Sentences Generator
And
Your saved sentences

No sentences have been saved yet

47 Sentences With "non automated"

How to use non automated in a sentence? Find typical usage patterns (collocations)/phrases/context for "non automated" and check conjugation/comparative form for "non automated". Mastering all the usages of "non automated" from sentence examples published by news publications.

This isn't the first time there have been reports of people treating autonomous cars worse than non-automated vehicles.
Meanwhile, the IRS has stopped several other functions: audits, return examinations, non-automated collections, and legal counsel, among other operations.
Meanwhile, the IRS will also stop several other functions: audits, return examinations, non-automated collections, and 1040X processing, among other operations.
But when we went off book and started asking non-automated questions, the system melted down thinking we were requesting a return.
Twitter does not seem to comprehend that non-automated content, including from American accounts, is a huge part of the disinformation ecosystem.
Amazon has a non-automated sliding feature on its homepage for items "Trending near you" that shoppers can toggle to the left or right.
While technology is used to recreate the animals used in the show, the circus has non-automated clowns, acrobats, magicians and other usual acts.
Twitter did not answer written questions sent by Reuters but referred to its user policy which prohibits spamming by both automated and non-automated accounts.
We've reached out to Pearson and asked for statistics on failure rates versus non-automated tests and we'll update this post when we receive a reply.
According to its own guidelines for operations under a shutdown, the IRS had classified processing refunds as non-essential work, along with "non-automated collections," auditing and other functions.
Perhaps most interesting is the revelation that bots aren't actually responsible for most of this stuff — the bulk of it appears to be non-automated, coordinated campaigns by human actors.
With unemployment in the east averaging 15%, another common fare class in Berlin is the S(ocial)-Class. These identification cards are cleared through the normal government offices, then fulfilled at a BVG ride-pass non-automated location. Provided either by the Job Center (Arbeitsamt) for out-of-work residents or by the Sozialamt for people who cannot work or are disabled, the S-Class ride-passes normally restrict travel to the AB zones and must be renewed (a new pass purchased at a non-automated location) on the 1st of each month. Additional passes are available for those which want to bring a bicycle on the public transit system.
This yielded some 4.1 million accounts. There were no remaining records for 2.8 million additional accounts. The account names were compared by computers with the names of Nazi victims drawn from lists held by Holocaust researchers. Secondly, a selective non-automated examination of account-by-account analysis of available documentation.
The term rice cooker formerly applied to non-automated dedicated rice-cooking utensils, which have an ancient history (a ceramic rice steamer dated to 1250 BC is on display in the British Museum). It now applies mostly to automated cookers. Electric rice cookers were developed in Japan, where they are known as suihanki (炊飯器).
A non-automated outgoing trunk test panel allows voltmeter, and signaling checks on trunks to distant offices, freeing the MTF from this tedious job. Each outgoing trunk is represented by two jacks: one for test access for the voltmeter and sender circuits, and one for the make-busy operation. The master test frame was able to override a made-busy status when necessary.
The family Helodermatidae (beaded lizards) has only one genus with 5 species, including the Gila monster. This family is the only known family of lizards that have well-developed venom glands. In addition, they have short, non-automated tails. They have somewhat tubercular scales both dorsally and laterally, with their ventral scales being smooth, and being larger than the dorsal and lateral scales.
The Russian high temperature record dating back to 1940 was beaten on 12 July, when Utta in the Kalmykian Republic, registered . The highest temperature at a non-automated station was in Yashkul, Kalmykia, also beating the previous record. The record for Asian Russia was also beaten: was recorded in Ust-Karsk on 27 June, beating the record of set in Belogorsk, Amur Oblast, two days earlier.
Before the Information Age in the late 20th century, businesses sometimes laboriously collected data from non-automated sources. As they lacked computing resources to analyze the data properly, they often made commercial decisions primarily by intuition. As businesses started automating their processes, the availability of data increased. However, collection often remained a challenge due to a lack of infrastructure for data exchange or incompatibilities between systems.
Biometric devices have been used by man over a long period of time. Non-automated biometric devices have used us since 500 BC as it was seen that Babylonian business transactions were recorded on clay tablets that included fingerprints. Automation in Biometric devices was first seen in the 1960s. The Federal Bureau of Investigation (FBI) in the 1960s, introduced the Indentimat, which started checking for fingerprints to maintain criminal records.
The fields of interest of the Society are the theoretical, experimental and operational aspects of electrical and electronics engineering in mobile radio, motor vehicles and land transportation. (a) Mobile radio shall include all terrestrial mobile services. (b) Motor vehicles shall include the components and systems and motive power for propulsion and auxiliary functions. (c) Land transportation shall include the components and systems used in both automated and non- automated facets of ground transport technology.
The number of human bank tellers in the United States increased from approximately 300,000 in 1970 to approximately 600,000 in 2010. Counter-intuitively, a contributing factor may be the introduction of automated teller machines. ATMs let a branch operate with fewer tellers, making it cheaper for banks to open more branches. This likely resulted in more tellers being hired to handle non-automated tasks, but further automation and online banking may reverse this increase.
The number of tellers in the United States increased from approximately 300,000 in 1970 to approximately 600,000 in 2010. Counter-intuitively, a contributing factor may be the introduction of automated teller machines. ATMs let a branch operate with fewer tellers, making it cheaper for banks to open more branches. This likely resulted in more tellers being hired to handle non-automated tasks, but further automation and online banking may reverse this increase.
A major relay center in the mid 1900s might have dozens of inbound and outbound teleprinters, scores of operators, and thousands of messages in the queues during peak periods. Operators referred to these centers as "torn-tape relay centers," a reference to removing the received message from the inbound teleprinter by tearing the paper tape to separate one message from the next. The U.S. military term for such a center was "Non-Automated Relay Center" (NARC).
Bitflu has received good reviews, both in open-source software sites and blogs, praising it for being lightweight and feature-complete. Even so, Bitflu seems to be largely unknown, reportedly commanding only 0.000025% of the total BitTorrent traffic. According to one reviewer, this could be due to its non-automated, relatively elaborated install procedure, which could be putting off a "majority of users who can't do anything more complicated than a click-next-until-finish install".
The advent of electrification, and automatic lamp changers began to make lighthouse keepers obsolete. For many years, lighthouses still had keepers, partly because lighthouse-keepers could serve as a rescue service if necessary. Improvements in maritime navigation and safety such as satellite navigation systems such as GPS led to the phasing out of non-automated lighthouses across the world. In Canada, this trend has been stopped and there are still 50 staffed light stations, with 27 on the west coast alone.
The enforcement of the Act by the Information Commissioner's Office is supported by a data protection charge on UK data controllers under the Data Protection (Charges and Information) Regulations 2018. Exemptions from the charge were left broadly the same as for 1998 Act: largely some businesses and non-profits internal core purposes (staff or members, marketing and accounting), household affairs, some public purposes, and non-automated processing. Under the 2018 Act the enforcement regime for registration changed from criminal to civil monetary penalties.
Stage lighting accessories are components manufactured for conventional (non- automated) stage lighting instruments. Most conventional fixtures are designed to accept a number of different accessories designed to assist in the modification of the output. These accessories are intended to either provide relatively common functionality not originally provided in a fixture (such as beam shaping through barn doors), or to extend the versatility of a lighting instrument by introducing features. Other accessories have been designed to overcome limitations or difficulties some fixtures present in specific applications.
Two control groups were selected to monitor a specific task, with the first groups having access to reliable automation aid and the second group with no access to aid. The results showed that the second group in non-automated settings out-performed their counterpart. The first group made more errors when not explicitly prompted by automation, moreover, they followed the instruction of automation even when it contradicted their decision. This experiment shows the example of automation bias and participants high degree of obedience to automation.
The car bodies are made out of aluminium, and the trains are powered by three-phase-asynchronous motors. As they are used in automatic operation, the DT3 trains are not equipped with full driving cabs, but only with small concealed driving panels, which are used for maintenance. The DT3-F trains are equipped with full driving cabs, enabling them to be used on driver operated services on non-automated lines. The cabs are designed to be removed in case of a conversion for fully automated operation.
Articles 1 and 2 of the LFPDPPP point out that the objectives of it are ensuring the privacy of persons (natural) and their right to informational self-determination, and that its provisions apply to non-automated or automated processing of personal information perform (the "Responsible") individuals or companies, with certain exceptions (personal purposes and carrying on the credit information). In this chapter the central terms of this regulation, among which are fundamental concepts of sensitive personal data, head, head, manager, third and treatment are defined.
Contact shoes are fitted on each side of the outer bogies. As all contact shoes are electrically connected, one train can pass through dead sections of up to length without running out of power. The A2.3 series trains introduced a number of improvements, including a newly designed compressed air system and split-flap destination indicators, which were also retrofitted into units of older series, replacing the non-automated destination signs. The Class A trains are powered by resistor-controlled direct-current motors, which are capable of rheostatic braking.
CASP, which stands for Critical Assessment of Techniques for Protein Structure Prediction, is a community-wide experiment for protein structure prediction taking place every two years since 1994. CASP provides with an opportunity to assess the quality of available human, non- automated methodology (human category) and automatic servers for protein structure prediction (server category, introduced in the CASP7). The CAMEO3D Continuous Automated Model EvaluatiOn Server evaluates automated protein structure prediction servers on a weekly basis using blind predictions for newly release protein structures. CAMEO publishes the results on its website.
The outdated equipment was dismissed as a concern, with manager Bob Strong saying their loyal patrons "come for what's on the screen and not to hear a new sound system." Projectionist Bob Monshein fondly dubbed the non-automated 1939 projectors "Neandermation." During a 1983 appearance to benefit Madison Repertory Theatre, film critic Roger Ebert called the Majestic "a temple of art and sacred to me." As many of the older classic films became available on video cassette in the early 1980s, the theater switched to contemporary independent films and foreign fare.
The European Union defines that a rapid test means qualitative or semi-quantitative in vitro-diagnostic medical devices, used singly or in a small series, which involve non-automated procedures and have been designed to give a fast result.2009/886/EC: Commission Decision of 27 November 2009 amending Decision 2002/364/EC on common technical specifications for in vitro diagnostic medical devices Lateral flow tests are probably the most known type of rapid diagnostic tests, similar to pregnancy tests, but there exist other systems as dipsticks, vertical flow, etc. Anything that can be used at bedside (point-of- care) of the patient.
An automated Load Shedding Application detects predetermined trigger conditions in the distribution network and performs predefined sets of control actions, such as opening or closing non-critical feeders, reconfiguring downstream distribution or sources of injections, or performing a tap control at a transformer. When a distribution network is complex and covers a larger area, emergency actions taken downstream may reduce burden on upstream portions of the network. In a non-automated system, awareness and manual operator intervention play a key role in trouble mitigation. If the troubles are not addressed quickly enough, they can cascade exponentially and cause major catastrophic failure.
Berlin and the state of Brandenburg with VBB fare zones indicated Berlin public transit passes are available from many places, automated and non-automated, from BVG, Bahn, and authorized third-parties. The Ring-Bahn Line and the other S-Bahn lines are included, as are all U-Bahn lines, buses, trams, ferries, and most trains within the city limits: tickets are valid for all transportation considered part of the Berlin-Regional public transit system. Ride-passes (tickets) are available in fare classes: Adult and Reduced. Children between the ages of six and 14 and large dogs qualify for the reduced fare.
IDEF0 may be used to model a wide variety of automated and non-automated systems. For new systems, it may be used first to define the requirements and specify the functions, and then to design an implementation that meets the requirements and performs the functions. For existing systems, IDEF0 can be used to analyze the functions the system performs and to record the mechanisms (means) by which these are done. The result of applying IDEF0 to a system is a model that consists of a hierarchical series of diagrams, text, and glossary cross-referenced to each other.
The purpose of the test environment is to allow human testers to exercise new and changed code via either automated checks or non-automated techniques. After the developer accepts the new code and configurations through unit testing in the development environment, the items are moved to one or more test environments. Upon test failure, the test environment can remove the faulty code from the test platforms, contact the responsible developer, and provide detailed test and result logs. If all tests pass, the test environment or a continuous integration framework controlling the tests can automatically promote the code to the next deployment environment.
It was only proposing a specific NLP task, while the Naor test identifies and explores a large class of problems, not necessarily from the domain of NLP, that could be used for the same purpose in both automated and non-automated versions of the test. Finally, Human-based genetic algorithm (HBGA) encourages human participation in multiple different roles. Humans are not limited to the role of evaluator or some other predefined role, but can choose to perform a more diverse set of tasks. In particular, they can contribute their innovative solutions into the evolutionary process, make incremental changes to existing solutions, and perform intelligent recombination.
An irrigation line with water timer A water timer is an electromechanical device that, when placed on a water line, increases or decreases the water flow through the use of an electro-mechanically actuated ball valve or embedded (solenoid) valve. It is used in conjunction with irrigation sprinklers to form an automated or non-automated sprinkler system, capable of administering precise amounts of water, at a regular basis. A water flow timer using a ball valve contains an electric motor with gears to stop or start the water flow by turning a perforated ball within the water flow line. The gearbox in a ball valve timer makes a rumbling sound when actuated.
Southern Tech, in response to increasing demands, recently built a state-of-the-art Engineering Technology Building to house programs which directly address the employment needs of manufacturing- related companies. The 3D-CNC Machining program provides training designed to bring a student to an advanced level of understanding in the field of manufacturing processes currently used in both automated and non-automated industries. Mechatronics prepares students to become Automated Systems Technicians, covering robotics and fundamentals of electricity, electronics, programmable logic controllers, hydraulics, and pneumatics. Computer Aided Drafting, also located in the Engineering Technology building, has been producing graduates since 1968 and the need for skills in Computer Aided Design (CAD) is still on the rise today.
The government maintained that Merena was entitled to approximately $10 million of the $65 million attributable to the non-"automated chemistry" claims and has paid Merena this amount. The government and the Spear relators have a proposed agreement that, if approved, will award the Spear relators 15% of the $13 million that the government attributed to a claim called the "CBC Indices" claim. The government previously agreed to pay the whistle-blowers a minimum of $9.7 million but only if they dropped claims to a larger portion. But the judge's ruling adds an additional $42.3 million, meaning the men will share about 17 percent of the money the whistle-blowers helped bring in.
Under the 2018 Act, the register is called the Register of fee payers, and the purposes for processing are nor supplied, though other trading names and the name of a Data Protection Officer may be given. The enforcement of the Act by the Information Commissioner's Office is supported by a data protection charge on UK data controllers under the Data Protection (Charges and Information) Regulations 2018. Exemptions from the charge were left broadly the same as for 1998 Act: largely some businesses and non-profits internal core purposes (staff or members, marketing and accounting), household affairs, some public purposes, and non-automated processing. Under the 2018 Act the enforcement regime for registration changed from criminal to civil monetary penalties.
Section of a typical Australian late 1930s radio, showing the point to point construction between components. Point-to-point construction is a non- automated method of construction of electronics circuits widely used before the use of printed circuit boards (PCBs) and automated assembly gradually became widespread following their introduction in the 1950s. Circuits using thermionic valves (vacuum tubes) were relatively large, relatively simple (the number of large, hot, expensive devices which needed replacing was minimised), and used large sockets, all of which made the PCB less obviously advantageous than with later complex semiconductor circuits. Point-to-point construction is still widespread in power electronics where components are bulky and serviceability is a consideration, and to construct prototype equipment with few or heavy electronic components.
The Morgantown system, more correctly described as a Group Rapid Transit (GRT) type of Automated Guideway Transit system (AGT), has completed 110 million passenger-miles without serious injury. According to the U.S. Department of Transportation, AGT systems as a group have higher injury rates than any other form of rail-based transit (subway, metro, light rail, or commuter rail) though still much better than ordinary buses or cars. More recent research by the British company ULTra PRT reported that AGT systems have a better safety than more conventional, non- automated modes. As with many current transit systems, personal passenger safety concerns are likely to be addressed through CCTV monitoring, and communication with a central command center from which engineering or other assistance may be dispatched.
Mark von Rosing, et al. (Morgan Kaufmann, ) use the following definition: :: Business process management (BPM) is a discipline involving any combination of modeling, automation, execution, control, measurement and optimization of business activity flows, in support of enterprise goals, spanning systems, employees, customers and partners within and beyond the enterprise boundaries. The Association of Business Process Management Professionals defines BPM as: :: Business process management (BPM) is a disciplined approach to identify, design, execute, document, measure, monitor, and control both automated and non-automated business processes to achieve consistent, targeted results aligned with an organization’s strategic goals. BPM involves the deliberate, collaborative and increasingly technology-aided definition, improvement, innovation, and management of end-to-end business processes that drive business results, create value, and enable an organization to meet its business objectives with more agility.
Non-automated information exchanges, such as verbal orders, are captured in the OV products only. ; SV-7 Systems/Services Performance Parameters Matrix : Specifies the quantitative characteristics of systems and system hardware/software items, their interfaces (system data carried by the interface as well as communications link details that implement the interface), and their functions. It specifies the current performance parameters of each system, interface, or system function, and the expected or required performance parameters at specified times in the future. Performance parameters include all technical performance characteristics of systems for which requirements can be developed and specification defined. The complete set of performance parameters may not be known at the early stages of architecture definition, so it should be expected that this product will be updated throughout the system’s specification, design, development, testing, and possibly even its deployment and operations life-cycle phases.

No results under this filter, show 47 sentences.

Copyright © 2024 RandomSentenceGen.com All rights reserved.