There's an old saying in politics (and life): Don't punch down.
|
|
When risen, punch down dough and portion into 3 oz. balls.
|
|
Punch down the risen dough and turn in onto a floured surface.
|
|
Joe fights back, then pulls up, knowing better than to punch down.
|
|
The other is pugilistic, bullying, determined to punch down and suck up: punch down anyone who dares to cross President Donald Trump, even if their targets are acting for the sake of the United States ... and suck up to the President.
|
|
When risen, punch down dough and portion into 8 (3-ounce|90 gram) balls.
|
|
And don't ever punch down by making an employee the butt of your joke.
|
|
One reason comedy is hard is because it's easier to punch down instead of up.
|
|
I was punching up…he decided to punch down and use his following to go after me.
|
|
It's not our intention at Waypoint High to punch down or drag games that never really had a chance.
|
|
Punch down the dough and either roll it out or stretch it onto an oiled pizza or sheet pan.
|
|
Perhaps this confidence is warranted, considering Chappelle simply does the same thing privileged groups have always done, to great success: punch down.
|
|
Because none of those men would ever punch down at their own people as harshly and routinely as Cosby's done throughout his career.
|
|
But if comedy has a sense of ethics at all, it might be centered on the cliché that one should never punch down.
|
|
The cover of this timely, political cookbook plays to my personal belief that baking is a release: Punch down that dough with force.
|
|
Matt Taibbi in his book "Hate Inc." writes about the proliferation of news stories that punch down at the local restaurant or marginalized citizen.
|
|
He was their sole focus, and for the fourth year in a row it let everyone else roam free or punch down against a mismatch.
|
|
It could be the fact that Canadian comedians tend not to punch down, or that they have a unique outsider's perspective on, say, American politics.
|
|
Hornets coach Steve Clifford didn't like the fact that his team couldn't deliver a knockout punch down the stretch, but he wasn't all that concerned either.
|
|
The rule in politics (and life) is that you don't punch down because, in so doing, you elevate the person below you on the totem pole.
|
|
There is the adage "Don't punch down," which sits like the shiny red lever of a fire alarm, irresistible for some writers who wish to pull it.
|
|
Arthur: I agree with you that it is more deplorable to punch down than it is to punch up — that hitting the poor and weak is generally unforgivable.
|
|
Gagliano — who noted that he knew and liked McCabe earlier in his career — said that it was "unequivocally wrong" for the president to "punch down" at FBI officials.
|
|
But Donald Trump is also the worst kind of troll, who has taken every opportunity imaginable to punch down at marginalized groups like Muslims, Mexicans, disabled people, and women.
|
|
Punch down the dough by folding the edges into the center, releasing as much of the gas as possible, and turn it out onto a large sheet of plastic wrap.
|
|
In contrast, and despite their "anti-elite" pretensions, many cometicians "punch down", identifying with the majority by making fun of those at the bottom of the socioeconomic scale, often underprivileged minorities.
|
|
The second half of the league's best one-two punch down the middle doesn't get quite as much attention as Sidney Crosby, but he's been almost as good for most of their careers.
|
|
As soon as the opponent is convinced the fighter will step back, and is taking that "extra step" in anticipation, he is ripe to be countered with a good straight punch down the pipe.
|
|
However, if Saturday night is any indication, were Trump to swap his role as commander-in-chief for comedian-in-chief, he would likely be a cruel, heartless comedian who would "punch down," mocking those already struggling.
|
|
"I think it's quite lazy humor to punch down," said Jamil, who used the question as an opportunity to distinguish between the type of humor her new show will explore, which focuses on players ranking hilarious real-life situations.
|
|
To Chappelle's detractors, his cancelation is a clear-cut moral issue like all the others: Chappelle used his platform to punch down, to layer jokes on top of other people's suffering, and therefore should no longer be given that platform.
|
|
Rasky said the super PAC's messaging will not "punch down" an does not plan to attack Biden's primary opponents, instead starting by tracking Iowans' views of Biden today and determining the extent of the damage caused by Trump's anti-Biden ads.
|
|
Trump, meanwhile, uses his considerable bullying power to punch down — at Daniels, at the many women who have accused him of sexual assault or harassment, and at a variety of other ordinary Americans who have considerably less power than he does.
|
|
He sent Julius Randle into the game at center and Josh Hart in at shooting guard, and the small lineup helped erase a 19-point deficit before Kentavious Caldwell-Pope provided the knockout punch down the stretch in Los Angeles' 103-94 victory at Staples Center.
|
|
When: Friday, April 183, 8–9pm & Saturday, April 16, 215–218pm Where: Machine Project (28 D North Alvarado Street, Echo Park, Los Angeles) Certain forms of comedy are labelled as offensive or exclusionary — and they certainly can be when they punch down — but this critique doesn't take into account the positive aspects of humor, the way it can work to form bonds or build community.
|
|
Punch-down blocks are intended to connect individual conductors punched down into each position in the block with a special punch-down tool. Punch-down terminations are also generally seen in telephone and network connectors, in patch panels and distribution frames, and in telephone equipment such as PBXs.
|
|
BIX (Building Industry Cross-connect) is part of a telephony cross-connect system (Integrated Building Distribution Network - IBDN) created in the 1970s by Nortel Networks. As a system, it consists of various sizes of punch-down blocks, cable distribution accessories (such as moulded rings and strips), and a punch-down tool to terminate wires at the punch-down block. The BIX cross- connect system as a whole is certified for Category-5e. The BIX cross-connect system is primarily composed of two parts: the mounts, and the connectors.
|
|
In multi-line installations such as businesses or apartment buildings, the demarcation point may be a punch down block. In most places this hardware existed before deregulation.
|
|
A punch-down tool with interchangeable blades Krone blocks Details of how wires are pushed into the clips of 66 Block A tool called a punch down tool is used to push the wire down firmly and properly into the slot. Some will automatically cut any excess wire off.Call recording blog, last accessed 30 Apr 2007 The exact size and shape of the tool blade varies by manufacturer, which can cause problems for those working on existing installations, especially when there is a poorly documented mix of different brands. Punch-down blocks are a very quick and easy way to connect wiring, as there is no stripping of insulation and no screws to loosen and tighten.
|
|
Punch-down blocks are often used as patch panels, or as breakout boxes for PBX or other similar key phone systems with a 50-pin RJ21 (Amphenol) connector.Versadial, Call Recording Terms/Definitions, last accessed 8 June 2015 They are sometimes used in other audio applications, such as in reconfigurable patch panels. Often a separate tool known as a spudger is used to remove small stray pieces of cut off wiring stuck within punch-down blocks.
|
|
This cable is commonly connected using punch-down blocks and modular connectors. Most Category 5 cables are unshielded, relying on the balanced line twisted pair design and differential signaling for noise rejection.
|
|
Step Forward Punch Down 進步栽捶 40\. Rotate Body Away Body Punch 翻身撇身捶 41\. High Pat Horse 高探馬 42\. Right Separate Hands 右分手 43\.
|
|
Nortel Circuit Card Reference 1Nortel Circuit Card Reference 2 The port connection may be through a Punch-down block or a Modular connector called a TELADAPT plug (or socket) which is Nortel parlance for phone connector.
|
|
Similarly, stranded wire can be used on punch-down blocks, even though they were originally designed for solid wire connections. Marginal practices like these are strongly discouraged in large or mission-critical installations, because they can introduce extremely troublesome intermittent connections, as well as more-obvious outright bad connections. Once the contact blades in a punchdown block are "sprung apart" by poor practices, the entire block often must be replaced to restore reliable connections. In addition, punch-down blocks are being used to handle larger numbers of faster data signals, requiring greater care and proper procedures to control impedance and crosstalk.
|
|
The punch-down blocks on patch-panel and wall-port jacks are designed for use with solid core cable. These work via the insulation-displacement method, whereby the device pierces the sides of the insulation and "bites" into the copper conductor to form a connection.
|
|
His film and television credits include the television series The City, The Famous Jett Jackson, The Jane Show, XIII: The Conspiracy and The Listener, and the films Phantom Punch, Down in the Delta, Vendetta, Jett Jackson: The Movie, John Q and Brown Girl Begins.
|
|
A split-50 M or 66 Block with bridging clips A 110 punch-down block A punch- down block (also punchdown block, punch block, punchblock, quick-connect block and other variations) is a type of electrical connection often used in telephony. It is named because the solid copper wires are "punched down" into short open-ended slots which are a type of insulation-displacement connector. These slots, usually cut crosswise (not lengthwise) across an insulating plastic bar, contain two sharp metal blades which cut through the wire's insulation as it is punched down. These blades hold the wire in position and make the electrical contact with the wire as well.
|
|
It is possible to insert wiring without the proper tool, but this requires great care to avoid damaging the connectors. For example, pushing a screwdriver down the middle of the block is a bad practice as it forces the two blades of the terminal post apart, leading to bad contacts. It is also possible to punch-down multiple wires on top of each other in a single post of a punch-down block, but this practice is discouraged because of reliability concerns. If these multiple wires are of different thicknesses (wire gauges), it is even more likely that the thinner wire will develop contact problems.
|
|
In some cases, the user may need to twist the cup or flex the vaginal muscles to ensure the cup is fully open. If correctly inserted, the cup shouldn't leak or cause any discomfort. The stem should be completely inside the vagina. There are various folding techniques for insertion; common folds include the c-fold, as well as the punch-down fold.
|
|
A 110 punch block. A 110 block is a type of punch block used to terminate runs of on-premises wiring in a structured cabling system. The designation 110 is also used to describe a type of insulation displacement contact (IDC) connector used to terminate twisted pair cables, which uses a punch-down tool similar to the older 66 block.
|
|
In February 2019, Series 1 of Renkow's television series, Jerk, was released by BBC Three. It was subsequently replayed on BBC One, and was approval for a second series was announced in September 2019. The series largely built on the characters established in A Brief History of Tim. In April 2019, Renkow performed a one-man show at London's Soho Theatre entitled Tim Renkow Tries to Punch Down.
|
|
Point of appearance is a generic term for any point in a telephone/data circuit from which a technician can test or pull stats. Some appearances are virtual, such as a Digital cross connect system computer terminal. Others are physical, like a punch down COSMIC frame where a technician can place a test set, or a heat coil socket. In the outside plant there is an appearance at the cross box, pedestal, and network interface.
|
|
During bulk fermentation straight-dough recipes may instruct a baker to "punch down" or "deflate" the dough, while artisan bakers will use terms like "stretching", "folding", and "degassing", meaning to expel gas from the carbon dioxide bubbles that have formed. Sponge doughs will need multiple mixing periods. Overproofing occurs when a fermenting dough has rested too long. Its bubbles have grown so large that they have popped and tunneled, and dough baked at this point would result in a bread with poor structure.
|
|
After pressing, the wine is left to settle in concrete vats over the winter before it is racked into barrels or other containers. Maury wines are often fermented and settled in large concrete fermentors such as these. The large opening allows cellar works to punch down the cap during maceration. Since the fermentation process is halted rather quickly, the flavors of Maury do retain some of the natural primary grape aromas of Grenache along with some of the early fermentation esters that develop.
|
|
Dorothy is quite durable and much stronger than any human, able to punch down a brick wall with one blow or leap several dozen feet into the air. She has amazing balance, as seen during her moments of contemplation while standing precariously on the edge of Roger's balcony. R. Dorothy can run or bicycle at superhuman speed and does not require oxygen to operate. She shows superhuman coordination, performing effortless gymnastics and is able to steer a car with her foot while standing on the hood.
|
|
During regular usage, small pieces of insulation can become stuck inside the 110 block contacts; this renders that given pair unreliable or unusable, until the pieces are removed. A tool known as a spudger can be used to remove excess insulation pieces. The wire hook which comes on many punch down tools can also be used to remove wire pieces. A new wire inserted over an existing insulation remnant may be unreliable, as the 110 IDC was designed to hold only a single wire per contact.
|
|
66 Block B series with 6 clips in each row. Jumper wires on the left connect the top pair with the bottom pair, allowing to split up to 10 devices. Circuit pairs are connected to the block with a punch-down tool by terminating the tip wire on the leftmost slot of one row and ring wire on the leftmost slot of the row beneath the mating tip wire. Typically, a 25-pair cable coming from the phone company is punched down on the left side of the block in pairs.
|
|
The body of a plastic spudger is usually contoured to offer a better grip. Some spudgers are made of orangewood, used in electronics assembly and soldering because of its heat tolerance and dense grain. The same orangewood sticks are commonly used in filmmaking, manicure and pedicure, but these industries do not use the term "spudger". In telecom applications like punch-down terminal blocks and cell phone repair, the spudger is made of a non-conductive material to prevent transmission of a static shock or direct short to sensitive electrical components' inputs or outputs.
|
|
Boldirev combined with rookie Steve Yzerman to form an excellent one-two punch down the middle, and helped Detroit back to the playoffs for the first time since 1978. In 1984–85, Boldirev played in his 1000th NHL game and notched his 500th assist, but his production waned as he failed to notch 50 points for the first time since 1973. He retired at the end of the season with career totals of 361 goals and 505 assists for 866 points in 1052 NHL games. He currently does periodic work on behalf of the Blackhawk Alumni Association.
|
|
Insulation displacement connectors are usually used with small conductors for signal purposes and at low voltage. Power conductors carrying more than a few amperes are more reliably terminated with other means, though "hot tap" press-on connectors find some use in automotive applications for additions to existing wiring. A common example is the multi-conductor flat ribbon cable used in computer disk drives; to terminate each of the many (approximately 40) wires individually would be slow and error-prone, but an insulation displacement connector can terminate all the wires in a single action. Another very common use is so-called punch-down blocks used for terminating unshielded twisted pair wiring.
|
|