Higher TDPs mean the CPU needs more cooling and power.
|
|
Also, there are zippered vents for when even more cooling is called for.
|
|
As Canada enters the rate hike cycle, we might see more cooling of property prices.
|
|
This finding could help us make silk even cooler, or engineer other fabrics to be more cooling as well.
|
|
This has led to more "cooling degree days," or days when average temperatures are warm enough to necessitate air-conditioning.
|
|
There need to be more cooling centers installed, and mass transit should be expanded so all the internal combustion engines stop heating the streets.
|
|
This, by the way, is the reason that gaming laptops look huge half of the time: they're enormous to accommodate more cooling hardware than anything else.
|
|
There will be higher power demand (in part for more cooling in a hotter world), combined with higher temperatures reducing the efficiency of power generation and delivery.
|
|
Those tweaks include a software update to improve the car's air suspension system performance under heavy load, and more cooling for the front motor, which ran hotter than expected.
|
|
For example, in 2010, they expected 8.0 more cooling-degree days than the annual average from 2002-18, almost the exact same figure as the 8.2 calculated by NASA.
|
|
And if you stress the Core i27 and the GeForce GTX 21080 at the same time, they seem to require more cooling and power than the XPS 216's unchanged design can offer.
|
|
Given more lead time, emergency planners could take measures like establishing more cooling centers at schools and other buildings, and stepping up programs to track homeless people and homebound, chronically ill older Americans.
|
|
With New York's summer weather already in full effect, the three cold Korean ramen dishes currently on her menu are sparing ramen aficionados from their usual sweat-dripping summertime sessions for a more cooling and refreshing dining experience.
|
|
While the company says its efforts will dissuade bot activities in the long run, it recognizes its efforts in the short term will result in cloud servers working overtime, thus consuming more electricity and requiring more cooling — all of which contribute to greater energy consumption.
|
|
Moreover, the team found that relatively well-understood processes on Earth such as the ice-albedo feedback—where planetary cooling leads to more ice coverage and thus more sunlight reflected from the planet that in turn leads to more cooling and more ice—wouldn't be likely to apply on Proxima b since its host star's emissions are more in the infrared spectrum than our Sun.
|
|
Inversely, cooler temperatures increase ice, which increases albedo, leading to more cooling.
|
|
After fermentation, one more cooling process takes place. After this cooling process, the sour cream is packaged into their final containers and sent to the market.
|
|
A convection industrial reflow oven. Example of reflow soldering thermal profile. The oven contains multiple zones, which can be individually controlled for temperature. Generally there are several heating zones followed by one or more cooling zones.
|
|
Belly-mounted cowl flaps are still used, but less cooling airflow is directed over the cylinder barrels and more cooling airflow is directed into side-mounted oil coolers. About one-third of the engine cooling is provided by airflow over the cylinders; the remainder is provided by engine oil.
|
|
The lower engine cowlings were omitted to allow for more cooling air flow over the engine. Second, the A-2 was more heavily armed than the O-2. The A-2 had six forward- firing .30-caliber Browning machine guns - two in the nose forward of the cockpit, and two each in the mid-upper and lower wings.
|
|
Columnar jointing in basalt, Marte Vallis In 2009, HiRISE discovered columnar jointing in rocks on Mars. Such jointing is accepted as having involved water. To make the parallel cracks of columnar jointing, more cooling is necessary, and water is the most logical choice. Scientists calculate that the water was present intermittently for a few months to a few years.
|
|
The engine mount location was updated for improved handling. A new instrument cluster appeared with the analogue fuel gauge moved to a central location from previously within the tachometer face, a row of indicator LEDs below the clocks, and a hazard light switch. Weight increased by . 1995: More cooling fins were added on the lower side portion of the cylinder bank.
|
|
Both land and open water are on average less reflective than ice and thus absorb more solar radiation. This causes more warming, which in turn causes more melting, and this cycle continues. During times of global cooling, additional ice increases the reflectivity which reduces the absorption of solar radiation which results in more cooling in a continuing cycle. Considered a faster feedback mechanism.
|
|
In areas with a hot climate, large office buildings, hospitals, and schools typically use one or more cooling towers as part of their air conditioning systems. Generally, industrial cooling towers are much larger than HVAC towers. HVAC use of a cooling tower pairs the cooling tower with a water-cooled chiller or water-cooled condenser. A ton of air-conditioning is defined as the removal of .
|
|
The plastic rear deck lid is topped by a wide carbon-fibre rear wing. The front airdam has been fitted with an aero splitter to improve front downforce and provide more cooling air through the radiator. The European version of the RS is fitted with lightweight plexiglass rear windows and a factory-installed roll cage. Production of the first generation 997 GT3 RS ended in 2009.
|
|
The explosion had lifted the 1,000-ton reactor lid. Lacking high-range dosimeters, officials had difficulty determining whether a radiation release had occurred or not and, if so, how much radiation had been released. Bryukhanov, assisted by manager Dyatlov and chief engineer Fomin, kept ordering the operators to add more cooling water. Based on faulty information from Dyatlov, Bryukhanov continued to deny that the reactor core had exploded.
|
|
These oxides are removed with the dross while cleaning the surface of the molten metal. Nowadays this "battle" has lost its importance, at least for Monotype. The quality of the produced type is far more important. Alloys with a high-content of antimony, and subsequently a high content of tin, can be cast at a higher temperature, and at a lower speed and with more cooling at a Monotype composition or supercaster.
|
|
Interior Rolls-Royce introduced the updated Series II Ghost at the 2014 Geneva Motor Show. Visual changes over the Series I Ghost include re-sculpted headlights, and unbroken daytime running lights. The Series II also gained a tapered ‘wake channel’ on the bonnet, emanating from the Spirit of Ecstasy’s wings. Chrome inserts were added to the front air intakes, which had been enlarged so as to feed more cooling air to the front brakes.
|
|
However, there is a limit to the maximum frequency which is called a "wall". To overcome this issue, overclockers raise the chip voltage to increase the overclocking potential. Voltage increases power consumption and consequently heat generation significantly (proportionally to the square of the voltage in a linear circuit, for example); this requires more cooling to avoid damaging the hardware by overheating. In addition, some digital circuits slow down at high temperatures due to changes in MOSFET device characteristics.
|
|
Pole mounting raises what would otherwise be a ground mounted array above weed shadows and livestock, and may satisfy electrical code requirements regarding inaccessibility of exposed wiring. Pole mounted panels are open to more cooling air on their underside, which increases performance. A multiplicity of pole top racks can be formed into a parking carport or other shade structure. A rack which does not follow the sun from left to right may allow seasonal adjustment up or down.
|
|
In 2000 the National Council of Teachers of Mathematics (NCTM) released the Principles and Standards for School Mathematics (PSSM), which was seen as more balanced than the original 1989 Standards. This led to some calming, but not an end to the dispute. Two recent reports have led to considerably more cooling of the Math Wars. In 2006, NCTM released its Curriculum Focal Points, Curriculum Focal Points, NCTM which was seen by many as a compromise position.
|
|
During the 2006 Goodwood Festival of Speed, Nissan Technical Centre Europe (NTCE) unveiled the 350Z GT-S The GT-S had a unique radial flow supercharger that could be turned on or off via a switch on the dashboard, raising the VQ35DE engine output to and without modifications to the engine components. The car also had new body kit for more cooling and downforce and wider 245 and 265/40/18 tires. The car was tested by automotive journalists, but none were marketed.
|
|
1967 Buick LeSabre Sport Coupe Somewhat more rounded sheet metal and a swoopier fastback roofline for the two-door hardtop highlighted the 1967 LeSabre but chassis and inner body were unchanged along with drivetrains. Both base and Custom-level LeSabres were continued. New options for 1967 included front disc brakes and a stereo 8-track tape player. The standard drum brakes were upgraded with more cooling fins and a dual- master cylinder system was introduced. Engine and transmission offerings were unchanged from 1966.
|
|
The most energy-conscious customers are the ones more likely to have had efficient thermostat settings, therefore, the savings that they receive from the smart thermostat may not be as great. The weather will also have an impact on the results of a study. Having very high temperatures in the summer and very cold temperatures in the winter will lead to more cooling and heating in those months, requiring more energy. When comparing year to year data, if one year had extreme temperatures, while the following year had moderate temperatures, the savings may look drastic.
|
|
This ratio is termed the coefficient of performance or COP and is a measured characteristic of a thermoelectric device. The COP is inversely related to the temperature difference that the device produces. As you move a cooling device further away from the heat source, parasitic losses between the cooler and the heat source necessitate additional cooling power: the further the distance between source and cooler, the more cooling is required. For this reason, the cooling of electronic devices is most efficient when it occurs closest to the source of the heat generation.
|
|
Conversely, the overclocker may decide to decrease the chip voltage while overclocking (a process known as undervolting), to reduce heat emissions while performance remains optimal. Stock cooling systems are designed for the amount of power produced during non-overclocked use; overclocked circuits can require more cooling, such as by powerful fans, larger heat sinks, heat pipes and water cooling. Mass, shape, and material all influence the ability of a heatsink to dissipate heat. Efficient heatsinks are often made entirely of copper, which has high thermal conductivity, but is expensive.
|
|
The outer edge of the habitable zone is where planets are completely frozen, but planets well inside the habitable zone can periodically become frozen. If orbital fluctuations or other causes produce cooling then this creates more ice, but ice reflects sunlight causing even more cooling, creating a feedback loop until the planet is completely or nearly completely frozen. When the surface is frozen, this stops carbon dioxide weathering, resulting in a build-up of carbon dioxide in the atmosphere from volcanic emissions. This creates a greenhouse effect which thaws the planet again.
|
|
Insoluble microgranular CMC is used as a cation-exchange resin in ion-exchange chromatography for purification of proteins. Presumably, the level of derivatization is much lower, so the solubility properties of microgranular cellulose are retained, while adding sufficient negatively charged carboxylate groups to bind to positively charged proteins. CMC is also used in ice packs to form a eutectic mixture resulting in a lower freezing point, and therefore more cooling capacity than ice.Use in ice packs Aqueous solutions of CMC have also been used to disperse carbon nanotubes.
|
|
Pinot Noir - grown for both sparkling and still wine production - is the dominant varietal for the region. A 2015 vineyard census determined that 87 of 91 vineyard properties in the region grow Pinot Noir. The Anderson Valley extends about 10 miles (16 km) from end to end and contains over 20 different types of alluvial soils. The area around the cities of Philo and Navarro, California in the center and north end of the valley receive considerably more cooling fog influence than the plantings closer to Boonville in the south.
|
|
Apart from the energy to drive the fans, water is the only other resource required to provide conditioning to indoor spaces. The effectiveness of evaporative cooling is largely dependent on the humidity of the outside air; dryer air produces more cooling. A study of field performance results in Kuwait revealed that power requirements for an evaporative cooler are approximately 75% less than the power requirements for a conventional packaged unit air-conditioner. As for interior comfort, a study found that evaporative cooling reduced inside air temperature by 9.6 °C compared to outdoor temperature.
|
|
Two exhaust recovery turbines shown outside impeller casing area (top (silver) and lower (red blading)) that are geared to the crankshaft. By 1943 the ultimate development of the new bomber program, the Boeing B-29 Superfortress, was flying. The engines remained temperamental, and showed an alarming tendency for the rear cylinders to overheat, partially due to minimal clearance between the cylinder baffles and the cowl. A number of changes were introduced into the Superfortress' production line to provide more cooling at low speeds, with the aircraft rushed into operational use in the Pacific in 1944.
|
|
A chiller is a refrigeration unit designed to produce cool (chilled) water for space cooling purposes. The chilled water is then circulated to one or more cooling coils located in air handling units, fan-coils, or induction units. Chilled water distribution is not constrained by the 100 foot separation limit that applies to DX systems, thus chilled water-based cooling systems are typically used in larger buildings. Capacity control in a chilled water system is usually achieved through modulation of water flow through the coils; thus, multiple coils may be served from a single chiller without compromising control of any individual unit.
|
|
Diving reptiles conserve heat by heat exchange mechanisms, whereby cold blood from the skin picks up heat from blood moving outward from the body core, re- using and thereby conserving some of the heat that otherwise would have been wasted. The skin of bullfrogs secretes more mucus when it is hot, allowing more cooling by evaporation. During periods of cold, some ectotherms enter a state of torpor, in which their metabolism slows or, in some cases, such as the wood frog, effectively stops. The torpor might last overnight or last for a season, or even for years, depending on the species and circumstances.
|
|
The car can accelerate from in 4.2 seconds, and can reach a top speed of over 300 km/h (186 mph). V12 TDI engine in the Audi R8 TDI Le Mans The R8 TDI Le Mans has modified suspension settings and brakes to cope with the additional power and weight (), resulting from replacing the standard V8 engine with the V12 TDI. The V12 TDI requires more cooling than the standard R8, hence a NACA duct is incorporated in the roof to feed additional air into the engine. The vents on the front and back of the car have also been increased by 20% in size.
|
|
The land to the west of the ranges, closest to the coast tend to have more maritime climate that includes more cooling and rain influences from the Pacific ocean. Among the wine regions in this cooler area are the Mendocino Ridge, the Anderson Valley and the Yorkville Highlands AVAs. East of the ranges, the climate turns warmer and more Mediterranean around Ukiah and along the path of the Russian River as it makes its way southward to Sonoma County. Among the Mendocino wine regions in this warmer area are the Redwood Valley, Potter Valley, Cole Ranch, McDowell Valley, Covelo, Dos Rios AVAs as well as most of the large general area Mendocino AVA.
|
|
Children who have controlling mothers and explore their environment at a far distance from her are able to employ more cooling strategies and delay rewards longer. Similarly, children who stay close to a non-controlling mothers also use more cool strategies and demonstrate longer delays. This suggests that some children of controlling mothers have better learned how to distract themselves from or effectively avoid intrusive stimuli, although additional effects on their emotional competency are speculated but unknown. A greater capacity to delay gratification by using effective attentional strategies is also seen in preschoolers whose mothers had been responsive and supportive during particularly stressful times of self-regulation when the child was a toddler, indicating that maternal responsiveness during highly demanding times is crucial for the development of self-regulation, self-control and emotional competency.
|
|
The luminaire had been released before the new, Series 200 software version required to control it from an Artisan was completely ready and—to begin with—it could only be controlled as a DMX luminaire, from a non-Vari-lite console. Maintenance was complicated by the location of some sub-assemblies in the luminaire, the Pan unit proving especially difficult to replace. The VL7 also featured more cooling fans than previous Vari-lite luminaires—a total of four and despite marketing claims of "virtually silent operation", the noise they produced did not go unnoticed by users. The VL7B replaced the fixed colour / gobo wheel, with a four-leaf motorised shutter gate, which could be used to mask the edges of the beam and could be rotated by 50°.
|
|
Many American marine canvas fabricators use an Acrylic fabric as well as those listed above. The lighter color materials reflect heat and sunlight and provides more cooling as any darker materials does the opposite and will produce a hotter environment but a darker shade. The thread used to stitch marine type canvas has often been Polyester thread with sizes ranging from #69, #92, #138 but with the popularity of PTFE threads that offer protection from the effects of UV, acids and many chemicals, Polyester thread is becoming more of a standby due to the far greater resistance of PTFE to ultraviolet radiation and the cost effectiveness of PTFE to the final product. Nylon is never used as it usually doesn't last longer than six months in direct sunlight.
|
|
The northbridge plays an important part in how far a computer can be overclocked, as its frequency is commonly used as a baseline for the CPU to establish its own operating frequency. This chip typically gets hotter as processor speed becomes faster, requiring more cooling. There is a limit to CPU overclocking, as digital circuits are limited by physical factors such as rise, fall, delay and storage times of the transistors, current gain bandwidth product, parasitic capacitance, and propagation delay, which increases with (among other factors) operating temperature; consequently most overclocking applications have software-imposed limits on the multiplier and external clock setting. Additionally, heat is a major limiting factor, as higher voltages are needed to properly activate field effect transistors inside CPUs and this higher voltage produces larger amounts of heat, requiring greater thermal solutions on the die.
|
|
The latent heat of water is 334 joules/gram. The phase change of water occurs at 0°C (32°F). Some applications use the thermal capacity of water or ice as cold storage; others use it as heat storage. It can serve either application; ice can be melted to store heat then refrozen to warm an environment which is below freezing (putting liquid water at 0°C in such an environment warms it much more than the same mass of ice at the same temperature, because the latent heat of freezing is extracted from it, which is why the phase change is relevant), or water can be frozen to "store cold" then melted to make an environment above freezing colder (and again, a given mass of ice at 0°C will provide more cooling than the same mass of water at the same temperature).
|
|
The class was a new design for Australian conditions based on other locomotives produced by Downer EDI Rail, such as the narrow gauge GT42CU AC purchased by Queensland Rail and Pacific National and the GT46C purchased by Westrail, Freight Australia and FreightLink. The GT42CU AC used a 12-cylinder EMD 710 engine, based on the USA built SD70MAC with scaled down traction motors, while the GT46C used a 16-cylinder EMD 710 engine with DC traction systems. The American SD70ACe was EMD's 2nd generation AC loco with IGBT inverters, but was too large and heavy for the Australian interstate standard gauge network, weighing in at 188 tonnes when the limit was 134 tonnes. In addition, the GT46C design was already at the 134 tonne limit, even before adding inverters, heavier traction motors and more cooling capacity for higher power engine, and there was a requirement that fuel capacity could not be sacrificed. The locomotive has AC traction equipment, with a Mitsubishi Electric package also used on the SD70ACe, including a TA17 traction alternator, CA9E companion alternator and six ITB 2630 traction motors, along with solid state IGBT inverters.
|
|