Traditional fuels that are cast are hydroxyl-terminated polybutadiene (HTPB) and paraffin waxes.
|
|
Sulphur emissions are virtually eliminated with renewable firelogs as they do not contain paraffin waxes.
|
|
Although many natural waxes contain esters, paraffin waxes are hydrocarbons, mixtures of alkanes usually in a homologous series of chain lengths. These materials represent a significant fraction of petroleum. They are refined by vacuum distillation. Paraffin waxes are mixtures of saturated n- and iso- alkanes, naphthenes, and alkyl- and naphthene-substituted aromatic compounds.
|
|
These include ammonia, morpholine and various ethoxylated surfactants such as polysorbate 80. The waxes are often some mixture of carnauba wax, beeswax, montan wax and its oxidized derivatives, and paraffin waxes.
|
|
Calumet Specialty Products Partners, L.P. is a public U.S.-based company, incorporated in 1916, which specializes in the manufacturing of naphthenic and paraffinic oils as well as aliphatic solvents and paraffin waxes. They own several manufacturing plants in Princeton, Cotton Valley, and Shreveport, Louisiana, as well as in Burnham, Illinois, Dickinson, Texas, Karns City, Pennsylvania, and Superior, Wisconsin.
|
|
Icosane (alternative spelling eicosane) is an alkane with the chemical formula C20H42. It has 366,319 constitutional isomers. Icosane has little use in the petrochemical industry, as its high flash point makes it an inefficient fuel. n-Icosane (the straight-chain structural isomer of icosane) is the shortest compound found in paraffin waxes used to form candles.
|
|
A typical alkane paraffin wax chemical composition comprises hydrocarbons with the general formula CnH2n+2, such as hentriacontane, C31H64. The degree of branching has an important influence on the properties. Microcrystalline wax is a lesser produced petroleum based wax that contains higher percentage of isoparaffinic (branched) hydrocarbons and naphthenic hydrocarbons. Millions of tons of paraffin waxes are produced annually.
|
|
The Paraffin wax was processed by distilling residue left after crude petroleum was refined. Paraffin could be used to make inexpensive candles of high quality. It was a bluish-white wax, burned cleanly, and left no unpleasant odor, unlike tallow candles. A drawback to the substance was that early coal- and petroleum- derived paraffin waxes had a very low melting point.
|
|
Oil based defoamers have an oil carrier. The oil might be mineral oil, vegetable oil, white oil or any other oil that is insoluble in the foaming medium, except silicone oil. An oil based defoamer also contains a wax and/or hydrophobic silica to boost the performance. Typical waxes are ethylene bis stearamide (EBS), paraffin waxes, ester waxes and fatty alcohol waxes.
|
|
It is generally darker, more viscous, denser, tackier and more elastic than paraffin waxes, and has a higher molecular weight and melting point. The elastic and adhesive characteristics of microcrystalline waxes are related to the non-straight chain components which they contain. Typical microcrystalline wax crystal structure is small and thin, making them more flexible than paraffin wax. It is commonly used in cosmetic formulations.
|
|
A wax motor is a linear actuator device that converts thermal energy into mechanical energy by exploiting the phase-change behaviour of waxes. During melting, wax typically expands in volume by 5% to 20% . A wide range of waxes can be used in wax motors, ranging from highly refined hydrocarbons to waxes extracted from vegetable matter. Specific examples include paraffin waxes in the straight-chain n-alkanes series.
|
|
Harder waxes address colder, drier or more abrasive snow conditions, whereas softer waxes have a lower coefficient of friction, but abrade more readily. Wax formulations combine three types of wax to adjust coefficient of friction and durability. From hard to soft, they include synthetic waxes with 50 or more carbon atoms, microcrystalline waxes with 25 to 50 carbon atoms and paraffin waxes with 20 to 35 carbon atoms. Additives to such waxes include graphite, teflon, silicon, fluorocarbons, and molybdenum to improve glide and/or reduce dirt accumulation.
|
|
In the modern English-speaking world, the term crayon is commonly associated with the standard wax crayon, such as those widely available for use by children. Such crayons are usually approximately in length and made mostly of paraffin wax. Paraffin wax is heated and cooled to achieve the correct temperature at which a usable wax substance can be dyed and then manufactured and shipped for use around the world. Paraffin waxes are used for cosmetics, candles, for the preparation of printing ink, fruit preserving, in the pharmaceutical industry, for lubricating purposes, and crayons.
|
|
With Doom Mons, Sotra Patera is regarded as "the very best evidence, by far, for volcanic topography anywhere documented on an icy satellite", according to planetary scientist Jeffrey Kargel of the University of Arizona. It has been compared with terrestrial volcanoes such as Etna, Laki and volcanic cones near Flagstaff, Arizona. There is as yet no evidence of current activity, but researchers plan to monitor the area for changes. It is unclear what might have been erupted from Sotra Patera—possibly water mixed with ammonium, or more exotic hydrocarbon compounds such as polyethylene, paraffin waxes or asphalt.
|
|
Flavedo is mostly composed of cellulosic material but also contains other components, such as essential oils, paraffin waxes, steroids and triterpenoids, fatty acids, pigments (carotenoids, chlorophylls, flavonoids), bitter principles (limonin), and enzymes. In citrus fruits, the flavedo constitutes the peripheral surface of the pericarp. It is composed of several cell layers that become progressively thicker in the internal part; the epidermic layer is covered with wax and contains few stomata, which in many cases are closed when the fruit is ripe. When ripe, the flavedo cells contain carotenoids (mostly xanthophyll) inside chromoplasts, which, in a previous developmental stage, contained chlorophyll.
|
|
Hydrogen fluoride (HF), like water, is a polar molecule, and due to its polarity it can dissolve many ionic compounds. Its melting point is −84 °C, and its boiling point is 19.54 °C (at atmospheric pressure); the difference between the two is a little more than 100 K. HF also makes hydrogen bonds with its neighbor molecules, as do water and ammonia. It has been considered as a possible solvent for life by scientists such as Peter Sneath cited in and Carl Sagan. HF is dangerous to the systems of molecules that Earth-life is made of, but certain other organic compounds, such as paraffin waxes, are stable with it.
|
|
In total, the capacity of the company for the production of finished products is more than 500,000 tons per year, meanwhile the quality of the products have been upgraded according to the appropriate advanced international standards and guidelines. It has a 40-43% share of the motor oil market and a 30% share of the industrial lubricant market in Iran. The company also exports about $40 million in finished lubricants, rubber process oils and paraffin waxes to more than 30 countries. Behran Oil Company has been progressively increased its commitment in the field of lubricant production technology through considerable investment in research and development.
|
|