Sentences Generator
And
Your saved sentences

No sentences have been saved yet

92 Sentences With "work table"

How to use work table in a sentence? Find typical usage patterns (collocations)/phrases/context for "work table" and check conjugation/comparative form for "work table". Mastering all the usages of "work table" from sentence examples published by news publications.

He went over the coat meticulously at his work table.
Behind that is a work table with painting supplies and a sharpening machine.
My work table is one that I built out of an old door.
A Mission style desk from the early 1900s is the main work table.
These shots shows some of my work, my work table, and work zones.
I use a work table as a desk because it's better for collaborating.
At my work table, in my easy chair, in bed and on the plane.
A formerly cream-colored rotary telephone sits on his work table, splattered with colored paint.
Dinrah stood near a scarred work table and rolled a brand through a blue-hot flame.
We like: The Living Room (lobby) with its various seating areas, communal work table, and fireplace.
This is a perspective I take with me when my attention returns to my work table.
The players, wearing their own street clothes, are onstage, with a plastic work table and some chairs.
Visible at the left is a corner of a large work table used for drawing and small paintings.
A modern tall work table is for smaller works on paper, paints and various tools of the trade.
Photos of both of her parents, together and separately, hang next to her work table in her studio.
Men playing after-work table tennis at a park complain about the price of rice and building materials.
Most of my work is created while sitting at the work table in the center of the photograph.
Below the window on the left is a work table where I cut stencils, with handy drawers for storage.
My work table and supplies can be seen along with a large stretcher I just built, ripe for stretching.
Tatami mats become makeshift bridges across koi ponds, but the fish swim above the futon and the low work table.
There's a standing work table with paper storage underneath at one end, and a paper guillotine table at the other end.
I paint on paper on both side walls and have a work table for working on smaller pieces in the center.
I use a few big clamp lights to light my work table and the wall that I pin work up on.
My work table and some storage are to the left with more storage in the space above the bathroom and closet.
Mr. Shear pointed to the artist's main work table, with a notebook open to thumbnail sketches of four joined-panel paintings.
Top left is a photo of my heavy-duty work table where I stand for hours carving, printmaking and prepping canvases.
His work table is covered in butcher paper stuck down with yellow tape; the floor is a speckled, unintentional Jackson Pollack painting.
Storage crates double as tables, permanent tables have storage under the work surface, and boards on sawhorses make a temporary work table.
A eight-foot-high photograph of his daughter as a toddler (she is now 16) fills the wall opposite his work table.
The large rolling work table/paint storage sits in the center of the room and is home base for everything I work on.
In between, classic comic covers, iconic movie scenes, cartoons, landscapes, memes, and fine art all got the pixel treatment on my work table.
Next to his work table sits a chair that once had its home in Estonia's first government building, where his great-aunt was employed.
She walked through aisles of bric-a-brac and nodded to a deer's head similar to one in her picture of his cluttered work table.
The work Waters owns, which occupies a small, windowless chamber that he calls his ''John Wayne Gacy Attic,'' is titled ''Work Table # 7, Baltimore'' (21).
In the intimate glass-roofed space, Colantonio stands attaching cloth-covered electrical cables to the rainbow-colored cluster of lights at his tall wooden work table.
I keep a small work table to my left where I sketch and collect the daily mail and a work cart to my right for palette and paints.
One recent afternoon, wearing a blue Donna Karan dress, a Vogue Patterns design she picked up at the office sample sale, Ms. Payne sat at a work table.
Primarily made up of a cluttered work table and a plastic-covered painting wall, I shuttle between both when I am in the studio several days a week.
Atop her work table sat a book of photos from her youngest son's first year, two pairs of sunglasses, her journal and a tin of Dr. Martens Wonder Balsam.
The exterior house wall, visible in the photo's center, tops the white basement foundation wall with a long work table running back to the door joining the two spaces.
The father, a scientist, has a momentary revelation that prompts him to rise from the work table and reach for a pair of lab goggles that resemble today's VR headsets.
On his work table, there is a glossy pamphlet of black-and-white photographs of Ms. Stepanenko dancing "Giselle," made, he said, in honor of her 65th birthday, by the theater.
While she kept the home's original timber frame, she replaced the living room floor (which she said was disintegrating) and repurposed it into the work table that sits in her entryway.
In the greenhouse center is a moveable, two-sided wall; between is my palette and a work table; behind is flexible space currently being used to play with the installation of nearly completed paintings.
My very awesome table that I acquired when I moved in on the left is a large and very heavy work table for mixing, collaging, pouring, and sketching smaller paintings or works on paper.
Accessible only by foot on a steep, winding pathway camouflaged by thick vegetation, the ramshackle shop owned by I. Launa has a tattered tarpaulin roof, a work table and several machines for cutting and shaping steel.
To the right of that, along the right edge of the photo, is the work table where I work on "The Book of Umm," 1,300 gouache/watercolors so far in a series I've been doing since 2011.
A row of felt hoops on the wall that suggested steering wheels were, in fact, brims cut from hats, he explained, while a stack of around 20 old-time-looking driving hats — or flat caps — sat on a nearby work table.
It's a whimsical fantasy land of jewelry spilling out of drawers, hanging from chandeliers and coming together on her work table, where she makes everything herself by hand, setting semiprecious stones, mismatched beads and bird- and fish-shaped pendants using twisted wire.
Vladimir Teriokhin was sitting at a long work table in his 265,000-square-foot studio on 37th Street in Manhattan the other day, stapling his company ID along the top of sample blocks of a muted green yarn with complex stitches that have names like herringbone, basket weave, double chevron.
BUNDLE: DEWALT Compact Brushless Drill and Impact Combo Kit and IMPACT READY FlexTorq Screw Driving Set — $234.48 (list price $245.98) Black + Decker Drill/Driver Circular and Reciprocating Saw Combo Kit — $211.24 (list price $13) Compact Workbench Sawhorse Work Table with Clamps — $21 (list price $215) Dress right for the summer.
And from the looks of it, the hair pro used some serious styling mojo to achieve the high-shine effect: no fewer than six brushes (one customized with Shayk's name) and eight Aveda Smooth Infusion styling products were spotted on his work table, tapped to "make the hair look like glass," he said.
A. Your computer repair shop probably has a checklist of things to do before you drop off the laptop, but start by doing a full backup of your system so you have a copy of all your files in case something inadvertently happens when the machine is open on the work table.
In addition to cups and palettes full of bright primary pigments, the installation includes Míro's own mood board of inspirational clippings — among them a picture of Picasso and a photograph of a beach — a tile floor splattered with paint, and, on one work table, what looks like a large, blown glass bong.
Seafoam green and flamingo-pink walls frame a collection of both vintage and custom pieces, including chairs and benches from the São Paulo avant-garde artist Rodrigo Almeida, an old work table from a local boat-builder that Das reimagined as a dining table, raffia pendant lights and decorative silk saris from India and Africa that have been repurposed as curtains.
Work table, about 1840, Mahogany, modern velvet, modern wool, Great Britain, V&A; Museum no. CIRC.626-1969 A sewing table or work table is a table or desk used for sewing. Generally it has large amounts of space and a full set of sewing tools. Nearby there will be a chair and a waste bin.
Passengers aboard this class received free meals and refreshments, including alcoholic beverages. All seats were equipped with Audio-Video-On-Demand (AVOD), universal power-ports, a moveable reading light, a folding work table, and a swivel cocktail table.
Donald Duck arrives late to his job at Royal Bros. as a gift wrapper. He clocks in, uses a magnet to set the time back a few hours, then situates himself at his work table. Toys come zooming down past him, creating a whirlwind that strips his clothes off.
About 20% of the town's employed residents commute to New York City to work. Table 3. County and Minor Civil Division Commuting Flows for the United States and Puerto Rico: 2009–2013 from the 2009–2013 5-Year American Community Survey, United States Census Bureau. Accessed October 2, 2015.
The painting depicts the young Jesus assisting Joseph in his workshop. Joseph is making a door, which is laid upon his carpentry work-table. Jesus has cut his hand on an exposed nail, symbolizing the stigmata and foreshadowing Jesus' crucifixion. Some of the blood has fallen onto his foot.
The dimensions of the testing material must maintain proportionality. The specimen is placed on the work table and a notch is created exactly at the centre. The crack should be generated such that the defect length is about half the depth. The load applied on the specimen is generally a three-point bending load.
Roberts Rugh seated at a work table looking into a microscope. There are glass petri dishes in the foreground. Roberts Rugh began his professional career as a faculty member at Lawrence College (1927-1928) and went on to teach at Hunter College (1929-1939) and New York University (1939-1948) before moving to Columbia University.Rugh, Roberts.
By sheer hard work, mastery of details of each and every document he could lay his hands on, Bhupesh used to prepare for his parliamentary bouts. His work table was full of paper, all sorted out and classified. He was his own private secretary. He would never recommend an individual case, not to speak of favours.
Vertical movement, movement into the workpiece, and tilt. These are generally set statically, and left fixed throughout operations. The work table is a T-slotted X-axis table mounted on top of a radial fixture. Mounting the X axis on top of the radius table, as opposed to the other way around, allows for complex and accurate radius grinds.
There was a work table and vice, an office with the duty roster, regulations, operating instructions and other reference material as well as clothes lockers and washing facilities for the staff. Oil was kept in the cellar. Coaling was carried out by hand from coal bunkers. Coal was shovelled onto a platform and from there into the locomotive's coal tank.
"The NARA was so cooperative with the survey that it even provided the team with an exclusive work table. The survey team collected about 800 pieces of materials related directly or indirectly to the incident. The quantity of materials was enormous, reaching more than 10,000 pages of copies." In the midst of the international investigation, the team referred to truth commission cases in foreign countries for guidance.
A horizontal boring machine or horizontal boring mill is a machine tool which bores holes in a horizontal direction. There are three main types — table, planer and floor. The table type is the most common and, as it is the most versatile, it is also known as the universal type. A horizontal boring machine has its work spindle parallel to the ground and work table.
All seats are also equipped with a personal, on demand in-flight-entertainment (IFE) system, universal power-ports, a movable reading light, and a folding work table. Passengers also receive complimentary chef-curated meals, refreshments, alcoholic beverages, a Tumi Inc. amenity kit, premium bedding, and pre-flight Sky Club access. In August 2016, Delta announced the introduction of Delta One Suites on select widebody fleets.
A radius grinder (or radius tool grinder) is a special grinder used for grinding the most complex tool forms, and is the historical predecessor to the CNC tool and cutter grinder. Like the CNC grinder, it may be used for other tasks where grinding spherical surfaces is necessary. The tool itself consists of three parts: The grinder head, work table, and holding fixture. The grinder head has three degrees of freedom.
McCloskey also cleverly depicts the adventurously-rambunctious little Jane in his drawings of their mainland adventures; on every page, the robust tousle-headed toddler is usually shown to be exploringly bustling about independently of the two others in her group, engaged in "typical young tomboy" activities such as perching high up on a work-table, climbing on a stack of tires, snuggling with a furry puppy who has wandered into the garage, etc.
The work table is used to place and hold the measured piece. Its own volume, X, Y travel and carrying capacity are critical. Meanwhile, for the convenience of holding the workpiece, a precision rotary table, a V-block part holder and other accessories are generally added. Also, the projector must have a flexible and stable focusing mechanism and large working distance (the top surface of the workpiece relative to the lens pitch).
Productivity is enhanced when the operator cuts both while advancing and also while retracting the work table after adjusting the foam block after each pass for cutting. The DBDE execution blade can have a parallel or twisted 180 degrees welding. The twisted welding execution saves a grinding unit, as both edges pass the same grinding unit after two turns. It has been observed that a narrow width on a vertical band knife machine gives better dimensional accuracies on the foam block.
Apart from the Waterloo chair in the Royal collection, he had some other items made from the lumber: a minerals cabinet, a small table cabinet, a writing table, a work-table (owned by Anne Atkins), a chair, and a stand with the bark still on it, for a bust of Wellington. Some timber was given to others and they too had pieces made; these included a chair made for the Duke of Rutland and a wine cooler in the possession of Wellington College.
Automorphic functions then generalize both trigonometric and elliptic functions. Poincaré explains how he discovered Fuchsian functions: :For fifteen days I strove to prove that there could not be any functions like those I have since called Fuchsian functions. I was then very ignorant; every day I seated myself at my work table, stayed an hour or two, tried a great number of combinations and reached no results. One evening, contrary to my custom, I drank black coffee and could not sleep.
Furthermore, every trace of language has completely vanished: the papers strewn across the work table and floor in Büro (Office) (1995) have no text on them; the labels next to the doorbells that are the subject of Hinterhaus (2005) are variously colored but bear no names.Barry Schwabsky (October 21, 2009), A Makeshift World: On Thomas Demand The Nation. Demand cites Gerhard Richter and Ed Ruscha as sources of inspiration.Laura Barnett (April 25, 2011), Portrait of the artist: Thomas Demand The Guardian.
The designers then each occupy a large work table, and pull fabrics and supplies. The bulk of the pre-runway show overviews their designing and construction process, typically over two work days. The runway contest itself has a catwalk, and fully digitized floors and walls so each show has a different feel yet comes off as a professional presentation. During the show the judges comments are overheard; following the catwalk show the judges visit each entry, inspect the work, and ask questions of the designer.
Light flows from the arcuate side windows and the roofed glass lantern, which in Chapman's time lit up his big work table with different vessel models. On one corner, Sergel's bust of Gustav III was also a financial reminder. The northern part of the house was used as housing for the servants, and there were also economic spaces, while the kitchen itself was in the center of the house. During the rebuilding of the 1860s, the entire eastern and middle part were converted into housing.
The House that Jack Built draws its name from the famous children's rhyme, This Is the House That Jack Built. In this series, Massey intersperses the rhyme with his own lived experience and exploration of male sexuality. The opening image in his photographic suite shows a replica of Massey's Toronto studio with its filing cabinets, work table, stool and ladder to a loft. Overlaid atop this interior view is a montage of images that reflect on each verse of the rhyme, but with some unexpected twists.
He befriended the Norman painter Joseph-Désiré Court (1797–1865), also Prix de Rome, who in 1822 painted a portrait of Rifaut sitting at his work table in front of an open window on a landscape of the city of Rome. This painting is still kept in the Musée des Beaux-Arts de Rouen. On his return to Paris in 1824 he resumed his job as accompanist at the Théâtre of the Opéra-Comique before being appointed there head of singing and pianist répétiteur two years later.
Lucien Rosengart (11 January 1881 in Paris, France - 27 July 1976) was a French engineer. Lucien Rosengart at his work table by Edouard Vuillard His early life was shaped by carriages and the advance of the automobile age. He first started working as a mechanic at the age of 12, and by age 24 he had a machine shop in Belleville and several patents to his credit. By 1914 his products included railway parts, bicycle parts, and a rocket that allowed artillery shells to be exploded while airborne.
A balancing tilt is highly advantageous since the user automatically controls the tilting movements of the chair without having to think about it. The user can concentrate on his/her activities and does not have to bother with mechanical regulation of the chair. The chair follows the natural inclinations of the body and automatically stabilises at the body's selected sitting angles or at the angles that are required by the work task being done. The simplest way of verifying this is to try out one of his chairs in front of a work table during a normal working day.
On a vertical band knife machine usually a narrow width band knife blade is used, the most common width being 10mm. The length of the band knife blade depends on the supplier of the band knife machine. The dimensions are indicated on a small metal tag pasted or riveted on the machine. The vertical machine band knife blade is most commonly a "double bevel, double edge DBDE" execution to enable cutting while advancing the table and also while retracting the work table, while as the "double bevel, single edge DBSE" execution cuts only in one direction.
Just prior to moving north, the Langs sold some of their furniture, and the following advertisement appeared in The Australian: > "To be sold by Public Auction at the residence of Messrs. William and Andrew > Lang builders Elizabeth Street, on Wednesday December 29th, 1824, an elegant > assortment of Spanish mahogany furniture as follows: 1 set of Dining Tables > 14' long; 4 Pembroke Tables; 1 Card Table; 2 Tea Tables;1 Ladies work table; > 2 Chests of Drawers with wardrobe; Post and tent bedsteads etc., etc." Andrew and his father William took possession of the property on the Paterson River in 1825, but did not settle the land until 1826.
Video of optical fiber fusion splicing Fiber spliced, still unprotected INNO View 7 splicer on a tripod and work table Fusion splicing is the act of joining two optical fibers end-to-end.The goal is to fuse the two fibers together in such a way that light passing through the fibers is not scattered or reflected back by the splice, and so that the splice and the region surrounding it are almost as strong as the intact fiber. The source of heat is usually an electric arc, but can also be a laser, or a gas flame, or a tungsten filament through which current is passed.
Warshowsky demands Norma copy down the racist flier word for word in order to use it as evidence for government sanctions against her mill. When she attempts to transcribe the flier, management attempts to stop her, then fire her on grounds of creating a disturbance, and call the police to remove her from the plant. While awaiting the sheriff, Norma Rae takes a piece of cardboard, writes the word "UNION" on it, stands on her work table, and slowly turns to show the sign around the room. One by one, the other workers stop their mill machines, and eventually, the entire room becomes silent.
Blaisdell Hall is Pitt-Bradford's fine arts and communication arts building and is home to the broadcast communications, public relations, interdisciplinary arts, theater and music programs. The building features all- digital television and radio studios, a 500-seat theater, art studios, a music rehearsal hall, cutting-edge lighting and sound booths, music theory and technology studios, classrooms, and conference rooms. The building is also home to the KOA Art Gallery, which hosts various exhibitions of traditional and new genre arts. The Ceramics Studio houses all of the equipment needed to create ceramic masterpieces, including 16 motorized pottery wheels, a manual kick wheel, a work table and a kiln.
Most modern enlargers are vertically mounted with the head pointing downward and adjusted up or down to change the size of the image projected onto the enlarger's base, or a work table if the unit is mounted to the wall. A horizontal enlarger consists of a trestle, with the head mounted on crossbars between two or more posts for extra stability. A horizontal enlarger structure is used when high quality, large format enlargements are required such as when photographs are taken from aircraft for mapping and taxation purposes. The parts of the enlarger include baseboard, enlarger head, elevation knob, filter holder, negative carrier, glass plate, focus knob, girder scale, timer, bellows, and housing lift.
A striking feature of the exterior is the very large pine which became known as the Lawrence Tree. The writer frequently worked at a small table at its base and he expressed his love for it as follows: > The big pine tree in front of the house, standing still and unconcerned and > alive ... the overshadowing tree whose green top one never looks at ... One > goes out of the door and the tree-trunk is there, like a guardian angel. The > tree-trunk, the long work table and the fence!Lawrence, quoted in Maurer, > Rachel, "The D.H. Lawrence Ranch" In the summer of 1929, on one of her early visits to New Mexico, Georgia O'Keeffe visited the Lawrence Ranch.
Ever cautious, she wanted to eliminate misleading possibilities. Photographs of her Birkbeck work table show that she routinely used small molecular models, although certainly not ones on the grand scale successfully used at Cambridge for DNA. In the middle of February 1953, Crick's thesis advisor, Max Perutz, gave Crick a copy of a report written for a Medical Research Council biophysics committee visit to King's in December 1952, containing many of Franklin's crystallographic calculations. Since Franklin had decided to transfer to Birkbeck College and Randall had insisted that all DNA work must stay at King's, Wilkins was given copies of Franklin's diffraction photographs by Gosling. By 28 February 1953, Watson and Crick felt they had solved the problem enough for Crick to proclaim (in the local pub) that they had "found the secret of life".
Petitioner English, a laboratory technician at a nuclear facility operated by respondent General Electric Company (GE), complained to GE's management and to the Federal Government about several perceived violations of nuclear-safety standards at the facility, including the failure of her co-workers to clean up radioactive spills in the laboratory. Frustrated by GE's failure to address her concerns, English on one occasion deliberately failed to clean a work table contaminated with uranium during an earlier shift. Instead, she outlined the contaminated areas with red tape to make them conspicuous and, a few days later, called her supervisor's attention to the fact that the marked-off areas still had not been cleaned. Shortly after work was halted for inspection and cleaning of the laboratory, GE charged English with a knowing failure to clean up radioactive contamination, temporarily assigned her to other work, and ultimately discharged her.
It resembles a specialized species of milling machine that provides tool and die makers with a higher degree of positioning precision (repeatability) and accuracy than those provided by general machines. Although capable of light milling, a jig borer is more suited to highly accurate drilling, boring, and reaming, where the quill or headstock does not see the significant side loading that it would with mill work, the result is a machine designed more for location accuracy than heavy material removal. A typical jig borer has a work table of around 400 x 200 mm, (16 x 8 inch) which can be moved using large handwheels (with micrometer-style readouts and verniers) on particularly carefully made shafts with a strong degree of gearing; this allows positions to be set on the two axes to an accuracy of 0.0001 inch (2.5 micron). It is generally used to enlarge to a precise size smaller holes drilled with less accurate machinery in approximately the correct place (ie with the small hole strictly within the area to be bored out for the large hole).
Still life paintings was represented by "Chromatic Volumes Planes" (Russian Museum) by Natan Altman, "Painting of Porcelain" by Zaven Arshakuni, "South Still Life" by Evgenia Antipova, "Still Life with a Tray" by Olga Bogaevskaya, "Still-life with Flower and Drapery", "Still-life with Log" by Alexey Karev, "Work Table", "Still-life with Persimmon" by Maya Kopitseva, "Winter Morning" by Elena Kostenko, "Still-life", "Green Still-life" by Gevork Kotiantz, "Guitar with Porcelain Cat", "Guitar, Jug and Apples", "Paper Flowers and Shell" (all Russian Museum) by Vladimir Lebedev, "Still-life. Pears" by Gavriil Malish, "Guitars" by Evsey Moiseenko, Still-life by Andrei Mylnikov, Still-life with Balalaika by Sergei Osipov, "Bird Cherry in a glass", "Herring" (both Russian Museum) by Kuzma Petrov-Vodkin, "Jugs on the Red table-cloth", "At the Window" by Valentina Rakhina, "Night Still-life" by Vladimir Sakson, "Still life with antic sculpture" by Arseny Semionov, "Red Carnations" by Kim Slavin, "The Beginning of the Spring", "A March" "Before the Rain" by Ivan Varichev, "Bouquet" by German Yegoshin, "Still-life", "Irises" by Sergei Zakharov, and some others.Изобразительное искусство Ленинграда. Каталог выставки.

No results under this filter, show 92 sentences.

Copyright © 2024 RandomSentenceGen.com All rights reserved.