It's fascinating to catalogue the pieces that outlive their immediate usefulness: vintage Levi's jeans; industrial light fixtures; old bicycles; Airstream trailers; flat-billed wool baseball caps; oilcans; porcelain advertising signs.
|
|
In addition, items like wedding dresses specific to Tekirdağ, censers, oilcans, dowry bundles, money bags etc. are on display. Another room is devoted to notable people, musicians and artists, who were born or worked in Tekirdağ. In the hall, oil paintings showing Namık Kemal, an old Tekirdağ mansion and a street in Uzunköprü are hanging on the walls.
|
|
By 1820, tin canisters or cans were being used for gunpowder, seeds, and turpentine. Early tin cans were sealed by soldering with a tin-lead alloy, which could lead to lead poisoning. In 1901 in the United States, the American Can Company was founded, at the time producing 90% of United States tin cans.American Can Company: Revolution in Containers , Excerpts of William C. Stolk; Address of The Newcomen Society of North America, April 21, 1960 – Printed July 1960, from oilcans.
|
|
Tallon and his team created hundreds of products, including industrial robots for Peugeot, the apparently purposeless 8mm film camera "Veronic", the Gallic 16 and 14 lathes for the Belgian company La Mondiale - a quantum leap in machine tooling -, airport vehicles, forklifts for Fenwick, graphic images for Fenwick Aviation, and a slide projector for Kodak. In the art world, Tallon worked with Yves Klein, César Baldaccini, Arman , and was contacted by Catherine Millet, founder of the review, to create a brand that has hardly changed to this day. Tallon became a household name in areas including tableware, furniture, interior design, reflector lamps for the German Erco, watches for Lip, ski boots for Salomon Group, toothbrushes for Fluocaril, oilcans for Elf, and so on.
|
|
The fact that steam engines > connecting rods attached to the pistons, located outside, rather than inside > as in modern engines, and they go into the cycle of the piston not > reciprocates only, that is up and down, but also too much sweeping to the > sides that you have look to avoid its "elbow" does not hurt you if you stand > close. The crank bearing is in the lower joint of the elbow and this bearing > needs to be lubricated constantly with the machine oil using the oilcans. It > is required the highest category skill as a funnel for the pouring was on > the rod, which is hopping a dance of death. And a oilcaner, so a motorman > was called in that years, was involved unwittingly into the rhythm of this > pagan dance, it was independs if he like it or not.
|
|