

More recently microlens arrays have been fabricated using convective assembly of colloidal particles from suspension. Advances in technology have enabled micro-lenses to be designed and fabricated to close tolerances by a variety of methods. In most cases multiple copies are required and these can be formed by moulding or embossing from a master lens array. The master lens array may also be replicated through the generation of an electroform using the master lens array as a mandrel.

Reliefs never decorate walls in an arbitrary way. The sculpture is always located in several predetermined areas, the metopes and the pediment. In later Ionic architecture, there is greater diversity in the types and numbers of mouldings and decorations, particularly around doorways, where voluted brackets sometimes occur supporting an ornamental cornice over a door, such as that at the Erechtheion. A much applied narrow moulding is called "bead and reel" and is symmetrical, stemming from turned wooden prototypes.

The cornice is elaborately decorated with egg and dart moulding, and rows of rosettes on the soffit and face. The words, "THE BIG BLOCK" and "FINNEY ISLES & CO. LIMITED" are contained on the parapet in raised lettering. Above the parapet is a central raised classical pediment containing the date "A1909D". A concrete and glass overhead walkway that spans from the building to the opposite side of the Queen Street Mall intrudes into the facade at the first floor level.

Most cases of chronic bronchitis are caused by tobacco smoking. Chronic bronchitis in young adults who smoke is associated with a greater chance of developing COPD. There is an association between smoking cannabis and chronic bronchitis. In addition, chronic inhalation of air pollution, or irritating fumes or dust from hazardous exposures in occupations such as coal mining, grain handling, textile manufacturing, livestock farming, and metal moulding may also be a risk factor for the development of chronic bronchitis.

The Georgian-styled rendered exterior is scored to resemble ashlar, and presents a symmetrical front facade to Main Street. Entrances are set back at either end under small pedimented porticos, and the upper storey of each house features narrow, round-headed windows either side of large French doors. These open onto a small balcony above a projecting ground floor bay. All the second level windows and doors are protected by curved drip moulding and full-length shutters.

The 6100 was the slowest Power Macintosh in terms of processor speed upon introduction. Eventually, the 6100 series was able to be upgraded through third-party solutions such as Sonnet Technologies Crescendo G3 NuBus (up to 500 MHz) and G4 NuBus (up to 360 MHz; discontinued) and Newer Technology's MaxPower G3 processor upgrades. Early models had a CD eject button that would stick in. This was rectified on later models with a subtly re-profiled button moulding.

Illustration of the stone inn sign, dated 1716 In its St George's Fields location, the tavern was known to have existed in 1642. It was adjacent to a marshy area of ponds draining into the Neckinger brook, where the duck-baiting took place. The inn sign, dated 1716, was an oblong red moulding in stone composition showing a dog with a duck in its mouth. The left of the sign showed the badge of Bridge House Estates, the landowner.

The whole arch rests upon scallop capitals on the original shafts and the door itself is fitted with decorative strap hinges. Inside the church and west of the doorway there is an unusual chalice-shaped Caen stone font, which, like the chancel arch, dates from the mid-12th century. With a cable moulding around the rim and an arcade of 12 round arches it is decorated with alternately inverted foliate emblems. The basin sits on a 19th-century plinth.

The building corners are quoined, and the main eaves are studded with heavy brackets and lined by dentil moulding. A two-story gabled section projects at the center of the front facade, housing the main entrance in a slight recess, flanked by sidelights and topped by an eyebrow transom window. The doorway surround matches that of the paired round-arch windows above, with a bracketed segmented-arch top. Windows are rectangular sash, with bracketed cornices and lintels.

The District No. 5 Schoolhouse is located a short way east of the village center of Underhill, on the south side of Pleasant Valley Road at its junction with Stevensville Road. It is a 2-1/2 story wood frame structure, with a gabled roof and clapboarded exterior. Its main facade is three bays wide, with an entrance topped by a modest corniced entablature. Windows are set on both levels of the outer bays, trimmed by simple moulding.

Like other parts of Frindsbury, chalk has been extracted, high quality moulding sand has been taken from a pit near the Church, and William Burgess Little built 25 five barges at his yard between 1843 and 1871. The first was the Sarah Little and the last called W.B.Little Finish. James Little built three barges here in 1891, 1893, and 1895. A potter's kiln can be seen on an 1830 watercolour by Susan Twopeny, now in Rochester Guildhall Museum.

Example of moulage on a manikin Moulage has evolved dramatically since its original intent. In modern terms, the word moulage refers to the use of "special effects makeup (SPFX) and casting or moulding techniques that replicate illnesses or wounds" in simulation based techniques. Common examples include designing diabetic wounds, creating burns or other illness effects, like dermatological rashes. These illness and injury effects are applied to training manikins or Simulated/Standardized patients for training or other purposes.

It is a smooth rendered brick building with a hipped roof. The principal, south western façade of the School of Arts, which addresses Kent Street, is symmetrically arranged and employs classical proportion and detailing. The keystone of the moulding surrounding the central archway has a plaster moulded bust of Minerva, goddess of the city and protector of civilised life. Internally the building is arranged around a large central hall, accessed from the principal entrance off Kent Street.

For Marine Oussedik the art of sculpture and that of drawing are complementary both needing to be " as exact as possible whatever the position of the horse "6,36. First the model is cast in earth or wax. Because of the fragile balance of the horse (a mass on thin legs) a framework and a support are required. Once the model is finished, it is moulded and twelve bronze casts can be made before the moulding is destroyed.

The entrance way is sheltered by a horizontal, concrete awning with a moulded profile and supported on tapered masonry columns with a decorative vertical banding pattern. The entrance door is recent and is accessed via splayed concrete steps. Lettering "KINGAROY SHIRE COUNCIL CHAMBERS" is above the entrance and is framed with a simple decorative moulding and flanked by two stylised classical columns with fluting protruding from the facade. Flag poles rise from the roof behind the parapet.

However, from the eighth century, more sophisticated buildings emerged. Early Romanesque ashlar masonry produced block-built stone buildings, like the eleventh century round tower at Brechin Cathedral and the square towers of Dunblane Cathedral and The Church of St Rule. After the eleventh century, as masonry techniques advanced, ashlar blocks became more rectangular, resulting in structurally more stable walls that could incorporate more refined architectural moulding and detailing that can be seen in corbelling, buttressing, lintels and arching.

Scruton, however, suggests that a motif is distinguished from a figure in that a motif is foreground while a figure is background: "A figure resembles a moulding in architecture: it is 'open at both ends', so as to be endlessly repeatable. In hearing a phrase as a figure, rather than a motif, we are at the same time placing it in the background, even if it is...strong and melodious".Scruton, Roger (1997). The Aesthetics of Music.

Shell moulding, also known as shell-mould casting, is an expendable mold casting process that uses resin covered sand to form the mold. As compared to sand casting, this process has better dimensional accuracy, a higher productivity rate, and lower labor requirements. It is used for small to medium parts that require high precision.. Shell molding was developed as a manufacturing process during the mid-20th century in Germany. It was invented by German engineer Johannes Croning.

A completed Charger 1 body In late 1976, the Chepeko was redesigned by Mike Carlton, with the bodyshell comprising a single moulding incorporating new front and rear styling, and an integrated front spoiler. Kits were first advertised in early 1977, as the Embeesea Charger, that included parts as previously supplied in the Chepeko kit. Over 150 kits were made. In 1984, the moulds were sold to DJ Sportscars, then to MDB Sportscars, and it was marketed as the Saratoga.

Shevardnadze was a strong supporter of political reform in the Georgian SSR. He created agencies attached to the Central Committee of the Georgian Communist Party whose main task was studying, analysing and moulding public opinion. These agencies worked closely with Georgia's communications networks and media; government ministers and Shevardnadze were regularly interviewed live on television. Shevardnadze criticised flattery in Georgia and said he and his government's activities needed to be criticised more often, especially during party congresses.

The upper rooms were open to the roof, which had a collar-purlin supported by crown-posts with four-way brackets. The cambered tie-beams are braced from principal posts in the side walls. An ovolo moulding cut from the solid runs from each face of the tie beams and along the upper edge of the wall plates. Riven lath filling in the internal trusses may represent an early division of the wing into separate lodgings.

At one point, Moulding and Gregory were working at a car rental service for additional income. Partridge was eventually left with "about £300 in the bank", he said, "which is really heavy when you've got a family and everyone thinks you're 'Mr Rich and Famous'." A court-enforced gag order restricts the band from speaking publicly on the alleged improprieties. According to Partridge, Reid was "very naughty" and left the band with roughly £300,000 in unpaid VAT.

XTC did not technically break up in a legal sense. As of 2014, the group still existed as a trademark controlled by Partridge and Moulding. Throughout the 2010s, selected albums from the band's catalog were reissued as deluxe packages centred on new stereo and surround sound mixes by Steven Wilson. Partridge said that he did not "insist on any mastering or messing with XTC 5.1" and that his involvement with Wilson's mixes goes only as far as authorizing them.

XTC's principal songwriters were guitarist Andy Partridge and bassist Colin Moulding. Partridge, who wrote the majority of XTC's songs, was the group's frontman and de facto leader. He drove the band's image, designed many of their record sleeves, and handled most of their interviews. His involvement with XTC's record sleeves stemmed from his disappointment with the sleeve for the "Statue of Liberty" single, which depicted a poorly cropped photo of the statue and the XTC logo in red.

Richard Phené Spiers (1838 - 3 October 1916 London) was an English architect and author. He occupied a unique position amongst the English architects of the latter half of the 19th century, his long mastership of the architectural school at the Royal Academy of Arts having given him the opportunity of moulding and shaping the minds of more than a generation of students. Spiers wrote most of the articles dealing with architecture for the 1911 Encyclopædia Britannica.

From January 2011, GFP Engineering Ltd, a Glass Reinforced Plastic (GRP) moulding company, will commence trading after relocating from nearby Lichfield. There is also a marina, Aldridge Marina, which recently underwent full refurbishment offering facilities for canal boat moorers. Most of the towns shops are located either on High Street, Anchor Road, or in the shopping area known as "The Parade". Well-known shops here include WH Smith, Iceland supermarket, Home Bargains, and Boots The Chemist.

St Mary's church in 1907 St Mary's church with spire in 1907 The nave looking towards the chancel c.1923 The same view in 2014 The church is built of flint rubble with stone dressings, while the tower is coated with Roman cement. Pieces of moulding and columns of an earlier building are used in the walls. The roofs of the north chapel and north aisle are of slate, and those of the rest of the church of lead.

Its historic exterior features have been compromised by the application of synthetic siding. These features included a modillioned cornice, window surrounds with rope moulding on the caps, and an early 20th-century portico with paired square columns. The house was built about 1896, and was typical of early triple-deckers built to house workers in the factories of South Worcester and Quinsigamond Village. Its first owners, and a number of its early tenants, were Swedish immigrants.

Campbell is responsible for much of the scholarship since. have been slow to allow the Catherine panel as part of the altarpiece, though it is undoubtedly by van der Weyden or a near-contemporary follower. Evidence against this link includes the fact that the moulding of the window to the left of the Gulbenkian female saint is plain, while that next to Saint Joseph is chamfered. Such an inconsistency in a single van der Weyden work is unusual.

In 1993, a new factory was built for Lego in Willisau. The architecture was characterized by a main entrance, beyond which were passageways connecting to the various production halls on either side. The Willisau facility also had its own railroad, which connected to the Swiss Federal Railways network. In addition to injection moulding, printing, assembly, and packaging, Willisau also operated a blow-wax machine for Bionicol packaging, and two deep-drawing machines for the production of Lego building boards.

According to Michell, the Galaganatha temple is notable for being almost an exact copy of the Svarga Brahma temple of Alampur in Andhra Pradesh, a temple that is dated to 689 CE. Given both Alampur and Pattadakal were a part of the Badami Chalukya kingdom, an exchange of ideas is likely. The basement of the eastern moulding is notable for depicting friezes of Panchatantra fables, such as that of the mischievous monkey and the fable of two-headed bird.

In 2014, Light Stax were introduced as another LED light compatible bricks. Stax Hybrids sets came out in September 2018 and build on the Light Stax with Light, Sound, Connector and regular Stax bricks allow for light and sound. In 2011, Lego sued Guangdong Jumbo Grand Plastic Moulding Industrial over its compatible BanBao's copycat packaging. The two companies settled their case out of court with Guangdong agreeing to create unique packaging and a new figure, ToBees.

It has similar detailing and decorative features to the other buildings including decorative brackets between the verandah openings and the top of the parapet wall and scalloped edging features above the openings. Circular moulding formed from concrete emphasises the entrance points. Openings on the verandah have been altered where it appears early door openings have been enclosed with aluminium windows and sheeted to floor level. Painted floorboards are exposed but it is unclear if these are recent.

The Foundry comprised moulding shops, casting bays, fettling shops and machine shops, all suitable for castings up to three tons weight. Although larger castings were made by mixing metal from all the sources these were machined and finished outside. The remainder of the site comprised the Fabrication Shops, three bays laid out for the production of welded fabrications and heat exchangers. Following World War II a new laboratory block was added adjacent to the Sheffield Road entrance.

A gravimetic blender is an item of industrial equipment used in the plastics industry to accurately weigh two or more components and then mix them together prior to processing in an injection molding machine, plastics extrusion, or blow moulding machine. There are two types of gravimetric blender. Loss in weight This type of gravimetric blender measures the "loss in weight" from two or more hoppers using a load cell under each hopper. Material is usually dispensed from the hoppers using a screw conveyor.

If done correctly, the cope cut in the end of the rail will mate perfectly with the sticking profile. When glued together, the resulting joint will have sufficient strength for most cabinet door applications without further reinforcement. For extremely large and heavy doors, the cope and stick joint can be further reinforced with dowels, loose tenons, or by some other method. For the other methods of frame construction, the inside profile is created either by mitred sticking or by an applied moulding.

The capping application must direct water away from the original under-lying wood material and prevent infiltration of water into the structure. Cladding applied to exterior window and door casing (brick-moulding) and their associated parts is often referred to as window capping or window cladding. This sort of capping is typically applied in order to eliminate the need to re-paint wood window trim. The aluminum capping helps to prevent wood rot by protecting the wood from water and snow.

The garage has been extended with an open-sided canopy with a gently pitched roof and has been paved with brick pavers. The main door is located within a wall with a stepped, asymmetric parapet and has delicate concrete moulding around the opening. Circular moulded cartouches adorn the exterior in a number of places. Reports of the interior highlight the use of hand-made flooring tiles, panelled ceilings and walls, gently arched openings and timber-framed glass doors with decorative tracery.

The MX-5 was unveiled at the Chicago Auto Show on February 10, 1989, with a price tag of . The MX-5, with production code NA, was made available for delivery to buyers worldwide in the following dates: May 1989 (as a 1990 model) in the US and Canada; September 1, 1989 in Japan; and 1990 in Europe. An optional hardtop was made available at the same time, in sheet moulding compound (SMC). Demand initially outstripped production, fueled by enthusiastic press reviews.

In viewing the performance, the audience leaves the daily reality to move into a mode of make-believe, or "what if?" It is self-evident that this fits well with all types of verbal lore, where reality has no place among the symbols, fantasies, and nonsense of traditional tales, proverbs, and jokes. Customs and the lore of children and games also fit easily into the language of a folklore performance. Material culture requires some moulding to turn it into a performance.

Rolling produces pancetta's distinctive shape, while the casing prevent case hardening in the latter stages of the production process. Following rolling and packing, the pork undergoes enzymatic reactions facilitated by exposure to a warm environment of 22–24 °C for 24 to 36 hours. It is simultaneously exposed to cold smokes for desirable colours and flavours and to prevent moulding. Finally, the smoked pork is held at 12–14 °C and 72–75% relative humidity for 3–4 weeks for drying.

The main entrance is framed by simple moulding and topped by a transom window. The building has a central hall plan, with original wide floor boards, plasterwork, and fireplaces. Some of the upstairs rooms have swinging walls mounted on strap hinges that can be moved to create a large ballroom. The tavern was built in 1773 by Daniel White, and was in use as a tavern when the French Army marched through the area in 1781, camping just to its north.

Lancet windows at Hexham Abbey, UK A lancet window is a tall, narrow window with a pointed arch at its top.Buffalo Architecture , accessed 24 October 2006 It acquired the "lancet" name from its resemblance to a lance.Encyclopædia Britannica Online accessed 24 October 2006 Instances of this architectural element are typical of Gothic church edifices of the earliest period. Lancet windows may occur singly, or paired under a single moulding, or grouped in an odd number with the tallest window at the centre.

The Richardson House stands on the south side of Lincoln Street, just west of the town's business district. It is a two-story brick building, with a hip roof and a granite foundation. The roof cornice is broad and studded with irregularly spaced Italianate brackets, with a line of dentil moulding. The street-facing facade is three bays wide, all windows, with the Colonial Revival entrance set in a projection to the left, under a flat-roofed porch supported by square paneled pillars.

The Lego factory in Kladno, Czech Republic Lego injection moulding machines, made by the German company Arburg Since 1963, Lego pieces have been manufactured from a strong, resilient plastic known as acrylonitrile butadiene styrene (ABS). As of September 2008, Lego engineers use the NX CAD/CAM/CAE PLM software suite to model the elements. The software allows the parts to be optimised by way of mould flow and stress analysis. Prototype moulds are sometimes built before the design is committed to mass production.

The Jonas R. Shurtleff House is located in southern Winslow, on the west side US 201, a short way south of its junction with Maine State Route 137. It is a two-story wood frame structure, with a gabled roof, vertical board siding, and a granite foundation. The main roof gable and side gables are adorned with bargeboard trim. The ground floor windows are topped by extended cornices supported by narrow paired brackets, while second-floor windows are topped by square-headed moulding.

The front of the block has a full two-story porch, with turned posts, decorative brackets and frieze moulding. The corners of the building are pilastered, and the mansard roof is pierced by numerous pedimented dormers. The rear section of the building was built in 1895 as a hall for the local chapter of the Independent Order of Odd Fellows (IOOF). The principal feature of this three-story structure is its east facade, which has a richly decorated two-story Queen Anne porch.

The walls are of stuccoed brickwork; with stucco moulding includes bracketed pediment-labelled moulds to upper windows; upper parapet to match balustrade on first floor balcony; broken segmental pediments rising from upper parapet over the entrance bay. In addition to the main hall that holds up to 300 people, the town hall has four additional rooms: the Jubilee Hall (accommodates up to 100 people), Charles Byrnes Room (accommodates up to 40 people), two meeting rooms (accommodating 30 and ten people respectively).

Kadapuram Abraham Isaac () (10 July 1925 – 12 September 2005) was an Indian writer and librarian. He was a Professor and Head of the Department of Library and Information Science at the University of Kerala, Thiruvananthapuram. Isaac was known for initiating and moulding the professional Library and Information Science (LIS) education in Kerala and has authored several books on Library and Information Science. He had served as a member of the Senate of the Kerala University and as Dean of its Arts Faculty.

The brochure for the 1995 Lincoln Mark VIII LSC claims a 0-60 mph (97 km/h) acceleration time of 7.5 seconds. The LSC featured unique body colors, distinct rear decklid badging, perforated leather seat inserts, and floor mats. The bright chrome inserts normally found in the body-side moulding and bumper on the Mark VIII were replaced with monochrome body color inserts on the LSC. The 1995 Mark VIII LSC also marked the first domestic use of HID headlights.

Plaque at Lombardy Hall Lombardy Hall is located in Brandywine Hundred north of Wilmington, Delaware, on the east side of Concord Pike (United States Route 202, north of its junction with Foulk Road (Delaware Route 261). It is a 2-1/2 story stone structure, with a slate side gable roof and brick chimneys. The main facade is five bays wide, with a center entrance topped by a four-light transom window. Interior features include original wooden paneling, cornice moulding, staircases, and trim.

Further plants came up in Germany, Spain, England, Hungary and Poland. The company went back to a privately held company in 1985 after 17 years as a public company. In the 1990s, Guardian could note down an upswing both in the sectors construction materials and automotive products due to several takeovers and acquisitions: Automotive Moulding Company Warren, Michigan; Lab. Radio from Valencia, Spain; Builder Marts of America (BMA) and Cameron Ashley Building Products (which is now the Guardian Building Products Distribution) in 2000.

Sri Lakshmi Chennakesava swami temple Nagarjunakonda Museum Nagarjunakonda, meaning the hill of Nagarjuna, was named after the Buddhist scholar and savant Acharya Nagarjuna. It was a great religious centre promoting Brahmanism and Buddhist faiths, moulding the early phases of art and architecture affiliated with them. The Ethipothala Falls lies 8 km from Macherla, is a mountain stream cascading down the hills as Chandravanka and Suryavanka streams. The Suryavanka falls from a height of 21 meters into a lagoon and joins River Krishna.

Kohlase made history as the first New Zealander to win world championships as a player and a coach.Tony Smith, "Champion Black Sox face exodus of talent", Stuff News, 11 March 2013 (Retrieved 11 March 2013) Kohlhase has said: '"Coaching at the elite level in sport is all about having a vision, devising a game plan, picking and moulding players to achieve that plan, and working with other professionals to develop players' full potential".Airport Times, Issue No 35, October 2004, p. 5.

In addition to posing and performing hard work, he learned the art of moulding, design in relief, and the study of the human body. In carving marble and shaping clay he was more than ever convinced to become a sculptor. 1917 - Mario continued his studies by the painter and sculptor Giuseppe Foglia and started his own studio in Pazzallo, in the house that is now the Mario Bernasconi Museum. In his studies, Mario was deeply inspired by Michelangelo, Donatello, Rodin, Maillol and Lehmbruck.

Moulding (also spelled molding in the United States though usually not within the industry), also known as coving (United Kingdom, Australia), is a strip of material with various profiles used to cover transitions between surfaces or for decoration. It is traditionally made from solid milled wood or plaster, but may be of plastic or reformed wood. In classical architecture and sculpture, the molding is often carved in marble or other stones. A "plain" molding has right-angled upper and lower edges.

Volleyball competitions (beach and indoor) at the 2008 Summer Olympics in Beijing were held from 9 to 24 August 2008. Indoor volleyball events were held at Capital Indoor Stadium and Beijing Institute of Technology Gymnasium. Beach volleyball competitions were held from 9 to 22 August 2008 at the Beach Volleyball Ground at Chaoyang Park. The 2008 Summer Olympics volleyball competitions brought the introduction of the new ball with a new moulding design making it more softened compared to the Mikasa MVP200.

The Right Hook was presented from the start of Newstalk in 2002 by the same presenter until his retirement. Garrett Harte was the original producer, and is credited by Hook on his autobiography Time Added On with moulding him into the presenter he is today. Harte was later appointed Newstalk's station editor and the show was subsequently produced by Mark Simpson. The show was well known for Hook's opinionated style of broadcasting and regularly traveled around Ireland for on-location broadcasts.

Bolbolenellus is an extinct genus of trilobites, fossil marine arthropods, with five species attributed to it currently. It can be easily distinguished from all other trilobites by the combination of the absence of dorsal sutures in the head shield like all Olenellina (which in all other trilobite suborders assist in moulding by splitting open), and a distinctly bulbous frontal lobe (L4) of the raised axial area in the head (or cephalon) called glabella. The species lived at the end of the Lower Cambrian.

Internally the shell of the Big Pineapple is unlined and the texture of the moulding is visible on the inside. It is divided into two levels for the purpose of exhibiting displays and for accessing the viewing platform above. Each floor is supported on exposed round steel posts which are painted. A central steel post extends up through the structure to provide additional support to the two floor levels and to support the viewing platform and the stalk of the pineapple above.

Ancient wooden molds used for jaggery & sweets, archaeological museum in Jaffna, Sri Lanka. Molding or moulding (see spelling differences) is the process of manufacturing by shaping liquid or pliable raw material using a rigid frame called a mold or matrix. This itself may have been made using a pattern or model of the final object. A mold or mould is a hollowed-out block that is filled with a liquid or pliable material such as plastic, glass, metal, or ceramic raw material.

The timber-framed window has fine timber glazing bars dividing the sash into multiple panes. The double- leaf entrance doors, which retain original hardware, are timber with glazed panels and prominent moulding. A small entrance hall with a patterned terrazzo floor and rendered walls contains a terrazzo stair with a decorative iron balustrade and clear-finished timber handrail, rising to a first floor foyer at the rear of the building. The ground floor understorey is enclosed to form classrooms, offices, and storerooms.

After he graduated from the Cutter School, Bitzer started a six-year apprentice working for the Welch & Griffiths saw works in Arlington. At the end of his apprenticeship the company went out of business. After he left the employ of Welch & Griffiths Bitzer went to work as a mill hand, on an irregular moulding machine, in the mill of Theodore Schwamb, a manufacturer of piano cases. In 1897, when the Schwamb Mill was incorporated, Bitzer became a stockholder, and clerk of the corporation.

The Supreme Court (SC) held final hearing on the case from 6 August 2019 to 16 October 2019. The bench reserved the final judgment and granted three days to contesting parties to file written notes on 'moulding of relief' or narrowing down the issues on which the court is required to adjudicate. The final judgement in the Supreme Court was declared on 9 November 2019. The Supreme Court ordered the land to be handed over to a trust to build the Hindu temple.

He attended local schools and was tutored by his uncle Rev. John J. Bulfinch, esq. for college and he attained degrees from Amherst College in 1882 and 1889. Lovell taught school in Nobleboro and Norridgewock, Maine,The National cyclopaedia of American biography: being the history of the United States as illustrated in the lives of the founders, builders, and defenders of the republic, and of the men and women who are doing the work and moulding the thought of the present time.

Nickell, p. 55 Despite his genetic disability, Sealo was still able to carry out feats like sawing a crate in half and shaving with a straight razor on his own, as well as moulding animal figurines out of clay.Nickell, p. 148 His partner on-stage was Toby, a chimpanzee. Sealo had trouble getting up and down the performance stage due to his weak legs. He would spend the time in which he was not performing on stage selling pitch cards.

The Absalom Fowler House is a historic house at 502 East 7th Street in Little Rock, Arkansas. It is a two-story brick building, with a hip roof and a front portico supported by fluted Ionic columns and topped by a balustrade. The building is encircled by an entablature with modillion blocks and an unusual double row of dentil moulding giving a checkerboard effect. The house was built in about 1840 by Absalom Fowler, a lawyer prominent in the state's early history.

On their shoulders were gold ribbons, and embroidered silver mesh, their hats decorated in silver with white plumes and white ribbons. The five coaches were pulled by eight large, black Frisian horses each. The first coach symbolised the peace between Portugal and France, and was large, encircled with windows and decorated in dark green velvet entirely covered in gold moulding in relief. The roof formed an airy pavilion that was completed by a dome or crown, forming a large raised rose.

Millwork building materials include the ready-made carpentry elements usually installed in any building. Many of the specific features in a space are created using different types of architectural millwork: doors, windows, transoms, sidelights, moulding, trim, stair parts, and cabinetry to name just a few. The primary material used in millwork items today are most often produced from softwood or hardwood lumber. Other materials used in millwork products include MDF (medium density fiberboard), finger-jointed wood, composite materials, particle board and fiberglass.

The home is a wood framed building that had a concrete foundation added in 2006. Materials include mainly Douglas-fir for the wood, and a composite shingle roof. Details on the home include double hung windows, two chimneys, seven doors, and a catwalk that attaches to the neighboring woodshed. Architectural features include a corbelled chimney, crown moulding window casings, and on the porch are triangle shaped decorative wood brackets that are on top of the turned porch columns at the eaves.

Henry Shapland had been apprenticed to a cabinet maker in Barnstaple, before travelling to America in 1851 and learning about a wave moulding machine. Back in England he was joined by Henry Petter. By 1888 the Raleigh Cabinet Works were employing hundreds of workers from Raleigh and the surrounding areas when on 5 March 1888 a fire destroyed the factory. The factory was restarted at a new site on the River Taw, a former shipbuilding yard known as Bridge Wharf.

To process the thermoplastic polymers, Ensinger uses a number of production methods, in particular compounding, extrusion, machining, injection moulding, casting, sintering and compression molding. The spectrum of materials used ranges from engineering plastics (such as PA, PET and POM) through to the category of highly temperature-resistant high-performance plastics (such as PEEK, PPS, and PI). Thermoplastic polymer products are used in different fields, including the automotive and aerospace industries, mechanical engineering, medical technology, the electrical and semiconductor sectors and food industry.

The outside of the frame has stone quoining, and each bay is topped by a shouldered stone moulding. A stone cornice separates the entrance from the second floor, where a central window repeats the stone quoining, and is topped by a keystoned lintel. The school was built in 1925 at a cost of $20,000, and was the town's first purpose-built high school, housing grades 5 through 12. It was enlarged significantly in 1949, adding a wing with additional classrooms, gymnasium, and auditorium.

The porch is to the west of the nave, its walls also constructed of random rubble with uncoloured concrete block quoins. The western porch facade has a rectangular window with three lights, the outer casements of which open outwards while the central light is fixed. There is a narrow, upright slit in the stone wall above the window. The western facade of the nave has a circular window in-filled with fixed louvers and topped by a stone drip moulding.

But now, the scenario has changed a lot. When compared with the past, Indian Animation Industry has gained its foothold in the International space by investing more in technology, moulding eminent artists and developing better infrastructure in film making. As we can see now, there are numerous Animation Studios, VFX, Game development and Film making institutes providing several high-end educational programs all over India. Students are also interested in overseas education because of the increasing opportunities and decent pay scale.

The interior features delicately refined woodwork in its fireplace mantels, door and window moulding, and cornices, reflective of the style promoted by Robert Adam, which differentiated the scale of these elements in domestic and civic architecture. The gatehouse standing near the property entrance is an architectural folly. The house was built in 1803 for Joseph Manigault to a design by his brother Gabriel. Gabriel Manigault had studied architecture in London before the American Revolutionary War, and was familiar with Robert Adam's design principles.

He also contributed guitar, keyboards and occasional vocals during this period. However, he was absent from several tours, leaving and returning regularly until his final departure. According to the 2008 book The Fallen by Dave Simpson, Burns's repeated departures from the Fall were due primarily to his open resistance to Mark E. Smith's unorthodox leadership. To coax musicians into performing as he prefers, Smith was notorious for using a variety of "moulding" methods such as insults, silent treatment, and jostling musicians onstage.

The Hill Center Church is located in central Hill, a rural community north of Concord, New Hampshire, on the north side of Murray Hill Road between Currier and Dearborn Roads. It is a 1-1/2 story wood frame structure, with a gabled roof and clapboarded exterior. Its main facade is three bays wide, with a pair of sash windows on either side of the main entrance. The entrance is flanked by pilasters, which rise to blocks topped by finial-like moulding.

The South Danbury Christian Church is located in the rural village of South Danbury, on the east side of US 4 just north of its junction with Challenge Hill Road. It is a single-story wood frame structure, with a gabled roof and clapboarded exterior. A gabled entry pavilion projects from the front facade, which is unadorned except for the entry and pedimented gable. The entry is a double- leaf door, flanked by sidelight windows and framed by simple moulding.

The main facade is five bays wide, with a center entrance flanked by sidelight windows and pilasters and sheltered by a gabled portico. First-floor windows are topped by projecting cornices, and the main roof cornice has a line of dentil moulding. The house was built in 1790 to a design by William Sprat, a Connecticut designer whose residential credits include houses in both Connecticut and Vermont. The house was built by Colonel Henry Champion for his son, also named Henry.

The CD and LP versions feature different mixes of the lead-off track, "High Noon," with alternate bass and drum performances from Colin Moulding and Michael Urbano. Natural Causes, the followup to "Magic Act," was released in 2018 as a joint release between Gare du Nord (UK) and Beehive Sound (US). The album was also released in Spain in 2019 on the Rock Indiana label. Berliner Grotesk, the third album in Barbeau's Transfiguration Trilogy, was released in 2019 on the Pink Hedgehog label.

The boats are also incredibly easy to sail single handed as well. However, when sailing with more than two people the boat does tend to sit quite low in the water and does affect the performance of the dinghy. The Otter was originally designed by George O'Brien Kennedy for G.R.P. Moulding, and was first produced in the mid 1960s by John Baker, Kenton Forge Ltd. The production was moved at least once, with later boats being produced by Chris Clarance Marine, Shaldon, Devon.

Headquarters of Videoton in the city of Székesfehérvár, Hungary. Videoton is a regional, integrated Contract Manufacturing company being the 6th most significant European EMS provider and 35th largest globally. It is a multi- commodity supplier of parts, sub-assemblies, modules, complete products and equipment based on its in-house electronics, plastic injection moulding, stamping, machining, tooling and surface treatment operations. The group contains 19 specialized medium-sized subsidiaries which mainly supply the Automotive Industry, Household Appliances and Industrial Applications markets.

The windows were topped by similar caps without moulding. The house was built in 1812 for Stephen Grannis, and is a good vernacular expression of Federal period architecture. Family tradition states that this house, and a similar one at 1137 West Street, were both built by Grannis' father for his two sons on the occasion of their marriages. It remained in the hands of Grannis' descendants, part of the locally significant interrelated Grannis, Andrews, and Tolles families, until the late 20th century.

The dome roof of the lantern is clad with copper tiles and surmounted by a Latin cross. The faces of the tower feature double round arched openings separated by twisted columns on the first floor and thin slit windows on the floor above. A repeated arched moulding forms a cornice mould around the top of the second floor of the tower The principal entrance to the tower is from the western face. There is a double timber door, flanked by twisted columns.

He said that Aadesh has certainly worked very hard in moulding both the singers. The others were not very impressed but said that it was OK. Jatin-Lalit said that Nihira did not perform that well because they all have a lot of expectations from her. Everybody was of the opinion that Irfan was good. Ismail praised Vineet for his improvisations, which got Jatin in action, saying that the contestants should try to sing the song properly first and then try improvisation.

Also in England, the scale model company, Airfix produced a variety of high quality plastic sets, which were frequently painted by hobbyists. Many Airfix figures were imitated by other companies and reproduced as inexpensive, bagged plastic army men. Timpo Toys, Britains main competitor in terms of sales and quality in the 1960s and 70s developed the 'Over - Moulding' system. Different coloured plastics were injected into the mould at various stages, creating a fully coloured figure without the need of paint.

Molyneux's globes were the first to be constructed in such a way that they were unaffected by humidity at sea. They were made of flour-paste, an unusual material for the time. Simon Forman remarked that Molyneux's moulding or casting process was "the only way to caste [anything] whatsoever in perfecte forme ... and yt is the perfectest and trewest waie of all wayes ... and this was the wai that Mullenax did use to cast flowere [flour] in the verie forme".

This is the first time that the name of an Irish river has been used for a class of RNLI lifeboat. After boatyard acceptance in March 2012 the first of the fleet went through sea acceptance trials in 2012. Early hulls were moulded by SAR Composites and up to ON1318 were fitted out by Berthon Boat Co. of Lymington. From ON1319 fitting-out progressively switched to the RNLI All-Weather Lifeboat Centre (ALC) at Poole, to which hull moulding also transferred from ON1330.

In 1913, a long axe from the same cultural horizon was discovered on Brattland in Utskarpen. The axe is a "boat- axe" of Swedish-Norwegian type from about 2800--2400 BC. It was not a functional tool, but rather a dignity symbol of worthiness and a high social class. It may have belonged to a local chieftain. The stripe on the backside of the axe resembles an edge from moulding, and is an imitation of moulded axes in bronze from Skåne or Denmark.

Lainshaw Castle was described by Pont in 1608 as 'a stronge old Dunijon'. In the present structure most of the ground- floor walls and the face of the south-east wall to a height of over belong to the original castle. Two small ground-floor windows and a larger third-floor window with roll moulding are prominent among features remaining. The surviving walls have been pierced by various doorway, providing access to later structural additions, with some subsequently being blocked.

32 . Statue at the summit, photograph taken about 1869 For reasons of cost and weight, copper was chosen as the medium for the statue. A very new method for the time was adopted to realize of the statue: galvanoplasty, a type of electroplating, or "the art of moulding without the help of fire" was chosen over hammered copper. A scientific report of November 19, 1866 said that electrotype copper allowed an "irreproachable reproduction" and a solidity that left nothing to be desired.

The interior has offices opening off a cental hall and has timber walls, ceiling and floor. A large sales counter sits in the front room, which has three quarter height partition walls clad in tongue and groove boards with some weatherboard cladding. Few interior fittings are present, these include two fixed safes and some shelves and drawers. The Moulding Shed and Borax Plant extends well into the road reserve area beside the modern bitumen road at the front of the complex.

The badge was originally introduced in 1963, featuring the blue ship logo on a white plastic shield inspired by the ship from Disney's Peter Pan. This design remained unchanged until the 1990s when a revised badge featuring a raised moulding of the ship design by Tony Hart was introduced (more detailed and neater than the previous printed reproduction). This version disappeared in 1997 when the old-style badge returned. In 2004, coinciding with the show's September revamp, a new badge design was introduced.

Monitor is a British arts television programme that was launched on 2 February 1958 on BBC and ran until 1965. Huw Wheldon was the editor from 1958 to 1962. He was also the principal interviewer and anchor until 1964. Wheldon set about moulding a team of talents, including W. G. Archer, Melvyn Bragg, Humphrey Burton, John Berger, Patrick Garland, David Jones, Peter Newington, Ken Russell, John Schlesinger, Nancy Thomas, and Alan Tyrer Monitor ranged in subject over all the arts.

"King for a Day" is a song written by Colin Moulding of the English rock band XTC, released on their 1989 album Oranges & Lemons. It was the third single from the album, and reached number 89 on the UK Singles Chart. The music video featured a cameo appearance from guitarist Dave Gregory's brother Ian, drummer of the Dukes of Stratosphear. Their performance of the song on Late Night with David Letterman marked the first time XTC played a live show in seven years.

This was abandoned and instead it was decided to gas-exchange air for nitrogen on the filler, and produce the inserts with a hole in place using straightforward and cheaper injection- moulding techniques. Commissioning began January 1988, with a national launch date of March 1989. This first-generation widget was a plastic disc held in place by friction in the bottom of the can. This method worked fine if the beer was served cold; when served warm the can would overflow when opened.

The Dukes of Stratosphear were an English rock band formed in 1984 by Andy Partridge, Colin Moulding, Dave Gregory, and Ian Gregory. Modeled after psychedelic pop groups from the 1960s, the Dukes were initially publicised by Virgin Records as a mysterious new act, but were actually an XTC spin-off band. They recorded only two albums: 25 O'Clock (1985) and Psonic Psunspot (1987). In the UK, the records outsold XTC's then-current albums The Big Express (1984) and Skylarking (1986).

Océanes Le Havre, No. 156, May 2012, p. 3 The machines are designed for Offshore wind power in Brittany, the UK, and Normandy. Other industries are dispersed throughout the Le Havre agglomeration: the Brûlerie du Havre, which belongs to Legal-Legoût, located in the district of Dollemard that roasts coffee, Sidel located both in the industrial area of Port of Le Havre and Octeville-sur-Mer designs and manufactures blow moulding machines and complete filling line machines for plastic bottles.

" "Shake You Donkey Up" is a hoedown whose narrator is portrayed as a jilted lover. Although the lyrics appear nonsensical, they are an autobiographical rumination on "unenlightened attitudes about women ... as mothers to be bullied or girlfriends who are going to get drunk and attack you." Partridge instructed Moulding to have the bass sound like the 1972 Jimmy Castor Bunch song "Troglodyte (Cave Man)", "a great crunching bass line. So it's a homage to Jimmy, a sort of memory lift.

Above the entrances are a three-part window on the second floor, and a three- part Palladian window in the third floor. Windows in the other bays are set in groups of one to three, topped by splayed lintels with keystones. The cornice is dentillated and decorated with egg-and-dart moulding. The building was built in 1917, a time when the Asylum Hill neighborhood had ceased to be the city's fashionable upper-class area, and was becoming more middle class and commercial.

The puteal—wellhead is a cylindrical drum 50 cm by 106 cm and dates to circa 30-10 BC. It is part of a commemorative memorial in the city of ancient Corinth, which at that time had recently been refounded by Augustus's adoptive father Julius Caesar, that celebrated Augustus's victory at the battle of Actium. Work is ongoing to locate the likely original site of the monument from which it came, perhaps even with part of its missing moulding restored.

To prepare himself for the foreseeable managing role he moved from department to department, from machine shop to drawing office, from moulding loft to building yard, and gained experience in all aspects of the business.Angus Mac Kinnon:Messrs. A. & J. Inglis of Pointhouse - Shipbuilders and Engineers In 1867 he married Agnes Denny, a daughter of the famous Dumbarton shipbuilding family. In 1884 after the death of his father he took over the management of the family owned shipyard A. & J. Inglis.

He returned to Denmark in 1781 and was in 1783 admitted as member of the Academy. His admission piece was an allegorical representation of the Baltic Sea in the form of a reclined figure. It was difficult times for a young sculptor since the few major commissions all went to Wiedewelt, and Dajon, therefore, had to survive on a small income by teaching moulding at the Academy's decoration school. In 1803, after Wiedewelt's death, he was finally appointed as professor at the Academy.

John Bacon was born in Southwark on 24 November 1740, the son of Thomas Bacon, a clothworker whose family had formerly held a considerable estate in Somersetshire. At the age of fourteen, John was apprenticed to Mr Crispe's porcelain manufactory at Lambeth, where he was at first employed in painting the small ornamental pieces of china. His great skill at moulding led to his swift promotion to modeller. He devoted the additional income to the support of his parents, {then in straitened} circumstances.

Above this are two more steps, each capped with cyma recta moulding. On the front face of each step is a leaded marble plaque. The pedestal itself comprises recessed square plates with leaded marble plaques on each face bearing the names of the 37 local soldiers who died in the First World War, including two who died in camp. There are also leaded plates listing those who fell in later wars; two in the Second World War, and one in the Korean War.

For a metal matrix material such as titanium foil, the melding event is a fusing at high pressure and a temperature near the melting point. For many moulding methods, it is convenient to refer to one mould piece as a "lower" mould and another mould piece as an "upper" mould. Lower and upper refer to the different faces of the moulded panel, not the mould's configuration in space. In this convention, there is always a lower mould, and sometimes an upper mould.

The Guide, Pali Text Society There are 8 sections as follows: #Ariyasacca Pakasana (display of the Noble Truths) #Sãsana patthãna (pattern of the dispensation) #Suttãdhitthãna (terms of expression in the thread) #Suttavicaya (investigation of threads) #Hãravibhanga (modes of conveying in separate treatment) #Suttatthasamuccaya (compendium of the thread's meaning) #Hãrasampãta (modes of conveying in combined treatment) #Sutta vibhangiya (Analyses of Suttas) However, the translator says this last title is a mistake for "moulding of the guidelines", the title given at the end.

Valérie Blass (born 1967) is a Canadian artist working primarily in sculpture. She lives and works in her hometown of Montreal, Quebec, and is represented by Catriona Jeffries, in Vancouver. She received both her Bachelor of Fine Arts and Master of Fine Arts, specializing in visual and media arts, from the Université du Québec à Montréal. She employs a variety of sculptural techniques, including casting, carving, moulding, and bricolage to create strange and playful arrangements of both found and constructed objects.

St. Nicholas church was built in cubist style. The planning structure base is the cuboid shaped space of 10m x 10m x 10m, crowned with an onion shaped dome and surrounded with a massive protruding moulding prominent in cubist architecture. The three-level hand-crafted oak iconostasis was transferred from the old 19th century Orthodox church to the new one. The Russian Orthodox church is unique in its architectural use of cubism in Telšiai region and in the whole of Lithuania.

It was also outside the legal boundary of London. Among the group was John Peers, a molten metal and moulding specialist, but on 18 May 1697 he appeared before magistrates on an unrelated charge, and denounced Chaloner's Egham operation as part of his plea. Newton heard about this by accident three months later so arrested Peers for questioning and then recruited him as an agent. Peers rejoined Holloway in Egham and produced 18 forged shillings, enabling Newton to arrest Holloway for coining.

The entire carbon-fiber monocoque chassis ("tub") of the car weighs . Front and rear aluminum subframes combine with the tub, roof reinforcements and engine mounting to comprise the 4C chassis giving the vehicle a total chassis weight of and a total vehicle curb weight of just . The 4C has a single carbon fiber body, similar to the body of many supercars. The outer body is made of a composite material (SMC for Sheet Moulding Compound) which is 20% lighter than steel.

The south transept has a parallel east wing. Tomb of Thomas Bowater Vernon, of Hanbury Hall, outside the Vernon Chapel The vestry and transept house the Vernon Chapel which has a transept gable end and a central pointed doorway with nookshafts and an outer dog-tooth and an inner rosette moulding. Above is a three-light window with hood mould and foliated stops. The adjacent gable end has at its base a gabled monument to Thomas Bowater Vernon (died 1859).

Social software generally refers to software that makes collaborative behaviour, the organisation and moulding of communities, self-expression, social interaction and feedback possible for individuals. Another element of the existing definition of social software is that it allows for the structured mediation of opinion between people, in a centralized or self-regulating manner. The most improved area for social software is that Web 2.0 applications can all promote cooperation between people and the creation of online communities more than ever before.

District hospital The economy is divided evenly over various fields, thus contributing to a very good regional labour situation. Established in Frankenberg are, among others, the famous furniture factory of the Brothers Thonet, a plant belonging to the injection moulding firm Hettich and the Bundeswehr's Electronic Warfare Battalion (Bataillon Elektronische Kampfführung) 932. The biggest employer in the area is the heating technology manufacturer Viessmann in Allendorf. For the last 25 years, one technological focus has been formed by plastics technology.

The Captain John Oliver House is a two-story building with clapboard siding. Greek Revival elements include corner pilasters with simple entablatures topped by gable-end pediments, dog-eared window moulding, and a front door flanked with small pilasters, a transom window, and sidelights. There is also an arched Gothic Revival window in the center of the front gable. The house has been expanded with a front porch and additions to the side and rear, but retains its original architectural features.

Virgin rejected Eno's advice, and the group instead returned to Abbey Road with Leckie. Andrews appeared at the sessions with several original songs, but Partridge did not feel they were right for the band. He began taking Moulding and Chambers out for drinks without inviting Partridge, allegedly in an attempt to take over the group. After most of Andrews' songs were dropped from the final track list, the keyboardist told journalists that he foresaw the band "explod[ing] pretty soon".

In later years, the album became the best-known of XTC's discography and Moulding and Partridge would look back on this point as the symbolic start of the band's career. upright=1.3 To follow up "Nigel", the band released "Wait Till Your Boat Goes Down" (1980), a reggae-influenced Partridge song with production by Phil Wainman of Bay City Rollers fame. It was their lowest-selling single to date. Concurrently, Virgin issued Moulding's "Ten Feet Tall" as the band's first US single.

' ... Mummer signaled a strange rebirth for XTC." Moulding thought that "when we came back from America after our aborted tour of 1982 ... people like Spandau Ballet had moved onto the scene; new groups were coming up and there was no place for us." Mojo journalist Chris Ingham summed up the period: "In 18 months, XTC had gone from Top 10 hits and critical superlatives to being ignorable, arcane eccentrics. 'Your average English person probably thinks we split up in 1982,' suggests Partridge.

Gregory played for Johnny Hates Jazz, Marc Almond and Francesco Messina whilst producing for Cud. Moulding performed a special event concert with David Marx and the Refugees, a Swindon-based band that reunited him with Barry Andrews. A 17th-century map of Nonsuch Palace illustrated by cartographer John Speed, which served as the basis of the album cover. Tarquin Gotch, who served as XTC's manager for a short time, helped the band reach a legal settlement with Ian Reid in 1989.

Gregory quit the band whilst in the middle of sessions due to personal issues and discord with his bandmates. Partridge told journalists that Gregory left because he grew impatient with the recording of the orchestral material and wanted to quickly move on to second project, which would have consisted of rock songs. He attributed Gregory's frustration to diabetic mood swings, as did Moulding. Gregory denied that his leaving pertained to "musical differences", and that it was moreso "personal problems" related to Partridge.

"One of the Millions" is a song Moulding addressed to himself and his tendency to take the paths of least resistance. Its bass riff evoked to him the feeling of a rocking boat and it is one of the few songs on the album that was cut live without a click track. "Scarecrow People", built on a "horsey" rhythm, is cited by Partridge as his favourite on the record. It was written as an outlet for his longtime fascination with the word "straw".

The Arad Alexander House stands in a densely built residential area southeast of downtown Worcester, on the north side of Waverly Street between Providence and Coral Streets. It is a two-story wood frame structure, with a front gable roof. Its main block follows a side hall plan, and the front facade is a full temple front, with Corinthian columns supporting a full entablature and triangular pediment adorned with modillion blocks. The front windows are topped by moulding with consoles and hoods.

The house from the side The home features a large front porch with columns supporting the overhanging roof, supported by brackets and complemented by dentil moulding, and balcony above, accented by a Palladian-style leaded-glass window. The shake roof is interrupted by large dormers, three chimneys, and a widow's walk. The frieze above the second-floor windows are decorated with ornamental swags. The cherry front door is topped by a leaded glass transom and flanked by leaded glass sidelights.

Tan took on the role of Minister for Trade & Industry from 1981 to 1986. He was also appointed Minister for Finance (1983–85), and Minister for Health (1985–86). Tan espoused a cut in the Central Provident Fund (CPF) in the 1980s, which Prime Minister Lee Kuan Yew had said would not be allowed except "in an economic crisis".Kernial Singh Sandhu and Paul Wheatley, Management of Success: The Moulding of Modern Singapore (Institute of Southeast Asian Studies, 1989), pp. 69.

At this time, the idea for a Legoland amusement park in Rotkreuz, in the canton of Zug, was raised. However, the project could not be implemented because the farmers concerned in Rotkreuz were not willing to sell their land. At the beginning of 2000, the Lego Group closed its factory in the USA and withdrew the external production of the watch series "Lego-Watch". All the injection-moulding machines from the discontinued operations were integrated into the Lättich and Neuhof factories.

The badly damaged coats of arms have been retouched,Dhanens (1980), 242 while the frames have sustained impairment and are overpainted in areas. The painting was taken to Moscow after the Second World War. It was returned in 1959 after it had been cleaned, restored and underwent examination in a laboratory. This process revealed the ALC IXH XAN inscription on the inner moulding of the central frame in front of the tiled floor when a coat of brown paint was stripped away.

Windows are set in rectangular openings, with sandstone sills and lintels. The street-facing gable facade has two windows, while the south-facing facade has the entrance at the left end, and three windows to its right. The door opens into a small vestibule, which has had a closet partitioned off the far end, with the balance of the building occupied by the classroom. The vestibule is finished in tongue-and-groove wood boards, while the main chamber is plastered, with wide moulding.

A double- leaf door is topped by a line of dentil moulding, above which is a triangular stained glass window. The second stage of the tower above the entrance is simple, with narrow pointed-arch window on three sides and slender corner pilasters. Above this is a section of pyramidal roofing, finished with wood shingles, some of which are decoratively cut. An open belfry stands above that, each side of the square tower consisting of a pair of pointed-arch openings.

The interior of the narthex features remains of Norman arcading and a common rafter roof. The doorways through the east and west walls of the tower are perpendicular with the one on the west having carvings of a bishop and a king in the moulding over. The north and south sides of the nave are divided from the aisles on each side with early 13th- century arcades of three bays on short circular piers. The chancel arch is early perpendicular.

The house's exterior is complex; typical for Queen Anne houses. Key exterior features include a tower capped by a conical roof, bay windows, high gables with decorative woodwork, carved brackets and moulding, and a wraparound porch with grouped turned columns and spindlework valances. The home contains 20 intricately detailed rooms. Interior architectural elements include pocket doors, non-rectilinear walls and ceilings, detailed mantels, an intricate main stair with gas lamps placed on top of carved newels, and Victorian woodwork detailing throughout.

The F.M. Jordan House stands in a residential area south of Auburn's downtown, on the east side of Laurel Street. It is a 2-1/2 story wood frame structure, with a mansard roof providing a full third floor. A three-story tower, also topped by a mansard roof, projects from the center of the west-facing front facade. The roof eaves are studded with brackets and dentil moulding, and the transition between the roof faces has a shallow cornice.

Actuation of the flaps, dive-brake and undercarriage was provided using electric motors delivering power via flexible shafts and Lear electric motors. The nose of the Paris contained much of the avionics and electrical systems, including the radio, alternators, batteries and motors. Access to the engines was provided via a completely detachable tail unit; the wings could also be similarly detached without the necessity of removing the undercarriage. The sizable main canopy was a one-piece moulding, being 8 mm (0.3 lin) thick.

Maurice Clifford Williams (26 June 1926 – 3 July 2004) was an Australian politician who was a Liberal Party member of the Legislative Assembly of Western Australia from 1962 to 1973, representing the seat of Bunbury. Williams was born in Perth, but educated primarily in country Western Australia, attending Eastern Goldfields High School. He went on to study metal moulding at Perth Technical College, and eventually started a foundry in Bunbury.Maurice Clifford Williams – Biographical Register of Members of the Parliament of Western Australia.

Ceramic forming techniques include throwing, slipcasting, tape casting, freeze-casting, injection moulding, dry pressing, isostatic pressing, hot isostatic pressing (HIP), 3D printing and others. Methods for forming ceramic powders into complex shapes are desirable in many areas of technology. Such methods are required for producing advanced, high- temperature structural parts such as heat engine components and turbines. Materials other than ceramics which are used in these processes may include: wood, metal, water, plaster and epoxy—most of which will be eliminated upon firing.

His reputation rests largely on the part he played, as a man of influence in society and in moulding public opinion on literary matters, in connection with his large circle of talented friends. He secured a pension for Tennyson, helped to make Ralph Waldo Emerson known in Britain, and was one of the earliest champions of Algernon Charles Swinburne. He helped David Gray by writing a preface for The Luggie. He helped to obtain a job for Coventry Patmore at the British Museum.

Granted, Henry killed him at Oberndorf, on the Danube, near Regensburg, and cut off his head. He nevertheless accepted the new circumstances and joined the side of the recently crowned Emperor Otto IV, whose closest advisor he became, arranging Otto's marriage with Philip's daughter Beatrice and moulding an aggressive Sicilian policy. After the December 1212 coronation of Henry VI's son Frederick II, however, Otto's position worsened and the marshal returned to the Hohenstaufen fold. He is last documented in 1214 deeds.

An example of a silicone rubber keypad typical of LSR (Liquid Silicone Rubber) moulding Room-temperature vulcanizing (RTV) silicone is constructed of reactive oil-based polymers combined with strengthening mineral fillers. There are two types of room- temperature vulcanizing silicone: # RTV-1 (One-component systems); hardens due to the action of atmospheric humidity, a catalyst, and acetoxysilane. Acetoxysilane, when exposed to humid conditions, will form acetic acid. The curing process begins on the outer surface and progresses through to its core.

Office in queue The attraction features a stand-by, Fastpass+, and a single-rider line. The queue starts at the office of the fictional "Himalayan Escapes" travel agency, progressing to a replica temple with little holy figures. Visitors next enter a tea garden, followed by a room with equipment from a successful expedition, and then the "Yeti Museum", which contains information on the Yeti and a moulding of a Yeti footprint. There are also about 8,000 artifacts brought from the Nepal trip in the museum.

The hotel displays characteristics of Inter-War Mediterranean/Spanish Mission style of architecture, with arched openings, supported on pre-cast concrete twisted columns, first floor balconies, a central Dutch influenced gable, steel framed windows and arched entry supported on masonry columns. A balcony in the gable has a round arched opening with concrete moulding, and a juliet balcony with wrought iron tracery between the concrete balustrades. The bottle shop has rendered and painted masonry walls, with a distinctive asbestos clad butterfly roof and steel framed windows.

The pretty Tudor revival style is reminiscent of > contemporary churches and schools designed by the same architect, then > County Surveyor of Antrim. The middle and wing bays of the symmetrical five- > bay front project slightly and have tall double-shouldered gables with > curious finials like inverted gate posts. Beneath the datestone the central > front doorway has a four-centred arch, recessed surround, and a hood > moulding with big cabbage-like bosses all dulled by dark paint. The > intermediate bays have square windows with plain chamfered frames.

They are not nursery rhymes, but penned and tuned to Carnatic music with the objective of moulding children," said Devika Raman, daughter of Sadagopan. When Soundaram Ramachandaran, a Minister in Jawaharlal Nehru’s Cabinet, launched the Gandhigram Rural Institute (GRI), she appointed Sadagopan as the Director of Music Studies. "When Nehru visited the institution in 1959, he got a chance to watch the Kuravanji dance-drama of Sadagopan. So impressed was Nehru with Sadagopan’s talents that he appointed him as Professor of Music in Delhi University.

The reason for this elevation was to make sure the mosque was not soiled by pack animals which were kept by merchants on the ground floor. Under the mosque, at ground level, is a fountain and washing area for ritual ablutions. The han is entered via a monumental stone and brick portal which projects from the rest of the building's facade. The portal is decorated with a spiral moulding along its edges and patterns of inset coloured tile on its spandrels above the archway.

At that time, it was thought that this was the location of the sentencing of St. Lawrence, Deacon and Martyr to death by the Prefect of Rome, hence its dedication. Christianization accounts for the survival of the cella and portico of the temple through the centuries, though it did not preserve the edifice from all damage. Originally, the podium was faced with white marble slabs, with matching marble mouldings at the top and bottom. Most of the marble facing was scavenged, except for the moulding.

The TFM increased considerably as the alcohol content fell during drying. The concave shape of the soap is formed by shrinkage while the soap is drying, and is not due to deliberate moulding. The entire Pears plant was a small almost self-contained annexe at the rear of the administration block. It was run by a handful of staff, who not only had experience of the specialised process, but had developed immunity to the effects of breathing the alcohol-laden atmosphere in the building.

Kai Nielsen was born on 26 November 1882 in Svendborg, the son of Christian Nielsen, a watchmaker, and his wife Ane Marie. At 15 he became an apprentice painter but was artistically inclined and began to paint landscapes and portraits. At the same time he studied at the technical school in Svendborg where he was taught moulding by Edvard Eriksen, later famous for creating The Little Mermaid in Copenhagen. In 1901 he moved to Copenhagen and took drawing classes to prepare for the Art Academy.

The 1-3/4 story wood frame house was built sometime in the 1820s, and is a well-preserved side-hall entry Greek Revival house with a 1-1/2 story wing. It has wide corner boards supporting a fascia with dentil moulding. The main entry is flanked by sidelight windows and pilasters supporting a full entablature; a side entrance in the wing is similarly styled except for the windows. The house was listed on the National Register of Historic Places on March 13, 1987.

Garthmyl Hall with the Gold/Naylor Coat of Arms in terracotta set in the pediment One of the earliest architects to make use of this source was the Welsh architect Thomas Penson, who worked from offices in Oswestry. There appears to be good evidence that he sourced his terracotta from the brickyards which were associated with the Oswestry coalfield at Morda and Trefonen on the Welsh border."Stratton", (1993). pg. 51 Penson used terracotta moulding for church architecture, most notably St Davids, Newtown and Christ Church, Welshpool.

The ground-floor shop windows are all flanked by pilasters and topped with moulding detail including a keystone-like feature that reaches the string course. The mullioned and transomed first-floor windows have horizontal heads with brick keystone detailing. The two attic storeys each have a row of circular dormer windows in the steep roof, the lower set being decorated below with festoons of fruit and flowers, which differ in detail from window to window. The drainpipe heads are all inscribed with 1911 in a lozenge pattern.

Krebs was born on June 27, 1847, in Lolland, Denmark, to Hans Peter Tholstrup Krebs and Johanne Louise (Wichfled) Krebs.Derby, George (1967). The National Cyclopaedia of American Biography Being the History of the United States as Illustrated in the Lives of the Founders, Builders, and Defenders of the Republic, and of the Men and Women Who Are Doing the Work and Moulding the Thought of the Present Time. New York City: James T. White & Co.. pp. 14–15. . He emigrated to the United States in 1879.

The roof is partially concealed by the Quay Street facade which extends beyond the line of the roof and on the long elevations by simple parapets. The Quay Street facade of the building is symmetrically composed and dominated by a cantilevered awning running along the entire face and interrupting the composition. The facade comprises a central section with decorative, curved parapet profile, capped with a decorative moulding. The face of the parapet has the lettering "EDWARDS CHAMBERS" painted centrally and the number of the building above.

Like the original version, the Aurion continues to offer differing frontal design treatments across the range. From side, the rehashed design is identified by the deletion of bodyside moulding strips and a range of new wheels designs, including the standard fitment of alloy wheels on the base-line AT-X. Interior upgrades in the form of new colour combinations are featured, along with upgraded instruments and gauges giving greater turn signal and warning-signal clarity. Revised audio systems, lighting and in-cabin storage are also featured.