Construction of the tower started in 2009 and completed in 2017. On the evening of 20 February 2020, a fire broke out on the upper parts of the building's claddings. In response, the residents were evacuated and sheltered to the nearby buildings. The National reported that the claddings were similar to that of Grenfell Tower fire.
|
|
Clay panels are used for the dry construction of wall and ceiling claddings and facing shells. The boards are mounted on a steel profile or wooden frame construction by means of screws or nails. For ceiling claddings, washers must be used depending on the type of clay panel. The panels can be sawn with standard tools, like a cutter knife, a jigsaw or a circular saw.
|
|
Loire-Atlantique. This and Duisburg plants pilder mills the Trex as a fuel rod (claddings and guide tubes). Paimboeuf plant also makes zirconium bars for end caps.
|
|
A wide section of the western facade steps back towards the interior of the structure, separating the chamferboard and slab claddings. This stepped section is clad in wide, vertical timber boards.
|
|
The face lift revised the hood and grille, and enlarged the tail lights. The station wagon featured optional wood panel body claddings. Engines were 1.6, 1.8 and 2.0-litre SOHC units. In North America, the 20R 2.2-litre engine was used.
|
|
In 2004 Sortimo introduced the third generation of in-vehicle equipment, "Sortimo Globelyst". The current Globelyst range includes more than 1400 components, approximately 600 floor inserts and wall claddings. With the introduction of the T-Boxx in 2007, Sortimo offers an alternative to the classic small components case also known as "KM 321".
|
|
Weiwang M35 The Weiwang M35 is the crossover variant of the regular Weiwang M20 featuring a redesigned front bumper with restyled grilles and front and rear lamps that also varies from the Weiwang M30. The Weiwang M35 also features plastic claddings on the side skirts and a slightly higher ground clearance for the crossover-inspired styling.
|
|
Sortimo Speedwave, a subsidiary of the Sortimo Grundstücks- und Beteiligungs-GmbH was founded in 2000. Sortimo Speedwave is a certified (VDA 6.1 and ISO 9001) development partner and system supplier. Its core competences are with multifunctional interior vehicle products, cargo management, loading room systems and sidewall claddings. Speedwave designs and develops individual and complete solutions throughout a closed processing chain.
|
|
In fiber optics, a quadruply clad fiber is a single-mode optical fiber that has four claddings. Each cladding has a refractive index lower than that of the core. With respect to one another, their relative refractive indices are, in order of distance from the core: lowest, highest, lower, higher. A quadruply clad fiber has the advantage of very low macrobending losses.
|
|
Borealis supplies polyolefin plastic materials for engineering applications in the automotive industry. Plastic materials replace conventional materials such as metal, rubber and engineering polymers. In automotive vehicles, Borealis’ polyolefin plastic materials are used in a wide range of exterior, interior, and under-the-bonnet applications, including bumpers, body panels, trims, dashboards, door claddings, climate control and cooling systems, air intake manifolds and battery cases.
|
|
Foton Gratour ix7 The Foton Gratour ix7 (伽途ix7) is essentially the Gratour ix5 with more ground clearance, extra plastic claddings and positioned higher in the market. Prices of the Gratour ix7 ranges from 53,900 yuan to 69,900 yuan. The Foton Gratour ix7 was powered by the 1.5 liter inline-4 engine producing 116 hp from the Gratour ix5 mated to a 5-speed manual gear box.
|
|
Gratour im8 The Foton Gratour im8 (伽途im8) is essentially the im6 with more ground clearance, extra plastic claddings and positioned higher in the market. Prices of the Gratour im8 ranges from 70,900 yuan to 79,900 yuan. A higher trim level called the Foton Gratour GT was also based on the Gratour im8 featuring a duo-colored paint job, and a price range from 79,900 yuan to 136,800 yuan.
|
|
The main hall was designed with Italian limestone claddings with ornate plaster ceilings and cornices. Floor-length windows, cornices, panels, friezes, and details reflecting a range of styles are found throughout the interior. Rooms drew from various period styles including Georgian, Adamesque, Jacobean, and even Arts and Crafts. The house was fully electrified, and had a central vacuum system, recirculating hot water, and a ten port shower in the master bathroom.
|
|
A cross version called the FAW Weizhi V2 Cross was launched in November 2011 featuring plastic claddings, rood rails and increased ground clearance. Price of the Weizhi V2 Cross starts at 43,900 yuan with the five- speed manual gearbox version and ends at 49,900 yuan for the 5-speed automatic gearbox version. Power of the Weizhi V2 Cross comes from a 1.3 liter engine producing 91hp and 120nm.
|
|
The system utilised prefabricated light gauge steel frames which could be built economically up to a maximum of 4 storeys. The frames were finished in a variety of claddings and their modular nature could be employed to produce architecturally satisfying buildings. Initially developed solely for schools, the system was also used to provide offices and housing. A later development was known as SCOLA (Second Consortium of Local Authorities) and MACE (Metropolitan Architectural Consortium for Education).
|
|
'We of the Never-Never Chapter 13 ;Linings, plasters and claddings Whether or not a slab hut was lined, inside or out, depended on the economic means, the energy and skill, and the taste of the occupants. Beyond the need for simple weatherproofing lay the desire for some aesthetic satisfaction, the wish to make one's dwelling place pleasing in appearance as well as comfortable to occupy.Cox, 1969. p 48Holland, G. "The Comfortable House" in Troy, p.
|
|
In comparison to the front, the rear verandah is crudely constructed and has been infilled with a variety of claddings such as corrugated iron, lattice and fibreglass sheeting. The floor of the back verandah is brick paved. The building's original core is square and comprises two bedrooms on the north side, with a combined former parlour and drawing room on the other side. Two later built rooms at the rear provide accommodation for a kitchen and an extra bedroom.
|
|
Here, finds from the Protobyzantin period (4th to 7th century) are exhibited. After the founding of the Byzantine Empire by Constantine the Great (330 AD) Christianity soon became a state religion. Since 1997 artifacts of the early Christian Church and architectural finds have been shown in connection with the church buildings of the time, while wealthy churches were endowed with marble or mosaic floors and marble wall claddings, poorer churches were laid out with mosaic floors and frescoed walls.
|
|
In neo-eclectic architecture the revival elements are almost always decorative, consisting of surface elements such as claddings and windows. The basic construction of neo-eclectic houses is unchanged from previous house styles such as the ranch-style house. An important development leading to the modern neo-eclectic style is the popularity of EIFS, a form of external insulation that is easy to apply and can be coloured and shaped to appear like an array of different materials such as stucco and stone.
|
|
Chinon A1 used vertical fuel channels, as did the British Magnox reactors, and a steel pressure-vessel. The fuel cladding material was magnesium-zirconium alloy in the UNGG, as opposed to magnesium-aluminium in Magnox. As both claddings react with water, they can be stored in a spent fuel pool for short times only, making short-term reprocessing of the fuel essential, and requiring heavily shielded facilities for this. The programme was a succession of units, with changes to the design increasing power output.
|
|
Karry K60 rear The Karry K60 is available in 5, 6, and 7 seater versions. The Karry K60 was launched on the China car market in the third quarter of 2016 with prices starting from 58,800 yuan to 81,800 yuan. Despite the K60 being labeled as an SUV, the Karry K60 compact crossover is essentially a lifted MPV with plastic claddings built on a commercial minivan chassis sharing the underpinnings of the Cowin V3 MPV as Karry has always been Chery's commercial vehicle division.
|
|
The sizing and placement of window and door openings satisfied the expectation of standardisation and simplification that had become an orthodoxy during the war years, and was also well suited to systemised building. Internal linings are very robust, consisting of a leaf of clinkerblock work, plastered on the inner face, whilst intermediate floors are of concrete on metal lath reinforcement. As a result, the houses give the impression of being extremely solidly built. The steel frame was designed to accept a number of different claddings, from conventional brickwork to render on a metal lath.
|
|
The decoration is cultural and designed as an antechamber to the Louvre. Developed in partnership with the latter, it showcases reproductions of statues from Antiquity or the Middle Ages, displayed directly on the platforms. Porcelain stoneware wall claddings cover the walls, devoid of advertising, while the floor and tunnel exits are tiled in anthracite gray, the crypt painted white. The backs of the display cases, the alcoves and the pedestals are covered with a dark material to simulate a case, and the ceiling is painted entirely in black.
|
|
Tapered double-clad fiber (T-DCF) is a fiber whose outer and inner claddings and core diameters vary smoothly with length. The core at narrow side of T-DCF supports propagation of the fundamental mode only, whereas at the wide side the core is able to guide many modes. However, it was shown experimentally that light launched into the narrow end of a T-DCF propagates into the wide core without any changes of mode content. As a result, at the wide (substantially multimode) end of T-DCF light propagates only in the lowest-order mode with excellent beam quality.
|
|
A major design aesthetic of the 1980s and 1990s was Post Modernism, which featured building styles and forms reminiscent of the Mediterranean and southern California. This design approach was heavily marketed and became a fashionable design motif. Common building elements of this time included roof parapet with no overhangs or eaves, stucco wall cladding, open walkways, arched windows, complex cladding joints, all of which provided more opportunities for penetration of water and studies confirmed were key contributors to water infiltration.The Vancouver Experience, Don Hazledon, ORNL Building Envelope Research Council, in Claddings Institute of New Zealand online publication.
|
|
A further exacerbating factor that resulted in more significant damage from the leaks, was the change to the New Zealand Standard for Timber Treatment in 1995, allowing the use of untreated Pinus radiata timber for wall framing. As this timber has little natural resistance to rot when wet, damage occurs more quickly. In many cases claddings were not used within their specifications or not installed correctly. Many buildings built in the "Mediterranean" style used these types of cladding and had features such as recessed windows, flat roofs, minimal eaves, multiple storeys, complex roofs, solid balustrades, balconies and penetrations of the exterior cladding that increased the likelihood of water infiltrating the structure.
|
|
Away fans may enter from the northeast corner of the stadium via Worcester Avenue and the north podium. The South Stand features a 5-storey atrium behind a single 7,000 m2 curved glazed facade. Frontage of the stadium and Tottenham Experience along the High Road The bulk of the structure dominates the surrounding area, but the appearance of the mass of the building is modulated by different claddings of glass, metal panels and pre-cast concrete. The perforated metal panels serve as a screen but allow for natural ventilation and light for the open plant areas in the stadium, and they also act as a unifying sculptured element in the appearance of the stadium.
|
|
Retrieved 2013-12-04 In 1997 the Architectural Institute of British Columbia (AIBC) launched its own specialty course Building Envelope Education Program for its members.The Vancouver Experience, Don Hazledon, ORNL Building Envelope Research Council, in Claddings Institute of New Zealand online publication. Retrieved 2013-12-04 In 1999 a joint committee of the professional governing bodies for architects and engineers in the province (the AIBC and the Association of Professional Engineers and Geoscientists of British Columbia) developed a formal designation: the Building Envelope Professional (BEP). A joint accreditation process and procedures manual for BEPs was created and the municipalities' lists of BES were discarded as they transferred recognition to the BEP list.
|
|
A major one was the increase in the use of cladding systems such as fibre cement sheet (generic name Fibrolite in New Zealand) and EIPS (Externally Insulated Plaster System) that relied on a paint finish as the primary defence against water ingress. This system is very similar to Exterior insulation finishing system (or EIFS). Such cladding systems typically allowed for little construction or thermal movement so that fine cracks that appeared insignificant, and would have been relatively insignificant in traditional claddings such as weatherboard, allowed continuous ingress of moisture into the framing. These causes, combined with the reduced air movement through the prevalence of sheet cladding or sheet insulating materials for the monolithic look cladding, resulted in very damp conditions which are ideal for rot.
|
|
Overseas studies of similar short-rotation produced juvenile sapwood had concluded it was so different from "normal" wood that it would be wise to treat it as though it were a completely different species. New methodologies to utilize the wood would have to be developed. Arguably the greatest issue was its significant longitudinal shrinkage and expansion (some seven times, on average, greater than any wood previously used in modern construction) and since shown to be sufficient to buckle structural members and associated cladding and roofing materials. Such movement was, and continues to be, of particular significance for rigid exterior claddings which during the Leaky Building crisis were found to have been suffering cracking, and the entry of water through capillary action, at an unprecedented rate.
|
|
Victor Koh Dut Sye, a local shopkeeper running a business near the power station, recalls its beautiful red-brick structure that stood so grand, especially during those days when the power station was first commissioned, when anything in red helps give one a sense of high class and prestige. The architecture signified the great significance of St James Power Station as brick outer- claddings were only used for grand and prestigious buildings. The building is the only historical industrial building in Singapore with triple-level arch- shaped windows, which enabled much natural light to penetrate in and provide generous lighting in the interior of the power station. It also has voluminous space in the inside which was initially designed to house the large electricity generators and power equipment.
|
|
Particularly in the former Soviet Union and other Eastern European countries, but to an increasing extent elsewhere, the stations were built with splendid decorations such as marble walls, polished granite floors and mosaics—thus exposing the public to art in their everyday life, outside galleries and museums. The systems in Moscow, St. Petersburg, Tashkent and Kyiv are widely regarded as some of the most beautiful in the world. Several other cities such as Stockholm, Montreal, Lisbon, Naples and Los Angeles have also focused on art, which may range from decorative wall claddings, to large, flamboyant artistic schemes integrated with station architecture, to displays of ancient artifacts recovered during station construction. It may be possible to profit by attracting more passengers by spending relatively small amounts on grand architecture, art, cleanliness, accessibility, lighting and a feeling of safety.
|
|
Writing as the Office for Soft Architecture, Robertson pursued what she calls lyrical research into the new, dynamic forms of cities, especially her home (then) of Vancouver, B.C., Canada.Robertson, Lisa: Occasional Work and Seven Walks from the Office for Soft Architecture Clear Cut Press, 2003 Robertson's evocations of "this permanent transience, the buildings or shelters like tents—tents of steel, chipboard, stucco, glass, cement, paper, and various claddings—tents rising and falling in the glittering rhythm which is null rhythm, which is the flux of modern careers..." helped Stadler understand how writing can transform degraded landscapes into sites of meaning and beauty.Stadler, Matthew: lisa robertson and hadley + maxwell , Back Room, 2007 This insight was confirmed and persuasively theorized by German urban planner Thomas Sieverts in his book, Zwischenstadt, which came into English in 1997 as Cities Without Cities. Stadler's encounter with Sieverts's work in 2003, catalyzed the analysis of cities and sprawl that he ultimately published in the annotated reader, Where We Live Now.
|
|
India is also pressing ahead with a large nuclear program, as is South Korea. Indian Vice President M Hamid Ansari said in 2012 that "nuclear energy is the only option" for expanding India's energy supplies, and Prime Minister Modi announced in 2014 that India intended to build 10 more nuclear reactors in a collaboration with Russia. In the wake of the disaster, the Senate Appropriations Committee requested the United States Department of Energy “to give priority to developing enhanced fuels and cladding for light water reactors to improve safety in the event of accidents in the reactor or spent fuel pools”. This brief has led to ongoing research and development of Accident Tolerant Fuels, which are specifically designed to withstand the loss of cooling for an extended period, increase time to failure, and increase fuel efficiency.. This is accomplished by incorporating specially designed additives to standard fuel pellets and replacing or altering the fuel cladding in order to reduce corrosion, decrease wear, and reduce hydrogen generation during accident conditions.. While research is still ongoing, on 4 March 2018, the Edwin I. Hatch Nuclear Power Plant near Baxley, Georgia has implemented “IronClad” and “ARMOR” (Fe-Cr-Al and coated Zr claddings, respectively) for testing.
|
|