1000 Sentences With "manufactured from" | Random Sentence Generator

The soft artificial heart was manufactured from silicone using 3D-printing.

They're also manufactured from petroleum, which is extracted by oil drilling.

At the heart of the dispute is the fact that most Canadian softwood lumber is manufactured from trees grown on government-owned land, whereas the majority of U.S. softwood lumber is manufactured from trees grown on privately owned land.

Any device manufactured from this week on will have the update pre-installed.

The Quantum Syncro was from a range that was manufactured from 1981-1988.

The Nokia 6 is manufactured from a block of aluminum with diamond cut edges.

Nintendo's Game Boy Camera is an accessory that was manufactured from 1998 to 23.

But cement is manufactured from limestone using a chemical process that releases carbon dioxide.

Jay Leno's Bugatti 37A is the 3rd car manufactured from the American Bugatti Club.

The parts involved in the air bag problem were manufactured from July 16 to Nov.

The medical device maker said the affected StrataMR valves and shunts were manufactured from Oct.

It's a fundamental part of modern electronics and now the world's smallest has been manufactured from DNA.

"Our bio-inspired hybrid threads could be manufactured from virtually any components," said first author Hervé Elettro.

Huang, meanwhile, retooled the Air Max 1 to its lightest-ever construction (manufactured from post-consumer materials).

Now we're seeing attacks like the one outside Parliament in London where carnage is manufactured from the innocuous.

A source says the testimonial was manufactured from whole cloth by Singer after Schaepe's wife sent him the photo.

To get home, the crew will fill their ship with fuel manufactured from sunlight, Martian water, and Martian air.

Our essays are all manufactured from crushed souls — a passive voice with extravagant vocabularies — constantly interpreting, but never relating.

Altra achieves the lightweight by using an upper manufactured from quick-drying two-layer air mesh and Neoprene lining.

This tree-free paper is manufactured from 39.993 percent bagasse, a byproduct of sugarcane that is renewable and fast growing.

This spring, it has added a limited-edition piece manufactured from used skis made by the French ski label Zag.

One caveat: The device claims to work with any car manufactured from 2002 except diesel cars, which are supported from 2005.

The parachute 550 cord has many uses, including wrapping around these fire-starters that Stutts manufactured from dryer lint and Vaseline.

The 911 Turbo was manufactured from 1993 to 1998 and costs from $130,000 to $180,000, according to the New York Post.

Instead of an girl group manufactured in one country, we now have an all-girl band manufactured from around the world.

PG tips is aiming for all its tea bags to be manufactured from plant-based material by the end of 2018.

Instead, Junior would have to be pure data, manufactured from the ground up, driven by the real Will Smith through motion capture.

More than 763,000 tablets of the drug Amvalo, manufactured from April to July in Mylan, are the subject of recall, Pfizer Japan said in a statement.

They're manufactured from silica, a compound made of silicon and oxygen, because the material is abundant in the natural world and harmless to humans and animals.

Because plastics are manufactured from the ground up, we can control every step of the process to tweak them to suit just about any given need.

There was no evidence, however, that the mold affected the quality of the IV solutions, which were manufactured from July 2011 to November 2012, the department said.

Danone's 'Evian (Re)New' system is made up of a base dispenser and a 5-litre bubble manufactured from 100 percent recyclable plastic that contains the water.

But our appetite for low-cost shirts, pants, and athletic wear made from synthetic fibers is far from satisfied by all the polyester manufactured from recycled materials.

While most Navions were manufactured from 1946 to 1951, the F model — a remake of an original — was produced in the late 1950s with a bigger engine.

Biotech drugs are made from living cells, making it impossible to manufacture exact copies, unlike treatments manufactured from chemicals which can have generic versions after their patents expire.

Last year Shanghai police said they seized 3m locally made condoms manufactured from inferior and in some cases foul-smelling materials, following a 2013 bust of 5m fakes.

Share of biologics, or drugs manufactured from living organisms, will account for about 21 percent of the combined entity's pro-forma revenue, Catalent said on a conference call.

In 2014, for example, researchers in Canada designed a headset with a chinstrap manufactured from piezoelectric fiber composites that was able to harvest energy as the jaw moved.

The glass cooktops were manufactured from December 2016 through July 2019 and sold at Lowe's, Home Depot, Best Buy and other stores from March 2017 through August 2019.

A pill might be manufactured from ingredients sourced from multiple countries, shipped via several ports, packaged and repackaged in various countries and ultimately sold via an internet pharmacy.

The oil producer said it made chemicals using raw material, or feedstock, manufactured from that kind of plastic waste, processed by another company, Atlanta-based Nexus Fuels LLC.

The recall covers six models of MALM chests or dressers manufactured from 2002 to 2016, as well as about 100 other families of chests or dressers, it said.

It's a home manufactured from modular components, finished with the precision of an iPhone, and then delivered quickly, for a fraction of the cost required to build on-site.

Most of the raw materials contained in modern footballs will, ultimately, be manufactured from oil, although some of the adhesives and textiles could come from natural sources as well.

Since it is not possible to make exact copies of complex biotech medicines, which are manufactured from living cells, they cannot be called true generics as with simple pills.

William also took a trip to the Met's conservation lab last month, where researchers examined and x-rayed the hippo to better understand how he was manufactured from faience paste.

The film is manufactured from a transparent flexible substrate printed with silver nanoparticle ink to form ultrafine wiring of 2561 microns wide (22482 micron is one-thousandth of a millimeter).

The recall covers MALM chests or dressers manufactured from 1999 to 2016, China's General Administration of Quality Supervision, Inspection and Quarantine (AQSIQ) said in a statement posted on its website.

The Tamir missiles, which Iron Dome uses in its launchers, are mostly manufactured from parts made in the US and can attack targets anywhere from 4 to 70 km away.

Previously, library archivists had discovered that the covers of the three books had been manufactured from recycled materials, namely medieval manuscript fragments such as copies of Roman law and canonical law.

Now, a team of scientists from the National University of Singapore has developed a technique that uses cellulose to create an aerogel—which means it can be manufactured from waste paper.

Among the most popular at the moment are natural marble and engineered stone like Caesarstone and Silestone, which are manufactured from quartz and resin (and often referred to simply as quartz).

That means there can be a day when a plane is powered by recycled greenhouse-gas emissions or when a pair of yoga pants are manufactured from the pollution coming from a steel mill.

The violations stem from Husqvarna's failure to provide EPA with complete emissions testing data relating to engines used in handheld lawn, garden and forestry equipment manufactured from 2011 to 2013, the joint statement said.

Earlier in the year, Fiat Chrysler paid a $85033 million settled with California and federal regulators for Jeep Grand Cherokees and Ram 1500 trucks with diesel engines that were manufactured from 2014 to 2016.

At the older sites, the tools were larger and bulkier, with handaxes manufactured from volcanic rock found in the region; for the Acheulian culture, this was the way of things for hundreds of thousands of years.

Another area of concern for Toomey is the reduction of intellectual property protection for the makers of biologics, drugs manufactured from living organisms or cellular components such as proteins and DNA such as Botox and Humira.

The idea that social media networks are systematically discriminating against conservatives is manufactured from whole cloth—for example, Facebook is absolutely terrified of Republican backlash, while Twitter CEO Jack Dorsey has been bending over backwards to please them.

The TR-808, which was only manufactured from 1980 to 1983, is arguably one of the most impactful pieces of modern music hardware, having influenced the formation of hip-hop, trap, Miami bass, acid house, and Detroit techno.

The fact that potent illicit drugs can be manufactured from over-the-counter medications "has contributed to increased methamphetamine use in regions of the country less accessible to major drug trafficking pathways such as rural communities," Kirane said.

They were four millimetres square—no wider than a "W" on this page—and manufactured from a block of silicon that had been sliced, chemically treated, and then etched in acid, until the surface resembled a minuscule bed of nails.

A day before the Cruz remarks, Mr. Trump made a public display in Indiana of dining with the controversial author Ed Klein, whose books about President Obama and Hillary Clinton have been denounced by critics as containing scenes and dialogue manufactured from whole cloth.

Its bio promises "organic, certified fair trade memes manufactured from natural fiber w/ living wage distributed transparently to ur feed faster than u can say Primark," and the posts follow in much of the same sardonic vein, using sarcasm and highly relatable memes to take down everything from unethical diamonds and nylon and polyester garments to plastic bags and toothbrushes.

How green touring works Some of the ways Reverb assists artists in "greening up" their tours include requesting locally grown and/or plant-based catering, decreasing the number of traveling tour crew, selling merchandise manufactured from sustainable materials, replacing single-use batteries used in in-ear monitors with rechargeable ones, and retrofitting the musician's stage lights to be energy-efficient.

While reprints of the prestigious and oft-imitated EC Comics titles over the years have cemented a sterling reputation for series like Tales from the Crypt, scholars Greg Sadowski and John Benson mine less-well-known ten-cent anthologies like Black Magic, Weird Adventures, and more, heralding a time when cheap four-color printing processes meant that an easily reproducible palette would be manufactured from hand-separated colors.

The Bryan Steam Car was an American steam car manufactured from 1918 until 1923.

The Paul is an electric guitar made by Gibson, manufactured from 1978 to the 1980s.

The GMC AC 454 is a truck model that the GMC manufactured from 1940 on.

Often manufactured from recycled plastic, these reels are environmentally friendly and used for lighter weight cables.

Disposable specula are manufactured from transparent plastic, while stainless- steel specula may be sterilised and re-used.

However, this requires bulbs to be manufactured from fused quartz rather than silica glass to reduce breakage.

The yarn is commonly manufactured from cotton, but can also be made using acrylic, rayon and olefin.

The Humber Hawk is a four-cylinder automobile manufactured from 1945 to 1967 by British-based Humber Limited.

The definitive metre bar, manufactured from platinum, was presented to the French legislative assembly on 22 June 1799.

The Lanchester Thirty-Eight was manufactured from 1910 to 1914 by the Lanchester Motor Company, located in Birmingham, England.

By 1820, throwing was done using rectangular frames, manufactured from cast iron, and powered by belts from line shafts.

The Raleigh Dirt Cross was a children's bicycle manufactured from 1996-1999 by the Raleigh Bicycle Company of Nottingham, England.

André was a lightweight English two-seater sports car manufactured from 1933 to 1934 in London W11 by T.B. André.

The Jouvie was a French automobile manufactured from 1913 to 1914. A JAP- engined cyclecar, it was a product of Paris.

The anchor is manufactured from high- strength steel and possesses adjustable fluke fins that can be adapted to specific soil conditions.

The frame of the FJR1300 is a twin-spar design manufactured from aluminum alloy; the engine is a fully stressed member.

Juggling clubs are manufactured from different materials and construction methods and can therefore be divided into a number of broad types.

This model also had a low-pass filter with cutoff, resonance and decay controls and was manufactured from 1977 to 1982.

Modern glitter is usually manufactured from plastic and is rarely recycled leading to calls from scientists for bans on plastic glitter.

Thus, they are suitable for systems fed by well water. One defining feature of impact heads is they almost always have male pipe threads, as opposed to the female threads found on virtually all other sprinkler types. The sprinkler head was originally manufactured from metal. Since the 1970s, they have also been manufactured from thermoplastics for improved corrosion resistance.

It cost US$750. The Tiffany was only manufactured from October 1913 to March 1914, after which the Flanders name was revived.

The R60 and R60/2 are 600 cc boxer-twin that were manufactured from 1956 to 1969 in Munich, Germany, by BMW.

The Atalanta was an English automobile manufactured from 1937 until 1939 by Atalanta Motors Ltd in Staines, Middlesex. Two models were made.

G-spot vibrators are usually manufactured from materials that provide a pleasant touch: silicone, jelly, rubber, hard-plastic, or any combination of them.

The Goujon was a French automobile manufactured from 1896 until 1901. A four- seater voiturette, it featured an air-cooled 3½ hp engine.

The Paydell was an English automobile manufactured from 1924 until 1925. From Hendon, it was powered by a 13-9 hp Meadows four.

In such cases, a secondary sealing element might be manufactured from perfluoroelastomer and shaped in the form of a wedge, V or U.

1952 Alba car photographed at the Caramulo museum, 'Museu do Caramulo', Caramulo, Portugal Alba was a Portuguese automobile manufactured from 1952 to 1961.

The Korn et Latil was a French automobile manufactured from 1901 until 1902. It was a voiturette with a 3½ h.p. Aster engine.

1910 Everitt Four-30 Touring. The Everitt was an American automobile manufactured from 1909 until 1912 by the Metzger Motor Car Company in Detroit.

The indie rock band Swirlies named their 1993 album Blonder Tongue Audio Baton after a graphic equalizer that the company manufactured from 1959-61.

The Atla is a French automobile that was manufactured from 1957 to 1959 in the commune of Garches in the western suburbs of Paris.

Care must be taken when using some vintage pens manufactured from celluloid, as this material can become stained by long-term exposure to some inks.

Revolvers were manufactured from 1930 to 1941, and after World War II from 1946 to 1966 until competitively priced .357 Magnum revolvers became widely available.

The Armadale was an English automobile manufactured from 1906 to 1907 by Armadale Motors Ltd, Northwood, Middlesex, then Northwood Motor & Engineering Works, also of Northwood.

In terms of load-bearing capacity, cement-bonded particle boards have higher capacity than cement fibre boards. Cement particle boards are manufactured from thickness making it suitable for high load bearing applications. These boards are made of a homogeneous mixture and hence are formed as single layer for any thickness. Cement fibre boards are more used in decorative applications and can be manufactured from thickness.

The Model 13 has a blued finish; the Model 65 is a variant in matte finish stainless steel. The Model 13 was manufactured from 1974 to 1998. The Model 65 was manufactured from 1972 to 2004. The Model 13 should not be confused with the M13, which was a lightweight alloy revolver produced from 1954-56 for the U.S. Air Force, known as the Aircrewman.

There is no feedback adjustment in the detector circuit. The A-7b was also manufactured from 1950 to 1956 in Pardubice, Czechoslovakia by the Tesla company.

The De Riancey was a French automobile manufactured from 1898 until around 1901. A front-wheel-drive voiturette, it used an air-cooled flat-twin engine.

Iris 15 HP (1912) Iris was a British car brand that was manufactured from 1906-1925 by Legros & Knowles Ltd in Willesden, London and Aylesbury, Buckinghamshire.

It is manufactured from hyoscine, which occurs naturally in the plant deadly nightshade. It is avaialble in the United States for the medical treatment of horses.

The Rouxel was a French automobile manufactured from 1899 until 1900. The company produced two models, including a two-speed voiturette with 2½ h.p. Aster engine.

Angus Sanderson badge of H. H. Linz The Angus-Sanderson was an English automobile manufactured from 1919 to 1927 by Sir William Angus, Sanderson & Company Ltd.

Twenty-two units were manufactured from 1957 to 1958. Four examples remain in Germany. The three aforementioned types all had outside frames suitable for gauges from to .

The Corbin was an American automobile manufactured from 1904 to 1912 in New Britain, Connecticut. Early cars were air-cooled, but the company later added water-cooling.

Adding an excessive amount of plasticizer will result in excessive segregation of concrete and is not advisable. Depending on the particular chemical used, use of too much plasticizer may result in a retarding effect. Plasticizers are commonly manufactured from lignosulfonates, a by-product from the paper industry. Superplasticizers have generally been manufactured from sulfonated naphthalene condensate or sulfonated melamine formaldehyde, although newer products based on polycarboxylic ethers are now available.

The Enders was a French automobile manufactured from 1911 until 1923. A small cyclecar designed by a M. Violet, it ran on a two-stroke 500 cc engine.

The Buffum was an American automobile manufactured from 1901 until 1907 by the H.H. Buffum Co. of Abington, Massachusetts. The company also built a line of powered launches.

1916 Apperson Jack Rabbit Touring Car Apperson Chummy Roadster 1920 Apperson advertisement The Apperson was a brand of American automobile manufactured from 1901 to 1926 in Kokomo, Indiana.

The JG Sport was a French automobile manufactured from 1922 until 1923. A cyclecar built by one M. Janvier, it had a 970 cc Ruby engine and chain drive.

Standard pallet collars are manufactured from plywood, which provides the necessary quality. OSB or plastic pallet collars are also often used. Each of the materials has advantages and disadvantages.

The Denis de Boisse was a French automobile manufactured from 1901 until 1904. Its final product was a 12cv twin-cylinder light car with a patented double back axle.

The 2ES10 is a twin section (Bo'Bo)(Bo'Bo') freight locomotive manufactured from 2010 by Ural Locomotives. RZD ordered 221 units in 2010. Ukrainian Railways ordered 50 units in 2013.

Poland produced their own copies as the PW wz.33, manufactured from 1947 to 1959. In mid-50s a training version of PW wz. 33 was created, chambered in .

The Jeep Commander XK and XH (export diesel) is a mid-size SUV that was manufactured from 2005 to 2010 by the Jeep division of the American manufacturer Chrysler.

The Ardsley was a short-lived American automobile designed by W. S. Howard and manufactured from 1905 to 1906 in Yonkers, New York, by the Ardsley Motor Car Company.

Historically, the compound was manufactured from organic compounds containing nitrogen, iron filings, and potassium carbonate. Common nitrogen and carbon sources were torrified horn, leather scrap, offal, or dried blood.

Hyundai recalled certain model year 2012 Veloster vehicles manufactured from November 1, 2011, through April 17, 2012 and equipped with panoramic sunroofs, for possible weakened sunroof during installation at the factory. The safety recall began on January 22, 2013. In addition, model year 2012 Veloster vehicles manufactured from July 2, 2011, through February 27, 2012 and equipped with manual transmissions were recalled for binding of parking brake components caused by moisture and road grime.

The sugars, chelating agents in lignosulfonates such as aldonic acids and extractive compounds are mainly responsible for set retardation. These low range water reducing dispersants are commonly manufactured from lignosulfonates, a by-product from the paper industry. High range superplasticizers (dispersants) have generally been manufactured from sulfonated naphthalene condensate, although polycarboxylic ethers represent more modern alternatives. Both of these high range water reducers are used at 1/2 to 1/3 of the lignosulfonate types.

The EMD E6 was a , A1A-A1A, passenger train locomotive manufactured by Electro-Motive Corporation, and its corporate successor, General Motors Electro-Motive Division, of La Grange, Illinois. The cab version, E6A, was manufactured from November 1939 to September 1942; 91 were produced. The booster version, E6B, was manufactured from April 1940 to February 1942; 26 were produced. The was achieved by putting two , 12-cylinder, model 567 engines in the engine compartment.

Three prototype EA-6Bs were converted from A-6As, and five EA-6Bs were developmental airplanes. A total of 170 EA-6B production aircraft were manufactured from 1966 through 1991.

The Colda was a French automobile manufactured from 1921 until 1922. The company was based in Paris; the cars were built with an 1847cc four-cylinder engine produced by Sergant.

The Kyma was an English automobile manufactured from 1903 to 1905. Built by the New Kyma Car Company of Peckham, it came in twin-cylinder models of three and four wheels.

Eadie was an English automobile manufactured from 1898 until 1901. A product of Redditch, it was built as either a motor tricycle or quadricycle, and featured a 2¼ De Dion engine.

The Model 58 was manufactured from 1964 to 1977 and roughly 20,000 were produced. In 2008, it was released again by S&W;, both in bright nickel and bright blue finish.

"Pilot report: Volksplane." Air Progress, March 1970, pp. 39, 42. The VP-1 is a single-seat open-cockpit low-wing monoplane manufactured from Spruce and plywood with fabric covered wings.

Hillside has been the home of Bristol-Myers Squibb. Lionel Trains were manufactured from 1929 to 1974 at a factory located in Hillside that employed as many as 2,000 employees.Hatala, Greg.

The cannon is wide enough to contain a child. The bombard was manufactured from longitudinal bars of iron, hooped with rings fused into one mass.Chambers, Robert (1885). Domestic Annals of Scotland.

Modern Gitzo GT3541L with '6X' carbon fiber legs Gitzo have used a variety of materials. Early Gitzo tripods and monopods were manufactured from aluminum alloys, finished in the characteristic 'noir décor' hammered grey powder coating process developed in the 1970s. In 1994, carbon fiber legs were introduced into the range. In 2004, Gitzo introduced a new "basalt" series with tubes manufactured from silica fibers drawn from crushed and melted basalt rock, touting its vibration-damping properties.

Saxophone and sousaphone players at a charity festival in Chicago, July 1930 Most sousaphones are manufactured from sheet brass, usually yellow or silver, with silver, lacquer, and gold plating options, much like many brass instruments. However, the sousaphone (uniquely) is also commonly seen manufactured from fiberglass, due to its lower cost, greater durability, and significantly lighter weight. The weight of a sousaphone can be between and .About the Sousaphone - A member of the Tuba family, sousaphone.

Glue used to attach edges on tables is water-based and releases no VOCs. All steel products are manufactured from 100 per cent recycled scrap and are themselves 100 per cent recyclable.

The Jack Sport was a French automobile manufactured from 1925 until 1930. Built in Paris by one M. Corbeau (also a builder of motorcycles), it was a 410 cc single-cylinder cyclecar.

The Sablatnig-Beuchelt was a German automobile manufactured from 1925 until 1926. A 1496 cc four-cylinder designed by Sablatnig, it was similar to many other German cars of the early 1920s.

The Marca-Tre-Spade was an Italian automobile manufactured from 1908 until 1911. The four-cylinder ioe 24 hp cars, with four-speed gearboxes, were the product of a well-known gunsmith.

The Taurus is a Lamborghini Countach replica based on the VW Beetle. It was manufactured from 1984 until 1985, during which time about 32 were produced, most of them exported to Germany.

They often come in white and can be found in a variety of shapes. More recently, very low-cost erasers are manufactured from highly plasticized vinyl compounds and made in decorative shapes.

Steyr-Puch 500 The Puch 500 was a city car produced by Steyr-Daimler-Puch in Graz under license from Fiat. Based on the Fiat 500, it was manufactured from 1957 until 1975.

Some 3,000 of the Romi-Isettas were manufactured from 1956 to 1961. They kept the Iso design and used Iso engines until 1958; in 1959 they switched to the BMW 300 cc engines.

The Ingram Model 6 is a .45 ACP caliber submachine gun that was designed by Gordon B. Ingram and manufactured from 1949 through 1952 by the Police Ordnance Company of Los Angeles, California.

In some applications, regular eye wear, if manufactured from high-impact materials, can be worn with removable side shields. Oversized spectacles are also manufactured, designed to sit over the users normal eye wear.

Leuckart, J. prakt. Chem., [2] 41, 189 (1890). Alternatively, sodium sulfide and triazene can react in organic solutions and yield thiophenols. Thiophenol can be manufactured from chlorobenzene and hydrogen sulfide over alumina at .

The Ariès was a French automobile manufactured from 1903 to 1938. The first cars were equipped with two- and four-cylinder Aster engines. These shaft-drive cars had an unusual double rear axle.

The surrounding scenery is varied, while the higher grounds afford vistas over the adjacent countryside. Mats are manufactured from the seaweed extracted from the marshy area. It is in the community of Rhosyr.

The third generation Combo was manufactured from December 2011 to December 2017, and was based on the Fiat Doblò. The third generation Combo was manufactured in Turkey by Tofaş. Sales began in January 2012.

The Model 70 series, without suffix, was manufactured from 1958–1968. At some point in this period, the frame- mounted thumb safety was adopted, replacing the older cross-bolt safety of the Model 951.

Voiturette is a term used by some small cars and tricycles manufactured from 1895 to 1910. Cyclecars are a type of small, lightweight and inexpensive car manufactured mainly between 1910 and the late 1920s.

Solaris Alpino 8,9 LE is a low-entry bus built as a variation of the Solaris Alpino, developed for city transportation, manufactured from 2008 by Solaris Bus & Coach in Bolechowo near Poznań in Poland.

The only sealed anamorphic monobloc manufactured from a premium quality prime, the donor lens being the Leica 50mm 2 Summicron. The Iscorama 2004s were multicoated lenses, and featured a Leica R Mount camera fixing.

The Standard was an Italian automobile manufactured from 1906 until 1908 by the Fabbrica Automobili Standard of Torino. The company produced a 10/14 hp four-cylinder which was sometimes marketed under the name FAS.

The Komet was a German automobile manufactured from 1922 until 1924 by Komet Autofabrik Buchmann & Co of Leisnig. It was later made by another company as the Kenter, it had a 1060 cc Steudel engine.

Kawai XD-5 (1989) The Kawai R-100 and R50 drum machines were both manufactured from around 1987. The Kawai XD-5, a drum synthesizer based on the K4 engine, was produced in 1989-1990.

It is from this time that the company discontinued the manufacture of passenger cars to concentrate on commercial vehicles, trucks, vans and buses. This allowed the AFL/AFY to be manufactured from 1930 to 1937.

The Remington Arms Model 241 Speedmaster, an autoloading rimfire rifle, was manufactured from 1935 to 1951 from a John Browning design. Remington reports that 107,345 rifles were manufactured in .22 Short or .22 Long Rifle.

Screws, rivets, ribbons, bars and clips, specially designed to facilitate AD, can be manufactured from smart materials such as SMAs and SMPs. These will trigger at a pre-determined temperature, depending on the specific application.

The engine from the original XJ600 model was tuned towards improved low- and midrange power, sacrificing some peak power. 600cc Diversion models were manufactured from 1992 to 2004. US Seca IIs were manufactured from 1992 to 1998. As the Diversion/Seca II design is based on an earlier, well-matured model, changes made to the bike during these years were rather subtle, mostly concerning improvements in fairing: a second front-brake disc and small oil cooler appeared on the 1998 model along with improvements to the carburettors.

Currently, it is the second train with SMRT's new white pixelated livery with red, yellow and black colour scheme, which is similar to Bukit Panjang LRT's C801A, as compared to the older SMRT trains. The C151B trains are the first trains to have a full white front unlike the older batch of trains with a black front. The first eight trains manufactured from 2015 received the new livery with the older SMRT logos, while subsequent trains manufactured from 2016 were painted with new SMRT logos.

Construction of the building and dome, undertaken by the Australian companies Leighton Contractors and Evans-Deakin Industries respectively, began in late-1970 and was completed by the end of 1972. The building was manufactured from concrete, stands 26m high and has seven floors housing offices, labs and a mirror aluminising chamber. The telescope stands on a concrete pier with a separate foundation to the main building, to reduce the risk of vibrations. The double skinned dome is manufactured from both steel and aluminium and weighs 570 tonnes.

22 Remington CFM (Centerfire Magnum) cartridge or the .22 Remington Jet and chambered a version of the Model 17 in this caliber designating it the Model 53. The Model 53 was manufactured from 1960 to 1974.

The Kenter was a German automobile manufactured from 1923 until 1925. Successor to the Komet, it was available in either an sv four with 1060 cc Steudel engine or an Atos-engined model of 1305 cc.

The Jean-Bart was a French automobile manufactured from 1907 until 1907. Successor to the Prosper-Lambert, the company built shaft-driven cars, single- cylinders of 9 hp and fours of 16 hp and 40 hp.

They need to be manufactured from rigid materials that do not move. These materials may include steel or aluminum. The backrest can have cushioning but it cannot be thicker than . It cannot have any movable parts.

A Russian clone of the ZX Spectrum which used PZY K573PF2(5) to produce the TV signal. It was developed and manufactured from 1991 but was never made in as many copies as the Leningrad 1.

Diosmin (diosmetin 7-O-rutinoside), a flavone glycoside of diosmetin, is manufactured from citrus fruit peels as a non-prescription dietary supplement used to aid treatment of hemorrhoids or chronic venous diseases, mainly of the legs.

The Chainless was a French automobile manufactured from 1900 to 1903 in Paris by SA des Voitures Légère Chainless. The cars used Abeille or Buchet engines of 10, 16, and 20 cv, were shaft-driven voiturettes.

They need to be manufactured from rigid materials that do not move. These materials may include steel or aluminum. The backrest can have cushioning but it cannot be thicker than . It cannot have any movable parts.

The Joel-Rosenthal was an English electric car manufactured from 1899 until around 1902. Designed by Henry M Joel and London-built, the car had a separate 2 hp engine with chain drive for each rear wheel.

Appliance conductors for domestic applications and instruments are manufactured from bunch-stranded soft wire, which may be tinned for soldering or phase identification. Depending upon loads, insulation can be PVC, neoprene, ethylene propylene, polypropylene filler, or cotton.

Cement is manufactured from limestone, and cement pipes are prepared from cement. In the village Chichali, utensils are prepared from a metal called "peetal", a combination of copper and zinc. Chichali is very famous for these items.

S. Smith And Sons (Motor Accessories). The Times, 9 December 1927; pg. 23; Issue 44760. The Jackall hydraulic jacking system was manufactured from 1935 by Smith's Jacking Systems and immediately became standard equipment in many popular cars.

Both are manufactured from HT steel. The new 16" GP comes in white, with the new braking lever and disk brakes. The new GP 20" come in black and also has the new braking handle and disk brakes.

Stanwood Six The Stanwood was an American automobile manufactured from 1920 until 1922 in St Louis, Missouri. An assembled car with Continental 7R six- cylinder engine, it was offered in a variety of open and closed body styles.

The Great Eagle was an American automobile manufactured from 1910 to 1915. It was located in Columbus, Ohio, and the president was Fred C. Myers. They were mostly large cars. Unfortunately, the company went into receivership in 1915.

The Fimer was an Italian automobile manufactured from 1948 until 1949. One of many mini-cars built in the years following World War II, it had a 246 cc two- stroke rear-mounted motorcycle engine; few were constructed.

The Ursus C-45 and C-451 was a popular Polish model of tractor. It was manufactured from 1947 to 1959 by the Ursus Factory in Warsaw, and from 1960 to 1965 by Zakłady Mechaniczne in Gorzów Wielkopolski.

Gurlen is a notable bread producer. Gurlen has a shoe factory which is a Joint-Stock Company called the “Khorasm Poiafzali”, or Garlen Shoe Factory. It was established in 1988. Shoes are manufactured from raw materials, particularly leather.

In World War II, the Wesseling synthetic oil plant was bombed during the Oil Campaign of World War II. Then in April 1944, a large underground plant for synthetic oil manufactured from lignite was set up outside Bergheim.

The Bij 't Vuur was a Dutch automobile manufactured from 1902 until 1906. The first cars had Aster engines but later ones used De Dion-Bouton or Panhard units. In 1902 a 9 h.p. and a 12 h.p.

The Grumman JF Duck was manufactured from 1934 until 1936, when production switched to the J2F Duck and later variants.Jordan, Corey C. "Grumman's Ascendency: Chapter Two." Planes and Pilots Of World War Two, 2000. Retrieved: 22 July 2011.

Products manufactured from this plant include HVAC, EC modules, Evaporators, Radiators, Condensers, and Heater cores. Processes include Forming of coil stock, Nocolok and vacuum brazing, Tube welding, Injection molding, Stamping, Module assembly, Surface treatment, Testing, and Prototype build.

By 1910, the number of workers had increased to 140. Several models of the Deal Automobile were manufactured from 1908 until 1911, with costs ranging from about $950 to $1,250. The company went out of business in 1915.

Slip tip (Luer-slip) fittings simply conform to Luer taper dimensions and are pressed together and held by friction (they have no threads). Luer components are manufactured from either metal or plastic and are available from many companies worldwide.

The main armament of the first prototype was a domestic 90 mm cannon. A second prototype was equipped with a British Ordnance QF 20 pounder. Another ten tanks armed with the 105 mm cannon were manufactured from 1960-1961.

The Econoom was a Dutch automobile manufactured from 1913 until 1915. Only 85 vehicles, all light cars, were produced by the Amsterdam firm of Hautekeet & Van Asselt; they used Ballot engines and a MAB chassis, all imported from France.

The Keystone The Keystone was an American automobile manufactured from 1914 until 1915. Designed by Chas C. Snodgrass and built in Pittsburgh, it ran using a Rutenber 55 hp six engine. It was built on a 138-inch wheelbase.

It was used as a side arm by cavalry, infantry, artillery troops, and naval forces. More than 200,000 were manufactured from 1860 through 1873. Colt's biggest customer was the US Government with no less than 129,730Hogg, Ian V. (1987).

The Konstal 105Na are a class of Polish trams manufactured from 1979 to 1992 in workshops Konstal Chorzow, Poland. The narrow-gauge version is designed as 805Na. As of 2016 they are still the most common trams in Poland.

The Electricar was a French electric car manufactured from 1920 until 1921. An urban car, it used a ½hp electric engine manufactured by a M. Couaillet of Paris. It was a single-seat tricar with a single front wheel.

The vz. 38 is a semi-automatic pistol manufactured from 1939 until 1945 chambered in .380 ACP (in Europe called 9×17mm Browning Short). The barrel is attached to the frame by a hinge, allowing for very easy disassembly.

The Hotchkiss Revolving Cannon, 1874 The Hotchkiss rapid fire 37 mm multi- barrel gun "canon-revolver", manufactured from 1879 Benjamin Berkeley Hotchkiss (October 1, 1826 - February 14, 1885) was one of the leading American ordnance engineers of his day.

The GTA Spano utilises a monocoque chassis design, manufactured from carbon fibre and reinforced with titanium and Kevlar composites. The second generation model also introduces graphene elements into this design, for the purpose of added chassis stiffness and rigidity.

An example of strong sustainability could be the manufacturing of office carpet tiles from used car tyres. In this scenario, office carpets and other products are manufactured from used motorcar tires that would have been sent to a landfill.

Jawa 250 type 592 is a motorcycle popularly called Panelka and was developed by Jawa. It was manufactured from 1969 to 1974. The predecessor to this bike was Jawa 250/559 Panelka. Model 592 basically had only design innovations.

358 were manufactured by Datong from 1981 to 1986. 434 of a revised 'B' specification were manufactured from 1986 to 1988,. The second tranche received numbers starting from 8001. In total, 1916 JS locomotives of all types were produced.

The Lufbery was a French automobile manufactured from 1898 until around 1902. Built by Charles-Edouard Lufbery, it was a rear-engined vee-twin which combined epicyclic gearing and three-speed belt transmission to create a primitive form of overdrive.

The Fina-Sport was an American automobile manufactured from 1953 until 1954. The brainchild of Perry Fina, it used a Cadillac V-8 engine and Hydramatic transmission mounted on a Ford chassis. Styling of both convertibles and hardtops was by Vignale.

A few select kits have also been manufactured from metal. These kits are offered by several different manufacturers and most commonly will result in a finished model of about MG level. These types of models usually take days to build.

19th-century style gas lights in New Orleans There are two broad classes of fuel gases, based not on their chemical composition, but their source and the way they are produced: those found naturally, and those manufactured from other materials.

The Rover 9 was a small car produced by Britain's Rover car company. It had a 1074 cc 9 fiscal horsepower four-cylinder engine. Manufactured from 1924 to 1927 it was first supplemented then replaced by Rover's 10-12 model.

The Nissan 1400 is a flatbed truck, which was manufactured from 1971 to 2008 in South Africa under changing designations. Its successor is the Nissan NP200. It was first manufactured by Rosslyn Motor Assemblers, which later became Nissan South Africa.

Wakeskating is an adaptation of wakeboarding that employs a similar design of board manufactured from maple or fibreglass. Unlike wakeboarding, the rider is not bound to the board in any way, similar to the skateboard, from which the name derives.

The Gilburt was an English automobile manufactured from 1904 to 1905 in Kilburn, London. It was a two or three seater light car with a 6 hp twin- cylinder engine from Fafnir and used a tubular chassis and chain drive.

Because the actuating member can fold on itself, it can be stored relatively compactly in a storage magazine, either in an overlapping or coiled arrangement. Rigid chain actuators are generally driven by electric motors. Most rigid chains are manufactured from steel.

22LR, 6.35 mm/.25 ACP, and 7.65 mm/.32 ACP. Ruby Extra revolvers represented Gabilondo's economy range of revolvers. Manufactured from 1955 to 1970 they are copies of the Smith & Wesson Military and Police models, but fitted with coiled mainspring.

This technique has long been used to produce flexible metal wire by drawing the material through a series of dies of decreasing size. These dies are manufactured from a number of materials, the most common being tungsten carbide and diamond.

The heat of reaction evaporates all water present in the system, forming a powdery salt. Approximately 6000M tons were produced in 1981. Ammonium sulfate also is manufactured from gypsum (CaSO4·2H2O). Finely divided gypsum is added to an ammonium carbonate solution.

Madapollam's linen weave pattern. Madapollam is a soft cotton fabric manufactured from fine yarns with a dense pick laid out in linen weave. Madapollam is used as an embroidery and handkerchief fabric and as a base for fabric printing.Madapollam, Texsite.infoW.

Conjugated estriol, sold under the brand names Progynon and Emmenin, is an estrogen medication which was previously used for estrogen-type indications such as the treatment of menopausal symptoms in women. The term specifically refers to formulations of estriol conjugates which were manufactured from the estrogen-rich urine of pregnant women and were used as medications in the 1920s and 1930s. Conjugated estriol is analogous to and was superseded by conjugated estrogens (brand name Premarin), which is manufactured from the urine of pregnant mares. Conjugated estriol was among the first forms of pharmaceutical estrogen to be used in medicine.

Vietnamese Hyundai i10 Hyundai models are manufactured from CKD kits by Hyundai Thanh Cong Auto, a joint venture between Hyundai and Vietnam's Thanh Cong Auto. Hyundai reportedly strongly considered building a manufacturing plant in Ninh Binh, to produce the Grand i10 model.

Crossway 12.8 m Manufactured from 2007 until 2013 replacing the Arway 12.8 m and Axer 12.8 m, in 2013, the Crossway 12.8 m was replaced with the 13 m variant. Crossway 13 m Manufactured since 2013 as the replacement for Crossway 12.8 m.

The 427 is a replica of the AC Cobra, manufactured from 1988 until 1990. About 28 were built, 18 of them with a front engine and rear-wheel drive configuration, and 10 for export to France based on the VW floor pan.

With the same body as the 303, the 309 offered the same amount of room at a lower cost and a lower tax rating based on its smaller engine. The 309 was manufactured from 1934 to 1936, with a total of 6,000 made.

The De Marcay was a French automobile manufactured from 1920 until 1922. Similar to the GN, it was a cyclecar powered by a 1000 cc Anzani vee-twin engine and shaft drive, and was the product of a former manufacturer of aircraft.

The Desberon was an American automobile manufactured from 1901 until 1904. The company initially built steam trucks, and later branched out into making 4 hp gas-driven "pleasure carriages" built along "French lines". Later still, 6·2 liter 12 hp models were produced.

In the early part of the twenty- first century, the Thor name and logo was resurrected on washing machines manufactured from Australia. The new company had no ties with the original company, other than the use of the Thor logo and name.

Work on the memorial began immediately thereafter. On 27 May 2009 at 10:35 a.m. – the exact time of the assassination – a celebratory unveiling of the completed memorial was held. The figures are manufactured from bronze cast from a clay- modelled statue.

The Lyons-Knight was an American automobile manufactured from 1913 until 1915. A product of Indianapolis, the cars were produced by the Lyons-Atlas Company and featured Knight sleeve valve engines and worm-drive rear axles; they were designed by Harry A. Knox.

The Class 57 diesel locomotives were re-manufactured from Class 47s by Brush Traction of Loughborough between 1998 and 2004. The locomotives were fitted with re-conditioned EMD engines and the same model of traction alternator as that fitted to the Class 56.

The Afanasevo economy included cattle, sheep, and goat. Horse remains, either wild or domestic, have also been found. The Afanasevo people became the first food- producers in the area. Tools were manufactured from stone (axes, arrowheads), bone (fish-hooks, points) and antler.

Hansen & Schneider were a range of limited production motorcycles produced by the German MV Agusta importers Michael Hansen and engineer Roland Schneider based on the MV Agusta 750 Sport America and the 350 Ipotesi models. The machines were manufactured from 1975 to 1982.

Salomon Stanley was one of the earliest town settlers. His twin sons, Francis Edgar (F.E.) and Freelan Oscar (F.O.) became famous as manufacturers of Stanley Dry Plate, bought in 1903 by Eastman Kodak, and the Stanley Steamer automobile, manufactured from 1902-1924.

Manufactured from 1997 to 1999 — the deepest years of the "cigar bust" which followed the faddish cigar boom of the 1990s — Bogey's Stogies proved an unprofitable venture. By the spring of 1999, Rubin found himself approximately $60,000 in debt and facing failure of his venture.

An inkstone is a stone mortar for the grinding and containment of ink. In addition to stone, inkstones are also manufactured from clay, bronze, iron, and porcelain. The device evolved from a rubbing tool used for rubbing dyes dating around 6000 to 7000 years ago.

Tetrafluorohydrazine or dinitrogen tetrafluoride, , is a colourless, reactive inorganic gas. It is a fluorinated analog of hydrazine. It is a highly hazardous chemical that explodes in the presence of organic materials. Tetrafluorohydrazine is manufactured from nitrogen trifluoride using an iron catalyst or iron(II) fluoride.

1916 Elcar The Elcar was an American automobile manufactured from 1915 until 1931. The car was produced by the Elkhart Carriage Company, owned by William and George Pratt, of Elkhart, Indiana, which had been in business for over 30 years before producing its first car.

The Couverchel was a French automobile manufactured from 1905 to 1907. The firm offered cars ranging from 12/16 hp to a 40/50 hp six. The company moved to Boulogne-sur-Seine from Neuilly in 1906, prompting a change in its name to C.V.R..

The Eureka was a French automobile manufactured from 1906 until 1909. A single-cylinder voiturette with friction transmission and belt final drive, it was built at Automobiles Mainetty from La Garenne-Colombes, and used either a 6hp De Dion or a 12hp Anzani engine.

The third part of the novel takes place on the Moon. Lunar society is diverging radically from that of Earth. The lower gravity has produced people with a very different physique. Their food supply is manufactured from algae and distasteful to inhabitants of Earth.

Strand Woven Bamboo Flooring Bamboo flooring. A bamboo floor is a type of flooring manufactured from the bamboo plant. The majority of today's bamboo flooring products originate in China and other portions of Asia. Moso bamboo is the species most commonly used for flooring.

The Mayflower was manufactured from 1949 until 1953. The Mayflower's "upscale small car" position did not find a ready market, and sales did not meet Standard's expectations. The company's next small car, the Standard Eight of 1953, was a basic 0.8-litre economy car.

Metsovone () is a semi-hard smoked pasta filata cheese produced in the region of Metsovo (Epirus, Greece). Metsovone has been a European protected designation of origin since 1996. Metsovone is manufactured from cow’s milk or a mixture of cow and sheep or goat milk.

Wakeskating Wakeskating is a water sport and an adaptation of wakeboarding that employs a similar design of board manufactured from maple or fibreglass. Unlike wakeboarding, the rider is not bound to the board in any way, similar to the skateboard, from which the name derives.

Emmenin and Progynon were estriol products marketed in the 1930s which were manufactured from the urine of pregnant women and contained estriol conjugates, primarily estriol glucuronide. Estriol for multiple sclerosis had the tentative brand name Trimesta but did not complete development and was never marketed.

The V.11 was manufactured from 1951 to 1952, with the body from Garavini. It was powered by a Lancia V10 engine, producing . In the side of the doors the seats are double. The city bus version was long, and a suburban version was long.

SL35 Lightwriter, manufactured from 1994 - 2008 SL40 Lightwriter, manufactured from 2008 Lightwriters are a type of speech-generating device. The person who cannot speak types a message on the keyboard, and this message is displayed on two displays, one facing the user and a second outfacing display facing the communication partner or partners. A speech synthesiser is also used to provide speech output, and some models offer the facility to connect to a printer to provide printed output. For people who are unable to use a keyboard, some models of Lightwriter offer the option of an on-screen keyboard with selection made by a switch using a scanning technique.

In Germany and some other countries, tequila oro (gold) is often consumed with cinnamon on a slice of orange after, while tequila blanco (white) is consumed with salt and lime. Bandera of Mexican tequila If the bottle of tequila does not state on the label that it is manufactured from 100% blue agave (no sugars added), then, by default, that tequila is a mixto (manufactured from at least 51% blue agave). Some tequila distilleries label their tequila as "made with blue agave" or "made from blue agave". However, the Tequila Regulatory Council has stated only tequilas distilled with 100% agave can be designated as "100% agave".

The production of town gas, manufactured from imported coal, was so adversely affected that regulations were brought in limiting its use, enforced by the "Glimmer Man".Coogan, (2003). Ireland in the Twentieth Century, pages 246-47 Britain relaxed these restrictions from 19 July 1944.Wood, (2002).

The company's rolling stock includes an electric range of trams manufactured from across Japan and Europe, earning it the nickname "The Moving Streetcar Museum". From January 2008 the company has accepted PASPY, a smart card ticket system. This is the longest tram network in Japan, with .

The Korn et Latil was a French automobile manufactured from 1901 until 1902. It was a front wheel drive voiturette with a 3½ hp Aster engine, and was designed by Georges Latil, who later became known for his front wheel drive commercial vehicles manufactured as Latils.

A boot bracelet is used to decorate boots. Colloquially, handcuffs are sometimes called bracelets. Bracelets can be manufactured from metal, leather, cloth, plastic, bead or other materials, and jewelry bracelets sometimes contain jewels, rocks, wood, shells, crystals, metal, or plastic hoops, pearls and many more materials.

1908 Matheson Landaulet The Matheson was an American automobile manufactured from 1903 to 1912. The President of the company was Charles Walter Matheson,Wilkes-Barre Times, October 9, 1906, Page 10. born Grand Rapids, Michigan, March 22, 1876. His brother, Frank F. Matheson served as company secretary.

They were known as "The New Departure" to reflect the company's new approach to designing revolvers. Minor design changes were made to these revolvers over the years, resulting in several different design models, as termed by collectors. The first model was manufactured from 1887 to 1902. The .

The Flaid was a Belgian automobile manufactured from 1920 until 1921 in Liège. A 10/12 hp light car with 1095 cc four-cylinder engine, it was designed for export to Britain. A stand was booked at the 1920 British Motor Show but the car never appeared.

A case study conducted by the University of British Columbia found that fiberglass outlives vinyl and wood by as much as 38%. Majic fiberglass windows are manufactured from pultruded fiberglass. They can be painted any color and come in a variety of different shapes and styles.

Tyne & Wear County Council Museums Service Information Sheet Armstrong Whitworth car front.Unknown date about 1979 The Armstrong was an English automobile manufactured from 1902 to 1904; "claimed to be the best hill- climber extant", the car featured an International engine.Armstrong Automobiles. CarsPlusPlus.com. Accessed 24 March 2012.

The 1.8-liter Hyundai G4GB engine was manufactured from 2000 to 2010 in Korean Ulsan and was put on such popular models of the concern as Elantra, Cerato and Matrix. The motor belonged to the Beta II series therefore had an upgraded design relative to its predecessors.

Jiangxi Isuzu Motors Co.,Ltd. (JIM) is a Nanchang-based joint venture between Isuzu and JMCG established in 1983. Isuzu N-series trucks were manufactured from 1985 onwards by Jiangxi Automotive Manufacturing Plant. In 1993, shortly before JMC were spun off, Jiangxi Automobile Manufacturing Co., Ltd.

Hasbro began producing the company's action figures in 1990. The toys were manufactured from plastic and although not fully articulated, had various spring-loaded action features such as punches and clotheslines, although they were not unique to each figure. For more info visit WWF Hasbro action figures.

In the mid-1990s, jenkem was reported to be a popular street drug among Zambian street children manufactured from fermented human waste.Fuller, Alexandra (2005). The effects can be super dramatic including seizures, vomiting, and hallucinations We just want enough. National Geographic, Volume 208, Issues 1-3, p.

Solaris Alpino is a low floor bus built as part of the Solaris Urbino series, developed for city transportation, manufactured from 2007 by Solaris Bus & Coach from Bolechowo near Poznań in Poland. In 2008 the longer variation of the bus Solaris Alpino 8,9 LE came into production.

In 1884, the company introduced a small foundry for cast steel, which was the first industrial scale steel production in the Netherlands. With this addition, the company began using cast steel for the production of war materiels which were previously manufactured from cast iron or wrought iron.

A mildly customised Sunbeam S7 motorcycle. The S models were designed for BSA by Erling Poppe and manufactured from 1946 to 1956. There were three: the S7, S8 and S7 Deluxe. All three were very expensive but with only modest performance which resulted in low sales.

Cars made in 2006 to 2008 model years (potentially anything manufactured from 1 January 2005 to the end of the 997.1 model life) received an unserviceable bearing type. For these cars it is recommended to remove the bearing seal to allow oil to lubricate the bearing.

Ornaments made from bones and teeth of babirusa deer-pig and bear cuscuses (Ailurops ursinus) marsupial, was unearthed from limestone caves in Sulawesi. These jewellery was ingeniously manufactured from the teeth of the primitive pigs and bones of marsupials, estimated dated to between 22,000 and 30,000 years ago.

The El Fenix was a Spanish automobile manufactured from 1901 until 1904. A product of Barcelona, it was built by Domingo Tamaro Y Roig, who had worked with La Cuadra; he built a few twin-cylinders with gas engines under this name before joining Turcat-Méry in 1904.

The maximum sail surface, comprising two sails, amounts to 10 m² according to the class regulations. Since the 1960s, spinnakers up to 10 m² are also permitted. The use of a Genoa or Gennaker is not permitted. The sails can be manufactured from cotton, linen or synthetic fabrics.

The Enfield No. 2 was a British top-break revolver using the .38/200 round manufactured from 1932 to 1957. It was the standard British/Commonwealth sidearm in the Second World War, alongside the Webley Mk IV and Smith & Wesson Victory Model revolvers chambered in the same calibre.

Loch Killisport sported a gunshield manufactured from GRP to test this material for suitability of constructing the housing of the new 4.5-inch gun Mark 8. Loch Fada paid off in 1967 and was used to test an early vertical launch variant of the new Sea Wolf missile.

After Triumph at Meriden collapsed, a new firm, Triumph Motorcycles Ltd, was established at Hinckley. The new firm manufactured from 1990 a new range of motorcycles with a modular engine design. Some of these bikes were called "Triumph Tridents"; and much later a "Triumph Rocket III" was produced.

The Dalifoil & Thomas was a French automobile manufactured from 1896 until 1898. A voiturette built in the Dulac factory in Montreuil-sous-Bois, it was powered by two separate De Dion engines. In 1899 the company introduced a motor tricycle with a "Dust proof" two-speed constant-mesh gearbox.

The Ehrhardt was a German automobile manufactured from 1905 until 1924. The company was founded by Gustav Ehrhard, son of Heinrich Ehrhardt of Dixi. Its operations were centered at Zella-St-Blasii and at Düsseldorf. Ehrhardts came in two- and four-cylinder models of high quality and price.

These are tuned to the important tones (swaras) of the raga. A properly tuned sarangi will hum and cry and will sound like melodious meowing, with tones played on any of the main strings eliciting echo-like resonances. A few sarangis use strings manufactured from the intestines of goats.

Fishbone Gaskets are direct replacements for Kammprofile and Spiralwound gaskets. They are fully CNC machine manufactured from similar materials but the design of the gaskets has eliminated inherent short comings. Fishbone gaskets do not unwind in storage or in the plant. The rounded edges do not cause flange damage.

The main superstructure was manufactured from 6 mm to 12 mm armour steel. The bottom parts of the vehicle were mine strengthened. The windows are bullet- resistant and equipped with protective hatches. As for the off-road qualities XA-180 can take inclines up to maximum of 60°.

DRASH shelters have footprints from up to . Each DRASH shelter comes with flooring and ground covers manufactured from polyester and nylon to US military standards. DRASH also provides generators and trailers plus various accessories for the shelters themselves. Several of these accessories can be used to link shelters together.

HDPE has high tensile strength. It is used in products and packaging such as milk jugs, detergent bottles, butter tubs, garbage containers, and water pipes. One-third of all toys are manufactured from HDPE. In 2007, the global HDPE consumption reached a volume of more than 30 million tons.

On the road, drilled or slotted discs still have a positive effect in wet conditions because the holes or slots prevent a film of water building up between the disc and the pads. Example of two piece disc in an aftermarket application Two piece discs (rotors) are a disc where the center mounting part of the disc is manufactured separately from the outer friction ring. The central section used for fitment is often referred to as the bell or hat and is commonly manufactured from an alloy such as a 7075 alloy and hard anodised for a lasting finish. The outer disc ring or rotor usually is manufactured from grey iron but in special applications can be from steel.

The Joswin was a German automobile manufactured from 1920 until 1924. Big luxury cars, they were powered by war-surplus Mercedes six-cylinder, 12 spark plug aeroengines of 6462 cc and 7269 cc which had been modified by designer Josef Winsch; construction took place at his works in Berlin-Halensee.

The handgun has an ambidextrous manual safety that is frame mounted. SCCY designed the pistol with an internal hammer and has a double action trigger pull. All parts of the CPX-1 pistol, except for the springs, are manufactured in-house by SCCY. Slides are manufactured from heat treated hex steel.

It cannot be used to push off from. Rests can be used on the frame but they need to be present only for safety reasons and to aide in athlete stability. They need to be manufactured from rigid materials that do not move. These materials may include steel or aluminum.

Radiolarite is a very hard rock and therefore was extensively used by stone-age man for tools and weapons. Radiolarite has therefore been called the "iron of the Paleolithic". Axes, blades, drills and scrapers were manufactured from it. The cutting edges of these tools, however, are somewhat less sharp than flint.

It cannot be used to push off from. Rests can be used on the frame but they need to be present only for safety reasons and to aide in athlete stability. They need to be manufactured from rigid materials that do not move. These materials may include steel or aluminum.

Florantyrone (INN; also known as fluorantyrone) is a drug used in the treatment of biliary dyskinesia. It is also known as a cholagogue and choleretic. It is manufactured from fluoranthene and succinic anhydride in the presence of aluminum chloride in a nitrobenzene solution. (US PATENT 2,560,425 (1951 To Miles Lab)).

The Suzuki GSX-R is a series of sport bikes made by Japanese manufacturer Suzuki. Current models are the GSX-R125 and GSX-R150 since 2017; GSX-R600 which was manufactured from 1992 to 1993, and then since 1997; the GSX-R750 since 1985; and the GSX-R1000 since 2001.

Sonic soot blowers are normally constructed from fabricated, 316 grade stainless steel as opposed to some sonic horns which are manufactured from heavy cast iron. For installations in harsher environments, such as high temperature or acidic gas streams, other types of stainless steels are used such as 310, 316 and 825.

300px Based on a John Browning design and manufactured from 1922–1935, the Remington model 24 is a semi-automatic rifle chambered in either .22 Short or .22 long rifle. It is very closely related to the Browning 22 Semi-Auto rifle (the Browning SA-22) which is still in production.

1920), Rowland Drug Company (1902), Merchants and Farmers Bank (1911), Former Fire Station (c. 1948), and Rolling Milling Company (c. 1940). Six buildings have stamped metal fronts manufactured from galvanized sheet iron by the Chattanooga Roofing and Foundry Company. It was added to the National Register of Historic Places in 2005.

Worker pulling out buntal fibers manually from the buri palm petiole (c.1912) Buntal hats are manufactured from buntal fiber extracted from buri palms (Corypha spp.). Most buntal fibers are sourced from the buri plantations of Quezon Province. Traditionally, it is extracted by from seven to ten-year old buri palms.

Colt Diamondback rollmark The Colt Diamondback is a revolver manufactured by Colt's Manufacturing Company of Hartford, Connecticut, in calibers of .22 LR and .38 Special. Inspired by the successful Colt Python, the Diamondback was manufactured from 1966 to 1988 and was available in barrel lengths of 2½, 4, and 6 inches.

Native peoples were forced to gather ivory and transport it for export. Beginning c. 1890, rubber—originally manufactured from coagulated sap—became economically significant in international trade. The Congo was rich in rubber-producing vines, and Leopold transitioned his exploitative focus from dwindling ivory supplies to the burgeoning rubber market.

Panasonic TR-005 Orbitel (also known as the "Flying Saucer" or "The Eyeball" due to its shape) was a television set that was manufactured from the late 1960s to early 1970s by Panasonic. It had a five-inch screen, earphone jack, and could rotate 180 degrees on its chrome tripod.

Pavers come in a number of styles, shapes and tones. Pavers manufactured from concrete go well with flag, brick and concrete walkways or patios. If you reside in climates wherever winter temperatures dip below zero, concrete pavers are an honest selection. They are ready to stoppage well in extreme temperatures.

Tent pegs may be manufactured from steel rod or wire, pressed flat steel, aluminium section, titanium alloy, angle iron, plastic, polycarbonate, polypropylene, polystyrene, or ABS plastic. Steel tent pegs are typically zinc plated or stainless steel. Untreated metal tent pegs are available. Carbon fibre metal tipped tent pegs are also manufactured.

The vehicle in the video was a BMW E28 5 Series, manufactured from 1982 to 1988."The Scientist" at wikicoldplay.com he gets in and briefly passes out. A woman, at first shown lying unresponsive on the ground in front of the car, is shown flying back in through the shattered windscreen.

The city proper located on the right bank of the Guadalquivir and the Madrid- Córdoba railway. In the past, Andújar was widely known for its porous earthenware jars, called alcarrazas or botijos, which keep water cool in the hottest weather, and were manufactured from a whitish clay found in the neighbourhood.

The Empire was an American automobile manufactured from 1901 until 1902. A product of Sterling, Illinois, it featured a vee-twin Steam engine geared to its right-hand rear wheel. It had a rectangular, transverse mounted boiler with horizontal tubes across the chassis. Coachwork was of the motor buggy style.

A 1976–1980 Scout II Traveler Scout IIs were manufactured from April 1971 to 1980. The design was frozen much earlier, with a version nearly identical to the production model shown to management in December 1967.Crismon, p. 399 The Scout II is most identifiable by its different front grilles.

Hubley produced a wide range of airplanes, often reproducing actual military aircraft with good detail. Like the automobiles, Hubley aircraft were manufactured from multiple pieces which were usually put together with Solid Rivets. They had moving wheels and guns, and sometimes retractable landing gear. The wheels were often manufactured of rubber.

Each pull of the trigger first cocks then releases the hammer. The hammer follows the slide after each shot and rests in the down position. The original Seecamp model was the LWS-25 chambered in .25 ACP and manufactured from 1981 through 1985, with a total production of about 5000 units.

An AEC Regent double decker bus model in the Trux line. Top Gear's model buses and trucks are marketed under the Trux name. These are buses, trucks, fire engines and construction vehicles made for Australian roads or with Australian liveries. Many of these models are manufactured from dies directly commissioned by Trax.

The Jeecy-Vea was a Belgian automobile manufactured from 1925 until 1926 by a company more famous for its motor cycles. A limited-production light car, it was manufactured by a motorcycle factory in Brussels, and featured a 750 cc Coventry-Climax flat-twin engine. Tourer and coupé bodied versions were advertised.

The BSA B40 was a series of unit construction single-cylinder OHV four-stroke motorcycles made by the Birmingham Small Arms Company. Developed from the BSA C15, the machines were produced between 1961 and 1967 for civilian use. Military versions were manufactured from 1967 to 1970. Around 14,000 machines were built in total.

The Messrs. Fowlds, at Hastings, also manufactured from two to three million feet of sawn lumber annually ... which at Port Hope was worth $12 per 1000 feet.Poole, p. 95. It originally had a foundry, a cotton factory, grist mills, a stone Roman Catholic Church, Church of England and Presbyterian and Methodist Churches.

The Davis Totem was an American automobile manufactured from 1921 until 1922. As many as ten were built; they boasted friction drive similar to that found in their contemporaries, the Kelsey and the Metz. The cars used four-cylinder Herschell-Spillman engines. The touring car, which seated five, was listed at $1695.

Speed Queen Boats were manufactured from 1953 to 1962. The first model was designed by company founder William J. Horvath. Fourteen feet in length, the first model was a centerdeck-style, all fiberglass runabout that could accept outboard motors up to . Additional sixteen and eighteen-foot models were added in 1958 and 1959.

Audi was the first to use next-generation 10% BTL biodiesel developed by Shell and manufactured from biomass. Beginning in 2009, new regulations allowed hybrid vehicles, with either KERS or TERS (Kinetic/Thermal Energy Recovery System) setups. But only electrical (i.e., batteries) energy storage was allowed, ruling out flywheel-based energy recovery.

Dimensions, manufacturing conventions, and special fabrication instructions should be included on the shop drawing. It should be clear to fabrication personnel what will be manufactured from the shop drawings alone. The construction documents are rarely used as a reference in fabrication, with the fabricators relying on the shop drawing for all information.

The Buffalo was a United States automobile manufactured from 1900 until 1902, by the Buffalo Automobile and Auto-Bi Company of Buffalo, New York. Two models were made, the Junior with a 3.5 hp, and the Senior with 6 hp single-cylinder engines. The company also produced an "Auto.Bi", a two-wheeled motorcycle.

The James Superlux Autocycle was manufactured from 1950–1953. The engine was a single speed Villiers Mk 2F with 98cc displacement at . The frame was a single tube rigid type, front fork was like that of the Deluxe. Tyres were 21 x 2.35 inches, rims were the colour the same as the Deluxe.

The Lambert Automobile Company was initially the second factory plant for the Union Automobile Company of Union City, Ohio built in 1904. The name changed officially in 1905 to the Lambert Automobile Company and the Union Automobile Company name was dropped. A better quality automobile was then manufactured from the Union automobile.Dolnar, pp.

It is available in many different patterns, colors, and textures. There are three types of bamboo flooring construction: horizontal cut, vertical cut, and strand woven. Strand woven is the hardest and most durable of the three types. Cork flooring is a flooring material manufactured from the by-product of the cork oak tree.

Nails went from being rare and precious to being a cheap mass- produced commodity. Today almost all nails are manufactured from wire, but the term "wire nail" has come to refer to smaller nails, often available in a wider, more precise range of gauges than is typical for larger common and finish nails.

Larven Larven "Caterpillar" was a Swedish snowmobile that was manufactured from the 1960s to the 1980s in Östersund. The rider had to wear skis as well. This was for steering the vehicle, since the machine itself only provided propulsion. The design was easy to stow in a car due its small size.

All three stages of the BA-2 vehicle were to be pressure- fed using high-pressure helium storage to replace the expense and complexity of turbopumps. All of the BA-2 propellant tanks and primary structures were to be manufactured from lightweight composite materials. The engines were self- cooled with ablative materials.

The Åtvidaberg was a Swedish automobile manufactured from 1910 to 1911. Åtvidabergs Vagnfabrik AB began by importing an American Holsman High wheeler and using it as a pattern. The car used a flat-twin engine; its top speed was about 45 km/h (28 mph). Some of the later engines had four cylinders.

The Military Technical Museum Lešany is a museum of military vehicles located in the Czech Republic, about 20 kilometers south of Prague. Its exposition contains over 700The official museum website (Czech) historic tanks, cannons, motorcycles, armored vehicles, trucks, military passenger vehicles, missile systems and other military equipment manufactured from 1890 to the present.

All versions of the Tiburon manufactured from 1996 to 2002 are known as "RD" Tiburons. The MacPherson strut suspension was co-developed with Porsche. Its appearance was a revival of coke bottle styling, popular during the 1960s and 1970s. There were various options, with or without ABS, 2 airbags, leather, and sunroof.

The Triumph Super 7 was a car manufactured from 1927 to 1934 by the Triumph Motor Company. It was produced as a response to the success of the Austin 7 and was Triumph's first car to be made in large numbers. In 1933 the name was changed to the Triumph Super 8\.

Ampex 2 inch helical VTRs were manufactured from 1963 to 1970. Model VR-1500 for home. The VR-660 for Broadcast television systems, industrial companies, educational institutions, and a few for In-flight entertainment. The VR-1500 and VR-660 found service at educational institutions especially due to their relatively low cost vs.

The aircraft was a sesquiwing type of biplane with its fuselage frame manufactured from thin-walled steel tubing. The wings had spruce spars. The aircraft had two tandem open cockpits with the pilot in the aft cockpit and two passengers in the forward cockpit. Ailerons were installed on the upper wings only.

In Venezuela, the second generation was manufactured from 1992 to 1995 under the name of Mitsubishi Montero, it was available in long and short wheel base. From 1996 to 2009 its name was changed to Mitsubishi Montero Dakar, it was only available in short wheel base with 6G72 engine and manual five-speed transmission.

Tejas is constructed of aluminium-lithium alloys, carbon-fibre composites, and titanium alloys. Composite materials make up 45% of the airframe by weight and 95% by surface area. Upper and lower wing skins are manufactured from a single piece of carbon-fibre reinforced polymer. Wing spars and ribs are also made out of carbon composites.

Oaris bodyshells was manufactured from aluminium. The driving end cars have long, middle cars long, an 8-car set is long. The train is fitted with motors, giving a total power of in the 4-car, in the 6-car, and in the 8-car configuration. Design speed is , the service top speed is .

The Maya also produced texts painted on a form of paper manufactured from processed tree-bark generally now known by its Nahuatl-language name amatl used to produce codices.Miller and Taube 1993, p. 131.Tobin 2001. The skill and knowledge of Maya writing persisted among segments of the population right up to the Spanish conquest.

The clarinet uses a single reed made from the cane of Arundo donax, a type of grass. Reeds may also be manufactured from synthetic materials. The ligature fastens the reed to the mouthpiece. When air is blown through the opening between the reed and the mouthpiece facing, the reed vibrates and produces the clarinet's sound.

The Peugeot-Croizat was an Italian automobile manufactured from 1906 until 1908. The automobiles were produced by Vittorio Croizat in Turin. Croizat was an engineer/inventor who invested in oil refining, invented lighting systems, and sold Rambler bicycles. On December 27, 1905, he founded the company Automobili Peugeot SA Brevetti for the production of automobiles.

In Canada, maple sugar is one of several maple products manufactured from maple sap or maple syrup, including maple butter and maple taffy. Under the Food and Drugs Act and Consumer Packaging and Labelling Act, Canadian regulations require that maple sugar products identify the business identity and country of origin on the retail product label.

In helicopters, typical structural components like beams, sandwich structures, frames, and panels are manufactured using 3D braided profiles. Similarly, 3D fabrics are used to manufacture complex beam structures and floor panels in passenger cars. For train structures, different components manufactured from 3D braided profiles include the roof panel, interior components, side panels, and body structures.

Microspheres are small spherical particles, with diameters in the micrometer range (typically 1 μm to 1000 μm (1 mm)). Microspheres are sometimes referred to as spherical microparticles. In general microspheres are solid or hollow and do not have a fluid inside, as opposed to microcapsules. Microspheres can be manufactured from various natural and synthetic materials.

234/4, which replaced the L/24 gun with the 7.5 cm L/46 PaK 40. This was yet another attempt to increase the mobility of this anti-tank gun; however, the 234 chassis was stretched to its limits. This variant was manufactured from the end of 1944 to the end of hostilities in 1945.

The Skene was an American automobile manufactured from 1900 to 1901. A twin- cylinder 5 hp steam car, it was built in Lewiston, Maine. Despite its makers claims of "many points of superiority", the Skene seems to have been rather unremarkable. The Skene American Automobile Company was a short-lived maker of steam automobiles.

It consisted of triple distilled water containing at a minimum each of the radium-226 and radium-228 isotopes. Radithor was manufactured from 1918 to 1928 by the Bailey Radium Laboratories, Inc., of East Orange, New Jersey. The head of the laboratories was listed as Dr. William J. A. Bailey, not a medical doctor.

Adamopoulos and Mai (2011) modified recycled fibres with N-methylol compounds and glutaraldehyde with significant improvement on fibre characteristics and paper sheet performance.Adamopoulos and Mai (2011). Laboratory sheets manufactured with a variety of chemically modified recycled fibres were found to be superior in stiffness and hygroscopic properties than these manufactured from unmodified ones.Adamopoulos et al.

This model was manufactured from 1976 to 1982 and was Star's flagship. It was very much like the Synare 1, with one oscillator providing sawtooth, pulse, or white noise. It added assignable functions, such as the ability to route the LFO in order to simultaneously modulate several parameters. The LFO also provided a sawtooth waveform.

The Chota was a 6 hp English cyclecar manufactured from 1912 until 1913 by the Buckingham Engine Works of Coventry. Chota is Hindustani for "small". The car was designed by J. F. Buckingham and had a 746 cc single-cylinder engine of Buckingham's own design. A larger 1492 cc model was added in 1913.

The Remington Model 580, 581, and 582 are a family of bolt-action rifles, manufactured from 1967 to 1999. The rifles were introduced as a replacement for the previous Model 511. The 580 series was a lower-cost rifle patterned after the contemporary Model 788 centerfire rifle and shares that rifle's rear-locking bolt.

67–68 a patent medicine preventative and treatment for malaria. The pills were filled with quinine, which Sappington manufactured from ground cinchona bark imported from Peru. He developed wide distribution of the pills, which became best sellers. Malaria was prevalent throughout the Missouri and Mississippi valleys, as were yellow fever, scarlet fever, and influenza.

Epichlorohydrin is traditionally manufactured from allyl chloride in two steps, beginning with the addition of hypochlorous acid, which affords a mixture of two isomeric alcohols: :320px In the second step, this mixture is treated with base to give the epoxide: :430px In this way, more than 800,000 tons (1997) of epichlorohydrin are produced annually.

In the Duchy of Courland and Semigallia Kandava became centre of Hauptmannshaft Candau. Kandava received village rights in 1625. During the reign of duke Jacob Kettler, several manufactures was established around Kandava. In the village there was a flax weaving mill and a gun powder mill where gunpowder was manufactured from local brimstone and saltpeter.

The FN M12 was a motorcycle manufactured from 1937 to 1940 by the Belgian company Fabrique Nationale de Herstal, primarily for use with a sidecar.Guy de Becker, Quand la F.N. avait deux roues, self-published, 1993, p. 151 . 1,180 were built, 1,090 of which were delivered to the Belgian military as heavy sidecar combinations.

Mold tools tend to be manufactured from steels (which can be hardened and plated), and aluminum alloys. The molds are controlled through a split via a channel system of gates and runners. EPS is colloquially called "styrofoam" in the United States and Canada, an incorrectly applied genericization of Dow Chemical's brand of extruded polystyrene.

The Lada 111 or VAZ-2111 is AvtoVAZ's front wheel drive car with a station wagon bodystyle (modification of Lada 110). It was manufactured from 1998 to 2009. The vehicle is still manufactured in Cherkasy by Bogdan, marketed as the "Bogdan 2111", with only minor alterations.С декабря 2009 производство ВАЗ 2111 в Тольятти прекращено.

5hp Argyll Voiturette 1900Front of a 1908 Argyll 14 16 Argyll 8HP Rear- entrance tonneau 1902 Flying Fifteen by Argyll Facade of the Argyll Motor Works a Category A listed building in Alexandria, West Dunbartonshire, Scotland. Argyll was a Scottish motor car marque manufactured from 1899 to 1932, and again from 1976 to around 1990.

Postcard of right-hand drive Black Crow automobile, ca. 1910 by a Liberty Pennsylvania, photographer. Caption on reverse reads: "Walter Stroble at wheel in Liberty PA ca. 1910" Black Crow automobiles were manufactured from 1909-1911 by the Crow Motor Car Company in Elkhart, Indiana, and sold by the Black Motor Company .Cruise-IN.

The pontoons are manufactured from high tension steel and they are atmospheric corrosion- and saltwater-resistant. Each pontoon has 5 independent water tight compartment with maintenance hole. The bottoms of the pontoons are reinforced for rough terrain operation. The power for the pontoon tracks is provided by an excavator engine and main hydraulic pumps with traveling motors.

The T was called the "TraumQuickly",or "Dream Quickly". It had a unique frame, futuristic styling, a new leading link front fork with the front fender as a structural component, a three speed transmission, and a high-compression (6.8:1, at 5000 rpm) version of the Quickly's motor unit. 38,605 Quickly T mopeds were manufactured from 1959 to 1963.

The J-P Wimille was a French automobile manufactured from 1946 until 1950. Powered by a rear-mounted 22 hp Ford V-8, it was an aerodynamic saloon designed by racing driver Jean-Pierre Wimille. No more than 20 were built. Some of the cars appeared after Wimille's death in the 1953 film "Les amours finissent à l'aube".

In New Zealand smaller waka were made from a single log, often Totara, because of its lightness, strength and resistance to rotting. Larger waka were made of about seven parts lashed together with flax rope. All waka are characterized by very low freeboard. In Hawaii, waa (canoes) are traditionally manufactured from the trunk of the koa tree.

The ceilings were painted with a fresco and gilded, while the railings were manufactured from brass. There were Greek statues and busts carved in wall niches, while the restrooms and waiting rooms were grandiose in style in comparison to cathedrals at the time. The highlight of the decor was an enormous crystal chandelier in the main lobby.Paramount Theatre. Cinematreasures.org.

The stamps were manufactured from erasers. The plan also involved the support of two Rabbis, detainee David Kahane, and the Johannesburg Rabbi, Levi Rabinowitz, who smuggled in vital information. Having crawled to the other side of the fence, a ride was there to take them to the Uganda. From there, they made it to Belgian Congo.

Most early hard soaps were manufactured using animal fats and KOH extracted from wood ash; these were broadly solid. However, the majority of modern soaps are manufactured from polyunsaturated triglycerides such as vegetable oils. As in the triglycerides they are formed from the salts of these acids have weaker inter-molecular forces and thus lower melting points.

Laycock de Normanville overdrive unit He designed an epicyclic four-speed gearbox produced by Humber during the 1930s but is best known for his epicyclic overdrive manufactured from the 1940s by Sheffield's Laycock Engineering. His design made it possible to shift instantly from overdrive to direct drive and back again without a break in the drive.

44 Magnum Colt Anaconda in 1990. There are several generational variants including the "Old Model" (which refers to the first 21,000 units made),"Transitional Model" (which incorporated a hammer-block safety), "Improved Model" (325,000 units) and "Late Model" (manufactured from 1928 to 1941). A "Target Model", "Shooting Master" and "Deluxe Target Model" were offered as well.

A total of 14 of these four-car trainsets were manufactured from 1969–1972 by ANF. These trains were maintained at the Venissieux trainshed in Lyon for "many years", but were moved to the Lyon Vaise depot in the 1980s. Electrification of the Grenoble line caused some trainsets to be shifted to work in Clermont Ferrand and Metz.

TachoSil is a collagen sponge coated with the human coagulation factors fibrinogen and thrombin. It is used during surgery to stop local bleeding on internal organs (hemostasis). The sponge is manufactured from horse tendons. TachoSil reacts upon contact with blood, other body fluids or saline to form a clot that glues it to the tissue surface.

Changes in The New 52 continuity have left her as susceptible to sunlight as other vampires. In her earlier appearances, Looker is also a lucid dreamer.Detective Comics #604 Her original costume was manufactured from a material unique to Abyssia; "one way fabric", which was invisible from one side. This allowed her to keep her costume handy but not visible.

Then there is still another steam sauna, what has the characteristic to lies in the bath central and openly. The giant chute is manufactured from high-grade steel and it can see from the inside into the outside. It has also a water playground. From the interior may be swim also after outside; into the 32° warm external basin.

Salt manufactured from the springs at Kibero in western Bunyoro was distributed across Lake Albert by dugout canoes to populations in the Lendu area of the northeast Congo. Kibero salt was obtained from saliferous earths. There was a series of excavations done in the small village of Kibiro by archaeologist Graham Connah. Connah first excavated Kibiro in 1989.

At Christmas, the product is advertised with the slogan "Christmas wouldn't be Christmas without the Paxo" (a play on the phrase "Christmas wouldn't be Christmas without the turkey"). Paxo was manufactured from the early 1950s in Sharston, Manchester, until 2009 when the factory was closed and production moved to the re-opened Bachelor's factory in Ashford, Kent.

In 1994, he moved to Intel, becoming senior Vice President and general manager for Ireland. He helped Intel build the Fab 14 plant. By the time of his retirement in 1990, 30% of all Pentium chips worldwide were manufactured from the Irish plant. He was responsible for the acquisition of his former company, Digital Equipment Corporation's semiconductor business.

The Rába was a Hungarian automobile manufactured from 1912 to 1914. Rába automobile was a subsidiary of the Rába (company) in Győr. A product of the Rába company in the city of Győr, the engine of the car was the 4.2-liter 58 hp (44 kW) Praga "Grand". The car was built in limited numbers, under the Praga license.

This is the main production variant; the others stem off of this design with slight body differences. However the internal mechanisms are the same. SDASS stands for Special Defence And Security Shotgun and is aimed for security personnel. The receiver is manufactured from Ergal 55 alloy which makes for a lightweight shotgun at only 3 kg.

Log furniture can be manufactured from almost any type of wood as long as the timbers that are used have adequate dimensions and strength. Some of the most popular types of wood include aspen, steam-bent hickory, pine, aromatic red cedar, northern white cedar, walnut, and willow. Some log furniture is made from exotic woods such as osage orange.

It compiles stills from the film, accounts of events and viewer reactions, and an image of the brick that was manufactured from the fire's ashes. A film consisting of a three-minute shot of the brick - "This Brick" - was shown at London's Barbican Centre prior to Drummond and Cauty's performance as 2K in the same year.

This was the original version of the 415 series train, and was manufactured from 1971 to 1974, and had air-conditioners installed in 1977. The Jōban Line and Mito Line trains were withdrawn in March 2007 in favour of the new E531 series trains, but 415-0 series were still in operation with JR Kyushu as of January 2013.

Instruments and Experimental Techniques, 34(4), 750-762. In the case of liquid-liquid experiments where the compression is performed at the interface of a polar liquid such as water and a dispersive liquid such as oil, the trough is commonly manufactured from POM (polyoxymethylene). POM is more hydrophilic and aids in keeping the liquid- liquid interphase stable.

In this method, the probe is manufactured from a long metal channel which ends in a well for holding a sample capillary. The probe is inserted into the source block through a vacuum lock. The sample is introduced to the well using a glass capillary. Next the probe is quickly heated to the desired temperature to vaporize the sample.

Originally intended to be amateur- constructed from four sheets of plywood, the boat was also commercially manufactured from fiberglass. The design was built by Johannsen Boat Works, Lockley Newport Boats and Advance Sailboat Corp. in the United States, but it is now out of production. A total of 5700 examples of the type have been completed.

Iris 15 HP (1912) The Iris was a British car brand that was manufactured from 1906 by Legros & Knowles Ltd in Willesden. Lucien Alphonse Legros (1866–1933), son of the artist Alphonse Legros, and Guy Knowles, scion of a wealthy and artistic family, founded Legros & Knowles Ltd in Cumberland Park, Willesden Junction, in 1904 to build and repair vehicles.

A 1910 Empire 20 "B" model on display at the Central Texas Museum of Automotive History. The Empire was an American automobile manufactured from 1910 until 1919. Marketed as "the little aristocrat", the Empire 20 was a four-cylinder shaft-driven runabout built in Indianapolis. The model "A" was a conventional runabout for three passengers with a rumble seat.

It could be manufactured from renewable energy sources, as well as coal or nuclear power. The 60 MW Rjukan dam in Telemark, Norway produced ammonia for many years from 1913, providing fertilizer for much of Europe. Despite this, several tests have been done. In 1981, a Canadian company converted a 1981 Chevrolet Impala to operate using ammonia as fuel.

The Reliant Kitten is a small four-wheeled economy car which was manufactured from 1975 to 1982 in saloon, van and estate variants by the Reliant Motor Company in Tamworth, England. It was the company's fourth four-wheeled car to reach production, following the Reliant Sabre of 1961 and Reliant Rebel and Reliant Scimitar of 1964.

Bristle coir is the longest variety of coir fibre. It is manufactured from retted coconut husks through a process called defibering. The coir fibre thus extracted is then combed using steel combs to make the fibre clean and to remove short fibres. Bristle coir fibre is used as bristles in brushes for domestic and industrial applications.

The BM 59 is capable of selective fire. The BM 59 was adopted in 1959 and served with Italian, Argentinian, Indonesian, and Moroccan armies. In the early 1980s, semi- automatic versions were imported to the United States and sold to private collectors. The earliest BM 59s were manufactured from U.S.-manufactured M1 parts, including re-chambered barrels.

It can be a less expensive option than buying hardwood, but it cannot be sanded and refinished. This flooring typically is installed with a click-lock method. Bamboo flooring is a floor manufactured from the bamboo plant and is a type of hardwood flooring, though technically not a wood. Bamboo is known to be durable and environmentally friendly.

The Vice Presidential Suite featured a dining room with furniture in the Sheraton and Hepplewhite styles. Dining room furniture in both suites was manufactured from satin-walnut, and featured painted decorations and marquetry. The bedrooms in both suites featured Louis XVI-, Adam-, and Federal-style furniture made of satinwood, walnut, and mahogany. Each piece was painted, lacquered, or marquetried.

Biofuels are fuels, such as ethanol, manufactured from various types of biomass, such as corn or sugar beet. Biofuels are usually liquid and used to power transport, often blended with liquid fossil fuels such as gasoline, diesel or kerosene. The sustainability of biofuels is under debate. Cellulosic ethanol has many benefits over traditional corn based-ethanol.

The Nikkormat FS, manufactured from 1965 to 1971, was an FT stripped of the built-in light meter with its exposure information system and the mirror lockup feature. The FS was unpopular when new because of the lack of a built-in meter, but this makes it rarer and more valuable than the FTs to collectors today.

The American Chocolate later known as Walter was an American-assembled automobile. Manufactured from 1902 to 1906 by vending machine company the American Chocolate Machinery Co., in Manhattan, New York, owned by William Walter. He decided to expand his business by assembling automobiles in his factory. The cars were exhibited at the New York automobile show.

The Nissan Quest is a minivan that was manufactured from 1992 until 2017 by Nissan. The first two generations of the Quest were a joint venture with Ford, which marketed a rebadged variant as the Mercury Villager. The vans debuted at the 1992 North American International Auto Show in Detroit. However, it is still sold in Japan.

Lactylates are also widely used in non-food applications such as cosmetics or personal care products. In these applications, lactylates function as emulsifiers, conditioners, foam boosters, or plasticizers. These lactylates are typically manufactured from behenic acid, isostearic acid, or medium-chain fatty acids such as capric acid, lauric acid, and myristic acid. The lactylates may also be partially neutralized.

The South Newfane Bridge is a historic bridge, carrying Parish Hill Road across the Rock River in the village of South Newfane, Vermont. It is a Pratt through truss span, manufactured from rolled I-beams in 1939 to replace a bridge washed away in flooding. It was listed on the National Register of Historic Places in 1992.

For example, the Commodore 64 (manufactured from 1982) had only the "Return" key. Most laptop computers continue in this combined tradition. Before computers, on electric typewriters the "Return" key was kept comparatively large. This is due to the frequency of usage (which also includes the space bar), and therefore, is kept large to reduce the likelihood of finger slips.

The Argonne was an American automobile manufactured from 1919 to 1920 by the Jersey City Machine Co. of Jersey City, New Jersey. Only 24 were produced before the company folded. The prototype car was a sports roadster with an aluminum body crafted by the Schutte Body Co. of Lancaster, Pennsylvania. It was powered by an inline-four Buda engine.

Senior Ferdinand Porsche took Daimler's place as technical designer. Although Austro-Daimler cars were competing at races already, Porsche pioneered aerodynamic usage with two famous racecars (Mixte and Maya). Also, he designed the Mercédès-Electrique-Mixte which was manufactured from 1902 until 1907. Porsche also impelled a company reformation, at a time when the company had 800 workers.

Neera manufactured from Kollam Kaippuzha Plant, 2016 Neera, also called palm nectar, is a sap extracted from the inflorescence of various species of toddy palms and used as a drink. Neera extraction is generally performed before sunrise. It is sweet, translucent in colour. It is susceptible to natural fermentation at ambient temperature within a few hours of extraction.

A recyclable bag manufactured from polyethylene. Polyethylene is produced from ethylene, and although ethylene can be produced from renewable resources, it is mainly obtained from petroleum or natural gas. Moreover, the widespread usage of polyethylene poses difficulties for waste management if it is not recycled. Polyethylene, like other synthetic plastics, is not readily biodegradable, and thus accumulates in landfills.

A prosthetic testicle is an artificial replacement for a testicle lost through surgery or injury. Consisting of a plastic ovoid manufactured from silicone rubber filled with a salt solution and implanted in the scrotum, a prosthetic testicle provides the appearance and feel of a testis and prevents scrotum shrinkage. It is commonly used in female-to-male sex reassignment surgery.

Flanged drills are the most typical drill in prehistoric sites. They were most likely manufactured from a flake blank and were handheld. The modified flakes were probably used as a hafted tool and had steep edge retouch. The modified flakes were the only one to demonstrate drill wear in that rings are noticeable on the drills with actual use as a drill.

An AX-7 The Roland AX-7 was manufactured from 2001 to 2007. This modern instrument contains many more advanced features than early keytars such as its predecessor, the Roland AX-1, and the Yamaha SHS-10. It runs on 6 AA batteries or an external power source. It has a 45 velocity sensitive keys (without aftertouch), and a 3-character LED display.

St. James is the headquarters of the Trinidadian-based soft- drink company Solo. During the 1970s, this company was located at the corner of Western Main Road and Long Circular Road. The operations of this company were moved close to Aranguez, where the soft drinks are currently manufactured. From the Highway, the factory is visible if one is heading towards the Piarco airport.

Two films were adapted from Greene’s novel: The 1934 Orient Express and the BBC TV adaptation 1962 Stamboul Train.BFI The author was dismissive of both. "This film manufactured from my book came last and was far and away the worst [of several others on the same theme], although not so bad as a later television production by the BBC."Ways Of Escape, p.

This mine contains the largest group of foundations including crusher and winch mounts. A beam pump arm is located at the collar of the main shaft. Further south, at the Hampden No. 3 shaft, remains include a headframe, winder house, waste heaps and boiler on a brick mounting. The bricks are manufactured from slag demonstrating an innovative and rare use of recycled slag.

It is alleged that Highs knew the jenny's limitations. It could produce only thread that was suitable for weft. Its output was too soft to be used for warp, which still had to be manufactured from linen. While Hargreaves worked on the spinning jenny, Highs, it is alleged, constructed a machine using rollers, similar to a machine later called the water frame.

Historically it was mined from deposits associated with dunites in North Carolina, US and from a nepheline syenite in Craigmont, Ontario. Emery- grade corundum is found on the Greek island of Naxos and near Peekskill, New York, US. Abrasive corundum is synthetically manufactured from bauxite. Four corundum axes dating back to 2500 BCE from the Liangzhou culture have been discovered in China.

Symbols would be placed on the doors of houses to bring good luck or deter misfortune for the occupants within. Charms, often cut in precious or semi-precious stone, had protective power. Figurines, manufactured from bronze, lead, or terracotta, were pierced with pins or nails, and used to cast spells. Curse tablets made from marble or metal (especially lead) were used for curses.

The Eysink was a Dutch automobile manufactured from 1903 until 1919. The Eysink brothers from Amersfoort, who created the marque, started out manufacturing bicycles. In 1897 they built their first automobile. However, the brothers did not begin production in earnest until 1903 (although they produced about 10 cars in this period) when they built a range of shaft-driven motor cars.

All generations of C8 come equipped with double wishbone suspension at the front and rear axles. First generation C8 models used inboard Koni shock absorbers and components constructed from stainless steel and aluminum. Aileron and Preliator models adopted an updated suspension setup developed by Lotus, with an increase number of parts manufactured from forged aluminum and new mono-tube dampers.

A Čezeta 502 (1960) Čezeta 502 with Druzeta sidecar A Čezeta 505 The Čezeta is a motor scooter originally manufactured from 1957 to 1964 in the Czechoslovak Socialist Republic, (now the Czech Republic), by the Česká zbrojovka Strakonice (ČZ) company, which manufactured motorcycles from 1935 to 1997. Production resumed in 2017 with the introduction of a limited-edition electric-powered Type 506.

Clean energy bio-ethanol cooking fuel in Kenya has been pioneered by International Research & Development Africa Ltd with a BIOMOTO Cook stove. Bio-ethanol fuel is manufactured from food crop stover and post harvest, contaminated and damaged starch crops purchased from bottom of pyramid farmers. Another initiative is Project Gaia. Alcohol fuels, such as ethanol, burn quickly, cleanly and are renewable.

Share of the Automobiles Impéria SA, issued 22. April 1926 Imperia TA-9 BS 1938 Imperia TA-8 Sport Standard Vanguard convertible built by Imperia Impéria was a Belgian automobile manufactured from 1906 until 1948. Products of the Ateliers Piedboeuf of Liège, the first cars were designed by the German Paul Henze. These were four- cylinders of 3, 4.9, and 9.9 litres.

By laminating a number of smaller pieces of lumber, a single large, strong, structural member is manufactured from smaller pieces. These structural members are used as vertical columns, horizontal beams, and arches. Glulam is readily produced in curved shapes and is available in a range of species and appearances. Connections are usually made with bolts or steel dowels and steel plates.

The Keystone Steamer was an American automobile manufactured from 1899 until 1900 in Lebanon, Pennsylvania.David Burgess Wise, The New Illustrated Encyclopedia of Automobiles The manufacturer was the Keystone Match & Machine Company, founded in 1894 and offering bicycles from 1896.Kimes, Beverly Rae (editor) and Clark, Henry Austin, jr., ; The Standard Catalogue of American Cars, 2nd Edition, Krause Publications, Iola WI 54990 (1985), ; p.

The Smith & Wesson G-series pistols were designed with attention to accuracy and weight, making them ideal in developing short-range marksmanship skills while using a less- penetrating, air-driven pellet as the projectile. They were designed to imitate the Smith & Wesson Model 41 target pistol. Both models are equipped with target style adjustable sights. These airguns were manufactured from 1970 to 1978.

Other researchers have been successful using carbon paper manufactured from pyrolyzed filter paper. The paper is inserted in between the electrode and cathode. The use of a carbon paper as an interlayer in Li-S batteries improves the batteries efficiency and capacity. The carbon paper increases the contact area between the cathode and the electrode which allows for greater flow of electrons.

The Ferrari version of the engine has a flatplane crankshaft and dry sump lubrication. In order to obtain equal length pipes, the exhaust manifolds are manufactured from multiple welded cast steel pieces; the turbocharger housing uses a similar three-piece construction. The Maserati version has a crossplane crankshaft and wet sump lubrication. Turbine housings and exhaust manifolds are integrated in a single piece.

The Warszawa was a Polish automobile manufactured from 1951 to 1973 by the FSO Passenger Automobile Factory in Warsaw. 1957 Warszawa M20 (200) The Warszawa was the first newly designed Polish car built after the Second World War. Warszawas were popular as taxis because of their sturdiness and ruggedness. However, they were underpowered for their weight and had high fuel consumption.

Gobron-Brillié Emblem Gobron-Brillié was an early French automobile manufactured from 1898 to 1930.P. Roberts (1973). A Picture History of the Automobile, Ward Lock Ltd, London, UK. The original company, Societé des Moteurs Gobron-Brillié, was founded by the French engineer, Eugène Brillié, and industrialist, Gustave Gobron, at 13, quai de Boulougne, Boulougne-sur- Seine, near Paris, in 1898.

Roanoke Gas Company was organized in 1883, one year after Roanoke became a city. Initially, the gas was primarily used for street lights and to light businesses such as the Hotel Roanoke. Gas was manufactured from coal with coke as a byproduct. In 1889, the Roanoke Gas Company and the Roanoke Water Works sold their assets to the Roanoke Gas and Water Company.

Musée Automobile Reims Champagne The Michel Irat was a French automobile manufactured from 1929 until 1930 in Paris. Georges Irat bought the Chaigneau- Brasier company and changed its name to that of his son Michel. Production continued of the old models which used a side valve 1086 cc four-cylinder engine. In 1930 Georges Irat combined the company with his own larger operation.

All variants were in diameter and long, weighing . The W50 used the Tsetse primary design for its first fission stage, along with several mid and late 1950s designs. The W50 is thought to have been the source of the W78 warhead's fusion second stage design. The W50 was manufactured from 1963 through 1965, with a total of 280 being produced.

Condensers can be air-cooled, water-cooled, or evaporative. The condenser is a heat exchanger which allows heat to migrate from the refrigerant gas to either water or air. Air cooled condenser are manufactured from copper tubes (for the refrigerant flow) and aluminium fins (for the air flow). Each condenser has a different material cost and they vary in terms of efficiency.

A limited edition of the force feedback wheel included the racing game Project Gotham Racing 3. There is also a "Hardcore Pack" for Test Drive Unlimited which makes the driving more realistic. On August 22, 2007 Microsoft published a press release on Xbox.com saying that they will retrofit all the Wireless Racing Wheels for free that were manufactured from 2006 to 2007.

The Colt M1878 is a double-action revolver that was manufactured by Colt's Manufacturing Company from 1878 to 1907. It is often referred to as the "Frontier" or the "Double Action Army" revolver. A total of 51,210 Model 1878 revolvers were manufactured from 1878 to 1907, including 4,600 for the US Ordnance Department. These are known as the "Philippine" or "Alaskan" models.

The husk and shells can be used for fuel and are a source of charcoal. Activated carbon manufactured from coconut shell is considered extremely effective for the removal of impurities. The coconut's obscure origin in foreign lands led to the notion of using cups made from the shell to neutralise poisoned drinks. The cups were frequently engraved and decorated with precious metals.

The basis weights of the cup boards are 170–350 g/m2. To meet hygiene requirements, paper cups are generally manufactured from virgin (non-recycled) materials. The one exception to this is when the paper cup features an extra insulating layer for heat retention, which never comes into contact with the beverage, such as a corrugated layer wrapped around a single-wall cup.

It would be made quickly and be easily repaired. Terry's further innovations included the design of an escapement with removable verge. This later became a standard design feature of American clocks for the following century. The mass-produced wooden clocks manufactured from interchangeable parts that poured from Terry's factory beginning in 1814 were the world's first mass-produced machines made of interchangeable parts.

They are informally called birdcage pianos because of their prominent damper mechanism. The oblique upright, popularized in France by Roller & Blanchet during the late 1820s, was diagonally strung throughout its compass. The tiny spinet upright was manufactured from the mid-1930s until recent times. The low position of the hammers required the use of a "drop action" to preserve a reasonable keyboard height.

The process of using Bakelite did not permit the production of bright colors. The device was manufactured from 1933 in a smaller format, and from 1947 redesigned with softer, more rounded edges as the model designated M50. It was also offered in white melamine. The metal dial rotor was replaced with a plastic version, and a spiral cord became standard.

1973 Stutz Blackhawk of Elvis Presley :For the 1928 Stutz land speed record car, see Stutz Black Hawk Special. The Stutz Blackhawk is an American ultra- luxury car manufactured from 1971 through 1987. Other than the name it bears no resemblance to the original Blackhawk (1929-1930). The Stutz Motor Company was revived in August 1968 by New York banker James O'Donnell.

2,4-D is a member of the phenoxy family of herbicides. 2,4-D is manufactured from chloroacetic acid and 2,4-dichlorophenol, which is itself produced by chlorination of phenol. Alternatively, it is produced by the chlorination of phenoxyacetic acid. The production processes may create several contaminants including di-, tri-, and tetrachlorodibenzo-p-dioxin isomers and N-nitrosamines, as well as monochlorophenol.

When bound to coenzyme A, it is central to the metabolism of carbohydrates and fats. The global demand for acetic acid is about 6.5 million metric tons per year (Mt/a), of which approximately 1.5 Mt/a is met by recycling; the remainder is manufactured from methanol. Vinegar is mostly dilute acetic acid, often produced by fermentation and subsequent oxidation of ethanol.

The Nikkormat ELW, manufactured from 1976 to 1977, was an EL modified to accept the Nikon AW-1 autowinder, providing motorized film advance at up to two frames per second. The ELW also expanded the automatic shutter speed range to eight seconds, and its viewfinder was fitted with a new standard focusing screen, the Type K (see the Nikkormat FT2 above).

Later, Nikon again pioneered the use of titanium for vertical shutters, using a special honeycomb pattern on the blades to reduce their weight and achieve world-record speeds in 1982 of second for non-sync shooting, and with x-sync. Nowadays most such shutters are manufactured from cheaper aluminium (though some high-end cameras use materials such as carbon-fibre and Kevlar).

In addition to describing women's one-piece swimsuits, the word maillot has also been used to refer to tights or leotards made of stretchable, jersey fabric, generally used for dance or gymnastics. The term maillot was first used to describe tight-fitting, one-piece swimsuits in the 1920s, as these swimsuits had been manufactured from a similar stretchable, jersey fabric.

The Kawasaki Z750 twin is a twin-cylinder, touring motorcycle announced in 1975 and manufactured from 1976 to 1978. It was based on the smaller Kawasaki KZ400 introduced in 1975. The air cooled engine shared similar engine design with the KZ400 having chain-driven twin dynamic balancer shafts. The valve seats were hardened to allow use of low-grade fuel.

Flexaret Automat Flexaret is a brand of cameras manufactured from 1939 to 1970 in Czechoslovakia by the company Meopta. All models of Flexaret are twin-lens reflex cameras with aluminum body, taking square "6×6" format photographs on a 120 roll film. Some models were also capable of working with 35 mm film with the help of a special adapter.

Trichinopoly cigar, also called Trichies or Tritchies, is a type of cheroot associated with the town of Tiruchirappalli in Tamil Nadu, India. The Trichinopoly cigar was actually manufactured from tobacco grown near the town of Dindigul near the present-day Tiruchirappalli and formed one of India's main items of export during the Victorian period. The cigars were cheap and of crude manufacture.

The Honda TRX 700XX is an ATV (All Terrain Vehicle) or quad bike. The Honda 700XX is Honda's first generation of the 700XX and is powered by a single cylinder, 4 valve, electronically injected fuel engine (approximately 53 hp), with electric start and a 5-speed manual transmission with a 1-speed reverse. Top speed approximately 86 MPH. Manufactured from 2008–2009.

The Brewster Site is an archaeological site associated with a village of the Mill Creek culture near Cherokee, Iowa, United States. Among the items found here are ceremonial or decorative items manufactured from birds. Pottery that has been tempered with crushed granite, sand, and pulverized clamshell has also been found. The site was listed on the National Register of Historic Places in 1979.

Glass is a material being specified in the Standard Methods 5210 of the BOD5 test. The glass bottles are manufactured from Type 1 borosilicate glass. ;A black BOD bottle A black BOD bottle is coated with PVC plastic that block visible light. The black bottle is used in marine photosynthesis projects which needs the comparison of oxygen in the light and dark condition.

Enerkem is a Montreal-based cleantech company. Founded in 2000, the Enerkem technology converts pretreated municipal solid waste into transportation fuels and chemicals. Manufactured from waste biomass, instead of fossil sources like petroleum and natural gas, Enerkem's technology produces ethanol and renewable chemicals that are used in a broad range of industrial and consumer applications. Enerkem owns an innovation centre in Westbury.

Common factors are size, pressure rating, weight, length, straight hose or coilhose, and chemical compatibility. Applications mostly use nylon, polyurethane, polyethylene, PVC, or synthetic or natural rubbers, based on the environment and pressure rating needed. In recent years, hoses can also be manufactured from special grades of polyethylene (LDPE and especially LLDPE). Other hose materials include PTFE (Teflon), stainless steel, and other metals.

The court found similar market- allocation conspiracies for milk bottles and fruit jars. Defendants Thatcher and Owens manufactured from 65 to 70% of all milk bottles produced in the United States.46 F. Supp. at 581. Defendant Ball Brothers manufactured substantially all the fruit jars in the United States except for annual quotas of 100,000 and 300,000 jars for defendants Owens and Hazel-Atlas.

The MKA 1919 barrel can be quickly removed from upper receiver. To charge the rifle, the charging handle on the receiver must be pulled. The upper receiver is manufactured from an aluminum alloy while the lower receiver, along with pistol grip and shoulder stock, is manufactured as one piece from impact-resistant polymer. Akdal MKA 1919 semi-automatic rifle has a 5-round detachable box magazine.

The locking bolt requires the safety to be in the "fire" or "off" position in order to rotate the handle and actuate the bolt. Rifles manufactured from 1975 to 1983 have non-locking bolts which can be actuated while the safety is engaged. The second distinguishing feature is the receiver. It has a smaller ejection port than similar bolt- action rifles, and no bolt lug raceways.

Also known as the Quickly F/23, the Quickly F essentially replaced the L at the top of the traditional Quickly line. It was similar in styling and appearance to the S2/23, but it had rear suspension combining the swingarm from the L with the tall spring/damper units from the Cavallino and TT. The Quickly F was manufactured from 1962 to 1963.

The Lake Station gas manufacturing plant on Lake Union was the largest private utility then existing in Seattle. It operated as "Seattle Lighting Company" until 1930, when the name was changed to "Seattle Gas Company". Its primary product was illuminating gas (so-called because it was used for lighting) manufactured from coal. The gas was later also used for cooking, refrigeration, and heating homes and water.

RPM synchronous motor for Teletype machine, non-excited rotor type, manufactured from 1930 to 1955. In non- excited motors, the rotor is made of steel. At synchronous speed it rotates in step with the rotating magnetic field of the stator, so it has an almost- constant magnetic field through it. The external stator field magnetizes the rotor, inducing the magnetic poles needed to turn it.

The EPS (Ensoniq Performance Sampler) was one of the first few affordable samplers on the market. It was manufactured from 1988 to 1991 by Ensoniq in Malvern, Pennsylvania, USA. The EPS was a 13 bit sampler and replaced the Mirage - widely regarded as the first truly affordable sampling keyboard. The EPS had a straightforward interface that was easy to use, with configurable controls geared for live performance.

However, the diabolo shape also means that the overall pellet will have poor ballistic coefficient and tends to lose energy quickly and be more unstable especially in the transonic region (272–408 m/s ~ 893–1340 ft/s). Diabolo pellets are traditionally made from lead, but can also be manufactured from tin, or a combination of materials such as steel or gold alloys with polymer tips.

A P9S with the slide locked back. The P9 is a roller-delayed pistol manufactured from a stamped steel main frame and a polymer trigger guard. The stamped steel slide contains machined internal parts including a polygonally rifled barrel. High-profile fixed sights are fitted with two red rectangles on the rear sight and a white stripe on the drift adjustable front blade sight.

Uncoupling is achieved by holding a magnetic wand over the coupler pair to draw the balls out of the locking pockets. In O scale, an exact-scale working miniature version of the "Alliance" coupler was manufactured from the 1980s by GAGO models in Australia. Since 2002 it has been marketed by the Waratah Model Railway Company. European modellers tend to use scale hook and chain couplings.

It is used as a scintillator and dosimeter for radiation protection and therapy applications for its optically stimulated luminescence properties. Insulation for high-temperature furnaces is often manufactured from aluminium oxide. Sometimes the insulation has varying percentages of silica depending on the temperature rating of the material. The insulation can be made in blanket, board, brick and loose fiber forms for various application requirements.

The John Deere 5220 is a utility/agricultural tractor produced by John Deere, designed for residential and farming use. Manufactured from 2000–2004, it has a 3-cylinder, engine which produces of torque at 2400 rpm. It was available in 2wd or Mechanical Front Wheel Drive (4wd) and has a rear hitch capacity of . Its operating platforms where IOOS (Isolated Operators Operating Section), Cab, and Straddle Mount.

It was powered by either an 85 hp or 95 hp Ford V8 engine. On to this was fitted an armoured body manufactured from ABP-3 (Australian Bullet Proof plate type 3) by Victorian Railways. Serial production began in early 1942. Dingo Scout Cars halt during a parade through Sydney in December 1942 The Dingo was equipped with a Bren light machine gun and Mk19 wireless.

Through the 1970s and 1980s, Japanese synthesizer manufacturers produced more affordable synthesizers than those produced in America, with synthesizers made by Yamaha Corporation, Roland Corporation, Korg, Kawai and other companies. Yamaha's DX7 was one of the first mass-market, relatively inexpensive synthesizer keyboards. The DX7 is an FM synthesis based digital synthesizer manufactured from 1983 to 1989. It was the first commercially successful digital synthesizer.

Joint compound mixes manufactured prior to the 1980s often contained a complex mixture of several substances. Among the additives used were asbestos fibers, which provided cohesiveness. Exposure to friable asbestos increases risks of various serious health conditions, including cancer. Joint compounds manufactured from 1980 onward were required to have asbestos removed in favor of other compounds due to legislation to ban asbestos' widespread use.

The frame of the FZ750 is manufactured from mild steel box-section and uses a perimeter layout. The fairing and upper rear section use separate cylindrical tubing sub-frames. The rear shock absorber is placed vertically behind the engine and connects to an extruded aluminium alloy swinging arm via several forged aluminium rocker arms. The front wheel is held between spring and oil damped forks.

For interior spaces, surfaces include solid coverings or decking for floors or walls, and countertops for kitchens, bathrooms, and workspaces. Natural surfaces are composed of naturally occurring materials like wood, stone, mineral, metals, clay, gum and resin. Synthetic surfaces contain, in addition to any natural materials, man-made substances such as metal alloys or polymers. Solid surfaces are synthetic surfaces manufactured from polymeric materials.

Nuclear graphite for the UK Magnox reactors was manufactured from petroleum coke mixed with coal-based binder pitch heated and extruded into billets, and then baked at 1,000 °C for several days. To reduce porosity and increase density, the billets were impregnated with coal tar at high temperature and pressure before a final bake at 2,800 °C. Individual billets were then machined into the final required shapes.

The Rover 8 was a small single-cylinder eight-horsepower 1327 cc car made by the British Rover car company. It was Rover's first production car. It was remarkable for being supported by a backbone chassis rather than a conventional ladder frame. The first model was manufactured from 1904 to 1912, A Daimler-Knight sleeve-valve engine option was available in 1911 and 1912.

The essential oil is manufactured from both low-THC ("fibre-type") and high-THC ("drug-type") varieties of hemp. As most of the phytocannabinoids are nearly insoluble in water, hemp essential oil contains only traces of cannabinoids. Even in "drug-type" hemp, the THC content of the essential oil does not exceed 0.08%. Hemp essential oil is used as a scent in perfumes, cosmetics, soaps, and candles.

Rainbow is an amusement park ride created by HUSS Maschinenfabrik of Bremen, Germany (now HUSS Park Attractions of Budapest, Hungary). The Rainbow was manufactured from 1982 to 2000 and is often confused with its cousins Ali Baba and 1001 Nachts, which are quite different. The HUSS Rainbow has developed a vast fan base due to its large stature, smooth ride, bright lights, and iconic motor noise.

Pembroke's early history is reflected in the various mills of the downtown area, located to use water power from the Suncook River. The better-known mills were the Pembroke Mills, Webster Manufacturing and China Manufacturing, all producing print cloth. Pembroke industries included brickmaking, with bricks manufactured from clay along the Merrimack River. In 1852, the Concord and Portsmouth Railroad established a station in Pembroke.

In 1905, when the town erected a new high school, the Ludowici family donated towards its construction costs and provided the roofing tile. In return, on August 23, 1905, the town was renamed and incorporated as Ludowici. The Ludowici Dixie Plant in its heyday covered more than and employed most people who resided in Long County. Tiles manufactured from this plant were stamped "Ludowici Dixie".

A-Square manufactured rifles usually came with stainless steel barrels as a standard feature. The barrels on the rifles use epoxy resin to bed the barrel to the stocks. Magazine boxes were manufactured from plate steel for rigidity and were also welded to the receiver. A-Square rifles were engineered to allow the firing pin to retract further into the bolt body than other firearms ().

The rotating mass of the turbine is now almost completely manufactured from composite materials significantly improving the power to weight ratio. Furthermore the control equipment is more intelligent, accurate and efficient, resulting in less down time caused by noise on the line and vibration issues being misinterpreted. The new software and algorithms have dramatically changed the turbine, enabling an impressive increase in energy generation and reliability.

The second series was manufactured, from 1937 on, the regular production of the 260D based on the Mercedes-Benz W143, with a four-speed fully synchronized transmission. The chassis was based on contemporary Mercedes technology and had transverse leaf spring independent front suspension and swing axles at the rear. The brakes were hydraulic. A range of body types were made including saloons, landaulettes and cabriolets.

The Eudelin was a French automobile manufactured from around 1905 until 1908. The product of a Parisian builder, it came in 14/16hp and 25/40 four-cylinder models. The company also produced an opposed-piston engine with a complex variable-stroke linkage. The original power unit was described as a "double piston engine with a single double throw crank directly below the combustion chamber".

The James Deluxe Autocycle was manufactured from 1946–49 and has a engine fed with a Villiers Junior carburettor and driven by one gear and a clutch. The frame was a single downtube and rigid frame. The front fork is a central undamped spring. Original tyres were Dunlop Carrier 26 inch by 2 inch (oversized) and rims are Dunlop WMO 36 hole in a silver argenized color.

The Elgé was a French automobile manufactured from 1924 until 1925. Created at Bordeaux by Roger Louis Maleyre, a pioneer in the field of aerodynamics, it was very low and light, and was well streamlined; the cars used CIM engines. Maleyre also produced a prototype design for a propeller-driven car which was never put into production. In total about thirty cars were produced.

The Hyundai Mighty (hangul:현대 마이티) is a line of light-duty commercial vehicle by Hyundai Motor Company. The range was primarily available in Korea and some other countries. Manufactured from 1987 with the first cars going to Asia, other European and American countries which saw import or manufacture of the Mighty included Europe, Mid-east, Africa, and South America. Korea was another market until early 1987.

Cocamidopropyl betaine (CAPB) is a surfactant manufactured from coconut oil that is increasingly used as an ingredient in personal hygiene products and cosmetics, such as shampoos, liquid soaps, cleansers and antiseptics, among others. CAPB may cause mild skin irritation, but allergic reactions to CAPB are rare and probably related to impurities rendered during the manufacturing process (which include amidoamine and dimethylaminopropylamine) rather than CAPB itself.

Many of these people would have gone to the United States. Ironically, however, the final image in O’Neill’s book depicts an unidentified piper that fits all the contemporary descriptions of Garrett Barry. This picture, titled here as ‘Lay of the Last Minstrel’, is derived from a postcard that was almost certainly manufactured from an original plate photograph, a process that was very typical at that time.

The locomotives numbering from 18530+ onward were manufactured from early 1980's. Almost all locomotives were rebuilt to WDM-3A standards, but most reverted to WDM-2 standards as they reach the end of their service life. A few are still in mainline service as WDM-3As. Most of them are fit only for shunting and inferior activities with half of them being condemned/scrapped.

The original DigiComp I A front view of the Digi-Comp I version 2.0 The Digi- Comp I was a functioning, mechanical digital computer sold in kit form. It was originally manufactured from polystyrene parts by E.S.R., Inc. starting in 1963 and sold as an educational toy for US$4.99. A successor, the Digi-Comp II, was not programmable, but in effect a visible calculator.

The Queensland Woollen Manufacturing Company produced good quality wool products. Tweeds, flannels, worsteds, blankets, rugs, and apparel were the advertised products of the factory. In an advertisement in the Queensland Times from 1879, the directors of the company advertised the purity of their cloths, "they are manufactured from Queensland Merino Wool. Free from shoddy mixtures of cloths gathered from prisons, hospitals, lunatic and other asylums".

The great success of the Para-Ordnance high-capacity 1911-type pistols led to design changes to some models starting in 1994. The Llama IX-C was manufactured from 1994 to 1997. It was similar to the Llama IX-A except for the 12-round double column magazine. This large-framed pistol had a -inch barrel and was inches long overall with a height of inches.

32 S&W; long revolver with 2-, 4- or 6-inch barrel and various sights. Llama revolvers had a better standard of manufacture and higher price. Manufactured from 1969 to 1978 and based on the Smith & Wesson Military and Police model but fitted with coiled mainspring. Martial: .38 Special calibre revolver with 2-, 4- or 6-inch barrel, ventilated rib and adjustable rear sights.

The sweetness profile may be altered during manufacturing by mixing with high- intensity sweeteners. Sugar alcohols are carbohydrates with a biochemical structure partially matching the structures of sugar and alcohol, although not containing ethanol. They are not entirely metabolized by the human body. They are found commonly in small quantities in some fruits and vegetables, and are commercially manufactured from different carbohydrates and starch.

Where temperatures are high and the pressure differential is small, a protection tube may be used with a bare thermocouple element. These are often made of alumina or other ceramic material to prevent chemical attack of the platinum or other thermocouple elements. The ceramic protection tube may be inserted into a heavy outer protection tube manufactured from silicon carbide or other material where increased protection is required.

Sources for these basic materials can be grouped into three main areas: Mining of mineral aggregate deposits, including sand, gravel, and stone; use of waste slag from the manufacture of iron and steel; and recycling of concrete, which is itself chiefly manufactured from mineral aggregates. In addition, there are some (minor) materials that are used as specialty lightweight aggregates: clay, pumice, perlite, and vermiculite.

Radithor was manufactured from 1918 to 1928 by the Bailey Radium Laboratories, Inc., of East Orange, New Jersey. The owner of the company and head of the laboratories was listed as William J. A. Bailey, a dropout from Harvard College, who was not a medical doctor.Literary Digest, 16 April 1932 It was advertised as "A Cure for the Living Dead" as well as "Perpetual Sunshine".

Asphalt is an aliphatic compound and in almost all cases a byproduct of the oil industry. Some asphalt is manufactured from oil as the intended purpose, and this is limited to high-quality asphalt produced for longer lasting asphalt built-up roofs (BUR). Asphalt ages through photo-oxidation accelerated by heat. As it ages, the asphalts melt point rises and there is a loss of plasticizers.

Indigenous lingchong cream manufactured from the pine-resin serves as the cosmetics for the Aka women. However, the interesting cane cap reaching three inches high inserted with two bird-feathers serves the highlight of the Aka costume. Silver ornaments play another important role in the female Aka costume. Vase- shaped earrings and for the richer ones, a fillet of silver chain is worn around the head.

Share of the Českomoravská-Kolben-Daněk, issued 1. November 1927 ČKD Tatra-T3 tram car in Prague. T3 was the most successful ČKD tram manufactured from 1960 to 1989; 13991 units were sold worldwide ČKD (Českomoravská Kolben-Daněk) () was one of the largest engineering companies in the former Czechoslovakia and today's Czech Republic. It is famous for the Tatra T3, a tramcar that sold 13,991 units worldwide.

Previous concept cars from Peugeot have been the Asphalte and 20Cup. The EX1 is a 2-door roadster that is shaped like a “water droplet”, with a rear section built around two closely set rear wheels. The EX1 features stylistic design codes first presented on the SR1 concept in earlier 2010. The monocoque body structure is manufactured from a carbon/honeycomb composite to optimise weight and rigidity.

As a national carrier, Bangladesh Railway is obliged to carry essential commodities such as grain and fertiliser to remote parts of Bangladesh at discounted rates. Bangladesh Railway transports containers from the Port of Chittagong to Dhaka Inland Container Depot, where there are customs facilities. The rolling stock to carry containers was manufactured from existing stock. On 5 August 1991, a container-only train came into service.

Machinery was brought from England and paper was manufactured from rags and reeds from the Georges River. The rags collected were stored in the old Collingwood flour mill. The factory which is reputed to be the first large paper mill in Australia became for a time the largest employer of men, women and children in Liverpool. Sir Saul Samuel (1820–1900) purchased Collingwood Estate in 1869.

An Adana press Adana Printing Machines were manufactured from 1922 to 1999 in Twickenham, England. Although most of the printing presses produced by Adana were aimed at hobby printers, they were frequently put to commercial use. Adanas are still to be found throughout the world in the hands of colleges, enthusiasts and professional printers. Caslon Limited manufactured machines after a takeover of the company in 1987.

Until the 19th century glass tubes were exclusively produced by mouth blowing, thus discontinuously manufactured from a batch or a glass melt. In 1912, E. Danner (Libbey Glass Company) developed the first continuous tube drawing process in the US, which works in horizontal direction. In 1918 he received a patent. In 1929 a vertical drawing process was developed by L. Sanches-Vello in France.

The earliest darts were stubs of arrows or crossbow bolts. The first purpose-made darts were manufactured from solid wood, wrapped with a strip of lead for weight and fitted with flights made from split turkey feathers. These darts were mainly produced in France and became known as French darts. Metal barrels were patented in 1906, but wood continued to be used into the 1950s.

Brass or bronze memorial plaques were produced throughout medieval Europe from at least the early thirteenth through the sixteenth centuries as a form of sepulchral memorial generally inset into the walls of churches or surfaces of tombs. Surviving in great numbers, they were manufactured from sheet brass or latten, very occasionally coloured with enamels, and tend to depict highly conventional figures with brief inscriptions.

Click on image for expanded view. The spinet piano, manufactured from the 1930s until recent times, was the culmination of a trend among manufacturers to make pianos smaller and cheaper. It served the purpose of making pianos available for a low price, for owners who had little space for a piano. Many spinet pianos still exist today, left over from their period of manufacture.

His book, Electronics for Scientists (co-written with Christie G. Enke), was seminal in introducing thousands of scientists to electronic methods of scientific data collection, leading to the nickname of "High Voltage Malmstadt". Malmstadt had a patent design for a titration apparatus. This was manufactured from 1954 by Sargent and sold under his name. Malmstadt wrote ten internationally used textbooks and more than 150 scientific articles.

Originally Wales (horizontal braces) and diagonal braces were installed on the piers. These braces have been replaced by a pair of rolled steel channels acting as the wale brace and a single diagonal consisting of a pair of plates. Rakers were installed on the outer face of each pile. Manufactured from wrought iron, they are secured to the wrought iron "helmet" at the end of the headstocks.

The decoder of the reed receiver is based on the 'resonant reed' unit. This comprises a number of vibrating metal reeds, each one having a tuned vibration frequency like a tuning fork. These reeds are manufactured from a single tapered sheet of iron or steel, giving a comb of reeds of varying length. This resembles the comb used to sound musical notes in a music box.

The company's products included brick moulds, "Lightning" brand concrete mixers, wheelbarrows, boats, power tools, trailers, wheels, hydraulic jacks, go-karts, range hoods, washing machines and spin driers. Lightburn began marketing domestic washing machines around 1949. The company had a deserved reputation for unsophisticated, well-made, rugged reliable products, but a later venture, the Zeta automobile, manufactured from 1963 to 1965, was an unmitigated failure.

The CBX750, or RC17 is a Honda motorcycle sold primarily in Europe, South Africa and Australia. Manufactured from 1984 to 1988, the CBX750 was developed from the CB750, in parallel with the VF750, a wholly new design. It is also used by motorcycle police in Malaysia, Singapore, Hong Kong, Turkey, Gibraltar and Ireland. The pre-1988 CBX750 had a front wheel, which restricts replacement tire choice.

It was first used in 2014 at the Bluewater and Antikythera underwater research expeditions. The ADS 2000 was developed jointly with OceanWorks International and the US Navy in 1997, as an evolution of the Hardsuit to meet US Navy requirements. The ADS2000 provides increased depth capability for the US Navy's Submarine Rescue Program. Manufactured from forged T6061 aluminum alloy it uses an advanced articulating joint design based on the Hardsuit joints.

The Mazda MX-5 (NB) is the second generation of the Mazda MX-5 manufactured from 1998 to 2005. The model continued the MX-5's philosophy of being a lightweight, front mid-engine, rear-wheel-drive roadster while featuring numerous performance improvements, however lacking its predecessor's retractable headlamps. The NB is also the only generation to feature a factory-built turbocharged variant in the form of the Mazdaspeed MX-5.

Once an animal is produced, typically using the pronuclear microinjection method, it becomes efficacious to use cloning technology to create additional offspring that carry the favorable modified genome. The first such drug manufactured from the milk of a genetically modified goat was ATryn, but marketing permission was blocked by the European Medicines Agency in February 2006. This decision was reversed in June 2006 and approval was given August 2006.

Costume designer Ane Crabtree approached her work by taking as inspiration the historical attire of the Wild West from the 1850s to the 1890s, as opposed looking purely at Westerns. Fabrics were custom-woven, dyed and printed for any actor with a speaking role to capture the intricacies of the costumes (most of which were manufactured from scratch). Hat designs were described as the most challenging part of the process.

Shrubby forms are palatable to stock but only in times of acute feed shortage. Smoking pipes have been manufactured from the roots and in 1895 the Australian Needle-wood Pipe Company was formed in Sydney. This plant was important to the Indigenous people and inland explorers as they sourced water from the roots. The tree was burnt which forced the water into the root system, then the roots were dug up.

Only variations of the sandwich that explicitly state "Angus" in the title are manufactured from meat from Angus cattle. In 2011, the company discontinued selling the product in the North American market, replacing it with the Chef's Choice burger. The Chef's Choice Burger was removed in 2012. 2014 saw the introduction of the newest attempt at introducing a premium burger to the company's portfolio with the introduction of the A.1.

By the fourth quarter of the 19th century, baleen was growing increasingly more expensive and becoming more difficult to acquire. This encouraged experimentation into types of materials used for boning. Some of the most popular alternatives were cork strips, cording, watchspring steel, Coraline, and Featherbone. Coraline was manufactured from the straight, stiff fibers of the Mexican ixtle plant, bound together by two strands of thread wrapped in opposite directions.

Knife blade mass production Knife blades can be manufactured from a variety of materials, each of which has advantages and disadvantages. Carbon steel, an alloy of iron and carbon, can be very sharp. It holds its edge well, and remains easy to sharpen, but is vulnerable to rust and stains. Stainless steel is an alloy of iron, chromium, possibly nickel, and molybdenum, with only a small amount of carbon.

Altolaguirre enlisted with the Republican forces and involved himself in printing projects. He printed Pablo Neruda’s España en el corazón (Spain in the Heart, 1938) on paper manufactured from old flags and uniforms of the enemy, the wet paper then hung with clothespins to dry. In 1939, Altolaguirre suffered an emotional collapse. Later that year, he and his family traveled to Mexico City, stopping off in Cuba for five years.

Many tires used in industrial and commercial applications are non-pneumatic, and are manufactured from solid rubber and plastic compounds via molding operations. Solid tires include those used for lawn mowers, skateboards, golf carts, scooters, and many types of light industrial vehicles, carts, and trailers. One of the most common applications for solid tires is for material handling equipment (forklifts). Such tires are installed by means of a hydraulic tire press.

Tribelhorn Baujahr 1908 The Tribelhorn was a Swiss electric car manufactured from 1899 until 1919 in Zurich. Production began in earnest in 1902; three- and four-wheelers were offered. The company also produced trolleytrucks that were used in Gümmenen and Mühleberg Switzerland between 1918 and 1922 during the construction of a dam. It produced only light utility vans after 1919 when it was taken over by EFAG (Electrische Fahrzeuge AG).

Non- combatant version (obverse) The medal for combatants was manufactured from captured bronze cannon barrels. The obverse shows the crowned Royal cypher of William I over the inscription Dem siegreichen Heere (To the victorious army). Inscribed around the edge is Gott war mit uns, Ihm sei die Ehre (God was with us, to Him be the glory). The reverse shows a cross with rays between the four arms.

These early mirrors were manufactured from single pieces of stone and were therefore of small size, rarely exceeding across. Mirrors were manufactured by using sand or some other abrasive material such as hematite powder to polish the iron ore until it produced a highly reflective surface.Joyce 2010, p.87. In the Valley of Oaxaca, only San José Mogote has produced evidence of mirror production dating as far back as the Preclassic.

273,265 Type I variants were manufactured in 1863. The Type II is sometimes referred to as the Model 1864, but is more commonly referred to as just a variant of the Model 1863. This version re-introduced band springs, replaced the clamping bands with solid oval bands, and replaced the three leaf rear sight with single leaf sight. A total of 255,040 of these were manufactured from 1864 to 1865.

Animal glue, especially hide glue, was the primary adhesive of choice for many types of woodworking, including furniture and lutherie, for many centuries. It is manufactured from rendered collagen from the skins (hides) of animals. It is chemically similar to edible gelatin and is non-toxic if ingested. Hide glue is still used today in specialized applications: musical instruments (lutherie), for replica furniture, and for conservation-grade repairs to antique woodwork.

The frame of the T140 is manufactured from mild steel tube and uses a 'duplex' layout. Twin rear adjustable shock absorbers provide suspension through a swinging arm, sprung and oil-damped front telescopic forks are used. The 19 inch diameter front wheel and 18 inch rear wheel were spoked with optional cast alloy wheels available from 1979 onwards. The under-seat area is occupied by the battery and ignition coils.

Heat- shrink tubing was invented by Raychem Corporation in 1962. It is manufactured from a thermoplastic material such as polyolefin, fluoropolymer (such as FEP, PTFE or Kynar), PVC, neoprene, silicone elastomer or Viton. The process for making heat-shrink tubing is as follows: First the material is chosen based on its properties. The material is often compounded with other additives (such as colorants, stabilizers, etc.) depending on the application.

The EMC E3 is a , A1A-A1A passenger train locomotive that was manufactured by Electro-Motive Corporation of La Grange, Illinois. The EMC demonstrator #822 was released from La Grange for test on September 12, 1938. The cab version, or E3A, was manufactured from September 1938 to June 1940, and 17 were produced. The booster version, or E3B, was manufactured in March 1939 and September 1939, and 2 were produced.

Frazer Nash was a brand of British sports car manufactured from 1922 first by Frazer Nash Limited founded by engineer Archibald Frazer-Nash. On its financial collapse in 1927 a new company, AFN Limited, was incorporated. Control of AFN passed to Harold John Aldington in 1929. Until the Second World War AFN continued to produce a small number of sports cars badged Frazer Nash incorporating a unique multi-chain transmission.

The Car de Luxe was an American automobile manufactured from 1906 until 1910. A sister marque to the Queen, the Car de Luxe had overhead valves which were operated by one rocker per cylinder. The 40/50 hp, 6755 cc car was actuated by a "push-pull" rod and an unusual back axle; the load was further taken by an I-beam dead axle which carried a separate differential unit.

The Shad-Wyck was an American automobile manufactured from 1917 until 1923 in Frankfort, Indiana. Run by the Shadburne Brothers of Chicago, the company's initial offerings seem to have been rebranded Bour-Davis cars. The company had been purchased by the brothers and production moved from Detroit to Frankfort. They announced that they would also be producing cars to their own designs but there is doubt if this ever happened.

The Otro Ford was a Spanish automobile manufactured from 1922 until 1924. As its name implied, it was heavily based on the Ford Model T, and was similar to the English Maiflower. The De Vizcaya brothers acquired several Ford Model T vehicles that were manufactured in Spain. They then added modifications to them, including the lengthening of the chassis as well as a radiator reminiscent of a Rolls-Royce.

Van/delivery van (V521) and double cab (U521) versions were available. It was manufactured from June, 1968–1972, preceded by the 520 and followed by the 620. The 521 was the first compact half-ton pickup sold in the American market, in 1968 . In 1968, larger load carrying duties were now shared with the Datsun Cabstar, a cabover truck sharing a chassis with the third generation Nissan Junior.

The shock absorbers were machined, oil-filled and completely tuneable; they were also produced from the same aluminium alloy. Suspension control arms were manufactured from high-impact nylon, as were the three-piece wheels. Optional metal shielded ball bearings were sometimes incorporated in RC10 wheels and transmissions. The RC10 transmission contained an innovative differential featuring hardened steel rings pressed against balls - which made it almost infinitely adjustable for any track condition.

The shape of a stone is variable and depends on how it was formed, becoming spherical, oval, triangular, tubular or irregular. Since natural calculus bovis are scarce they can be very expensive. There are artificial calculus bovis or bovis calculus artifactus used as substitutes. In China these are manufactured from cholic acid derived from bovine bile combined with dry bovine bile powder, porcine ursodeoxycholic acid, taurine, bilirubin, cholesterol, etc.

The Isabella was never produced in Mexico. Back in the German market, BMW’s stylish new 1500, launched by the Bavarians in 1961, convincingly filled the niche vacated by the Isabella, and was credited by at least one commentator with having rescued BMW itself from insolvency. In Argentina, the Isabella was manufactured from 1960 to 1963 by Dinborg, a local subsidiary of Borgward. 999 Isabellas were made in Buenos Aires.

The Railmark Track Works subsidiary supplies a line of bio- based, biodegradable rail curve and switch plate lubricants. Ultralube brand railroad lubricants are manufactured from renewable US-grown crop-based oils. RAILheat utilizes an environmentally safe and energy-efficient Far Infrared (FIR) technology that is designed to prevent freezing in railroad equipment and operations. These products meet the U.S. Environmental Protection Agency's (EPA) Environmental Preferable Purchasing (EPP) criteria.

The first joint venture between Isuzu and Jiangxi Automotive Manufacturing Plant (which would later be renamed JMCG) established in March 1983. Isuzu N-series trucks were manufactured from 1985 onwards. In 1993, when Jiangling Motors Corporation was spun off from JMCG, Jiangxi Automobile Manufacturing Co., Ltd. (a JMCG subsidiary), Itochu Trading and Isuzu created the Jiangling Isuzu joint venture to continue producing Isuzu-badged trucks for 20 years.

The horizontal projection to the front of a tread where most foot traffic frequently occurs. The nosing is the protrusion beyond the riser when vertical risers are used, or beyond the back of the tread below, when angled risers or no risers are used. Anti-slip strips or nosings may be applied, these stair parts can be manufactured from a variety of materials including aluminium, vinyl and wood.

The products were manufactured from Galvanized steel, copper and later aluminum (both pre painted and mill finish). By 1997 the company was operating 26 roll formers in a 200,000 sq. ft. manufacturing and distribution facility located in Warminster, Pennsylvania. In 1988 BOI acquired the patent for a rolled ridge vent, which began a new era of innovative products such as Roll Vent, Rapid Ridge, Cedar Breather, and eventually Home Slicker.

The Electromobile was an English electric car manufactured from 1901 until 1920. The product of a London company, it was offered as part of a contract hire scheme as early as 1904. From 1903 the engine was mounted on the rear axle. The design of the car changed little until after World War I; in 1919 a new model, the short-bonneted 8/13 hp Elmo electric, appeared.

The Tikka M55 (originally Tikka M76 and also Tikka LSA55) is a Finnish rifle designed by a Finnish firearms company Tikkakoski in 1967–1968. M55 was the first centerfire rifle action designed by Tikkakoski, and it was manufactured from 1968 to 1989. Tikkakoski also developed a long action rifle based on the M55, called Tikka M65. The Tikka M55 was imported to the United States by Ithaca Gun Company.

Weet-Bix was originally manufactured, from 1928, at 659 Parramatta Road, Leichhardt, where until recent times Sanitarium signage could still be seen. This factory antedates the purchase of Weet-Bix by Sanitarium in 1930. A factory was operating in Palmerston North in New Zealand, but closed in the late 1990s. The Hackney factory in Adelaide, South Australia was closed in October 2010, and the Cooranbong factory in 2018.

Evaporative cooling is possible in dry climates. Indirect coils use hot water or steam for heating, and chilled water or glycol for cooling (prime energy for heating and cooling is provided by central plant elsewhere in the building). Coils are typically manufactured from copper for the tubes, with copper or aluminium fins to aid heat transfer. Cooling coils will also employ eliminator plates to remove and drain condensate.

A bell jar is a glass jar, similar in shape to a bell, and can be manufactured from a variety of materials (ranging from glass to different types of metals). Bell jars are often used in laboratories to form and contain a vacuum. It is a common science apparatus used in experiments. Bell jars have a limited ability to create strong vacuums; vacuum chambers are available when higher performance is needed.

Many fire finders were manufactured from 1920 through 1935, but the manufacturer, Leupold & Stevens, Inc., stopped production of replacement parts after 1975. In recent years, with the resurgence and recovery of fire lookout towers, new Osborne devices were needed. The U.S. Forest Service, San Dimas Technology and Development Center (SDTDC) was contacted regarding the deteriorating condition of the Osborne Fire Finders housed in fire lookouts throughout the United States.

The woofer's diaphragm, weighing 3.7 g, is manufactured from a flat sheet of pressed pulp paper. Unconventionally, it is formed into conical shape not through moulding or pressure, but by curling and then gluing the two ends together. Against the black finish of the cabinet, the white bass/mid driver cone is a distinctive and iconic feature of the product. The network is second-order passive, crossing over at 2 kHz.

Many foods in a healthy diet contain high levels of naturally occurring phenols in fruits, vegetables, cereals, tea and coffee. Fruits like grapes, apple, pear, cherries and berries contain up to 200–300 mg polyphenols per 100 grams fresh weight. The products manufactured from these fruits also contain polyphenols in significant amounts. Typically a glass of red wine or a cup of tea or coffee contains about 100 mg polyphenols.

Formulas for home brewing gluten-free beer can now be found. Many of these include a sweet sorghum syrup as the principal carbohydrate. This is commercially manufactured from sorghum grain to be a malt substitute and contains amino acids and unfermentable sugars needed for yeast nutrition and "mouth feel". Other sugars can be added for character and "feel", such as honey and maltodextrin, and roasted or malted buckwheat.

Stone paper, also known as limestone paper, rock paper, generically referred to as bio-plastic paper, mineral paper or rich mineral paper, is a type of strong and durable paper-like material manufactured from calcium carbonate bonded with small amount of resin high-density polyethylene (HDPE). It is used for stationery, leaflets, posters, books, magazines, bags, packaging, wallpaper, adhesives, tags, in-mould labels, plates, trays, containers, and maps among other uses.

Only variations of the sandwich that explicitly state "Angus" in the title are manufactured from meat from Angus cattle. In 2011, the company discontinued selling the product in the North American market, replacing it with the Chef's Choice burger. The Chef's Choice Burger was removed in 2012. 2014 saw the introduction of the newest attempt at introducing a premium burger to the company's portfolio with the introduction of the A.1.

1917 Crow Elkhart 35 Crow-Elkhart C-E 36 Touring Share of the Crow-Elkhart Motor Corporation, issued 1. April 1919 The Crow-Elkhart was an American automobile manufactured from 1909 until 1924 by the Crow-Elkhart Motor Company of Elkhart, Indiana, founded by Martin E. Crow. The company manufactured both four and six cylinder models. After World War I, Crow-Elkhart used Gray victory engines in some of its cars.

All the modules were manufactured at the Tsukuba Space Center and were shipped to the KSC SSPF for launch processing. It is manufactured from stainless steel and titanium. Discovery carried with it replacement parts in a mid-deck locker for a malfunctioning toilet on the International Space Station. The crew had been using other facilities for waste until the new replacement parts were installed on the Zvezda module of the ISS.

Electron lenses are manufactured from iron, iron-cobalt or nickel cobalt alloys, such as permalloy. These are selected for their magnetic properties, such as magnetic saturation, hysteresis and permeability. The components include the yoke, the magnetic coil, the poles, the polepiece, and the external control circuitry. The pole piece must be manufactured in a very symmetrical manner, as this provides the boundary conditions for the magnetic field that forms the lens.

The sleeves often failed due to the way they were manufactured from chrome-molybdenum steel, leading to seized cylinders, which caused the loss of the sole prototype Martin-Baker MB 3.Flight 1945, p.550.Aeroplane 2010, pp. 65–66. The Ministry of Aircraft Production was responsible for the development of the engine and arranged for sleeves to be machined by the Bristol Aeroplane Company from their Taurus engine forgings.

Traynor YBA-200 bass guitar amplifier. Vacuum tubes were the dominant active electronic components in bass amplifiers manufactured from the 1950s until the early 1970s. Tube amplifiers for bass almost always use class AB1 topology for efficiency reasons. Many bass players believe that tube amplifiers produce a "warmer" or more "natural" sound than solid state amplifiers when lightly or moderately driven, and more pleasing distortion characteristics when overdriven.

By the Bronze Age most cultures were using mirrors made from polished discs of bronze, copper, silver, or other metals. The people of Kerma in Nubia were skilled in the manufacturing of mirrors. Remains of their bronze kilns have been found within the temple of Kerma. In China, bronze mirrors were manufactured from around 2000 BC, some of the earliest bronze and copper examples being produced by the Qijia culture.

It is also used in a wide range of consumer products. The largest use of n-butanol is as an industrial intermediate, particularly for the manufacture of butyl acetate (itself an artificial flavorant and industrial solvent). It is a petrochemical, manufactured from propylene and usually used close to the point of manufacture. Estimated production figures for 1997 are: United States 784,000 tonnes; Western Europe 575,000 tonnes; Japan 225,000 tonnes.

Members of the British armed forces wearing NBC suits in desert and temperate variants of DPM in 2015. The pattern was changed slightly with subsequent issues. On early 1960 Pattern (manufactured from 1966) and 1968 Pattern DPM uniforms the sand coloured base would appear to lighten in tone at night, becoming dangerously conspicuous. This was addressed in the late 1970s, when the sand and brown colours were slightly darkened.

The portico had a limestone paved floor, whitewashed walls, and limestone bases which held the two columns. The bases have been retained, but the columns themselves – possibly manufactured from wood – have not been preserved. The remains of a diorite statue of Khafre were found near the doorway of the temple, brought here at some later time. Through the doorway lay a vestibule with a roof supported by four columns.

A 49 cc motorcycle as it has no pedals which was manufactured from 1977 until 1983, it featured an air- cooled 2-stroke engine. The versions from 1977 until 1980 had a manual choke, points ignition, and a spring starter. Versions from 1980 onwards included a kick start (also on 1978/79 models), capacitor discharge ignition, and automatic choke as well as an improved compression ratio. Automatic 2 Speed.

Following the jungle training, the astronauts traveled to an entirely different environment: the desert of Reno, Nevada. For clothing, the astronauts had only long underwear, shoes, and robes they manufactured from their parachutes. Lizards and snakes were the main source of food, and the astronauts used their parachutes as makeshift tents for shelter for the two days of desert training. The third and final phase was operational training for the astronauts.

"Museums" in Japan Encyclopedia, pp. 671-673. The museum was built to contribute to the local cultural heritage, and the development of ceramics and pottery culture throughout Kyūshū, southern Japan. A valuable and extensive exhibition of work such as the famous Kanbara Collection of old Imari from Europe of the 17th to 18th centuries, as well as the Shibata Collection covering Arita pottery manufactured from 1603 to 1867.

The Colonial was an American automobile that was manufactured from 1920 until 1921. The car was built in Chicago, Illinois, and was nothing more than a Shaw with the emblem switched; it was, however, treated as an entirely separate marque. In 1921 the company returned to using the name "Shaw" for its vehicles; soon thereafter, the entire operation was sold to the Yellow Cab Company, which renamed it "Ambassador".

The Travelmate 6292 was manufactured from 2007-2009. It featured an Intel Centrino duo chip set consisting of 802.11a/g/draft-n, Bluetooth 2.0+edr and an Intel Core 2 Duo processor at 2.0 or 2.2 GHz. The unit came with 2GB of 667 MHz DDR2 SO-DIMM RAM, a 160GB HDD, and Intel GMA X3100 graphics accelerator. The laptop has been praised for its ruggedness, but faulted for its poor visual appeal.

1910 FAL-Car Advertisement Share of the FAL Motor Company, issued 11. August 1910 The Fal-Car, originally known as A Car Without A Name, was an American automobile manufactured from 1909 until 1914 by a company that identified itself in advertisements only as Department C, 19 North May Street, Chicago. The address had previously been the location where the Reliable-Dayton automobile had been built. It was advertised as "trim, classy, speedy and efficient".

Share of the Automobiles Juwel S.A., issued 19. July 1924 The Juwel was a Belgian automobile manufactured from 1923 until 1927 in Waremme by Société des Automobiles Juwel. Initial plans called for a mass-produced 1100 cc four cylinder tourer and two models were shown at the 1922 Brussels Motor Show. Bodies offered included open 2 and 4 seat cars, a 3 seat sports cars, two door saloon and a light delivery van.

Translucent curtains hung on a window. Curtains are manufactured from a variety of thick fabrics, each with a differing degree of light absorption and heat insulating qualities. For maximum temperature control, the curtain gap to the window should be small, with minimum convection drafts below or above the curtain. Various architectural structures around the curtain can minimize these air drafts, but usually they are just used for decoration and make rooms feel more cozy.

However, there is little evidence of secondary retouch flakes at the site (Faught 2004a). The fact that most of the cores and debitage are "mostly without much cortex" infers that the raw materials that these tools were manufactured from came from another location. This is supported by the fact that no quarry areas have been located at the site. Among the artifact assemblage at the site there are several temporally diagnostic stone tools.

In September 2015, Ruger also introduced the LCR in .327 Federal Magnum, a double-action only, six-shot revolver with a polymer subframe. Ruger also offers the similar LCRx with an exposed hammer in this chambering. In early 2017, Henry Repeating Arms announced production of four new lever-action long guns (a rifle and a carbine, each available with its receiver manufactured from either steel or hardened brass), with shipping scheduled to begin in March.

Gelatin capsules, informally called gel caps or gelcaps, are composed of gelatin manufactured from the collagen of animal skin or bone. Vegetable capsules, introduced in 1989, are made up of cellulose, an important structural component in plants. To be more specific, the main ingredient of vegetarian capsule is hydroxypropyl methyl cellulose (HPMC). In the current market, gelatin capsule is more broadly used than vegetarian capsule because its cost of production is lower.

An example of solid wood flooring with a top coating of polyurethane Wood flooring is any product manufactured from timber that is designed for use as flooring, either structural or aesthetic. Wood is a common choice as a flooring material and can come in various styles, colors, cuts, and species. Bamboo flooring is often considered a form of wood flooring, although it is made from a grass (bamboo) rather than a timber.

Launched in 2006 and continued production until 2013, it was the first vehicle to comply with the Euro IV Emission Standards, the ABS and ASR are standard equipment. The Irisbus Crossway was offered in four lengths: Crossway 10.8 m Manufactured since 2007 until 2013 as the replacement for Arway 10.6 m. Crossway 12 m Manufactured from 2007 to 2013 together with Crossway 10.8 m. It replaces the Arway 12.8 m amd Axer 12.8 m.

In the textile industry regenerated cellulose is used as fibers such as rayon, (including modal, and the more recently developed Lyocell). Cellulose fibers are manufactured from dissolving pulp. Cellulose-based fibers are of two types, regenerated or pure cellulose such as from the cupro-ammonium process and modified cellulose such as the cellulose acetates. The first artificial fiber, known as artificial silk, became known as viscose around 1894, and finally rayon in 1924.

Kansas' stone fenceposts were manufactured from bluffs that had been cut by regional rivers through the Blue Hills. On these hills, the unweathered limestone bed can be exposed by removing shallow overburden. Quarrying leaves a long trench from in width in which water can collect after a rain. Traditionally, these posts were manufactured in-place by drilling lines of holes directly into the freshly exposed, soft limestone bed (only about halfway through).

The Mazda MX-5 (NC) is the third generation of the Mazda MX-5 manufactured from 2005 to 2015. At its introduction in 2005, it won the Car of the Year Japan Award and made Car and Drivers 10Best list from 2006 to 2013. The NC is the first MX-5 generation to feature a retractable hardtop variant, with its roof being able to fold and unfold in 12 seconds without sacrificing trunk space.

Some vehicles manufactured from the late 1990s to mid 2000s have a MIL that illuminates based on the odometer reading, regardless of engine operation. For example, in several Mazda models, the light will come on at and remain lit without generating a computer trouble code. Volvo had a light labeled "Lambda", Lambda Sond being another name for oxygen sensor. This was done in order to remind the driver to change the oxygen sensor.

Running water for the trailer is usually provided by some sort of water source on the property, usually through a garden hose. Sewage is piped directly to an underground sewage main on the property. Most trailers have several windows which can be opened, as well as small light fixtures in each room. FEMA trailers are manufactured from plastic, aluminum, and particle board, and are therefore somewhat flimsy and require more maintenance than a permanent structure.

A typical CNC wood router with suction holes visible The wood router typically holds wood with suction through the table or pods that raise the work above the table. Pods may be used for components which require edge profiling (or undercutting), are manufactured from solid wood or where greater flexibility in production is required. This type of bed requires less extraction with greater absolute vacuum. A second type hold down uses a spoil board.

In Mill Street carts, waggons, and bicycles were manufactured from 1855, and elsewhere motor vehicles were also produced until the late 1950s. John Cockerill moved to the town from Haslingden before leaving for continental Europe to become the founder of Cockerill-Sambre. James Cockerill, employed Radcliffe man William Yates as his manager. Several foundries and machine manufacturers were located around the town, including Dobson and Barlow at Bradley Fold, and Wolstenholme's along Bridgewater Street.

Alekseyev designed the I-218 as a heavily armed, and armoured, attack aircraft for use in close support and anti-tank missions. The twin boom aircraft had a central nacelle housing the pilot and gunners cockpits as well as the engine and forward firing armament. All armoured and highly stressed parts were manufactured from 30KhGSNA nickel-steel. Flight testing may have commenced in 1948, but there is no direct evidence of this.

The EMD NW2 is a , B-B switcher locomotive manufactured by General Motors Electro-Motive Division of La Grange, Illinois. The NW2 was manufactured from February 1939 to December 1949, and 1145 were produced – 1121 for the U.S., and 24 were exported to Canada. Starting in late 1948 the NW2s were manufactured in EMD's Plant #3 in Cleveland, Ohio. The was achieved by using a 12-cylinder, model 567, and later, a model 567A engine.

Rubber imprinting tools (stamps) are impressed into thin pre-mixed concrete overlay material shortly after it is placed to create natural stone or brick textures. These rubber imprinting tools are manufactured from molds created from authentic stone or wood. Release agents are used to help release the stamps from the concrete without sticking. Release agents come in either a liquid or powder form and are available in a wide range of colors.

Epoxidized linolein, a major component of ESBO. ESBO is manufactured from soybean oil through the process of epoxidation. Polyunsaturated vegetable oils are widely used as precursors to epoxidized oil products because they have high numbers of carbon-carbon double bonds available for epoxidation. The epoxide group is more reactive than double bond, thus providing a more energetically favorable site for reaction and making the oil a good hydrochloric acid scavenger and plasticizer.

An International Harvester Type A tractor, manufactured from 1908 to 1913 A 1954 R-110 series pickup In 1926, IH's Farmall Works built a new plant in Rock Island, Illinois. By 1930, the 100,000th Farmall was produced. IH next set their sights on introducing a true 'general-purpose' tractor to satisfy the needs of the average American family farmer. The resulting 'letter' series of Raymond Loewy-designed Farmall tractors in 1939 proved a huge success.

Water is an ideal cooling medium for vessels as they are constantly surrounded by water that generally remains at a low temperature throughout the year. Systems operating with sea water need to be manufactured from cupronickel, bronze, titanium or similarly corrosion-resistant materials. Water containing sediment may require velocity restrictions through piping to avoid erosion at high velocity or blockage by settling at low velocity.Thermex "Heat Exchanger FAQ Page" 2016-12-12.

Traditionally, air ductwork is made of sheet metal which was installed first and then lagged with insulation. Today, a sheet metal fabrication shop would commonly fabricate the galvanized steel duct and insulate with duct wrap prior to installation. However, ductwork manufactured from rigid insulation panels does not need any further insulation and can be installed in a single step. Both polyurethane and phenolic foam panels are manufactured with factory applied aluminium facings on both sides.

It featured a portal operating gantry crane for the handling and transport of self-supporting cassettes. This was the precursor of the first combined storage and sawing systems that Kasto manufactured from 1980 onwards. In 2014 Kasto celebrated its 170th anniversary. For over 25 years, Armin Stolzer has been at the helm of this family business – now in its fifth generation – and has recently brought the sixth generation on board as well.

It used the same 75 x 495R ammunition as the 7.5 cm KwK 40 of Panzer IV and 7.5 cm StuK 40 gun fitted on the Sturmgeschütz assault guns. The Pak 39 was manufactured from 1943 onwards by Rheinmetall-Borsig AG in Unterlüß and by Seitz-Werke GmbH in Bad Kreuznach. The main types of ammunition used were: Panzergranatpatrone 39 (APCBC), Sprenggranatpatrone 37 (HE) and different versions of the Granatpatrone 39 HL (HEAT).

The AK-47 was originally equipped with a buttstock, handguard and an upper heat guard made from solid wood. With the introduction of the Type 3 receiver the buttstock, lower handguard and upper heatguard were manufactured from birch plywood laminates. Such engineered woods are stronger and resist warping better than the conventional one-piece patterns, do not require lengthy maturing, and are cheaper. The wooden furniture was finished with the Russian amber shellac finishing process.

In the craft manufacturing process, the final product is unique. While the product may be of extremely high quality, the uniqueness can be detrimental as seen in the case of early automobiles. Womack, Jones and Roos in the book The Machine That Changed the World detailed that early automobiles were craft produced. Because each vehicle was unique, replacement parts had to be manufactured from scratch or at least customized to fit a specific vehicle.

It was manufactured from 1994, until 2005. The Series 50 was also marketed as the Series 50G, for its CNG and LNG versions. Displacement can also be very small, as found in kei cars sold in Japan, such as the Subaru EN series; engines that started out at 550 cc and are currently at 660 cc, with variable valve timing, DOHC and superchargers resulting in engines that often claim the legal maximum of .

Milk chocolate is manufactured from cocoa, milk and sugar. The ingredient which defines the product as chocolate, cocoa bean, is mainly grown in Southeast Asia, South America, and West Africa, particularly the Ivory Coast, which supplies 40 percent of the total global cocoa market. Once the cocoa pods are harvested, the seeds, known as "beans", are removed and fermented, then dried. They are then taken to a processing plant where they are cleaned and roasted.

However, since Nippon Kokagu made five different metering heads over the life of the F2, there were five different F2 Photomic versions. The use of any Photomic head requires that batteries (two S76 or A76, or SR44 or LR44) be installed in the F2 body to power the head's electronics. Nikon DP-1 and DP-2 viewfinders The original Nikon F2 Photomic, packaged with the Nikon DP-1 head, was manufactured from 1971 to 1977.

Tonio Licordari La riflessione Valorizzare ora questa risorsa sulla scia dell'onda... profumata Gazzetta del Sud Cronaca di Reggio. Retrieved on 18 February 2010. Natural source analysis based on the Carbon-14 method can identify adulterated essences by detecting synthetic chemicals manufactured from petroleum that are used to mimic the chemical profile of bergamot oil and other essential oils. Gas chromatography with columns having a chiral stationary phase allows analyzing mixtures of enantiomers.

A descendant of the tracksuit, the shell suit, which arrived in the late 1980s, was popular with the hip hop and breakdancing scene of the era. They were manufactured from a mix of cellulose triacetate and polyester making them shiny on the outside, with distinctive combinations of colours. Most tracksuits have a mesh interior which allows the user to wear them without any undergarment such as underwear. This is much like a bathing suit.

Most cryolite is manufactured from aluminium oxides, hydrofluoric acid, and sodium hydroxide or the equivalent reagent hexafluorosilicic acid:J. Aigueperse, P. Mollard, D. Devilliers, M. Chemla, R. Faron, R. Romano, J. P. Cuer, "Fluorine Compounds, Inorganic" in Ullmann’s Encyclopedia of Industrial Chemistry, Wiley-VCH, Weinheim, 2005. :6 NaOH + Al2O3 \+ 12 HF → 2 Na3AlF6 \+ 9 H2O The mineral cryolite was mined at Ivigtût on the west coast of Greenland until the deposit was depleted in 1987.

Kala namak is a kiln-fired rock salt used in South Asia with a sulphurous, pungent-smell. It is also known as "Himalayan black salt", Sulemani namak, bit lobon, kala noon, or pada loon and manufactured from the salts mined in the regions surrounding the Himalayas. The condiment is composed largely of sodium chloride with several other components lending the salt its colour and smell. The smell is mainly due to its sulfur content.

The Astatic was a French cyclecar manufactured from 1920 to 1922 by Automobiles Astatic, Saint-Ouen, Seine, France. Built at Saint-Ouen, the car was an attempt to market a vehicle with independent suspension all round. This was done by coupling each wheel to a horizontal coil spring by a right angle link. At the rear the differential housing was fixed to the chassis and drive was taken to the wheels through jointed drive shafts.

The Apollo was an American sports car/personal automobile, initially manufactured from 1962 to 1964 by International Motor Cars in Oakland, California. Engineered by Milt Brown and designed by Ron Plescia, it featured handmade Italian aluminum coachwork by Intermeccanica, with a choice between two-seater convertible or fastback styles. Power came from a or Buick engine mated to a 4-speed manual. The initial company built 42 cars before suspending production while seeking new financing.

Khattabka () is a popular Russian and Chechen name for a homemade hand grenade. It was dubbed so after Ibn Al-Khattab and used by various North Caucasus rebels. They are commonly manufactured from cartridges VOG-17 and VOG-17M for AGS-17 grenade launcher of Soviet design supplied with standard grenade fuses (Russian: УЗРГМ, also Soviet design).Борис Прибылов, Евгений Кравченко, "Ручные и ружейные гранаты" ("Hand and Rifle Grenades"), Арктика 4Д, , 776 pp.

Tree complexity has increased over the last few decades. They are frequently manufactured from blocks of steel containing multiple valves rather than being assembled from individual flanged components. This is especially true in subsea applications where the resemblance to Christmas trees no longer exists given the frame and support systems into which the main valve block is integrated. Note that a tree and wellhead are separate pieces of equipment not to be mistaken as the same piece.

A liana in the Arecaceae, or palm, family, Korthalsia bejaudii is an endemic growing in the forests of Cambodia, noted from Kampong Cham Province. The species is distinguished by shortened, truncate ocrea that do not disintegrate and possessing flattened spines, crowded near the tip, and leaves that are the same colour either side. Luxury canes and baskets were manufactured from the stalks, its names in Cambodia include phdau prèah and prèah phdau (phdau='rattan', prèah='sacred', Khmer).

Most marathon vehicles are of a modern design, tailor-made for competition. They are manufactured from steel, aluminium or other alloys and may have hydraulic disc brakes on front and rear wheels, low centre of gravity and very small turning circle. A tougher harness is also used in the marathon phase, often made from synthetic materials rather than the traditional leather. "Three-phase" carriages are popular, especially at entry levels, as drivers need only one vehicle.

Activated carbon is a highly porous, amorphous solid consisting of microcrystallites with a graphite lattice, usually prepared in small pellets or a powder. It is non-polar and cheap. One of its main drawbacks is that it reacts with oxygen at moderate temperatures (over 300 °C).Activated carbon nitrogen isotherm showing a marked microporous type I behavior Activated carbon can be manufactured from carbonaceous material, including coal (bituminous, subbituminous, and lignite), peat, wood, or nutshells (e.g.

The incorporation of biochar into soil has been investigated to reduce nitrous oxide emissions from ruminant urine patches. Biochar is a carbon-rich compound manufactured from the thermal decomposition of organic matter in oxygen-deprived conditions at relatively low temperatures. Biochar serves to reduce nitrous oxide emissions by altering nitrogen transformation rates in urine-contaminated soils. Detailed field data such as seasonal effects and repeated soil exposure are still lacking and research on this subject is ongoing.

Second-generation biofuels, also known as advanced biofuels, are fuels that can be manufactured from various types of non-food biomass. Biomass in this context means plant materials and animal waste used especially as a source of fuel. First-generation biofuels are made from the sugars and vegetable oils found in food crops using standard processing technologies. Second-generation biofuels are made from different feedstocks and therefore may require different technology to extract useful energy from them.

Eric Longden was a British cyclecar brand manufactured from 1920 to 1927, originally by the Australian racing driver Eric Longden, and from 1922 by the Air Navigation and Engineering Company from Addlestone (Surrey). ANEC also built the Blériot-Whippet. In 1922 there were four models: The 8 hp and 10 hp both had V2 engines. The 8 hp was side-valved and had a 1.0 litre displacement, while the 10 hp had overhead valves and a 1.1 litre displacement.

MEDPOR is a high-density porous polyethylene implant manufactured from linear high-density polyethylene.OPTIONS: MEDPOR Biomaterial and Surgical Implants Development in polymer chemistry has allowed introduction of newer biocompatible material such as porous polyethylene (PP) to be introduced into the field of orbital implant surgery. Porous polyethylene enucleation implants have been used since at least 1989. It is available in dozens of prefabricated spherical and non-spherical shapes and in different sizes or plain blocks for individualized intraoperative customizing.

Cream can be skimmed from whey. Whey cream is saltier, tangier, and "cheesier" than ("sweet") cream skimmed from milk, and can be used to make whey butter. Due to the low fat content of whey the yield is not high, with typically two to five parts of butter manufactured from the whey of 1,000 parts milk. Whey cream and butter are suitable for making butter-flavoured food, as they have a stronger flavour of their own.

India, where it has traditionally been marketed as The Great Family Nourisher, is the largest market for Horlicks. The Indian formulation for Horlicks is slightly different than in most other countries, as there it is manufactured from buffalo milk rather than cows milk. In 2003, the brand underwent a revamp which led to the introduction of new flavours such as vanilla, toffee, chocolate, honey, and elaichi (cardamom). The current line-up of flavours include original (malt), chocolate and elaichi.

In 2002, Focal launched another innovation to their product line, the Beryllium Tweeter, which was only the second time a tweeter had ever been manufactured from Beryllium. Yamaha had introduced the Beryllium tweeter and Beryllium mid-range speaker in the NS-1000 back in 1974. Beryllium is seven times more rigid than titanium (six times more rigid than aluminum), but has the same mass. It enabled Focal to develop a lighter and faster tweeter which provides excellent damping qualities.

Featherbone was manufactured from the quills of feathers. The extremely rigid and elongated torso popular in the 1880s to early 1890s required extensive boning to support and enhance the steam-molded and starched corsets of the period. By the late 1890s, a lighter, shorter style of corset was becoming popular, which had simpler shapes and which used much less boning than the previous decade. This style of corset quickly evolved into the beautifully complex early Edwardian style corsets.

The quality of such firearms varies widely, ranging from as good as a factory-produced example to dangerously poor. Much of the gunsmithing is centered around the town of Darra Adam Khel. In India, use of improvised country-made pistols is widespread, especially in the regions of Bihar and Purvanchal. The manufacture of these weapons has become a cottage industry, and the components are often manufactured from scrap material, such as gun barrels fashioned from truck steering columns.

Public Transport Centenary, Victoria Square. Prototype "H1" tram 381 - Sunday 11 June 1978 After the war, an assisted migration scheme brought 215,000 emigrants of many European nationalities to South Australia between 1947 and 1973. Electrical goods were manufactured in former munitions factories and Holden cars were manufactured from 1948. An earthquake did considerable damage in March 1954. The Mannum–Adelaide pipeline brought River Murray water to Adelaide in 1955 and Adelaide Airport opened at West Beach in 1955.

The Brütsch Mopetta is an egg-shaped, single-seat, three-wheel automobile manufactured from 1956–1958 with a total production of 14. It was the smallest in a series of microcars designed by Egon Brütsch. With a single wheel at the front, the Mopetta is an open roadster with a fiberglass body, with one example having a detachable, transparent, folding hood. The Mopetta used a ILO V50 engine with a pull start and an integral three-speed gearbox.

In 1614, Louis XIII pronounced his vows in the church and notably promised to "build a church dedicated to the Virgin in Paris if the struggle against the Protestants was victorious". So he built Notre-Dame-des-Victoires which is considered as the daughter church of Notre-Dame-des-Vertus. An organ was manufactured from 1630 to 1635. It was restored by organ builders Robert Chauvin from Dax and Louis Benoist and Pierre Sarelot from Le Mans.

The wooden construction proved problematic in this theatre, not enduring wet weather or cold well. The war time Lukko glue, manufactured from ersatz materials, which was used for gluing the wooden parts, did not stand rain, frost and humidity, and the glue seams disintegrated, sometimes with disastrous results. Ten Myrskys were lost in accidents between 1943 and 1947 and four pilots died. Myrsky usage ended in May 1947 and the last Myrsky flight was in February 1948.

Microfiber textiles tend to be flammable if manufactured from hydrocarbons (polyester) or carbohydrates (cellulose) and emit toxic gases when burning, more so if aromatic (PET, PS, ABS) or treated with halogenated flame retardants and azo dyes. Their polyester and nylon stock are made from petrochemicals, which are not a renewable resource and are not biodegradable. For most cleaning applications they are designed for repeated use rather than being discarded after use.Barbara Flanagan, The Case of the Missing Microfiber.

Autolite 4300A Carburetor The Autolite 4300 was a Ford (also used by AMC) carburetor manufactured from 1967 through 1974. These carburetors were produced as an emissions-compliant replacement for the previous Autolite 4100 model, and were later superseded by the Motorcraft 4350. Both the 4300A and 4300D are unique by virtue of having spread bore throttle plate designs (the 4300A being much less pronounced than the 4300D) that are unique to these carburetors and their relative intake manifolds.

Low magnetic motors or nonmagnetic electric motors are designed to provide a reduced emanating magnetic stray field signature. These electric motors are manufactured from as little magnetic material as possible. The parts and components used to manufacture these electric motors are selected from materials with a low magnetic permeability. There are three major means of reducing the emanating magnetic stray fields of an electric motor: a dedicated electric and magnetic layout, electromagnetic shielding and additional compensating coils.

The Mercedes-Benz Vaneo was a five-door, seven-seater compact MPV (M-segment in Europe) that was manufactured from 2002 to 2005. It used the automobile platform from the first generation Mercedes-Benz A-Class. Up to seven seater capacity was available, but this vehicle was not built as a van, instead it was built as a MPV. The name Vaneo is derived from the word Van, which is used in German for the car types MPV.

Bearing housings are usually made of grey cast iron. However, various grades of metals can be used to manufacture the same, including ductile iron, steel, stainless steel, and various types of thermoplastics and polyethylene- based plastics. The bearing element may be manufactured from 52100 chromium steel alloy (the most common), stainless steel, plastic, or bushing materials such as SAE660 cast bronze, or SAE841 oil impregnated sintered bronze, or synthetic materials. ISO 113 specifies internationally accepted dimensions for plummer blocks.

This variant was replaced in production by the second version, the Sd.Kfz. 234/1, which had a simpler open turret (Hängelafette 38)panzernot.net, Sd.Kfz. 234/2 - The Sd.Kfz. 234 armed with a 2 cm KwK 38 gun; it was manufactured from mid 1944 to early 1945. 5 cm KwK 39/1 used in a Sd.Kfz. 234/2, Panzermuseum Munster The Sd.Kfz. 234/3, produced simultaneously with the 234/1, served as a support vehicle for the reconnaissance vehicles.

Black Tea is the usual farm produce, while a delicate white tea, which is manufactured from the buds and unfurled new leaves is also grown to order. A green tea, known for its flowery flavour; and the Oolong tea are also produced. About 75 per cent of tea produced in Sikkim is sold via the Kolkata auction centre while the remaining is packaged for local sale. The tea is popular in the international market deu to being completely organic.

This is often achieved on large sites by surrounding the plant with a berm. The US Environmental Protection Agency (EPA) requires that oils and fuels stored over certain volume levels be placed in secondary spill containment. Berms for spill containment are typically manufactured from polyvinyl chloride (PVC) or geomembrane fabric that provide a barrier to keep spills from reaching the ground or navigable waterways. Most berms have sidewalls to keep liquids contained for future capture and safe disposal.

Indeed, under the ASTM definition, the only criterion needed for a plastic to be called compostable is that it has to appear to go away at the same rate as something else that one already knows is compostable under the traditional definition. Plastic bags can be made "oxo-biodegradable" by being manufactured from a normal plastic polymer (i.e. polyethylene) or polypropylene incorporating an additive which causes degradation and then biodegradation of the polymer (polyethylene) due to oxidation.

The JO.LO.AR. was a semi-automatic pistol of Spanish origin and is chambered in various calibres. It is a development of the Extractor Model Sharpshooter pistol and was manufactured from 1924 by Bonifacio Echeveria STAR, with patent by J. Lopez de Arnaiz and renamed the JO-LO-AR, hence the designer's initials. The new design lacked the trigger guard and it was chambered in a wide range of calibres from 6.35×16mm (.25 ACP), 7.65×17mm (.

The king poles support the bulk of the weight, while the side poles give the fabric shape. Originally, they were manufactured from cotton canvas covers, wooden poles, and hessian rope but they have been largely replaced with more modern materials. In the United Kingdom, hire companies offer "American-style" pole tents with PVC covers, aluminium poles, and nylon ropes. The introduction of modern fabrics extends the shelf life of the marquees, as they are far more easily cleaned.

The air pumps were direct acting twin-type pumps, fitted in duplicate for each condenser and independently driven. Steam was supplied at a pressure of 170 lb per square inch by four double-ended cylindrical boilers, arranged to work under forced draught with closed stokeholds. Each of the boilers was fitted with eight furnaces of the suspension type. There were four combustion chambers, each common to two furnaces, the shell plates and stays being manufactured from high-tensile steel.

The 1980 Suzuki GS450 is a 448cc engine street racer bike that was first created by the Japanese manufacturer Suzuki in direct competition with Honda's CM series. It was put into production after its predecessor, the GS 400, which was manufactured from 1976-1981, and discontinued when its successor, the GS500, entered production from 1989-2009. The GS450 is considered a standard, a relatively small bike that can be extensively modified to suit a rider's taste.

Tang Dynasty stoneware with celadon glaze (Yue ware), found in Samarra, Iraq. Yue ware originated in the Yue kilns of Northern Zhejiang, in the site of Jiyuan near Shaoxing, called "Yuezhou" (越州) in ancient times.The arts of China by Michael Sullivan p.90ff Yue ware was first manufactured from the 2nd century CE, when it consisted in some very precise imitations of bronze vessels, many of which were found in tombs of the Nanjing region.

Seven layers of strata were identified, including bedrock at the lowest level and the agricultural plowzone at the top. Large number of stone flakes (debitage) related to the manufacture of stone tools were recovered, as were sixteen tools. The tools were manufactured from a variety of stone, predominantly rhyolite and chert, that were not local to the area. Fragments of pottery were also recovered, and one hearth-like feature was identified, whose charcoal fragments yielded radiocarbon dates of c.

Another unique feature of the vehicle's design were two pairs of chain-driven auxiliary wheels, which could be lowered to provide additional traction on muddy terrain. The BRDM-1 was manufactured from 1957 to 1966, at which time 10,000 had entered service with the Soviet Union and its military allies around the world. It was thereafter superseded by the improved BRDM-2, which possessed greater amphibious capabilities, a more powerful engine, and a fully enclosed turret.

Imaging is commonly used to evaluate the length and path of the potential veins before the practitioner selects the most appropriate vein. The catheter size for PICC lines is generally measured in French gauge, and may range from 2-5. Catheters are also manufactured from multiple materials, including silicone and polyurethane. The insertable portion of a PICC varies from 25 to 60 cm in length, which is sufficient to reach the desired end position in most cases.

Bucciali TAV8-32 "Fleche d'Or" Side view of Saoutchik's design The Bucciali was a French automobile manufactured from 1922 until 1933. Built by the brothers Angelo and Paul-Albert Bucciali, the company's first vehicle, produced at Courbevoie, was a cyclecar, sold under the name Buc. Initial offerings were powered by 1,340 cc two-cylinder two-stroke engines. In 1925 a 1,600 cc S.C.A.P.-engined model appeared, available in two versions, the "Tourisme" and the "Quatre Speciale" supercharged.

Mercedes-Benz G63 AMG 6×6 is an SUT manufactured by Mercedes-Benz. An SUT derivative of the six wheel drive Mercedes Geländewagen developed for the Australian Army from 2007,Mercedes-Benz G-Class#Military operators at the time it was the company's largest and second most expensive street-legal offroad vehicle. It was manufactured from 2013 to 2015 by Magna Steyr in Graz, Austria. A 700 G63 6x6, a tuned version of the G63 made by Brabus.

Kerr's Patent Revolver was an unusual 5-shot single-action revolver manufactured from 1859 to 1866 by the London Armoury Company. It was used by Confederate cavalrymen during the U.S. Civil War. Seven of these revolvers were held by the New Zealand Colonial Defence Force in 1863 and were issued to the famous Forest Rangers at the start of the campaign to push Maori rebels out of the Auckland province. It is easily recognized by its side-mounted hammer.

Healey purchased an Alfa Romeo 8C 2300 and developed a new car model with an Alfa inspired straight-8 engine type named the Triumph Dolomite. Three of these cars were made in 1934, one of which was used in competition and destroyed in an accident. The Dolomites manufactured from 1937 to 1940 were unrelated to these prototypes. In July 1939 the Triumph Motor Company went into receivership and the factory, equipment and goodwill were offered for sale.

For the Lord of the Rings film trilogy, realistic looking PVC chainmail was made, not just for the lead actors, but also for the hundreds of extras that appeared throughout the films. PVC pipe was cut into rings, assembled by hand into a semblance of armor, and then electroplated. A total of 82.9 million links were manufactured from 7 miles of PVC pipe. The workshop now has a division, Weta Tenzan Chain Maille, making chainmail for film work.

The 1936 Stout Scarab is often regarded as the first minivan. The passenger seats in the Scarab were moveable and could be configured for the passengers to sit around a table in the rear of the cabin. Passengers entered and exited the Scarab via a centrally-mounted door. The DKW Schnellaster — manufactured from 1949 to 1962— featured front-wheel drive, a transverse engine, flat floor and multi-configurable seating, all of which would later become characteristics of minivans.

It was the first concert organ in the United States and was installed at the Boston Music Hall. The organ case was made of American black walnut by the Herter Brothers of New York, for whom Searles had once worked, and is based on a case design by Hammatt Billings. The display pipes were manufactured from burnished Cornish tin. In 1881, the Boston Symphony Orchestra was founded, and the Boston Music Hall was their first home.

Starting from 2019, the French private team Tech3 became KTM's first satellite team. For the 2020 season, KTM completely redesigned the RC16 chassis based on feedback from development rider Dani Pedrosa. The upgraded RC16 features a hybrid chassis design (combining elements of twin spar and trellis frame designs) manufactured from steel, and a carbon fibre swingarm. In 2020 Brad Binder achieved KTM's first win as a constructor in the premier MotoGP class at the Czech Grand Prix.

Several models of the turret (AMX ELC bis) were tested on chassis manufactured from plans created by Hotchkiss.1955 ELC AMX , Chars Francais The vehicle's drive suspension featured four roadwheels and two top rollers on each side.ELC-AMX A new chassis began development in 1957, and was completed in 1961 under the designation of the ELC bis; this newer prototype had five roadwheels per side. The prototype is preserved at the Museum of Armour in Saumur.

Obsidian tools from Tilkitepe, Turkey, 5th millennium BC. Museum of Anatolian Civilizations In the Ubaid in the 5th millennium BC, blades were manufactured from obsidian extracted from outcrops located in modern-day Turkey. Ancient Egyptians used obsidian imported from the eastern Mediterranean and southern Red Sea regions. Obsidian was also used in ritual circumcisions because of its deftness and sharpness. In the eastern Mediterranean area the material was used to make tools, mirrors and decorative objects.

The Olympus OM-4, an improved version of the OM-2, was manufactured from 1983 to 1987. It was introduced at a US$685 list price for the body alone. It was a battery- powered, electromechanically controlled, manual focus SLR with manual exposure control or aperture priority autoexposure. It used a horizontal cloth focal plane shutter with a speed range of 240s (in auto mode) to 1/2000s plus bulb, and flash X-sync of 1/60s.

In dentistry, plaster is used for mounting casts or models of oral tissues. These diagnostic and working models are usually made from dental stone, a stronger, harder and denser derivative of plaster which is manufactured from gypsum under pressure. Plaster is also used to invest and flask wax dentures, the wax being subsequently removed by "burning out," and replaced with flowable denture base material. The typically acrylic denture base then cures in the plaster investment mold.

The Allright (known in Germany as the Allreit and outside of Germany as the Vindec-Special) was a German automobile manufactured from 1908 to 1913 at the Cologne-Lindenthal factory that produced Allright, Tiger, Roland, and Vindec- Special bicycles and motorcycles. The first Allright-Mobil of 1908 was offered with an air-cooled Hans-Otto Neubauer, "Allright (Allreit)", in G. N. Georgano, ed., The Complete Encyclopedia of Motorcars 1885-1968. (New York: E. P. Dutton and Co., 1974), pp.

The Comet has a large uncluttered cockpit, rear mainsheet (with centre mainsheet permitted under class rules) and an unbattened sail with a sleeve luff on an unstayed rig. The hull and deck is manufactured from glass-reinforced plastic and available in a number of colour combinations. The sail area of for the standard Comet rig is slightly less than for the International Laser Standard. The mast is in two sections and is loose footed like the Laser rig.

The Autozam AZ-1, known by the framecode PG6SA, is a mid-engined kei-class sports car, designed and manufactured by Mazda under its Autozam brand. Suzuki provided the engine. Manufactured from October 1992 to 1994, the AZ-1 was noted for its gullwing doors. Power came from the same Suzuki-sourced 657 cc turbocharged engine used by the Mazda Carol that produced 64 PS (47 kW) at 6500 rpm and 85 N·m (63 lb·ft) at 4000 rpm.

Sandvik Coromant in Gimo, Sweden Today the village is dominated by the hard metal industry in the form of Sandvik Coromant, which employs approximately 1,500 (2019). Extremely hard metal blades are manufactured here and exported throughout the world. The blades are manufactured from powdered metal that is sintered together under high pressure. The company's activities are divided into two plants, one manufacturing the blades themselves and the other manufacturing the holders in which the blades are housed.

Building paper is manufactured from virgin kraft paper, unlike felts, and then impregnated with asphalt. The longer fibres in the kraft paper allow for a lighter weight product with similar and often better mechanical properties than felt. Grade papers are rated in minutes—the amount of time it takes for a moisture sensitive chemical indicator to change colour when a small boat-like sample is floated on water. Common grades include 10, 20, 30, and 60 minute.

The FNAB-43 is an Italian designed and developed submachine gun manufactured from 1943 to 1945. The first prototype was built in 1942 and the 7,000 built by the FNA-B (Fabbrica Nazionale d'Armi di Brescia, "Brescia National Arms Factory", hence the name) were issued to German and Italian RSI (Repubblica Sociale Italiana) units fighting in Northern Italy. The FNAB-43 was an expensive weapon to manufacture as it used extensive milling and precision engineering in its manufacture.

Midget Gems (or Midgetgems) are chewy, firm sweets similar to wine gums but much harder. They are manufactured from sugar and glucose syrup, corn starch and/or various other starches, animal gelatin, and various colourings and flavouring. Midget Gems were extremely popular in the North of England and were one of The Lion Confectionery Company's biggest selling brands. In 1995 the company joined forces with Cadbury Trebor Bassett brand Maynard's to market the sweet across the country.

The Mazda MX-5 (NA) (sold in Japan as the and in North America as the Mazda MX-5 Miata) is the first generation of the Mazda MX-5 manufactured from 1989 to 1997. Inspired by the post-war era British sports cars, the MX-5 rejuvenated interest in roadsters after the demise of cars such as the MG B and Triumph Spitfire. Since its debut, the MX-5 has won numerous automotive awards and has become the world's best selling sports car.

Flags are often representative of an individual's affinity or allegiance to a country, team or business and can be presented in various ways. A popular trend that has surfaced revolves around the idea of the 'mobile' flag in which an individual displays their particular flag of choice on their vehicle. These items are commonly referred to as car flags and are usually manufactured from high strength polyester material and are attached to a vehicle via a polypropylene pole and clip window attachment.

A snatch strap is a piece of equipment used to help in the recovery of vehicles bogged in sand or mud. Snatch straps are manufactured from webbing that is capable of approximately 20% stretch under load. This stretching property allows the strap to store kinetic energy, which is used to pull vehicles from a bog. Snatch straps are typically between 6 m (20 ft) and 15 m (50 ft) in length, with 9 m (30 ft) being a common size.

These bricks were based on the Kiddicraft Self-Locking Bricks, which had been patented in the United Kingdom in 1939 and released in 1947. Lego had received a sample of the Kiddicraft bricks from the supplier of an injection-molding machine that it purchased. The bricks, originally manufactured from cellulose acetate, were a development of the traditional stackable wooden blocks of the time. The Lego Group's motto, "only the best is good enough" (, literally "the best isn't excessively good") was created in 1936.

The Lego factory in Kladno, Czech Republic Lego injection moulding machines, made by the German company Arburg Since 1963, Lego pieces have been manufactured from a strong, resilient plastic known as acrylonitrile butadiene styrene (ABS). As of September 2008, Lego engineers use the NX CAD/CAM/CAE PLM software suite to model the elements. The software allows the parts to be optimised by way of mould flow and stress analysis. Prototype moulds are sometimes built before the design is committed to mass production.

The Lock Museum of America houses an extensive lock collection that includes 30 early era time locks, escutcheon plates from safes, a large number of British safe locks, door locks, padlocks, handcuffs and keys, and more. Located in Terryville, Connecticut, the museum is directly across from the original site of the Eagle Lock Company, founded in 1854. Major collections are displayed by company or theme. The Eagle Lock room contains over 1,000 locks and keys manufactured from 1854 to 1954.

Kotpad Handloom is a vegetable-dyed fabric woven by the tribal weavers of the Mirgan community of Kotpad village in Koraput district, Odisha, India. Cotton sarees with solid border and Pata Anchal, duppatta with typical Buties / motifs, Scolrfs on cotton, silk, handloom stoles, and dress materials are all dyed with organic dyes. The natural dye is manufactured from the aul tree grown in this area. The Kotpad tussar silk saree with tribal art and Kotpad handloom fabrics with natural color is its specialty.

Candles were also made from stearin (initially manufactured from animal fats but now produced almost exclusively from palm waxes). Today, most candles are made from paraffin wax, a byproduct of petroleum refining.Franz Willhöft and Fredrick Horn "Candles" in Ullmann's Encyclopedia of Industrial Chemistry, 2000, Wiley-VCH, Weinheim. Candles can also be made from microcrystalline wax, beeswax (a byproduct of honey collection), gel (a mixture of polymer and mineral oil), or some plant waxes (generally palm, carnauba, bayberry, or soybean wax).

The first BMW M5, based on the E28 5 Series, was manufactured from October 1984 to June 1988.BMW (ed): BMW M5, in BMW Group Archive. Retrieved 8 April 2019 It made its debut at the Amsterdam Motor Show in February 1985. It was based on the 535i chassis with various mechanical changes, most notably the M88/3 engine (shared with the E24 M635CSi grand tourer coupé) which was an updated version of the engine used in the M1 sports car.

The carbines used by the Arditi were the Carcano Moschetto 91 and Moschetto 91 TS. The Arditi also used 37 mm and 65 mm cannons against pillboxes and fortifications. In the Museo del Risorgimento in Turin, the hall is dedicated to the resistance against Fascism. There are on display a dagger and a hand grenade belonging to the Arditi del Popolo. Due to lack of resources the first daggers were manufactured from surplus stock of the bayonets from the Vetterli rifle.

Bowling alleys and bowling pins are both commonly manufactured from sugar maple. Trees with wavy woodgrain, which can occur in curly, quilted, and "birdseye maple" forms, are especially valued. Maple is also the wood used for basketball courts, including the floors used by the NBA, and it is a popular wood for baseball bats, along with white ash. In recent years, because white ash has become threatened by emerald ash borer, sugar maple wood has increasingly displaced it for baseball bat production.

Lacking polarizers, the guest host display substrates can be manufactured from low cost birefringent plastic films. And the plastic film substrates enable additional economies such as continuous R2R manufacturing (Roll to Roll manufacturing) of the displays, with its inherent economies over batch manufacturing processes. Continuous manufacturing of displays is described in U.S. Patents 4,228,574, 4,924,243, 4,094,058, and patents pending. In some cases, the R2R manufacturing of the guest host displays can be integrated with other roll to roll manufacturing process.

It was manufactured from 1991-2007. There was a Brazilian equivalent named XR 250 Tornado made from 2001 to 2009 (until 2012 for export) for the local market and regional exports to other South American countries but also available in Mexico and Central America. Its engine was the same 4-valve DOHC air-cooled single fitted to the CBX 250 Twister/CBF 250, but the exhaust was dimensioned to improve low-end torque with the sacrifice of 1hp resulting in a 23hp rating.

He first moved to the area 1780, living in a log house until 1781, when he built a frame house. In 1790 he negotiated the purchase of the territory that became Farmington, and was the owner of one of its early mills. He built this house, supposedly from bricks manufactured from clay gathered from the banks of the nearby Sandy River. The house has been little altered since its construction, the only significant alteration being the replacement of its windows.

Bio-Blend Fuels produce and sell 100% biodiesel (B100) manufactured from the raw materials by a process called transesterification. However, unblended biodiesel is problematic in that it tends to gel at a temperature of 32 °F or below. For this reason biodiesel sold for use in private vehicles is usually blended with petrodiesel, a common blend being 20% biodiesel to 80% petrodiesel (B20). A B20 blend gels at around 17 °F, a full 15 degrees below freezing and hence is much more reliable.

The energy content is about 4-4.2 kcal/kg and moisture content is typically less than 10%. The size of pellets is generally kept to be about 6 mm diameter and 25 mm length in the form of a cylinder; though larger cylinder or briquette forms are not uncommon. It is much cheaper than similar energy-pellets and can be compacted/manufactured from the husk at the farm itself, using cheap machinery. They generally are more environment- friendly as compared to wood-pellets.

For 2016 Pinarello updated their product line starting with new mid-level bikes up to models just below the Dogma Series. All GAN Series models take styling and design cues from the Dogma F8. The entry level GAN stems directly from the design efforts of the Dogma F8, whilst having a less 'extreme' style which aids riding comfort. The GAN Disk variant contains the same features as the GAN but also includes disk brakes, both models are manufactured from T600 carbon fibre.

The housing of the bell box may be manufactured from wood, metal, or plastic. The basic core component of a conventional bell box is an electromagnet and a bell or other metal part, some of which create a repetitive sound.Tom Harris, "How Doorbells Work", HowStuffWorks The bell sound is normally created inside the box, although the unit may have bells mounted on the outside of the box. The bell box may also include visual alerts such strobe or other flashing lights.

The gas part of the business supplied fuel for street and private lighting to the town.Keith Kissack, Victorian Monmouth, The Monmouth Historical and Educational trust, Until the 1930s the gas works were operated by the Monmouth Gas and Water Co. Ltd. The gas was manufactured from coal that was brought by railway. From some time before the Second World War, this gas works was owned along with other gas plants at Ross-on-Wye, Caldicot and Caerleon by the Severn Valley Gas Corporation.

Butter is a dairy product made from the fat and protein components of milk or cream. It is a semi-solid emulsion at room temperature, consisting of approximately 80% butterfat. It is used at room temperature as a spread, melted as a condiment, and used as an ingredient in baking, sauce making, pan frying, and other cooking procedures. Most frequently made from cow's milk, butter can also be manufactured from the milk of other mammals, including sheep, goats, buffalo, and yaks.

In 1838, production of the Model 1839 Carbine began in the Patent Arms Manufacturing Company's factory in Paterson, New Jersey. Production lasted until 1841, with a total of about 950 firearms produced (serial numbers 1–950). Model 1839 Shotguns were manufactured from 1839 to 1841, with between 225 and 262 guns produced (serial numbers 1–225 or 262). Approximately twenty- five variants of the Model 1839 Carbine were manufactured at some point during Patent Arms' tenure that featured an elongated cylinder.

The Canadian Motor was a Canadian electric car manufactured from 1900 until 1902. Billed as being "ideal for any first-class automobilist to drive", the cars could travel up to 45 miles on one change of their batteries. Although located in Toronto, the concern which built Canadian Motors was English-owned; models were derived from the first electrics manufactured in Canada, designed from 1893 by W. J. Still. Still designed a gasoline-powered car as well, a 5 hp model built in 1898.

The Photonic Fence can be manufactured from parts used in current generation consumer technology and is projected to be relatively low cost. Myhrvold believes it can be made for around $50 per unit; however, Intellectual Ventures does not intend to manufacture the units, but rather to come up with a final design.(Lorie, 2009) The prototype of the fence was built with parts bought on eBay. All three stages of the photonic fence can be made from this consumer technology.

During World War II, the Bronze font was hidden somewhere in Mecklenburg by the church staff to prevent it from being melted down for war material. ;St. Roch Altar The late gothic St. Roch altar is a side altar, of which there were once 39 in this church. Manufactured from oak wood in 1530, the master carver was likely part of the circle around carver Benedict Dreyer of Lübeck. In the centre of the shrine is the patron Saint Roch.

Other types of dry marker boards are also available, such as high gloss vinyl and coated paper, which can be rolled up, high-density two-part high gloss paints, glass and coated acrylics and polypropylene magic whiteboards which use static electricity to cling to walls, windows, and doors. Clear marker surfaces, made of glass (matte or glossy) or specially coated acrylic, became available around the mid-2000s. They are generally manufactured from technical glass, e.g. for monitor screen filters, which is optically coated.

The successful RC Racing car, 'Schumacher S.S.T.2000' The image shows the car without body kit or battery pack installed to allow for a clearer view. In 1984, Associated Electrics, Inc. of Costa Mesa, California introduced the RC10 off-road electric racer; this model was a departure from 'Associated Electrics' regular line of nitromethane-powered on-road race cars. Designed as a high-grade radio controlled car, the chassis of the RC10 buggy was manufactured from anodised, aircraft-grade aluminium alloy.

Lebkuchen with honey and exotic spices were already made in medieval Swiss monasteries. A 16th- century recipe from Lucerne is already very similar to the contemporary recipe, except that fewer spices were used. In Berne, the Lebkuchen is first recorded in early 19th century cookbooks. The sugar decorations are believed to have come into general use some time after sugar manufactured from mangelwurzel became widely affordable in the early 19th century, but around the turn of the 20th century at the latest.

The first-generation Carina was manufactured from December 1970, and sold at Toyota Store dealership channels in Japan, sharing its platform with the Toyota Celica sports coupe. Its European release took place in October 1971. Toyota was able to save development and tooling costs by building a family sedan and a sports car on the same platform and in the same factory. The Carina was a junior sedan and coupe to the larger Crown, and was similar sized to the Corona.

Brown later named the Huffington Post, London Times, and Vogue reviews as giving her a sense of validation. The suits are manufactured from a 4½ times chlorine resistant Italian fabric and feature 28 pieces in their construction (compared to four in a typical rashie). This structure is intended to "flatter and conceal", as a reviewer in The Times put it. The design went through eleven iterations before being finalised and is manufactured in a wide range of sizes: (Australian) sizes 6 to 18.

Smaller amounts of butadiene are used to make the nylon intermediate, adiponitrile, by the addition of a molecule of hydrogen cyanide to each of the double bonds in a process called hydrocyanation developed by DuPont. Other synthetic rubber materials such as chloroprene, and the solvent sulfolane are also manufactured from butadiene. Butadiene is used in the industrial production of 4-vinylcyclohexene via a Diels Alder dimerization reaction. Vinylcyclohexene is a common impurity found in butadiene upon storage due to dimerization.

The GJG was an American automobile manufactured from 1909 until 1914 by George John Grossman in White Plains, New York. It was assembled from imported components, which included a "Renault-type" 26 hp or 40 hp four-cylinder engine. The smaller-engined car was called the Junior and the larger the Senior and the latter was available with either "cruiser torpedo", "Carryall" or "pirate runabout" bodywork. Grossman closed the company in 1914 as he said it was no longer making money.

In 2009 Hill began his coaching career as a high school assistant football and basketball coach in the small rural city of Clewiston, located in the “Muck” area of Florida where at least 75% of the nation's sugar is manufactured. From there Hill was hired as the Offensive Coordinator at neighboring Moore Haven High School by Maurice Belser. Assisting with the play calling and installation of a spread-attack offense, that produced a school and area high of 66 points vs. St. Stephens.

Parts manufactured from sheet metal must maintain a uniform thickness for ideal results. There are many different metals that can be made into sheet metal, such as aluminium, brass, copper, steel, tin, nickel, and titanium. For decorative uses, some important sheet metals include silver, gold, and platinum (platinum sheet metal is also utilized as a catalyst). Sheet metal is used in automobile and truck (lorry) bodies, airplane fuselages and wings, medical tables, roofs for buildings (architecture), and many other applications.

Other changes that Ruger and Uziel Gal made to his original design included a change of materials used. The development of strong polymers through the years after the Second World War provoked the designers to change the materials used in the design. Therefore, the lower receiver and pistol grip of the MP9 are manufactured from Zytel (a strong and popular polymer at the time). The butt-stock is also made from a polymer, connected to the frame via a nylon hinge.

The Gibson L9-S Ripper is a model of electric bass guitar made by Gibson Guitar Corporation. The Ripper was designed by Bill Lawrence, and manufactured from 1973 until 1983, the peak year being 1976. Most had a maple body with laminated maple neck; however a significant number manufactured in 1975 had lighter alder bodies while retaining the maple neck. Also in 1975, an edgier and slimmer body, with more beveling and contours around the horns of the bass, was introduced.

Griswoldville also served as a mustering site for Confederate and state troops. The revolver produced at Griswoldville was called the Griswold and Grier Revolver, and later on called the Griswold Gunnison, after Arvin Nye Gunnison, Griswold's business partner. The Griswold Gunnison revolvers are copies of the Colt 1851 Navy revolver and were made with distinctive brass frames because of the shortage of steel in the South. Also typical of the Griswold is a cylinder manufactured from twisted iron instead of steel.

The Reliant Regal was a small three-wheeled car and van manufactured from 1953 to 1973 by the Reliant Motor Company in Tamworth, England, replacing the earlier Reliant Regent three-wheeled cyclecar van. As a three-wheeled vehicle having a lightweight (under 7 cwt, 355.6 kg) construction, under UK law it is considered a "tricycle" and can be driven on a full (class A) motorcycle licence. A light-commercial version with a side-hinged rear door was marketed as the Reliant Supervan.

Although today the shape is generally in the form of an equilateral triangle, early instruments were often formed as non-equilateral isosceles triangles. In the early days the triangles did not have an opening and had jingling rings along the lower side. Early examples of triangles include ornamental work at the open end, often in a scroll pattern. Historically, the triangle has been manufactured from a solid iron and later steel rod and bent into a triangular shape roughly equilateral.

Due to the Solothurn company being unsuited for mass production, Rheinmetall took a controlling interest in Waffenfabrik Steyr, an established arms manufacturer in Austria. Weapons manufactured by Steyr were sold via the Zurich-based trade company Steyr-Solothurn Waffen AG to both the commercial and military markets. The MP 34 was manufactured from the very best materials available and finished to the highest possible standard. It was so well manufactured that it has often been nicknamed the "Rolls Royce of submachine guns".

Mutoscopes were originally manufactured from 1895 to 1909 for the American Mutoscope Company, later American Mutoscope and Biograph Company (1899) by the Marvin & Casler Co., Canastota, New York formed by two of the founding Managers of American Mutoscope Company. In the 1920s the Mutoscope was licensed to William Rabkin who started his own company, the International Mutoscope Reel Company, which manufactured new reels and also machines from 1926 until 1949. The term "Mutoscope" is no longer a registered trademark in the United States.

The Martin D-45 is a steel-string acoustic guitar model made by C. F. Martin & Company. The model was manufactured from 1933 to 1942, and in a second production series since 1968. Martin originally made the guitar's sides and backs of Brazilian rosewood. Martins are ranked among the highest-quality, as well as among the most expensive guitars, and the D-45, regarded as one of the first "luxury guitars", was listed in 2011 as the most valuable production- model guitar.

The 109Es were supplemented by eight aircraft licence manufactured from spare parts by Doflug at Altenrhein, delivered in 1944. In April 1944, 12 further G-6s were acquired in exchange for the destruction of a highly secret Messerschmitt Bf 110G night fighter which made an emergency landing in Switzerland. The new 109Gs suffered from numerous manufacturing defects and after problematic service were withdrawn from use by May 1948. The 109Es continued in service until December 1949.Osché, Philippe (translated by Laureau, Patrick) 1996.

The maximum permitted weight is 737 grams.Rules of Hockey 2015-2016 The majority of players use a stick in the range 19 oz to 22 oz (538 g - 623 g). Traditionally hockey sticks were made of hickory, ash or mulberry wood with the head of the sticks being hand carved and therefore required skilled craftsmen to produce. Sticks made of wood continue to be made but the higher grade sticks are now manufactured from composite materials which were first permitted after 1992.

American ad 1921 The American was an American automobile, built in Plainfield, New Jersey, manufactured from 1917 to 1924. The company also used names American Balanced Six or American Six, "Balanced" referred to its chassis, not the engine. It was an assembled car, one of many built in its time, and it used components from several manufacturers like Borg & Beck for clutch, Warner transmission, Stromberg carburetor and Rutenber engines. The company was never large; its peak production was 1400 vehicles built in 1920.

The manufacture of wrappers for the sending of newspapers or periodicals began in the U.S. in 1861. The first wrappers were rectangular pieces of paper with gum to seal it on one end and an embossed envelope stamp or indicium on it. By 1870, the form was that of a rectangle with the narrow side rounded and gummed at the top. They were manufactured from piles of 300 - 500 sheets of paper which were then cut to shape by a knife.

The Nikon F6 is a 35 mm film single-lens reflex camera body that became commercially available during 2004, and is the sixth top-of-the-line professional film camera in Nikon's line since the introduction of the Nikon F in 1959. The Nikon F6 is designed by Nikon and was manufactured at their Sendai Plant. The F6 is the most recent model of Nikon's F series being discontinued in October, 2020 . It replaced the Nikon F5, manufactured from 1996 to 2004.

Tweed, an end product manufactured from the Boreray's wool. The Boreray, also known as the Boreray Blackface or Hebridean Blackface, is a breed of sheep originating on the St Kilda archipelago off the west coast of Scotland and surviving as a feral animal on one of the islands, Boreray. The breed was once reared for meat and wool, but is now used mainly for conservation grazing. The Boreray is one of the Northern European short-tailed sheep group of breeds.

General chemical structure of cocamide where n = 6, 8, 10, 12, 14, 16 Cocamide is a mixture of amides manufactured from the fatty acids obtained from coconut oil. As coconut oil contains about 50% of lauric acid, in formulas only the 12-carbon chains tend to be considered. Therefore the formula of cocamide can be written as 3(CH2)10CH2, though the number of carbon atoms in the chains varies (it is always even). Cocamide is the structural basis of many surfactants.

The Zwillinge offered Mallet locomotive performance through tight curves, but damage to one unit would not disable the second. One-hundred-eighty-two Zwillinge were manufactured from 1890 to 1903, and shortcomings were evaluated in German South West Africa and China's Boxer Rebellion. An 0-8-0T Brigadelok design with Klien-Lindner articulation of the front and rear axles was adopted as the new military standard in 1901. Approximately 250 were available by 1914, and over two thousand were produced during the war.

1913 Arden 8-96 hp The Arden was a British automobile manufactured from 1912 to 1916 in Balsall Common, near Coventry. Starting out as a light and somewhat crude cyclecar, by the time production finished four years later, it had grown into a well-made four-cylinder car, featuring full four-seater coachwork. The first model in 1912 was a 8 hp V-twin, air-cooled, 898 cc JAP-engined cyclecar with a wooden chassis. This continued in production until 1915.

Because the charging voltage is higher than the discharge voltage, the watt-hour efficiency of a silver-cadmium cell is about 70%; ampere-hour efficiency is about 98%. The usual recommended charging method is constant-current charging at a 10 or 20 hour rate, (restoring the capacity of the battery over 10 or 20 hours), and cut off of charging at 1.6 volts per cell. Cells are commercially manufactured from 2 to 2500 ampere-hours capacity, but are often customized for particular uses.

The NSU/Fiat Weinsberg 500 (1960 Neckar Weinsberg 500 ) is a Fiat automobile. It was produced in two versions (Limousette and Coupé) based on the Fiat 500 (1957–1977). Like the Neckar Pully, the Weinsberg was the creation of NSU/FIAT Karosseriewerke Weinsberg, made possible because NSU/FIAT in Heilbronn also had its own development department, in which designers such as Antonio Fessia worked. Introduced in March 1959 as the NSU/Fiat, 6,228 vehicles were manufactured from 1959 to 1963.

Moreover, in 2016 the 124 spider made its first appearance: it was previously seen at 2015 LA Auto Show. The two passenger roadster recalls, for name and exterior styling, the Fiat 124 Sport Spider designed by Pininfarina and manufactured from 1966 to 1985. In 2019 the electric Fiat Concept Centoventi, translated as hundred and twenty in recognition of the company's 120th anniversary, was unveiled at the Geneve Motor Show. It “reimagines the Fiat Panda supermini as an electric car for the 21st century”.

Diners differ from restaurants in the sense that they were set up as prefabricated buildings, mostly manufactured from aluminum or stainless steel. Less expensive to buy because of their prefabricated nature, they were manufactured in assembly plants, with different manufacturers having different styles, and could be purchased and set up quickly once land was obtained by the buyers. Also, they could be picked up and moved from one location to another. Large outdoor signs, mostly using neon, advertised the facility along the highway.

These shields are typically manufactured from advanced synthetics such as Kevlar and are designed to be bulletproof, or at least bullet resistant. Two types of shields are available: # Light weight level IIIA shields that stop hand guns and submachine guns. # Heavy Level III and IV shields that stop rifle rounds. Tactical shields often have a firing port so that the officer holding the shield can fire a weapon while being protected by the shield, and they often have a bulletproof glass viewing port.

The Autobianchi Y10 is a 'designer' city car and economy car manufactured from 1985 to 1995 and marketed under the Lancia brand in most export markets (as Lancia Y10). The car was manufactured at Fiat's Autobianchi plant in Desio, Milan until 1992 and after that in Arese, near Alfa Romeo's plants. It offered a very high level of trim for its market segment. The Y10 featured a new rear rigid axle suspension design (called Omega axle) that was subsequently fitted to the facelifted Fiat Panda.

The Syrena was a Polish automobile model first exhibited at the Poznań Trade Fair in 1955 and manufactured from 1957 to 1972 by the Fabryka Samochodów Osobowych (FSO) in Warsaw and from 1972 to 1983 by Fabryka Samochodów Małolitrażowych (FSM) in Bielsko-Biała. 177,234 were manufactured by FSO and 344,077 by FSM, a total of 521,311. During its remarkably long production run it underwent only minor modifications. The Syrena was produced in various models: 100, 101, 102, 103, 104, while the most popular model was the 105.

The BMW 3/20 PS was the first BMW automobile designed entirely by BMW. It was manufactured from 1932 to 1934, replacing the 3/15 model that was initially an Austin 7 manufactured under licence from the Austin Motor Company. BMW 3/20 AM 4 engine The engine used in the 3/20 was based on the Austin Seven engine used in the 3/15, but its crankshaft ran in plain bearings instead of roller bearings and had an stroke, generating a displacement of .Norbye, p.

It has the same reeds as a Marine Band, but it has a plastic comb instead of a wooden comb, and rounded edges. It was the first Hohner harmonica to have a plastic comb, which not only made the instrument more airtight, but also eliminated the swelling wood combs go through as they moisten from use. Made in Germany, this model quickly became the preferred choice of many rock and blues players. Now, most harmonicas being manufactured from all companies are based upon the Special 20.

That same year he filed a patent for the industrial method of producing the first botanical product based on OPCs. Based on Masquelier's role in the research and development of OPCs-products, their isolation, identification and therapeutic and dietary applications, two other botanical products followed. In the 1960s, a botanical medicine based on OPCs isolated from Pinus maritima bark was produced, followed ten years later by another OPCs-based medicinal product manufactured from Vitis vinifera seeds. These medicinal products are still sold in France today.

The various enclosures acts, with the consequent removal of common rights and the vesting of control in the landowners, paved the way for subsequent commercial extraction of the peat on the mosses. This began in 1851, when a "company of gentlemen", named Vardy & Co., leased from the Hanmer Estate. They intended to erect a works, where useful products would be manufactured from the peat. On 5 May 1856, Joseph Bebb took over the lease, to which was added another , for a period of 21 years.

TMK plants produce almost the entire range of existing pipes used in the oil- and-gas sector, the chemical and petrochemical industries, energy and machine- building, construction and municipal housing, shipbuilding, aviation and aerospace, and agriculture. TMK pipes are manufactured from carbon, stainless, and heat and cold-resistant steels, nickel alloys. TMK delivers its products along with an extensive package of services in heat treating, protective coating, premium connections threading, warehousing and pipe repairing. TMK's global market presence is supported by its extensive international distribution network.

Other possible (though unconfirmed) recordings include Kurt Memo's single "Piano Bar" which was recorded in Germany around the same time. It is unknown for certain if Tangerine Dream - "Loop Mellotron" (credited to Christopher Franke) on the late 1970s albums Stratosfear (1976) and Cyclone (1978) is a reference to Birotron #005 or to their Mellotron T550 model which contained looped tapes they made themselves. The Mellotron T550 model was apparently manufactured from 1981 to 1983. If the manufacturing dates are accurate then the Birotron is the "Loop Mellotron".

Still requiring a source of tax revenue, alcohol manufactured from local raw materials such as agave was encouraged instead. The drinking of alcoholic beverages such as pulque was strongly restricted in the pre-Hispanic period. Taboos against drinking to excess fell away after the conquest, resulting in problems with public drunkenness and disorder. This conflicted with the government's need for the tax revenue generated by sales, leading to long intervals promoting manufacturing and consumption, punctuated by brief periods of severe restrictions and outright prohibition.

M41s on the assembly line at the Cleveland Tank Plant, the Cadillac factory where they were manufactured from 1951 to 1954. The hull of the M41 is of welded steel construction, with the driving compartment located at the front of the tank and to the left. This may be accessed through the hull by a single piece hatch cover opening to the right. When the hatch is closed, the tank is navigated by three driving periscopes mounted forward of the driver's position and one to the left.

The HC 91 had a modified keyboard with 50 keys instead of 40. It had 64 KB RAM and extra circuitry which provided CP/M support, if the Interface 1 extension was also present. The HC 2000 (manufactured from 1992–94) had a built-in 3.5-inch 720 KB disk, and 64 KB RAM, it could be used both as a Spectrum clone with added disk functionality (only 48 KB RAM available) or in CP/M mode, giving access to the full 64 KB memory.

The American Thermos Bottle Company Laurel Hill Plant, located in the Laurel Hill section of Norwich, Connecticut, in the United States, includes 11 contributing buildings and two other contributing structures. The original plant was built during 1912–13 and used a historic Italianate house as a company office building. The plant was the primary factory where Thermos brand vacuum flask bottles were manufactured from 1913 to 1984. The plant is historically significant to its connection to the Thermos Company and the history of Norwich.

Front view of the same machine (2016) Side view As early as 1955, a series of prototypes of a heavy wheeled bulldozer were built and tested, which at that time were still known as the MAZ-528. It is not clear exactly when the designation changed to MAZ-538, or why the change was made. However, it is known that the machines were manufactured from 1964 under the name MAZ-538 in series production. As early as 1965, other factories began producing different variants of the vehicle.

The eagle was the base-unit of denomination in gold although, unlike "cent", "dime" (or "disme"), and "dollar", gold coins never specified their denomination in units of "eagles". Thus, a double eagle showed its value as "twenty dollars" rather than "two eagles". The United States' circulating eagle denomination from the late 18th century to first third of the 20th century should not be confused with the American Eagle bullion coins which are manufactured from silver or gold (since 1986), platinum (since 1997), or palladium (since 2017).

The Alfa Romeo Alfasud (Type 901, 902 and 904) is a small family car that was manufactured from 1971 to 1989 by Industria Napoletana Costruzioni Autoveicoli Alfa Romeo-Alfasud S.p.A of Italy, a new company owned by Alfa Romeo and Finmeccanica. As the entry-level car by Alfa Romeo, it was launched at the cost of $3000 in 1971, is now $19000 after inflation. The company was based in the southern region of Italy as a part of the labour policy of the government.

Molds are typically manufactured from stainless steel or aluminum. Aluminum molds are usually much thicker than an equivalent steel mold, as it is a softer metal. This thickness does not affect cycle times significantly since aluminum's thermal conductivity is many times greater than steel. Due to the need to develop a model prior to casting, cast molds tend to have additional costs associated with the manufacturing of the tooling, whereas fabricated steel or aluminum molds, particularly when used for less complex parts, are less expensive.

The Ferguson TE20 is an agricultural tractor designed by Harry Ferguson. By far his most successful design, it was manufactured from 1946 until 1956, and was commonly known as the Little Grey Fergie. It marked a major advance in tractor design, distinguished by lightweight, small size, manoeuvrability and versatility. The TE20 popularised Harry Ferguson's invention of the hydraulic three-point hitch system around the world, and the system quickly became an international standard for tractors of all makes and sizes that has remained to this day.

He also has the Plamonsters which he later gives to Mayu and . His magic circle when using the Magic Rings reflect the lunar phases of the moon. Assuming the form of , an Phantom he artificially created from a combination of magic and science in order to become a magician upon absorbing the creature, Fueki can use his Phantom physiology to produce Magic Stones from which the Wizard Rings are manufactured from. In March 2014, Uchusen magazine will run a special photographic retrospective on Kamen Rider Wizard.

This was AMC's first V8 engine designed and manufactured from 1956 to 1967. American Motors' president, George W. Mason, negotiated a verbal agreement with Packard that the two companies would supply parts for each other when practical. This was a prelude to a possible merger of the two companies at a later date, but that never occurred. With the industry-wide acceptance of V8 engine designs after World War II, AMC started buying Packard V8s in 1954 for the 1955 Nash Ambassador and Hudson Hornet.

The dynamic pressure sensor developed by Oxsensis Ltd, functions as a low finesse Fabry–Pérot cavity which is sensitive to changes in pressure. This cavity is manufactured from sapphire, which has a melting point of . Indeed, the Youngs modulus of the sapphire retains the required stiffness to allow the Fabry–Pérot cavity to function up to temperatures of around . The light that is used to interrogate the cavity is generated in an interrogator unit and passes between this and the sensor via standard silica optical fiber.

The Corona Coupé remained exclusive to Toyopet Store Japanese dealerships along with the larger, all new Toyota Soarer, while the Celica liftback and convertible remained at Toyota Corolla Store locations. The Corona Coupé was manufactured from 1985 until 1989. In 1994 it was belatedly replaced by the Toyota Curren and sold at Toyota Vista Store locations. The Corona Coupé came with three engines; the SOHC 1.8-litre 1S-iLU and two twin-cams, the 1.6-litre 4A-GELU or the 2-litre 3S-GELU.

StadiArena is an air-conditioned pillar less multipurpose indoor arena with over 32,000 sq. feet area. The stadium is also equipped with the T-Box facility which provides retractable seating system which enables 5,000 seats to convert from the outdoor arena to indoor arena. It is equipped with world's only turf protection system which gets manufactured from truly translucent HDPE material, it allows for continues photosynthesis while at the same time ensures the optimal turf health, together with a 30 years UV degradation guarantee.

The Oldsmobile Intrigue is a mid-size sedan that was manufactured from 1997 through 2002 by Oldsmobile. The Intrigue's design cues were first seen in 1995 with the Oldsmobile Antares concept car, being unveiled in production form in January 1996 at the North American International Auto Show. The Intrigue was the first casualty in the three-year phase-out process of Oldsmobile; Olds' remaining models would last an additional year or two. The Oldsmobile Intrigue was introduced on May 5, 1997 as a 1998 model.

Haglof increment borer An increment borer is a specialized tool used to extract a section of wood tissue from a living tree with relatively minor injury to the plant itself. The tool consists of a handle, an auger bit and a small, half circular metal tray ( the core extractor) that fits into the auger bit; the last is usually manufactured from carbide steel. It is most often used by foresters, researchers and scientists to determine the age of a tree. This science is also called dendrochronology.

The Hotchkiss rapid fire 37 mm multi-barrel gun "canon-revolver", manufactured from 1879. Despite such improvements in longer- range artillery, there still remained a need to develop better short- and medium-range infantry support weapons. During the period from 1871 to the 1890s, a variety of new European- and American-designed manual machine guns were adopted by many European armies. Large numbers of Gatling guns were purchased from the United States and were used by Western European powers in colonial wars in Africa, India, and Asia.

Almond milk is a plant milk manufactured from almonds with a creamy texture and nutty flavor, although some types or brands are flavored in imitation of dairy milk. It does not contain cholesterol, saturated fat or lactose, and is often consumed by those who are lactose-intolerant and others, such as vegans, who avoid dairy product. Commercial almond milk comes in sweetened, unsweetened, vanilla and chocolate flavors, and is usually fortified with micronutrients. It can also be made at home using a blender, almonds and water.

This transmission was manufactured at the Fairfax Transmission Plant, freeing up capacity at Livonia for the new C6. The FMX was manufactured from 1968 to 1979, when the Fairfax Transmission plant was closed. Although the FMX was phased out in the United States in 1979 in favor of Ford's then-revolutionary Automatic OverDrive (AOD) transmission, the FMX was sold for another four years for use in V8 Ford Falcons built in Australia. The FMX ceased production when Ford Australia phased out the V8 engine in 1983.

The Honda XLV750R is a dual-sport motorcycle manufactured from 1983 to 1986 by Honda Motor Company, Japan. A first prototype of the motorcycle was introduced to the public at the Paris Motor Show in October 1982. The XLV was initially intended for the European market only (with the exception of the UK), but from 1985 on, it was also sold in Australia and New Zealand. In the first production run in 1983, 500 "Limited Edition"-models were produced for the Japanese home market.

The intakes are manufactured from titanium. The interstage is mounted between the gas-generator and the ramcombustor and contains the Motor Safety Ignition Unit (MSIU), the booster igniter, and the gas generator control valve. The gas generator is ignited by the hot gases from the booster combustion which flow through the open control valve. The gas generator contains an oxygen deficient composite solid propellant which produces a hot, fuel-rich gas which auto-ignites in the air which has been decelerated and compressed by the intakes.

To close the bolt with an empty magazine, the follower had to be depressed to clear the bolt stop. The iron sights included a tangent V-notch rear sight that was graduated from to . Later rifles, manufactured from May 1906 onward, received a modernized rear sight, and a third version of the rear sight was adopted in 1913 after an improved 7 mm round, which had the significantly higher muzzle velocity of , was adopted. The barreled receiver was fitted with a wood stock with a straight grip.

In 1927, E. L. Bruce, owner of the E. L. Bruce Company in Memphis, Tennessee, wanted to find a way to protect the hardwood floors they manufactured from damage by termites and founded the Bruce Terminix Research Laboratory. In 1932, senior chemist Frank Lyons created the first termiticide, an insecticide specifically designed to kill termites. The company began to franchise under the name Bruce Terminix. In 1955, Terminix was the first company to offer a termite protection contract, with annual inspections and a guarantee.

One of the prop Orbs was used for stunts and had retractable rods. A second version was manufactured from cast bronze, making it heavy: "You really didn't want to have to handle it," Campbell said. The rocket car seen in the pilot episode was built by special effects coordinator Kam Cooney and was a working vehicle with an internal combustion engine and throttle controls. Some items used in the show had been repurposed from older productions, and some would later be used in other shows.

Early in the town's history, pottery became an important part of Greensboro's economic base, with the first operation owned and operated by Alexander Vance. Vance settled in Greensboro in the early 19th century, while still very young, and began a small pottery trade operation with his brother James. The stoneware was manufactured from local red clay and had a very distinctive coloring. The Vances eventually began to expand their operations, bringing in David Boughner, who took over the business in 1819 when the Vances left for Ohio.

The round nose chisel is used for cutting semi-circular grooves for oil ways in bearings. The diamond point chisel is used for cleaning out corners or difficult places and pulling over centre punch marks wrongly placed for drilling. Although the vast majority of cold chisels are made of steel, a few are manufactured from beryllium copper, for use in special situations where non-sparking tools are required. Cold Chisels are predominantly used in Repoussé and chasing processes for the fabrication of bronze and aluminium sculptures.

Earl Corey had lived on a Virginia plantation, a rich man, who returned after the war to find his plantation untouched, everything just as he left it - but now in the hands of his pro-Union brother whom Corey, and other Southerners, considered a traitor. With the Union army and the carpetbaggers now in charge, Corey found himself with nothing. Jemal David, on the other hand, had been a slave who had never owned anything. Even his name was manufactured from a bottle of hair tonic.

Mastigonemes are manufactured from glycoproteins in the cell's endoplasmic reticulum before being transported to the anterior flagella's surface. When the straminipilous flagellum moves, the mastigonemes create a retrograde current, pulling the cell through the water or bringing in food. The mastigonemes have a peculiar tripartite structure, which may be taken as the defining characteristic of the heterokonts, thereby including a few protists that do not produce cells with the typical heterokont form. Mastigonemes have been lost in a few heterkont lines, most notably the diatoms.

The Ligier JS4 is a four-wheeled, two-seater microcar manufactured from 1980 to 1983 by Ligier, the street vehicle branch of French Formula One manufacturer Equipe Ligier. It marked a change in Ligier's priorities as they had recently ended manufacture of the Ligier JS2 sports car. It is a "Voiture sans permis", a light vehicle which did not require a driver's license and was thus popular with the elderly, the young, or with those who had lost theirs. It was first presented on 25 July 1980.

The traditional toboggan is made of bound, parallel wood slats, all bent up and backwards at the front to form a recumbent 'J' shape. A thin rope is run across the edge of end of the curved front to provide rudimentary steering. The frontmost rider places their feet in the curved front space and sits on the flat bed; any others sit behind them and grasp the waist of the person before them. Modern recreational toboggans are typically manufactured from wood or plastic or aluminum.

The High Country Mustangs were manufactured from 1966 (333), 1967 (400) and 1968 (251), as a special promotion vehicle for Colorado- area Ford dealers, the first two years of High Country Specials were little more than special exterior colors and a triangular HCS emblem for all body styles. For '68, the HCS became a hardtop only and borrowed the front foglights, sidescoops, and Shelby rear end treatments as to not to be confused with the Challenger Special of 1968 that only came with a standard tail housing.

The BMW M2B15 was BMW's first flat-twin engine. Manufactured from 1920 to 1923, the M2B15 was intended to be a portable industrial engine, but it was used by several German motorcycle manufacturers to power their motorcycles. In 1920, BMW engineer Max Friz reverse-engineered the engine of foreman Martin Stolle's 1914 Douglas motorcycle and developed a similar 500 cc side-valve flat engine from it. This was referred to internally as the Type M2B15 and offered for sale officially as the "Bayern Motor".

Allied subsequently moved to Seattle, Washington in the early 1940s and then to southern California in 1962, whereupon it was renamed California Clock Company. The clock's design has changed little in the intervening years, with the first generation, manufactured from the 1930s–early 1950s having two paws and no bow tie, and newer models having four paws and a bow tie. In the 1960s genuine crystals were added as accents to some clocks. The words "Kit-Cat" were added to the clock's face in 1982.

Three years prior to the FDA's approval, scientists were investigating a phenomenon in which chickens who were rooting through bacteria-rich manure were displaying signs of greater health than those who did not. Through testing, it was discovered that chickens who were fed a variety of vitamin B12 manufactured with the residue of a certain antibiotic grew 50 percent faster than those chickens who were fed B12 manufactured from a different source.Ogle, Maureen. “Riots, Rage, and Resistance: A Brief History of How Antibiotics Arrived on the Farm”.

It is typically labelled on food packages as "color", "tartrazine", or "E102". In the United States, because of concerns about possible health problems related to intolerance to tartrazine, its presence must be declared on food and drug product labels.CFR 74.1705, 21 CFR 201.20 Another popular synthetic yellow coloring is Sunset Yellow FCF (also known as orange yellow S, FD&C; yellow 6 and C.I. 15985) It is manufactured from aromatic hydrocarbons from petroleum. When added to foods sold in Europe, it is denoted by E number E110.

Various thread protectors A thread protector is used to protect the threads of a pipe during transportation and storage. Thread protectors are generally manufactured from plastic or steel and can be applied to the pipe manually or automatically (by machine). Thread protectors are used frequently in the oil and gas industry to protect pipes during transportation to the oil and gas fields. Metal thread protectors can be cleaned and re-used, while plastic thread protectors are often collected and either re-used or recycled.

The Eagle Premier is a full-size executive car that was developed by American Motors Corporation (AMC) during the 1980s through its partnership with Renault. This model was manufactured in the brand-new Brampton Assembly in Canada. Chrysler Corporation bought the rights to the Premier when it acquired Renault's outstanding shares in AMC in 1987, and began selling the car under the new Eagle marque. The four-door sedan was manufactured from September 1987 (for the 1988 model year) until December 1991 (for the 1992 model year).

The Colt New Police was manufactured from 1896 to 1907 by Colt's Manufacturing Company of Hartford, Connecticut. The sights on the revolver were fixed with a round blade in front and a grooved rear sight. The revolver was available with a -inch, four-inch, or six-inch barrel in a blued or nickel finish and hard rubber grips. The Colt New Police was selected by New York City (NYPD) Police Commissioner Theodore Roosevelt in 1896 to be the first standard-issue revolver for NYPD officers.

Furnace-lining bricks have been manufactured from local quartz sand at Harborough brickworks for many years (recently by Hobens Minerals and previously by Swan Ratcliffe). Most of the White Peak is a carboniferous limestone plateau. This unusual jagged outcrop of dolomitic limestone offers interesting buttresses, arêtes and pinnacles for rock climbing (and some easy bouldering) with over 100 graded routes. Nearby Rainster Rocks is another dolomitic limestone crag and is the site of a Romano-British settlement and field system from the 3rd century.

The basic tool used is the kayendo,Also spelled kajandu, kajendo, kadiendo, or kadiandou a kind of wooden spade or shovel ranging from , surrounded by a sharp wrought iron blade and attached to a very long, straight, cylindrical neck. The two parts are connected by strips of torn Palmyra palm leaves. The main part is manufactured from a very hard wood measuring in length. The kayendo is mainly used to plough rice fields, but is also used for other purposes, such as excavation and construction.

The draft of a chimney was also used by Thomas Edison as what has been called the "first fume hood". The first known modern "fume cupboard" design with rising sashes was introduced at the University of Leeds in 1923. Modern fume hoods are distinguished by methods of regulating air flow independently of combustion, improving efficiency and potentially removing volatile chemicals from exposure to flame. Fume hoods were originally manufactured from wood, but during the 1970s and 1980s epoxy powder-coated steel became the norm.

Sam Bat, officially The Original Maple Bat Corporation, is a Canadian company based in the town of Carleton Place, Ontario that manufactures baseball bats. It was the first company to supply baseball bats manufactured from maple wood to professional baseball players. As of 2013, it is one of 32 licensed baseball bat suppliers for Major League Baseball (MLB) and Minor League Baseball (MiLB) players. It is also a bat supplier for baseball leagues throughout the world, including Germany, Japan, Korea, Italy, Mexico, and the Netherlands.

A future way to reduce waste accumulation is to phase out current reactors in favor of Generation IV reactors, which output less waste per power generated. Fast reactors such as BN-800 in Russia are also able to consume MOX fuel that is manufactured from recycled spent fuel from traditional reactors. The UK's Nuclear Decommissioning Authority published a position paper in 2014 on the progress on approaches to the management of separated plutonium, which summarises the conclusions of the work that NDA shared with UK government.

The MAS Modèle 36 (also known as the Fusil à répétition 7 mm 5 M. 36) is a military bolt-action rifle. First adopted in 1936 by France and intended to replace the Berthier and Lebel series of service rifles, it saw service long past the World War II period. It was manufactured from late 1937 onward by Manufacture d'Armes de Saint-Étienne (MAS), one of several government-owned arms factories in France. Only 250,000 MAS-36 rifles were available to equip the French infantry during the Battle of France in 1940.

In 14th century London, the demand for Coarse Border ware grew rapidly as demand for Kingston-type ware diminished. At the end of the 14th century, the Kingston- type pottery industry was in decline; By the early 15th century, Kingston-type ware was no longer used in London. Coarse Border ware continued to be the most widely used pottery in London from the mid 14th to the mid 15th century. Cheam whiteware, named for the pottery manufactured from kilns at Cheam, was first seen in London in the late 14th century.

Animal charcoal or bone black is the carbonaceous residue obtained by the dry distillation of bones. It contains only about 10% carbon, the remaining being calcium and magnesium phosphates (80%) and other inorganic material originally present in the bones. It is generally manufactured from the residues obtained in the glue and gelatin industries. Its decolorizing power was applied in 1812 by Derosne to the clarification of the syrups obtained in sugar refining; but its use in this direction has now greatly diminished, owing to the introduction of more active and easily managed reagents.

A third order of 96 cars was dated 3 February 1939; it was intended to raise eight squadrons in Africa of sixteen vehicles each. The first of these orders was only notified on 26 May 1939. Construction on the vehicles started in December but had to be halted due to a lack of the special radiators, 161 of which had only been ordered on 10 October; eventually they were manufactured from the second week of May 1940, at this time forming the main bulk of Panhard 178 production: 78 were delivered that month.

The machined receiver is manufactured from lightweight Ergal 55 alloy and is drilled and tapped for scope mounting. Three of the four variants were sold with an attached Picatinny rail for mounting optics or accessories and the bottom forward edge of the forend is also drilled to accept an accessory rail. With the exception of the short-barreled model, FABARM shotguns are sold with their Tribore barrel which is a deep-drilled, machined barrel with three separate internal bore profiles. Beginning at the chamber and forcing cone, the bore is enlarged to .

Each of these processes leads to coalescence or merging of steel components into pipes. Electric current is passed through the surfaces that have to be welded together; as the components being welded together resist the electric current, heat is generated which forms the weld. Pools of molten metal are formed where the two surfaces are connected as a strong electric current is passed through the metal; these pools of molten metal form the weld that binds the two abutted components. ERW pipes are manufactured from the longitudinal welding of steel.

2007 to 05.01.2009. However there have been frequent reports of timing chain failure in 1, 3 and 5 series BMW engines manufactured from as early as 2004 until at least 2011 in both the petrol and diesel versions (and hence not just necessarily in the N47 engine). At times the failure has resulted in a dangerous cut out of the engine while the vehicle was being driven - sometimes at relatively high speed. A "Quality Enhancement" was issued by BMW for some, but not all vehicles, but has since been discontinued.

Activated alumina Activated alumina is manufactured from aluminium hydroxide by dehydroxylating it in a way that produces a highly porous material; this material can have a surface area significantly over 200 m²/g. The compound is used as a desiccant (to keep things dry by absorbing water from the air) and as a filter of fluoride, arsenic and selenium in drinking water. It is made of aluminium oxide (alumina; Al2O3). It has a very high surface-area-to-weight ratio, due to the many "tunnel like" pores that it has.

In North America, this arrangement is often referred to as simply a backhoe, or when on a chassis originally derived from farm tractors, a tractor loader backhoe (TLB). To differentiate, a backhoe on its own dedicated chassis may then be referred to as an excavator. Backhoe loaders can be designed and manufactured from the start as such, or can be the result of a farm tractor equipped with a front end loader (FEL) and rear backhoe. Though similar looking, the purpose-designed backhoe loaders are much stronger, with the farm variation unsuitable for heavy work.

Grating monochromators disperse ultraviolet, visible, and infrared radiation typically using replica gratings, which are manufactured from a master grating. A master grating consists of a hard, optically flat, surface that has a large number of parallel and closely spaced grooves. The construction of a master grating is a long, expensive process because the grooves must be of identical size, exactly parallel, and equally spaced over the length of the grating (3–10 cm). A grating for the ultraviolet and visible region typically has 300–2000 grooves/mm, however 1200–1400 grooves/mm is most common.

A Hoover 0307, manufactured from 1947 to 1957 After the attack on Pearl Harbor, US domestic washer production was suspended for the duration of World War II in favor of manufacturing war material. However, numerous US appliance manufacturers were given permission to undertake the research and development of washers during the war years. Many took the opportunity to develop automatic machines, realizing that these represented the future for the industry. A large number of US manufacturers introduced competing automatic machines (mainly of the top-loading type) in the late 1940s and early 1950s.

Conjugated estrogens (CEs), or conjugated equine estrogens (CEEs), sold under the brand name Premarin among others, is an estrogen medication which is used in menopausal hormone therapy and for various other indications. It is a mixture of the sodium salts of estrogen conjugates found in horses, such as estrone sulfate and equilin sulfate. CEEs are available in the form of both natural preparations manufactured from the urine of pregnant mares and fully synthetic replications of the natural preparations. They are formulated both alone and in combination with progestins such as medroxyprogesterone acetate.

The major brand name of the natural form of CEEs manufactured from the urine of pregnant mares is Premarin. Major brand names of fully synthetic versions of CEEs include Cenestin and Enjuvia in the United States and C.E.S. and Congest in Canada. CEEs are also formulated in combination with progestins. Major brand names of CEEs in combination with medroxyprogesterone acetate include Prempro and Premphase in the United States, Premplus in Canada, Premique in the United Kingdom and Ireland, Premia in Australia and New Zealand, and Premelle in South Africa.

In 1982, finding that the farm had surplus fruit, Sharp visited local markets to get ideas of what products she and other farmers might be able to produce to increase their sales. Discovering that all the commercially produced jams, jellies and marmalades were manufactured from non-tropical fruits, she recognized an opportunity. Experimenting with recipes, Sharp developed a product with higher fruit content than the US Food and Drug Administration required and began marketing her natural products made without preservatives. Marie Sharp’s produces eleven types of preserves which are marketed locally and internationally.

Essity has, as of December 2018, had its Science-Based Target for its emissions reduction in line with climate science approved. Essity has qualified for inclusion in both the Dow Jones Sustainability World Index and the Dow Jones Sustainability Europe Index, and has also been named industry leader in the Household Products sector. Essity's is an active member within the Ellen MacArthur Foundation's plastics initiative “New Plastic Economy” and has committed to sustainability targets for packaging, for example that 85% of the company's packaging is to be manufactured from renewable or recycled material by 2025 .

Although in more recent years new houses have been built in the area, such as Queensway Park, Killeaton Place and the Rose Gardens. In June 2012, severe flooding following torrential rain, left 80 homes under 4 ft of water in Killeaton and residents having to be rescued by boat. Killeaton is also adjacent to Dunmurry Industrial Estate, the location of the DeLorean Motor Company factory, where the DeLorean was manufactured from 1981 until production ended in 1982. It was famously featured in the Back to the Future movie trilogy.

A double-T beam or double tee beam is a load-bearing structure that resemble two T-beams connected to each other. Double tees are manufactured from prestressed concrete using pretensioning beds of about to long. The strong bond of the flange (horizontal section) and the two webs (vertical members) creates a structure that is capable of withstanding high loads while having a long span. The typical sizes of double tees are up to for flange width, up to for web depth and up to or more for span length.

Horse coins were most often manufactured from copper or bronze, though there are a few documented cases of manufacture from animal horn or ivory. The horse coins produced during the Song dynasty are considered to be of the best quality and craftsmanship and tend to be made from better metal than those which followed. Horse coins often depicted famous horses from Chinese history, while commemorative horse coins would also feature riders. An example is the coin "General Yue Yi of the State of Yan" which commemorates a Yan attempt to conquer the city of Jimo.

Pineapple juice is manufactured from ripe pineapples.Pineapple juice processing complete sets of production lines TICO, Retrieved June 10, 2019 To clean pineapples before juicing, a brush and spray cleaning machine is used to remove stains, imperfections and pesticide residue.Pineapple juice processing line TICO, Retrieved June 10, 2019 After cleaning, the fruit is put into a pineapple peeling and extractor machine to obtain pulps which are put into a spiral juice extractor. A juice fine filter is then used to remove all solids, fiber and colloidal particles from the pineapple juice.

Diluted mouthwash or salt water solution can also be used after meals along with toothbrushing to help remove debris and flush the piercing and is recommended by practitioners. Initial jewelry is usually a labret stud or a captive bead ring, manufactured from high-grade surgical stainless steel, implant-grade titanium, or similar lightweight and inert metal. No matter which type of jewelry is used, the jewelry's diameter and length will be intentionally oversized to allow room for initial swelling. After healing, the jewelry can be replaced with a closer-fitting piece.

Mobile safety steps are generally manufactured from steel and have a painted finish. A new European Standard was published in August 2013 known as EN131-7 that covers mobile ladders with a platform commonly known in the UK as Mobile Safety Steps. The UK preparation of the new standard is entrusted to the B/512 technical committee that currently includes the HSE, Trading Standards and the Ladder Association who are a non-profit trade body representing the UK industry on the safe use of ladders and their standards development.

Actovegin is a deproteinated, pyrogen- and antigen-free hemodialysate of calf blood. It is manufactured from calf blood in several steps by ultrafiltration using various precipitation techniques and filters. The analysis of the final product shows that it contains a mixture of natural substances: both inorganic components such as common blood electrolytes (e.g. chloride, phosphate, sodium, potassium, calcium, and magnesium, several sources for nitrogen, amino acids, peptides, glucose, acetate and lactate) and organic components such as amino acids, a number oligopeptides, nucleosides, glycosphingolipids and products of the intermediary metabolism.

Restrictions on the use of metals in 1942, particularly aluminum, caused by an increased demand by shipbuilders and aircraft manufacturers led both the Army and the Navy to demand designs for components and training equipment that could be manufactured from wood composites. Investments in factories to build Weldwood products under license boomed immediately. One such licensee was the Hughes Aircraft Division of Hughes Tool Company, and another was U. S. Plywood.Mansfield (1999), pp. 185-186 The success of the product was well-publicized and earned him an honorary doctorate from Lawrence College.

The Bike Friday New World Tourist packs into an airline checkable suitcase that can be converted into a trailer and pulled behind the bicycle. The Raleigh Twenty, manufactured from 1968 to 1984, though still commonly available today second hand, is also a popular frame format used to construct collapsible touring bicycles. Other bicycles such as the Surly Travelers Check and the Santana Travel Tandem are full-sized bicycles which do not fold, but instead use Bicycle Torque Couplings to enable separating the frame into two parts for easier transport.

As a halogen, chlorine is a highly efficient disinfectant, and is added to public water supplies to kill disease- causing pathogens, such as bacteria, viruses, and protozoans, that commonly grow in water supply reservoirs, on the walls of water mains and in storage tanks. The microscopic agents of many diseases such as cholera, typhoid fever, and dysentery killed countless people annually before disinfection methods were employed routinely. By far most Chlorine is manufactured from table salt (NaCl) by electrolysis in the chlor-alkali process. The resulting gas at atmospheric pressures is liquified at high pressure.

In the late 1980s, a safety recall was issued for Inteli-Touch fans using Samsung motors. An electrical incompatibility between the motor and Inteli-Touch PC board resulted in several reported fires. Following this recall, Casablanca issued replacement Emerson K55 motors to customers who purchased Inteli-Touch fans with Samsung motors. On December 13, 1993, Casablanca voluntarily recalled 3,264,000 ceiling fans manufactured from January 1981 through September 1993 after receiving 50 reports of fans falling from their ceiling mountings due to a design flaw in the Hang-Tru canopy.

Glulam optimizes the structural values of wood, which is a renewable resource. Because of their composition, large glulam members can be manufactured from a variety of smaller trees harvested from second-growth forests and plantations. Glulam provides the strength and versatility of large wood members without relying on the oldgrowth-dependent, solid-sawn timbers. As with other engineered wood products, it reduces the overall amount of wood used when compared to solid-sawn timbers by diminishing the negative impact of knots and other small defects in each component board.

Heavy-traffic Accoya Glulam Bridge at Sneek, the Netherlands Glulam bridge crossing Montmorency River, Quebec Pressure-treated glulam timbers or timbers manufactured from naturally durable wood species are well suited for creating bridges and waterfront structures. Wood's ability to absorb impact forces created by traffic and its natural resistance to chemicals, such as those used for de-icing roadways, make it ideal for these installations. Glulam has been successfully used for pedestrian, forest, highway, and railway bridges. An example in North America of a glulam bridge is at Keystone Wye, South Dakota, constructed in 1967.

Most menstrual cups are now manufactured from medical grade silicone because of its durability and hypoallergenic properties, though there are also brands made of TPE (thermoplastic elastomer). Menstrual cups are becoming more popular worldwide, with many different brands, shapes, and sizes on the market. Most are reusable, though there is at least one brand of disposable menstrual cups currently manufactured. Some non-governmental organizations (NGOs) and companies have begun to propose menstrual cups to females in developing countries since about 2010, for example in Kenya and South Africa.

The Renault 5 is a four-passenger, three or five-door, front-engine, front wheel drive hatchback supermini manufactured and marketed by the French automaker Renault over two generations: 1972–1985 (also called R5) and 1984–1996 (also called Super 5 or Supercinq). The R5 was marketed in the US as Le Car, from 1976 to 1983. Renault marketed a four-door sedan variant, the Renault 7, manufactured from 1974 to 1984 in Spain by Renault's subsidiary FASA-RenaultData according to: Automobil Revue, catalogue edition 1979, p. 484-85. and exported in limited markets.

The restored Baoli Ghaus Ali Shah, a stepwell in Farrukhnagar. The town was once an important trading center for salt manufactured from saline water obtained from wells of 12 village estates located near the town. This salt was called Sultanpur Salt after the location of the most important salt-works of the region. Sultanpur was the centre of salt production for use in Delhi and the United Provinces until the late 19th century, exporting annually 680,000 maunds or 18,350 tons (1 maund = 37 kg approx.) over the Rajputana-Malwa Railway.

Nobadian warriors and their leadership made use of shields and body armour, most of it manufactured from leather. Fragments of thick hide have been found in the royal tombs of Qustul, suggesting that the principal interment was usually buried while wearing armour. A well-preserved and richly decorated breastplate made of oxhide comes from Qasr Ibrim, while a comparable, but more fragmentary piece was discovered at Gebel Adda, albeit this one was made of reptile hide, possibly from a crocodile. Another fragment which possibly once constituted a body armour comes from Qustul.

300px The Caergwrle bowl is a unique object dating to the Middle Bronze Age, originally manufactured from shale, tin and gold. It is thought to represent a boat, with its applied gold decoration signifying shields, oars and waves. The incomplete bowl was found in 1823 by a workman digging a drain in a field below Caergwrle Castle. It was donated to the National Museum Wales in 1912, and sent to the British Museum for restoration where it was originally reconstructed from wax with the decoration attached by an adhesive.

In both cases, the process of heat transfer occurs in an unsteady regime; therefore, its kinetics attracts the greatest interest in considering these steps. In the heating stage, the heat taken from the hot gas is absorbed both by the mold and the polymer material. The rig for rotational molding usually has a relatively small wall thickness and is manufactured from metals with a high thermal conductivity (aluminum, steel). As a rule, the mold transfers much more heat than plastic can absorb; therefore, the mold temperature must vary linearly.

General-purpose, high-carbon steel, drawn music wire (such as ASTM A228) is manufactured in both inch and metric music wire gauges (m.w.g.) in diameters as small as 0.15 mm up to 4.8 mm (0.006 to 0.192 inch). A small number of companies produce the tough, high tensile polished wire intended for limited music instrument markets, which is manufactured from steel of a specific composition by cold drawing. Unlike many other forms of wire, piano wire has no twist and is not formed from bundles of smaller-diameter wires.

In early 2009, A. Le Coq announced plans to start producing fermented kvass. The plans were controversial due to the drink's ethanol content (estimated at around 0.5-0.7 percent by volume); most bottled kvass sold in Estonia is manufactured from unfermented malt or malt extract and does not contain ethanol. The issue of safety of fermented kvass for children was particularly contentious.delfi.ee 24 March 2009 13:28: Ekspert: kääritatud kali on lastele ohutu In June 2009, A. Le Coq announced it would start selling the fermented kvass in an unbottled form.

In 1961, Volkswagen introduced the VW 1500 Karmann Ghia, or Type 34, based on its new Type 3 platform, featuring Volkswagen's new flat 1500cc engine design, and styling by Italian engineer Sergio Sartorelli at Carrozzeria Ghia. Until it was replaced by the VW-Porsche 914, it was the fastest, most expensive, and most luxurious passenger car VW manufactured in the 1960s --. 42,505 (plus 17 prototype convertibles) were manufactured from 1962-1969. Although the Type 34 was available in most countries, it was not offered officially in the U.S., VW's largest and most important export market.

Marine plywood is manufactured from durable face and core veneers, with few defects so it performs longer in both humid and wet conditions and resists delaminating and fungal attack. Its construction is such that it can be used in environments where it is exposed to moisture for long periods. Each wood veneer will be from tropical hardwoods, have negligible core gap, limiting the chance of trapping water in the plywood and hence providing a solid and stable glue bond. It uses an exterior Weather and Boil Proof (WBP) glue similar to most exterior plywoods.

The first batch of 3rd generation trains consisted of train 1-74~1-79. The cars were manufactured from 1994 to 1995 by Daewoo Heavy Industries under model "DEC-13". All new trains are ten cars long; six additional cars were built to lengthen second generation trains 1-59~1-61 from four to six cars for Ansan Line service. All of train 1-74 sans the driving cars (made excessive when 2nd generation train 1-62 was retired) and the additional cars for trains 1-59~1-61 were retired between 2015 and 2016.

In 1949, the Guide was amended based on the feedback from teachers, who had been using this as a resource in primary school. The five food groups were kept; the reference to butter, which had been incorporated into the section on Breads and Cereals in 1944, grew to include "or fortified margarine", an engineered spread which was by that date manufactured from vegetable oils due to wartime shortages of tallow and lard. Vitamin D supplements, available from sources such as cod liver oil, were recommended for the first time.

The Subaru Baja is an all-wheel-drive, four passenger, four-door utility manufactured from 2002 to 2006 by Subaru and marketed for model years 2003 to 2006. The Baja combines the handling and passenger carrying characteristics of a traditional passenger car with the open-bed versatility, and to a lesser degree, load capacity of a pickup truck. The unibody design borrowed heavily from the existing mechanicals, platform and sheet metal of the Subaru Legacy/Outback wagon. Production began on July 18, 2002 as a 2003 model at the Subaru of Indiana Automotive, Inc.

The words Macassar Oil were registered as a trademark by A. Rowland & Sons in 1888. Rowland's son (also named Alexander) later stated that a relative living in the island of Celebes in the Dutch East Indies had helped in procurement of the basic ingredient. Macassar oil is often made with coconut oil or palm oil or that of Schleichera oleosa, combined with ylang-ylang oil and other fragrant oils. Macassar oil was so named because it was reputed to have been manufactured from ingredients purchased in the port of Makassar in the Dutch East Indies.

The Simca Vedette is a large car, manufactured from 1954 to 1961 by the French automaker Simca, at their factory in Poissy, France. The Vedette competed in France's large car market at a time when the economy was finally returning to growth, and enjoyed moderate success with its American style finished off by the Italian designer Rapi. It was marketed with different model names according to trim and equipment levels. The Vedette was Simca's largest model at that time and it spawned a more economical version, the Simca Ariane.

The cost of the contract was US$632 million up to US$1.3 billion with options; as a consequence CRRC began development of a US$40 million assembly factory in Chicago, designed by Itasca, IL-based Cornerstone Architects Ltd. In March 2017, Quincy, Massachusetts based CRRC MA was awarded a contract by SEPTA to construct 45 bi-level rail cars with the option for 10 additional cars for delivery in October 2019. The SEPTA order will be built at the Springfield plant and car shell manufactured from the Tangshan plant.

The LG Chocolate (VX8550) (also known as the VX8550 or the LG Chocolate Spin) was the second of four versions of the LG Chocolate series mobile phone sold in North America. The device was manufactured from July 2007 to August 2008 for sale by Verizon Wireless in the United States and Telus in Canada. The device was sold in four colors: black, black cherry (red), blue mint (blue), and ice blue (light blue). The model was discontinued with the unveiling of the LG Chocolate 3 in August 2008.

The Opel Omega is an executive car engineered and manufactured by the German automaker Opel between 1986 and 2003. The first generation, the Omega A (1986–1993), superseded the Opel Rekord, was voted European Car of the Year for 1987, and was available as a saloon or estate. The second generation, the Omega B, was manufactured from 1993 to 2003. Rebadged variants of the Omega were marketed worldwide, including in North America as the Cadillac Catera, in Great Britain as the Vauxhall Omega and South America as the Chevrolet Omega.

Van breakfast Van herbed cheese () is a type of cheese made out of sheep's or cow's milk. Ripened cheese varieties containing herbs are traditional in Turkey and have been manufactured for more than 200 years in the east and southeast of the country. They are manufactured from raw milk, semi-hard in texture and salty in taste and have the aroma of garlic or thyme due to added herbs. Twenty-five types of herb, including Allium, Thymus, Silene and Ferula species which are most popular, are used individually or as appropriate mixtures.

Tatra was the manufacturer of luxurious automobiles in the Czech lands. Austro-Hungarian emperor Charles I used a NW type T; the Czechoslovak president Tomáš Garrigue Masaryk drove the twelve-cylinder Tatra 80 while his successor Edvard Beneš drove the streamlined Tatra 87. While the T87 was manufactured from 1936 to 1950, the post-war T600 may be considered the first car of the new political order. The T600 was much smaller and used an engine of only four cylinders, making it the descendant of the T97, the small pre-war Tatra.

Some companies have replaced natural exfoliating ingredients with microplastics, usually in the form of "microbeads" or "micro-exfoliates". These products are typically composed of polyethylene, a common component of plastics, but they can also be manufactured from polypropylene, polyethylene terephthalate (PET), and nylon. They are often found in face washes, hand soaps, and other personal care products; the beads are usually washed into the sewage system immediately after use. Their small size prevents them from fully being retained by preliminary treatment screens at wastewater plants, thereby allowing some to enter rivers and oceans.

The small and easy driven Corvette was a small underbone moped manufactured from 1960 until 1994 (from the early 1980s produced in Portugal). It had a Sachs engine, initially the same pedal engine as the earlier mopeds, later a foot-shifted 2.5 hp Sachs engine with three or four gears and fan cooling. A two-speed automatic version was designated Saxonette. The combination of German engines and Norwegian frames was cheap and reliable, with few errors. Tempo-Lett mopeds were especially popular during the 1960s and the 1970s.

Conradh na Gaeilge and other Irish-language bodies attempted a revival, circa 1965, of the Fáinne, which, for a short time at least, became successful: An Fáinne Nua ('The New Fáinne') was marketed with the slogan Is duitse an Fáinne Nua! - meaning "The New Fáinne is for you!." It came in three varieties: An Fáinne Nua Óir (The new Gold Fáinne), An Fáinne Nua Airgid (The new Silver Fáinne), An Fáinne Nua Daite (The new coloured Fáinne). The Gold Fáinne was manufactured from 9ct Gold, whilst the other two were sterling silver.

Similarly to the lyras found at Novgorod, the Cretan lyra, the Gadulka, the Calabrian Lira and the Greek lyras of Karpathos, Macedonia, Thrace and Mount Olympus are manufactured from a single wood block (monoblock), sculpted into a pear-shaped body. The slightly rounded body of the lyra is prolonged by a neck ending on the top in a block which is also pear-shaped or spherical. In that, are set the pegs facing and extending forward. The soundboard is also carved with a shallower arch and has two small semi-circular, D-shaped soundholes.

A simple rewire modification to the PGM- FI box increased power in the US engine up to the 118 hp. It was manufactured from 1994 until 1995 and sold in limited numbers (the United States receiving the model for its first year only), followed by the VTR1000R SP-1 RC51 in 2000. Unlike the VFR750R RC30 and VFR750F from which the engine was originally derived the gear drive for the cams was moved from the centre of the engine in between the cylinders to the one side allowing a slightly narrower engine.

Enzmann 506 The Enzmann 506 was a Swiss automobile manufactured from 1957 until the late 1960s (some sources claim 1969 as the final year). The company purchased new Volkswagens, unbolted the Beetle body shells from the floorpans, and refitted them with elegant fiberglass bodywork produced by a boatyard in Grandson. Some 100 cars were produced, and you could also buy separate fiberglass bodies to make the assembly yourself. The car's name--506--was nothing more than the stand number under which Enzmann debuted their creation at the 1957 Frankfurt Auto Show.

Clément-Stirling was a type of auto-mobile manufactured from 1898. It was fundamentally a French Clément-Panhard that was exported to Great Britain and sold by the Scottish coachbuilder 'Stirling' of Edinburgh as the 'Stirling dog cart'. Some were badged 'Stirling-Panhard' and others as 'Clément- Stirling'.Clément-Panhard, The Encyclopedia of Motoring Adolphe Clément was a director of Panhard-Levassor, and when the factory could not meet the production requirements for circa 500 units of the 1898 'voiture légère' ('dog cart') model, he undertook manufacture under licence at his factory in Levallois-Perret.

Despite a range of published information to the contrary, physical evidence suggests that the Conservatory of Flowers was constructed originally of redwood and milled on the West Coast. This hypothesis is supported by the historical data concerning California manufacturing capabilities during the 1870s. This data indicates that other buildings of equal complexity were being manufactured from redwood during this period. As part of the architectural investigation conducted by Architectural Resources Group in 1998, wood samples were taken from various locations throughout the building, and the majority found were coastal redwood (Sequoia sempervirens).

Manufactured from the hinge line of a giant clam (Tridacna gigas), the shell adze was found associated with a Neolithic burial assemblage in Duyong Cave, Quezon, Palawan. This shell tool is similar to the shell adzes recovered in Okinawa, Japan. Shells were used as tools in the Pacific as a replacement for hard stones which were not available on the islands. The presence of shell adzes not only in Palawan but also in Tawi-Tawi is very significant in the study of movements of people from the insular Southeast Asia to the Pacific.

The availability ended in 2011, due to a severe excise-duty hike which rendered it economically unviable. In Finland E85 is available from 52 St1 chain locations and 71 ABC chain locations. The E85 sold by St1 is labeled as RE85 and as "Eko E85" in ABC- stations to indicate it is manufactured from Finnish bio-waste. By way of international price comparison, in the Cook Islands as with many of the Pacific Islands, cost of producing 100% ethanol from coconut biomass is a fraction of obtaining fossil fuels.

The BMW E39 is the fourth generation of BMW 5 Series, which was manufactured from 1995 to 2004. It was launched in the sedan body style, with the station wagon body style (marketed as "Touring") introduced in 1996. The E39 was replaced by the E60 5 Series in 2003, however E39 Touring models remained in production until May 2004. The proportion of chassis components using aluminium significantly increased for the E39, and it was the first 5 Series to use aluminium for all major components in the front suspension or any in the rear.

Poly(hydridocarbyne) (PHC) is one of a class of carbon-based random network polymers primarily composed of tetrahedrally hybridized carbon atoms, each having one hydride substituent, exhibiting the generic formula [HC]n. PHC is made from bromoform, a liquid halocarbon that is commercially manufactured from methane. At room temperature, poly(hydridocarbyne) is a dark brown powder. It can be easily dissolved in a number of solvents (tetrahydrofuran, ether, toluene etc.), forming a colloidal suspension that is clear and non- viscous, which may then be deposited as a film or coating on various substrates.

TI's technology is based on the use of digital micromirror devices (DMDs). These devices are manufactured from silicon using similar technology to that of computer memory chips. The surface of these devices is covered by a very large number of microscopic mirrors, one for each pixel, so a 2K device has about 2.2 million mirrors and a 4K device about 8.8 million. Each mirror vibrates several thousand times a second between two positions: In one, light from the projector's lamp is reflected towards the screen, in the other away from it.

The omega end is the one furthest from the carboxyl group. Its trivial name is cervonic acid, its systematic name is all-cis-docosa-4,7,10,13,16,19-hexa-enoic acid, and its shorthand name is 22:6(n−3) in the nomenclature of fatty acids. Most of the DHA in fish and multi-cellular organisms with access to cold-water oceanic foods originates from photosynthetic and heterotrophic microalgae, and becomes increasingly concentrated in organisms the further they are up the food chain. DHA is also commercially manufactured from microalgae: Crypthecodinium cohnii and another of the genus Schizochytrium.

The original working drawings show a single structure as wide as the auditorium with a skillion roof and a glazed ventilated cupola, but changes occurred during the construction phase. The deep profile corrugated fibrous cement main roof is supported on single span steel trusses which have a segmentally curved bottom chord and have been manufactured from riveted angle iron sections. The bottom chord of the trusses are clad in fibrous plaster that sweeps down the walls and over iron supporting stanchions. The ceiling which follows the curve is lined with Craftex, a proprietary fibrous board.

The cases are manufactured from a high quality laminate shell and a four-point instrument suspension system is standard on all cases. Other important safety features include locking bow spinners, a hygrometer and a humidifier. Second to safety, aesthetic appeal and convenience are very important in the construction of Musafia cases. The vast majority of cases are equipped with the standard features such as a screw- attached teflon-treated cordura nylon cover (with an exterior music pocket), backpack provisions, a subway handle, a string tube and a large leather/leatherette handle.

The micro-channel plate is a thin glass wafer with a Nichrome electrode on either side across which a large potential difference of up to 1,000 volts is applied. The wafer is manufactured from many thousands of individual hollow glass fibers, aligned at a "bias" angle to the axis of the tube. The micro-channel plate fits between the photocathode and screen. Electrons that strike the side of the "micro-channel" as they pass through it elicit secondary electrons, which in turn elicit additional electrons as they too strike the walls, amplifying the signal.

The LeMat revolver was manufactured from 1856 to 1865, with approximately 2,900 being produced. The first models were manufactured by John Krider of Philadelphia, with the second model (the first overseas model) being produced by Charles Frederic Girard and Son of Paris. Quality concerns prompted LeMat to consider production at the Birmingham Small Arms Company in Birmingham, England, but production was never mounted there. LeMat revolvers from France were shipped to the Confederate States forces via the United Kingdom, and all firearms landed in the UK were (and still are) required to be proofed.

Waterskins were manufactured from kangaroo and wallaby hides. The biogeographical constraints of their terrain lacking surface water, determined much of their lifestyle. Neighbouring tribes such as the Warki, Jarildekald, and Portaulun had access to swamps, marshes, lake water, and stretches of river where they could hunt and trap animals, fish and ducks, and such resources enabled a more settled tribal existence. The Ngarkat, conversely, were an ever-shifting nomadic people, lacking even a fixed nomenclature for the mallee groves where they pitch camp and draw water from the mallee roots, day after day.

Lee-Enfield No.5 mk1 "Jungle Carbine" In 1943, trials began on a shortened and lightened No. 4 rifle, leading to the adoption in 1944 of the No. 5 Mk I Rifle, or "Jungle Carbine", as it is commonly known. The No. 5 rifle was manufactured from 1944 until 1947. The end of the Second World War saw the production of the Rifle, No. 6, an experimental Australian version of the No. 5, and later the Rifle, No. 7, Rifle, No. 8, and Rifle, No. 9, all of which were .22 rimfire trainers.

These cartons have a dimpled form in which each dimple accommodates an individual egg and isolates that egg from eggs in adjacent dimples. This structure helps protect eggs against stresses exerted during transportation and storage by absorbing a lot of shock and limiting the incidents of fracture to the fragile egg shells. An egg carton can be made of various materials, including foamed plastics such as polystyrene foam, clear plastic or may be manufactured from recycled paper and molded pulp by means of a mechanized papier-mâché process.

A truss connector plate is manufactured from ASTM A653/A653M, A591, A792/A792M, or A167 structural quality steel and is protected with zinc or zinc-aluminum alloy coatings or their stainless steel equivalent. Metal connector plates are manufactured with varying length, width and thickness (or gauge) and are designed to laterally transmit loads in wood. They are also known as stud ties, metal connector plates, mending plates, or nail plates. However, not all types of nail plates are approved for use in trusses and other structurally critical placements.

The SL-68 II is a Nelson valve based pump action paintball marker manufactured by Tippmann. the marker was manufactured from 1991 to 2003. The marker was still available to the public through many mail-order paintball stores, including the manufacturer, until the early 2000s, well after the advent of the Tippmann 98 Custom. The body is made of die cast aluminum alloy; other notable features include: a built in air source adapter (located at the bottom of the pistol grip) and a quick cleaning hole for squeegee access during a game.

With the entry of the United States into World War II, and the subsequent introduction of measures to conserve metal for the war effort, Illinois manufactured its license plates for 1943 from wood-based fiberboard instead of steel. This practice continued each year up to and including 1948, despite the war ending in 1945 with the surrender of Japan. The state reverted to manufacturing its plates from steel in 1949, although the 1950 and 1951 plates were instead manufactured from aluminum. License plates were placed under the jurisdiction of the Secretary of State in 1953.

Braghin 2002b, pp 6-7 This situation changes during the middle and late Warring States Period. Eye beads from this period are manufactured from Chinese lead-barium glass and are mainly found in the regions of the middle Yangzi River Valley, indicating a connection to the Chu kingdom.Braghin 2002b, pp 8-14 In this context, the beads became more common and available to a larger part of the Chinese society. Evidence of this is the presence of eye beads in medium and small burials, with modest funerary furnishings, as well as large, high-status burials.

The Nikon EL2 was manufactured from 1977 to 1978 and was essentially identical to the ELW, but with the addition of instant response silicon photodiode light meter sensors and support for Nikkor lenses with the new Automatic Indexing (AI) feature (see the Nikkormat FT3 above). The EL2 also abandoned the Nikkormat name (the Nikkormat FT3 being the last of the Nikkormat line) which had distinguished these cameras from the better known Nikon-badged models. The Nikon EL2 was replaced after a year of production by the Nikon FE.

O.P.—Denominación de Origen Protegida) by Spain and the European Union. Many of the cheeses are manufactured from single types of milk (cow, goat or sheep), but a few are mixtures of different milks, and the milk may be raw, pasteurised or creamy. The cheeses are made in a wide variety of styles including fresh, cured, semi-cured and pressed paste, and some are inoculated with mould to make blue varieties. There is a huge variation in the presentation of cheeses, from the hard, dark-skinned, two-kilo Manchego to the soft, small quesitos.

The word "paper" derives from papyrus, the name of the ancient material manufactured from beaten reeds in Egypt as far back as the third millennium B.C.H. Idris Bell and T.C. Skeat, 1935. "Papyrus and its uses" (British Museum pamphlet). Indeed, the earliest known example of "paper folding" is an ancient Egyptian map, drawn on papyrus and folded into rectangular forms like a modern road map. However, it does not appear that intricate paper folding as an art form became possible until the introduction of wood-pulp based papers.

Models manufactured from 1931 to 1945 had a recommended petrol-to-oil mix of either 8:1 or 10:1. From 1942 models specified a 10:1 mix which was specified up to 1979. After that date a 25:1 mix was specified, which was again changed for the introduction of the models 125 and 170, but these engines with the 50:1 mix soon failed, and British Seagull again specified 25:1. This relatively high percentage of oil was necessary due to the way the crankshaft bushings worked.

Plectron R-520 receiver manufactured in 1974. A Plectron is a specialized VHF/UHF single-channel, emergency alerting radio receiver, used to activate emergency response personnel, and disaster warning systems. Manufactured from the late 1950s, through the late 1990s, by the now defunct Plectron Corporation in Overton, Nebraska, hundreds of thousands of these radios were placed in homes of first responders across all of North America. This included ambulance crews, full-time and volunteer firefighters, off-duty specialized police response teams, Civil Defense members, and search and rescue teams.

Hemp seed oil is manufactured from varieties of Cannabis sativa that do not contain significant amounts of tetrahydrocannabinol (THC), the principal psychoactive element present in the cannabis plant. This manufacturing process typically includes cleaning the seed to 99.99% before pressing the oil. There is no THC within the hemp seed, although trace amounts of THC may be found in hemp seed oil when plant matter adheres to the seed surface during manufacturing. The modern production of hemp seed oil, particularly in Canada, has successfully lowered THC values since 1998.

After the lessons learned during World War I, many capital ships were refitted with double, triple, or even quadruple torpedo bulkheads, as well as anti-torpedo bulges to the exterior of the hull.Gillmer and Johnson, p.185 For example, the last US battleship designs during World War II had up to four torpedo bulkheads and a triple-bottom. The innermost bulkhead is commonly referred to as the holding bulkhead, and often this bulkhead would be manufactured from high tensile steel that could deform and absorb the pressure pulse from a torpedo hit without breaking.

Gilbert Grafton Newhall of Salem, Massachusetts, purchased the property in early 1855 to manufacture powder for Crimean War belligerents, and organized Oriental Powder Company to repair the damage and construct new facilities. A charcoal house, saltpeter refinery, wheel mills, press mills, kernelling mills, glazing mills, and storehouses were dispersed along both banks of the river and canal for a mile upstream of Gambo to minimize damage during infrequent explosions. Charcoal was manufactured from dried, debarked alder packed into cast iron retorts. Charcoal was made from willow, poplar or maple when alder was unavailable.

Shortly after, Remington took over a defaulted contract (by John Griffith of Cincinnati) for 5,000 U.S. Model 1841 Percussion Mississippi rifles. Based on the success of filling these orders, subsequent contracts followed in the 1850s. In 1856 the business was expanded to include the manufacture of agricultural implements. Upon Eliphalet's death in 1861, his son, Philo, took over the firm during the Civil War, and diversified the product line to include sewing machines (manufactured from 1870 to 1894) and typewriters (1873), both of which were exhibited at the Centennial Exposition in Philadelphia in 1876.

Alex Lifeson of Rush playing an ES-355 The ES-355TD (Thinline semi-hollow, Double pickups) was at the top of Gibson's range of thinline semi-hollowbody electric guitars. It was manufactured from 1958 to 1982, fitted with the Varitone Stereo option (SV), as the ES-355TD-SV released in 1959. This guitar is now available in reissues from Gibson's main line or custom shop. The headstock has a split-diamond inlay rather than the smaller crown inlay on the 335/345, in addition to a multiple-layered binding.

The most common agricultural tools in Dar al-Manasir are the Turiah (طورية), a hoe with an angular blade that proves very functional in opening and closing irrigation channels, and a small sawed sickle. Whereas the blade of the Turiah is bought from outside and often even imported from China, all wooden handles are locally produced. A different local impediment entirely manufactured from wood is the rake-like Arbil (اربيل) used for levelling the ground. Very popular among the Bedouin Manasir is the Qirbah (قربة), a hose made from the entire skin of a goat.

Technics SL-1200 is a series of direct-drive turntables originally manufactured from October 1972 until 2010, and resumed in 2016, by Matsushita Electric (now Panasonic Corporation) under the brand name of Technics. S means "Stereo", L means "Player". Originally released as a high fidelity consumer record player, it quickly became adopted among radio and disco club disc jockeys, thanks to the direct drive, high torque motor design, making it initially suitable for pushbutton cueing and starting of tracks on radio and in dance clubs. It is still extremely popular with audiophiles.

The D22 is a compact size pick up truck manufactured from 1997 to 2004. However, Nissan continued to build the D22 as a cheaper alternative to the D40 in many markets. Originally planned to follow the D21 Hard Body in being designed by Nissan Design International in La Jolla, CA, design of the D22 was reluctantly given to Japan during the 1994–1995 period. This was due to NDI being busy with many design projects of for concepts and models, such as the Quest (VX54 II), Altima (L30), and Maxima (A32.5).

The grade of material is also important, products manufactured from steel or hi-tensile/structural grade alloys are stronger than a standard alloy or polymer products. Bull bars are popular among the SUV and truck owners in the U.S. and installation of a bull bar is not considered a modification, as this is bolt-on accessory. The most popular materials of the US-built bull bars are polished stainless steel and mild steel with black powder coating. Some states require license plate relocation from the body to the bull bar.

Nissan Caravan (E20) Nissan Homy (E20) The E20 series Caravan and Urvan van and minibus were manufactured from February 1973 with seating configurations for three, five, seven, and up to 10 passengers. It was exclusive in Japan to Nissan Bluebird Store, while its twin the Nissan Homy was exclusive to Nissan Prince Store locations. It was especially popular in Europe, and was again very popular with fire departments and as ambulances in certain countries. It had a somewhat difficult handling, as it was heavy to steer, and was not available with power steering.

The pre-1964 Model 70s were manufactured from 1936 through 1963 after which time significant changes in the design and manufacture of the rifles were made. Pre-1964 Model 70s bring a substantial price premium due to a public perception that they were better, as they had several desirable features (Mauser-type controlled round feed, cut checkering) that the post-1964 version did not. The best way to identify a pre-1964 Model 70 Winchester rifles is the serial number and the fore-end screw to secure the barrel to the stock.Barsness, John.

The Triumph 13/35 or 12.8 was a car manufactured from 1924 to 1926 by the Triumph Motor Company in the UK. It was powered by a four-cylinder 1872 cc engine of 72 mm bore and 115 mm stroke with single Zenith carburettor which produced 36 bhp. It was the first British production car to be fitted with hydraulic brakes on all wheels. These were made by Lockheed and were of the external contracting type. Approximately 2500 of this model and the parallel 15/50 models were made.

The biplane was manufactured from December 1910, in the company Mégevet, Corsier (where the Dufaux brothers had completed their initial flight tests). The total number of manufactured aircraft should be at least 15 units (including Dufaux 4) but this needs to be clarified. The Swiss army had already rejected using the Dufaux 4 in May 1910, since they saw them as inappropriate for military use. The now much improved Dufaux 5 led Ernest Failloubaz (1892–1919), the youngest pilot in Switzerland (who was 19 years of age at that time), to fly it.

This military variant of Schwimmwagen was manufactured from 1939 to 1943. In 1940 Trippel revised the streamlining and enhanced the detailing of the civilian version of the SG 6 resulting in the SG 6 Colonial Pioneer, but only a few were made because of the war. Following the development of the swimming characteristics of Colonial Pioneer the military version of Schwimmwagen was also revised. The two doors were removed and the damage control improved. Production of this vehicle began in 1941 under the designation SG 6/41 at the Bugatti works in Molsheim in Alsace.

Bunting was originally a specific type of lightweight worsted wool fabric generically known as tammy,"The gradual change of spelling undergone by this name from 'estamet' to 'tammy' had by that date proceeded as far as 'tamett'. By 1633 it had become 'tammet'" . manufactured from the turn of the 17th century,"Worsted tammies, white and coloured, broad and narrow, were made in Norwich and East Norfolk, seemingly from about 1594, certainly from 1605" . and used for making ribbons and flags,"One special form of tammy, called bunt or bunting, was sold for making flags" .

A sewing needle A sewing needle, used for hand-sewing, is a long slender tool with a pointed tip at one end and a hole (or eye) at the other. The earliest needles were made of bone or wood; modern needles are manufactured from high carbon steel wire and are nickel- or 18K gold-plated for corrosion resistance. High quality embroidery needles are plated with two-thirds platinum and one- third titanium alloy. Traditionally, needles have been kept in needle books or needlecases which have become objects of adornment.

Despite its short commercial lifespan of less than two years in North America, the Dreamcast benefits from an active Homebrew scene even ten years after its discontinuation. Due to a flaw in the Dreamcast BIOS, which was intended for use with MIL-CD's, the console can run software from CD-R without the use of a modchip. Sega reacted by removing MIL-CD support from the BIOS of the later produced Dreamcast consoles manufactured from November 2000 onwards. The console is especially notable for its commercial Homebrew scene.

The shape of the Big Green Egg is designed to contain the heat by using two draft doors, one at the bottom and another at the top. The bottom draft door slides horizontally creating more or less air flow. This works in conjunction with the top draft door, that swivels left and right, creating more or less updraft, and in turn adjusting the temperature used in the cook. The Big Green Egg is manufactured from ceramics designed to reflect heat and this allows temperatures of up to to be reached.

Rate of grit consumption, amount of dust generated, and surface finish quality are some of the variables affected by the choice of grit material. Internationally the described media is manufactured in compliance with ISO 11126-3ISO 11126-3:1993 Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 3: Copper refinery slag: Preparation of Steel Substrates Before Application of Paints and Related Products. The blasting media manufactured from copper slag brings less harm to people and environment than sand. The product meets the most rigid health and ecological standards.

Isuzu i-370 The Isuzu i-series mid-size pickup truck line was manufactured from 2005 to 2008. Launched at the 2005 New York International Auto Show, for the 2006 model year, the i-series replaced the Isuzu Hombre, which had been out of production since 2000. Like the Hombre, which was based on the compact Chevrolet S-10 / GMC Sonoma, the i-series was based on the Chevrolet Colorado / GMC Canyon. Two models were offered at launch: the i-280, powered by the 2.8 L I4 engine, and the i-370, powered by the 3.7 L I5 engine.

A frame from the rotoscoped version In 2014, the Cinémathèque française received a donation from the collector François Binétruy: a short fragment of chromolithographed animated film, rotoscoped from an unidentified 1896 Méliès film and showing Méliès himself performing a conjuring trick. Such fragments of animation had been manufactured from 1897 onward in Germany and France, for home use in toy projectors. In 2015, the Cinémathèque uncovered another fragmentary home-projector version of the same film, this time reproducing the original black-and-white live-action frames. In July 2015, the film scholar Jacques Malthête identified the film as Georges Méliès's Conjuring.

Green LEDs manufactured from the InGaN/GaN system are far more efficient and brighter than green LEDs produced with non-nitride material systems, but practical devices still exhibit efficiency too low for high-brightness applications. With AlGaN and AlGaInN, even shorter wavelengths are achievable. Near-UV emitters at wavelengths around 360–395 nm are already cheap and often encountered, for example, as black light lamp replacements for inspection of anti-counterfeiting UV watermarks in documents and bank notes, and for UV curing. While substantially more expensive, shorter-wavelength diodes are commercially available for wavelengths down to 240 nm.

They are prized by collectors far above the US-made "parts kit" rifles. In the late 1990s Century Arms International (CAI) began offering semiautomatic only civilian versions known as the CETME Sporter, which are manufactured from assembled military surplus and US made parts. Although largely built from Model "C" parts, there have been reports of model "B" parts in the Model "C" Century built rifles. Due to the restrictions against importing receivers of select-fire weapons, all receivers for these civilian versions are made in the US. Earlier receivers were of cast aluminum, while later receivers were made from stamped and welded steel.

The Triumph 10/20 was a car manufactured from 1923 to 1926 by the Triumph Motor Company. It was the first Triumph automobile and was named the 10/20 for the Royal Automobile Club's taxation class of 10 horsepower rating and its actual output of 20 brake horsepower. The design was principally by Arthur Alderson assisted by Alan Lea and Arthur Sykes who were employed by Lea- Francis, to whom Triumph paid a royalty on every car made. It was powered by a 1,393 cc (1.4L) 4-cylinder side-valve engine designed by Harry Ricardo and fitted with a single updraught Zenith carburettor.

To demonstrate the significant role Alabama played during the war , the museum displays a large number of wartime ironworks, including cookware, rifles and other weapons used by US soldiers (e.g. a 52 Cal. U.S. Spencer Repeater), cast-iron water pipes, CS artillery projectiles, the original parts of the Six Mile Bloomery Forge manufactured in 1860s, as well as a part of the Steve Phillips Collection. Notably, the artillery shells manufactured from 1862 to 1865 at the Naval Gun Works are also preserved in this museum, and this exhibition is considered as the South's largest collection of artillery shells.

A gold and aluminum sputtered solar cell manufactured from a <100> p-type silicon wafer at the Cal Poly San Luis Obispo Microfab clean room. Photolithography is a process in removing select portions of thin films used in microfabrication. Microfabrication is the production of parts on the micro- and nano- scale, typically on the surface of silicon wafers, for the production of integrated circuits, microelectromechanical systems (MEMS), solar cells, and other devices. Photolithography makes this process possible through the combined use of hexamethyldisilazane (HMDS), photoresist (positive or negative), spin coating, photomask, an exposure system and other various chemicals.

Bornholm longcase clock Rønne also became famous for its longcase clocks or Bornholmerure which were manufactured from the middle of the 18th century until around 1900. Interest in clock-making started when a Dutch ship sailing from England ran aground off Rønne in 1744 carrying five grandfather clocks which were damaged in the accident. In view of the clocks' value, the sailors called on Poul Ottesen Arboe, a local turner, who was able to repair them. As a result of the experience he gained in the repair work, he was able to manufacture clocks himself, giving birth to a new local industry.

The open goods wagons of the Königsberg class, with a 20-ton maximum load were manufactured from 1927 in Austauschbau form. They could barely be distinguished from the A10 Verbandsbauart versions which had been built from 1923. As a result, the literature often wrongly cites the first year of manufacture of the Austauschbau form as 1923 or 1924. Its 9,100 mm long undercarriage over buffers (9,800 mm with hand brake) had a 4,500 mm axle base and was also used for the other wagon classes "G Kassel" (see above) and "V Altona" (see above) as well as numerous special and private goods wagons.

Many cars powered by indirect injection engines supplied by in-line injection pumps, or mechanical Bosch injection pumps are capable of running on pure SVO/PPO in all but winter temperatures. The most popular of these are the OM616 and OM617 engines found in the Mercedes-Benz W123 and W124 vehicles manufactured from 1980 through 1985. Indirect injection Mercedes-Benz vehicles with in-line injection pumps and cars featuring the PSA XUD engine tend to perform reasonably, especially as the latter is normally equipped with a coolant heated fuel filter. Engine reliability would depend on the condition of the engine.

The American Thermos Bottle Company Laurel Hill Plant is historically significant as the primary factory for the production of Thermos bottles that would allow the company to dominate in the world market. It is also historically significant as an example of the Norwich community coming together to attract the company and diversify the local industry. The plant was the primary factory where Thermos bottles were manufactured from raw materials between 1913 and 1984. The complex is architecturally significant as an example of late-19th century and early 20th century industrial mill design being adapted for new industry.

The Moog Taurus is a foot-operated analog synthesizer designed and manufactured by Moog Music, originally conceived as a part of the Constellation series of synthesizers. The initial Taurus I was manufactured from 1975 to 1981; a less successful redesign, Taurus II, followed from 1981 to 1983. Instead of a conventional keyboard, the Taurus uses an organ-style pedal board similar to the pedal keyboard of a spinet organ. This control method was chosen because the Taurus was intended to be played by foot while the player's hands played one or more keyboards, although it was often used by guitarists.

They started a company which would later be named Body Glove. French diving gear manufacturer Georges Beuchat wearing the "isothermic" sponge-rubber wetsuit he invented in 1953 Neoprene was not the only material used in early wetsuits, particularly in Europe and Australia. The Pêche-Sport "isothermic" suit invented by Georges Beuchat in 1953 and the UK-made Siebe Gorman Swimsuit were both made out of sponge rubber. The Heinke Dolphin Suit of the same period, also made in England, came in a green male and a white female version, both manufactured from natural rubber lined with stockinet.

For 1935, Presidents and Commanders offered an optional steel sliding roof similar to sunroofs common on vehicles today. In 1936, all Studebaker cars featured the "Planar" suspension system, and offered the "Startix" automatic engine-starting system as an optional accessory. Vehicles manufactured from 1936 also showed the influence of industrial designer Raymond Loewy, who was hired as Studebaker’s design consultant, and Helen Dryden who specialised in interior styling.Studebaker Dictator advertisement (Feb 1936) at The Old Car Manual Project website Studebaker made its Hill-Holder device (an anti-rollback brake system) standard on the President in that year.

The bullet pushes a bullet-diameter hole through the wipes, trapping propellant gas behind it entirely until the bullet has passed through the wipe completely Cross section drawing of an "integral" sound suppressor in part designed and built into the suppressed firearm. The silencer is typically a hollow metal tube manufactured from steel, aluminum, or titanium and contains expansion chambers. This device, typically cylindrical in shape, attaches to the muzzle of a pistol, submachine gun, or rifle. Some "can"-type silencers (so-called as they often resemble a beverage can) may be detached by the user and attached to a different firearm.

Caged IBC Tote Example Caged IBC totes are one of, if not the most commonly used of all current intermediate bulk container design types. Caged IBC totes are handling and shipping containers for the storing, transit, and operation integration of various commodities, with the most common being water. Caged IBCs are often utilized as one-use containers, especially when it comes to hazardous materials, but are also suitable for reuse under many conditions. This IBC type often features an interior liner, blow-mold manufactured from polyethylene, that is structurally supported by a protective cage frame, often of galvanized steel composition.

Creosote was the first wood preservative to gain industrial importance more than 150 years ago and it is still widely used today for protection of industrial timber components where long service life is essential. Creosote is a tar-based preservative that is commonly used for utility poles and railroad ties (UK: railway sleepers). Creosote is one of the oldest wood preservatives, and was originally derived from a wood distillate, but now, virtually all creosote is manufactured from the distillation of coal tar. Creosote is regulated as a pesticide, and is not usually sold to the general public.

Household coat rack with umbrella stand in the base A domestic umbrella stand is generally an upright container, often a cylindrical tube, stored near to the entrance of a house. In addition to acting as a functional piece of furniture, they can be aesthetic objects for decoration, and are manufactured from a wide variety of materials: clay, plastic, metal, and wood. Stands in public buildings are often designed to hold greater numbers of umbrellas, and may be constructed with separate spaces for each umbrella. Stands with locks are used in Japan, to protect umbrellas from thieves.

Drinking straws may be manufactured from a variety of materials (some better-suited for reusability), ranging from plastics such as Polypropylene (which were deemed to be more dense and durable than Polystyrene straws), Polylactic acid (PLA), and silicone (which has been promoted as a newer material option for reusable straws, citing invulnerability to cracking or peeling, insulation for hot and cold drinks, and one manufacturer promoting that theirs could be disposed of by burning them into biodegradable ash), to paper or cardboard, metal, bamboo wood and bagasse, and edible materials including rice, seaweed, rye, and confectionaries (such as candy).

Nyad was born in New York City on August 22, 1949, to stockbroker William L. Sneed Jr. and his wife Lucy Winslow Curtis (1925–2007).U.S. Social Security Death Index, accessed online on 16 February 2014 Her mother was a great-granddaughter of Charlotte N. Winslow, the inventor of Mrs Winslow's Soothing Syrup, a popular morphine-based medicine for children teething that was manufactured from 1849 until the 1930s. She is also a great-grandniece of women's-rights activist Laura Curtis Bullard. The Sneeds divorced in 1952, after which Lucy Sneed married Aristotle Z. Nyad, a Greek-Egyptian land developer, who adopted Diana.

Sikorsky and his colleagues began work on the machine in the spring of 1923 on a farm near Roosevelt Field on Long Island. The aircraft structure was manufactured from steel with the two bay wire braced strutted wings made from wood and fabric. The machine featured a twin vertical stabilizer design and was originally fitted with a pair of Hispano- Suiza 8 engines rated at 220 hp each. The pilot and mechanic sat in an open cockpit half way between the main wings and the tail, while up to 14 passengers were accommodated forward within the streamlined fuselage.

The 121 Class locomotives were manufactured from December 1960 to January 1961 and numbered B121 to B135 inclusive. From the early 1970s onwards several locomotives of this class dropped the "B" prefix from their fleet number when re-liveried. The last two locomotives that survived in traffic (124 and B134) were both withdrawn from service on 3 May 2008. Prior to 1961, almost all Irish diesel locomotives were built in Great Britain, but from the 1960s onwards, GM became the sole supplier of locomotives to CIÉ, which eventually also extended to Northern Ireland Railways locomotives at a later stage.

Archeon, a historical theme park A reading stone is an approximately hemispherical lens that can be placed on top of text to magnify the letters so that people with presbyopia can read it more easily. Reading stones were among the earliest common uses of lenses. The regular use of reading stones began around 1000 AD. Early reading stones were manufactured from rock crystal (quartz) or beryl as well as glass, which could be shaped and polished into stones used for viewing. The Swedish Visby lenses, dating from the 11th or 12th century, may have been reading stones.

The Core 2 processor line was introduced on July 27, 2006, comprising the Duo (dual-core) and Extreme (dual- or quad-core CPUs for enthusiasts), and in 2007, the Quad (quad-core) and Solo (single-core) sub-brands. Intel Core 2 processors with vPro technology (designed for businesses) include the dual- core and quad-core branches. Although Woodcrest processors are also based on the Core architecture, they are available under the Xeon brand. From December 2006, all Core 2 Duo processors were manufactured from 300 millimeter plates at Fab 12 factory in Arizona and at Fab 24-2 in County Kildare, Ireland.

Mars Crossing is a science-fiction novel by Geoffrey A. Landis about an expedition to Mars, published by Tor Books in 2000.Macmillan U.S., Mars Crossing, Tor Books 2000 (accessed March 14, 2013) The novel was a nominee for the Nebula award, and won the Locus Award for best first novel in 2001. The characters in the novel are members of the third expedition to Mars, following the failures of earlier Brazilian and American expeditions. The mission plan is based on the Mars Direct concept, where fuel is manufactured from the Martian atmosphere; the Brazilian Mars expedition selected a polar landing.

Figure 1: Tantalum powder CV/g. Tantalum capacitors are manufactured from a powder of relatively pure elemental tantalum metal.H.C. Starck GmbH, Product Information Tantalum capacitor powderH. Haas, H. C. Starck GmbH, Magnesium Vapour Reduced Tantalum Powders with Very High Capacitances J. Gill, AVX, BASIC TANTALUM CAPACITOR TECHNOLOGY, PDF or A common figure of merit for comparing volumetric efficiency of powders is expressed in capacitance (C, usually in μF) times volts (V) per gram (g). Since the mid-1980s, manufactured tantalum powders have exhibited around a ten-fold improvement in CV/g values (from approximately 20k to 200k).

Mack Magnum is a heavy-duty truck that was produced and manufactured from 1999 to 2003 by Mack Trucks Australia, a division of AB Volvo. It consisted of a Renault Magnum cab and chassis, with an all American Drive line including a Roadranger 18 speed transmission and had either Rockwell or Dana drive axles. Although a 454 hp Mack engine was an option. This truck was not "replaced" by the Mack/Renault Quantum in fact they were sold alongside each other one being a premium heavy duty truck the other the smaller lighter less expensive model.

Culture critic Alyssa Rosenberg criticized the book for being poorly sourced, stating: "by not distinguishing which quotations are manufactured from recollections, which are paraphrases recounted by sources, and which were spoken directly to him", and countered most of the major aspects of the book. For example, she disputed claims about Shepard's alleged drug dealing, as most of the sources remained suspect or otherwise unsubstantiated. "Jimenez never qualifies how credible the sources are, or validates their closeness to Shepard, or evaluates the potential motivations for their accounts", she wrote. Some police officials interviewed after Jimenez's book's publication disputed certain claims made in the book.

"Verbasci flos": dried flowers of Verbascum thapsus as used in herbal tea Although long used in herbal medicine, no high-quality clinical research has been conducted on Verbascum thapsus as of 2018, and there are no drugs manufactured from its components. Dioscorides first recommended the plant 2000 years ago, believing it useful as a folk medicine for pulmonary diseases. Leaves were smoked to attempt to treat lung ailments, a tradition that in America was rapidly transmitted to Native American peoples. The Zuni people, however, use the plant in poultices of powdered root applied to sores, rashes and skin infections.

Although the name could not be formally protected, from 1932 onwards George Absolom continued to trade as Teesmade Co. Goblin were in no position to object, as the name had the indisputable advantage of prior use. A similar electric teamaker was patented by William Hermann Brenner Thornton in association with Goblin in 1933, shortly after Absolom's patent. Goblin Teasmades (l-r) 1932 prototype, 1945, 1966 and 1972 production models Goblin's next model, also invented by William Hermann Brenner Thornton, was patented in 1934 and was manufactured from 1936. This was the first tea maker sold under the name Teasmade.

Herbie Hancock performing with a Roland AX-7 at the XM Sonic Stage at The Bonnaroo Music & Arts Festival The Roland AX-7, which was manufactured from 2001 to 2007, contains many more advanced features than early keytars. It has 45 velocity sensitive keys (without aftertouch), and a 3-character LED display. Several features aimed towards stage performance are present, such as a pitch bend ribbon, touchpad-like expression bar, sustain switch, and volume control knob, all on the upper neck of the instrument. There is also a proprietary "D-Beam" interface, made up of infrared sensors that detect nearby motion.

Presently the majority of measures employed to deal with black powder are reactive not proactive such as pigging and chemical cleaners resulting in significant down time and costs. Present proactive measures are to treat sour gas pipelines with corrosion inhibitors, employ lined pipe and when possible replacing the steel pipe with plastic pipe. For gas pipe lines, traditional filtration consisting of cartridge filter elements manufactured from paper, fiberglass, or polymer media with various rated filtration capabilities are employed to reduce black powder levels. These technologies are inefficient because they plug off quickly and require costly change outs resulting in reduced production.

Versatone is a brand of musical instrument amplifiers manufactured from a plant in Van Nuys, California during the 1960s and 1970s. Versatone amplifiers were owned, designed and produced by inventor G. Robert Hall and his wife Loretta S.Hall. Versatone Amplifiers are still owned by Loretta Hall and the rights were never sold off to anyone. Its singularity arises from the use of an almost high-fidelity amplification system that rendered good detail in live and recorded applications, its repute as a "secret weapon" among early and current session players, and its rarity in terms of volume of sales.

The Saint-Chamond tank was the second French tank to enter service during the First World War, with 400 manufactured from April 1917 to July 1918. Although not a tank by the present-day definition, it is generally accepted and described as such in accounts of early tank development. It takes its name from the commune of Saint-Chamond where its manufacturers Compagnie des forges et aciéries de la marine et d'Homécourt (FAMH) were based. Born of the commercial rivalry existing with the makers of the Schneider CA1 tank, the Saint-Chamond was an underpowered and fundamentally inadequate design.

The M56 was manufactured from 1953 to 1959 by the Cadillac Motor Car Division of General Motors for use by US airborne forces, though the vehicle was eventually used by the Spanish Navy Marines, Morocco and the Republic of Korea as well. With a crew of four (commander, gunner, loader and driver), the M56 weighed empty and combat- loaded. It had infrared driving lights but no Nuclear, Biological and Chemical (NBC) protection system and was not amphibious. The M56 was a fully tracked vehicle with rubber-tired run-flat road wheels and front drive sprocket wheels.

The whole high pressure part of the system is manufactured from steel tubing of small diameter, connected to valve control units by Lockheed type pipe unions with special seals made from Desmopan, a type of polyurethane thermoplastic compatible with the LHM fluid. The moving parts of the system, e.g., suspension strut or steering ram, are sealed by contact seals between the cylinder and piston for tightness under pressure. The other plastic/rubber parts are return tubes from valves such as the brake control or height corrector valves, also catching seeping fluid around the suspension push-rods.

Unrestored Harley-Davidson Hummer The Hummer was a motorcycle model manufactured by Harley-Davidson from 1955 to 1959. However, the name "Hummer" is now incorrectly used generically to refer to all American-made single- cylinder two-stroke Harley-Davidson motorcycles manufactured from 1948 to 1966. These motorcycles were based on the DKW RT125, the drawings for which were taken from Germany as war reparations after World War II. The RT125 drawings were also given to the United Kingdom and the Soviet Union as war reparations, resulting in the BSA Bantam and the MMZ M-1A Moskva, later known as the Minsk.

The Neoloy Geocell (previously under the Neoweb trademark) is a Cellular Confinement System (geocell) developed and manufactured by PRS Geo- Technologies Ltd. Composed of ultrasonically welded strips, Geocells are opened up on-site to form a 3D honeycomb-like matrix, which is then filled with granular soil material to create a soil stabilization / road reinforcement system. In addition to reinforcement of the subgrade, subbase or base layer of roads and railways, cellular confinement is also used for soil stabilization and erosion control in slopes, channels, retention walls, reservoirs and landfills. Neoloy Geocells are manufactured from Neoloy, a novel polymeric alloy (NPA).

Double cuff with cufflink Swivel bar type Double-panel type Pairs of silk knot links; they can conveniently be held together as a pair by the elastic when not in use This French cuff is fastened with silk knots. Cufflinks are items of jewelry that are used to secure the cuffs of dress shirts. Cufflinks can be manufactured from a variety of different materials, such as glass, stone, leather, metal, precious metal or combinations of these. Securing of the cufflinks is usually achieved via toggles or reverses based on the design of the front section, which can be folded into position.

Mercedes-Benz L-series 4x2 pulling containers in Bahrain Brazilian-built Mercedes-Benz L1318 (Uruguay) The Mercedes-Benz "Kurzhauber" (short-bonnet) truck is a conventional layout, cab-after-engine truck manufactured from 1959 to 1995. In Germany it is most commonly referred to as the Kurzhauber (for "short bonnet"). The engine intruded into the cabin underneath the windshield, all in the name of making a shorter truck to meet the strict period German regulations on overall length. The L-series was built in many countries and remains in service throughout many of the regions to which it was exported.

The buttstock, lower handguard and upper heatguard were first manufactured from laminated wood, this later changed to a synthetic, plum or dark brown colored fiberglass. The AK-74 gas tube has a spring washer attached to its rear end designed to retain the gas tube more securely. The lower handguard is fitted with a leaf spring that reduces play in the rifle's lateral axis by keeping the wood tensioned between the receiver and the handguard retainer. The receiver remains nearly identical to that of the AKM; it is a U-shaped thick sheet steel pressing supported extensively by pins and rivets.

The Bow-V-Car was an English cyclecar manufactured from 1922 to 1923 by the Plycar Company of Church Road, Upper Norwood, London. The car was designed by Charles Frederick Beauvais who was later better known as a stylist working for coachbuilders New Avon Body Company.David Burgess Wise, The New Illustrated Encyclopedia of Automobiles It had an integral chassis/body made largely of plywood, with a tubular frame at the rear for the engine and transmission. The engine was a rear-mounted, air-cooled (fan-assisted), 10 hp vee-twin engine made by Precision and equipped with a Degory carburetor.

The first are rollformed from thin aluminium sheets into a rectangular shaped door frame which incorporates a screen channel to hold the window screen material. Desire, New Orleans after Hurricane Katrina Rollformed aluminum sliding screen doors are the least expensive to produce because they can be manufactured from thin aluminum sheet formed into a relatively strong rectangular shape. Rollformed screen doors have mitered corners into which a steel or aluminum alloy corner is forced using a friction fit. If a steel corner is used, the rollformed sections are often pierced or staked into the corners, to help secure the corners together.

The frame of the FJ1200 is manufactured from mild steel box-section and uses a perimeter layout, the fairing and upper rear section use separate cylindrical tubing sub-frames. The rear shock absorber is placed vertically behind the engine and connects to a swinging arm made from extruded aluminium alloy (note: later 3XW models have mild steel swinging arm) via several forged aluminium rocker arms. The 17-inch front wheel is held between 41 mm spring and oil damped forks. The FJ1100 and early FJ1200 models featured adjustable anti-dive units and a smaller diameter 16-inch wheel.

After time, temperature, and various inorganic and organic additives (including the amount of air contact) determining the final degree of polymerization, the xanthate is acidified to regenerate the cellulose and release dithiocarbonic acid that later decomposes back to carbon disulfide and water.see Viscose Viscose manufactured from bamboo is promoted as having environmental advantages over viscose made with cellulose extracted from wood pulp. Bamboo crops may be grown on marginal land unsuitable for forestry; demand for bamboo has sometimes led to clearing forests to plant bamboo. But this is less common since Chinese forestry policy reforms in the 1990s.

Since these structures have different lattice sizes and symmetry, cooling austenite into martensite introduces internal strain energy in the martensitic phase. To reduce this energy, the martensitic phase forms many twins—this is called "self- accommodating twinning" and is the twinning version of geometrically necessary dislocations. Since the shape memory alloy will be manufactured from a higher temperature and is usually engineered so that the martensitic phase is dominant at operating temperature to take advantage of the shape memory effect, SMAs "start" highly twinned. When the martensite is loaded, these self-accommodating twins provide an easy path for deformation.

The BMW R1100GS is a dual-sport motorcycle that was launched in 1993, and manufactured from 1994 to 1999 by BMW Motorrad in Berlin, Germany.Schneider & Koenigsbeck, pp. 64 The bike has a flat-twin (boxer) engine, first seen in the R1100RS which was launched the year before in 1992, and was the first member of the GS family to use an air- and oil-cooled engine rather than the earlier air-cooled airhead engines which had been used on BMW motorcycles since the R32 in 1923. A smaller capacity sister model, the R850GS, was produced from 1996 to 2001.

The baseline Leopard 2, sometimes informally called the "A0" to differentiate it from later versions, was the first series manufactured version. The vehicles were manufactured from October 1979 until March 1982, altogether 380 vehicles. 209 were built by Krauss Maffei and 171 by MaK. The basic equipment consisted of electrical-hydraulic stabiliser WNA-H22, a fire control computer, a laser rangefinder, a wind sensor, a general-purpose telescope EMES 15, a panorama periscope PERI R17, the gunner's primary sight FERO Z18, on the turret roof as well as a computer-controlled tank testing set RPP 1–8.

Parker-style G2 large capacity ballpoint refill The Jotter is distinguished by a plunger and cap made of stainless steel, a stylized arrow-shaped clip, a plastic or metal barrel and a metal tip end. When introduced in 1954, the pen barrels were made from grooved nylon. Approximately a year later when new colors were introduced, the barrels were manufactured from 'Hercocel W' (Cellulose acetate) which was more adaptable to the needs of Parker's marketing department (It could be heat stamped, engraved or imprinted). Originally, the barrels were produced in black, grey, green and red (rust).

The cabin was in diameter with a mass of and could transport a payload. It was manufactured from a single, large plate that was cut up into form that could be reshaped and welded into a sphere. In order to make crew escape easier, the portholes were made wider than on the Explorer I. The atmosphere in the interior of the capsule was supplied from liquid air instead of liquid oxygen in order to reduce the fire hazard. The modified balloon was ready by the spring of 1935 and the first launch occurred July 10, 1935.

A wide variety of machinery and equipment was manufactured, which variously utilized water-power, steam, coal, gas manufactured from coal, and electricity as their sources of power or heat. At first, products were manufactured for railways, saw-milling and agriculture industries; ranging from steam engines, boilers, windmills to cast-iron cookstoves. Some of the engineering projects completed were steel railway bridges, the Port Chalmers dock, structural steel for the High Street Post Office and the King Edward Barracks. The Company designed and built equipment to extract gas from coal, and producer gas units were fabricated from castings made in the firm's foundry.

An isotopical pure diamond is a type of diamond that is composed entirely of one isotope of carbon. Isotopically pure diamonds have been manufactured from either the more common carbon isotope with mass number 12 (abbreviated as 12C) or the less common 13C isotope. Compared to natural diamonds that are composed of a mixture of 12C and 13C isotopes, isotopically pure diamonds possess improved characteristics such as increased thermal conductivity. Thermal conductivity of diamonds is at a minimum when 12C and 13C are in a ratio of 1:1 and reaches a maximum when the composition is 100% 12C or 100% 13C.

The most common synthetic food coloring today is Allura Red AC, a red azo dye that goes by several names including: Allura Red, Food Red 17, C.I. 16035, FD&C; Red 40, It was originally manufactured from coal tar, but now is mostly made from petroleum. In Europe, Allura Red AC is not recommended for consumption by children. It is banned in Denmark, Belgium, France and Switzerland, and was also banned in Sweden until the country joined the European Union in 1994. The European Union approves Allura Red AC as a food colorant, but EU countries' local laws banning food colorants are preserved.

A diving cylinder, scuba tank or diving tank is a gas cylinder used to store and transport the high pressure breathing gas required by a scuba set. It may also be used for surface-supplied diving or as decompression gas or an emergency gas supply for surface supplied diving or scuba. Cylinders provide gas to the diver through the demand valve of a diving regulator or the breathing loop of a diving rebreather. Diving cylinders are usually manufactured from aluminium or steel alloys, and are normally fitted with one of two common types of cylinder valve for filling and connection to the regulator.

Steel alloys used for dive cylinder manufacture are authorised by the manufacturing standard. For example, the US standard DOT 3AA requires the use of open-hearth, basic oxygen, or electric steel of uniform quality. Approved alloys include 4130X, NE-8630, 9115, 9125, Carbon-boron and Intermediate manganese, with specified constituents, including manganese and carbon, and molybdenum, chromium, boron, nickel or zirconium. Steel cylinders may be manufactured from steel plate discs, which are cold drawn to a cylindrical cup form, in two or three stages, and generally have a domed base if intended for the scuba market, so they cannot stand up by themselves.

Upper Drilling Derrick built 1865 Prehistoric settlements in the vicinity of the salt springs is proven: "From the Sülbecker mountain originate some tools that have been manufactured from Neanderthals resting there".Einbecker Geschichtsverein (ed.): Einbecks Dörfer - Bilder aus vergangenen Zeiten, Duderstadt 1995, p. 132 f. During the development of a new housing area "Am Bohrturm" (At the Derrick) in the 1980s further archaeological investigations were carried out which showed that the settlements date back to about 5000 BC. The first written source is to be found in a deed of the monastery Amelungsborn from the year 1210.

Humber Fifteen 15 horsepower cars were medium to large cars, classified as medium weight, with a less powerful than usual engine which attracted less annual taxation and provided more stately progress. The coachwork was superbly finished, specially the tourers, and these cars were much favoured by the professional classes. They were manufactured from 1919 to 1924 and 1924 to 1927. Their former place in Humber's catalogue was bracketed in 1927 and 1928 by new cars, a much smaller engined 14/40 or late in the same year a 20-horsepower six-cylinder 20/55 of ten per cent greater capacity.

Iranian designers seek Islamic chic, Sydney Morning Herald, 16 July 2007, retrieved 26 February 2011 Aside from cultural modesty, Chinese women have sometimes sought to hide their second pregnancy in less shapely clothes because Chinese policy has dictated that they can only have one child. In Chinese and Japanese cultures, there is a fear of radiation from devices such as computers and mobile phones, especially during pregnancy. Even though there is no evidence to support this (according to WHOWhat are electromagnetic fields?, World Health Organization, retrieved 26 February 2011), Asian maternity wear is often manufactured from “anti-radiation” fabrics.

In more recent times, a "package pumping station" provides an efficient and economic way of installing a drainage system. They are suitable for mechanical building services collection and pumping of liquids like surface water, wastewater or sewage from areas where drainage by gravity is not possible. A package pumping station is an integrated system, built in a housing manufactured from strong, impact-resistant materials such as precast concrete, polyethylene, or glass-reinforced plastic. The unit is supplied with internal pipework fitted, pre-assembled ready for installation into the ground, after which the submersible pumps and control equipment are fitted.

Micro-Vett Electric Porter The company from Imola continues the production of Rascal, but, given the lack of involvement of the vehicle manufacturer, approached Piaggio with which, starting from 1994, launches a collaboration for the electrification of Porter. This vehicle, thanks to purchasing incentives, meets a great success in the Italian market and it was manufactured from 1994 to 2003 in about 5,000 units. The lead-acid batteries provide a range of 60 km and a top speed of 65 km/h. Piaggio delivers the vehicles without endothermic engine to Micro-Vett and here they're converted into electric.

1979 Spirit DL liftback The AMC Spirit was largely a restyled Gremlin, which had been manufactured from 1970 to 1978. Engineering and equipment upgrades introduced on the 1978 Concord carried over to the subcompact Spirit. The suspension system was revised with "soft-ride" mountings for the coil springs over A-arms in the front and the rear live-axle with leaf springs to improve ride and handling. Features included enhanced sound-deadening and corrosion protection as well as lightweight aluminum bumpers, lock-up automatic transmission converter, and higher-compression six-cylinder camshaft and pistons for economy, performance, and emissions.

The Analogue Nt mini is an FPGA-based aftermarket Nintendo Entertainment System and Famicom designed and manufactured by Seattle based company Analogue, Inc. Distinct from the original Analogue Nt, the Nt mini is designed around an FPGA. With a 1080p HDMI, analog video (RGB, Component, S-Video, & Composite), analog audio (48kHz 16-bit), original NES-style controller ports, a Famicom expansion port, a Famicom microphone input, the Nt mini works with all NES, Famicom, Famicom Disk System cartridges and accessories from Nintendo's 8Bit era. Like the original Analogue Nt, the Nt mini's enclosure is a solid aluminum unibody enclosure manufactured from 6061 aluminum.

Diagram of double tee beam A double tee or double-T beam is a load-bearing structure that resembles two T-beams connected to each other side by side. The strong bond of the flange (horizontal section) and the two webs (vertical members, also known as stems) creates a structure that is capable of withstanding high loads while having a long span. The typical sizes of double tees are up to for flange width, up to for web depth, and up to or more for span length. Double tees are pre-manufactured from prestressed concrete which allows construction time to be shortened.

Attitude Indicator, or perhaps more commonly known as the artificial horizon. The localizer is shown on the scale below the attitude gauge, and is in this case looking almost as a small white "^" sign. Both the indicator and its scale are small The localizer indicator is (on most aircraft manufactured from the late 1950s) shown below the Attitude Indicator, but is still a part of this instrument together with the glideslope indicator and the cross in the center of the instrument which is called Flight Director. The glideslope scale is located to the right of the attitude sphere.

Old tumbler switch made up of Bakelite Earlier switches were made of porcelain in the surface-mounted version and operated as a rotary switch with a rotary mechanism. Later, more durable Bakelite and Ebonite was used. Today they are made of modern plastics, like Polycarbonate or fire resistant ABS. Some switches may also be manufactured from other plastics like polyamide, polypropylene or pvc but mainly limited to wire mounted switches (like night lamp switches) mainly due to reduced weight, and most such switches are not used in high power devices (mainly table lamps, table fans, some radios) mainly up to 2 amperes.

Cut wire shot is a metal shot used for shot peening, where small particles are fired at a workpiece by a compressed air jet. It is a low-cost manufacturing process, as the basic feedstock is inexpensive. As-cut particles are an effective abrasive due to the sharp edges created in the cutting process; however, as-cut shot is not a desirable shot peening medium, as its sharp edges are not suitable to the process. Cut shot is manufactured from high quality wire in which each particle is cut to a length about equal to its diameter.

The construction of the armored medical evacuation vehicle is assembled with armored steel plates – in double layer construction and provides all-around protection according to EN1063 B7+ Standard for the crew located in front, rear medical compartment and engine compartment. The base of the vehicle is manufactured from the layer of armored steel – while the protection level is further enhanced by an add-on armor panels – which can be easily removed or replaced – for replacement of damaged panes, upgrade/downgrade of vehicle protection level, etc. Armor plates provide protection from 7.62 mm armor-piercing bullets shot from near distance and artillery shell fragments.

Subaru Baja Subaru Baja Subaru developed a four-door coupé utility (pickup) version of the Outback with all-wheel-drive, known as the "Subaru Baja" (pronounced ba-ha). Manufactured from 2002 to 2006 and marketed for the 2003 through to 2006 model years, the Baja combined the handling and passenger carrying characteristics of a traditional passenger car with the open-bed versatility, and to a lesser degree, load capacity of a pickup truck. Subaru marketed the Baja in the United States, Canada, and Chile. The unibody design borrowed heavily from the existing mechanicals, platform and sheet metal of the Outback wagon.

In the UK, using anaerobic digestion is growing as a means of producing renewable biogas, with nearly 90 biomethane injection sites built across the country. Ecotricity announced plans to supply green gas to UK consumers via the national grid.The Guardian 'Food waste to provide green gas for carbon-conscious consumers' Centrica also announced that it would begin injecting gas, manufactured from sewage, into the gas grid.The Guardian 'Human waste turned into renewable gas to power homes' In Canada, FortisBC, a gas provider in British Columbia, injects renewably created natural gas into its existing gas distribution system.

The Staunau was a German automobile manufactured from 1950 until 1951. Karl- Heinz Staunau was an entrepreneur from Hamburg-Harburg who had enjoyed some success as a manufacturer of commercial machines for ice cream and bakery businesses during the years following the war. By the late 1940s he had set his sights on a larger share of the Wirtschaftswunder (West German economic miracle) that was to become a feature of post-war reconstruction. With the help of a former aircraft engineer Staunau developed in a few months a small two door four seater fastback bodied car to a point where he said it was ready for production.

Vu Van Dung & Le Huy Guang, writing in 1996, argue that this rattan has been cultivated by smallholders around Hanoi for over 100 years, this is argued to be one of the oldest rattan cultivation systems known. The availability of wild plants of this small diameter rattan was decreasing in the Cẩm Xuyên District, Hà Tĩnh Province, Vietnam. Since 1998, there has been local household garden growing, however while manufacturing of furniture and handicrafts has continued, and the Hanoi market has been tapped into, expansion into international markets has not occurred. Household items manufactured from the split cane in the area include rope, baskets, pillows and seat surfaces.

The vehicles were manufactured from aluminium, approx with articulated bogies between them. The APT-E made its first run on 25 July 1972 from Derby to Duffield and was immediately 'blacked' by the drivers' union ASLEF, due to concerns that the single driver's seat preempted ongoing negotiations about the single-manning of trains. It was over twelve months before it ran again on the main line in August 1973. The prototype was eventually tried out on the Great Western Main Line, and achieved a new British railway speed record when on 10 August 1975 it hit whilst on test with the Western Region between Swindon and Reading.

Natural can be a relative term. On urban sites where research interests may make a detailed examination of the earliest part of the record impractical, prehistoric or rudimentary human activity may go unrecorded, as opposed to an equivalent horizon on a rural site for which the study team's agenda is to look for prehistoric evidence. Chemical and soil process over time often obscure and cause decomposition of cultural materials, and thus a human-occupied layer may look natural. Additionally, early prehistoric tools were manufactured from natural materials, such as bone, stone and fiber; they do not stand out as clearly as metal, glass and plastic.

Pottery Pottery was manufactured from native clays tempered with sand, crushed stone and organic material. The EBK pot was made by coil technique, being fired on the open bed of hot coals. It was not like the neighbouring Neolithic Linearbandkeramik and appears related instead to a pottery type that first appears in Europe in the Samara region of Russia c. 7000 cal BC, and spread up the Volga to the Eastern Baltic and then westward along the shore.Fredrik Hallgren, The Introduction of Ceramic Technology Around the Baltic Sea in the 6th millennium, in Helena Knutsson, (ed.), Coast to Coast – Arrival, Coast to Coast book 10 (2004), pp.

To cope with the ever-decreasing demand for pocket watches during World War I, Hammarlund developed new ideas for the manufacturing of typewriters and taxi meters. After financial problems however, the pocket watch production was put down in 1917 (about 8,000 pocket watches was manufactured from 1888 to 1917) and in 1920 the company was liquidated. Instead, a new company, AB Halda Fabriker, took over the manufacturing of typewriters. The successful production of taximeters, took the Fabriks AB Halda taximeter (which is the origin of today's Haldex AB (gearboxes, four-wheel drive, etc.) and Halda Trancometer AB (taximeters)) and production was moved to Halmstad.

The Opel Combo is a panel van and leisure activity vehicle from the German automaker Opel. The Combo first appeared in 1993, a second generation model was introduced in 2001, and the third was manufactured from December 2011 to December 2017, based on the Fiat Doblò. The name "Combo" was previously applied as a suffix to a three-door panel van body style of Opel Kadett E from 1986 until 1993. Opel/Vauxhall joined Groupe PSA in March 2017: the fourth generation Combo, launched in March 2018, shares the platform and bodywork of the Peugeot Rifter and Partner, as well as the Citroën Berlingo.

While educated as a civil engineer, he became interested in the coal and iron industry. While directing a smelting establishment in Lycoming County, Pennsylvania, Walters produced the first iron manufactured from mineral coal in the United States. In 1841, he moved to Baltimore, where he worked as a grain merchant and, in 1847, became a liquor wholesaler by establishing the importing firm of William T. Walters & Co. He spent much of the American Civil War in Europe, where he studied and purchased art. After the end of the war, he returned to the United States, where he invested in banking and railroads, founding the Atlantic Coast Line.

The word paper is etymologically derived from Latin , which comes from the Greek (), the word for the plant.πάπυρος , Henry George Liddell, Robert Scott, A Greek–English Lexicon, on Perseus Papyrus is a thick, paper-like material produced from the pith of the ' plant, which was used in ancient Egypt and other Mediterranean cultures for writing before the introduction of paper. Although the word paper is etymologically derived from papyrus, the two are produced very differently and the development of the first is distinct from the development of the second. Papyrus is a lamination of natural plant fibre, while paper is manufactured from fibres whose properties have been changed by maceration.

KLM Douglas DC-8-63 at London Heathrow Airport in 1982. The DC-8 was the mainstay of the KLM narrowbody jet fleet. In 1980, KLM carried 9,715,069 passengers. In 1983, it reached an agreement with Boeing to convert ten of its Boeing 747–200 aircraft (Three 747-200Bs and Seven 747-200Ms) into Boeing 747-300s with the stretched- upper-deck modification. The work started in 1984 at the Boeing factory in Everett, Washington, and finished in 1986. The converted aircraft were called Boeing 747-200SUD or 747-300, which the airline operated in addition to three newly built Boeing 747-300s manufactured from the ground up.

Using American Power's financing, Portland Gas supported the creation of St. Johns Gas Company in 1909, Clackamas County Gas Company in 1913, and acquired both companies in 1915. In the early days of the company, gas was manufactured from coal or oil in local plants. This process ended with the arrival of natural gas to the region in the 1950s, and the company closed its last gas plant in 1957. In 1958, the company changed its name to Northwest Natural Gas Company. During the 1960s, 70s, and 80s, the company continued to grow and expand its service area beyond Portland and the Willamette Valley.

Airmen work on the W62 warheads of an LGM-30G Minuteman III’s Multiple Independently-targetable Re-entry Vehicle (MIRV) system. The W62 is an American thermonuclear warhead designed in the late 1960s and manufactured from 1970 to 1976, used on some Minuteman III ICBMs and retired in 2010. The exact dimensions of the W62 are classified, but it fits within the Mark-12 reentry vehicle which is 22 inches in diameter and 72 inches long. The weight of a fully loaded Mark-12 is 800 pounds; the weight of the W62 is stated as 253 lb. The yield of the W62 is 170 kilotons TNT,Allbombs.

Potentials within the heatsink represent internal temperatures and current flows represent heat flow. In many cases the internal heat source may be modelled with a constant current source, rather than a voltage, giving a better analogy of power loss as heat, rather than assuming a simple constant temperature. If the external airflow is restricted, the 'ambient' electrode may be subdivided and each section connected to a common voltage supply through a resistor or current limiter, representing the proportionate or maximum heatflow capacity of that airstream. As heatsinks are commonly manufactured from extruded aluminium sections, the two-dimensional paper is not usually a serious limitation.

The synthetic fiber produced through this process was chemically similar in its potential applications to the carbon filament Swan had developed for his incandescent light bulb, but Swan soon realized the potential of the fiber to revolutionise textile manufacturing. In 1885, he unveiled fabrics he had manufactured from his synthetic material at the International Inventions Exhibition in London. The next step was taken by Hilaire de Chardonnet, a French engineer and industrialist, who invented the first artificial silk, which he called "Chardonnet silk". In the late 1870s, Chardonnet was working with Louis Pasteur on a remedy to the epidemic that was destroying French silkworms.

1st generation S-train, August 1969 The first generation (DSB class MM-FM-MM) was introduced in 1934 at the opening of the network, and consisted of three carriages per train set (2 motor cars and 1 trailer car), manufactured from 1934 to 1962. Frichs A/S supplied the electric components while Scandia (now Bombardier Transportation Denmark) supplied the car bodies and non-electric components. They were retired in 1978, and one was used as a heritage train until 2003, when DSB decided to discontinue its use. They are the longest serving S-train rolling stock to date, in continuous service for 44 years.

The AMB series engine was an inline 4-cylinder engine, manufactured from 2001 to 2003 by the Volkswagen Group in Ingolstadt, Germany as a replacement for the earlier 1.8T engines, such as the AEB-type engine. As opposed to the AEB, the AMB had thinner wrist pins (19 mm instead of 20 mm). The AMB engine was used in a variety of Volkswagens and Audis, as well as being used by companies owned by Volkswagen, such as the Spanish car manufacturer, SEAT. The engine was available in a wide variety of configurations and was mounted longitudinally in most Audi applications, and horizontally in most other applications.

Sintered electrode In this image of a sintered electrode it can be seen that three different grain sizes were used. The different layers were: # top layer of fine-grained material # layer from different groups # gas distribution layer of coarse-grained material Most of the electrodes that were manufactured from 1950 to 1970 with the sintered method were for use in fuel cells. This type of production was dropped for economic reasons because the electrodes were thick and heavy, with a common thickness of 2 mm, while the individual layers had to be very thin and without defects. The sales price was too high and the electrodes could not be produced continuously.

The Wasp 58 is composed of a sealed launch tube manufactured from fibreglass reinforced plastic. The Wasp 58's HEAT antiarmour warhead is 58-mm in diameter and is based on the Grenade à fusil antichar de 58 mm Mle F1 PAB rifle grenade's warhead, also designed and manufactured by Luchaire and in service with the French military and other armies worldwide. The antiarmour warhead of the Wasp 58 can penetrate 300 mm of rolled homogeneous armour (RHA). And while insufficient in penetration for frontal engagements of today's modern main battle tanks, it can engage other armoured targets (wheeled armour vehicles or light tanks) from both frontal and side.

The SC50 bomb has eight variants and multiple ways they were manufactured from one-piece drawn steel bodies to separate steel pieces welded together and their total weight was to . It was filled through the base with either Amatol, TNT or Trialen 105, a mixture of 15% RDX, 70% TNT and 15% aluminum powder. The SC 50 could be fitted with either an anti-ricochet adapter for anti-ship use or a Stabo Spike that kept the bomb upright and exploded the bomb before it buried itself for anti-personnel use. It could be vertically or horizontally suspended in a bomb bay or horizontally mounted on a wing or fuselage hardpoint.

Mozzarella – a type of pasta filata Pasta filata (Italian: "spun paste") is a technique in the manufacture of a family of Italian cheeses also known in English as stretched-curd, pulled-curd, and plastic-curd cheeses. Stretched curd cheeses manufactured from the pasta filata technique undergo a plasticising and kneading treatment of the fresh curd in hot water, which gives the cheese its fibrous structure. citing The cheese-making begins in the normal way. The milk (usually from cows or water buffalo) is warmed and curdled and allowed to rest for an hour before the curds are cut into small pieces and the whey is drained off.

1993–1998 Jeep Grand Cherokee (US) 1993 Jeep Grand Cherokee Laredo (USA) The original Grand Cherokee was launched in 1992 as a 1993 model year vehicle in the luxury SUV segment. The "ZJ" models, manufactured from 1992 to 1998, originally came in three trim levels: base (also known as SE), Laredo, and Limited, subsequent trims were added, included Orvis (MY 95–98), TSI (MY97–98). The base model included features such as full instrumentation, cloth interior, and a standard five-speed manual transmission, while gaining the moniker "SE" name for the 1994 model year. Power windows and locks were not standard equipment on the base trim.

The span of the horizontal stabiliser was increased; the vertical stabiliser was made both taller and longer, to provide the required steering power while keeping the top of the vertical fin at a height comfortable for the assembly of the horizontal empennage. The cockpit, manufactured from carbon and aramid reinforced plastic, was designed to accommodate pilots up to two meters tall. Available space is sumptuous for both pilots, exceeding that of all comparable production gliders. The front seat is similar to the LS4 cockpit, and both seats have enough leg and elbow room to preclude the mutual interference too often encountered in tandem sailplanes.

The Chols traded cacao and annatto into the encomienda towns of Verapaz in exchange for metal tools (particularly axes and machetes) and salt. Other products traded to the Manche by the Qʼeqchiʼ of colonial Verapaz included cotton textiles and quetzal feathers. The Qʼeqchiʼ used this trade to supply products demanded by their Spanish overlords under the repartimiento system. The Manche produced a number of products for trade, manufactured from resources in the southern Maya Mountains of Belize; these included blowguns, bows and arrows, finely sculpted greenstone axes, hammocks, manos and metates, pottery, and cane, all of which were traded across the southern Maya region.

After a heated discussion about how Grace and Tom had a toxic relationship because of her intolerance, and even after his death, Grace tells Ruth about her visions. Grace says that, although it's probably manufactured from her "God Helmet," she finds comfort in her visions of Tom after his death. In the end of the conversation, Grace and Ruth each come to the conclusion that it is not even love, but kindness, that is most important to the well-being of the world and society. Ruth and Grace reconcile their differences and in the end scene they reminisce about Tom and Grace volunteers to tend to Ruth's crying baby.

Museo della Scienza e della Tecnologia Leonardo da Vinci, Milan Demonstration CD players from Sony had the disc placed vertically in the machine allowing the CD face to be visible through a transparent front whilst playing. The CDP-101 instead opted for a horizontal tray-loading system. The case and front panel of the system were manufactured from plastics. The front of the unit featured a vacuum fluorescent display panel to provide information such as track number and playing time, an infrared receiver for the included remote control, and buttons to control playback, open and close the tray and toggle the display between showing elapsed and remaining playing time.

The Project later purchased a second tender from the East Lancs Railway, Bury. The frame plates were in good enough condition to be used along with two of its axle boxes, (the remaining two acquired with the engine's tender not being usable and the two missing axle boxes are now in use with another engine). Alongside the acquisition of the second tender which provided the society with two more usable axle boxes they also now had two spare tender wheel sets for use in the future when required. The remaining two axle boxes need to be either acquired from another donor tender or manufactured from new.

Manufactured from 1920 until the beginning of World War II, these models incorporate all of the improvements of the previous machines. The Comptometer logo is inscribed on their front and back panels and they have the red release key that was introduced with the previous two models. The ST (SuperTotalizer) has two display output registers and two additional levers that allow for the creation of intermediate results. Each key pressed by the operator is added to the top display register creating an intermediate result which is added to the bottom display register when the operator activates the front right lever (it also resets it).

Powdered fishmeal Fish meal is a commercial product mostly made from fish that are not used for human consumption; fishmeal is generally used to feed farm animals in agricultural setting. Because it is calorically dense and cheap to produce, fishmeal has played a critical role in the growth of factory farms and the number of farm animals it is possible to breed and feed. Fishmeal is made from the bones and offal left over from fish caught by commercial fisheries. The vast majority of the fish from which fishmeal is manufactured are not used for human consumption; rather, fishmeal is generally manufactured from by-catch.

The Triumph TR7 is a sports car which was manufactured from September 1974 to October 1981 by the Specialist Division (latterly the Jaguar-Rover-Triumph division) of British Leyland in the United Kingdom. It was initially produced at the Speke, Liverpool factory, moving to Canley, Coventry in 1978 and then finally to the Rover Solihull plant in 1980. The car was launched in the United States in January 1975, with its UK home market debut in May 1976. The UK launch was delayed at least twice because of high demand for the vehicle in the US, with final sales of new TR7s continuing into 1982.

Engineered bamboo is a low cost product manufactured from bamboo. It is designed to be a replacement for wood or engineered wood, but is used only when high load bearing strength is not required because building standards for this type of use have not been agreed by regulatory bodies. Engineered bamboo comes in several different forms, including bamboo scrimber and laminated bamboo, which has three times the structural capacity as normal timber and is defined and regulated by the ASTM International Standards. Engineered bamboo has been used as paneling, vehicle beds, concrete formworks, lightweight building construction and even for shelters after the 2004 tsunami.

The definitive metre bar, manufactured from platinum, was deposited in the Archives of the French Republic by the French legislative assembly on 22 June 1799. In 1812, Barcelona was annexed by Napoleonic France and incorporated into the First French Empire as part of the department Montserrat (later Bouches- de-l'Èbre–Montserrat), where it remained for a few years until Napoleon's defeat. In 1888, Barcelona hosted the Exposición Universal de Barcelona, which led to a great extension of its urbanised area from Parc de la Ciutadella to Barceloneta. In 1897, the city absorbed six surrounding municipalities and the new district of the Eixample (literally "the extension") was laid out.

Early CD copies, however, suffered from being manufactured from third and fourth generation masters. Nichols discovered this when he received a call from Stevie Wonder, who told him that his CD copy of The Nightfly sounded "funny." Nichols penned an essay in Recording Engineer and Producer, criticizing record companies' apparent carelessness in manufacturing the then-nascent format. The Nightfly was reissued on various disc formats four times in recent years, each time with a multichannel mix: on DVD-Audio in 2002, on DualDisc in 2004, on MVI in 2007 and on hybrid multichannel SACD in The Warner Premium Sound series by Warner Japan in 2011.DVD-A.

The Swedish Work Environment Authority's regulation AFS 2004:06, page 10 (in Swedish) Similar legislation requiring ROPS installation has been enacted in Australia, Germany, and Denmark. In the United States, standards for ROPS design and utilization for tractors were first developed in 1967 by the American Society for Agricultural and Biological Engineers. ROPS legislation was passed in 1975, with OSHA requiring that all tractors manufactured from 25 October 1976 onwards be equipped with ROPS. In 1985, the development of a new voluntary safety standard by the American Society of Agricultural and Biological Engineers (S318.10) encouraged an initiative by American tractor manufacturers to equip new tractors over 20 horsepower with ROPS.

Class 351000 (1st generation) train 351-06 (ex-Class 2030 train 2-57) The first generation of Class 351000 trains were built from 1993 to 1999 by Daewoo Heavy Industries and Hanjin Heavy Industries. Because of the flat front ends, the trains are nicknamed "flat face" (납작이). The trains are numbered 351-01~351-22; the trains were renumbered from trains 2-47~2-48, 2-50, 2-55~2-69, and 2-73~2-76. Trains 351-01~341-18 were manufactured from 1993 to 1995 by Daewoo Heavy Industries and Hanjin Heavy Industries to address the opening of the Bundang Line from Suseo Station to Ori Station.

King is a strong supporter of nuclear electricity generation, arguing that it is a safe, technically feasible solution that can help to reduce emissions from the utilities sector now, while the development of alternative low-carbon solutions is incentivised. In the transport sector, King has warned Governments that conventional oil resources are more scarce than they believe and that peak oil might approach sooner than expected. Moreover, he has criticised first generation biofuels due to the effect on food prices and subsequent effect on the developing world. He strongly supports second generation biofuels, however, which are manufactured from inedible biomass such as corn stover, wood chips or straw.

Larger air handlers will be manufactured from a square section steel framing system with double skinned and insulated infill panels. Such constructions reduce heat loss or heat gain from the air handler, as well as providing acoustic attenuation. Larger air handlers may be several meters long and are manufactured in a sectional manner and therefore, for strength and rigidity, steel section base rails are provided under the unit. Where supply and extract air is required in equal proportions for a balanced ventilation system, it is common for the supply and extract air handlers to be joined together, either in a side-by-side or a stacked configuration.

There are also obtained in the distillation light oils and a product resembling vaseline. The residue in the stills consists of a hard, black, waxy substance, which in admixture with India-rubber was employed under the name of okonite as an electrical insulator. From the residue a form of the material known as heel-ball, used to impart a polished surface to the heels and soles of boots, was also manufactured. Mining of ozokerite fell off after 1940 due to competition from paraffins manufactured from petroleum, but as it has a higher melting point than most petroleum waxes, it is still favored for some applications, such as electrical insulators and candles.

The Holden Commodore is a medium to large sedan sold by Holden since 1978. It was manufactured from 1978 to 2017 in Australia and from 1979 to 1990 in New Zealand, with production of the locally manufactured versions in Australia ending on 20 October 2017. Sales of the Commodore ended in 2020, coinciding with the discontinuation of the Holden brand and nameplate entirely. For the original model, Holden replaced the long-serving Kingswood and Premier large executive cars developed in Australia, with another rear wheel drive (RWD) platform that was, however, based on a smaller European design by Opel, re- engineered for Australian conditions.

However, pharmaceuticals are not the largest contributor to the growing amount of gender-altering pollution in the water. Scientists at the University of California San Francisco (UCSF) stated that there are many other sources of chemicals like the ones found in various pharmaceuticals that produce the same effects. “Crop fertilizers along with dairy cows, and various industrial chemicals like BPA” are increasingly seen as a source for pollution causing certain specific effects in those who consume them or products that are manufactured from them. Specifically shifting to industrial chemicals, when they, along with other products containing these chemicals, are disposed of, they end up in landfills.

It is also responsible in re-activating the sale of Isuzu buses in the Philippines when the combined resources of General Motors Corporation, the Yutivo group and its local subsidiary folded up in the middle 1980s by importing directly from the factory of Japan's Isuzu and supplying different bus operators. It is still authorized to import bus and truck chassis on CBU basis and packaging it with the bus or truck body manufactured from its plant. In October 2010 the chairman and owner Narciso O. Morales created a bus company called Del Monte Land Transport Bus Company (DLTBCO). Their buses are also made from the company with High Class Greyhound facilities.

These land versions of artillery were dwarfed by railway guns; the largest of these large-calibre guns ever conceived – Project Babylon of the Supergun affair – was theoretically capable of putting a satellite into orbit. Artillery used by naval forces has also changed significantly, with missiles generally replacing guns in surface warfare. Over the course of military history, projectiles were manufactured from a wide variety of materials, into a wide variety of shapes, using many different methods in which to target structural/defensive works and inflict enemy casualties. The engineering applications for ordnance delivery have likewise changed significantly over time, encompassing some of the most complex and advanced technologies in use today.

Manufacturers frequently describe their products as classic, to distinguish the original from a new variety, or to imply qualities in the product – although the Ford Consul Classic, a car manufactured 1961–1963, has the "classic" tag for no apparent reason. The iPod classic was simply called the iPod until the sixth generation, when classic was added to the name because other designs were also available – an example of a retronym. Coca-Cola Classic is the name used for the relaunch of Coca- Cola after the failure of the New Coke recipe change. Similarly, the Classic (transit bus), a transit bus manufactured from 1982–97, succeeded an unpopular futuristic design.

Expansion of production since 2008 has led to a larger staff of 24, who are now referred to on bottles and in promotional leaflets just as The Men of Tain. Casks maturing at The Glenmorangie Distillery Glenmorangie uses a number of different cask types, with all products being matured in white oak casks which are manufactured from trees growing in Glenmorangie's own forest in the Ozark Mountains of Missouri, United States. These new casks are left to air for two years before being leased to distillers Jack Daniel's and Heaven Hill for them to mature bourbon in for four years. Glenmorangie then uses the barrels to mature their spirit.

In cases where the acceleration stresses have been measured, sensor accelerations at resonant conditions often exceed 250 g and have destroyed the accelerometer. The natural frequencies of thermowell bending modes are dependent upon the dimensions of the thermowell, the compliance (or flexibility) of its support, and to a lesser extent dependent upon the mass of the sensor and the added mass of the fluid surrounding the thermowell. The ASME Performance Test Code PTC 19.3TW-2016 ("19.3TW") defines criteria for the design and application of rigidly supported thermowells. However, these thermowells must be manufactured from bar stock or forged material where certain dimensional requirements and manufacturing tolerances are met.

The Nikkormat FT2, manufactured from 1975 to 1977, added a permanently affixed hot shoe to the top of the pentaprism cover, combined the two PC terminals into one and switched the light meter battery to a non-toxic silver cell, one 1.5 V S76 or SR44. ASA adjustment also featured a lock and an easier slider than previous models. The advance lever was more contoured with an added plastic grip. The FT2's viewfinder also switched to Nippon Kogaku's new standard Type K focusing screen with 3 mm split image rangefinder and 1 mm microprism collar focusing aids plus 12 mm etched circle indicating the area of the meter centerweighting.

Fire extinguisher identification signs are small signs designed to be mounted near a fire extinguisher, in order to draw attention to the extinguisher's location (e.g., if the extinguisher is on a large pole, the sign would generally be at the top of the pole so it can be seen from a distance). Such signs may be manufactured from a variety of materials, commonly self-adhesive vinyl, rigid PVC, and aluminum. In addition to words and pictographs indicating the presence of a fire extinguisher, some modern extinguisher identification signs also describe the extinguishing agent in the unit, and summarize the types of fire on which it may safely be used.

The Dodge Rampage was a subcompact, unibody coupe utility based on Chrysler's L platform and manufactured from 1982 to 1984. First released as a 1982 model, the Rampage was later joined for 1983 by its rebadged variant, the Plymouth Scamp. The Rampage borrowed the car's unibody construction and the front fascia from the sporty 024/Charger variant, and used the suspension from the Omni/Horizon with coil struts and a linkless sway bar at the front, and leaf springs with shock absorbers at the rear. It was available with a Chrysler built and designed 2.2 L carbureted inline-four engine with and a curb weight of around .

Without its plastic bag monopoly, Celloplast's business went into decline, and the company was split up during the 1990s. The Norrköping site remains a plastics production site, however, and is now the headquarters of Miljösäck, a manufacturer of waste sacks manufactured from recycled polyethylene. From the mid-1980s onwards, plastic bags became common for carrying daily groceries from the store to vehicles and homes throughout the developed world. As plastic bags increasingly replaced paper bags, and as other plastic materials and products replaced glass, metal, stone, timber and other materials, a packaging materials war erupted, with plastic shopping bags at the center of highly publicized disputes.

The styling was altered by filling in the scallops either side of the bonnet and reshaping the grille opening to be oval. Because the target market was for rebodying of early model MGs, the Buchanan moulds were cut and extended between the door openings and the rear wheelarches, adding several centimetres to the body length. Racing car kits were also produced, consisting of this type of body plus a fabricated X-frame racing chassis manufactured from steel channel sections welded face to face to form box sections. The chassis used mechanicals from a Holden FJ, with the front suspension crossmember and rear axle assembly being shortened to suit the narrower body.

Early 19th- century painting of pirate boats anchored near Chittagong coast Sitakunda coast featured in a map from 1818 The legends of the area state the sage Bhargava created a pond (kunda) for Sita to bathe in when her husband Lord Ramchandra visited during his exile in the forests. Sitakunda derived its name from this incident. Sitakunda has been occupied by humans since the Neolithic era; tools associated with the prehistoric Assam group have been found throughout the area. In 1886, shouldered celts manufactured from petrified wood were discovered, as reported by Indian archaeologist Rakhaldas Bandyopadhyay in his book Banglar Itihas, or History of Bengal, (volume I, 1914).

The Ak 4 (Swedish: Automatkarbin 4) is a Swedish-made version of the Heckler & Koch G3A3 battle rifle, with a buttstock that is longer, the bolt carrier has a serrated thumb groove to aid in silent bolt closure and fitted with a heavy buffer for higher number of rounds fired before failure. The Ak 4 iron sights feature extended sight adjustments in increments. The rifles were manufactured from 1965 to 1970 by both Carl Gustafs Stads Gevärsfabrik and Husqvarna Vapenfabrik and from 1970 until the end of production in 1985 – exclusively by Gevärsfabrik in Eskilstuna. All Ak 4s are adapted to mount the M203 grenade launcher.

To Pete Smith's voice over commentary, Stan and Ollie-seemingly picked at random in the street, and professing not to have any wood in their possession at the time, produce various props - the contents of a suitcase and their wallets - all manufactured from wood, or containing wood byproducts. (At one point Ollie even indicates that Stan's head is made of wood, to Stan's annoyance.) The props demonstrate the omnipresence of wood products in the American economy, including paper, cellulose-based artificial leather, rayon, witch hazel, and bioplastics in consumer items (this was in the early days of mass-produced plastic, before petrochemical plastics became widespread).

Ash is the only wood used for the manufacture of hurleys, referred to as hurls in parts of Leinster and known as a camán in Irish, the timber sticks used in the game of hurling in Ireland. Hurleys are manufactured from the butt log (bottom 1.5-m of the stem) and from trees ideally of a diameter at breast height around 25–30 cm. Only fast-grown, straight, and knot-free ash can be used for this purpose. Due to the lack of available ash in Ireland, over 75% of the timber needed to produce the 350,000 hurleys required for the game annually must be imported, mostly from Eastern European countries.

The Tri Glide Ultra Classic is the first three-wheeled motorcycle produced by Harley-Davidson since the Harley- Davidson Servi-Car, which was manufactured from 1932 to 1973. The Tri Glide is based on the Harley-Davidson Electra Glide Ultra Classic, a conventional two- wheeled touring motorcycle. Harley-Davidson entered into an agreement in 2008 with Lehman Trikes of Spearfish, South Dakota to provide parts and "conversion services", and final assembly of the Tri Glides was initially completed at Lehman's facility. Company owner John Lehman died in January, 2012, and the Tri Glides are now assembled at the Harley-Davidson plant in York, Pennsylvania.

Both propellant and the explosive were manufactured from chemical fertilizers, though TNT was also tried.Mohannad Sabry,Sinai: Egypt's Linchpin, Gaza's Lifeline, Israel's Nightmare, British Academic Press, 2015, p. 65. Over the next five years of the conflict, a 3-kilogram-warhead-armed version with a strike range of 6–8 kilometres, the Qassam 2, was also producedNajib p. 107 and in an incremental rise, these rocket types were fired towards Israeli settlements along the Gaza Strip: 4 in 2001, 35 in 2002, 155 in 2003, 281 in 2004, and 179 in 2005. By 2005, the Qassam 3 had been engineered with a 12–14 kilometre range and a 15 kilo warhead.

Aveling-Barford were best known for their line of three-point roadrollers including the small GA up to the GC, The "Master Pavior" 3-point roller was one of the most famous diesel rollers. However many other types of earthmoving machinery were designed and manufactured by Aveling Barford in England. A-B were also significant for their all wheel driven and all wheel steering motor graders often using Leyland Trucks running gear as were also producers of ADT models called the RDX Series with 6X6. A line of rigid dumpers was manufactured from 30 tonne RD030 through to the 50 tonne RD050 and eventually a RD55 and RD65 were added.

The story of the Marcegaglia Group began in 1959 in Italy, when Steno Marcegaglia, not quite thirty, together with a partner, through Marcegaglia-Caraffini of Gazoldo degli Ippoliti (Mantua), took over an artisan company producing irrigation pipes and metal guides for rolling shutters. Four years later, in Contino di Volta Mantovana, a company named IPAS was established to manufacture round and flat drawn products with some ten employees. Meanwhile, in the Gazoldo degli Ippoliti factory, where around 30 employees were already working on the production of open profiles, the first tubes from cold-rolled strip were beginning to be manufactured. From 1963 onwards the production activities of these small companies were enhanced and extended with timely, constant investments.

Ascent Solar's thin-film solar modules are manufactured from CIGS cells using copper indium gallium (di)selenide semiconductor (CIGS), which has shown a 10.5% NREL efficiency in real-world conditions. What makes this proprietary technology unique, however, is its relative size, weight and flexibility: Ascent's CIGS panels currently allow for 85 watts/meter, and 48 watts/kg, thereby giving them the greatest power density and weight ratio among available flexible photovoltaic products by a significant margin. This allows for the efficient use of solar power in a range of new contexts, in which size or weight restrictions have previously rendered solar power impracticable: e.g., cell phones, airplanes, unmanned vehicles, consumer electronics, railways, space programs, and off-grid applications.

There are upper limits on the percentage of the world's newsprint that can be manufactured from recycled fiber. For instance, some of the fiber that enters a recycled pulp mill is lost in pulping, due to inefficiencies inherent in the process. According to the web site of the U.K. chapter of Friends of the Earth,Friends of the Earth wood fiber can normally only be recycled up to five times due to damage to the fiber. Thus, unless the quantity of newsprint used each year worldwide declines in line with the lost fiber, a certain amount of new (virgin) fiber is required each year globally, even though individual newsprint mills may use 100% recycled fiber.

Certain samples of Balangoda Man were estimated to be 174 cm tall for males and 166 cm tall for females, a significantly higher figure than modern day Sri Lankan populations. They also had thick skull-bones, prominent supraorbital ridges, depressed noses, heavy jaws, short necks and conspicuously large teeth. Apart from the microliths, hand-axes from Meso-Neolithic times were discovered at Bellanbandi Palassa, which were manufactured from slabs extracted from the leg bones of elephants, and also daggers or celts made from sambar antler. From the same period, this and other sites have also yielded evidence of widespread use of ochre, domesticated dogs, differentiated use of space, inferred burials, and the strong use of fire.

Town residents wore European-style glass beads, silver earrings, armbands, and brooches, rather than traditional Native American beads and pendants made from shell, animal teeth, or animal bone. Cloth matchcoats, blankets, skirts, and shirts supplemented moccasins and garments manufactured from animal skins. Lower Shawneetown's size and connections to neighboring communities allowed traders to establish storehouses for incoming and outgoing goods, managed by European men who lived in the town year-round and sometimes married Native American women. These trading posts attracted local hunters to bring skins and furs to the town, meaning that a post in Lower Shawneetown could do profitable business with dozens of villages without requiring the traders themselves to travel, as they had done previously.

Jaguar XE structure The XE is the first built on the Jaguar Land Rover iQ[Al] (D7a) modular platform, also used for the second generation Jaguar XF (X260) model, the Jaguar F-Pace sports utility vehicle and the Range Rover Velar. The design features double wishbone suspension at the front, with similarities to the system fitted to the XF and F-Type models, the rear features an entirely new subframe mounted multi-link suspension system, marketed as Integral Link. The system costlier to manufacture but allows for greater tuning. The major suspension components are manufactured from aluminium to reduce the unsprung as well as overall vehicle mass and increase the suspension system stiffness.

Authors of medicine in the Tang include Zhen Chuan (d. 643) and Sun Simiao (581–682), the former who first identified in writing that patients with diabetes had an excess of sugar in their urine, and the latter who was the first to recognize that diabetic patients should avoid consuming alcohol and starchy foods. As written by Zhen Chuan and others in the Tang, the thyroid glands of sheep and pigs were successfully used to treat goiters; thyroid extracts were not used to treat patients with goiter in the West until 1890. The use of the dental amalgam, manufactured from tin and silver, was first introduced in the medical text Xinxiu Bencao written by Su Gong in 659.

In the futuristic novel Cloud Atlas and subsequent film, one of the story lines focuses on a genetically- engineered fabricant clone named Sonmi~451, one of millions raised in an artificial "wombtank," destined to serve from birth. She is one of thousands created for manual and emotional labor; Sonmi herself works as a server in a restaurant. She later discovers that the sole source of food for clones, called 'Soap', is manufactured from the clones themselves. In the film Us, at some point prior to the 1980s, the US Government creates clones of every citizen of the United States with the intention of using them to control their original counterparts, akin to voodoo dolls.

At Heysham fuel was produced by the hydrogenation of imported gas oil delivered via a jetty off Heysham Harbour. The plant was designed to produce 300,000 tons per year of petrol and 50,000 tons per year of iso-octane manufactured from butane produced by the hydrogenation process. The iso-octane was used directly as a 100-octane fuel and was also used to enrich 87-octane fuel. Initially, the limited quantities of the 100-octane fuel in the national stockpile required rationing until supplies increased to meet the demand. From March 1940 the RAF converted the Spitfire’s Rolls Royce Merlin engines to use the 100-octane fuel to improve the aircraft’s flying capabilities.

On November 3, 2018, there was a ceremony that inaugurated the launch of the Kowsar assembly line at the Iran Aircraft Manufacturing Industries Company with at least seven being made. President Hassan Rouhani was present as he inspected the Kowsar in the Defense Industry Day event celebration in Isfahan. The Iranian press acknowledged that the design for the Kowsar is based on the Northrop F-5, but also lauded it for being the first fighter jet manufactured from the ground up by a Muslim nation and referred to it as a Fourth generation fighter. There were reports of a crash by an Iranian-operated F-5 days after the Kowsar's existence was announced.

Prior to the development of natural gas supply and transmission—during the 1940s and 1950s in the United States and during the late 1960s and 1970s in the United Kingdom and Australia—virtually all gas for fuel and lighting was manufactured from coal. Town gas was supplied to households via municipally owned piped distribution systems. Originally created as a by-product of the coking process, its use developed during the 19th and early 20th centuries tracking the industrial revolution and urbanization. By-products from the production process included coal tars and ammonia, which were important chemical feedstock for the dye and chemical industry with a wide range of artificial dyes being made from coal gas and coal tar.

A sphere made from a single crystal of synthetic yttrium iron garnet acts as a resonator. These spheres are on the order of 0.5 mm in diameter and are manufactured from slightly larger cubes of diced material by tumbling, as is done in the manufacture of jewelry. The garnet is mounted on a ceramic rod, and a pair of small loops around the sphere couple fields into and out of the sphere; the loops are half-turns, positioned at right-angles to each other to prevent direct electromagnetic coupling between them and each is grounded at one end. The field from an electromagnet changes the resonance frequency of the sphere and hence the frequency it will allow to pass.

Besides its extensive collection of telephones manufactured from the 1900s through the 2000s, the Jefferson Barracks Telephone Museum also contains a working Central Office Step Switch, military telephones from World War II through the Vietnam War, hundreds of pieces of telephone-related equipment and tools, a telephone pole complete with climbing equipment, hundreds of pieces of telephone-related memorabilia from the 1880s through the 2000s, a large variety of novelty telephones, a special portable switchboard set up when U.S. Presidents Carter, Ford, Nixon and Johnson were visiting St. Louis and a sculpture of Alexander Graham Bell and history of the invention of the telephone. The self-guided, accessible museum has many hands-on, how-things-work displays.

It became increasingly popular in Europe and large numbers of shotguns and revolvers (often called Lefaucheux guns after their inventor whoever the maker was), were manufactured from the mid-1850s until the 1890s. They were quicker and easier to load than percussion weapons with loose black powder, percussion caps and bullet; and they were also much more likely to fire reliably when wet. Pinfire cartridges were available in a large number of sizes for various types of weapon. While pinfire shotguns declined from the early 1860s after the introduction of mass- produced centerfire shotgun cartridges, pinfire revolvers in particular became very successful and widespread, being adopted by the armies of France, Italy, Spain, Switzerland, Sweden and others.

In it, a fear-intensifying hallucinogenic drug is manufactured from blue flowers. The drug is used by Ra's al Ghul and Dr. Jonathan Crane (the Scarecrow), who plan to terrorize Gotham City by weaponizing the drug into a concentrated powder form and release it into the city's water supply. Blue flower is again used as the source of a fictitious mind-altering drug, here called Substance D, in the 2006 adaptation of Philip K. Dick's novel A Scanner Darkly. A display of blue Baptisia australis flowers is used as a symbol of private support for an annual night of extrajudicial killings that serves as the central plot device of 2013 motion picture The Purge.

The 92SB, initially called 92S-1, was specifically designed for the USAF trials (which it won), the model name officially adopted was the 92SB. Features added include a firing pin block (thus the addition of the "B" to the name), ambidextrous safety levers, 3-dot sights, and relocated the magazine release catch from the bottom of the grip to the lower bottom of the trigger guard. The later relocation of the magazine release button means preceding models (92 & 92S) cannot necessarily use later magazines, unless they have notches in both areas. A compact version with a shortened barrel and slide and 13-round magazine capacity known as the 92SB Compact was manufactured from 1981 to 1991.

1920 Maiflower The Maiflower was an English automobile manufactured from 1919 until 1921 in GloucesterDavid Burgess Wise, The New Illustrated Encyclopedia of Automobiles by or for The Maiflower Motor Company. Named for the partners who built them, army captains Campbell Gwynne Price and Arthur Isaac Flower,Notice, The London Gazette, page 1230, 10 February 1922 the car was based on the Model T Ford, although a newly fabricated rear end and alterations to the front transverse suspension provided variations on the standard Ford chassis. Two and four seat tourer and coupé bodies were offered. Price and Flower's partnership was dissolved as of 4 February 1922 and Price was to continue in the same business at Commercial Road, Gloucester.

The primary innovation associated with Acheulean hand-axes is that the stone was worked symmetrically and on both sides. For the latter reason, handaxes are, along with cleavers, bifacially worked tools that could be manufactured from the large flakes themselves or from prepared cores. Tool types found in Acheulean assemblages include pointed, cordate, ovate, ficron, and bout-coupé hand-axes (referring to the shapes of the final tool), cleavers, retouched flakes, scrapers, and segmental chopping tools. Materials used were determined by available local stone types; flint is most often associated with the tools but its use is concentrated in Western Europe; in Africa sedimentary and igneous rock such as mudstone and basalt were most widely used, for example.

A 428 Super Cobra Jet engine with oil cooler was standard equipment when the "Drag Pack" option (which came when selecting either a 3.91 or 4.30 rear end gear ratio) was ordered with cars manufactured from 13 November 1968. In addition, while the CJ and SCJ engines used the same autothermic piston casting, the piston- to-bore clearance specification between the CJ and SCJ 428 engines is slightly different, with the SCJ engines gaining a slightly looser fit to permit higher operating temperature. Horsepower measurements at a street rpm level remained the same. The 428 Super Cobra Jet engine was never offered with factory air conditioning due to the location of its engine oil cooler.

Cad and the Dandy is an independent tailoring company based in London, England with premises on Savile Row, the City and New York City. It sells bespoke suits, manufactured from a range English and Italian fabrics, and using traditional tailoring methods, generally at better value than other Savile Row houses. The company was founded in 2008 by James Sleater and Ian Meiers, two City of London bankers who were both made redundant from their jobs in the 2008 financial crisis. It has attracted local, national and international press coverage, including being listed by The Guardian in the Courvoisier Future 500, and in July 2010 the founders won the Bento Entrepreneur of the Year Award at the Macworld Awards.

Mercedes-Benz 380 SE short wheelbase Mercedes-Benz 560 SEL long wheelbase The W126 series premiered in September 1979, launching in March 1980 as a 1980 model and late 1980 as a 1981 model in the US and Australia replacing the W116 line. The W126 line featured improved aerodynamics and enlarged aluminum engine blocks. In Australia in 1981, the W126 S-Class won Wheels magazine's Car of the Year award. The W126 was manufactured from 1979 through 1991 with a mid-cycle update. Coupé models based on the S-Class were reintroduced with the W126 (380/500 SEC). Total sales of the W126 S-Class sedans reached 818,036 units, with an additional 74,060 coupes sold.

The first full scale missile domes of transparent yttria manufactured from nanoscale ceramic powders were developed in the 1980s under Navy funding. Raytheon perfected and characterized its undoped polycrystalline yttria, while lanthana-doped yttria was similarly developed by GTE Labs. The two versions had comparable IR transmittance, fracture toughness, and thermal expansion, while the undoped version exhibited twice the value of thermal conductivity. Renewed interest in yttria windows and domes has prompted efforts to enhance mechanical properties by using nanoscale materials with submicrometer or nanosized grains. In one study, three vendors were selected to provide nanoscale powders for testing and evaluation, and they were compared to a conventional (5 μm) yttria powder previously used to prepare transparent yttria.

The doll is 23 centimetres (9 inches) tall and there are three different versions of her: "Dizzy Daisy", who has a stiff body and unbendable legs, with just her arms and legs swinging up and down from the hips and shoulders; a basic bodied version with bendable legs, as well as the swivelling arms and leg joints; and an active version called "Dashing Daisy", whose body is the most bendable. Her hair colour has ranged from different shades of blond to brunette and red. Other dolls were manufactured from the same moulds: "Havoc, Super Agent" was released in 1976; and Daisy's best friend, "Amy", who was only available by redeeming daisy tokens from Daisy packages.

The Renault FT, the first "modern" tank to enter production French development into tanks began during World War I as an effort to overcome the stalemate of trench warfare, and largely at the initiative of the manufacturers. The Schneider CA1 was the first tank produced by France, and 400 units were built. The French also experimented with various tank designs, such as the Frot- Laffly landship, Boirault machine and Souain experiment. Another 400 Saint- Chamond tanks were manufactured from April 1917 to July 1918, however these tanks were largely underpowered and of limited utility due to the design of the caterpillar tracks, which were too short in comparison with the tank's length and weight.

The social anthropologists Filippo and Caroline Osella say that the Ezhavas "... consisted in the mid-nineteenth century of a small landowning and titled elite and a large mass of landless and small tenants who were largely illiterate, considered untouchable, and who eked out a living by manual labour and petty trade." A. Aiyappan, another social anthropologist and himself a member of the caste, noted the mythical belief that the Ezhava brought coconut palms to the region when they moved from Ceylon. Their traditional occupation, or avakasam, was tending to and tapping the sap of such palms. This activity is sometimes erroneously referred to as toddy tapping, toddy being a liquor manufactured from the sap.

The Star Model PD is a compact and lightweight semi-automatic pistol which was manufactured from 1975 to 1990 by the firearms manufacturing company Star Bonifacio Echeverria, S.A., located in the city of Eibar in the Basque region of Spain.Star Firearms P-Series Pistols The Model PD can be loaded with six .45 ACP pistol cartridges in the detachable internal magazine, plus one in the chamber, and was very popular with police and civilian users in the self- defense and backup gun role, especially in the United States. The Star PD improved on its predecessor (Star Model PKM) by using a low-profile adjustable rear sight and by removing material from the slide and other small changes.

These patents were translated later into a commercial product (IntegraTM) by Integra LifeSciences Corp., a company founded in 1993. IntegraTM grafts received FDA approval in 1996 and since then are being applied worldwide to treat patients who are in need of new skin to treat massive burns, those undergoing plastic surgery of the skin, and patients with chronic skin wounds as well as others who suffer from certain forms of skin cancer. In clinical practice, a thin graft sheet manufactured from the active collagen scaffold is placed on the injury site, which is then covered with a thin sheet of silicone elastomer that protects the wound site from bacterial infection and dehydration.

The SEAT 1500 was a Spanish-built 6-seater model of saloon and estate cars, based on the Italian Fiat 2300 and using a 1481 cc engine from the Fiat 1500. The 1500 was the successor to the SEAT 1400 C; it was manufactured from 1963 to 1973, with the five door estate ("Familiar") version arriving in 1965. Apart from the larger engine, differences between the 1500 and the C version of its predecessor were limited to minor details such as a speedometer that now read up to 140 km/h (87 mph). There was also a '1500 pick-up' offered, and the coach builder ONECA developed a long-wheelbase 'pullman' version.

The W76 is a United States thermonuclear warhead, designed for use on the UGM-96 Trident I sea-launched ballistic missiles (SLBMs) and subsequently moved to the UGM-133 Trident II as Trident I was phased out of service. The first variant, the W76 mod 0 (W76-0) was manufactured from 1978 to 1987, and was gradually replaced by the W76 mod 1 (W76-1) between 2008 and 2018, completely replacing the Mod 0 in the active stockpile. In 2018 it was announced that some Mod 1 warheads would be converted to a new low-yield W76 mod 2 (W76-2) version. The first Mod 2 warheads were deployed in late 2019.

Quattroporte Evoluzione (rear view) The fourth generation of the Quattroporte (Tipo AM337) was manufactured from 1994 to 2001 and was the first car to be produced under the Fiat ownership after Alejandro de Tomaso sold his entire holding to the Italian marque in 1993. It was built on an evolved and stretched version of the Biturbo saloon's architecture, and used the twin-turbocharged V6 and later the new AM578 V8 engine from the Shamal flagship grand tourer. For this reason, the car retained very compact exterior dimensions, and is smaller than any of its predecessors and successors. As the designer's signature angular rear wheel arches gave away, the wedge-shaped aerodynamic () body was penned by Marcello Gandini.

A typical rotary dial key telephone: the Western Electric eighteen-button Call Director, manufactured from 1958 to the early '80s. Before the advent of large-scale integrated circuits, key systems were typically composed of electromechanical components (relays) as were larger telephone switching systems. The systems marketed in North America as the 1A, 6A, 1A1 and the 1A2 Key System are typical examples and sold for many decades. The 1A family of Western Electric Company (WECo) key telephone units (KTUs) were introduced in the late 1930s and remained in use to the 1950s. 1A equipment was primitive and required at least two KTUs per line; one for line termination and one for station (telephone instrument) termination.

Olympus Pen FT with 38mm/F1.8 The Olympus Pen F series was introduced and produced by Olympus of Japan between 1963 and 1966. The System consisted of the original Olympus Pen F, later the behind-the-lens metering Pen FT, 1966–1972; and the non-metered version of the FT, known as the Olympus Pen FV, which was manufactured from 1967 to 1970. The design considerations used were unusual. The camera produced a half-frame 35 mm negative; it used a Porro prism as a design-replacement for the conventional pentaprism thus producing the 'flat top' appearance; and the view through the viewfinder was of 'portrait' orientation' (unlike standard 35mm SLRs which had 'landscape' orientation).

Flt. Lt. Donald Smith, RAAF, was the final production Spitfire XII. EB-H in the background shows the fixed tailwheel of an ex-Spitfire VC airframe. The Mk XII was the first Spitfire powered by a Griffon engine to go into service. The first of 100 Supermarine- built production aircraft started appearing in October 1942; two RAF squadrons in total were equipped with the XII. Mk XIIs were manufactured from Mk VC and Mk VIII airframes: early production aircraft had the fixed tail wheels, Dunlop AH2061 pattern "five spoke" mainwheels and small elevator balances. They had a single 85 gal main fuel tank, giving a short range of little over on internal fuel.

5906TSW The Model 5903 was manufactured from 1990 to 1997, and featured an aluminum alloy frame and a stainless steel slide with a 15-round double-stack magazine. Produced from 1989 to 1998, the Model 5904 has an aluminum alloy frame and blued carbon steel slide, also with a 15-round magazine, and inspired two other derivative pistols, the Smith & Wesson Models 915 and 910. The Model 5905 featured a carbon steel (blued) slide and frame, and was produced in 1991 only in very limited numbers. The Model 5906, produced from 1989-1999, is an all-stainless steel model, and is therefore significantly heavier than the other models in the 59XX series.

Minibrix were construction kits manufactured from 1935 to 1976 in the UK. Developed in 1935, they enabled children to build their own miniature houses. Like the later and more famous construction toy, Lego, Minibrix consisted primarily of interlocking bricks with moulded studs on the surface, but being invented before the availability of modern plastics they were made of hard rubber which had the necessary ability to deform under pressure to allow firm interlocking of studs and holes. Minibrix were made by the Premo Rubber Company which traditionally made rubber shoe heels. Premo was a subsidiary of the I.T.S. Rubber Company, which had been founded in 1919 by Arnold Levy, and was located at Sandringham Road, Petersfield, Hampshire, England.

The old Greeves motorcycles were ideal for the new "classic" (twinshock) class of trials but parts were scarce and expensive, so trials rider Richard Deal started producing replica parts, and then a replica motorcycle called the Anglian. In May 1999, after gaining control of the trademarks of the Greeves name in the UK, USA and Europe, a new Greeves company was founded in Chelmsford which restarted production of mainly trials models. The new company started building and rebuilding Greeves motorcycles from 2000 and established a replacement parts division. Continuing a tradition started by Bert Greeves, the heads, barrels, crankcases, and aluminium frame beams were manufactured from new castings produced in a specialist alloy foundry.

Type 30 scabbards went from metal (pre-1942), to vulcanized fibre (1942-43), and finally to wood or bamboo (1944-45). The design was intended to give the average Japanese infantryman a long enough reach to pierce the abdomen of a cavalryman. However, the design had a number of drawbacks, some caused by the poor quality of forgings used, which tended to rust quickly and not hold an edge, and to break when bent. The weapon was manufactured from 1897 to 1945 at a number of locations, including the Kokura Arsenal, Koishikawa Arsenal (Tokyo) and Nagoya Arsenal, as well as under contract by private manufacturers including Matsushita, Toyoda Automatic Loom and others.

Nikomat FTN The Nikkormat FTN was manufactured from 1967 to 1975. It simplified the lens mounting procedure of the rabbit ear Nikkor lenses. The meter coupling pin on the camera still had to be aligned with the meter coupling shoe on the lens, but the lens maximum aperture no longer had to be manually preset on the FTN. Instead, the lens aperture ring had to be turned back and forth to the smallest aperture (largest f-stop number) and then to the largest (smallest number) immediately after mounting to ensure that the lens and the FTN couple properly (Nippon Kogaku called it indexing the maximum aperture of the lens) and meter correctly.

Rook, Lewis chessmen, at the British Museum in London Both archaeological finds and written sources testify to the fact that the Vikings set aside time for social and festive gatherings. Board games and dice games were played as a popular pastime at all levels of society. Preserved gaming pieces and boards show game boards made of easily available materials like wood, with game pieces manufactured from stone, wood or bone, while other finds include elaborately carved boards and game pieces of glass, amber, antler or walrus tusk, together with materials of foreign origin, such as ivory. The Vikings played several types of tafl games; hnefatafl, nitavl (nine men's morris) and the less common kvatrutafl.