131 Sentences With "spooling" | Random Sentence Generator

He often took his time when enlisting people's help, spooling them up slowly.

Then they take off and land nearby, spooling out thread as they do so.

Other groups are seeing it too and spooling up to help make it happen in more places.

Is the projector visible — and, if it's spooling celluloid rather than video, is it an antiquated projector?

Before he's the genie, Will Smith's character is a sailor spooling the story of Aladdin to his family.

But it was impossible; through our conversation, to stop a fan's lifetime of memories un-spooling in my mind.

I felt that I could see the weeks and months spooling out, a moment of calm, a new emergency.

Then there is the Solar Roof, which is spooling up in production, and continued advancements in Powerwall and Powerpack.

As the tale was spooling out, Sanders looked at the man only intermittently, and only for seconds at a time.

Yes, launching the Model Y crossover next year and spooling up a factory in China could shatter this newfound cost discipline.

Walker has a gift for spooling out these kinds of details, as if we are kittens and she is trailing string.

He speaks quickly in vast paragraphs of multi-clause sentences, spooling through connections as they occur to him in the moment.

But the decoded message, spooling on a paper strip out of her machine, told her that the Bismarck was going to Brest.

He did a few repairs and then began looking at it using a light box, spooling it from reel to reel by hand.

Ships combating piracy are already using them extensively, as it's a much cheaper way of checking out distant ships than spooling up a helicopter.

By steadily spooling out grisly details of the killing, Mr. Erdogan has found common cause with American lawmakers outraged by Saudi Arabia's brazen tactics.

"The mouse is asleep," he says, waves of electrical activity characteristic of deep sleep spooling across an inset video at the top of the screen.

It makes for a much more implausible narrative arena than cyberspace, the threads of which were already fast spooling together while Neuromancer was granting them a vernacular.

" He "slammed it down" and tried the starter as the helicopter neared the East River, but "it wasn't spooling up fast enough" so he "rode it in.

When spider silk is compressed, its filaments shorten by spooling inside tiny droplets of watery glue that cling to the threads, allowing the web to remain under tension.

It's clear that Activision is spooling up the Call of Duty hype machine for some kind of reveal, and the growing list of teases suggests it's happening very soon.

"The Chronicles of San Francisco" (pictured top) is a mesmerising black-and-white digital photo-collage that dominates SFMOMA's street-level gallery, spooling across a curved 30-metre LED screen.

But smack in the middle of its ever-spooling web of Mad Hatters, Riddlers, Lucius Foxes, and Ivys was Butch Gilzean, an original creation of showrunners Bruno Heller and Danny Cannon.

Every speck of colorful 3D abstraction was once a fleck of paint, from buttery ribbons spooling across the space's quartet of giant screens to confetti-like particles dancing through digital space.

Finn, as he is known, is the eloquent one, spooling out his verbal riffs in a bid not just to catch girls but to boost the dramatic dash of the proceedings.

Removing a Guinea worm has traditionally involved pulling it out of an opening in the skin over several weeks and spooling the parasite around a stick as though it were a string.

"What's more, with the widespread productivity gains throughout Tesla and the new production lines spooling up, we are on track to reach 2500K/week for Model 3 next month," the email continues.

By spooling out the plan little by little, the film keeps its audience in suspense about how all these pieces are coming together, then doubles back on itself to do it again.

And once engaged, the 18-pound drag had very little startup inertia, or a smooth transition into spooling, or paying out line, making fighting and retrieving fish as smooth as can be.

Correspondence between Thompson and Steadman most often took place by fax: The sound of paper spooling out of a fax machine in the middle of the night is the sound of Sadie's childhood.

At $99,000 you won't be installing this in the basement just yet but it's great to know that something like this exists – and will soon be spooling out metal parts at quite a clip.

The remotely-operated vehicle, named the 11th Hour, has a self-spooling function that eliminates entanglement with cables, and its ultra-high definition 4K 3D camera system brings new clarity to images on the seafloor.

Today, the Sanford Underground Research Facility looms over the old west town just as it did during the gold rush, cables spooling out of its tallest building and into a shaft that goes down 8,000 feet.

When Garrett fired it against a wall, he'd hear a telltale clang; if he fired it into thin air, it would reach the end of its tether before returning to his hand, spooling backwards with a different noise.

In some cases, though, the PlayStation would be unable to hit those levels of quality—and in extreme cases, where the CD drive was spooling data, we had to resort to mod tracker type music, but that wasn't very often.

A friend of mine reminded me of the dish not long ago, spooling me back to a fourth-floor-walk-up kitchen where I had to cook quietly while the baby fell asleep, before greeting guests for late-night suppers.

What marks individuality in the illustrations is the sheer sumptuousness of garments and an apparent lack of mobility—only the most noble, idealized women are marooned by their dozen layers of robes and long black hair spooling out like ribbon on the floor.

Most of this episode is spent setting up the story Sherman-Palladino will be spooling out over the next few episodes — resetting the board after season seven and eight years of hiatus, establishing the new status quo — but it does so ably.

Wednesday night will be tough, no doubt – work and school spooling up to the red line after a few weeks at idle – but a big bowl of Mark's recipe for curried tofu with soy sauce comes together in but 30 minutes, and is terrific over rice.

In fact, there's pretty much a direct relationship between colder temperatures and increasing electricity use, as these charts from the Energy Information Administration show: And now a "bomb cyclone" is spooling up to blanket swaths of the East Coast in cold and snow this week, causing even higher demand for heat.

And the universe of patterns on granite—light as lattice, lacework, loose weave, a dress knit of light Madame Cézanne wears, skein unravelling, nakedness inside—bedazzlement—his complicated friend— surface and depth, grazing mouth on stone, light's long kiss, light's ripple, unruly, water unspooling, spooling down from the mountain, threads weaving together, coming undone . . .

He doesn't skinch on tackle or line, spooling his Van Staal with 50-pound Power Pro.

Wire rope spooling-Technology is the technology to prevent wire rope getting snagged when spooled especially in multiple layers on a drum.

With the parallel groove system, rope wear is considerably reduced in multilayer spooling. Winch drums for multilayer wire rope Spooling When the first layer has filled the drum, the second layer then travels back across the drum with each wrap of rope sitting precisely along the groove of two wraps of the first layer. With parallel grooving it is possible to calculate the exact forces that the rope imposes on the drum because the spooling is controlled. Multilayer wire rope Spooling Pic 1 Cross winding is reduced to approximately 20% of the circumference of the drum, and 80% remains parallel to the flanges in the inner layer rope groove. This parallel grooving evenly distributes the load between the individual layers and has been shown to increase substantially – by more than 500%, tests have shown – the life of the wire rope.

Device drivers are normally enumerated, set up and managed by a separate Manager layer, which may provide additional functionality. For instance, printing systems often include functionality to provide spooling functionality on top of the drivers, providing print spooling for any supported printer. In ODBC the Driver Manager (DM) provides these features. The DM can enumerate the installed drivers and present this as a list, often in a GUI-based form.

She has tried this four times before, and is surprised on the fifth time when the computer starts to talk to her by spooling out information in paper form.

Bentley et al. (2009), p. 272. Hoses must wrap neatly when spooling up, to avoid damage; this can be done manually for smaller systems, but for very large drills a level-wind system has to be implemented.Bentley et al. (2009), p. 273. The hose ideally should have the tensile strength to support its weight when spooling into the hole, but for very deep holes a supporting cable may need to be used to support the hose.Bentley et al.

Grooved shape steel segments were simply welded or screwed to existing plain steel drums.George F LeBus, US Patent 2204938 Ever since then, drum groovings have been widely used to guide the spooling of wire rope onto and off winch drums. Introducing a continuous helical groove onto the drum, like the thread of a screw, provides a way to guide the rope when spooling onto or off a drum. However this has been shown to work effectively only when the rope is wrapped in a single layer.

Similarly, before spooling was added to PC operating systems, word processors were unable to do anything else, including interact with the user, while printing. Spooler or print management software often includes a variety of related features, such as allowing priorities to be assigned to print jobs, notifying users when their documents have been printed, distributing print jobs among several printers, selecting appropriate paper for each document, etc. A print server applies spooling techniques to allow many computers to share the same printer or group of printers.

To maximise the benefits of the parallel grooving system, certain operating conditions are required. These include: ;Application-specific design Every system should be tailored to the application for which it is used. The groove pattern is engineered to suit the rope's length, diameter and construction type. ;Spooling under tension In any multi-layer spooling application it is important that when the rope is first installed on the drum, it is done so under tension to avoid any slack on inner layers that can be crushed or nicked against the groove walls by outer layers.

Some early Unix systems at Bell Labs used GECOS machines for print spooling and various other services,6.3.2. Files Controlling User Accounts and Groups RedHat so this field was added to carry information on a user's GECOS identity.

Beginning with DOS 2.0, the `print` command was included to allow basic print spooling: the ability to continue to use the computer while printing occurred in the background, and the ability to create a queue of jobs to be printed.

Ever since the development of wire rope, comprising multiple wire strands, spooling the wire has presented technical challenges. When wrapped in multiple layers, the upper layers have a tendency to crush the lower layers, while the lower layers have a tendency to pinch upper layers. The rubbing of rope against rope also has a tendency to cause wear. These problems were addressed by Frank L. LeBus Sr., a supplier of drilling equipment to the oilfields of Texas, USA, who in 1938, patented the use of a groove bar on hoisting drums to guide the spooling of rope.

RT-11SJ displayed on a VT100. In computing, the `print` command provides single-user print spooling capability in a number of operating systems. It is roughly similar to that provided by the UNIX System V lp and BSD lpr print spooler systems.

Magnetic recording tape wound onto a spool may have contributed to the origin of the term In computing, spooling is a specialized form of multi-programming for the purpose of copying data between different devices. In contemporary systems, it is usually used for mediating between a computer application and a slow peripheral, such as a printer. Spooling allows programs to "hand off" work to be done by the peripheral and then proceed to other tasks, or to not begin until input has been transcribed. A dedicated program, the spooler, maintains an orderly sequence of jobs for the peripheral and feeds it data at its own rate.

The "GRASP" button, installed on an IBM 370/E that provided an interrupt into the F0 partition. GRASP was a systems software package that provided spooling facilities for the IBM/370 running DOS/VS or DOS/VSE environment, and IBM/360 running DOS or retrofitted with modified DOS.

Grooving systems for multilayer spooling can be carved onto steel shells that are mounted onto old drums, by either bolting or welding, as an outer sleeve. Called split sleeves, they can be retrofitted onto old drums or mounted on new drums to allow a future change of application.

Machine lace curtains 1918 Spooling on a Nottingham lace curtain machine 1918 The lace curtain machine is a lace machine invented by John Livesey in Nottingham in 1846. It was an adaptation of John Heathcoat's bobbinet machine. It made the miles of curtaining which screened Victorian and later windows.

Spooling is also used to mediate access to punched card readers and punches, magnetic tape drives, and other slow, sequential I/O devices. It allows the application to run at the speed of the CPU while operating peripheral devices at their full rates speed. A batch processing system uses spooling to maintain a queue of ready-to-run tasks, which can be started as soon as the system has the resources to process them. Some store and forward messaging systems, such as uucp, used "spool" to refer to their inbound and outbound message queues, and this terminology is still found in the documentation for email and Usenet software, even though messages are often delivered immediately nowadays.

Song, 38-39. For the process of making silk, he noted that raw silk could not be reeled into normal silk until a formal wadding process was done. He described the reeling of silk fabric with a reeling machine,Song 48-49. the spooling of silk fibers,Song, 49-50.

Spooling was one of the first forms of multitasking designed to exploit asynchronous I/O. Finally, multithreading and explicit asynchronous I/O APIs within user processes can exploit asynchronous I/O further, at the cost of extra software complexity. Asynchronous I/O is used to improve throughput, latency, and/or responsiveness.

It was very cumbersome to run multiple partitions. Many installations used Houston Automatic Spooling Priority (HASP) to mitigate the complexity. MFT Version II (MFT-II) shared much more of the Control Program and Scheduler code with MVT, and was much more flexible to run. The maximum number of partitions increased to 52.

One is to create a larger diameter spooling surface that allows the fly line to fill the entire fly reel. The other is to provide additional line for fighting heavy or hard fighting fish. A fast running or hard fighting fish may take line from the reel and get into the backing.

The system has been used to mount ropes up. Multilayer wire rope Spooling Pic 2 In offshore applications, huge lengths of rope are often housed on drums. The anchor winches on Saipem's Semac 1 pipe laying barge, for example, each hold 2,800 metres of 76mm (3 inch) diameter wire rope in 14 layers.

OS/360 included spooling routines, called reader/interpreters and output writers. Each reader/interpreter was "responsible for reading one input job stream" – that is one input device. Likewise each output writer was responsible for controlling one printer or punch. Spooled data were stored in OS temporary datasets controlled by standard OS services.

Early DOS included no spooling sub-system to improve the efficiency of punched card and line printer I/O. By the late 1960s both IBM and aftermarket vendors began filling this void. IBM's spooler was an option called POWER, and Software Design, Inc., an independent software company, sold a spooler called GRASP.

Sometimes it is not possible to achieve the optimum fleet angle. Where there is no space to rig a sheave the requisite distance from the drum, two additional spooling devices are available. One is a fleet angle compensator, which is driven automatically by the rope tension. The other is a level winder that is mechanically driven.

One of the biggest planes seen there, more often than not, is the HK Co.'s 737-200 or the A319. The takeoff generally requires the spooling up of engines, with brakes on, to minimize the time on the runway while maximizing as much speed possible. This technique is generally performed by bigger aircraft, with heavier payload.

The Spooler was a systems software operating system package that provided spooling facilities for the IBM System/370 running DOS/VS, DOS/VSE environment, and IBM System/360 running DOS/360 or retrofitted with modified DOS/360, such as TCSC's EDOS. Other venders offering The Spooler as part of their OS were Amdahl, Fujitsu, Hitachi, Magnuson, and RCA.

Three basic approaches for constructing a space elevator have been proposed: First, using in-space resources to manufacture the whole cable in space. Second, launching and deploying a first seed cable and successively reinforcing the seed cable by additional cables, transported by climbers. Third, spooling two cables down and then connecting the ends, forming a loop.

A page break is a marker in an electronic document that tells the document interpreter that the content which follows is part of a new page. A page break causes a form feed to be sent to the printer during spooling of the document to the printer. Thus it is one of the elements that contributes to pagination.

POWER was an IBM operating system enhancement package that provided spooling facilities for the IBM System/360 running DOS/360 or retrofitted with modified DOS/360. Upgrades, POWER/VS and POWER/VSE were available for and the IBM System/370 running DOS/VS and DOS/VSE respectively. POWER is an acronym for Priority Output Writers, Execution processors and input Readers.

A trace of GCOS influence remains today in modern UNIX systems. Some early Unix systems at Bell Labs used GCOS machines for print spooling and various other services. The field added to "/etc/passwd" to carry GCOS ID information was called the "GECOS field" and survives today as the "pw_gecos" member used for the user's full name and other human-ID information.

IBM proclaimed JES1 to be "the single most important addition" to the job scheduling provided by VS1. IBM Systems Journal defined JES1's services as Spooling and scheduling, adding "Its three major components are peripheral services, central services, and queue management." JES1 was not popular, because HASP and ASP users often had made local modifications (edits), and wanted to retain their investment.above IBM document, page 5.

LANSPool was network printer administration software developed by Intel. The package was designed specifically for the Novell NetWare network operating system. The software allowed users to share printers and faxes and for administrators to modify LAN printing operations. The software takes its name from the acronym for local area network (LAN) and the spooling technique by which computers send information to slow peripherals such as printers.

The Symbols are accompanied with the loud sound of a machine "spooling up" like a jet engine turbine. Locke finally hits the 'Execute' button, at which point the timer resets to 108 and the sound dies down. Meanwhile, in the armory, Jack bursts in and stops an enraged Sayid, who yells, "He's lying!" several times. They lock a bloodied Henry back in the armory.

PUP supported a large number of applications. Some of them, such as Telnet and File Transfer Protocol, were basically the same protocols as used on the ARPANET (much as occurred with the TCP/IP suite). Others were novel, including protocols for printer spooling, copying disk packs, page-level remote access to file servers, name lookup, remote management, etc. (although some of these capabilities had been seen before, e.g.

William Clapperton who were sewing thread manufacturers in Paisley, Scotland. Around this time they also bought into other businesses including the Crooklands Bobbin MillCumbria Sites and Records Office, Kendal, United Kingdom, SMR number 6143 to secure their supply of bobbins, and a 'spooling mill' in Montreal, Quebec, Canada, to prepare their sewing threads exported for the North American market and thereby avoid large import taxes introduced by the Canadian Government.

The automatic level winder fitted is designed and engineered to be compatible with the grooving on the drum. Alternatively, a sheave can be integrated and installed within the housing frame. In this case, the system can be set up anywhere around the drum. Oceanographic installations that spool rope up to 46 layers have demonstrated that level winders give synchronized and controlled spooling in the harshest, most testing conditions.

In the early days of the prison, women inmates were held in the windowless attic atop the high security prison. They shared a single room and slept in the same area where they worked, primarily at "picking wool, knitting, and spooling." In 1838 all women prisoners were transferred to the then-new female wing at Sing Sing. In 1892 the women returned to a new building at the Auburn prison.

ASP later became JES3. In MVS, HASP became JES2, one of two Job Entry Subsystems. It was many years before the HASP labels were removed from the JES2 source, and the messages issued by JES2 are still prefixed with "$HASP". A modified version of HASP was used to provide batch spooling and remote job entry services for the Michigan Terminal System during the late 1960s, 1970s, and 1980s.

The sound track was added on the edge of the film opposite to the perforations. Standard 8mm had the stripe between the perforations and the edge of the film which made good contact with a magnetic head problematic. A balance stripe was added on the opposite edge to facilitate spooling of the film. The Ektasound cartridge was deeper than the silent cartridge to allow access of the camera's recording head.

The Confederate occupation of six weeks was for the salt from which they caravan to the south to keep their meats supply from spooling. A counter-assault took the Union some time to reorganize and was executed from October 21 to November 10, 1862. The 9th and 5th were a part of the Union expedition up the Kanawha Valley by boat and horse. General Loring withdrew and left the salt works destroyed.

According to Alderson: "The bagpipe player was told to play anything he wished and just walk around the studio playing. He was wearing his NYPD uniform pants during the overdub and was understandably confused. His performance was perfect." At the end, the sound of a tape spooling backwards through the album takes the listener back to "Trumpeter Landfrey", perhaps trying to convey a message that the cycle of war and confusion is destined to continue.

The developers were Tom Simpson and Bob Crabtree. HASP was a program that ran on a mainframe, and performed functions such as: scheduling, control of job flow, spooling and printing/punching. HASP had no support for IBM System/360 Operating System Remote Job Entry, 360S-RC-536, but provided roughly equivalent facilities of its own. In HASP II V3, NIH created the shared spool capability for HASP that was used by many mainframe sites.

Peripheral devices have always been much slower than core processing units. This was an especially severe problem for early mainframes. For example, a job which read punched cards or generated printed output directly was forced to run at the speed of the slow mechanical devices. The first spooling programs, such as IBM's "SPOOL System" (7070-IO-076) copied data from punched cards to magnetic tape, and from tape back to punched cards and printers.

Some important systems use Bisync data framing with a different link control protocol. Houston Automated Spooling Program (HASP) uses Bisync half-duplex hardware in conjunction with its own link control protocol to provide full-duplex multi-datastream communication between a small computer and a mainframe running HASP. In Bisync terms, this is conversational mode. Some early X.25 networks tolerated a connection scheme where transparent Bisync data frames encapsulated HDLC LAPB data and control packets.

The virus contains code that enters a processing loop each time the processor's timer tick is activated. Symptoms also include spontaneous disconnection of workstations from networks and creation of large printer spooling files. Disconnections occur since Jerusalem uses the 'interrupt 21h' low-level DOS functions that Novell NetWare and other networking implementations required to hook into the file system. Jerusalem was initially very common (for a virus of the day) and spawned a large number of variants.

Job descriptions were read in from cards or paper tape, peripherals and magnetic tape files were dynamically allocated to the job which was then run, producing output on the line printer. George 2 added the concept of spooling. Jobs and input data were read in from cards or paper tape to an input well on disk or tape. The jobs were then run, writing output to disk or tape spool files, which were then written to the output peripherals.

Each berth can accommodate a vessel with a draft in excess of at low tide. Although there are four berths, a maximum of three ships can be accommodated in port at any one time due to the close proximity of North A and South B. Canada Border Services Agency facilities are located at each pier. Pier A also houses a warehouse, complete with cable ship spooling apparatus and cable storage facility. Ogden Point has break bulk cargo docks.

EXEC II is a discontinued operating system developed for the UNIVAC 1107 by Computer Sciences Corporation (CSC) while under contract to UNIVAC to develop the machine's COBOL compiler. They developed EXEC II because Univac's EXEC I operating system development was late. Because of this the COBOL compiler was actually designed to run under EXEC II, not EXEC I as specified in the original contract. EXEC II is a batch processing operating system that supports a single job stream with concurrent spooling.

DOS is not a multitasking operating system. DOS did however provide a Terminate and Stay Resident (TSR) function which allowed programs to remain resident in memory. These programs could hook the system timer and/or keyboard interrupts to allow themselves to run tasks in the background or to be invoked at any time preempting the current running program effectively implementing a simple form of multitasking on a program-specific basis. The PRINT command did this to implement background print spooling.

Each reader/interpreter or output writer was a separate operating system task in its own partition or region.However, RJE and the later CRJE called the Reader/Interpreter as a subroutine and performed the functions of an output writer within its own partition/region. A system with a large number of readers, printers, and punches might have a large number of spooling tasks. HASP was developed by IBM Federal Systems Division contractors at the Lyndon B. Johnson Space Center in Houston.

Conversely, for slow input peripherals, such as a card reader, a spooler can maintain a sequence of computational jobs waiting for data, starting each job when all of the relevant input is available; see batch processing. The spool itself refers to the sequence of jobs, or the storage area where they are held. In many cases the spooler is able to drive devices at their full rated speed with minimal impact on other processing. Spooling is a combination of buffering and queueing.

ReactOS's network stack is built on the TCP portion of OSKit's port of the network stack in FreeBSD, along with an internally developed implementation for packet- oriented protocols like IP. Later, lwIP was integrated into the ReactOS network stack. Windows network services like LSASS, SAM, NETLOGON, and print spooling are already available as open-source alternative by the Samba/Samba TNG project. A fork of rdesktop is used as an implementation of a client software for Microsoft's proprietary Remote Desktop Protocol.

The anti-lag system (ALS) is a method of reducing turbo lag or effective compression used on turbocharged engines to minimize turbo lag on racing or performance cars. It works by delaying the ignition timing very slightly to balance an inherent loss in combustion efficiency with increased pressure at the charging side of the turbo. This is achieved as a small amount of fuel/air mixture escapes through the exhaust valves and combusts in the hot exhaust manifold spooling the turbocharger creating higher usable pressure.

The track included looped tape effects. For the track, McCartney supplied a bag of -inch audio tape loops he had made at home after listening to Stockhausen's Gesang der Jünglinge. By disabling the erase head of a tape recorder and then spooling a continuous loop of tape through the machine while recording, the tape would constantly overdub itself, creating a saturation effect, a technique also used in musique concrète. The Beatles would continue these efforts with "Revolution 9", a track produced in 1968 for The White Album.

It incorporated numerous technologies and techniques such as "multiprogramming, job scheduling, spooling, interrupts, pipelining, interleaved storage, autonomous transfer units, virtual storage and paging – though none of these techniques had been invented when the project started in 1956." Other innovations included read only memory and a compiler-compiler. The greatest innovation was virtual memory, which allowed the drum storage to be treated as if it were core. Three of them were built, and installed at Manchester University, the University of London and the Rutherford Laboratory.

The atmosphere in the cockpit was relaxed and tension free till 15 seconds before the crash. The first sign of anxiety became apparent only when Arvind called for raising the landing gear. Investigators conducted a simulation of the crash and found that at 16 seconds before the crash, the spooling up of the engine had reduced the rate of descent. However, eight seconds later when the Flap Lever was moved to 15, the rate of descent increased as seen by the steepening of the slope of the curve.

Hard disks, which are even faster and support random access, started to replace this use of magnetic tape in the middle 1960s, and by the 1970s had eliminated this use of tape. Because the unit record equipment on IBM mainframes of the early 1960s was so slow, it was common to use a small offline machine such as a 1401 instead of spooling. The term "spool" may originate with the Simultaneous Peripheral Operations On-Line (SPOOL) software; this derivation is uncertain, however. Simultaneous peripheral operations on-line may be a backronym.

MP/M (Multi-Programming Monitor Control Program) is a discontinued multi-user version of the CP/M operating system, created by Digital Research developer Tom Rolander in 1979. It allowed multiple users to connect to a single computer, each using a separate terminal. MP/M was a fairly advanced operating system for its era, at least on microcomputers. It included a priority- scheduled multitasking kernel (before such a name was used, the kernel was referred to as the nucleus) with memory protection, concurrent input/output (XIOS) and support for spooling and queueing.

On IBM mainframe systems Job Entry Control Language or JECL is the set of command language control statements that provide information for the spooling subsystem - JES2 or JES3 on z/OS or VSE/POWER for z/VSE. JECL statements may "specify on which network computer to run the job, when to run the job, and where to send the resulting output." JECL is distinct from job control language (JCL), which instructs the operating system how to run the job. There are different versions of JECL for the three environments.

Transfer trigger could be done through daemons (directory spooling), command line calls or through one of the various available API (Java, Thrift, REST HTTP(s)). From production aspect, Waarp R66 proposed local administration interface (HTTPS) or central ones (GUI). It optimizes the usage of the network (using multiplexing, bandwidth throttling, proxy support, Keep-alive and timeout, ...) or the usage of other resources (cpu and memory). It allows a high availability installation and the support of horizontal scalability with a high parallel transfer capability (in theory up to 2^64).

The gearbox has shown to hold more power than the factory stated quite reliably. That being said, a lower geared final drive helps eliminate excessive stress on the gears; thus the 3.82 FD (final drive) is weaker than the 4.05 and the now hard to source 4.45 gearset is the strongest. The transmission can still break, especially with a fast spooling turbo to create a low end boost spike. The most common gear to break is third, and commonly a boost ramp is tuned in to help prolong the stock transmission.

The H200 was commonly used as a spooling computer associated with a larger Honeywell 800 series machine. The H1800-II consisted of an H1800 mainframe equipped only with magnetic tape drives and an online adaptor (OLA) connection to a satellite H200 to simulate a card reader for reading low volumes of job control cards. The LINK program running on the H200 handled the OLA,"On-Line Adapter (connects a Series 200 processor to a Honeywell 800 or 1800)" copied punched cards or punched paper tape to magnetic tape, and copied records from magnetic tape to card punch or to line printer.

SPOOL is an acronym for Simultaneous Peripheral Operations On Line. As with some modern machines, computer printers made during the S/36 era were very slow, to the point that it was possible for the S/36 or other computers to write data to the printer faster than it can print. Spooling was used on the S/36 to deal with this issue, with the added benefit that multiple programs could write to the printer concurrently, without waiting for each other to finish. To allow the system to manage the problem, system components called "writers" and "spool files" were developed.

After he was sure the helicopter could reach the river, the pilot activated the skid-mounted floats at 19:07:02, agl. When he reached to engage the emergency fuel shutoff lever in preparation for a hard landing, he realized it had already been activated, and that part of a passenger's fall protection tether was underneath the fuel shutoff lever. When he disengaged the fuel shutoff lever, he was able to restart the engine, but at that point, the helicopter had already descended past agl and the engine "wasn't spooling up fast enough" to avoid a crash landing.

A graduate of Sidney Sussex College, Cambridge, Kilburn worked on radar at the Telecommunications Research Establishment (TRE) in Malvern under Frederic Calland Williams during the Second World War. After the war ended, he was recruited by Williams to work on the development of computers at the University of Manchester. He led the development of a succession of innovative Manchester computers that incorporated a host of ground-breaking innovations and developments, including the Ferranti Mark 1, the world's first commercial computer, and the Atlas, one of the first time-sharing multiprocessing computers that incorporated job scheduling, spooling, interrupts, pipelining and paging.

Remote Spooling Communications Subsystem or RSCS is a subsystem ("virtual machine" in VM terminology) of IBM's VM/370 operating system which accepts files transmitted to it from local or remote system and users and transmits them to destination local or remote users and systems. RSCS also transmits commands and messages among users and systems. RSCS is the software that powered the world’s largest network (or network of networks) prior to the Internet and directly influenced both internet development and user acceptance of networking between independently managed organizations. RSCS was developed by Edson Hendricks and T.C. Hartmann.

In December 1964 ICT set up an Operating Systems Branch to develop a new operating system for the 1906/7. The branch was initially staffed with people being released by the end of work on the OMP operating system for the Ferranti Orion. The initial design of the new system, named George in part after George E. Felton, head of the Basic Programming Division, was based on ideas from the Orion and the spooling system of the Atlas computer. The initial versions, George 1 (for the ICT 1901, 1902 and 1903 machines) was a simple batch processing system.

The branch was initially staffed with people being released by the end of work on the OMP operating system for the Ferranti Orion. The initial design of the new system, named George after George E. Felton head of the Basic Programming Division, was based on ideas from the Orion and the spooling system of the Atlas computer. (In public it was claimed that George stood for GEneral ORGanisational Environment, but contemporary sources say that was a backronym). In July 1965 a team from ICT was present at a seminar at NPL describing the CTSS operating system developed for MIT's Project MAC.

The use of ¼-inch audio tape loops resulted primarily from McCartney's admiration for Stockhausen's Gesang der Jünglinge. By disabling the erase head of a tape recorder and then spooling a continuous loop of tape through the machine while recording, the tape would constantly overdub itself, creating a saturation effect, a technique also used in musique concrète. The tape could also be induced to go faster and slower. McCartney encouraged the other Beatles to use the same effects and create their own loops. After experimentation on their own, the various Beatles supplied a total of "30 or so" tape loops to Martin, who selected 16 for use on the song.

Nowadays, the most common use of spooling is printing: documents formatted for printing are stored in a queue at the speed of the computer, then retrieved and printed at the speed of the printer. Multiple processes can write documents to the spool without waiting, and can then perform other tasks, while the "spooler" process operates the printer. For example, when a large organization prepares payroll cheques, the computation takes only a few minutes or even seconds, but the printing process might take hours. If the payroll program printed cheques directly, it would be unable to proceed to other computations until all the cheques were printed.

In an initiative led by Paul D. Thomas, Reynolds Packaging Group chief executive officer and a former Alcoa executive, on September 21, 2008, Reynolds announced that one of the foil plants that produced Reynolds Wrap, in downtown Richmond, Virginia, would be closed and foil operations moved to Louisville, Kentucky, where Reynolds Wrap first was produced. A small portion of the spooling operation from the Richmond Foil plant was moved to the Reynolds plant in Grove City, Pennsylvania, in early 2010. Hart later closed five other plants within Reynolds. As a reflection of the recessionary times, salaries were frozen and salaried employees were not given pay raises.

The electrodes are pointed to penetrate clothing, and barbed to prevent removal once in place. The original TASER device probes unspool the wire from the cartridge that causes a yaw effect before the dart stabilizes, which made it difficult to penetrate thick clothing, but newer versions (X26, C2) use a "shaped pulse" that increases effectiveness in the presence of barriers. The TASER 7 conducted energy device is a two-shot device with increased reliability over legacy products. The conductive wires spool from the dart when the TASER 7 conducted energy device is fired, instead of spooling from the TASER cartridge which increases stability while in flight and therefore increases accuracy.

It was the 1401 that transferred input data from slow peripherals (such as the IBM 1402 Card Read-Punch) to tape, and transferred output data from tape to the card punch, the IBM 1403 Printer, or other peripherals. This allowed the mainframe's throughput to not be limited by the speed of a card reader or printer. (For more information, see Spooling.) Elements within IBM, notably John Haanstra, an executive in charge of 1401 deployment, supported its continuation in larger models for evolving needs (e.g., the IBM 1410) but the 1964 decision at the top to focus resources on the System/360 ended these efforts rather suddenly.

Unlike TFTP, it made no provisions for sending the file-name as part of transfers, so it could only be used either in places that didn't need a file name (as with spooling), or in conjunction with another protocol that provided the file-name (as in booting). Since EFTP was so simple, it was easy to implement in a very small amount of memory, an important consideration at that time. It was used for booting Xerox Altos over the Ethernet, and also to send files to the print spoolers of laser printers. Various expansions of the initialism EFTP have been given, including Easy File Transfer Protocol, Ether File Transfer Protocol, and Experimental File Transfer Protocol.

It requires less than two shop visits per 1,000 flight hours and averages 6,500 hours between in-flight events. It also demonstrates high responsiveness to control inputs, spooling from idle to full afterburner in 4 seconds. The engine contains an in-flight engine condition monitoring system (IECMS) that monitors for critical malfunctions and keeps track of parts lifetimes.Jenkins 2000, p. 144. GE developed the F110 for the Air Force as an alternative to the Pratt & Whitney F100 for use on the F-16 and F-15 based on the F101 and used F404 technology.GEAE: F110 Engine GE developed the F404-GE-402 in response to a Swiss requirement for more power in its F/A-18 version.

The 7/32 and 8/32 became the computers of choice in large scale embedded systems, such as FFT machines used in real-time seismic analysis, CAT scanners, and flight simulator systems. They were also often used as non-IBM peripherals in IBM networks, serving the role of HASP workstations and spooling systems, so called RJE (Remote Job Entry) stations. For example, the computers behind the first Space Shuttle simulator consisted of thirty-six 32-bit minis inputing and/or outputting data to networked mainframe computers (both IBM and Univac), all in real-time. The 8/32 was used in the Lunar and Planetary Laboratory, Department of Planetary Sciences at the University of Arizona for research purposes.

As more lodges were formed, ICS members from all over began to create regional variations, session themes, and new games with names like "Hat-Lib," "Spooling," and "Composer Tennis". Elaborate track swapping also became popular during this period, especially as a form of international musical collaboration. By now it had become common for Society members to personalize the 20-Song Game over time, cycling through periods with higher and lower volume goals. This was the point when ICS methodology started to evolve into a larger system for songwriters that could be used to tackle more or less any goal that the user wanted, including low-volume goals such as developing production, arrangement, and craft.

Wire-cut electrical-discharge machining (EDM) is primarily used for small production lot sizes where either extreme precision is required or other cutting technologies are not readily available. Wire-cut EDM cuts keyways by eroding material away from the workpiece through a series of rapid electric current discharges between a spooling wire and the workpiece through a dielectric liquid. Computer numerical control (CNC) wire-cut EDM machines allow for a wide variety selection of keyways to be cut, inclusive of multiple keyways on the same hub. The main limitations of CNC wire-cut EDM is the time it takes to cut a keyway as well as the size of parts a given wire- cut EDM machine can accommodate.

When it was first introduced May 2005, XPS (known at the time as "Metro") was characterized as a "PDF-killer", but an Adobe representative stated that they were "not threatened" by its addition to "Longhorn". However, a year later, Adobe had changed their stance and saw the inclusion of the new document format as an anti-competitive attack on their Portable Document Format. While Microsoft refused to remove XPS altogether, noting that it is at the core of Vista's print spooling system, they have offered the ability to system builders and OEMs to remove any user-visible aspects of the document format from the operating system. A few days later, it was announced that PC-to-PC Sync would not ship with Windows Vista.

Video of a foot- launching from a hill Launch techniques include launching from a hill on foot, tow-launching from a ground-based tow system, aerotowing (behind a powered aircraft), powered harnesses, and being towed up by a boat. Modern winch tows typically utilize hydraulic systems designed to regulate line tension, this reduces scenarios for lock out as strong winds result in additional length of rope spooling out rather than direct tension on the tow line. Other more exotic launch techniques have also been used successfully, such as hot air balloon drops from very high altitude. When weather conditions are unsuitable to sustain a soaring flight, this results in a top-to-bottom flight and is referred to as a "sled run".

The spooling mill premises also provided a facility for the storage of finished cloth made at their Wood Top and Cliviger Mills in Burnley.The Business and Professional Directory of All Cities in Ontario with Montreal, Quebec, Winnipeg, Halifax, St. John Sherbrooke and Hull, Published by The Union Publishing Company of Ingersoll, Canada, p203, 1902-3 In the latter half of the 19th century, profit margins in the spinning industry came under increasing pressure. In addition to the growing strength of workers groups like the Operative Cotton Spinners Association, competition from abroad was increasing due to the export of automated textile machinery; something that had been unlawful until 1843. The growth in overseas yarn production also caused shortages in the supply of raw cotton and this raised raw cotton prices, putting further pressure on margins.

Sam Lansky of Idolator agreed, writing that "while evoking Elton John, the track sounds like it was recorded live in a piano bar, with audible background noise, like the spooling of film on a projector." Robert Copsey of Digital Spy said that Mars lists everything he should have done for the one he loved before she broke up with him. The lyrics find Mars regretful of not giving attention to his ex, as he "should have bought her" flowers and treated her better, as he reflects on their past relationship wishing for her new man to treat her better. Nick Messitte writing for Forbes found the track to be reminiscent of the "modern- day piano balladry" of Stevie Wonder and Donny Hathaway's "lonelier classics" such as "A Song For You" (1971), "Giving Up" (1971) and "For All We Know" (1972).

Its physical properties make it especially well- suited for DC transmission. Compared with conventional conductors such as aluminium-conductor steel-reinforced cable (ACSR), all aluminium alloy conductors (AAAC), aluminium conductor alloy reinforced (ACAR), aluminium conductor composite reinforced ACCR and ACCC conductor that conduct AC current well and DC current somewhat less well (due to the skin effect), Al-Ca conductor is essentially a single uniform material with high DC conductivity, allowing the core strands and the outer strands of a conductor cable to all be the same wire type. This conductor is inherently strong so that there is no need for a strong (usually poorly conductive) core to support its own weight as is done in conventional conductors. This eliminates the "bird caging", spooling, and thermal fatigue problems caused by thermal expansion coefficient mismatch between the core and outer strands.

There are two techniques for achieving reverse motion. The first is not an in-camera effect, but is achieved by printing the film backwards in an optical printer, starting from the final frame and working to the initial one. (This requires a true optical effect, since simply playing the film in reverse when exposing it onto a new negative causes it to come out upside down.) The second is an in-camera effect, achieved either by running the camera itself backwards or by turning the camera upside down. Most cameras are directly capable of running the film backwards (spooling from bottom to top rather than from top to bottom) and those that cannot can mostly be adapted into doing so by the simple expedient of rewiring the electric motor, switching its polarity (for DC motors) or changing over any two of its phases (for synchronous three-phase motors).

Many programmable ECU's/ECU software (eCtune for example) also offer an "anti- lag" feature designed for spooling turbos off the line or between shifts. The end result is similar but the method of action is a bit different to the versions described above (which are far more common in high-level professional motorsports such as rally) and is more commonly used for launching & drag racing. When a car, ready for launch is being held at its launch RPM limit some ECUs (whether by switch or additional throttle) can be programmed to retard the ignition by quite a few degrees and add a lot more fuel. This causes the combustion event to happen much later, as the engine is driving the air/fuel mixture out of the cylinder, closer to the turbine, causing it to spool up either at an earlier RPM than it would normally – assuming the engine unloaded waiting for launch or make more boost at the launch RPM than it would without engaging this feature.

The NC700X, NC750X, NC700S and NC700SA come with a six-speed manual gearbox while the Integra, NC700SD and the NC750X DCT come standard with a second generation of the six-speed dual- clutch transmission first used on the Honda VFR1200F. The version used on the Integra and NC700SD is lighter and more compact due to a simplified hydraulic circuit; a learning function has also been added to each of the drive modes to detect a variety of riding environments. The system uses heavy duty large- diameter clutches to deal with the rigours of use in stop/start city traffic. Drive mode on the transmission puts an emphasis on fuel economy by staying in as high a gear as possible as often as possible, keeping engine speeds low, between 2,000 and 2,500 rpm for steady speed cruising such as on freeways, while selecting Sport mode keeps the engine running at higher rpm as often as possible in order to supply more immediate power in situations where spooling the engine would be a hindrance.

Merrimack Hall served as the mill's store and community center The mill buildings, completed in 1900 and 1904, were designed by preeminent mill architects Lockwood, Greene & Co. Mill No. 1 was three stories and Mill No. 2 was five stories, both of brick with arched lintels and stone sills. Mill No. 1 had the carding, drawing, and picking areas plus a repair shop on the first floor; weaving on the second floor; and spooling, warping, and spinning on the third. The village is laid out along a grid pattern broken by a Y-shaped street which led to the mill and contained the superintendent's house in the Y. This design is identical to that of Merrimack's mill village in Massachusetts, platted in 1820. The houses followed several basic plans: Type A, a one-story, duplex shotgun house; Type B, a rectangular duplex with double central entry doors and a shed roof porch; Type J, a two-story I-house, usually with a shed roof rear addition; Type L, a two-story, cross-gable duplex with side entrances covered by shallow-pitched gable porches; and Type M, a one-story, hipped roof duplex with a shed roofed front porch.

However, Collins observed that this was "quickly subsumed into the granular storm as the layers gather and tempi increase", concluding that, notwithstanding audience consensus that "the overload last[ed] too long in the middle … It might cautiously be claimed that Mr. Stockhausen achieved a controversial success, and created a work that has reinvigorated his electronic music". Collins shared his shorthand notes, which he scribbled in the dark during the performance: > violent spasms of space, serial recurrences, a Copernican asylum, over- > literal crashes, rushing more and more beyond sense, like being inside > Stockhausen’s mind as he composes, a battle of enraged keyboardists in a > tempo war, granular roars, bass pedals and clatters, gurgling granules > accelerate, pushing the boundary of information, tapes spooling mercilessly, > a labyrinth of tone pulses, a multiplicity of collisions in an organ > factory, even poor synthesis can’t ruin this controlled chaos, wider and > wider dynamics and layering, building to the synchronies of planets, raging > layers, raging presets in a keyboard shop war, a fight at an audio > convention. Describing the UK premiere at the BBC Proms, Nick Emberley felt that "the Albert Hall sounded like a mighty beast woken from slumber".Emberley, Nick.