125 Sentences With "knife blade" | Random Sentence Generator

This caused it to cut through the water like a knife blade.

Then, place the garlic under the knife blade and smash down on it.

A 7-inch case knife blade with a broken handle was also excavated from the site in June.

A bloody sheet with a broken knife blade was also found in the room, the court documents state.

The suitcase from which she was recovered contained bloody towels, duct tape, a knife handle, and a knife blade.

It was arguably the last time true independent culture has walked that fine knife blade between authentic independence and commerce.

The next thing I remember is waking up to a very sharp stabbing pain like a knife blade between my legs.

A team of doctors have been left shocked after a Kansas teenager miraculously survived a 10-inch knife blade to the face.

"Hayes reversed his knife blade and lunged at Lt. Ceravolo in an attempt to stab him in the chest," the motion says.

Officials said Crawley stabbed her so hard that a knife blade was still wedged into her back when the autopsy was performed.

Its newest is a cross-cultural affair, made with a Japanese santoku-shaped seven-inch blade instead of a standard chef's knife blade.

Instead, scrape the stinger out sideways using your fingernail, the edge of a credit card, a dull knife blade or other straight-edged object.

Kvitova, a two-time Wimbledon champion, sustained the injuries as she pulled the knife blade away from her throat; two fingers received nerve damage.

Though I suppose when you're a mere knife-blade away from collecting Social Security, no one can blame you for looking a wee bit tired.

Good Housekeeping noted that, regardless of manufacturer directions, hand washing and drying maintains the sharpness of a knife blade longer than running it through the dishwasher.

About 403 percent—along with a slight added concern that the edge of the knife blade could potentially drag bacteria from the skin into the flesh.

Investigators were able to retrieve several items critical to the case, including a knife blade, a thick chain, burned clothing, a shoe and an argyle sock.

"One of the rivets from the handle is still present," explained Evans, noting that it is the third knife blade found in the area of the cellar.

The dishes, glasses and flatware must correspond with the proposed menu, and those items must be laid out perfectly, down to the direction of the knife blade.

"The only way it can really be relevant is if it has a kind of serrated knife blade that they say was consistent with the wounds," he says.

Will a halter strap, a knife blade and charred pieces of clothing recently dug up from a burn pit exonerate Cal Harris for the murder of his estranged wife?

Oh and Comer, of course, remain uniformly terrific, Oh letting Eve unravel like a spool of thread under the mounting tension and Comer turning Villanelle's knife-blade grin ever sharper.

There she is — chicly swathed in a gray turtleneck and black skirt, as slender and sharp as a knife blade — holding a matching, slim book that you know she's not really reading.

Her voice slashing the air like a knife blade, she cites the deaths of the black men at the hands of the police that have blanketed the headlines for more than a year.

A tiny knife blade, for cutting the foil wrapping on the bottle's neck, can be found in the handle, which can be crafted in a variety of different materials, including wood and metal.

Mr. Smith had been behind bars in California since 233 for abducting and stabbing a San Diego woman, who escaped death by a fraction of an inch as the knife blade missed her heart.

To find her sisters, Rich says, she "read the book of myths, / and loaded the camera, / and checked the edge of the knife-blade" before making her descent: I came to explore the wreck.

Spring-loaded pliers, a knife blade that's about 30 percent longer than what you'll find on the competition's tool, and the ability to open the Center-Drive with just one hand are welcome improvements—but not entirely new.

Other male skeletons found at the site were buried with their arms by their sides, but T US 380 had his right arm placed across his torso, and a knife blade with the butt aligned with his amputated wrist.

" In the Times, Lakshmi describes being raped by her boyfriend when she was 16 years old, writing that she fell asleep on his bed and woke up "to a very sharp stabbing pain like a knife blade between my legs.

But instead of using them to defend itself, or hunt for food, the scissors, bottle opener, flat head screwdriver, can opener, rope saw, and knife blade can be used for less survival-focused tasks like opening a beer bottle, or shaving yourself a nice marshmallow-roasting stick.

It consists of a knife blade which is used to cut the web when the maximum roll diameter is reached. The knife blade is actuated either by means of pneumatic or electrical actuators.

She was stabbed an additional ten times by Chand, before the knife blade bent 90 degrees and became useless.

A diamond knife blade used for cutting ultrathin sections (typically 70 to 350 nm) for transmission electron microscopy. The cutting edge of a disposable blade for a microtome under a microscope. The selection of microtome knife blade profile depends upon the material and preparation of the samples, as well as the final sample requirements (e.g. cut thickness and quality).

On a vertical band knife machine usually a narrow width band knife blade is used, the most common width being 10mm. The length of the band knife blade depends on the supplier of the band knife machine. The dimensions are indicated on a small metal tag pasted or riveted on the machine. The vertical machine band knife blade is most commonly a "double bevel, double edge DBDE" execution to enable cutting while advancing the table and also while retracting the work table, while as the "double bevel, single edge DBSE" execution cuts only in one direction.

A knife blade can peel the edges. Sphene is found in Half Dome Granodiorite. The grains are honey-colored, and large at across. Uranium is also present.

Mikhail Fonotov wrote in his book Native Olden Times (): > A knife blade? Yes, there was the bulat blade. > And then there was the tank's armored steel. > And then there was the rocket steel.

As the lock on the original electrician's knife was mostly to hold a screwdriver blade open (the knife blade, itself was secured by a slip joint method), Walker's refinements prevented the knife blade from closing on the user's hand and converted it into a true lock. To release the lock, the user presses the lock bar back toward the handle side, at which time the blade is free to close. In the closed position the lock bar (leaf spring) rests alongside the handle and the blade.

Charlie forced Dean to drop his pants and was disgusted to see Dean had an erection. Charlie forced Dean to kneel and fellate the knife blade. Suddenly, Dean collapsed with an epileptic seizure. Charlie slit his throat.

Amada - Temple founded by Tuthmosis III and Amenophis II of the 18th dynasty Bronze knife blade inscribed with cartouche of Thutmose III, "Beloved of Min of Koptos". 18th Dynasty. Probably foundation deposit no.1, Temple of Min, Koptos, Egypt.

Drop point knife blade Drop point is a style of knife blade that slopes on the spine of the blade from the handle of the knife to the tip of the blade. This allows the spine of the blade (where the blade is thicker, and thus stronger) to continue forward to the tip of the blade. This way the point is also aligned with the center axis of the knife, eliminating any pitch momentum when stabbing. The curve on the top of a drop-point blade is always convex, which is what distinguishes it from a clip point blade.

Prior to cutting by microtome, biological materials are usually placed in a more rigid fixative, in a process known as embedding. This is achieved by the inflow of a liquid substance around the sample, such as paraffin (wax) or epoxy, which is placed in a mold and later hardened to produce a "block" which is readily cut. The declination is the angle of contact between the sample vertical and knife blade. If the knife blade is at right angles (declination=90) the cut is made directly using a pressure based mode, and the forces are therefore proportionally larger.

The knife blade that strikes the sacrifice is rubber. She survives unhurt. A man in the cult covertly snaps a photo of the event. Later, at the doll shop, Rick spots the Donna doll, pinned to the wall through the heart, but he can't remove the pin without being seen.

India is another traditional source for stones. Ceramic hones are also common, especially for fine grit size. Japanese water stones (both artificial and natural) come in very fine grits. Before use, they are soaked in water, then flushed with water occasionally to expose new stone material to the knife blade.

The rod guides the sharpening stone to maintain a consistent angle. The angle can be adjusted by moving the guide posts up or down. This sharpener uses a diamond dust coated stone to remove metal from the knife blade. Clamp-style sharpening tools use a clamp with several holes with predefined angles.

Swiss military issue multi-tool knife Multi-tool knives formerly consisted of variations on the American camper style or the Swiss Army knives manufactured by Victorinox and Wenger, however, the concept of a multitool knife has undergone a revolution thanks in part to an avalanche of new styles, sizes, and tool presentation concepts. These new varieties often incorporate a pair of pliers and other tools in conjunction with one or more knife blade styles, either locking or nonlocking. Multitool knives often have more than one blade, including an assortment of knife blade edges (serrated, plain, saws) as well as a myriad of other tools such as bottle openers, corkscrews, and scissors. A large tool selection is the signature of the Swiss Army Knife.

The blade of both models has two versions plain and partially serrated. The serrations are used for cutting ropes and fabric fibers for survival techniques. The scabbard has a strip of diamond sharpener used for field sharpening of knife. The handle end has a glass breaker tip which is actually the end of the knife blade tang.

One copper knife blade was also discovered at the site. The other prehistoric sites include a Roman cremation grave in Rogget, early medieval finds in Gaicht and a burial ground in Gauchete. The settlement of Rogget northeast of Wingreis was first mentioned in 1235. During the 14th century it was abandoned, probably due to a massive rock slide.

Some extremely rare finds amongst the shipwreck were a plaited basket, a piece of rope fashioned into a simple eye splice, a little brush, a knife blade, a spade, and a couple of toggles. Also found were parts of a human skeleton, possibly of a Carthaginian sailor trapped by the ship's ballast. File:Marsala ship 1.jpg File:Marsala ship 2.

In 1918, Captain Rupert Hughes of the U.S. Army submitted a patent application for a specialized automatic- opening trench knife of his own design, the Hughes Trench Knife.Hughes, Rupert. Letters Patent No. 1,315,503 issued September 9, 1919, Washington, D.C.: United States Patent Office This was a curious device consisting of a folding spring-loaded knife blade attached to a handle which fastened to the back of the hand and was secured by a leather strap, leaving the palm and fingers free for grasping other objects.Hughes, Rupert, Letters Patent No. 1,315,503 issued September 9, 1919, Washington, D.C.: United States Patent Office Pressing a button on the handle automatically extended a knife blade into an open position and locked position, allowing the knife to be used as a stabbing weapon.

Jerrygibbsite, in pure form, is a violet-pink mineral with a light pink streak. It has a calculated density of 4.045 g/cm3, and a tested density of 4.00 g/cm3, agreeing favorably, since measurements used to test density have few significant figures. It has a hardness of about 5.5, that of a knife blade. The general luster is vitreous, or shiny.

CPM S35VN – A stainless steel using the powder metallurgy process. Reeve worked with the Crucible Steel Company to develop this steel specifically for the cutlery industry. Kubuli serrations – Serrations placed in a knife blade, alternating from both left and right sides of the blade, forming two rows of serrations that are not collinear.Larsen, John, Tactical Knives, “Combat Master”, January 2008, pages 10–14.

Composed of young people from right-wing backgrounds, it has been called the "first urban guerrilla group in Argentina".Daniel Gutman, Tacuara, historia de la primera guerrilla urbana argentina A tacuara was a rudimentary lance used by gaucho militias (known in Argentina as Montoneras) during the Argentine war of independence. It consisted of a knife blade tied to a stalk of taquara cane.

Traces of a sedative were later detected in his blood.John (1989), 2-3. The police found a scattered trail of blood that led to the seventh floor of Block 12. Stepping into the common corridor from the stairwell, Inspector Pereira noticed an eclectic mix of religious symbols (a cross, a mirror, and a knife-blade) on the entrance of the first flat (unit number 467F).

It lasted until the Spanish conquest in 1533. The Inca absorbed much technical skill from the cultures they conquered, and disseminated it, along with standard shapes and patterns, throughout their area of influence, which extended from Quito, Ecuador to Santiago, Chile. Inca stonework is notably proficient; giant stones are set so tightly without mortar that a knife blade will not fit in the gap.Stone- Miller, p.

The balisong was commonly used by Filipinos, especially those in the Tagalog region, as a self-defense and pocket utility knife. Hollow-ground balisongs were also used as straight razors before conventional razors were available in the Philippines. In the hands of a trained user, the knife blade can be brought to bear quickly using one hand. Manipulations, called "flipping", are performed for art or amusement.

If the angle is adjusted to zero, the knife cut can often become erratic, and a new location of the knife must be used to smooth this out. If the angle is too large, the sample can crumple and the knife can induce periodic thickness variations in the cut. By further increasing the angle such that it is too large one can damage the knife blade itself.

Knife blade mass production Knife blades can be manufactured from a variety of materials, each of which has advantages and disadvantages. Carbon steel, an alloy of iron and carbon, can be very sharp. It holds its edge well, and remains easy to sharpen, but is vulnerable to rust and stains. Stainless steel is an alloy of iron, chromium, possibly nickel, and molybdenum, with only a small amount of carbon.

He was then arrested and taken into custody. Forensic pathologist Martin Sage performed the autopsy the next day, and found Elliott died from blood loss. Two wounds pierced her heart and one lung, with other wounds to her neck and throat severing the main artery and the major vein. In total she received 216 separate injuries, mostly stab wounds from a knife blade, with some inflicted by scissors.

Kentucky- born Sylvester Weaver was in 1923 the first to record the slide guitar style, in which a guitar is fretted with a knife blade or the sawed-off neck of a bottle. The slide guitar became an important part of the Delta blues.Clarke, p. 138. The first blues recordings from the 1920s are categorized as a traditional, rural country blues and a more polished city or urban blues.

Scott McKowen is an American illustrator, art director, and graphic designer. He was born and raised in Michigan, and his studio is in Stratford, Ontario. He designs posters for theaters and other performing arts companies across North America, and he creates illustration for books and magazines. He is known for his drawings on scratchboard, a process in which he uses a knife blade to carve white lines onto a black board.

Large sipes are usually built into the tread during manufacturing. Sipes may also be cut into the tread at a later date, called "microsiping". Bandag developed a machine for microsiping which places a curved knife blade at a slight angle on a rotating drum. The drum is placed so when it is pressed against the tread the tire is pressed into an exaggerated hollow, as if driving down a rail.

A diamond knife blade used for cutting ultrathin sections (typically 70 to 350 nm) for transmission electron microscopy. Biological tissue is often embedded in a resin block then thinned to less than 100 nm on an ultramicrotome. The resin block is fractured as it passes over a glass or diamond knife edge. This method is used to obtain thin, minimally deformed samples that allow for the observation of tissue ultrastructure.

Hand-clicking skills are still needed in low-volume production of bespoke, hand-made shoes or as sales- samples for factory production, although these would not warrant the expense of brass-binding used to protect the edges of the pattern from being pared away. A vintage Rap Stick from 1940s used for sharpening a clicker's knife The clicker's knife regularly needed sharpening, which was done with an implement called a rap stick. To use a rap stick, a right-handed operator would hold it in the left hand, resting the stick on the workbench for support, stroking the blade rapidly but gently back and forth on the abrasive surface to maintain a sharp edge whilst hand-cutting, in a similar fashion to a butcher's knife and sharpening steel. The knife blade shown is a lighter medical item but approximates the shape of a clicker's knife blade, fitting into a comfortable wooden handle with screw-activated jaws.

This herb is also called Nagody, it means that for God or weddings, a variety of coat of arms was created. Shield in pole split in the right red - wolf silver knife blade down toward the center rotated in the left blue - half of silver horseshoe nailed to a one and a half gold cross, the lower arm to the right, the jewel foot armed with a spur, in knee bent, foot to the left.

Turner's fiddle playing in W. C. Handy's band so impressed Cannon that he decided to learn to play the fiddle himself. Lee, a guitarist, taught Cannon his first folk blues, "Po' Boy, Long Ways from Home", and showed him how to use a knife blade as a slide, a technique that Cannon adapted to his banjo playing.Barlow, William (1989). "Looking Up at Down": The Emergence of Blues Culture. Temple University Press. pp. 214–17. .

The Knife Grinder by Massimiliano Soldani (c.1700), Albertinum, Dresden A railway camp cook sharpens a knife blade on a stone wheel, 1927 Knife sharpening is the process of making a knife or similar tool sharp by grinding against a hard, rough surface, typically a stone, or a flexible surface with hard particles, such as sandpaper. Additionally, a leather razor strop, or strop, is often used to straighten and polish an edge.

Diamond knife blade A diamond knife is a very sharp knife in which the edge is made from diamond, invented by Humberto Fernández-Morán in 1955. Diamond knives are used for medical and scientific applications where an extremely sharp and long-lasting edge is essential. The knives are very expensive to purchase, depending on the quality and size of the knife; in addition the knives must be professionally sharpened as the edge dulls.

Reinerite is most commonly found as a sky blue colored mineral, however, it may also be a light yellowish green color. Reinerite has a relative hardness of 5 to 5.5 on the Mohs Scale which is equivalent to that of a knife blade and or shard of glass. It has a density of 4.27 g/cm3, and it exhibits a nonmetallic luster that may be described as glassy or vitreous.Lutgens, Frederick, and Edward Tarbuck.

Hoop cheese was once so common that a device called a hoop cheese cutter was manufactured and used in general stores during the late 19th and early 20th centuries. The hoop cheese cutter was patented in 1905 in the United States and resembled a turntable with a knife blade suspended above it. It was built by scale companies of the period to cut to order the exact amount of cheese a customer wanted.

Another style of folding, non-locking knife is the friction-folder. These use simple friction between the blade and scales to hold the blade in place once opened; an example is the Japanese higonokami. An electrician's knife typically has a locking screwdriver blade but a non- locking knife blade. The two-blade Camillus Electrician's knife (the US military version is known as a TL-29) was the inspiration for the development of the linerlock.

The leading edge of the roll cap or jaw acts as a hole cover when closed, and rests in a groove milled across the open blade tang in order to lock open. Figures C and D are known as sliders or sliding knives. The knife blade must be pushed with the button along the length of the handle, finger pressure must overcome friction. The lock buttons on C & D are not automatic releases.

Among the earliest contemporary examples is the Swiss Army knife as supplied by makers Victorinox and Wenger. The actual version supplied to the Swiss army includes a knife blade, a reamer, a bottle- opener–screwdriver–wire stripper, and a can-opener–screwdriver. Besides Victorinox and Wenger, many other manufacturers now make similar knives. Other versions may include items like a nail file, tweezers, folding scissors, a tooth pick, a magnifying glass, screwdriver bits and others.

Profiles of microtome knives. Generally, knives are characterized by the profile of the knife blade, which falls under the categories of planar concave, wedge shaped or chisel shaped designs. Planar concave microtome knives are extremely sharp, but are also very delicate and are therefore only used with very soft samples. The wedge profile knives are somewhat more stable and find use in moderately hard materials, such as in epoxy or cryogenic sample cutting.

Ripsaw is a musical genre which originated in the Turks and Caicos Islands, specifically in the Middle and North Caicos. A very closely related variant, rake-and-scrape, is played in the Bahamas. Its most distinctive characteristic is the use of the common handsaw as the primary instrument, along with various kinds of drums, box guitar, concertina, triangle and accordion. The saw is played by scraping an object, usually an old knife blade, along the saw's teeth.

Luke throws himself on the attacker and his hand goes into the knife blade causing him an extremely serious injury. Not long before Luke had sent a letter to Cora declaring his love. Cora receives this letter around the same time she receives one from Will, which although very differently, shows his love for her too. She is angry as she feels she has only just escaped her husband and now she must be tied down again.

A physical change involves a change in physical properties. Examples of physical properties include melting, transition to a gas, change of strength, change of durability, changes to crystal form, textural change, shape, size, color, volume and density. An example of a physical change is the process of tempering steel to form a knife blade. A steel blank is repeatedly heated and hammered which changes the hardness of the steel, its flexibility and its ability to maintain a sharp edge.

Honing steel Contrary to popular belief, a honing steel (or butcher's steel or sharpening steel) does not sharpen knives, but instead straightens the blade, while a sharpener sharpens the blade. A honing steel is a rod made of steel or ceramic, generally about long (although can be longer) and 6 mm to 12 mm (¼ to ½ inch) thick. It is used to hone a knife blade after sharpening in order to restore the edge and improve cutting ability.

A ribbon of ultrathin sections prepared by room-temperature ultramicrotomy, floating on water in the boat of a diamond knife used to cut the sections. The knife blade is the edge at the upper end of the trough of water. An ultramicrotome is a main tool of ultramicrotomy. It allows the preparation of extremely thin sections, with the device functioning in the same manner as a rotational microtome, but with very tight tolerances on the mechanical construction.

A distinguishing characteristic of match safes is that they have a ribbed surface, usually on the bottom, for lighting the matches. Some match safes incorporated a cigar cutter or a small knife blade as well. Often made to be carried in the pocket, some were small enough to be suspended from a fob chain or an Albert chain. Others were made to be left in a handy position in the home, such as the kitchen or close to a fireplace.

Elgin Cutlass Pistol at The Mariners' Museum in Newport News, VirginiaPatterson, C. Meade, "George Elgin's Pistols", The Gun Collector, No. 3, Nov. 1949. In 1838, the United States Navy developed the .54 caliber, single-shot smoothbore Elgin pistol, which was equipped with an 11.5-inch Bowie knife blade and was intended for use by boarding parties; it was the first percussion cap gun in naval service, but only 150 were made. The Navy specifically intended them for the Wilkes-South Seas expedition.

This fish reaches 30 cm (12 in) in standard length. The body of these fish is unusual; it is ventrolaterally flattened and elongated, giving the appearance of a knife blade. The caudal and anal fins are fused and run from beneath the gill opening to the pointed end of the body, creating a uniform, skirt-like fin. This appendage gives the animal superior control in the water, as it is able to propel itself forward and backward with a minimum of wasted energy.

Upon exiting, the material that remains on the center roll moves through the second nip between the center roll and apron roll. This subjects it to an even higher shear force, due to the higher speed of the apron roll and typically, a smaller gap than between the feed and centre rolls. A knife blade then scrapes the processed material off the apron roll and the paste rolls down the apron. This milling cycle can be repeated several times to maximize dispersion.

The window muntins have a beaded knife blade profile and the plaster ceiling cornices and medallions also have finely carved ornamentation. The garden A circular driveway leads up to the house, set back a mere from the street to allow for outbuildings and the property's garden. It includes elements of all three of its periods of private ownership: a formal boxwood rose parterre garden with tall calla lilies, boxwood specimen garden, cutting garden and Woodland Walk surrounding a 19th-century wooden latticework pergola.

The blades that flatten and thin the cast surface are called doctor blades. These come in different shapes such as thick or thin flat cutting surfaces, rounded edges and knife blade-shaped edges. For tapes that are cast thinner than 50 micrometer, the coating is not applied from the top, but from the side (slot- die coater) or bottom (lip coater and micro gravure coater). The surface on which is cast can be made from steel, glass, coated paper and polymers.

Johnson believed the painting showed blood trails, a broken knife blade and the body of a victim, and became convinced that Bassett was the Wanda Beach killer. Johnson also became convinced that it showed a scene from the murders that only the killer would know, as well as clues to the also-unsolved murders of Kruger and Dowlingkoa (see below). Despite the scepticism of other detectives, Johnson wrote a book about the case. Before it could be published, however, he was killed in an accident.

The cemetery of Chamblandes extends over a length of about a hundred meters (yards) and included 76 graves and over 100 skeletons. This Middle Neolithic (4300-3900 BC) graveyard included as grave goods; ocher, various commodities (polished stone ax) and jewelry (wild boar tusks, pendants made of shells, coral and lignite). Two collars, one needle, a dagger and a bronze knife-blade hatchet are attributed to an early Bronze Age grave. In 1992 a cremation grave was discovered that dated from the Late Bronze Age.

Horizontal band knife blades are wider usually 30-60mm wide for foam converting is popular, for leather goods 40-50mm wide blade is popular, 85-110mm width is popular for the tannery splitting band knife. There are other widths depending on the machine manufacturer. The horizontal machine band knife blade is supported by a guide to give dimensional accuracies while cutting/splitting. Therefore, only blades that have passed as one main manufacturing step a surface grinding process reach the necessary thickness tolerances of less than 0,02mm.

Blade cross-sections for typical grinds # Hollow grind — a knife blade ground to create a characteristic concave, beveled cutting edge. This is characteristic of straight razors, used for shaving, and yields a very sharp but weak edge, which requires stropping for maintenance. # Flat grind — The blade tapers all the way from the spine to the edge from both sides. A lot of metal is removed from the blade, so it is thus more difficult to grind, which is one factor that limits its commercial use.

Thompson has a vision of Hatch driving a knife blade into Helton's stomach. The farmer rushes to Helton's defense, striking Hatch with an axe blade and killing him. Ellie comes on the scene only in time to see Hatch lying on the ground and Helton running away (unaccountably, in view of what Thompson "saw"), and she faints. The fleeing Helton, in the midst of an apparent "mad" episode, such as he had never exhibited while with the Thompsons, is killed by the sheriff's men.

The remains of roads, light industry, and/or occupation areas inside the monastery are suggested as well. Two excavated trenches yielded sherds of medieval pottery, corroded iron nail, a possible knife blade, fragments of copper-alloy artifacts, a possible ceramic crucible, and a Neolithic tangled flint arrowhead. They also revealed an outer ditch and compacted layers of organic material, suggesting the presence of a fish pond. Small earthworks to the south and east of the priory are thought to have been turf-built cellular buildings and the remnants of corn-drying kilns.

Hatch 2012, pp. 87–89 Donald L. Fixico, an American Indian historian, says he made a research trip to the National Archives to see the original Treaty of Fort Gibson (also known as the Treaty of Payne's Landing), and that upon close inspection, he observed that it had "a small triangular hole shaped like the point of a knife blade". Five of the most important Seminole chiefs, including Micanopy of the Alachua Seminole, did not agree to removal. In retaliation, the US Indian agent, Wiley Thompson, declared that those chiefs were deposed from their positions.

Ben Keith playing lap steel guitar and pedal steel guitar It is widely reported that the lap steel guitar was invented by a Hawaiian youth named Joseph Kekuku in 1889. It is said that the 17 year-old Kekuku was walking along a railroad track and picked up a metal bolt, slid the metal along the strings of his guitar and was intrigued by the sound. He taught himself to play using this method with the back of a knife blade. Various other people have also been credited with the innovation.

In 1951, Doyle was accepted into the Sadler's Wells Ballet, under the direction of Ninette de Valois, and was promoted to soloist in 1953. During his years with the company, renamed the Royal Ballet in 1956, he created roles in a number of new ballets by Frederick Ashton, Kenneth MacMillan, and John Cranko. MacMillan often cast him in "cruel, overbearing roles because of his height and narrow face, as lethal as a knife blade."Jann Parry, Different Drummer: The Life of Kenneth MacMillan (London: Faber & Faber, 2010), p. 226.

The Chinese employees and the regular workmen made this with steel forged at Beaver Falls, and it was exhibited at the Centennial Exhibition of Philadelphia in 1876. The etched design on the front of the BFCC carving knife blade included a silver-plated shark, a portrait of William Penn, the company name, the Pennsylvania coat of arms in complex detail and a portrait of Governor John F. Hartranft. On the reverse of the blade was scrollwork, and a picture of a mother with children. The carving fork had a patent spring guard which was etched with vines and clusters of grapes.

Example of a bottleneck slide, with fingerpicks and a resonator guitar made of metal A slide, (neck of a bottle, knife blade or round metal or glass bar or cylinder) is used in blues and rock to create a glissando or "Hawaiian" effect. The slide is used to fret notes on the neck, instead of using the fretting hand's fingers. The characteristic use of the slide is to move up to the intended pitch by, as the name implies, sliding up the neck to the desired note. The necks of bottles were often used in blues and country music as improvised slides.

Two concave C-bouts between each side's corners form the waist of this figure, providing clearance for the bow. The best woods, especially for the plates, have been seasoned for many years in large wedges, and the seasoning process continues indefinitely after the violin has been made. Glue joints of the instrument are held with hide glue since other adhesives can be difficult or impossible to reverse when future repairs are in order. Parts attached with hide glue can be separated when needed by using heat and moisture or careful prying with a thin knife blade.

Schematic of double action out the front automatic knife. A double action out the front knife is so-called because the blade emerges from the front of the handle and the thumb stud can be moved forwards or backwards to extend or retract the knife respectively. The knife blade (dark grey) is locked in position by a spring-loaded restraining pin (yellow and red) fitting into a notch in the blade at position 1. The two spring carriers (green) fit into the spaces on the slide (blue) and this assembly rests to the side of the blade.

1910 knife blade engraved after Skinner's method Beaver Falls Cutlery works, Pennsylvania, 1867 Skinner invented a method of etching designs into steel blades and bone handles of knives, which offered a potential for mass production, because it was faster and cheaper than traditional etching techniques. By 1849 he had perfected the invention so that it could be adopted by the industry, "to the productions of which it [was] unquestionably a boon of magnitude. The leading features [were] its simplicity, clearness, and especially cheapness." Prices quoted for decorating one item ranged from one old penny to threepence.

The farm buildings included a corn-drying oven, sunken buildings containing chaff from threshing and fragments of quern-stones. Other finds include a corroded iron knife-blade, copper alloy pins, an iron hobnail, and bones of cattle, sheep, pigs, dogs, cats and other animals. The site was destroyed by the construction of the Appleby Park Hotel; the hotel itself is now to be demolished to make way for the HS2 railway between Birmingham and Sheffield. The farm is thought to have sat adjacent to a Roman Villa; The Old Rectory, also in Appleby Magna, is thought to have been built on these remains.

Since 2009 EKI has been using a stainless steel liner on the non-locking side in order to keep costs down. The most common models are the CQC-7, Commander, SARK, Karambit, Raven, and the SPECWAR. The majority of Emerson's folding knives are equipped with the Wave: a hook on the spine of the blade (originally designed as a blade catcher) which, when snagged on the edge of the pocket or sheath causes the knife blade to open as it is drawn. Emerson called this innovation the Wave and secured a patent for it in March 1999.

It is a suitable discharge option for cakes that are thin and have the tendency to stick with one another. Filter cakes on the drum and discharged roll are pressed against one another to ensure that the thin filter cake is peeled or pulled from the drum. Removal of solids from the discharge roll is done via a knife blade. Roll discharged is used if the desired separation requires high filtration rate, if high solid content slurry is used or if the slurry is easy to filter to produce cake formation or if the discharged solid is sticky or mud-like cake.

According to Trusler, Hogarth was correct in his assumption: To strengthen the connection between himself and the Columbus of the tale he included two eels in a bowl in the centre of the table their bodies demonstrating the "Line of Beauty" as they coiled around a pair of eggs. Trusler sees a further example of Hogarth's serpentine line in the twisted tablecloth and a hint of it in the knife blade. To further underline the ironic nature of the print the composition is based on Da Vinci's The Last Supper, with the bowl containing the eels and eggs replacing the Host.Paulson Hogarth's "Harlot" p.

It is claimed that the pendulum was used as an instrument of torture and execution by the Spanish Inquisition in the 18th century. The allegation is contained in the 1826 book The history of the Inquisition of Spain by the Spanish priest, historian and liberal activist Juan Antonio Llorente. A swinging pendulum whose edge is a knife blade slowly descends toward a bound prisoner until it cuts into his body. This method of torture came to popular consciousness through the 1842 short story "The Pit and the Pendulum" by American author Edgar Allan Poe but there is considerable skepticism that it actually was used.

Kater built a pendulum consisting of a brass rod about 2 meters long, 1½ inches wide and one-eighth inch thick, with a weight (d) on one end. For a low friction pivot he used a pair of short triangular 'knife' blades attached to the rod. In use the pendulum was hung from a bracket on the wall, supported by the edges of the knife blades resting on flat agate plates. The pendulum had two of these knife blade pivots (a), facing one another, about a meter (40 in) apart, so that a swing of the pendulum took approximately one second when hung from each pivot.

These fangs are articulated so that they can extend downward and outward in preparation to bite or can fold back toward the chelicerae as a pocket knife blade folds back into its handle. The chelicerae of a tarantula completely contain the venom glands and the muscles that surround them, and can cause the venom to be forcefully injected into prey. The pedipalpi are two six-segmented appendages connected to the prosoma near the mouth and protruding on either side of both chelicerae. In most species of tarantulas, the pedipalpi contain sharp, jagged plates used to cut and crush food often called the coxae or maxillae.

An OTF knife, showing the sliding blade being extended from the handle A sliding knife is a knife that can be opened by sliding the knife blade out the front of the handle. One method of opening is where the blade exits out the front of the handle point-first and then is locked into place (an example of this is the gravity knife). Another form is an OTF (out-the-front) switchblade, which only requires the push of a button or spring to cause the blade to slide out of the handle and lock into place. To retract the blade back into the handle, a release lever or button, usually the same control as to open, is pressed.

The fine grained species are often indeterminable in this way, and the minute mineral components of all rocks can usually be ascertained only by microscopic examination. But it is easy to see that a sandstone or grit consists of more or less rounded, water- worn sand grains and if it contains dull, weathered particles of feldspar, shining scales of mica or small crystals of calcite these also rarely escape observation. Shales and clay rocks generally are soft, fine grained, often laminated and not infrequently contain minute organisms or fragments of plants. Limestones are easily marked with a knife-blade, effervesce readily with weak cold acid and often contain entire or broken shells or other fossils.

However, the panel that Bosch is most likely remembered for is the far-right panel, depicting hell. This panel contains very detailed imagery; a large knife blade protrudes from between two massive ears of pig dressed in a nun's garments while attempting to kiss a man's cheek, a man's hollow body cavity merges with a tree, and a bird-like creature that appears to swallow humans whole while excreting its human waste into a pit of other fallen humans. Behind all this action, there are crowds of naked bodies that disappear into an ominous red pool and cities that appear to be burning and melting into the dark and misty background. The vision is dark and violent.

The rifle was originally issued with a copper cartridge case and used in the American West during the second half of the 19th century, but the soldiers soon discovered that the copper expanded excessively in the breech upon firing. Another issue was the copper held in leather carriers created a green film that would effectively weld the case into the breech of the carbine when fired. This sometimes jammed the rifle by preventing extraction of the fired cartridge case. A jam required manual extraction with a knife blade or similar tool, and could render the carbine version of the weapon, which had no ramrod to remove stuck cases, useless in combat except as a club.

Despite being portrayed by Ulrich and Lillard, the costume is mostly worn by stuntman Dane Farwell born 1957 and who gave the character many of its mannerisms including the ritualistic cleaning of the knife blade following a kill. In the first film, Craven wore the costume during the opening murder scene where the character is struck by a phone and by Ulrich only once during a finale scene where the character prepares to murder Randy. Despite Stu wearing the costume in the film, actor Lillard never actually wore the outfit. Scream 2 features a slightly redesigned version of the mask from the "Fearsome Faces" line, possessing slightly-altered eyes and an indented chin.

Mulligan does not appear as a character in A Portrait of the Artist as a Young Man, but his acquaintance with Stephen Dedalus has been of some substantial duration by the start of Ulysses. The pair share quarters at the Sandycove Martello Tower, whose twelve-pound yearly rent the chronically impecunious Stephen has somehow contrived to pay. Mulligan's attitude towards Stephen in conversation is both playful and patronising; he alternately teases and compliments Stephen's physical appearance, and refers to him by such epithets as "Kinch" (in evocation of a knife-blade), "Wandering Aengus"Ulysses, p. 214 (a dual reference to the poetry of W.B. Yeats and to Stephen's demeanor whilst drunk), and "dogsbody".

A high resolution image of a modern pattern welded knife blade, showing the dramatic patterning on the side below, and the layering of the steel in the spine above. Acid etching darkens the 1080 plain carbon steel more than it does the 15N20 low alloy nickel steel, producing alternating bands of light and dark on the surface. Pattern welding is the practice in sword and knife making of forming a blade of several metal pieces of differing composition that are forge-welded together and twisted and manipulated to form a pattern. Often mistakenly called Damascus steel, blades forged in this manner often display bands of slightly different patterning along their entire length.

CATRA was originally set up by the British Government in 1952 to carry out developments for the UK's cutlery and knife industries, for which the area of Sheffield in Yorkshire is world-famous. CATRA has developed a range of unique machines for measuring the cutting performance of all types of cutting edges from razor blades to large knives used in machinery and for testing of blade performance in general. Since the 1980s CATRA has become an internationally recognised (60% export, CATRA published accounts 2013) cutting technology organisation, supplying consultancy, testing services and knife/blade making and testing equipment to manufacturers, developers, designers, users and retailers. Their particular expertise is unusual and important to the knife history and culture of Sheffield.

She is very fast and powerful physically, and seems to be resistant to injuries (such as being stabbed with a knife blade). ; :Depicted as an "everyday" male police officer at Nagashima station (having been transferred there due to his poor and perverted behavior). Depicted an ordinary in most ways, with reddish-brown hair and yellow eyes, Haruki is sometimes lazy and tries to avoid doing work when on duty. He is the colleague and mentor of Kiruko, being with her most of the time while carrying out their duties and policemen, and as a result, is responsible for her mistakes and accidents (a running gag being that he gets punished whenever Kiruko screws up, often in form of getting his pay deducted).

A scalpel with synthetic diamond blade Close-up photograph of an angle grinder blade with tiny diamonds shown embedded in the metal A diamond knife blade used for cutting ultrathin sections (typically 70 to 350 nm) for transmission electron microscopy. Industrial diamonds are valued mostly for their hardness and thermal conductivity, making many of the gemological characteristics of diamonds, such as the 4 Cs, irrelevant for most applications. 80% of mined diamonds (equal to about annually) are unsuitable for use as gemstones and are used industrially. In addition to mined diamonds, synthetic diamonds found industrial applications almost immediately after their invention in the 1950s; another of synthetic diamond is produced annually for industrial use (in 2004; in 2014 it is , 90% of which is produced in China).

A boot and shoe clicker is the person who cuts the uppers for boots or shoes from a skin of leather or piece of man-made material (usually from a bulk roll). This includes all components of the upper, including linings, facings, stiffeners, reinforcements for eyelets and zip-protectors. The job was historically named prior to mechanisation, due to the sound of the operator's hand-knife blade rattling against the brass edge-binding (including the joints in the binding) used to protect the board patterns which were overlaid on to the skin. In larger factories there would be many hand-clickers in close proximity to one another, hence there would be many clicks per second, so the informal description became known as clicking by clickers.

The NRS-2 (Нож Разведчика Стреляющий, "Scout Firing Knife") (official GRAU index 6P25U) is a gun hybrid with a combination of a knife blade and a built- in single-shot shooting mechanism designed to fire a 7.62×42mm SP-4 (СП-4) cartridge. The SP-4 is the same cartridge designed for the PSS silent pistol. It was manufactured by the Tula Arms Plant for Soviet Spetsnaz troops in the 1980s, and is still used as a personal weapon for modern Spetsnaz troops and special law enforcement groups. The NRS-2 is designed for the blade to either be stabbed or thrown at the enemy, or fire at the enemy using the inbuilt shooting mechanism at distances up to 25 metres.

While he was working at his first post-high school job as a graphic artist and printing press operator at RC Graphics in Caldwell, New Jersey, Skates met the Misfits founder/bassist Jerry Only while he was delivering printed materials to Pro Edge the knife blade factory owned by Only's father where Only also worked. Roth, Keith/ Kristi, Aimee. WRAT Electric Ballroom (03-16-08) Only booked a recording session to have Skates play drums on a Misfits recording, but Skates could not use his mother's car to make it to the session. He worked as a stock boy in the Summit Food Market to re-pay his mother who loaned him money to purchase a Ludwig double bass drum kit that he re-fitted with Tama heads.

There is evidence of further activity within the village during the Roman period, including evidence of a villa or farm and a temple, although it is unclear whether there was a formal village-like settlement during this period. A Romano-British farm dating from the 4th century was discovered during construction of a hotel in Appleby Fields, next to Junction 11 of the M42. Artifacts included coins from the reigns of Constantine I(307-337) and Magnentius (350-353); pottery fragments dating from the late 4th century; and evidence of corn drying ovens and three farm buildings. Roof tiles, a corroded knife blade, copper pins, an iron hobnail, and fragments of quern stones were also found, as well as animal bones indicating that cattle, sheep, pigs, cats and dogs were kept on the farm.

However, there are also rays that did interact with the acoustic field in the following manner: If a ray travels through a region of nonuniform density whose spatial gradient has a component orthogonal to the ray, that ray is deflected from its original orientation, as if it were passing through a prism. This ray is no longer parallel, so it doesn't intersect the focal point of the focusing element and is not blocked by the knife. In some circumstances the deflected ray escapes the knife-blade and reaches the camera to create a point-like image on the camera-sensor, with a position and intensity related to the inhomogeneity experienced by the ray. An image is formed in this way, exclusively by rays that interacted with the acoustic field, providing a mapping of the acoustic field.

The Le Prieur rocket was essentially a cardboard tube filled with 200 grams of black powder with a wooden conical head attached (by doped paper or linen tape) and had a triangular knife blade inserted in a slot across its apex forming a spear point. A square-section wooden stick (usually pine) was taped to the fish with about extending back from the base of the rocket and fitted snugly into a launch tube attached to the aircraft inter- plane struts. As top French military officers had expressed concerns about fire hazard for the attacking aircraft, Yves Le Prieur first experimented with his weapon by fitting one on a short section of a Voisin aircraft wing bolted on a Piccard Pictet (Pic-Pic) automobile (one of the few period cars with a genuine capability). As the tests went on with full success, the weapon was soon put into active service.

During the early 1830s English gunsmith Joseph Manton offered a variant with a retractable knife blade, and pistols with up to 18 barrels. The Robbins & Lawrence pepperboxes of 1851–1854 had rifled barrels, a break action breechloading mechanism and an early safety catch, meaning that it was not necessary to disassemble the gun to reload it. The flaw with the pepperbox is that it becomes more front heavy if the length and number of barrels is increased, making accurate aiming difficult. With most types in particular those with rotating barrel clusters, it is almost impossible to aim beyond close range because the hammer is in the line of sight (some pepperboxes have a slot in the hammer through which one is supposed to aim), there is no place to put a frontsight (putting one for each barrel would only increase the weight of the front end and likely make drawing the weapon awkward), and the gun is too front heavy to permit quick and steady aiming.

The collaboration piece is a fixed-blade knife designed primarily for knife throwing dubbed the BETT: Branton-Emerson Tactical Thrower. "CQC-6 is the most collectible knife in the world" -Emerson Emerson Commander One of Emerson's earliest production models, the Commander (winner of Blade Magazines Overall Knife of the Year Award for 1999), is a large recurve folding knife based on a special custom design, the ES1-M, that he had made for a West Coast Navy SEAL Team. The Commander has a hook on the spine of the blade (originally designed as a blade catcher) which, when snagged on the edge of the pocket or sheath, causes the knife blade to open as it is drawn. Due to its visual aesthetic, Emerson called this innovation the "Wave"and secured a patent for it in 1998. Since another knife and tool company, Leatherman, had trademarked the name "Wave," in March 1999 Emerson changed its name to the "wave-shaped opening feature".

Reflecting the savagery of hand-to-hand trench warfare, the Mark I's pommel incorporated a so-called 'skull-crusher' cap extension, ostensibly designed to stun or kill an enemy soldier and to provide a secondary weapon in circumstances where the blade was damaged or broken. A special proprietary metal scabbard was issued with the Mark I, capable of accommodating the new knife and its oversized knuckleduster grip handle. In 1918, Captain Rupert Hughes of the U.S. Army submitted a patent application for a specialized automatic-opening trench knife of his own design, the Hughes Trench Knife.Hughes, Rupert, Letters Patent No. 1,315,503 issued September 9, 1919, Washington, D.C.: United States Patent Office This was a curious device consisting of a folding spring-loaded knife blade attached to a handle which fastened to the back of the hand and was secured by a leather strap, leaving the palm and fingers free for grasping other objects.