176 Sentences With "power switch" | Random Sentence Generator

Part of me respects him for such a ruthless power switch.

The Momentum's lack of a power switch, however, impressed me less.

On the handle is the power switch and a cold shot button.

The power switch is also a button rather than a physical toggle.

There's a power switch on the bottom and a hidden button in its belly.

Simply place the pieces inside the water-filled case and press the power switch.

Mattel says parents can turn the device off at any time via the power switch.

When the power switch appears on your screen, swipe it to turn your phone off.

Instead, though, I constantly pushed the volume rockers when I meant to hit the power switch.

The new version does not have an optical input and the power switch is a soft switch.

Before you ever get going on prepping your shot, make sure to turn the power switch on.

The side of the print is home to the power switch and USB port, which I never used.

Fire Chief Angel Crespo said a power switch got overheated, causing a 2,000-gallon mineral oil tank to explode.

It supports camera input as well as HDMI out and even has a physical power switch and IR blaster.

The WH-1000XM3 has no physical power switch, a feature that lets you ensure your headphones are completely off.

Along with the ventilation at the base, the Supersonic also includes a power switch and a cool-air only button.

But the abrupt power switch also caused a falling-out between Mr. Sánchez and Albert Rivera, the leader of Ciudadanos.

Instead, the power switch is embedded in the actual frame so that folding or unfolding them powers them off and on.

Professor Einstein uses dual-proprietary battery packs — one goes in each foot — and there's a small power switch on his lower back.

The printer uses a standard AC power cable, has a power switch on the side and a status button on the front.

One of his favorite pieces of work is found late in the game and, at first glance, is insignificant: a power switch.

But now, using measurements of ion currents inside a single sperm, they've found the power switch—and a way to turn it off.

The base has a power switch and heat buttons with various levels to customize your desired settings, as well as an attachment release.

If you get a dangling tie caught in a paper shredder, you've got a few seconds to reach for the power switch or plug.

It's effortless to remove the iPad, and you can just flip the power switch on the keyboard if you want to turn it off.

The power switch doubles as a way to control the different modes and there's also an adjustable thermostat so you can customize the temperature.

Ditto for the placement of the buttons: power switch on the right side, volume rocker on the left and a dedicated Bixby button below it.

The power switch on the tiny flashlight symbol in the Control Center actually toggles on and off depending on whether the feature is in use.

I ejected my iPod, snapped the lanyard cap back on, slid the power switch to shuffle, slipped in a pair of wired headphones, and pressed play.

While it doesn't have an actual power switch, you just plug it in to get brewing and it automatically switches off after nine minutes of inactivity.

The proximity sensor on the right effectively works as a power switch for the whole earbud, and there's also a handy volume rocker on the top.

A power switch that doubles for Bluetooth pairing, an LED button, and a button for starting or stopping phone calls are on the right ear cup.

There are other luxurious touches as well, like the fact that there's no physical power switch — when you unfold the Solo Pros, they automatically turn on.

With that, all of the high-tech design elements are present, like left-to-right power switch, the gray reset button, and the red volume slider.

While neither nation is known to have actually flipped off the power switch in the other country, Russia did shut off the electricity in Ukraine in December 2015.

The rest of the speaker is heavily inspired by Lamborghini's design style as well, including a power switch shaped like the push button starter that actual Lamborghinis have.

At least for overhead lights, installing a smart power switch resolves the problem, letting you flip them on and off without destroying your ability to use an app.

All of the buttons are positioned on the right cup, including a power switch on the side and volume up and down flanking play/pause button on the bottom.

Thanks to the various meme edits, this button serves as a radio power switch, blasting tunes that Mando keeps switching off every time Baby Yoda turns it back on.

The SE 2 won't have FaceID, which will allow for a smaller notch, but it will have TouchID integrated into the power switch on the side of the phone.

Among other gainers, Legrand rose 3.8 percent on the back of its well-received results at the French power switch maker, whose sales growth in the first half beat expectations.

Click here to view original GIFIt also not only knows how to push a vacuum cleaner across a floor, it can even operate its tiny power switch without human intervention.

The Hubble Telescope, for example, was floated into space, some intelligent scientists cloned a sheep and named it Dolly, and the power switch was flipped to set the World Wide Web online.

The Echo is in my kitchen — the Mr. Coffee is in my kitchen — I was literally close enough to reach out and touch the darn power switch myself when this all occurred.

Mophie says the company worked closely with Apple to design the battery, which has a fabric exterior along with the indicator lights and power switch that comes with newer Mophie battery packs.

Then it started to sing when its power switch was turned off, and she decided that maybe there was something weird about the doll, and maybe she should just throw it away.

On the stick are six clicky, physical buttons (Apple killed those too), and a combo shuffle-power switch that transformed the 1203 songs I could store into a soundtrack for brooding carpool rides.

This wouldn't have been as big of an issue if Essential had added a little texture to the power switch, like OnePlus did with its notification switch, to help distinguish between the two.

The fleet of the 1940s was outfitted with single regular-frequency-band radios and the power switch was safety-wired in the "off" position so that the crews could use only in abject emergencies.

Featuring R2-D2's dome head for the lamp's shade, and other astromech detailing on the base, the lamp also includes a 60-inch cord with an inline power switch, and uses 40-watt bulbs.

There are only three buttons on the phone: two volume rockers and a power switch, which for some reason, is awkwardly-placed below the volume buttons about midway down the right edge of the phone.

On the afternoon of September 220, 211, almost exactly a year before Maria made landfall, a single power switch overheated at the island's largest power plant, causing a cascading blackout that snuffed out the lights for 2450 million customers.

One side lets you plug in headphones to monitor sound, the other side has a XLR 1/4 combo input with a phantom power switch if you want to use other sound sources like a microphone or electronic instrument.

If I have to nitpick (and, at this price, I do), I find Nikon and Sony's placement of the power switch faster to access, and I might have appreciated chunkier buttons on the rear of the S1 for easier operation.

Authorities reportedly raised the prospect that a user could activate the function by holding down a button for a certain amount of time while a smartphone could could have its panic button activited by repeatedly toggling the power switch on the phone.

A pair of two AAA batteries is needed to power the $160 helmet's LEDs on either side, but you should rarely have to worry about swapping them out for a fresh pair thanks to a power-switch that ensures they only glow when you're really trying to impress someone.

The Transmitter has two action buttons, a pause button, a power switch and is powered by six AA batteries.

PCB of a power supply from an IBM XT clone A typical XT PSU power switch, which is an integral part of the PSU.

Besides being the first Palm device with a hard drive, the LifeDrive introduced other features that were new to Palm devices, such as a three-position power switch (on, off, keylock), and a dedicated screen rotation button. The new power switch became a feature of the Treo smartphone line; the screen rotation button also appeared on the TX, but was later phased out among Palm devices, with dedicated accelerometers taking over the task of properly orienting the screen.

The minimum required voltage is lower, about 15 V, below which the radio oscillates. An electrolytic capacitor is connected in parallel to the battery to improve stability. The power switch is coupled with the volume control.

For example, to prevent access to the inside of an electric kiln while it is operating, a trapped-key system may be used to interlock a disconnecting switch and the kiln door. Whenever the kiln power switch is turned on, the key is automatically held by the interlock, and cannot be manually removed. In order to open the kiln door, the power switch must first be turned off, which releases the key and allows it to be removed from the interlock. The key can then be used to unlock the kiln door.

This simple-to-use flash used an infrared preflash to judge the distance to the subject, and only had two buttons; a power switch and a film speed setting which toggled between 100 and 400 ISO film speed.

The IIsi also includes a NuBus expansion slot that the LC II lacks, and can be powered on via a button on the keyboard, unlike the LC range which has a power switch on the back of the unit.

On the rear panel, there are three pedal inputs, two 1/4" audio jacks, a volume wheel, a 1/8" stereo headphone jack, USB type A and B jacks, an input for the DC power supply, and a power switch.

Version 1 has a single-position power switch, either on or off, whereas version 2 has a 3-position power switch, centre off, forward for use on carpets, back for use on smooth floors. This affects the stall-detection in the electronics, as the original version seems to have been designed to run on smooth floors, and easily stalls when attempting to turn on carpet. The test program for version 1 runs the unit forwards, pauses, then runs backwards; in version 2, the model runs forward, then turns 180 degrees, runs forward again, then backs up a little.

The front panel controls of the Multimonica II from left to right are: power switch and overall volume knob; six selector switches for different preset sounds of the synthesizer; tuning knob; two selector switches for different harmonics filtering; three switches for the vibrato speed and amplitude; power switch for the blower fan. The circuit is based on Philips 13204 X, Philips EL41, Telefunken EF41 tubes for Multimonica I, and EL41; ECC40; EF40 tubes for the second series. (English: ) A photo of a third model can be found on the World Wide Web, looking like a simplified version of Multimonica I (without microphone input).

While the key is removed from the switch interlock, a plunger from the interlock mechanically prevents the power switch from being turned on. Power cannot be re-applied to the kiln until the kiln door is locked, releasing the key, and the key is then returned to the power switch interlock.Harry Fraser, The electric kiln: a user's manual 2nd edition, University of Pennsylvania Press, 2000, page 41 A similar two-part interlock system can be used anywhere it is necessary to ensure the energy supply to a machine is interrupted before the machine is entered for adjustment or maintenance.

Two graphics modes were available: 720 × 256 pixels in four colours, or 720 × 512 in two colours. The Triple X had novel touch-sensitive "soft" power switch. When switching off, this commanded the operating system to shut down gracefully before powering down.

Murray Forman (2000). ‘Represent’: race, space and place in rap music. Popular Music, 19, pp 65-90. In 1986, the first radio show in Spokane to play rap and hip hop on commercial radio was “The Power Switch” on POWER 104 FM (KXVO).

It was an electric generator combined with the mechanical drive of the vehicle itself. His "small transformer" for low voltage was widely implemented according to the "Kiepach-Weiland System". He also patented a power switch. He was active in various other areas of mechanics and electronics.

Detail of the Optigan's chord buttons, special effect rocker switches, power switch, tempo adjustment wheel and stereo balance wheel. The adhesive-backed metal "Stereophonic" trim plate covers the unused reverb control opening on this example The Optigan looked like a scaled-down version of the electronic organs of the day. The various cabinet designs and their matching benches were simulated wood made out of a molded plastic the manufacturer dubbed "Temperite" and finished with matching speaker grille cloth and occasionally reverb units inside the unit. A mechanical reverb unit and cabinetry with genuine wood veneer were available as extra-cost options; the control for the reverb on units so equipped is located below the power switch.

Notable personalities on "Power 104" included Lee St. Michaels and Rob Fisher (Leroy & the Pepper); Tracie Lee; Jeff Melton; Jim "The Bod" Larsin; Greg "The Blade" Young; and TJ Colllins. In 1986, Collins began a show called "The Power Switch" where he "switched" the format and played hip hop and R&B; not played on other radio stations in Spokane at the time; thus, becoming the first DJ to play hip-hop on commercial radio in Spokane. Collins also featured local and regional unsigned rap artists and began airing mixes by local DJ, GrandMixer GMS. The Power Switch was a very popular show that originally aired for two hours every Sunday night.

They are essentially identical to their "C" series, with the only difference being the power switch installed on the handle. The first model was the R, followed by the 2R, 3R and 4R. In 1970, input from Kirby distributors, dealers, management and customers guided Kirby engineers in developing the Kirby Classic.

The back panel has quarter-inch jacks for recording data to cassette tape (one also doubling as a footswitch input), MIDI in and out DIN connectors, separate quarter-inch audio outputs for each of the two sounds and a mix audio out (both sounds combined), a power switch, and a fuse socket.

The earlier models are now rare, since their production was halted by the outbreak of World War II, and many units may have been lost in the war. Multimonica II was released by the end of the ’40s. The front panel controls of the Multimonica I from left to right are: gain knob for the microphone input; power switch and overall volume knob; synthesizer/amplifier selector; power switch for the blower fan; tuning knob; four selector switches for different harmonics filtering of the synthesizer sound; four selectors for the different loudspeakers; vibrato switch. The Multimonica II featured no microphone input, and only one loudspeaker, but provided more types of harmonics filtering, and the electromechanic vibrato was changed to a tube based and more sophisticated design.

In 1976, Heet Sound introduced the first EBow at the NAMM Show. It featured an internal, string vibration triggered automatic power switch, a chromium-plated ABS plastic shell, a red LED power indicator, and a police- style form fitted black leather holster, embossed with the EBow logotype. In later years, five subsequent EBow models were introduced, all of which consisted of internal variations of the original EBow circuit and actuator coils, as well as color changes to the original plastic shell and EBow logotype, both of which remained essentially unaltered since the introduction of the EBow, with the exception of the addition of an external power switch on the back. The latest EBow model is the "Plus EBow", which is switchable between "standard mode" and "harmonic mode".

Non-reverb equipped Optigans feature a metal plate which reads "Stereophonic" in raised relief and which hides the unused opening. Reverb-equipped units had a slightly different plate which read "REVERB Stereophonic" affixed immediately to the left of the rocker switches and above the power switch. According to optigan.com, two piano bar prototypes were produced.

The S90 is a large black synthesizer with brown side panels and might give the impression of a digital synthesizer with its green display. 71 push buttons are distributed across the front panel, save for the power switch on the back. Pitch bend and modulation wheels are placed above the keyboard aligned to the left.

Programs and data are loaded and saved onto compact audio cassettes. It uses only four silicon chips and a mere 1 KB of memory. There is no power switch or any moving parts with the exception of a VHF TV channel selector switch present in some models. It has a pressure-sensitive membrane keyboard.

Robopanda operates in three different modes controlled by a 3 way power switch: Training mode, Friend mode, or Menu mode. After 4 minutes without touch input, Robopanda will enter Sleep mode. The power/mode switch must be manually turned off and on again to exit Sleep mode. In Training mode, Robopanda will explain his various functions and sensors.

The classical Unimog is rear-wheel drive vehicle, meaning that the rear axle is directly connected to the gearbox. Turning on front wheel drive automatically locks both axles, without torque compensation. The mechanical lever that turns on all wheel drive has a third position that locks front- and rear differentials. As of 1963, a pneumatic power switch was used instead of a lever.

The articulated screen The 650D has roughly the same dimensions as the 600D, and apart from the touchscreen has largely the same physical controls as previous models. One notable difference is that the two- position power switch of the 600D is replaced with a three-position switch on the 650D, with the added position used to activate the video shooting mode.

During the day computer problems on the ISS were further resolved, with all six processors available (four online and two standby). Following the successful attempt to revive four channels on flight day 8 after bypassing what appeared to be a faulty power switch with external cabling, cosmonauts Fyodor Yurchikhin and Oleg Kotov repeated that same modification on the last two channels.

The enclosure also included preset cross-overs and equalization. The outside of the enclosure was simple: an AC cord, input connectors, and 4-pin connectors that plugged into the loudspeakers. The original model did not have level controls or a power switch. While at McCune, John Meyer started doing sound reinforcement work with outdoor classical music symphony concerts at Stanford University.

Cybiko Xtreme with antenna folded down, running the Main Desktop. There were two models of the Classic Cybiko. Visually, the only difference was that the original version had a power switch on the side, whilst the updated version used the "escape" key for power management. Internally, the differences between the two models were in the internal memory, and the location of the firmware.

The adapter itself was mains powered with its own power switch matching the one on the BBC microcomputer. Connection to the computer was via a ribbon cable and the only other connector on the adapter was a female 75ohm TV aerial (in) connector. The adapter contained four manual tuning wheels to receive signals from four different broadcast channels. Rear view of the adapter.

There are two basic differences between AT and ATX power supplies: the connectors that provide power to the motherboard, and the soft switch. In ATX-style systems, the front-panel power switch provides only a control signal to the power supply and does not switch the mains AC voltage. This low-voltage control allows other computer hardware or software to turn the system on and off. Since ATX power supplies share both, the same width and height (), and the same mounting layout (four screws arranged on the back side of the unit), with the preceding format, there's no major physical difference preventing an AT case to accept an ATX PSU (or vice versa, if the case can host the power switch needed by an AT PSU), provided that the specific PSU is not too long for the specific case.

On January 22, 2008, Apple released a pink version of the 8 GB iPod Nano. Combining elements from previous generations of the iPod Nano, the third-generation Nano had an aluminum front plate and a stainless steel back plate. The Nano also sported a new minimalistic hold switch, similar to the iPod Shuffle's power switch, which had been moved to the bottom of the player.

The Menacer has no power switch: it automatically activates when aimed at the television and turns off after 30 seconds without input. The Super Scope fully drains its batteries when left on. Menacer's Accu-Sight option puts crosshairs on the screen to eliminate the need to aim manually through the sights. The gun does not have a "turbo" mode for continuous fire, unlike the Super Scope.

The integrated gate-commutated thyristor (IGCT) is a power semiconductor electronic device, used for switching electric current in industrial equipment. It is related to the gate turn-off (GTO) thyristor. It was jointly developed by Mitsubishi and ABB. Like the GTO thyristor, the IGCT is a fully controllable power switch, meaning that it can be turned both on and off by its control terminal (the gate).

On the front of the device it has an eject button, mini-phono sound out jack, and a volume knob. On the rear it has a power switch, power input, two Centronics 50-pin SCSI outputs, and an audio RCA connector. With appropriate software it would run on any Macintosh with a DB-25 connector, or an Apple II with an Apple II SCSI interface card.

The SCR-536, which incorporated five vacuum tubes in a waterproof case, had no separate power switch. Instead the radio turned on when the antenna was pulled out, and off when it was retracted. The SCR-536 weighed 5 pounds with batteries and 3.85 lb without (2.3 and 1.75 kg). The unit operated in AM voice mode between 3.5 and 6.0 MHz frequency range.

Cybiko Classic: There were two models of the Classic Cybiko. Visually, the only difference was that the original version had a power switch on the side, whilst the updated version used the "escape" key for power management. Internally, the differences between the two models were in the internal memory, and the location of the firmware. Cybiko Xtreme: The Cybiko Xtreme was the second-generation Cybiko handheld.

ARW extension, Sony's extension for raw. The rear panel has the same layout as the Sony Alpha 55 and whilst the LCD hosts a 4:3 aspect ratio compared to the A55's 16:9 it has the same resolution and adjustability. With a few minor layout changes one easily noted oddity is the reversal direction of the power switch compared with the A55 believed to result in an easier operation.

A power switch and front and rear brake levers are positioned on the handlebar. As a supplement to or replacement for electric power, the C5 can also be propelled via bicycle-style pedals located at the front of the cockpit. The maximum speed of an unmodified C5 is . At the rear of the vehicle is a small luggage compartment with a capacity of 28 litres (1 cu ft).

The Apple Wireless Mouse is a one-button mouse built for Macintosh computers. It was released in September 2003, although it is not widely recognized that it was Apple's primary wireless mouse until 2005. It interacts over Bluetooth 1.1 wireless technology. It included two non-rechargeable AA lithium batteries, and had a power switch on the bottom that also protected the optical sensor while the mouse was not in use.

Type CR2032 button cell, most common CMOS battery. The memory battery (aka motherboard, CMOS, real-time clock (RTC), clock battery) What are CMOS or Clock Batteries?Ask a question » Replacing the battery of your motherboard (CMOS battery) is generally a CR2032 lithium coin cell. This cell battery has an estimated life of 3 years when power supply unit (PSU) is unplugged or when the PSU power switch is turned off.

The light metering system's power switch turned on the meter, removed the lock from the shutter trigger button and let the film advance lever pop out 15 degrees from the camera body, all in one flick of the thumb. In the axis of the main switch, a multiple exposure button is located. Pressing this while cocking the shutter prevents advancing the film. The frame counter is also blocked, thus preserving the correct frame count.

Cassini–Huygens spacecraft to Saturn used MOSFET power switch devices for power distribution. In the space industry, MOSFET devices were adopted by NASA for space research in 1964, for its Interplanetary Monitoring Platform (IMP) program and Explorers space exploration program. The use of MOSFETs was a major step forward in the electronics design of spacecraft and satellites. The IMP D (Explorer 33), launched in 1966, was the first spacecraft to use the MOSFET.

Columbus provides a maximum of 1.25 kW per Columbus-EPF location. Each Columbus-EPF location is connected to two 120-Vdc power feeders, each of which has a maximum allocation of 1.25 kW. Switching between the power feeders is done via the payload power switch box in Columbus and requires the power feeders to be powered down. The maximum on-orbit mass of an external Columbus-EPF payload, including the adapter plate, is 290 kg.

In 1997, TVERC worked with the Tennessee Clean Air Task Force. In 1998, TVERC engaged with TVA to launch the Green Power Switch program, giving TVA rate-payers the option to support wind, solar, and biogas renewable resources. In 1999, TVERC was renamed the Southern Alliance For Clean Energy (SACE) as the organization expanded its focus beyond the TVA service area to encompass clean energy efforts with other utility providers in Florida and South Carolina[#].

Illuminated power switch on a power strip German master-slave remote controlled power strip Some power strips include a master switch to turn all devices on and off. This can be used with simple devices, such as lights, but not with most computers, which must use shutdown commands from the software. Computers may have open files, which may be damaged if the power is simply turned off. Some power strips have individually switched outlets.

The 1957 elections saw the Indian National Congress win 150 seats out of 208, and S. Nijalingappa was retained as Chief Minister. Mysore state was renamed Karnataka in 1973. The Congress would retain power in Karnataka until 1983, when the Janata Party formed the first non-Congress government in Karnataka with the support of other smaller parties. Subsequent elections have seen power switch between the Congress, Bharatiya Janata Party, and other parties.

For "addressing climate change by committing to a clean energy future", the World Wildlife Fund awarded Aspen the 2005 Power Switch! Pioneer award. In June 2005, Klanderud represented Aspen at the "Sundance Summit: A Mayors Gathering on Climate Protection," held in Salt Lake City, which examined ways that cities could cut and offset carbon emissions. Aspen was the smallest municipality to be invited to the three-day summit, which included major U.S. cities like Seattle and Chicago.

Torque generated by the drive causes the induction motor to run at synchronous speed less the slip. If the load drives the motor faster than synchronous speed, the motor acts as a generator, converting mechanical power back to electrical power. This power is returned to the drive's DC link element (capacitor or reactor). A DC-link-connected electronic power switch or braking DC chopper controls dissipation of this power as heat in a set of resistors.

This type of water bath has extra control for shaking, which moves liquids around. This shaking feature can be turned on or off. In microbiological practices, constant shaking allows liquid-grown cell cultures grown to constantly mix with the air. Some key benefits of shaking water bath are user-friendly operation via keypad, convenient bath drains, adjustable shaking frequencies, bright LED-display, optional lift-up bath cover, power switch integrated in keypad and warning and cut-off protection for low/high temperature.

This mode will have a detrimental effect on fuel economy. Hyundai has a Norm/Power switch next to the gearshift for this purpose on the Tiburon. Some early GMs equipped with HYDRA-MATIC transmissions used (S) to indicate Second gear, being the same as the 2 positions on a Chrysler, shifting between only first and second gears. This would have been recommended for use on steep grades, or slippery roads like dirt, or ice, and limited to speeds under 40 mph.

The magnetic field produced by the current attracts a moving ferrous core held back under spring tension or gravitational pull. As voltage increases, so does the current, strengthening the magnetic field produced by the coil and pulling the core towards the field. The magnet is physically connected to a mechanical power switch, which opens as the magnet moves into the field. As voltage decreases, so does the current, releasing spring tension or the weight of the core and causing it to retract.

A multiple exposure picture of Tesla sitting next to his "magnifying transmitter" generating millions of volts. The long arcs were not part of the normal operation, but only produced for effect by rapidly cycling the power switch. There, he conducted experiments with a large coil operating in the megavolts range, producing artificial lightning (and thunder) consisting of millions of volts and discharges of up to in length,Gillispie, Charles Coulston, "Dictionary of Scientific Biography;" Tesla, Nikola. Charles Scribner's Sons, New York.

Laptops powered by the Intel Centrino Processor Technology or newer (with explicit BIOS support) allow waking up the machine using wireless Wake on Wireless LAN (WoWLAN). In most modern PCs, ACPI is notified of the "waking up" and take control of the Power up. In ACPI, OSPM must record the "wake source" or the device that is causing the power-up. The device being the "Soft" power switch, the NIC (via Wake-on-LAN), the cover being opened, a temperature change, etc.

Other popular video game systems also have their own share of unique pirate multicarts. Unlike the Famicom, the Nintendo Game Boy multicarts have a variety of different, innovative multicart designs. Standard-sized Game Boy multicarts have either a game selection menu like the NES multicarts, or require quick toggling of the Game Boy power switch to select through games. Most of them incorporate an external soft reset button (not available on any original cart), so you can reset the game without powering off the system.

In hydraulic elevator systems, emergency power will lower the elevators to the lowest landing and open the doors to allow passengers to exit. The doors then close after an adjustable time period and the car remains unusable until reset, usually by cycling the elevator main power switch. Typically, due to the high current draw when starting the pump motor, hydraulic elevators are not run using standard emergency power systems. Buildings like hospitals and nursing homes usually size their emergency generators to accommodate this draw.

Otto engines were equipped with a number of different mechanism designs to trigger sparking. The Otto is one of the first engines to use a spark plug, which is a device that produces a small electric spark to ignite the fuel charge. This usually consisted of a pivoting trip-arm that briefly grabs a power switch lever and gives it a quick pull. The switch lever is then released and allowed to snap back to its original position in preparation for the next cycle.

This means everything from the power supply to the bias control board all have 2 identical and independent circuits per channel to separate the 2 stereo channels. This also minimizes the Total Harmonic Distortion (THD) within the amplifier down to 0.08%. The AU-11000 has its own power protection built into the amplifier. When the power switch is turned to the "ON" position, the power light comes on as green for a second, and turns red for a few seconds until the power protection circuitry has confirmed it is safe to power-up.

Mid-1970s Stylophone being played The Stylophone is a miniature analog stylus- operated keyboard. Invented in 1967 by Brian Jarvis, it entered production in 1968, manufactured by Dubreq. It consists of a metal keyboard made of printed circuit board and played by touching it with a stylus—each note being connected to a voltage-controlled oscillator via a different-value resistor—thus closing a circuit. The only other controls were a power switch and a vibrato control on the front panel beside the keyboard, and a tuning potentiometer on the rear.

The amp also featured a solid-state rectifier to increase reliability. Controls include a Normal volume, Top Boost Volume, Treble and Bass controls, Reverb Tone and Level controls, Tremolo Speed and Depth controls, a Tone Cut control (to add further control over the higher- frequencies), a Master Volume, and a Standby and Power Switch. A true bypass effects loop, extension cab output and external cab output were also included; as well as an input for the external foot switch (to control Reverb and Tremolo). The amps are produced in China.

When he was exploring the outskirts of the city, he stumbled upon a giant abandoned robot partially overgrown with plants but still accessible. Once inside, his curiosity got the better of him and he pulls an old power switch among a series of stasis tanks. In doing so, he awakened the five robotic monkeys that form the Super Robot Monkey Team Hyperforce. In the process Chiro also fused himself with the mysterious supernatural energy of the Power Primate, allowing him to transform into a stronger, braver fighter and the leader of the team.

Original AT cases (flat case style) have an integrated power switch that protruded from the power supply and sits flush with a hole in the AT chassis. It utilizes a paddle-style DPST switch and is similar to the PC and PC-XT style power supplies. Later AT (so-called "Baby AT") and LPX style computer cases have a power button that is directly connected to the system computer power supply (PSU). The general configuration is a double-pole latching mains voltage switch with the four pins connected to wires from a four-core cable.

Conflict over the show developed due to the dislike of rap music by another employee so in the fall of 1987, the show was moved to 11:30 p.m. to midnight, Monday through Friday. Given the demographic of the majority of The Power Switch listeners, who were mostly high school and college students, the popularity declined and the show was cancelled in early 1988. Success in the ratings does not always equal revenue success, so "Power 104" went dark on December 24, 1988, as then Program Director Ed Donohue pulled the plug on the transmitter.

The band notably attended a prank set at the opening of the Bloor-Danforth subway on February 26, 1966. During this time around 500 University of Toronto students fled into the station by jumping over the turnstiles, including LGMB members. 400 members boarded the subway train, while some of the remaining students pulled the emergency power switch which interfered with regular service for more than five hours. In the 1970s, at the beginning of University of Toronto Frosh Week each year, the LGMB met on the provincial lawn in front of the Ontario provincial legislature.

This accessory would connect up to four standard wired controllers to a wireless hub that would transmit button inputs to a receiver plugged into the console. The button layout on the controller is identical to a standard NES control pad. However the controller itself built thicker to fit in 4 AAA batteries. This accessory also has an adjustable turbo switch, to allow a user to hold down a button instead of pressing it multiple times, as well as a power switch, to allow the user to conserve battery life when not in use.

As was the convention of the day, most Nova models provided a front panel console to control and monitor CPU functions. Models prior to the Nova 3 all relied on a canonical front panel layout, as shown in the Nova 840 panel photo above. The layout contained a keyed power switch, two rows of address and data display lamps, a row of data entry switches, and a row of function switches that activated various CPU functions when pressed. The address lamps always displayed the current value of the program counter, in binary.

This drive has received a facelift from the previous generation, which now sports a glossy finish, and a tiny white LED power indicator, along with a push button power switch in the back. The biggest change is that this drive now includes both eSATA and USB in one device. This device is DirectTV, Dish Network, TiVo, Moxi, Pace, and Scientific Atlanta (Cisco) certified. Seagate has come out with their own DVR Expander drive called the Seagate GoFlex DVR which comes in a 1 TB and 2 TB capacity.

Bose held the Condra Chair of Excellence in Power Electronics at University of Tennessee, Knoxville. Bose organized its power electronics teaching and research program for 15 years. He is recognized as world-renowned authority and pioneer in power electronics for his many contributions that include high frequency link power conversion, advanced control techniques by microcomputers, fuzzy logic and neural networks, transistor ac power switch for matrix converters, adaptive hysteresis-band current control, etc. He also pioneered power electronics applications in environmental protection that help solving climate change problems.

The first reshuffle of the year happened following the 2017 South Korean presidential elections. Then-opposition leader Choi Jong-hyuk and then-ruling party leader Jung Kang-hyun swapped places on May 10, 2017 at Lee Sang-bok's request, making it the first power switch since the show's inception. According to National Assembly captain Yang Won-bo, Jung seemed bitter about giving up his position to Choi, who was the show's youngest member at the time. Another change in its set and graphics happened on November 6, 2017, which was used until May 15, 2020.

Data gathered by IMP spacecraft and satellites were used to support the Apollo program, enabling the first manned Moon landing with the Apollo 11 mission in 1969. The Cassini–Huygens to Saturn in 1997 had spacecraft power distribution accomplished 192 solid-state power switch (SSPS) devices, which also functioned as circuit breakers in the event of an overload condition. The switches were developed from a combination of two semiconductor devices with switching capabilities: the MOSFET and the ASIC (application-specific integrated circuit). This combination resulted in advanced power switches that had better performance characteristics than traditional mechanical switches.

For loads other than incandescent lamps, such as fluorescent lamps, high- intensity discharge lamps, and electrical home appliances, the triac-based electronic switching in the lamp module is unsuitable and an appliance module must be used instead. These modules switch the power using an impulse relay. In the U.S., these modules are generally rated to control loads up to 15 amperes (1800 watts at 120 V). Many device modules offer a feature called local control. If the module is switched off, operating the power switch on the lamp or appliance will cause the module to turn on.

As a result of the power switch, Jean temporarily displayed a shadow astral form with a Phoenix symbol over her right eye.Uncanny X-Men #381 Jean again began manifesting the Phoenix raptor, creating a rift between Jean and Scott relationship, and the entity even started to appear as another personality within Jean, even having a conversation with Prof. Xavier on its role in events to come. When the X-Man, Xorn revealed himself to be a traitor who claimed to be Magneto, he trapped Jean and Wolverine on Asteroid M which was drifting closer to the Sun.

Currents drawn by old CdS light meters are typically in the 10 μA to 200 μA range (e.g. Minolta SR-T equipment series). Various kinds of active voltage regulation circuits using SMD transistors or integrated circuits have been devised, however, they are often difficult to integrate into the cramped battery compartment space. Replacements must operate with minimal voltage drop on the already very low voltage produced by a single battery cell, and the lack of a power switch on many traditional light meters and cameras makes an ultra-low power (ULP) or extreme-low power (XLP) design necessary.

Other cards, such as CPU accelerators, Ethernet and video cards were also made available for the Color Classic's Processor Direct Slot. The Color Classic shipped with the Apple Keyboard known as an Apple Keyboard II (M0487) which featured a soft power switch on the keyboard itself. The mouse supplied was the Apple Mouse known as the Apple Desktop Bus Mouse II (M2706). A slightly updated model, the Color Classic II, featuring the Macintosh LC 550 logicboard with a 33 MHz processor, was released in Japan, Canada and some international markets in 1993, sometimes as the Performa 275.

The X68000 features two soft-eject 5.25in floppy drives, or in some of the compact models, two 3.5in floppy drives, and a very distinctive case design of two connected towers, divided by a retractable carrying handle. This system was also one of the first to feature a software-controlled power switch; pressing the switch would signal the system's software to save and shutdown, similar to the ATX design of modern PCs. The screen would fade to black and sound would fade to silence before the system turned off. The system's keyboard has a mouse port built into either side.

Conventionally this was done by cycling the drive through its load sequence, but users who got frustrated with the wait time (up to 5 minutes depending on the drive model) learned how to input from the front panel a drive "recalibrate" I/O code and single-step the CPU through it, an operation that took an experienced user only a few seconds. The power switch was a 3-way keyed switch with positions marked OFF, ON, and LOCK. In the OFF position all power was removed from the CPU. Turning the key to ON applied power to the CPU.

While they are boring through, the drill breaks down and Chef goes out and "sacrifices" himself to pull the emergency power switch. Cartman then uploads the Slayer song "Raining Blood" into the speakers (as Cartman reasons, "hippies can't stand death metal"). The plan works and the hippies disperse, saving South Park, while Stan sees Randy and they end up hugging each other, knowing that they are safe. Cartman then pulls out a knife and tells Kyle that he has plans for him; Kyle is then forced to watch Cartman having fun with his Tonka bulldozer in the school parking lot.

The promotional commercial video for the fragrance was directed by Randee St. Nichols and was teased on July 11, 2016. The full advertising campaign was released exclusively by Entertainment Tonight on July 13, 2016. It features Spears "seductively throwing a power switch," while "wearing a lacy overcoat" and later she reveals "a skimpy black monokini"\- complete with fishnet stockings and black stilettos - and "dance[s] seductively in an empty theater" to the sound of the song. Near the end of the commercial, Spears wears "a shimmering silver bodysuit," which was compared to the one she used during the "Toxic" music video.

On the day of the contest the piano had decided to quit. Paula was just about to give up when she thought maybe somehow they forgot to turn it on, remembered just in time that there was a power switch. "I reached over and switched it on and I had such an emotional start that it improved my "performance", I made it through and I won the most important award in my life." Another moment that Paula remembers happening in Brașov was on the day of the festivity, when everybody was full of excitement and pressure, she met a journalist who asked for an interview about the contest.

They differ from the ones delivered to SJ with that they can be driven in multiple and have round instead of square side windows. In the mid 1960s it was decided to modernize the Ma-series through rebuilding the drivers cabin and mounting new side windows, in addition to a number of technical improvements. After the Rc locomotives were delivered in a large numbers to SJ in the early 1970s, the Ma series was restricted to freight only duties. This was despite being modernized at NOHAB in Trollhättan with changes to the bogies, main power switch, front lights and moving the cabin door to the centre to reduce noise.

Successful events and projects include the May 2009 2nd Annual E-Recycling Day, resulting in 155 tons of electronic items collected, and the Tiger Initiative for Gardening in Urban Settings (TIGUrS), a fruit and vegetable gardening initiative across campus. In April 2008, the student-run Environmental Action Club ran a Green Power Campaign to promote a student referendum to add a "Green Fee" to tuition payments to fund clean, renewable energy and other campus sustainability projects. The referendum passed with a 69% student approval rate. The university is now purchasing renewable energy through the TVA's Green Power Switch program and offsetting 10% of current energy use.

The redesign also features support for CEC (more commonly referred to by its manufacturer brandings of BraviaSync, VIERA Link, EasyLink and others) which allows control of the console over HDMI by using the remote control as the controller. The PS3 slim also runs quieter and is cooler than previous models due to its 45 nm Cell. The PS3 Slim no longer has the "main power" switch (similar to PlayStation 2 slim), like the previous PS3 models, which was located at the back of the console. It was officially released on September 1, 2009 in North America and Europe and on September 3, 2009 in Japan, Australia and New Zealand.

Many but not all vandal-resistant switches are momentary types; that is to say they only open or close a circuit while being depressed and revert to their inactive state when the button is released. Piezoelectric vandal-resistant switches usually fall into this category, but generally provide a pulse signal rather than staying continuously activated during the time pressure is applied, unlike their mechanical contact-based counterparts. Latching (push-on/push-off)-type vandal-resistant switches with mechanical contacts are also available, and are often used as the power switch for equipment that is used very frequently or which may be subjected to abuse.

To reach that backup power switch, the flight engineer would have had to rotate his seat, release his safety belt, and stand up. Since the aircraft did not get any higher than 350 ft (110 m) above the ground and was only in the air for 50 seconds between the time the engine separated and the moment it crashed, the time was not sufficient to perform such an action. In any event, the first officer was flying the airplane and his instruments continued to function normally. The aircraft climbed to about above ground level while spewing a white mist trail of fuel and hydraulic fluid from the left wing.

Atmospheric charges can cause undesirable, dangerous, and potentially lethal charge potential buildup in suspended electric wire power distribution systems. Bare wires suspended in the air spanning many kilometers and isolated from the ground can collect very large stored charges at high voltage, even when there is no thunderstorm or lightning occurring. This charge will seek to discharge itself through the path of least insulation, which can occur when a person reaches out to activate a power switch or to use an electric device. To dissipate atmospheric charge buildup, one side of the electrical distribution system is connected to the earth at many points throughout the distribution system, as often as on every support pole.

Two- hundred of the plugs were installed around Rand, and the terminal chassis was designed to be narrow enough to fit through doors while still leaving room for a coffee on one side. Toggling the power switch on the terminal caused it to connect at the new location. The custom terminals had been designed for JOSS as the engineers felt that the Model 33's "telecommunications functions are a mystery to the untrained person" and would be too confusing for the occasional users to bother learning. In practice, the Selectric-based mechanisms proved too fragile for the constant use they saw and were frequently being repaired in the field by IBM servicemen.

An opto-isolator contains a source (emitter) of light, almost always a near infrared light-emitting diode (LED), that converts electrical input signal into light, a closed optical channel (also called dielectrical channel), and a photosensor, which detects incoming light and either generates electric energy directly, or modulates electric current flowing from an external power supply. The sensor can be a photoresistor, a photodiode, a phototransistor, a silicon-controlled rectifier (SCR) or a triac. Since LEDs can sense light in addition to emitting it, construction of symmetrical, bidirectional opto-isolators is possible. An optocoupled solid-state relay contains a photodiode opto-isolator which drives a power switch, usually a complementary pair of MOSFETs.

The motherboard itself is designed to be placed in an empty C64 or C64C case already owned by the user. Produced in limited quantities, models of this Commodore 64 "clone" sport either machined or ZIF sockets in which the custom C64 chips would be placed. The board also contains jumpers to accept different revisions of the VIC-II and SID chips, as well as the ability to jumper between the analogue video system modes PAL and NTSC. The motherboard contains several innovations, including selection via the RESTORE key of multiple KERNAL and character ROMs, built-in reset toggle on the power switch, and an S-video socket to replace the original TV modulator.

The AppleCD SC Plus was Apple Computer's second CD-ROM drive, a replacement for the AppleCD SC which was introduced in 1991. It had the model number M3021, and it had just like its predecessor, the AppleCD SC and it had a 1x Read Only Media CD-ROM. The Plus could read a CD with up to 750 MB of data over the 650 MB of the AppleCD SC. It had indicator lights, an eject button, mini-phone audio jack, volume knob, and the CD caddy drive on the front of the accessory. On the back there were two 50-pin Centronics SCSI connectors, audio RCA connectors, power input, and a power switch.

TurboGrafx-16 games use the HuCard ROM cartridge format, thin credit card- sized cards that insert into the front slot of the console. PC Engine HuCards feature 38 connector pins, while TurboGrafx-16 HuCards (alternatively referred to as "TurboChips") feature eight of these pins in reverse order as a region lockout method. The power switch on the console also acts as a lock that prevents HuCards from being removed while the system is powered on. The European release of the TurboGrafx-16 did not have its own PAL-formatted HuCards as a result of its limited release, with the system instead supporting standard HuCards and outputting a PAL 50 Hz video signal.

The number-one electrical bus, whose generator was attached to the number-one engine, failed, as well, causing several electrical systems to go offline, most notably the captain's instruments, his stick shaker, and the slat disagreement sensors. A switch in the overhead panel would have allowed the captain to restore power to his instruments, but it was not used. The flight engineer may have been able to reach the backup power switch (as part of an abnormal situation checklist—not as part of their take-off emergency procedure) in an effort to restore electrical power to the number-one electrical bus. That would have worked only if electrical faults were no longer present in the number-one electrical system.

Thus, a 60% duty cycle means the signal is on 60% of the time but off 40% of the time. The "on time" for a 60% duty cycle could be a fraction of a second, a day, or even a week, depending on the length of the period. Duty cycles can be used to describe the percent time of an active signal in an electrical device such as the power switch in a switching power supply or the firing of action potentials by a living system such as a neuron. The duty factor for periodic signal expresses the same notion, but is usually scaled to a maximum of one rather than 100%.

This allowed the mirror to fully raise and then hold, allowing then the shutter release cycle still be separately at the ready. Unfortunately, this also activated the main power switch that was mechanically tied to the mirrors' main gear action and until the depressing of the shutter release to completes the exposure, the power to the circuits remain on and would drain the battery over time. Even with this one negative aspect to the mirror lock-up modification, it would still become a standard feature in later productions. The introduction of the mirror lock-up (MLU) feature appeared at about the same time as other critical changes, as with the counter components and other key components in the advance mechanism.

An additional wire referred to as 'Power Good' is used to prevent digital circuitry operation during the initial milliseconds of power supply turn-on, where output voltages and currents are rising but not yet sufficient or stable for proper device operation. Once the output power is ready to use, the Power Good signal tells the digital circuitry that it can begin to operate. Original IBM power supplies for the PC (model 5150), XT and AT included a line-voltage power switch that extended through the side of the computer case. In a common variant found in tower cases, the line-voltage switch was connected to the power supply with a short cable, allowing it to be mounted apart from the power supply.

Where a 3.5 mm or 2.5 mm jack is used as a DC power inlet connector, a switch contact may be used to disconnect an internal battery whenever an external power supply is connected, to prevent incorrect recharging of the battery. A standard stereo jack is used on most battery-powered guitar effects pedals to eliminate the need for a separate power switch. In this configuration, the internal battery has its negative terminal wired to the sleeve contact of the jack. When the user plugs in a two-conductor (mono) guitar or microphone lead, the resulting short circuit between sleeve and ring connects an internal battery to the unit's circuitry, ensuring that it powers up or down automatically whenever a signal lead is inserted or removed.

Technical sources describe two contrasting forms of reboot known as a cold reboot (also a cold boot, hard reboot or hard boot) and warm reboot (also soft reboot, or soft boot), although the definition of these forms can vary slightly between sources. According to Jones, Landes, and Tittel (2002), Cooper (2002), Tulloch (2002) and Soper (2004), on IBM PC compatible platform, a cold boot is a boot process in which the computer starts from a powerless state. All except Tulloch (2002) also mention that in cold boot, the system performs a power-on self-test (POST). In addition to the power switch, Cooper (2002) and Soper (2004) also state that the reset button, if present, may commence a cold reboot.

Chromeboxes, like other Chrome OS devices including Chromebook laptops, primarily support web applications, thereby relying heavily on an Internet connection for both software functionality and data storage. That connection, via a local area network, can be wireless or through an Ethernet port. The machines are classed as small form-factor PCs and typically feature a power switch and a set of connections to support a keyboard, pointing device and one or more monitors. Solid state drives are used for storage and only wireless printers are supported. The first Chromebox, released by Samsung on May 29, 2012, ran a dual-core Intel Celeron Processor 867 at 1.3 GHz, and featured six USB 2.0 ports and two DisplayPort++ slots compatible with HDMI, DVI, and VGA.

NBC's preparations for the November 17 game at Oakland were routine. The game was to be televised to most of the country beginning at 4 p.m. EST, with Curt Gowdy and Al DeRogatis announcing. NBC hoped that viewers who tuned their television channel selectors to the game would not walk over to the television and change the channel or turn off the power switch, but would watch the evening's programming. They anticipated a good game, which would cause the audience to remain in their seats and watch the game in its entirety, "a perfect lead in for the network's special presentation of Heidi, the Johanna Spyri children's classic, which was scheduled to air after the game at 7 p.m. (EST)".

Krackus planned on hailing Vexus immediately to summon an invasion, but his communicator fell apart as he tried to call her. Jenny managed to gather up all her pieces before Krackus fixed his communicator except a critical part that held her together, but she and her friends manage to fool Vexus and Krackus with some clever thinking, and the queen angrily pulled the inventor back to Cluster Prime before either could become the wiser. In "Toying with Jenny", he teamed up with Vexus and disguised themselves as G. Petto in order to trick Jenny into making toy versions of her, which were evil toys to destroy her. However, Brad and Tuck find the master power switch and shut the toys down.

This was used to reset the shutter mechanism in the event of mirror lock-up when the batteries were drained. OM-2n MD The OM-2n MD, manufactured from 1979 to 1984, has a lower-case "n" engraved next to the model number on the front plate at the rewind lever and on the top plate, to the left of the prism. Additionally, the re-set function was moved to the top of the camera via the power-switch and the word "Reset" is engraved next to the word "Check" on the top plate of the camera. The "n" model had a new, re-contoured advance lever which had smoother, rounded edges as opposed to the OM-2 and OM-2MD's advance lever's slimmer and sharper edges.

When replacing the battery cell, the system time and CMOS BIOS settings may revert to default values. Unwanted BIOS reset may be avoided by replacing the battery cell with the PSU power switch turned on and plugged into an electric wall socket. On ATX motherboards, the PSU will supply 5V standby power to the motherboard to keep CMOS memory energized while the system is off. Some computer designs have used non-button cell batteries, such as the cylindrical "1/2 AA" used in the Power Mac G4 as well as some older IBM PC compatibles, or a 3-cell NiCd CMOS battery that looks like a "barrel" (common in Amiga and older IBM PC compatibles), which serves the same purpose.

This version is very similar in cosmetics with the previous one but it introduces, for the first time, a full tube tremolo in a modern twin amp. The front panel contains (left to right): a single input, clean channel controls (volume, bright switch, treble, middle, bass), distorted channel controls (volume, treble, middle, bass, master volume, channel select), and shared controls (reverb, tremolo speed and intensity, presence). The rear panel contains power and stand by switches, output power switch (100W or 25W), effect send level, effect loop switch, return level, preamp out, power amp in, footswitch jack, tube bias adjustment and balancing, external speaker jack, main speaker jack. The footswitch has four buttons that allow to select the channel, bypass or engage the effect loop, switch the tremolo on/off, switch the reverb on/off.

The bottom half contains the battery compartment for four AA batteries, and speaker. The front of the console contains a power switch, two player controllers, which are D-pads with eight directions, and six buttons, R (reset), M (mute) which turns the sound on or off from the internal speaker, P (pause) to pause the game, and three action buttons A, B and C. On the back there is a contrast dial for the LCD. The game cartridges contain the main processor and ram, similar to the Microvision, as well as the monochrome 32x16 LCD with a color overlay with fixed sprites for the game graphics. They clip on the back of the display, and connect via 36 pins, with two 18-pin connectors on each side, and are necessary for turning on the console.

A close up of the VideoSport MK2 showing the knob used to choose between the console's three games The console has a central body with only a power switch and a knob to select one of three games: Football, Tennis/Pong and Hole-in-the-wall. There are two controllers with cables that connect to the console, with two paddles each (for vertical and horizontal movement) and a button (for serving and goal kicking). There were two variations of the console, the original VideoSport MK2 with gold letters and a later VideoSport MK2 without gold letters, likely introduced in an attempt to reduce production costs. The VideoSport MK2 was mostly assembled by hand, and the colour of the push buttons depended on what parts had been purchased "on the fly".

A multiple exposure picture (one of 68 images created by Century Magazine photographer Dickenson Alley) of Tesla sitting in his Colorado Springs laboratory with his "magnifying transmitter" generating millions of volts. The long arcs were not part of the normal operation, but only produced for effect by rapidly cycling the power switch. In May 1899, Tesla, several of his assistants, and a local contractor commenced the construction of Tesla's laboratory shortly after arriving in Colorado Springs, a high-altitude location where he would have more room than in his downtown New York City laboratory for his high-voltage, high-frequency experiments. Tesla moved there to study the conductive nature of low pressure air,Robert Uth, Tesla, Master of Lightning, Barnes & Noble Publishing - 1999, page 92PBS, Tesla - Life and Legacy - Colorado SpringsW.

Released in 1997, has a silver finish like the MK2 (beside silver finish, there are copies with "champagneish" color), a detached dust cover (no hinges), a recessed power switch to prevent DJs from accidentally turning the deck off during use, and no self-locking detent ("click") at the zero point of the pitch adjustment slider, allowing more precise control of pitch near that point. It has a reset button that sets the pitch adjustment to 0, regardless of the actual position of the pitch adjustment slider. In addition the M3D series has unique details: the brand and model label is printed in a single line instead of two; and the stroboscopic light is red with a slightly orange tone. This model also introduced a slot near the counterweight allowing for storage of a second headshell.

The entire system generates an official output of . This total figure does not combine the V8 engine and the electric motor standalone power figures. The powertrain uses a two-stage L110F continuously variable transmission, featuring a three-mode power switch for control of torque output between hybrid (normal), power, or snow modes; an additional EV mode allows for silent driving under full electric power. alt=Side view of a cutaway car chassis. According to tests by the Environmental Protection Agency (EPA) and on the European combined cycle, fuel economy is slightly higher overall than the lower-powered non-hybrid LS; Comparison data: LS 600h L 20/22/21; LS 460 L 16/24/19 (EPA 2008 MY)Comparison data: LS 600h: ; LS 460: ; Automobil Revue, catalogue edition 2007, p. 296.

Batman revels in his new powers and uses them to bring complete fear and order to Gotham's criminal underworld and eventually sets his sight on the rest of the world. Superman meanwhile, tries to lead a normal life as a husband and journalist. Their allies realized that the power switch has a psychological side effect to both men, as Batman's behavior becomes increasingly aggressive and Superman himself becomes emotionally depressed despite living the life he has always wanted, realizing that the transfer was the result of a curse that would give each man what they had always wanted, while simultaneously rendering them incapable of using it properly. With the aid of the Justice League, The Man of Steel was able to bring himself and the Dark Knight back to normal.

The "S-6," the most popular model, added the ability to add Percussion to the Solo division, thereby allowing the instrument to imitate instruments such as Banjo, Hawaiian Guitar, etc. The "S-100," the last revision of the "S" series, added built-in Stereo Reverberation, substituted an Expression Pedal for the expression lever used on previous models, and featured a re-styled cabinet design as well as a separate ON/OFF Power Switch (on previous models, power was turned on by swinging the expression lever down similar to the Solovox). An additional Chord Organ was manufactured for a brief time in the mid-'60s (the 2000 series), which had a simplified chord panel (Major, Minor, 7th and Diminished chords only) and traditional organ-type voices for the right-hand keyboard. This model also used solid-state circuitry.

They are shaped differently than original Game Boy Game Paks. Notably, these cartridges lack a notch that prevented the original Game Paks from being removed while the original Game Boy was powered on due to a plastic piece attached to the power switch, which would slide over the notch, locking a cartridge inside the system during gameplay (although some special cartridges like Kirby Tilt 'n' Tumble do include this notch). The lack of this notch keeps original Game Boy systems loaded with Game Boy Color cartridges from powering on. Similarly, Game Boy Pocket, Super Game Boy, Super Game Boy 2, and Game Boy Light will power on when loaded with a Game Boy Color cartridge, but will refuse to load the game and will display a warning message stating that a Game Boy Color system is required.

The Hadharem have a long seafaring and trading tradition that predates Semitic cultures, the Semitic Hadramites diaspora was historically the Mofarite & Gurage mercantile Semitic pioneers in East Africa, Hadramite influence was later over shadowed by the rise of the temple of the Moon governing Sabaean Semites that saw the concentration of power switch to a governing ruling class. With Governing pressure in the South Semitic regions Hadhrami seamen navigated in large numbers all around the Indian Ocean basin, from the Horn of Africa to the Swahili Coast to the Malabar Coast and Hyderabad in South India, Sri Lanka to Maritime Southeast Asia. They were involved in many places as organizers of the Haj. There are Hadharem communities in western Yemen and in the trading ports of the Arab States of the Persian Gulf and the Red Sea.

Once it has finished, the power light turns and remains green until the amplifier is turned off. The AU-11000 also has its own block diagram printed on the upper-front casing. Sansui designed the AU-11000 with the input, output and speaker terminals on the sides of the unit. The rear of the unit has the power cord and outlets only. The AU-11000 has features such as a logarithmic volume control, a 3-position level-set muting, a -20db mute switch, 3-position high & low filters, 3-Band Linear Bass/Midrange/Treble controls, 3 optional frequency settings for Bass & Treble controls, 3-position Tone Selection, A & B Speakers, Tape Input/Output control, 5-position mono-stereo selector switch, Tuner input, 2 Auxiliary inputs, 2 phono inputs, 2 rear 'always on' power outlets and 1 switched power outlet that is controlled by the units main power switch.

In 2004, Vox introduced a new series of amplifier called the AC30 Custom Classic. It claims to combine attributes of the original AC30 with what Vox sales literature refers to as a "boutique" of features. Specifications of the AC30CC series are two Inputs (Top Boost and Normal), an Input Link Switch for blending channels, a Normal Volume knob, a Brilliance Switch, a Top Boost Volume knob, a Treble knob, an EQ Standard/Custom Switch, Bass and Reverb Controls (Tone, Mix, and a Dwell Switch), Tremolo Speed & Depth knobs, a Tone Cut knob, a Master Volume knob, a Standby and a Power Switch, switchable cathode bias (Output Bias switch: "50 Hot": 33W at full power, "82 Warm": 22W at low power), switchable filter values (vintage/modern), and a true bypass effects loop. Newer AC30CC (or "Custom Classic") reissues (CC1, CC2X CCH head) are produced in China.

The PS3 slim also includes support for CEC (more commonly referred to by its manufacturer brandings of BraviaSync, VIERA Link, EasyLink etc.) which allows control of the console over HDMI by using the TV's remote control. The PS3 Slim no longer has the "main power" switch like the previous PS3 models, similar to redesigned slimline PlayStation 2. Support for emulation to play PS2 titles is not present in the Slim version, however shortly after the release of the PS3 slim, Sony announced a new series of PS2 remasters called Classics HD as in PS2 and PSP titles remastered in HD for the PS3 with Trophies and sometimes PlayStation Move compatibility added. As of October 2011, PS2 classics are available for purchase in the PlayStation Store. The PS3 slim was officially released on September 1, 2009, in North America and Europe and on September 3, 2009, in Japan, Australia and New Zealand.

The old RB303 tonearm has been replaced by a new RB330 version of the classic, with patent pending "zero-tolerance" bearings, stiffer vertical bearing housing, redesigned bias (anti-skate) housing, improved three-point plinth mounting, a new arm tube coating, and new arm wiring. The 24V AC synchronous motor has a new control PCB and housing cover for greater consistency during assembly and improved reliability, and the power switch has been relocated under the plinth for better ergonomics. New feet are said to lower noise transfer into the turntable, via a new stiffer, wider, hollow cone design constructed from Santoprene rubber. As always, the Planar 3 is still produced in Rega's UK manufacturing plant located in Southend-on-Sea, Essex UK. Remarkably, the 2016 Planar 3 only rose in price nominally from its predecessor, revealing the benefits of Rega's increased manufacturing capacity and popularity.

In the rear of the machine the most obvious change was a three-prong AC plug connector and power switch where the voltage converter had once been, an Apple security port at the far left corner, and the standardization of the serial port connectors (changed from DIN-5 to mini DIN-8, but still providing an identical signal). All the same built-in Apple II peripheral equivalents and port functionality of the IIc remained, with the one exception being the floppy port. Whereas the previous IIc could only support one external 5.25-inch floppy drive and (in later models) "intelligent" storage devices such as the UniDisk 3.5, the Apple IIc Plus offered backwards port compatibility and more. Support for the external Apple 3.5 Drive used by the Apple IIGS and Macintosh was now present, and up to two external 5.25-inch floppy drives could be added as well.

The back of the keyboard includes a groove in which the mouse can be clipped on for storage. The console unit consists of a single IR receiver, a power switch on the front, a cartridge slot and grooves to hold six other cartridges on the top, a power in socket (for use with a 5v DC adapter which is sold separately, although other compatible 5v DC adapters can be used at the expense of the warranty of the console) and a lead with an RCA-style video out and monaural audio out jack around the back, and a port on the left side of the console. The port is a mini 6-DIN connector and its purpose and use is unknown as it is neither mentioned nor explained in the manual. Additionally, two of the pins are blocked, making it impossible to connect standard PS/2 devices to the console.

Jean was added to the Gold Team beginning in Uncanny X-Men #281 (October, 1991). Following Cyclops's possession by the mutant villain Apocalypse and disappearance in the conclusion of the crossover storyline "Apocalypse: The Twelve", Jean lost her telekinetic abilities and was left with increased psychic powers, the result of the "six month gap" in plot across the X-Men franchise created by the Revolution revamp. During the Revolution event, all X-Men titles began six months after the events of Apocalypse: the Twelve, allowing writers to create fresh situations and stories and gradually fill in the missing events of the previous six months of continuity. Due to editing decisions following the success of the 2000 X-Men film, which depicted the character of Jean Grey with both telepathy and telekinesis, an explanation for Jean's altered powers in the comics was never explicitly made, though writer Chris Claremont revealed in interviews that it was intended to be an accidental power switch between fellow X-Man Psylocke, explaining Psylocke's new telekinetic powers as well.

After 1973, to streamline production, labour-intensive handwiring was discontinued and Marshall valve amplifiers were switched to printed-circuit-board (PCBs). Much of the debate about the difference in tone between the plexi- and aluminium- panel Marshall amps originates from 1974 when a number of circuit changes were made to the 1959 and 1987 amplifiers; with the addition of 'mkII' added to the 'Super Lead' name on the back panel and 'JMP' ("Jim Marshall Products") added to the left of the power switch on the front panel. Marshall's US distributor Unicord also had them change all the amps sold in the US and Japan to the much more rugged General Electric 6550 instead of the EL34 output tube. The combined effect of different tubes and a modified circuit gave these mid-1970s Marshalls a very bright and aggressive sound that was punchier than the EL34 sound, but not as rich, compressed, and had less poweramp distortion. In late 1975, Marshall introduced the "Master Volume" ("MV") series with the 100W 2203, followed in 1976 by the 50W 2204.

When power was applied and the front cover closed, a spindle engaged the center hole of the disc and a motor-driven idler wheel spun the disc on the spindle. The power switch itself was mechanically linked to the disc's drive system; lowering the front panel dropped the spindle and disconnected power to the instrument, allowing the program discs to be changed without the need to fully power down. A broad, flat, white plastic cleaning tool with a purple, simulated velvet cleaning surface was supplied with each Optigan to allow periodic cleaning of the photoelectric cell, located near the rear of the instrument. Thirty-seven tracks were sustained or repeatedly percussive notes in the timbre of a particular instrument and were played through a standard three-octave piano- style keyboard with the right hand; twenty-one were of a live band or soloist playing chords in different keys arranged per the circle of fifths, specifically B-flat, F, C, G, D, A and E major, minor, and diminished and were played with the left hand in much the style of a chord organ or accordion.