He grabbed a folding ladder and tossed it out a window, helping his colleagues escape to safety, he told KNBC-TV.
|
|
You should also consider the Louisville Ladder FS1508 Fiberglass Ladder, the Rubbermaid RM-3W Folding 3-Step Stepladder, the Ohuhu EN131 Telescopic Extension Ladder, and the Lifewit Multipurpose Aluminum Folding Ladder.
|
|
In addition, we're advised to keep firearms in the room, as well as a flashlight, a telephone, a folding ladder, and an extra set of house keys tied to a glow stick, in case we need to let the cops in.
|
|
A folding ladder built into the left fuselage provides access to the cockpit as well as to the top of the aircraft.
|
|
A rubber pad affixed to the buttstock absorbs some recoil. The front sight is a fixed blade. The rear sight on the M79 is a folding ladder–style leaf sight. When folded, the leaf sight acts as a fixed sight at close range.
|
|
A keel / centreboard combination is an option. The displacement–length ratio (D/L) ranges from 206 to 231, depending on model. The opening transom of the + and XL model is simple to operate and transforms to a walk through transom / swim platform including an integral folding ladder providing easy access to the water. The R version has an open transom.
|
|
There is a folding ladder and a sink in each compartment. At each end of the carriage is a toilet operated with a vacuum sewer system, identical to those install on B7 and Class 92 trains. a carriage features a water tank and a sewer tank. These, along with the pressure vessel and other accessible equipment, is located on the underside of the carriage.
|
|
The Hunter 430 is a recreational keelboat, built predominantly of fiberglass. It has a fractional sloop B&R; rig, a raked stem, a walk-through reverse transom with a swimming platform and a folding ladder, an internally mounted spade- type rudder controlled by a wheel and a fixed wing keel. It displaces and carries of ballast. The boat has a draft of with the standard wing keel fitted.
|
|
The Hunter 460 is a recreational keelboat, built predominantly of fiberglass. It has a B&R; masthead sloop rig, a raked stem, a walk-through reverse transom with a swimming platform and folding ladder, an internally mounted spade-type rudder controlled by a wheel and a fixed fin keel or optional bulb wing keel. With the fin keel it displaces and carries of ballast. With the wing keel it displaces and carries of ballast.
|
|
The upper bunk can be collapsed into the wall, allowing the room to be converted to a single. In this configuration the lower bunk can also be used as a sofa, with the walls being upholstered. Initially children could sleep on a balcony room. On the reverse wall of the beds are three niches, two which can be used as a wardrobe and one which features a folding ladder to the upper bunk.
|
|
The Hunter 456 is a recreational keelboat, built predominantly of fiberglass. It has a masthead sloop B&R; rig, a raked stem, a walk-through reverse transom with a swimming platform and folding ladder, a center cockpit, an internally mounted spade-type rudder controlled by a wheel and a fixed fin keel or optional wing keel. With the fin keel it displaces and carries of lead ballast. With the wing keel it displaces and carries of lead ballast.
|
|
The Hunter 49 is a recreational keelboat, built predominantly of fiberglass, with wood trim. The hull has a solid fiberglass laminate bottom, with balsa-cored sides. It has a fractional sloop B&R; rig rig, a stainless steel arch-mounted mainsheet traveler, a raked stem, a walk-through reverse transom with a swimming platform and folding ladder, an internally mounted spade-type rudder controlled by dual wheels and a fixed wing keel. A deep draft fin keel was optional.
|
|
The Hunter 54 is a recreational keelboat, built predominantly of fiberglass, with wood trim. The hull was designed by Warren Luhrs and John Cherubini, while Cortland Steck designed the rig. It has a cutter rig, a raked stem, a walk-through reverse transom with a swimming platform, folding ladder and dinghy stowage in a watertight compartment, an internally mounted spade-type rudder controlled by a wheel and a fixed fin keel. It displaces and carries of ballast.
|
|
The Marlow-Hunter 50 is a recreational keelboat, built predominantly of fiberglass. It has a B&R; rig masthead sloop rig, a raked stem, an aft cockpit, a walk-through reverse transom with a swimming platform and folding ladder, an internally mounted spade-type rudder controlled by dual wheels and a fixed fin keel or wing keel. The fin keel version it displaces and carries of ballast, while the wing keel version displaces and carries of ballast. The boat has a draft of with the standard keel and with the optional shoal draft wing keel.
|
|
The Hunter HC 50 is a recreational keelboat, built predominantly of vacuum-bagged fiberglass, with a foam-core deck. It has a cutter rig, a raked stem, a walk-through open reverse transom with a swimming platform and folding ladder, an internally mounted spade-type rudder controlled by a tiller and a fixed fin keel. It displaces and carries of lead ballast in the keel and also of flooding water ballast in each of two lateral tanks, filled with electric pumps. The design has stand-up headroom below decks.
|
|
The Hunter Passage 450 is a recreational keelboat, built predominantly of hand-laid polyester and vinylester resin fiberglass, with a deck made from a fiberglass and marine plywood sandwich and Baltek end- grain balsa core hull above the waterline. It has a masthead sloop B&R; rig, a raked stem, a walk-through reverse transom with a swimming platform and folding ladder, an oval-shaped center cockpit, a fiberglass mainsheet arch, an internally mounted spade-type rudder controlled by a wheel. It displaces and carries of lead ballast. The boat has a draft of with the standard wing keel with a weighted bulb.
|
|
The Meillerwagen carried a number of accessories on the chassis and lifting frame, both for itself and the rocket. A toolbox fixed on the chassis carried snow chains, a tyre pump, and assorted tools for the Meillerwagen and KdF motor. The chassis was equipped with a pair of blast shields, entrenching tools, a hand-steering A-frame, two jacks, a spare tyre and a folding ladder. Special trays were fixed on the chassis to carry the transport cases which held various rocket accessories such as the graphite steering vanes, the nose fuse, and the Z-stoff (permanganate) flask.
|
|
The Marlow- Hunter 50 Center Cockpit is a recreational keelboat, built predominantly of fiberglass. It has a B&R; rig fractional sloop rig, a raked stem, a center cockpit, a walk-through reverse transom with a swimming platform and folding ladder, an internally mounted spade-type rudder controlled by a wheel and a fixed fin keel or wing keel. The fin keel version it displaces and carries of ballast, while the wing keel version displaces and carries of ballast. The boat has a draft of with the standard keel and with the optional shoal draft wing keel.
|
|
He became a student of the instrument-maker Jean de Fusoris, who was employed between 1400 and 1445 by Philip the Good and later by the French king Louis XI of France. By 1432, Henri was at the court of Philip the Good in Dijon as well. Between 1438 and 1446 (several decades before the activities of Leonardo da Vinci), he created manuscripts in Latin on a wide variety of technical subjects, including astronomy, hydraulics, astronomical instruments, and drawings of apparent inventions like a folding ladder and a gem polishing machine. Among the manuscripts is a copy (in Henri's handwriting) of Jacob of Liège's Speculum musicae.
|
|
The Hunter 466 is a recreational keelboat, built predominantly of fiberglass, with wood trim. It has a B&R; masthead sloop rig, a raked stem, a walk-through reverse transom with a swimming platform and folding ladder, an internally mounted spade-type rudder controlled by a wheel and a fixed fin keel or optional wing keel. the fin keel model displaces and carries of ballast, while the wing keel model displaces and carries of ballast The boat has a draft of with the standard keel and with the optional shoal draft wing keel. The boat is fitted with a Japanese Yanmar diesel engine of .
|
|
The Marlow-Hunter 31 is a recreational keelboat, built predominantly of fiberglass. The hull and deck and made from a vinyl ester resin with continuous reinforcement fibers, reinforced with Nida honeycomb cores and Kevlar in the forward hull for collision protection. It has a fractional sloop B&R; rig, a mainsheet traveler mounted on a stainless steel arch, a nearly plumb stem, a reverse transom with a fold-down swimming platform and folding ladder, an internally mounted spade-type rudder controlled by a laterally-tilting wheel and a fixed fin keel or shoal draft keel. With standard fin keel it displaces and carries of ballast, while the shoal draft model displaces and carries of ballast.
|
|
The Marlow-Hunter 42SS is a recreational keelboat, built predominantly of fiberglass with Kevlar reinforcing in the forward hull and polypropylene honeycomb Nida-cores. It has a fractional sloop B&R; rig, a stainless steel arch that mounts the mainsheet traveler, a nearly plumb stem, a reverse transom with a fold-down swimming platform and folding ladder, an internally mounted spade-type rudder controlled by a laterally tilting, folding wheel and a fixed deep fin keel or shoal draft keel. The deep draft fin keel version displaces and carries of ballast, while the shoal draft keel version displaces and carries of ballast. The boat has a draft of with the standard keel and with the optional shoal draft keel.
|
|
The K12 is somewhat heavy for the gun class at , mainly because it has pistol grip, spade grip, and metal sliding stock all in one gun for the purpose of being quickly converted into a ground-fire machine gun by a dismounted operator; the spade grip can be removed by taking out two pins, removing the grip, and unfolding the stock which is similar in design to the FN Minimi's Para version. Standard machine gun features are included like a folding (K3-style) bipod, quick change barrel, gas regulator, and (M240H-style) flash suppressor. It also has a folding ring sight for firing on helicopters with a folding ladder type sight for more accurate aiming. The sight is attached on a MIL-STD 1913 rail, which is also on the feed cover and both sides of the handguard.
|
|
After that, the three young people were just waiting for the right moment to leave East Germany, and planned to flee together on the night of 22 November 1980. In preparation for their escape, Peter Wiesner created a folding ladder in his apartment, which consisted of separate pieces. Numerous newspaper and magazine articles indicated that by this time, Marienetta Jirkowsky was three months pregnant.taz.de article: Buddeln in der Vergangenheit, June 28, 2007 Altpreussenblatt article "Protest gegen Mord an der Mauer", 14 March 1981 (page 1)Berliner Morgenpost article: "Auf den Spuren eines toten Mädchens", June 27, 2007 New York Times article: "On Berlin Wall Anniversary, Somber Notes Amid Revelry", November 9, 2014 However, this has not been confirmed by something more reliable, such as an autopsy record from the hospital in Hennigsdorf, or a police report.
|
|
The grenade launcher does not have an extractor; instead notches were cut into the base of the barrel that enable the operator to remove spent shell casings manually. The HK69A1 has a single action firing mechanism with an exposed hammer that is cocked manually with the thumb after loading a round. A manual safety secures against accidental firing; the safety is ambidextrous and provides a lever on each side of the frame, above the trigger (the lever in the "S" position – indicates the weapon is safe; "F" – ready to fire). The grenade launcher is aimed using iron sights that consist of a front post (adjustable for elevation) and a rear sight that has a flip-up dual aperture for short-range engagements (50 and 100 m settings) and a folding ladder-type leaf sight for long distance firing (has notched steps for 150, 200, 250 and 350 m), that is folded down and over the barrel when stowed.
|
|
82A aperture sight All Model 52s with iron sights > were equipped with receiver-mounted aperture sights, never barrel mounts, > tang mounts or open sights. Because at the time the Model 52 was developed > many Army- and National Rifle Association-sponsored matches were restricted > to "military-style" sights, and because Winchester had hopes of selling the > 52 to the War Department as a marksmanship training rifle, Burton and > Laudensack designed a folding ladder sight for the new target rifle. > Designated 82A, it bore some resemblance to the sight on the M1903 > Springfield, especially in its pivoting-base windage adjustment (albeit > controlled by dual-opposed thumbscrews rather than the Springfield rack-and- > worm). However, elevation adjustment was governed by a micrometer click- > wheel for precision, not free-sliding like genuine military sights. The > Burton-Laudensack helped Model 52 shooters sweep matches and set records > throughout the 1920s, but more precise aftermarket sights took over the > field and the increasingly obsolescent 82A was not offered after World War > II. Lyman 48 aperture sight Winchester catalogs from the beginning listed > 52s with sights by other makers; indeed, the buyer could specify any > compatible peep on a special-order basis.
|
|