Sentences Generator
And
Your saved sentences

No sentences have been saved yet

37 Sentences With "spring operated"

How to use spring operated in a sentence? Find typical usage patterns (collocations)/phrases/context for "spring operated" and check conjugation/comparative form for "spring operated". Mastering all the usages of "spring operated" from sentence examples published by news publications.

An altercation followed involving an Army veteran named Shevoy Bleary-Murdock, who was reportedly carrying a spring-operated knife.
Copeland says 1 OAK negligently allowed the stabber into the club with a "spring-operated switchblade knife" and did nothing to prevent the stabbing.
Other tracheotomes such as the spring operated tracheotome designed by Adamson Howard in 1985, Florida, improved the design by reducing the size and including a rotatable adjustable cap at the mount of the tracheotome to control the depth of penetration in the incision. Its handle also allowed the recocking of the spring operated cutting blade.[Howard, Adamson. 1985. Spring Operated Tracheotome .
The Cyclone feed concept first appeared on the Tippmann F/A as a spring operated system that required manual rewinding.
Originally they were only of novelty value, often regarded below spring-operated guns due to their construction and low velocities. Since there are spring action guns that can notably outperform the true low-end LPEGs and can be found at comparable prices, they are generally considered to be better choices.
It could be spring activated to full length if needed as a side arm, by pressing a lever instead of a handle button. By 1850, at least one American company offered a .22 rimfire single- shot pistol equipped with a spring-operated knife. After the American Civil War (1865), knife production became industrialized.
Similar to conventional automatic knives, federal law makes ballistic knives with a spring-operated bladeUSC Title 15, Ch. 29, Sec. 1245(d): "As used in this section, the term "ballistic knife" means a knife with a detachable blade that is propelled by a spring-operated mechanism." illegal to possess, manufacture, sell, or import "in or affecting interstate commerce." This means they are illegal to import from outside the United States, as well as buy or sell over state lines, including possessing or making them with intent to sell over state lines. The federal law also makes it a separate crime to use or possess a ballistic knife during the commission of a federal crime of violence, with a minimum sentence of 5 years in a federal prison.
Some of these systems involved moving the tubing, or using wireline sinker bars to change the lift point. Others were spring operated valves. Ultimately, in 1944 W.R. King patented the pressurized bellows valve that is used today. In 1951 the sidepocket mandrel was developed for selectively positioning and retrieving gas lift valves with wireline.
Early strategies to cope with this problem included requiring the operator to break a pane of glass to release an internal spring-operated mechanism. Manual pull stations that require two hand motions, such as lift up and pull down, or push in and pull down, have since replaced the break-glass and single-action models in many modern installations.
Trip-beam ploughs are constructed with a hinge point in the beam. This is usually located some distance above the top of the plough bottom. The bottom is held in normal ploughing position by a spring-operated latch. When an obstruction is encountered, the entire bottom is released and hinges back and up to pass over the obstruction.
In the late spring operated form Dno until 6 May. I. Gruppe moved to Smolensk on 9 May and participated in the build-up for the Battle of Kursk. It was involved in Operation Carmen, a series of bombing attacks on Kursk rail targets on 2 June. Johannes Seifert relinquished command of the gruppe and was replaced by Fritz Losigkeit.
This was the reverse of a vibrator inverter. An electromagnet, powered by DC through contacts it operated (like a buzzer) (or fed with AC), caused a spring to vibrate and the spring operated change-over contacts which converted the AC to DC. This arrangement was only suitable for low-power applications, e.g. auto radios and was also found in some motorcycle electrical systems, where it was combined with a voltage regulator.
The Hero Honda CBZ was a motorcycle launched in early 1999 by Hero Honda, with an original Honda 156.8 cc engine. The styling of the bike was a scaled version of the Honda CB series. The CBZ has an over-square engine with a Keihin slide type carburetor with accelerator pump. It has a larger spring operated nozzle to provide a richer fuel air mixture into the engine for better acceleration.
A particular embodiment of the thermal blast technique has been developed and applied to generator circuit breakers. The self-blast technique described above is also widely used in SF6 generator circuit breakers, in which the contact system is driven by a low-energy, spring-operated mechanism. An example of such a device is shown in the figure below; this circuit breaker is rated for 17.5 kV and 63 kA.
In January 1946, Southerland sailed for the United States. Immobilized for a time at San Diego, she departed the California coast for the Central Pacific in November; and, in February 1947, she continued on to the western Pacific. She arrived at Shanghai on 8 February and, through the spring, operated along the China coast, primarily out of Tsingtao. In June, she was in Japanese waters; and, on 21 June, she sailed for home.
Spring-operated valve gear was used to minimise the weight of the flywheel, overcoming one of the drawbacks of industrial steam engines. The engine had a single horizontal cylinder which, along with the boiler and firebox, was placed behind the rear axle. The motion of the piston was transmitted to a separate crankshaft via the forked piston rod. The crankshaft drove the axle of the driving wheel (which was fitted with a flywheel) via a spur gear.
They ranged from simple needles to multi-pointed and multi-bladed spring- operated instruments specifically designed for the purpose. A major contribution to smallpox vaccination was made in the 1960s by Benjamin Rubin, an American microbiologist working for Wyeth Laboratories. Based on initial tests with textile needles with the eyes cut off transversely half-way he developed the bifurcated needle. This was a sharpened two-prong fork designed to hold one dose of reconstituted freeze-dried vaccine by capillarity.
Key components of a cargo hook include the load beam, the keeper, and the attach point. The load beam is the solid piece of metal at the bottom of a cargo hook that supports the load. Usually it has a curved, narrow end which is used to load a ring, rope, or net onto the hook. The keeper is the locking, spring-operated mechanism that keeps the load from sliding off the load beam during transport.
The engines were installed behind the cockpit at an angle of 85 degrees. Like the Yak-38, the engines received their air through eight spring-operated dorsal flaps, and the exhaust exited through a belly opening covered by two ventral doors. Yakovlev obtained funding for four prototypes. The first (48-0, with no callsign) was a bare airframe for static and fatigue testing. The second (48-1, call sign "48") was a non-flying powerplant testbed.
Arnold Neustadter (25 August 1910 – 17 April 1996) was an American inventor and businessman. With Danish engineer Hildaur Neilson, he invented the Rolodex desktop rotating card file and other office equipment. His earlier inventions included the Autodex, a spring-operated phone directory that automatically opened to the selected letter, Swivodex, an inkwell that did not spill, Punchodex, a paper hole puncher, and Clipodex, a transcription aid that attached to a stenographer's knee.History of the Rolodex , about.
Beginning of 1989, all of the 43 8-car trains were taken to Acton Works, where they were fitted with passenger alarms, a public address system and other safety related features. The original hydraulic parking brakes were replaced by a new spring-operated brake. Following these changes, two units were selected for prototype refurbishment, which was undertaken by Tickford Rail of Rosyth Royal Dockyard and Vic Berry of Leicester. The work included replacement of the seats, lighting, panelling and grab rails.
One must be at least 18 years old to buy and use airsoft firearms. Minors (under the age of 18)can be arrested and subject to juvenile detention for multiple years. In order to possess a CO2, air, or spring operated firearm without a license, the impact energy of a projectile fired at a distance of four meters (from the muzzle) must be less than ten joules. As of 2 January 2015 it is legal to own and import gas operated airsoft weapons.
Their actions stopped the flow of beer from various breweries for 48 days and sales of hard liquor increased 25 percent. Non-unionized Formosa Spring operated at full capacity until it ran out of beer August 29, 1958. Many people purchased beer smuggled in from US and Quebec with bootleggers collecting up to C$20.00 for a case of 24 pints (previously sold at C$4.25). This song could be heard daily on most radio stations during the beer strike.
Most scuba cylinder valves are currently of the K-valve type, which is a simple manually operated screw-down on-off valve. In the mid-1960s, J-valves were widespread. J-valves contain a spring-operated valve that restricts or shuts off flow when tank pressure falls to 300-500 psi, causing breathing resistance and warning the diver that he or she is dangerously low on air. The reserve air is released by pulling a reserve lever on the valve.
On some machines, these switches merely bring the machines back to a safe state, such as reducing the throttle to idle or applying brakes while leaving the machines still running and ready to resume normal operation once control is reestablished. Dead man's switches are not always used to stop machines and prevent harm. These switches can also be used as a fail-deadly. A spring-operated switch can also be used to complete a circuit when it is no longer held down.
This lifts the completed line in the assembler up between two fingers in the "delivery channel", simultaneously tripping the catch holding it in position. The spring-operated delivery channel then transports the line into the casting section of the machine, and engages the clutch that drives the casting section and the subsequent transfer into the distribution section. The operator is now finished with the line; the remaining processing is automatic. While the line is being cast, the operator can continue entering text for the next line.
The pantograph was, in keeping with most pantographs at the time, spring operated with an elementary head suspension. It featured needle roller bearings at the base and knuckle. The operating rods were cleverly hidden inside the hollow arms making an excellent aesthetically pleasing design. Although it had been used on a few rapid transit systems and on a Blackpool tram, the first use in the UK on the main lines was back in 1974 when a small number were fitted to some Class 309s based at Ilford EMU Depot.
The braking was full air-operated using Girling wedge-type drum brakes. A spring operated air parking-brake was employed, power steering for the Seddon-designed front-axle was optionally available. Unlike the RE and the Leyland Panther the radiator was not carried at the front but hung from the offside of the chassis in mid- wheelbase, ahead of the rear axle. A combined saloon heating and ventilation system with a thermostatically-controlled heat-exchanger and reversible fan drive was announced but this was never made available to customers.
This technique has proved to be very efficient and has been widely applied for high-voltage circuit breakers up to 550 kV. It has allowed the development of new ranges of circuit breakers operated by low energy spring-operated mechanisms. right The reduction of operating energy was mainly achieved by lowering energy used for gas compression and by making increased use of arc energy to produce the pressure necessary to quench the arc and obtain current interruption. Low current interruption, up to about 30% of rated short-circuit current, is obtained by a puffer blast.
This is an older method of water-saving automatic flushing, which only operates when the public toilet has been used. A push- button switch is mounted in the door frame, and triggers the flush valve for all urinals every time the door is opened. While it cannot detect the use of individual urinals, it provides reasonable flushing action without wasting excessive amounts of water when the urinals are not being used. This method requires a spring-operated automatic door closer, since the flush mechanism only operates when the door opens.
After the end of the pull is reached, the spring operated reel retracts the rope, either to store it, or to prepare it for another attempt to start and disengages the clutch hence the term "re-coil starter". If the reel were directly connected to the crank and lacked the freewheel mechanism, once the rope reached its end, the spinning crankshaft would keep turning the reel, which would violently recoil the rope in the opposite direction until it reached its end, where it would likely jam and stall the engine. This was created by Jacobsen Manufacturing in 1928.
She was docked annually at Olongapo and upon resuming active service each spring operated in Philippine waters. Ordered home late in 1930, Rizal departed Manila on 11 December 1930 for Guam, Honolulu, and San Diego. She decommissioned on 20 August 1931 at San Diego and was towed northward to Mare Island on 31 August 1931 by the minesweeper to be placed in reserve. Struck from the Navy list on 11 November 1931, Rizal was dismantled and her materials were sold 25 February 1932 for scrapping in accordance with the provisions of the London Naval Treaty for the reduction and limitation of naval armament.
In 1987 radio electronic token block (RETB) was installed on all of the West Highland Railway system, except for the Fort William station area. RETB enabled safe operation of the long single line sections without signalling staff at stations; the control centre was at Banavie. The points at passing loops at stations were spring operated, and were negotiated at slow speed in the facing direction. To avoid confusion in radio voice exchanges between drivers and the signallers at Banavie, Mallaig Junction was renamed Fort William Junction while Tyndrum Upper station was renamed Upper Tyndrum - both from late 1989.
Many players use a strip of leather placed over the knee, called a "popping strap", which provides for an airtight seal. More rarely, a simple gravity- or spring-operated flap valve attached to the bottom of the chanter achieves the same end. Generally, for all other notes (except for special effects, or to vary the volume and tone) the chanter stays on the knee. One characteristic of the chanter is that it can produce staccato notes, because the piper seals it off at the bottom; with all of the finger holes closed, the chanter is silenced.
The 152 mm howitzer 2A65 (M1987) is mounted on a conventional split trail carriage and, when deployed in the firing position, rests on three points, the hydraulic circular firing jack under the forward part of the carriage and the two spades at the rear. Each of the box section trails has a caster wheel to assist the gun crew in bringing the weapon into action. When deployed in the firing position, these swing upwards through 180° and rest on top of each trail. The 152 mm ordnance is fitted with a muzzle brake and a semi-automatic breech mechanism, spring-operated ramming system, hydraulic counter-recoil device and a liquid-cooled recoil brake.
Rosewood (YN-26) was laid down 18 October 1940 by the American Ship Building Company, Lorain, Ohio; launched 1 March 1941; and placed in service 13 September 1941, Lt. D. Nicoli, Jr., USNR, in command. Following transit of the St. Lawrence River, Rosewood moved down the U.S. East Coast to Norfolk, Virginia, and through the next spring operated as a net tender in the 5th Naval District. Commissioned 18 June 1942, she was ordered to Service Squadron 6 for duty in the Pacific Ocean. She departed Norfolk 26 July, arrived at Espiritu Santo 19 October, and for over a year tended nets and performed escort duties in the New Hebrides area. During that time, on 20 January 1944, she was redesignated AN-31.
Perspicacia Tick is a "Witch Finder", a travelling witch with the responsibility of finding young girls who have the potential to be witches. She makes a living as a teacher, a role which has given her a habit of correcting spelling, grammar and punctuation. Since she often finds herself in areas where witches are unwelcome, she has a spring-operated hat that only grows a point when she wants it to, although her name still provides a fairly obvious clue as to her real profession ("Miss Tick" = "Mystic"). Thanks to her time as a student at the Quirm College for Young Ladies, which views time in cold water as character-building, she has also mastered the ability to stay underwater for prolonged periods, allowing her to escape punishment from superstitious witch-hunters.

No results under this filter, show 37 sentences.

Copyright © 2024 RandomSentenceGen.com All rights reserved.