Sentences Generator
And
Your saved sentences

No sentences have been saved yet

429 Sentences With "beveled"

How to use beveled in a sentence? Find typical usage patterns (collocations)/phrases/context for "beveled" and check conjugation/comparative form for "beveled". Mastering all the usages of "beveled" from sentence examples published by news publications.

It's beveled on all four corners and then has a beveled bezel into which is set a sapphire crystal.
Allen + Roth Reclaimed Wood Beveled Wall Mirror Buy it!
The front door is carved wood with beveled crystal inlays.
Lerner paints in oil on wood panels, whose edges are beveled.
However, an existential gloom seemed to drip from its beveled ceilings.
Edges are cut and beveled, sometimes for views, sometimes for interior stairways.
"We just beveled the edges," he noted, to create integrated finger pulls.
That's mostly thanks to the use of a beveled flat iron, Ess explains.
Its ideas are more finely beveled than its people, never a good sign.
Even its buttons, with their woven reliefs and double-beveled edges, were beautiful.
A closer look, however, reveals the same beveled design that defines previous generations of Airs.
The room, at least, was tasteful with dark wood trim, beveled mirrors and a beige carpet.
Mr. Issac used X-acto and beveled knives to create convincing metallic angles in the foam.
They now have a stylish-looking beveled design that's quite different from other laptops in this class.
Each case is made of rubber, is 2mm thick, and has a beveled lip to add protection.
Last June, a large-scale beveled-edge work called "forth" sold for $1.16 million at Sotheby's London.
In spite of retaining the iconic beveled design, it's also a bit thicker than the 12-inch model.
Still, its dual-material construction absorbs shock and uses a raised beveled edge to keeps your touchscreen safe.
The glass should not be hued, beveled or decorated in any way that may interfere with its clarity.
The heel is also beveled slightly at the sole, so it "looks as fast as it feels," Nuelle says.
Whitmore's "filter" was a 4-foot-tall piece of beveled glass she found at a shop in Los Angeles.
His fingers clicked in a blur as he placed angled steps, upside-­down, to mimic the Arc's beveled top.
Many of the edges are beveled, echoing the forty-five degree angle at which many of them are set.
The new x360 has the same sharp-to-touch and sharp-to-look-at beveled sides as the last few iterations.
It's not the thinnest phone, but the curves and thick beveled chamfer that runs around the backside give it a svelte appearance.
But even the beveled metal hinge and the four little stoppers on the bottom of the laptop look identical to the MacBook's.
She would pick out the discards of mat boards, cut out to create windows, and, with permission, take the beautifully beveled pieces.
It's one thing to obsess over the aesthetics of your flat-screen TV — the beveled corners, the screen size, the color temperature.
It's a unibody design now, so it feels a bit more sturdy, and it has beveled edges that make it easier to grip.
Arnaud's interiors are a time warp with Italian mosaic tile floors, vintage light fixtures and original beveled glass windows, fluted columns and doors.
Gilliam also stretched the canvas on a beveled frame, so that when the painting was hung it seemed to materialize out of the wall.
People apparently had trouble touching the cross-beveled touchpad on the Gear VR, so Samsung removed the indentation and made the entire touchpad wider.
The HTC 10 feels great in the hand due to its curved back and large beveled chamfer that makes it feel thinner than it is.
There are classic plain comfort-fit bands, brushed and beveled bands, and even a two-tone style with a different metal inside and outside the band.
Moreover, the beveled edges, particularly those bordering the surfaces angled away from the dominant planes, suggest movement — something not quite still or sedentary in the world.
The four corners are beveled so there are no sharp corners, but the wood is still solid and would definitely hurt if your baby fell on it.
Thurmond got out of his cruiser to inspect his new home, a brick and wood-paneled bungalow with peeling paint above the brim of a beveled awning.
Ludovico Sergardi, who oversaw public works at Saint Peter's Basilica, helped introduce the beveled black basalt cobblestones, known as sampietrini, which are central to the city's charm.
The radical abstract "beveled-edge" and "drape" paintings by the African-American artist Sam Gilliam are currently the focus of a show at the Kunstmuseum in Basel.
Actually, the only filter Mikayla Whitmore used to create them was a 4-foot-tall hunk of beveled glass, which her subjects couldn't resist smooshing their faces against.
The all-metal phone with the thick beveled chamfer on the back is very reminiscent of the HTC 22 released earlier this year with a few small differences.
The work is conspicuously framed with wide, beveled-wood molding painted a tasteful, décor-friendly purplish-red that looks great (and somehow slightly rueful) against the photo's sooty tones.
Dia:Beacon is wisely catching this wave as it crests by showing several of his pieces, including beveled-edge paintings and his drape paintings, which are suspended from the ceiling.
He beveled the top edge of the blocks inward so that by the third or fourth row he was laying them at a 45-degree angle to the ground.
The Mac Pro's glossy exterior and chrome beveled edges meant Apple had to make its own manufacturing tools and then train people to run those machines in an assembly plant.
The ceramic wall reliefs have beveled sides and are marked with shapes evoking bowties and tables or combs, along with circles, triangles, rectangles, bands of different widths, diamonds, and zigzags.
I also like the shape of the saucepans; the beveled edge allows you to roll the pan a bit more on the stove than something with a harder, squarer chine.
In case you're wondering, here's a short list of everything we love: Liberal use of Comic Sans, ugly beveled buttons, chintzy icons, scrolling rainbows, HTML style site sections, and clipart backgrounds.
As he coaxed the beveled shapes of his loop collages from his keyboards in real time, his voice was like a hologram, somehow high and low, pure and creaky at once.
And it was: a sturdy tall vessel of beveled, embossed glass, the first of a dozen bottles that the old dump would surrender over the next hour to Mr. Jordan's eager digging.
The kitchen has 3.5-inch-thick beveled Carrara marble countertops, a center island that seats six, two ovens, two dishwashers, a Sub-Zero refrigerator and freezer and a large glass wine cooler.
It is so smooth, he beveled the edges, and it's just a rectangle of wood, and everyone I've shown it to has this deep physical reaction to the piece of wood, it's fascinating.
Such finishes — like hand-beveled bridges that require 2000 hours of work or tiny screws topped with a special insignia — are Mr. Gauthier's signature, earning him something of a reputation in the industry.
The back of the HTC 25 is, let's say, unique looking with oversized beveled edges and the headphone jack relocated to the top; it was next to the USB port on last year's M22016.
A pair of photographs I took of "Untitled (White Inner Band, Beveled)" (1993) a few feet apart provides a sense of how the admixture creates a strange glow at the bottom of the canvas.
There's the display of his painting innovations, such as the works with beveled edges or the draped paintings, plus the story of who Sam Gilliam is, which is almost as compelling as the work itself.
To the right is the dining room; to the left, a kitchen laid out over two rooms, with wide-board floors, beveled cabinets, duplicate sinks and stoves and French doors opening to a stone patio.
The floor will be made of tile mosaics, herringbone-patterned walnut and blends of white Carrara and Nero marquina marble; the walls fashioned from black beveled Bendheim glass; the furniture, midcentury and assembled in Portugal.
Sure, the new MacBook Pro is razor thin and beautifully beveled, but it'll never fill the giant, rectangular hole in your heart left by the 25-pound Osborne 1—the world's first truly portable computer.
This level also has a parlor with a fireplace, an office with a fireplace, a sunroom with its original beveled glass and a kitchen with stained-glass ceiling lamps from the Somers studio in New York.
When you pull it out of the cure at the end of the week, you will see how changed the texture is — and you'll feel it too, as you slice thin sheets with a sharp, beveled blade.
The previous owner had preserved and protected its abundant Old World charm — paneled walls and ceilings, wainscoting, crown molding, herringbone floors, beveled leaded-glass doors — while showing an appreciation for modern conveniences of the Sub-Zero kind.
In "A Quiet Romance" (2017) the pinks and whites of a conch — its stout and beveled shell dwarfing a pearl-like moon — are set in an all-over violet backdrop that stands in for sky and sea.
Birds in Paradise ($250) gestures at "the fuchsia scent of ripe guava flesh," she says, while Gilded Age ($350) is an olfactory rendering of light flooding through beveled glass with notes of gold ambergris and oud wood smoke.
It belongs to Mr. Gilliam's "Beveled-Edged" series, in which he slants his stretcher bars at a 45-degree angle, making them instantly visible to the viewer and adding an element of bulk or boxiness to the painting.
With an extra-large 45-inch x 23.75-inch gaming surface and a beveled front cutout that keeps you closer to the monitor without sacrificing accessory space, this desk will ensure you're always in the action and ready to go.
A different kind of BoomSound As we've seen before in leaked renders and previous photos of the device itself, HTC is sticking with its tried-and-true design language, but with oversized beveled edges on the rear this time around.
The finishes in individual apartments are upscale yet deliberately simple, with white oak herringbone-patterned floors, white lacquer Pedini kitchen cabinets with woven metal inserts and beveled metal trim, and white Arabescato Cervaiole marble in the kitchens and master bathrooms.
They include chairs for a church in the form of a simple box, with three planes beveled into the top to form a seat, as well as the adroit stools of SESC Pompéia, each made from four orthogonal planes of economical pine.
Materials: Sintra PVC foam core, EVA foam Velcro Adhesive: Contact cement, super glue Acrylic paint Dancer's leotard, black Knives: X-acto, beveled, multitool Red fabric Safety pins Estimated Total Cost: $150 Corey Isaac and Natasha Dalton, his fiancée and fellow cosplayer, live in Douglasville, Ga., a suburb outside of Atlanta.
Last year, they landed on the idea of '60s-era Indian railway cars, an inspiration that resulted in a suite of boxy wood-laminate seating; another shared preoccupation was anodized aluminum, which they later used across a collection of armchairs and tables with beveled corners reminiscent of the Chrysler Building.
The Notebook 9 Pro is the more radical update of the two: Samsung has scrapped the sloping curves, bubbly corners, and painted plastic feel of the previous generation for a sharper design with beveled edges and tighter corner radii for a more modern design that looks and feels like a premium flagship again.
Dix skillfully attends to the large dog's vigorous musculature and firm posture, sleek hair, firm ears, half-opened jaw, beveled teeth and protruding tongue, and alert orange and brown eye; each canine feature has a counterpoint in Erfurth's human figure — his stooped shoulders, sagging cheek, prominent chin and floppy ears, and mild, uncertain and glazed eyes.
It uses airproof seat and beveled wedge disc with small friction and torque.
In the semiconductor industry, wafers have two typical edge types: a slanted beveled shape or a rounded bullet shape. The edges on the beveled types are called the bevel region, and they are typically ground at a 22 degree angle.
A beveled glass mirror, ca. 1910 Beveled glass is usually made by taking thick glass and creating an angled surface cut (bevel) around the entire periphery. Bevels act as prisms in sunlight creating an interesting color diffraction which both highlights the glass work and provides a spectrum of colors which would ordinarily be absent in clear float glass. Beveled glass can be obtained as clusters which are arranged to create a specific design.
This white beveled tile has been predominant in the Paris metro system for over a century. The photo shows recent retiling in this classic 1900 style. Pasteur station in the first decade of the métro's operation shows how insufficient the lighting was. The famous beveled white tile is nevertheless clearly visible.
Very fine detailing includes molded pilasters, a carved wreath above the main entry, paneled oak doors, and beveled glass.
The furnishings in the courtroom, including the chandeliers, plasterwork, beveled glass doors and stained glass work are all original.
Beveled retaining rings feature a 15° beveled or angled edge. This angle allows the ring to wedge itself between the groove and the retained part until it can go no farther, effectively “locking” everything in place. Think of placing a cork in a bottle. The cork is forced into the opening until it is wedged as far into the opening as possible.
The western portal is partly interrupted by the beveled north-west corner and so has an asymmetric arraignment of a pointed arch portal and windows.
This process is completed until the entire length of the cut has been appropriately beveled. As a general rule, the outside of curves and the outside edge of anything overlapping another part of the design is beveled. The exception to this rule is leather that will later be stamped with another tool, and, if the background is to be treated with the background tool, the background itself.
Doctor blades are traditionally designed in 3 main tip configurations: straight, bevel and lamella. A straight doctor blade has a straight, blunt edge and is used for lower quality print. A beveled doctor blade is cut at an angle creating a beveled edge. A lamella tip is a doctor blade with a unique geometry that is thin at the tip, gradually becoming larger in a step pattern or other design.
On the south wall of the parlor is a brick fireplace, built later, with original wooden mantelpiece. The windows have heavy oak trim, raised panels beneath them and a beveled-edge mirror between the two on the west wall. The room on the north side of the hall has a brick corner fireplace with an oak mantel and beveled mirror above. One of the original cranes remains in the fireplace.
Beveled rim bowls are widely thought to be used for measurement of barley and oil as rations. The rations would be given as payment to laborers for services rendered. This idea is supported by the resemblance of the beveled rim bowls to the cuneiform sign for ration (NINDA). It is also supported by the fact that the bowls are often found whole and in large piles as if they were disposable.
Products using the process indirectly are tubes and pipes where the edge of the strip is accurately beveled prior to being folded into tubular form and seam welded. The beveled edges enable pinhole free welds. Skiving requires a minimum material feed rate to cut successfully. At speeds below those of metal planing or about 10 meters/minute (33 feet/minute), the skiving tools can be vibrated at high frequency to increase the relative speed between the tool and workpiece.
While the exact method for production of beveled rim bowls is unknown, the most widely accepted theory is the use of a mold. A lesser accepted theory is that the bowls were made by hand. Archeologists replicating beveled rim bowls have found it considerably difficult to achieve the straight sides and well defined base while only using their hands. The use of a mold has been found to be a significant advantage when replicating the bowls.
A table saw is intended to make long precise cuts along the grain pattern of the board known as rip cuts. Most table saws offer the option of a beveled rip cut.
In Disc Golf, the 'beveled edge' was patented in 1983 by Dave Dunipace who founded Innova Champion Discs. This element transformed the Frisbee into the farther flying golf discs the sport uses today.
The upperside is covered with several dark dots. The scutellum usually shows an evident black patch.British Bugs The ventral face is largely punctuated with black. Lateral corners of the pronotum are simply beveled.
The Soma water filtration system consists of a glass carafe and a biodegradable water filter. The carafe is contoured to fit hands and has a beveled edge to prevent spilling.Product Spotlight: Soma Water. Dwell Magazine.
AddDepth is a discontinued software for extruding 2D shapes into 3D images with the option of beveled effects. MetaCreations Detailer and Painter 3D are discontinued software applications specifically for painting texture maps on 3D Models.
The width of the bevel also can vary depending on the desired effect. The combination of beveled glass is juxtaposed to the textured glass creating dramatic visual effects. Beveling was traditionally done manually by grinding and polishing operations: Modern beveled glass is machine made. The automation of this traditionally hand made craft was facilitated by the development of plastic based metal deburring wheels which provided adequate smoothing of the ground glass face without the difficulties involved with traditional aluminum oxide and natural sandstone smoothing stones.
The large aperture is very oblique. The lip forms half of a circle. It is not so much thickened nor beveled within as in Phorcus articulatus. The columella is more flattened than that of Phorcus articulatus.
On the front portico facing Bearskin Lake, doric columns rise over forty feet in height. The interior features a dramatic double staircase, original beveled glass windows, sliding oak pocket doors, handcrafted woodwork and Carrara marble fireplaces.
The spire elevated. There are about 10 whorls, concave above, swollen and projecting at the periphery, the last obtusely angled. The oblique aperture is quadrate. The outer lip is beveled, strongly 5 or 6 lirate within.
The house has a beveled water table and the walls are laid in Flemish bond. The entrance is reached by a small flight of steps with a large door with raised panels and a transom window.
The food-drying house has beveled horizontal siding. There are shallow drawers for the food to be dried. The smokehouse and bake oven have vertical wood siding. All three buildings appear to be from about 1900.
A right-handed pastry fork A pastry fork, pie fork or cake fork is a fork designed for eating pastries and other desserts from a plate. The fork has three or four tines. The three-tine fork has a larger, flattened and beveled tine on the side while the four-tine fork has the first and second tine connected or bridged together and beveled. Pastry forks range in size from 4 inches (10 cm) (in English pastry fork sets) to 7 inches (19 cm) as serving pieces in silverware (sterling and silver plate) place settings.
Beveled rim bowls are generally uniform in size standing roughly 10 cm tall with the mouth of the bowl being approximately 18 cm in diameter. The sides of the bowls have a straight steep angle down to a very defined base usually 9 cm in diameter. The bowls are made of low fired clay and have relatively thick walls compared to other forms of pottery of the time—making them surprisingly robust. The most unusual aspects of beveled rim bowls are that they are undecorated and found discarded in large quantities.
The large numbers of beveled rim bowls found (often in a single site) seem to support the mold theory because mass production with a mold is far more feasible than making them by hand. A debate exists among advocates of the mold theory. Most impose the use of a mobile mold that could be made of a variety of materials including wood, metal, stone or even another beveled rim bowl. Others suggest that craftsmen would have used a ground mold wherein the bowls were formed in a conical depression created in the ground.
The Belcher Mountains are a former mountain range that stood in the Hudson Bay region of Canada in the late Precambrian. The mountains have since been uplifted and folded erosion has beveled them into a nearly flat plain.
An optical microscope may include a ground- or frosted-glass diffuser to evenly illuminate the field behind the specimen. Microscope slides are often ground on the sides and beveled on the corners to soften the edges for safer handling.
The body whorl is rounded (or a trifle angled) around the lower part, slightly convex beneath. The oblique aperture is rounded. The outer lip is fluted within, with a beveled opaque white submargin. The throat is pearly and iridescent;.
The sutures are impressed. The 7 whorls are convex, the last one rounded (or a trifle angled) around the lower part, slightly convex beneath. The rounded aperture is oblique. The outer lip is fluted w'thin, with a beveled opaque white submargin.
It has an arched opening with beveled edges on the rectangular top. Its projecting keystone is decorated with thin incised baroque curves. The stub of a chimney still rises from it. Double doors lead into the living room to the east.
A one-story porch running the length of the street facade, and uses a simple configuration supported by three square posts with beveled corners. The windows for this section are two-over-two double hung and capped with simple cornices.
The roof is covered in wood shingles. There is an overhang, showing the rafters in the soffit area. The wall are covered with horizontal tongue-and-groove beveled siding. Corner boards at used where each wall section adjoins the next.
Outside curves and straight lines are ground on a flat rotating platter covered in a thin slurry of silicon carbide and water. Inside curves were ground on a silicon carbide grinding wheel of appropriate grit with water running on the wheel. Smoothing the ground face was done using the Newcastle stone for outside curves and straight line bevels and a cone shaped polishing wheel of relatively fine grit aluminum oxide. Despite the advantages of the plastic smoothing wheels, the crispness of the bevel edge is superior on the stone smoothed traditionally beveled pieces and can distinguish hand made beveled glass.
The final step was polishing the beveled face using a felt covered wheel with a slurry of water and optical polishing powder. It was not uncommon to have pieces with a combination of outside and inside curve as well as straight line bevels. The objective was to have an even bevel width, even edge thickness with no facets in the bevel face and a crisp bevel edge. In the early 1900s in USA it was not uncommon to see beveled oval door glass 5' in length with 2" wide bevels on 3/8" thick plate glass.
The house was built in 1891. The turret reaches approximately 50 feet. It includes a bedroom on the first floor for a servant. It contains two lead glass Oriel windows, a Palladian window, curved glass in the turret, and beveled lead glass windows.
A small light-weight piece, 10.7 × 5.8 × 2.7 cm, of unknown wood and darkened with age. One end has been beveled to a sharp edge, the other, broken off and smoothed. Side a is badly cracked. It is the smallest intact piece.
Convex blades usually need to be made from thicker stock than other blades. This is also known as hamaguriba in Japanese kitchen knives, both single- and double-beveled. Hamaguriba means "clam-shaped edge". It is possible to combine grinds or produce other variations.
The windows are pointed arches with quatrefoils. Construction is wood frame with drop or beveled siding. The detailing is principally plain flat material, with some evidence of Stick Style influence. St. Paul's Episcopal Church was listed on the National Register of Historic Places in 1980.
Where the existing beveled tile was in good repair, the Andreu-Motte style was applied over the original tile, but in stations where more extensive tile replacement was called for, the beveled tiling was replaced by flat white rectangular tiles. To introduce color into the stations, a coordinated colour scheme was added to elements of the train hall – the seating, light housings, and walls of connecting corridors. Five main colour schemes were used: yellow, red, green, blue and orange. An aim was to facilitate subliminal recognition of stations by passengers, since particular stations took on colour identities – for example, Ledru-Rollin is blue and Voltaire yellow.
It sits on a stone foundation and is shingled. The entry door is flanked by beveled glass, and two windows flank the door. The second floor contains five windows. All windows are wood sash, double-hung windows, and either six-over-six, or eight-over-eight.
Dinking is a manufacturing process. Dinking uses special dies called dinking dies, or hollow cutters. The edges of the dies are usually beveled about 20° and sharpened. The material is punched through into a wood or soft metal block in order to not dull the edges.
The whole is closely sharply sculptured by radiating lamellae. The very oblique aperture is subquadrate with about 9 sharp entering lirae. The outer lip is beveled. The short columella is subvertical and cylindrical, with three or four small, transverse, rather acute folds on the lower half.
The Seventh Avenue side of the home features one of the best examples of residential stained glass in Rock Island. It contains a semi-circular stained glass panel atop a large square beveled glass sash. The 99 faceted jewels are fashioned in an asymmetrical floral design.
In 1908, Royal began manufacturing there. In 1911, Royal introduced the Royal 5 typewriter, which also utilized the "flatbed" design. Royal's first model utilizing the "upright" design was the Royal 10, which came out in 1914. Original models had two beveled glass panes on each side.
Morgan, Diane (2007); From Satan's crown to the holy grail: emeralds in myth, magic, and history, Praeger Publishers Inc., The gem's cut gives the appearance of a series of concentric squares within the gemstone (known as a beveled square emerald cut.) In total, the brooch contains approximately of diamonds.
Several rooms have pressed tin ceilings. All of the interior trim is oak, as is much of the tongue-and-groove flooring. One striking feature is a beveled glass door to the closet opposite the bathroom door. There are pocket doors between the dining room and the front bedroom.
Streams eroded the poorly cemented Navajo Sandstone, and water caused the sand to slump. Desert conditions returned briefly, creating the White Throne member, but encroaching seas again beveled the coastline, forming a regional unconformity. Thin beds of clay and silt mark the end of this formation.Harris 1997, p.
Certs were not always this shape. Prior to the current form, they were more regular discs with beveled edges. Each Certs is embossed on one side with the legend "CERTS RETSYN" in letters about 3 mm tall, approximately midway between center and edge, each letter oriented away from the center.
Marbleized plaster, scagliola, panels complete the walls. The building's ceilings are decorated with plaster cornices and molded leaf and rosette complements. The Honduras mahogany doors have a rail and panel design and beveled glass is used for decorative side lights and panels.This postcard from the early 20th century shows the McLean County Courthouse.
The three original courtrooms are decorated with frescoes, marble dadoes and scagliola. The original fresco remains in the Stevenson-Ives library. Other notable architectural features include many beveled and leaded glass panels, scagliola door surrounds, solid bronze wall partitions, a number of original bronze, combination gas and electrical light fixtures and marble counters.
The main theme of this station is Health. The platforms of Line 12 present research work led by Louis Pasteur. They are arranged in the Andreu-Motte orange style, with lighting strips and tympans in this colour. The benches are of beveled white tiling, unique case, and the seats are Motte white.
The latter are covered with white beveled tiles, as are the walls and the vault. The advertising frames are metallic and the name of the station is written on enamelled plates, with an unusual font for the Paris metro. The seats are Akiko style blue. The Line 7 station is also available.
The body whorl is globose, convex below and has a rounded periphery. The aperture is rounded. The outer lip is slightly crenated by the spiral ribs, dark-margined, and beveled to an edge. It is thickened by a heavy white rim inside, which is slightly notched at the periphery, but elsewhere is smooth.
Kettle gongs are round, bronze, and pitched. They are often mounted horizontally on suspended chords as part of a frame. Positioned this way, there is an opening on the bottom, slightly beveled bow on top, and a protruding center called the boss. The kettles are arranged from low to high, left to right.
Played at the St Gissop School, West Sussex, this version is similar to Eton Fives except that a beveled stone 'balustrade' features three feet and three inches above the floor of the tangential wall of the court. The game was supposedly invented by alumnus George Henry Steering, who excelled at the game.
Habuba Kabira South in Syria Beveled rim bowls are small, undecorated, mass- produced clay bowls most common in the 4th millennium B.C. They constitute roughly three quarters of all ceramics found in Uruk culture sites, are therefore a unique and reliable indicator of the presence of the Uruk culture in ancient Mesopotamia.
In 2003, Kahr Arms introduced Elite versions of the MK9 and MK40. The elite variants feature a polished stainless steel finish and a laser etching on the slide. In addition to an enhanced look, the magazine well is beveled to facilitate easier reloading, and the feed ramp is polished to insure reliable feeding.
The porch is an odd assortment of institutional form with residential features such as the beveled glass. WOC radio had its first studio on the porch. The home contains an Aeolian player pipe organ that was purchased by the Palmers for $75,000. B.J. Palmer's favorite room in the house was called the rustic room.
Combined with a long scale length, stainless steel pyramidal fret rails, very low string action, and very sensitive pickups, this setup is advantageous to the tapping style of play. The rear surface of the instrument is not curved like a guitar neck, but has deep- beveled edges (also a design trademark of the Stick).
A single window faced eastward from the kitchen-hall. Windows were flush with the exterior walls of the house. The window wells were beveled, widening toward the interior of the house; this admitted more light to the house. The configuration of the west wall is not known, since the wall was removed in 1924.
The exterior is covered with beveled siding. The hammerbeam roof was originally covered with wood shingles but these have been replaced with asphalt shingles. A parish hall was built in 1893, which was later incorporated into a 1956 church building. In 1894, a shallow basement was added under the wood frame church for the furnace.
The fourth metatarsal is beveled (slightly slopes to the side) compared to the rest of the foot. This is intermediate between Falcarius, which has no slope, and therizinosaurids, which have a fourth metatarsal angled at 90 degrees to the rest of the foot. None of the metatarsals are ginglymoidal, but the toe bones are.
The second floor is more restrained in its detailing, almost to the point of relative austerity compared with the first. The house's windows are fitted with beveled glass. Eaves are supported by brackets interspersed with decorative relief over the second floor windows. The hipped roof is outfitted with small dormers with diamond-pane windows.
Broadway Market Building was a historic commercial building located at Asheville, Buncombe County, North Carolina. It was built about 1916, and was a two-story building constructed of hand-pressed panel-face concrete block with beveled edges. The building has been demolished. It was listed on the National Register of Historic Places in 2003.
Floor plan of the church The church is an uneven, mostly rectangular, sharply beveled on the north-west corner basilica. It lacks a crossing and transepts. The polygonal choir and nave share a single roof and there are side chapels between the buttresses on the south side. The massive tower makes up the north-east corner.
The suture is linear, but strongly, not acutely defined by the perpendicular rise of the whorl above it and the slight sloping shoulder below. The aperture is round, scarcely oblique, with a translucent porcelaneous edge, and pearly within. The sharp outer lip is not descending. Its inner edge is beveled outwards at the expense of the pearly layer.
A listener calls in and talks briefly about a special item that they are in possession of, Hamish & Andy ask them questions about the item to try to guess if the caller really has the item or is attempting to dupe them. The winners sometimes receive a 6-inch, slightly beveled Hamish and Andy branded ruler.
Constructed in 1928, the church is built of concrete block > and wood lath with a stucco finish. The gable-roofed portico is supported by > four posts. Two posts rest on the concrete steps, the outer posts are set > directly in the ground. The front gables of the both the portico and the > roof are clad in beveled weatherboard.
Opposite the door is its fireplace, likewise of brick and topped with a beveled mirror to a height of . Behind it the library includes many original trim, particularly a deep painted frieze depicting kachina dolls, reflecting Grey's interests in the Southwest. These rooms, and Grey's upstairs studio, house most of the museum exhibits and visitor interest today.
Traditional fire-making is a likely cause of the gouge on the recto. A fluted, delicately carved but fire-damaged tablet, 44.5 × 11.6 × 2.7 cm, of Pacific rosewood (Orliac 2005). The wood is bent, following the contours of the tree from which it was cut. The sides are beveled, perhaps to make a larger writing surface.
Beveled rim bowls originated in the city state of Uruk in the mid-fourth millennium B.C. As the Uruk culture expanded so did the production and use of these bowls. According to Marc Van De Mieroop, “Examples have been excavated in the Zagros mountains (e.g., Godin Tepe, Choga Gavaneh), in northern (e.g., Tepe, Ozbeki, Tepe Sialk), central (e.g.
The homes featured amenities like "beveled- glass china cabinets, marble fireplaces and mahogany floors". It was accessible to downtown via streetcar and attracted upper-middle-class families. Many of the hundred-year-old homes are still standing and have been renovated and upgraded. The neighborhood is part of the West Adams Terrace Historic Preservation Overlay Zone (HPOZ).
Bossages are also rustic work, consisting of stones which seem to advance beyond the surface of the building, by reason of indentures, or channels left in the joinings; used chiefly in the corners of buildings, and called rustic quoins. The cavity or indenture may be round, square, chamfered, beveled, diamond-shaped, or enclosed with a cavetto or listel.
The American-box camera had beveled edges at the front and rear, and an opening in the rear where the formed image could be viewed on ground glass. The top of the camera had hinged doors for placing photographic plates. Inside there was one available slot for distant objects, and another slot in the back for close-ups.
Larger brackets support the entrance balcony. Galleries with turned spindles and urn-shaped finials flank the entrance. The gallery on the north is extended to form a porte cochere. On the north side of the home is a beveled and leaded stairway window. A two-story bay on the south side features a “bottle glass” window.
To ease insertion into a hole the longer tine may be slightly curved to overlap the tip of the shorter tine or it is beveled. Hammer lock split pins are properly installed by striking the head with a hammer to secure the pin. This forces the shorter tine forward, spreading the pin.. Types include Standard, Humped and Clinch.
The front façade, on the south, include a Colonial Revival porch and a two-story bay. Two wooden Tuscan columns support porch roof. Above the front door is a rectangular glass transom of beveled and leaded white glass with the house number backed in red. West of the porch is the two-story bay with floor to ceiling windows.
These vessels have no tops, making it easy to harvest top-fermenting yeasts. The open tops of the vessels increase the risk of contamination, but proper cleaning procedures help to control the risk. Fermentation tanks are typically made of stainless steel. Simple cylindrical tanks with beveled ends are arranged vertically, and conditioning tanks are usually laid out horizontally.
Library Hall is considered to be an example of Romanesque architecture, designed by Elgin firm Turnbull & Jones. The exterior walls were constructed with St. Louis pressed brick with Bedford Limestone trimmings. The gutters are made of copper, which have oxidized. The front of the building features beveled glass while the rear has stained glass art windows.
There is an inscription on the left jamb of the door which Burgess was unable to decipher. Sketch of ruined roof (north side). The arch shaped motifs include reliefs. Inscription on the left jamb of the door The shikhara (spire) is formed by six or seven courses having beveled edges followed by square faces and at last the apex covered by single slab.
The roof has five gables and a front-facing hipped dormer. A wraparound porch with Tuscan columns and spindlework extends across half the facade. The front entryway contains double doors with beveled glass lights. Six large windows with leaded glass transoms are in the front and side facades, and an Art Glass window next to the front entrance illuminates the main staircase.
A low hedge runs along the Church Street side. A parking lot is in the rear. The building itself is a one-story steel frame building on a raised foundation of poured concretesided in brick laid in English bond. The five-bay front facade is distinguished by a projecting three-bay central pavilion with a beveled-cornered hipped roof covered in slate.
Carlosruizite occurs as thin, colorless to pale yellow, transparent, euhedral, platy crystals with hexagonal outline, generally <200 μm in diameter and 20 μm thick. The crystals have a pseudorhombohedral habit, flattened on {0001} with beveled edges {1012}. They are slowly soluble in H2O. Surfaces of some crystals show abundant round or elongate cavities, which probably were formerly filled with saline fluids.
Generally, the right-hand side of the blade is angled, as most people use the knife with their right hand. Left-handed models are rare and must be specially ordered and custom made. Since the end of World War II, western-style, double-beveled knives have gained popularity in Japan. One example of this transition is the santoku, an adaptation of gyoto.
Kinney Heights was developed around 1900 by developer Abbott Kinney, for whom it is named. It was a suburban tract of large Craftsman style homes at what was then the western edge of Los Angeles. The homes featured amenities like "beveled-glass china cabinets, marble fireplaces and mahogany floors". It was accessible to downtown via streetcar and attracted upper-middle-class families.
St. Paul's Protestant Episcopal Church is a historic frame Episcopal church located at Tulls Corner, Somerset County, Maryland. Built in 1848, it is a Carpenter Gothic-style church sheathed with beveled-edge board-and-batten siding. Also on the property is a cemetery surrounded by an early-20th century iron fence. It was listed on the National Register of Historic Places in 1990.
The McKenzie House is a historic house at 4911 Arkansas Highway 161 in Scott, Arkansas. It is a modest single-story wood frame structure, with a side gable roof, weatherboard siding, and a concrete block foundation. It has vernacular Italianate features, including windows in beveled corner window bays, and gablets over a pair of symmetrically placed entrances. It was built c.
Ocean Island Inn is a historic building in Victoria, British Columbia, Canada; it is Vancouver Island's largest backpackers' inn. Located at 791 Pandora Avenue in Downtown Victoria, it is a four-storey heritage building,City of Victoria Inventory of Heritage Buildings , November 2008. Pg, 18 readily distinguishable by its Italianate architectural form and massing, and by its distinctive beveled corner.
Kinney Heights was developed around 1900 by developer Abbot Kinney, for whom it is named. It was a suburban tract of large wealthy Craftsman style houses at what was then the western edge of Los Angeles. The houses featured amenities like "beveled-glass china cabinets, marble fireplaces and mahogany floors". It was accessible to downtown via streetcar and attracted upper-class families.
Several sculptural features and artworks adorn the conservatory. The ornate beveled glass lunette window found just above the entry is original to 1912. In 1981, the conservatory added a hand blown and stained green glass canopy designed by Richard Spaulding and entitled “Homage in Green” to the entry vestibule. Additional green glass pieces, also designed by Spaulding, were added in 1982 and 1995.
The five whorls have a height of 16 mm and a maximum diameter 5.75 mm. The small, slender shell is elongate. It contains more than 6 flattish whorls (specimen decollate). The suture is distinct, separated from the fasciole in front by an elevated spiral ridge, carinated and beveled from the carina to the suture which is slightly undulated by the ribs.
Uruk-period beveled rim bowl, ca. 3400–3200 BCE, from Habuba Kabira in Syria Habuba Kabira (Tell Qanas) is the site of an Uruk settlement along the Euphrates in Syria, founded during the later part of the Uruk period. It was about 800 mi (1,300 km) from the city of Uruk. The site is now mostly underwater due to the Tabqa Dam project.
The base of the shell is rather flattened, somewhat concave around the umbilicus, and generally eroded in front of the aperture. The aperture is oblique. The outer lip beveled to an acute edge, which is usually margined with green and is sulcated or crenulated, the furrows corresponding to the lirae of the outer surface. The pearly throat is also more or less sulcate.
Modern needles are 12 to 15 cm long, with an external diameter of 2 mm. The outer cannula consists of a beveled needle point for cutting through tissues of the abdominal wall. A spring-loaded, inner stylet is positioned within the outer cannula. This inner stylet has a dull tip to protect any viscera from injury by the sharp, outer cannula.
Mid-range discs feature a dull, beveled edge and a moderate rim width. They offer more control than drivers, but they have a smaller range. Mid-range discs are typically used as approach discs. Beginner players will often use mid-ranges instead of drivers at tee- off, as they require less strength and technique to fly straight than higher speed drivers.
The chert has been identified as coming from quarries in central Florida. Projectile points from the sinkhole have been classified as Bolen Beveled, Dalton, and Greenbriar, dated to 10,000 to 12,000 years ago.Carr 2012: 34-37 Human bones and teeth from at least five individuals were found in the Cutler sinkhole. Some of the individuals appear to have been buried in graves.
The church building is cross-shaped. It has two chapels - the first one in the name of the Holy Great Martyr Barbara and in the name of St. George the Victorious. On the perimeter of the facade, the walls are decorated with decorative cornices. The central dome is four-sided, with beveled edges and has four windows on each side.
Weese designed each cell with a floor-to-ceiling slit window, long by wide, narrow enough not to require bars, and beveled out to allow natural light to pass inside. The cells were originally designed to feel as comfortable as possible, based on sailboat cabins, with built-in hardwood beds and desks. Most of these features have since been removed.
Shield of Paraguay Concrete Shield of Paraguay Ornamental constructive element exponent of Paraguayan culture. Wind proof door with beveled glass with Paraguay's shield. Paraguay's shield was created by José Gaspar Rodríguez de Francia in 1820. next to Paraguay's shield is the one named "Hacienda" created by the consuls Mariano R. Alonso and Carlos A. López in the Extraordinary Congress, 25 November 1842.
Sickles were sharpened by scraping a shape beveled edge with a coarse tool. This action has left marks on artifacts that have been found. The sharpening process was necessary to keep the cutting edge from being dulled after extended use. The edge is seen to be quite highly polished, which in part proves that the instrument was used to cut grass.
Beveled-rim bowl, c. 3400-3200 BCE Pottery found at Uruk includes wheel made, hand-made and molded pieces. Potters at Uruk specialized in mass-produced functional vessels. The fast potter's wheel was introduced during the later part of the Uruk period, making it quicker and easier to produce pottery on a massive scale and with a greater sense of standardization.
"Landmarks in the Landscape", San Francisco: Chronicle Books , p. 160 Access to the chapel is by boardwalk, leading to a beveled plank door with decorative ironwork. The by T-shaped chapel has exposed log interior walls with stained glass windows on either side. Behind the altar on the chapel's axis, a picture window frames a view that substitutes for a stained glass composition.
Contrary to popular belief, endodontically treated teeth are not brittle after being devitalized according to the following study -CM Sedglay & Messer 1992 Journal of Endodontics. Contrary to what some dentists believe, a bevel is not at all suitable for implementing the ferrule effect, and beveled tooth structure may not be included in the 2 mm of required tooth structure for a ferrule.
The Kieldson Double House in Boise, Idaho, is a 2-story, brick and stone building with a Renaissance Revival facade containing late medieval elements. The duplex was designed by Tourtellotte & Co. and constructed in 1903. It features two prominent, beveled bays each on either side of a common porch. The site was added to the National Register of Historic Places (NRHP) in 1982.
The John J. and Agnes Shea House is a historic building located in Council Bluffs, Iowa, United States. This is the only brick Queen Anne house in the city with a corner tower topped by a witch's cap. with The 2½-story structure features an asymmetrical plan, complex roofline, corbelled chimneys, gables, bays, and porches. It also contains beveled, rounded and stained glass windows.
In adults, the bill is ivory in color, while it is chalky white in juveniles. Among North American woodpeckers, the ivory-billed woodpecker is unique in having a bill whose tip is quite flattened laterally, shaped much like a beveled wood chisel. These characteristics distinguish them from the smaller and darker-billed pileated woodpecker. The pileated woodpecker normally is brownish-black, smoky, or slaty black in color.
The Waterman Hémisphère is a pen introduced in 1994 by the French pen company, Waterman. The Hémisphère is a light pen that has a cigar shaped barrel with a beveled top and usual Waterman clip. It comes in many colours (metallic, blue, green, red, cognac), a lacquer finish, or a brushed chrome or gold finish. The clip comes in chrome or 24-karat gold finish.
The church in Šenčur is dedicated to Saint George (). It is a single-nave structure with a rectangular chancel with beveled corners that was built in 1747 on the site of an earlier building. The furnishings are Baroque, and the chancel arch features a 1750 fresco painted by Franc Jelovšek (1700–1764). The church also contains paintings by Janez (1850–1889) and Jurij Šubic (1855–1890).
The decoration itself is composed of a frame containing the enameled coat of arms of the primary countries of the Americas, and in the top-center is the coat of arms of Spain, the set is accentuated with alternating smooth and wavy beveled rays. It was created by Manuel Seco de Velasco and designed by Evaristo Domínguez, a painter from Palos de la Frontera.
Paneled wainscoting is on the lower walls, with lath and plaster finishing above and on the ceiling. The deeply recessed windows reveal the width of the walls. Both parlors have fireplaces with Federal style wooden mantels with a five-part entablature, beveled panels and bulbous colonettes on the front one. The rear substitutes a molded frieze for the colonettes but has a similar five-part structure.
The front facade includes a bay window, and two of the other front windows have a transom sash, one with stained glass in the transom area and the other with beveled glass. Three more large transomed windows are in other elevations, and the remainder of the house's windows are narrow one over ones. The windows are topped with a segmental arch formed of corbelled bricks.
The Campbell House is a historic house at 714 West Third Street in Rogers, Arkansas. It is a two-story L-shaped wood frame structure with clapboard siding. Its corners are beveled, with overhanging gable corners above, and decorative woodwork in the gable ends above. The entry porch, in the crook of the L, is supported by turned columns with a spindled latticework frieze.
The original decoration of the Métro's underground train halls was austere. Stations featured plain white tiles, enamel plaques for the station name, a few wooden benches and the station manager's kiosk in the middle of the platform. Within a few years advertising billboards and confectionery machines appeared. The now-famous beveled white tiles (of Gien earthenware) were chosen for their effective reflection of ambient light.
The front porch, accessible via concrete steps, leads to the paneled oak front door with beveled glass. The screen door, of white aluminum, was installed in 2001. To the right of the front door is a bay window with decorative brickwork. A similar bay window with a hipped roof is located on the right (north) side of the home, next to a tall brick chimney.
It is composed of a 5,000-bushel grain bin between two 4,000-bushel cribs. It is capped with a gambrel roof and a gambrel roof cupola that houses elevator machinery that lifts ear corn and grain and directs them into the cribs. The floor of the building is composed of concrete and the walls are beveled pine boards, or cribbing, that are spaced to allow for ventilation.
A handguard was added above the barrel to prevent burns, and the formerly fixed barrel changing handle was swapped for a folding unit. Certain parts were beveled or chamfered to prevent cutting soldiers' hands and arms. Other changes involved the bipod, pistol grip, flash suppressor, and sights. Over the years, additional modifications have been introduced as part of the Soldier Enhancement Program and Rapid Fielding Initiative.
The Hardballer derives its name from round-nose hardball G.I. ammunition (solid 230 grain Full Metal Jacketed bullets). This is the round the pistol was designed to shoot. The Hardballer series of pistols all share a brushed stainless steel finish and a wide target style trigger with adjustable trigger stop. The later Galena-made pistols have an elongated "beavertail" grip safety and a beveled magazine well.
The Midalja għall-Qadi tar-Repubblika is a five-pointed white enamel star wide with beveled rays between the arms of the star. The obverse bears the Coat of Arms of Malta on a gold colored metal disc superimposed over the star. The top point of the star bears the inscription 1975 in gold. The reverse depicts, in relief, a map of the Maltese Islands.
The Vinson House is a historic house at 1016 South Fourth Street in Rogers, Arkansas. It is a single-story brick structure with high-quality Stick/Eastlake styling. It has a generally cruciform plan with a cross-gable roof, with beveled corners topped by corbelled bracketing, and decorative Stick style woodwork in the gables. The front porch is supported by columns featuring elaborate scrollwork in the capitals.
Ancient Sumerian men and women were possibly the first to invent and wear lipstick, about 5,000 years ago. They crushed gemstones and used them to decorate their faces, mainly on the lips and around the eyes. Egyptians like Cleopatra crushed bugs (carmine) to create a color of red on their lips. Women in the ancient Indus Valley Civilization may have used rectangular pieces of ochre with beveled ends as lipstick.
Clapboards applied to framing without a layer of sheathing (sheeting). "Live edge" weather board siding and rare weatherboard roofing. Oil Creek State Park Adirondack Shelter Wood siding in overlapping horizontal rows or "courses" is called clapboard, weatherboard (British English), or bevel siding which is made with beveled boards, thin at the top edge and thick at the butt. In colonial North America, Eastern white pine was the most common material.
The Lanchester monobloc six-cylinder engine was retained from the Sporting Forty, it delivered a very useful and had many advanced features for the era, including dual ignition and full pressure lubrication. The transmission was via a very advanced pre-selective epicyclic gearbox. The Lanchester's turret was the standard Admiralty pattern as fitted to the Rolls- Royce, with beveled sides and mounting a single .303 Vickers machine gun.
Exposed plunging folded sedimentary and volcanic strata in Canada's Hudson Bay region outline the former position of the Belcher Mountains that stood in the late Precambrian. The folds trend northward. In the millions of years since, the mountains were uplifted and folded erosion has beveled them into a nearly flat plain. The lines running across the units are fractures and faults caused by the deformation of the units.
The front camera is a 5 MP lens with f/2.0. It has a "3D glass curvature back", while the frame is 7000 series aluminum with diamond cut beveled edges. The Nokia 7 comes in two colour options: Gloss Black and Matte White. Like other HMD Global smartphones, it retains the 3.5mm headphone jack, while also having 18W fast charging for its 3,000 mAh battery, through the USB-C port.
The cooled glass cane is cut into short segments which reveal a star pattern in cross-section. The segments may be beveled or ground, to reveal the characteristic chevron pattern from which the English name is derived. The chevron pattern becomes apparent after the beads' ends have been ground. Only rosetta/star beads with ground ends (either faceted, rounded, or chamfered), and with their inner layers exposed, are "chevron" beads.
Because beveled tooth structure is not parallel to the vertical axis of the tooth, it does not properly contribute to ferrule height; thus, a desire to bevel the crown margin by 1 mm would require an additional 1 mm of bone removal in the crown lengthening procedure.Fixed prosthodontic lecture series notes, Dr. Louis DiPede, New Jersey Dental School, 2004. Frequently, however, restorations are performed without such a bevel.
The Alden House is a historic house in a rural part of southern Bentonville, Arkansas. It stands in an agricultural area north and west of the community of Osage Mills. It is a 1-1/2 story wood frame structure, most notable for a single-story porch, which wraps around three sides of the house. The main entrance is located in the beveled northwest corner of the building.
The building is set back generously from the street, with some landscaping and hedges located in front. It is a one-story steel frame building on a raised foundation of poured concrete and sided in brick laid in English bond. The five-bay front facade is distinguished by a projecting three-bay central pavilion with a beveled-cornered hipped roof covered in slate. All other roofs are flat.
The short edges were cut straight with no holes or hooks. To achieve lengthwise interlocking, the mats were laid in a staggered pattern. The hooks were usually held in the slots by a steel clip that filled the part of the slot that is empty when the adjacent sheets are properly engaged. The holes were bent up at their edges so that the beveled edge stiffened the area around the hole.
The House at 305 E. Ashley in Siloam Springs, Arkansas is a high-quality local example of Queen Anne Victorian architecture. Built c. 1900, it is a two-story wood frame structure, with asymmetrical massing that includes beveled corners, projecting polygonal bay sections, and a pyramidal roof topped with a metal crest. It is finished in novelty siding, with pilastered corner boards, and has a wraparound porch with simple columns.
The jewel of the center wheel on the main plate is not required. By way of clarification, a friction bearing (jewel) cut with a olive profile is one where the inside surface is rounded or beveled at the top and bottom of the hole providing a reservoir for lubricating oil. ;Regulating Systems 3 The hairspring should be pinned in a grooved plate with a stud having a rounded collar and cap.
Roughly 75% of all ceramics found with Uruk culture sites are bevel-rimmed bowls, so two major aspects make them historically significant to archeologists. First, they are one of the earliest signs of mass production of a single product in history. Second, their suspected use as a form of payment to workers is a milestone in history because there is no evidence of rationed payments before beveled rim bowls.
Both the doors and windows have two rowlock brick arches over them. The car entrance is on the west side; a passage door is on the north side. A clear-glass window with 16 panes is on the east side. On the west side, north of the car entrance, is a window with beveled lead- glass panes, which appear clear from the outside but red from inside the building.
A two-story hyphen connects it to the wood frame Memorial Service Building, a one-story structure topped by a high hipped roof with broad overhanging eaves. On the north (front) facade, the original church has corner buttresses. The entrances are heavy wooden lancet arched doors with beveled leaded glass panels set in angled reveals. Colonettes at the outer edge gradually become convex moldings at the doors' edge.
The interior layout of both stories remains unchanged, as do many of the finishes. Both the adult rooms downstairs and the children's rooms upstairs have fireplaces with galzed brick, marbleized tile floors, carved mantels and beveled mirrors. The central stair has oak wainscoting, ash banisters, and newel posts topped with carved urns. The flooring, moldings and plaster walls are all original, as are the bookshelves and most other furniture.
Modern marching bands and drum corps use multi-tenors, which consist of several single-headed tom-toms played by a single drummer. The bottoms of the shells are open and beveled to project the sound of the drum forward. Double-ply PET film heads are typically used for increased sound projection and durability. They are typically played with wooden- or aluminum-shafted mallets that have disc-shaped heads made of nylon.
The John C. Motter House is a Queen Anne style house built circa 1880, located in Frederick, Maryland. The 3½ story house features beveled corners with brick corbels. The house was built in what was then a rural area beyond the north end of Frederick. The house is associated with Judge John C. Motter of the Maryland Sixth Judicial Circuit Court, who resided there from the 1880s to 1914.
The upper outer edges of the baulks were beveled at 45 degrees, and the rails fixed to the bevel surfaces so as to be angled out at the same inclination. The rails, baulks and track beam were fastened together with single bolts passing clear through. The gauge of the load-bearing rails was 22.5 inches (57 cm) between the outer edges. The support girders were not stayed, either.
The posterior angle is acute. The outer is lip decidedly curved backward anteriorly, very thick within but beveled to form a sharp edge. The columella is extremely short, somewhat reflected and connected posteriorly with the very strong parietal callus. This callus is fully as thick as the edge of the outer lip and connects with it at the posterior angle of the aperture, thus forming a complete periostracum.
Herbert A. and Bettie E. Cress House is a historic home located at Warrensburg, Johnson County, Missouri. It was built about 1888, and is a 1 1/2-story, Queen Anne / Shingle Style frame dwelling. The first-story walls are of weatherboard (beveled siding), and the second-story walls are of sawn shingles. It sits on a sandstone foundation and features a full-width front porch and second story porch.
A very large, single-bevel broadaxe A broadaxe is a large-(broad) headed axe. There are two categories of cutting edge on broadaxes, both are used for shaping logs by hewing. On one type, one side is flat and the other side beveled, a basilled edge, also called a side axe,Salaman, R. A.. Dictionary of tools used in the woodworking and allied trades, c. 1700-1970. New York: Scribner, 1975.
The Canadiana also had a cutout in the main deck to allow passengers to view the "workings" of the engine. The Canadiana was fitted with brass railings, red mahogany trim from Honduras and beveled mirrors. She was designed to be a premier vessel designed not only for transportation but also for pleasure. Originally intended to carry 3500 passengers, it was decided by the United States Coast Guard that 1800 was a safer number.
Belts for formal dress pants/attire are usually 28–32 mm wide (a little under 1 inch). These belts offer specialty accents such as trapunto straps, beveled edges, fine stitch gauge, and a tapered tip. The leather, if it is made of leather, is commonly in a semi or high-shine finish (ex: spazzalato leather), with a tight grain, and a smooth leather backing. Dress belts typically have a buckle in a polished metal finish.
The site covered roughly 40 hectares—the whole area of Tell Kuyunjik. The material remains of the period are very limited, but beveled rim bowls, an accounting bulla, and a numerical tablet characteristic of the Late Uruk period have been found.D. Collon and J. Reade, "Archaic Nineveh," Baghdader Mitteilungen 14 (1983) pp. 33–41; G. Algaze, "Habuba on the Tigris: Archaic Nineveh Reconsidered," Journal of Near Eastern Studies 45/2 (1986) pp.
The ground and first floor are separated by a beveled limestone belt course, above which are symmetrically arranged carved stone shields. The stairway was rebuilt in 1996 using the original limestone. The southwest façade features a large gable end with a three-tiered Gothic window framed in limestone. The window is flanked by two stone shields, and above it is a limestone band near the gable's peak in the shape of an "ɪ".
The Lee Weaver House is a historic house at the northwest corner of Main and Cope Streets in Hardy, Arkansas. Built 1924–26, this 1-1/2 story stone structure is a fine local example of the Bungalow style. It is fashioned out of native rough-cut stone, joined with beveled mortar. It has a side gable roof with a shallow pitch, and extended eaves with exposed rafter ends and knee braces.
Push-on joints, developed in the mid 1950s, allowed a quicker and relatively non-skilled method of jointing pipe. This joint consisted of a bell with a recessed groove which held a rubberized gasket. A lubricated beveled spigot section can be pushed into this joint with care, as not to roll the rubberized gasket, and once installed became watertight. This type of jointing system is popular today with ductile iron and Polyvinyl chloride (PVC) pipes.
531–532 Additionally, the 6 mm's special—and expensive—semi-rimless beveled-rim case was designed to work optimally in the charger clips of the M1895 rifle. This proved an unnecessary complication when adapting the cartridge to other, more modern machine guns and small arms. Aside from the benefits of interchangeability between the services, the board noted the government had its greatest investment in the .30 Army cartridge and rifles chambered for it.
The frame and slide are made of steel. The Custom utilizes a single full-length guide rod, necessitating the serrations on the front of the slide for press checks. Although the Custom is considered Kimber's base model, it has a number of features that were formerly found only on customized model 1911s, such as a lowered ejection port, custom trigger, beveled magazine well, extended thumb safety, and beavertail grip safety.Johnston, Gary Paul.
The parsonage, just south of the church, is a two-story frame house on slate foundation with a slate-shingled gabled roof. It is sided in clapboard, with pilasters at the corners and the center of the main block, supporting a plain frieze and box cornice. The main block is flanked by two smaller wings with a smaller kitchen block attached to the rear. In the front door there is a beveled, recessed glass pane.
Parkes, p. 78 The gun turrets, designed by Captain Coles of the Royal Navy, sat on circular turntables that were built on an iron radial platform with arms that rested on beveled wheels in diameter. Each turret required a crew of 18 men to rotate them via a system of rack and pinion gears; one minute was required for a full 360° rotation. They could be rotated from inside the turret as well from outside.
It takes a bit of practice to turn the burr correctly and then the scraper must be presented to the work in the correct fashion. Also, due to the friction created in use, the card scraper can become hot enough to burn fingers. Some woodworkers use the term "cabinet scraper" instead of "card scraper" for this tool. A separate tool, also called a cabinet scraper, differs in having a beveled edge like a plane.
The Kelly was sleeker and lighter, with basically the same shape but with beveled edges. High-end guitar company Alembic Inc produced the Exploiter bass guitars for the late John Entwistle of the Who. These basses had the body shape of the Explorer with either a cone- or V-shaped headstock. The Exploiter is different in that the edges are rounded over and the lower bout cuts more deeply into the body than an Explorer.
Châtelet's line 14 station, opened in 1998. Note the platform screen doors, subtle lighting, and radical departure from the beveled white tile used throughout the rest of the system. A case apart, the new line 14 (originally known as Météor, or Métro Est-Ouest Rapide) represented a blank slate for station decoration. Following the logic of the stations' capacious volumes, the RATP opted for minimalism, with an emphasis on space, light and modernity.
The fine craftsmanship can be seen in its parquet floors, built-in furniture, and stained-glass windows. The lava rock used for the foundation, support piers, and texture in the stucco also show commitment to the use of local materials. However, the leaded glass for the windows and the glazed brick for the fireplace both came from Australia, and the beveled glass in the bifold doors to the lānais came from France.
Cedar Mesa Sandstone forms the Druid Arch, in Canyonlands National Park These deeply-formed rocks were uplifted, eroded, and exposed for eons. By 600 million years ago, North America had been beveled off to a remarkably smooth surface. It is on this crystalline rock surface that the younger, more familiar layered rocks of the Colorado Plateau were deposited. Throughout the Paleozoic Era, the Colorado Plateau region was periodically inundated by tropical seas.
Keith-Style SWC with one crimping groove and one filled lubrication groove. In practice, the bullet can be crimped over the leading band, or on the crimping groove, as desired.A variety of wadcutter types exist: HBWC (Hollow Base Wadcutter), DEWC (Double-ended wadcutters), BBWC (Beveled-Base Wadcutters), and SWC (Semi-Wadcutters). HBWC rounds are best used at only the lowest velocities, as by being hollow at the rear end, they can split under heavy loads.
Mesh detail appeared just beneath the palm and inside the three recessed louver-like shapes located on both topside. The blades on the sides of Batman's gauntlets were retractable and capable of firing outward projectiles. The utility belt was a convex metal ampules form, and its buckle was made of beveled metal platelets. The back of the belt had an intricate containment device and could be detached to be used as a tool.
A baseboard of verd antique and a gray marble dado rail completed the wainscot, and a gilt plaster acanthus crown molding decorated the ceiling. Arches in the north wall gave access to meeting rooms. The arches leading to the Grand Ballroom, Chinese Room, and the original Presidential Room were topped with sculpted architraves of white Alabama marble, while the other arches were each topped by a gilt plaster crest. Beveled mirrors stood between the pilasters.
The Dilley House is a former historic house at 656 Laurel Street in Pine Bluff, Arkansas. It is a two-story wood frame structure, finished in beveled weatherboard siding, and capped by a hip roof. It has an irregular plan, with a stepped series of projections on the front right side giving it a roughly triangular shape. The main entrance is set in the second projecting, under a porch with a gabled roof.
In detail, the front section reveals signs of having been added after the original construction. The side windows that were the two original entrances in 1870 now appear to have been pushed back from the face of the stonework and the corners are beveled. Internally, the building has a gallery at the rear of the building. The original plan featured galleries on both sides, but they proved too hot during the summer.
The case was settled in March 1997 for undisclosed terms. NBC Sports first switched to digital on-screen graphics in 1995, although in a very limited, text-based form. A modernized graphics package for the telecasts rolled out in 1999, based around translucent black rectangles, with beveled gold bars at the top and bottom, with blue accents for most sports (green for golf, purple for Wimbledon, and orange for the tennis French Open).
The main entrance, at the north end of the main block's east face, is a 2½-inch-thick () recessed panel wooden door with a ceramic knob. It is flanked by sidelights and pilasters, with a transom atop. It opens into a foyer floored in random-width red pine with beveled-edge baseboard topped by a curved molding on the walls. The doors from it have wide wooden trim and an ogee-topped architrave.
The stone tools (or "lithics") at Pulltrouser Swamp suggest that their use was during occupation of the site from the Late Preclassic to Late Classic Period (see Mesoamerican chronology). The tools found at the site were mostly for agricultural use or manufacturing agricultural products. There is little evidence that any of the tools were manufactured at the site. The types of tools found consisted of oval bifaces, trunchet bits, celts, picks, beveled bits, blades, and hammers stones.
The Queen Anne Style brick residence was designed by Frank Thayer for Lorin P. Cray, a civic leader, judge and philanthropist. Built in 1897 at a cost of $13,000, the house is constructed of buff brick, red brick, pink granite and Kasota limestone. It features towers, porch, columns, side balcony and stained, etched and beveled glass windows typical of the period. The property once included a carriage house, which was demolished to make room for a YWCA annex.
Wedges when hammered were used to split cedar logs into planks. A variety of woods including yew, spruce, maple, and crabapple were used as wedges. The wood was beveled on one end to allow it to be driven into the cedar, and then scorched to improve its hardness. Animal fat was rubbed into the wood to prevent warping, and a cedar with was twisted around the top end to prevent splitting when struck with a hammer.
The driver's hatch was on the left side of the hull roof. The tank had an improved hull design, longer and wider than the T-34 but slightly lower thanks to the relocation of the air filter, with thicker armour, and was simpler to construct. The hull had a sloped glacis plate, vertical sides, and a slightly beveled rear. Most tanks had a splashboard on the glacis plate although there are pictures of T-44A tanks without them.
The volume was moved to the surface of the pickguard. On all variants the pickguard is a three-ply black/white/black beveled pickguard. Finally, instead of having the Gibson logo and crown inlaid on the headstock, a gold Gibson logo was stenciled with Herb Ellis' signature stenciled below it. The reason for putting the signature on the headstock instead of the trussrod cover was that Herb Ellis often removed the cover to install a Van Eps String Damper .
Inside, the front entrance, offset slightly to the east, has a screen door and a beveled-glass front door. The entrance leads into a first floor, which is divided into four large spaces: a front hall with a staircase, living room, dining room, and kitchen. A Tuscan order columned archway leads into the living room from the hall. Double French doors separate the living room from the dining room, which has a bay window on the western wall.
Blunt force trauma is seen as the most common form of trauma. It results in abrasions, bone fractures, lacerations, or contusions. An example of this type of trauma is falling from a high elevation. Sharp force trauma is “a narrowly focused, dynamic, slow-loaded, compressive force with a sharp object that produces damage to hard tissue in the form of an incision.” This can involve a variety of weapons or tools, like knives, that have beveled edge.
A thinner edge reduces light entering into the edge, reducing an additional source of internal reflections. Extremely thick lenses for myopia can be beveled to reduce flaring out of the very thick edge. Thick myopic lenses are not usually mounted in wire frames, because the thin wire contrasts against the thick lens, to make its thickness much more obvious to others. Index can improve the lens thinness, but at a point, no more improvement will be realized.
The Jones House is a historic house at 220 Bush Street in Sulphur Springs, Benton County, Arkansas. It is a 2-1/2 story wood frame structure with a T shape and cross gable roof. The front facade, one of the ends of the crosspiece of the T, has beveled corners with the roof overhanging above the second floor, an Eastlake element. A porch wraps around the stem of the T, which extends to the south.
The M9 was updated to the M9A1 in 2006. It added—among other things—a one-slot Picatinny rail for mounting lights, lasers, and other accessories to the weapon. The M9A1 has more aggressive front and backstrap checkering and a beveled magazine well for easier reloading of the weapon. M9A1 pistols are sold with Physical Vapor Deposition (PVD) coated magazines developed to better withstand the conditions in the sandy environments in the Iraq and Afghanistan wars.
The First United Building was designed by Ar. Andres P. Luna with a rectangular plan. On the main facade is a central tower flanked by two chamfered corner towers on both ends of the building. The three towers have the same ornamental treatments of thin cylindrical moldings running up to the square plates and continued by beveled arches that relate to the windows at the sixth floor. There are octagonal windows flanked by stout finials above the arches.
By 1983, Accords sold in the eastern United States were produced at the new Marysville plant, with quality considered equal to those produced in Japan. In June 1983, for the 1984 model year, the Accord body was restyled with a slightly downward beveled nose and a new series of 12-valve CVCC powerplants.Automobile Guide Book 1983-84, p. 159 Globally there was a 1.6 (EY) and also the slightly more powerful ES2 , yielding in federal trim.
The first edition (CKS-1) appears in the early 1930s with a two-lens turret. The flat (planar) shape of the turret limited the types of lenses that could be mounted - long lenses would physically and optically interfere with the taking lens. The post-war innovation of the Cine Special II (CKS-II) beveled the turret face so the lens mounts were not parallel . Kodak also made a military version with black, non-reflective metal instead of chrome.
The three guests elevators, in operation since 1969 replaced the original elevators that were installed in 1924. The original bath house elevator – lined with beveled glass and shining brass still exists and still manually operates. The Arlington Hotel has a history of luxury and class, a prime example of all the vast celebrities that have come to it. it was even referred to as “the most elegant and complete hotel in America” in Charles Cutter's 1892 Guide Book.
The large, white, shining shell is similar in form to Odostomia (Amaura) avellana. It measures 9.6 mm and is one of the larger species within this genus. The three whorls of the protoconch are helicoid, quite elevated, deeply immersed in the first of the succeeding whorls, having their axis at a right angle to the axis of the later whorls. The six whorls of the teleoconch are well rounded, with a beveled shoulder at the summits.
Hurstville is a historic plantation house located at Kilmarnock, Northumberland County, Virginia. It was built about 1777, and is a 1 1/2-story, three-bay, double pile brick dwelling with a steep gable roof. It measures 28 feet by 30 feet, and features exterior end chimneys with two sets of tiled weatherings and a beveled water table. Also on the property are the contributing Ball family cemetery and the site of the Cress Field dwelling.
The station is a prefabricated building > consisting of galvanized steel panels on a frame of steel girders. The > design reflects the Modern Movement, showing elements of the Streamline > Moderne and International styles. Character-defining elements include the > building's strong horizontal emphasis, smooth wall surface, flat roof with > beveled coping at the roofline, extensive glazing, elongated canopy, minimal > decoration, and streamlines on the canopy columns and entry surround. The > station was originally erected in Phoenix circa 1936.
The building was designed by William E. Burk, Jr., who also designed the Park Plaza Condominiums. It has twelve floors of office space above a wider six-story base which incorporates a parking garage on floors 2–6. The exterior walls of the parking levels are molded concrete with an open grillwork pattern of stylized quatrefoils inspired by Moorish architecture. The upper floors have recessed rectangular windows arranged in a simple grid pattern with beveled surrounds.
The LRV design is a one-way eight-axle motorized car consisting of three articulations, which are connected to each other by the joint and the cover. Each rail car is provided with five double leaf, electronically- operated plug-sliding doors. The three center doors have an open width of 1,255 mm, while the two end doors measures at 861 mm. Unlike the prototype 0029, these cars have rounded "foreheads" or beveled large windows at both ends.
These vessels have no tops, which makes harvesting top-fermenting yeasts very easy. The open tops of the vessels make the risk of infection greater, but with proper cleaning procedures and careful protocol about who enters fermentation chambers, the risk can be well controlled. Fermentation tanks are typically made of stainless steel. If they are simple cylindrical tanks with beveled ends, they are arranged vertically, as opposed to conditioning tanks which are usually laid out horizontally.
They were known for being cleaner and fancier than other such places. The interiors featured red and gold carpeting, velveteen fixtures, beveled glass, mirror walls, chandeliers, oil paintings, murals, and merchandise bearing the Pussycat logo. Some Pussycat theaters sold popcorn from the box office to pedestrians on the sidewalk, with no obligation to buy a ticket. Vince Miranda and George Tate (who were lovers) shared ownership of Walnut Properties, the company that owned the Pussycat Theaters.
The J.M. Johnson House in Boise, Idaho, is a -story Queen Anne house designed by John E. Tourtellotte and constructed in 1898. The house includes a sandstone foundation and features a Tuscan column porch with a prominent, corner entry at 10th and Franklin Streets. A side gable with a shingled dimple window above a prominent beveled window bay are central to the Franklin Street exposure. The house was added to the National Register of Historic Places in 1982.
Headrick later helped to develop the sport of disc golf, which was first played with Frisbees and later with more aerodynamic beveled-rim discs, by inventing standardized targets called "pole holes." When Headrick died, he was cremated, and his ashes were molded into memorial discs and given to family and close friends and sold to benefit The Ed Headrick Memorial Museum.Steady Ed Memorial Discs Disc Golf Association The Frisbee was inducted into the National Toy Hall of Fame in 1998.
The stations of the two lines are of a standard configuration: they include two platforms flanking two tracks under an elliptical vault. However, the Line 4 station also has a later extension, recognizable by its much higher ceiling and mezzanine. The platforms of Line 5 are decorated in the Andreu-Motte style: the fittings are orange, but the tiles are white and beveled. The advertising frames are metallic and the name of the station is indicated on enamelled plates, in Parisine font.
Variants of casement windows are still the norm in many European countries. They are sometimes opened with a crank, lever, or cam handle, which is placed around hand height or at the bottom and serves as a window lock. A crank, stay, or friction hinge is necessary when the window opens outward, to hold the window in position despite wind. Often the glass panes are set in a rabbeted frame and sealed with beveled putty or glazing compound to secure the glass.
A picture (a photo or print, drawing, etc.) is placed beneath it, with the cutout framing it. The passe-partout serves two purposes: first, to prevent the image from touching the glass, and second, to frame the image and enhance its visual appeal. The cutout in the passe-partout is usually beveled to avoid casting shadows on the picture. The French word may also be used for the tape used to stick the back of the picture to its frame.
Escher learned his wood engraving technique from Samuel Jessurun de Mesquita. He illustrated the octahedral compound of Stars in the beveled wire-frame style that had been used by Leonardo da Vinci in his illustrations for Luca Pacioli's 1509 book, De divina proportione. Coxeter's analysis of Stars is on pp. 61–62. The stella octangula (Latin for "eight- pointed star") in the upper right of Stars was first described by Pacioli, and later rediscovered by Kepler, who gave it its astronomical name.
The shiro- shoin at Nishi Hongan-ji The main reception room is characterized by specific features: a recessed alcove (tokonoma); staggered shelves; built-in desks; and ornate sliding doors. Generally the reception room is covered with wall-to- wall tatami, has square beveled pillars, a coved or coffered ceiling, and . The entrance hall (genkan) emerged as an element of residential architecture during the Momoyama period. The oldest extant shoin style building is the Tōgu-dō at Ginkaku-ji dating from 1485.
A fuller is a rounded or beveled longitudinal groove or slot along the flat side of a blade (e.g. a sword, knife, or bayonet) that is made using a blacksmithing tool called a spring swage or, like the groove, a fuller. A fuller is often used to lighten the blade. When combined with proper distal tapers, heat treatment and blade tempering, a fullered blade can be 20% to 35% lighter than a non-fullered blade with minimal sacrifice of strength or blade integrity.
While transom windows generally do not have any privacy concerns associated with them because of their height, sidelights usually need to be covered to ensure privacy. Any number of window treatments can be employed to enhance privacy in doorways with sidelights. Miniblinds, micro-miniblinds, and shirred curtains are among the window treatments that offer an increased level of privacy. Another choice is stained or beveled glass, which can offer some privacy while also contributing to the overall beauty of a building's design.
Closures must be applied tight enough to maintain a seal and to resist closure back-off, but must not be applied so tightly that the end user cannot remove the closure. They are often found on top of beers, such as Coors or Bud Light. Screw caps were originally an internal thread design. A glass bottle/jar with an internal screw-thread immediately below a gasket-seat, having a beveled seat, was patented by Hyman (Himan) Frank of the William Frank & Sons, Inc.
Engineer Dave said it was "a real OS that could demonstrate the core technology" much deeper than System 6 could do. In the early 1990s, Pink's graphical user interface (GUI) was based on a faux 3D motif of isometric icons, beveled edges, non-rectangular windows, and drop shadows. One designer said "The large UI team included interaction and visual designers, and usability specialists." That essential visual design language would be an influence for several years into Copland, Mac OS 8, and CommonPoint.
The President's House is a 17-room Victorian mansion where the College President resides. It was built in 1892 by the Duncan family, of Duncan glass fame. Its design is archetypical Queen Anne Victorian style, with ornate "gingerbread" details, stained and beveled glass, recessed doors and windows, and louvered wooden shutters. In 1944, Walter Hudson Baker, class of 1907, donated the house to the college in memory of his wife, Amy Duncan Baker; it has been used as the President's House since.
If we could strip away all of the younger rocks deposited on top of buried Precambrian basement, you would see a landscape of low relief. The topography of the Precambrian rocks is very subdued, with barely 500 feet difference between the highest point and the lowest. Clearly, this region was exposed to a very long period of erosion in the very distant past which beveled the original mountainous surface to a gently undulating surface. The present surface is not much different.
The eastern facade on Union Square West contains three vertical architectural bays. A curved, slightly projecting portico supported by two Ionic columns takes up the two base stories, and a carved plaque reading "Bank of the Metropolis" is located at the top of the portico. On either side of the portico are several rows of beveled masonry blocks. The southern facade on 16th Street contains 18 bays, split up into sections of 3, 3, 9, and 3 bays from west to east.
They believe that the bones of the skull move in a rhythmic pattern which they can detect and correct. Cranial osteopathy, a forerunner of CST, was originated by osteopath William Sutherland (1873–1954) in 1898–1900. While looking at a disarticulated skull, Sutherland was struck by the idea that the cranial sutures of the temporal bones where they meet the parietal bones were "beveled, like the gills of a fish, indicating articular mobility for a respiratory mechanism." John Upledger devised CST.
The main entrance to the dining room is the pair of pocket doors at the east end of the center hall. It has diagonal maple-strip flooring and an oak and glass china cupboard. The south wall has an exterior door of oak paneling with a beveled glass window, flanked by two large windows with raised panels below. Another door leads into the kitchen wing, which includes a full bathroom and pantry, the latter now used as a laundry room.
Floors were made with various width select dressed boards that measured up to fourteen inches wide in some rooms. Interior walls were veiled with approximate 12 inch wide dressed horizontal planks. The twelve feet high ceilings were covered with the same type materials as the walls except the edges were beveled on the sides of each plank to give a "V" groove appearance when the planks joined. The high ceilings provided essential relief against the sweltering Jones County summer heat.
Doctor blades had predominantly been made of steel, but advanced doctor blades are now made of polymer materials with several different types of beveled edges. 4\. Plate cylinder The plate cylinder holds the printing plate, which is made from a soft flexible rubber-like material. Tape, magnets, tension straps and/or ratchets hold the printing plate against the plate cylinder. 5\. Impression cylinder The impression cylinder applies pressure to the plate cylinder where the image is transferred to the image-receiving substrate.
This unique feature of the Pelplin Bible enabled scholars to deduce the shape of Gutenberg's type. The binding consists of two beveled oak boards covered in red goat leather, with five brass buttons, corner fittings and buckles fastened to leather straps. The Bible from Pelplin was rescued during World War II by the Polish government, and came to Canada through Paris and London. Kept in a vault at the Bank of Montreal in Ottawa, it was not returned to Poland until 1959.
254 Canal Street, built by Bruce for his business In 1812, David went to England, and brought back with him the secret of stereotyping. The brothers attempted to introduce the process, but encountered many difficulties, which it required ingenuity to surmount. The type of that day was cast with so low a beveled shoulder that it was not suitable for stereotyping, as it interfered with the molding and weakened the plate. They found it necessary, therefore, to cast their own type.
January 2014 The Northeast Entrance Station spans the center of the road into the park from Cooke City. A central block housing the office and two checking windows is flanked by smaller blocks, each housing a checking window and joined to the main block by a long gabled roof that spans the ensemble. Each block is marked by a cross gable proportional to the block's size. The walls are lodgepole pine logs cut within the park with saddle- jointed corner, randomly beveled.
The genus Acanthoteuthis was founded by R. Wagner and G. Munster for belemnoids, found in the Solnhofen limestone of Bavaria, which have small hooklets on their arms, sometimes associated with more or less complete remains of the animal.G.C.Crick et al.On an Example of Acanthoteuthis ferussaci, Munst. from the Lithographic stone of Solenhofen, Bavaria,... Proceedings of the Malacological Socieity,Vol III Part 1,April,1898 The hooklets are typically compressed and may be beveled on either or both margins on one side.
The design, developed by Shimano, improves on their earlier Uniglide design (which used beveled/twisted gear teeth instead of ramps), and was introduced as part of a commercially viable index shifting system. The Hyperglide ramps, along with laterally floating derailleur jockey wheels, allows for enough "slop" in the system to make indexed shifting reliable, despite variations in shift cable adjustment and manufacturing or assembly tolerances. A Hyperglide freewheel or cassette on a bike with friction shifters can further improve shifting.
Doylestown, Pa.: Horizon Press, published for the Bucks County Historical Society, 1975. 81. On the other type, both sides are beveled, sometimes called a double bevel axe, which produces a scalloped cut. On the basilled broadaxe the handle may curve away from the flat side to allow an optimal stance by the hewer in relation to the hewn surface. The flat blade is to make the flat surface but can only be worked from one direction and are right-handed or left-handed.
Nova Štifta is best known for its pilgrimage church dedicated to the Assumption of Mary. It is a Baroque church with an exterior arcade. It was built between 1641 and 1671Slovenian Ministry of Culture register of national heritage reference number ešd 490 and was commissioned by the Jurij Khisl, lord of the castle in Ribnica, after a mysterious light appeared at Juniper Hill (Brinov vrh, ), as the site is known. The church has an octagonal nave and a smaller square chancel with beveled corners.
Seen in cross section, the blade would form a long, thin triangle, or where the taper does not extend to the back of the blade, a long thin rectangle with one peaked side. Hollow ground blades have concave, beveled edges. The resulting blade has a thinner edge, so it may have better cutting ability for shallow cuts, but it is lighter and less durable than flat ground blades and will tend to bind in deep cuts. Serrated blade knives have a wavy, scalloped or saw-like blade.
Single butt welds are similar to a bevel joint, but instead of only one side having the bevelled edge, both sides of the weld joint are beveled. In thick metals, and when welding can be performed from both sides of the work piece, a double-V joint is used. When welding thicker metals, a double-V joint requires less filler material because there are two narrower V-joints compared to a wider single-V joint. Also the double-V joint helps compensate for warping forces.
The reference flat is slightly beveled (only a fraction of a degree of beveling is necessary) to prevent the rear surface of the flat from producing interference fringes. A collimated beam of monochromatic light illuminates the two flats, and a beam splitter allows the fringes to be viewed on-axis. The reference piece is sometimes realized by a diffractive optical element (computer-generated hologram or CGH), as this can be manufactured by high accuracy lithographic methods. Fig. 2 illustrates the use of CGHs in testing.
Swage blocks are often anvil-like blocks with various shapes forged in them, also for forming metal. The term "swage" is from the Old French "souage", meaning "decorative groove" or "ornamental moulding". Fullers, in particular, are swages that have a cylindrical or beveled face, typically three to six inches long, which are used for imprinting grooves into the steel. If a groove is to be applied to both sides of the steel, two fullers may be used at the same time, sandwiching the workpiece in the middle.
While there, he witnessed a deception during an unexpected visit by Lavrentiy Beria, the feared head of Soviet security and the politician in charge of the nuclear program under Stalin. Kurchatov was in the middle of querying the beveled edge on a plutonium hemisphere, when – reacting quickly before Beria and his entourage – he directed Yakov Zel'dovich to double-check the calculations, which Zel'dovich 'confirmed' to Kurchatov's satisfaction shortly afterwards. Kurchatov put Davidenko in charge of one of three teams working simultaneously on neutron primers for nuclear bombs.
Its design is Italianate with a single story wing on the north (rear) side. There is a hip roof on the main section capped by a widow's walk with a wrought iron fence around its perimeter. A gable is centered on a short extension of the center, front wall which has a limestone block with beveled corners set in its center above the second story windows that is inscribed with the date 1879. There is a black, cast, spread eagle below the inscribed stone.
Her height was 1.58 meters from the vertex to the heel. The skull cavity contains only the shrunken and desiccated brain and dura mater of the woman; there is no evidence of embalming material within the cranial cavity. There is an oval defect in the front of the skull; this hole has sharp, beveled, and festooned edges. The lack of evidence for attempted healing or sclerosis indicate that the defect was caused by a postmortem alteration of the body, probably during the embalming process.
The Grand Rapids and Indiana Railroad Harbor Springs Depot is a single-story, ell-shaped Stick style/Eastlake building with a hipped roof. It consists of two parts: a long passenger wing with wide projecting eaves and a shorter baggage portion, with narrower overhangs, situated at right angles to the main section. The dominant architectural features of the building are the oversized, curving brackets supporting the wide eaves on the passenger wing. The building is clad with beveled clapboard, and contains double-hung windows and paneled doors.
The W New York Union Square building facade is composed mostly of gray Concord granite interspersed with brick, except for the red Numidian- granite water table, and the red Spanish-tile mansard roof. The foundation walls are made of brick, mortar, and cement. On all floors, there are eight architectural bays, three facing Park Avenue to the west and five facing 17th Street to the south. The ground floor facade is rusticated with several rows of beveled masonry blocks, and deep crevices between each row of blocks.
At the main entrance, an oak paneled door with original beveled glass opens into a wide center hallway, floored in wide oak strips, with a large oak staircase. A paneled door on the north leads to a small parlor, with large double pocket doors leading to a larger parlor and another small single pocket door opening into a large mourning room. In both of these rooms the oak strips on the floor are arranged in a pattern of concentric rectangles. A double pocket door separates them.
An early Fender Precision Bass In the 1950s, Leo Fender and George Fullerton developed the first mass-produced electric bass guitar. The Fender Electric Instrument Manufacturing Company began producing the Precision Bass, or P-Bass, in October 1951. The design featured a simple uncontoured "slab" body design and a single coil pickup similar to that of a Telecaster. By 1957 the Precision more closely resembled the Fender Stratocaster with the body edges beveled for comfort, and the pickup was changed to a split coil design.
The granite structure is supported on a four-step octagonal base with lip, from which rises an octagonal column on square, beveled base, with an iron ring half-way up its height. The capital is decorated with subsectional ring and topped by a cage, with the lower part in shape of an inverted and truncated pyramid with rings. The hat-shaped inverted octagonal pyramid, with the base decorated with incised rings and crowned by armillary sphere. The base and the capital decorated by rings and half spheres.
Blade cross-sections for typical grinds # Hollow grind — a knife blade ground to create a characteristic concave, beveled cutting edge. This is characteristic of straight razors, used for shaving, and yields a very sharp but weak edge, which requires stropping for maintenance. # Flat grind — The blade tapers all the way from the spine to the edge from both sides. A lot of metal is removed from the blade, so it is thus more difficult to grind, which is one factor that limits its commercial use.
Commercial models experience difficulties feeding some brands of hollowpoint ammunition, and unsurprisingly, best reliability is achieved with NATO specification ball ammunition. The Llama M-87 was introduced in 1986. This was a high-grade competition pistol based on M-82 with extended barrel, compensator, muzzle weight, target sights, target trigger, additional manual safety, extended magazine release, extended safety levers, beveled magazine well, and two-tone finish (chrome with blued slide). Despite the high price, (Retail $US1,450) the M-87 was greeted with excellent reviews on release.
A 1945 Federal Telephone & Radio Type 803, a clone of the 302 using Automatic Electric components for military applications Other manufacturers produced sets of similar appearance. Among these were the Stromberg-Carlson Model 1243 telephone, distinguished by beveled corners and flanging on the handset, and the Federal Telephone & Radio (FTR) 803 (pictured). After phase-out in the US, the model 302's exterior design was retained by European Bell branch companies for such models as the 1954 Bell Standard, widely used in the Netherlands and Belgium.
From November 1984 to June 1987 the DeKalb County Courthouse underwent an interior restoration, which was completed in time for the sesquicentennial celebration for DeKalb County. The restoration, at an approximate cost of $100,000, was undertaken by Conrad Schmitt Studios of New Berlin, Wisconsin. The modern front doors to the courthouse hide the original, beveled glass front doors from view. Once inside the modern doors, the nonfunctional original doors can be seen, standing wide open, to be admired; each door weighs several hundred pounds.
500px The modern SRP has two tungsten carbide probe tips placed about 20 um apart. Each tip is mounted on a kinematic bearing to minimize "scrubbing". The probes are lowered very gently onto a beveled piece of silicon or germanium. Although the loading of the probe tips may be as little as 2 g., the pressure is in excess of one million pounds per sq inch (or ~ 10G pascals) causing a localized phase transformation in the silicon to “beta-tin” producing a nearly ohmic contact.
Chief among these is the ornamentation on the porch roofs: they include gabled rooflines and beveled corners supported by multiple spindles. Connecting these porch roofs are low normal roofs, which primarily protect the recessed entrances to the houses. Elsewhere, the houses feature double-hung windows, imbricated shingles on the gables, and arcades of Gothic Revival panelling, and numerous ornamental circles inscribed within squares. Taken as a single building, the rowhouse measures two bays wide and eighteen bays long; it is of frame construction and two stories tall.
On the south is a square parlor with two windows on the south and east walls, all with recessed panels on either side and below. They are bordered by paneled pilasters on plinth blocks with beveled tops. A door on the south opens into a small office with a treatment similar to the foyer. The north parlor, occupying the wing on that side, has similar treatments as well but their size varies with each window and door, reflecting its origins as three separate rooms combined into one.
The platforms of the two lines, established on a curve, each with two platforms separated by the tracks of the metro and the roof is elliptic. The platforms of Line 6 are arranged in the Andreu-Motte style with two orange luminous railing, benches, tympanums and outlets of the flat brown tile corridors and Motte orange seats. It is therefore one of the few stations still presenting the Andreu-Motte style in its entirety. This arrangement is paired with the white beveled ceramic tiles, which cover the walls and the vault.
200px Side views of a bevel (above) and a chamfer (below) A bevelled edge (UK) or beveled edge (US) is an edge of a structure that is not perpendicular to the faces of the piece. The words bevel and chamfer overlap in usage; in general usage they are often interchanged, while in technical usage they may sometimes be differentiated as shown in the image at right. A bevel is typically used to soften the edge of a piece for the sake of safety, wear resistance, or aesthetics; or to facilitate mating with another piece.
Side view of a beam with two weld access holes cut into the web. Also the flanges have been beveled in preparation for welding. The weld access hole or rat hole is a structural engineering technique in which a part of the web of an I-beam or T-beam is cut out at the end or ends of the beam. The hole in the web allows a welder to weld the flange to another part of the structure with a continuous weld the full width on both top and bottom sides of the flange.
Behind this platform was an inclined frontal sheet of the hull, behind which was the fighting compartment. The latter had no roof. The aft of the hull had a characteristic beveled shape. Due to the use of several interesting layout solutions, the KSP-76 self-propelled gun hull had an acceptable level of protection, but its weight did not exceed 1140 kg. A 76 mm ZiS-3 gun was located in the front of the machine on a machine that allowed it to be guided in two planes.
A seventh dome is located in the normal position for a Romanesque dome on squinches: over the crossing. Other examples of this use over naves are rare and scattered. One is the large church of Saint Hilaire at Poitiers, which seems to have been influenced by Le Puy Cathedral. In 1130, its wide nave was narrowed with additional piers to form suitable square bays, which were vaulted with octagonal domes whose corner sides over trumpet squinches were so narrow that the domes resemble square cloister vaults with beveled corners.
Langham Place, in Hong Kong.Sylvia Hui, 'Happy Man' to greet new Mong Kok mall shoppers , The Standard, 20 October 2004 Bell continues his work with the cube to this day; more recent ones are made only of glass and have beveled edges, as opposed to plates that sit within a metal frame. The glass is typically covered with a film that has been treated using a technique called thin film deposition of metallic particles. This process takes place in a vacuum chamber, and involves vaporizing metal alloys that then settle on the glass surface.
Although the columns themselves were lightweight, they were spaced closely together, forming a strong, rigid wall structure. There were 59 perimeter columns, narrowly spaced, on each side of the buildings. In all, the perimeter walls of the towers were on each side, and the corners were beveled. The perimeter columns were designed to provide support for virtually all lateral loads (such as wind loads) and to share the gravity loads with the core columns. Structural analysis of major portions of the World Trade Center were computed on an IBM 1620.
The Joseph Chitwood House in Boise, Idaho, is a 2-story, vernacular Queen Anne house constructed by Joseph Chitwood in 1892. The house has been modified by a series of small expansions since its construction, and its original T-shape design is irregular. A prominent, beveled bay protrudes toward the Denver Street exposure, and a hip roof porch at left of the bay provides a sheltered entry. Front and side gables above the second floor are covered by a tent roof, with 1-story, hip roof additions toward the back of the house.
As the Taconic Orogeny subsided in Early Silurian time, uplifts and folds in the Hudson Valley region were beveled by erosion. Upon this surface sediments began to accumulate, derived from remaining uplifts in the New England region. The evidence for this is the Silurian Shawangunk Conglomerate, a massive, ridge- forming quartz sandstone and conglomerate formation, which rests unconformably on a surface of older gently- to steeply-dipping pre-Silurian age strata throughout the region. This ridge of Shawangunk Conglomerate extends southward from the Hudson Valley along the eastern front of the Catskills.
This decoration is married with the white beveled tiling which covers the pillars, vault and the outlets of the corridors. The name of the station is inscribed in faience in the original CMP style. The advertising frames are special: in brown faience and with simple patterns, they are surmounted by the letter M. These same frames are only present in seven other Paris metro stations. The platforms of Line 7 are laid out in the Ouï-dire style blue colour: the two lighting strips, of the same color, are supported by curved shaped false consoles.
Hoche is a standard configuration station with two platforms separated by subway tracks under an elliptical vault. It has white and rounded lighting bands in the Gaudin style of the metro revival of the 2000s and white beveled ceramic tiles cover the walls, vault, tympan's and outlets of the corridors.The platforms are equipped with benches made of slats and the name of the station is inscribed in faience, in the style of the original CMP. It is therefore decorated in a style identical to that applied to the majority of Paris metro stations.
It was placed on the National Register of Historic Places in March, 1999. The administrative offices of Indian Springs State Park have been in Idlewilde since March 1995. The park includes waters considered medicinal by Native Americans, giving the park its name, stone buildings and walls built by President Franklin D. Roosevelt's CCC work crews during the Great Depression, and history of the resort hotels of the area from the early 20th Century. The offices are well preserved and include pine floors, beveled glass windows, and a striking staircase.
The enamel margin of a composite resin preparation should be beveled in order to improve the appearance and expose the ends of the enamel rods for acid attack. The correct technique of enamel etching prior to placement of a composite resin restoration includes etching with 30%-50% phosphoric acid and rinsing thoroughly with water and drying with air only. In preparing a cavity for restoration with composite resin combined with an acid etch technique, all enamel cavosurface angles should be obtuse angles. Contraindications for composite include varnish and zinc oxide-eugenol.
The house combines elements of vernacular architecture and eclecticism. The generous interior woodwork and fir floors indicate the importance of the local lumber industry. The interior, however, also contains many design influences from the early twentieth century, such as classical revival columns, American Craftsman-style trim and moldings along with beveled and stained glass windows, while the exterior is loaded with ornate brackets, turrets and balconies. The house contains fanciful elements in addition to large overhanging eaves: a flared cupola resting on the front roof somewhat resembles the Zytglogge clock tower in Bern, Switzerland.
The camp was built of logs felled on the property, and all iron hardware was forged on site. In the main lodge and dining hall, the log construction was unusual in that the logs were not interlocked, as in conventional log buildings, but rather were pinned together at beveled corners. The scale is massive: the dining hall is , the walls high at the eves with a cathedral ceiling high at the ridge, with a huge fireplace on one side. Floors, walls and ceilings were all of polished planks and peeled and polished natural logs.
They shot all kinds of material in the street and in a studio, used Murphy's special beveled lenses and crudely animated showroom dummy legs. They chose the title Ballet Mécanique from an image by Francis Picabia that had been published in his New York 391 magazine, which had also featured a poem and art by Man Ray. They ran out of money before they could complete the film. Fernand Léger helped financing the completion and contributed a cubist Charlie Chaplin image that was jerkily animated for the film.
These two beveled areas have different curvatures and in a well-made razor they transition seamlessly in the ridge (belly) and the cutting edge respectively. Sometimes there are three bevels. The ridge stabilizes the blade against torsional flexing in a direction perpendicular to its longitudinal axis by acting as a lengthwise spine for the blade. The distance between the ridge and the back of the blade is inversely proportional to the hollowness of the blade and is described in fractional terms in ascending steps of as, for example, hollow, hollow, or or (full hollow).
The quillons are normally cylindrical with knobbed tips, and in many instances are decorated with spiral fluting. The pommel is normally decorated to match the quillons and made to resemble the pommel of its matching rapier, while the grip is usually made of wood and wrapped with twisted and braided wire. The blade is normally made in three distinct sections or zones. The first section, near the hilt, comprises the ricasso (unsharpened portion) which is flat-sided and slightly beveled at the edges with one or two small holes at its forward end.
Steps to restore anterior fractured tooth: # A diagnostic cast and wax up # Fabricate lingual matrix - an impression of the lingual surface using additional silicone (Polyvinyl siloxane) -. # Isolation with rubber dam # Beveling the margins - ## 75 degree bevel at the facial side using diamond bur, followed by infinite bevel extending to middle third. ## 45 degree at Lingual side using diamond bur # Etching with phosphoric acid to the enamel including all beveled surfaces ## Etching time based on manufacturer’s instruction ## Etchant is rinsed off # Application of bonding agent. Agitate the bonding agent against the enamel surface.
A conical rhyton decorated with palm trees and nilotic floral motives in a Minoan style. The case also contains a stirrup jar with an ivy-leaf decoration, a prochous with the same floral pattern and two tall Keftiu cups with a spiral decoration. Case 22 contains pottery from the Palace's pantries and from the dumps of the acropolis including cups, kyathoi, kraters and some beveled jugs. Case 23 contains pottery items which were blackened and deformed by the fire which consumed the Palace, as well as grave goods from the pit grave in room 97.
Three amplitude-splitting interferometers: Fizeau, Mach–Zehnder, and Fabry Pérot The Fizeau interferometer is shown as it might be set up to test an optical flat. A precisely figured reference flat is placed on top of the flat being tested, separated by narrow spacers. The reference flat is slightly beveled (only a fraction of a degree of beveling is necessary) to prevent the rear surface of the flat from producing interference fringes. Separating the test and reference flats allows the two flats to be tilted with respect to each other.
To make the old and new buildings architecturally compatible, bricks were incorporated into the design of the new building's façade. Concrete floors were poured into the 12,000 square foot (1,115 sq m) corner building and once the new building was completed, floor joists were replaced with steel beams. The roof of the corner building was converted into a terrace for the fifth floor of the new building. The sixth through twelfth floors of the new building rise above and behind the corner building and features a beveled tower with a six-story arched window.
The pergola also extended around the east and south facades of the south wing, but only the north portion remains, enclosed as office space. The main image of the building is one of continuous but varied solid and void juxtapositions, with all voids topped by semicircular or segmental arches. On the ground floor this is expressed in the continuous Inset arcade along the south and west sides of the patio leading to the hotel entry. The segmental arches have square piers with beveled corners and corbelled imposts at the spring line.
The Pearl and Bess Meyer House is a historic house located at 233 E. 2nd St. in Flora, Illinois. The house was built in 1912 for Pearl Meyer, who owned a local dry goods store, and his wife Bess. Frank S. Nichols, the former mayor of Flora and contractor for the city's Baltimore and Ohio Railroad Depot, built the house in the Queen Anne style. The house's main entrance is within a wraparound front porch supported by wooden columns; the oak front doors include beveled glass panels and decorative moldings.
The most notable advantage of the scary sharp system is speed and cost. Anyone with access to sandpaper and a reasonably flat surface can sharpen any cutting tool, often with good results. Unlike traditional stones, no maintenance is required for the scary-sharp set-up, since the sharpening surface does not form a hollow with repeated, uneven usage. A hollowed surface is undesirable in most sharpening situations, an example being the flat surface required in the back (as opposed to the beveled surface) of most woodworking plane irons.
Moenkopi Formation Volcanoes continued to erupt through the Early Triassic on the north–south trending island arc to the west, which was located along what is now the border between California and Nevada. Shallow, marine water stretched from eastern Utah to eastern Nevada over a beveled continental shelf. As the sea withdrew around 230 million years ago, fluvial, mudflat, sabkha, and shallow marine environments developed, depositing gypsum (from lagoon evaporites), mudstones, limestones, sandstones, shales, and siltstones. It took many thousands of thin layers of these sediments to form the thick Moenkopi Formation.
Chinese chef's knife (top) and old North American cleaver (bottom) A meat cleaver is a large, most often rectangular knife that is used for splitting or "cleaving" meat and bone. A cleaver may be distinguished from a kitchen knife of similar shape by the fact that it has a heavy blade that is thick from the spine to quite near the edge. The edge is sharply beveled and the bevel is typically convex. The knife is designed to cut with a swift stroke without cracking, splintering or bending the blade.
The pickguard is quite small compared to most, and clearly is influenced by the first couple of prototypes built by Leo Fender back in 1949. Unlike other models, it does not extend over the area of the neck pickup. In most models, the pickguard has squared edges instead of beveled, is a single ply material in either black or white, and is designed very simplistically, as is the rest of the guitar. The majority of Telecaster have always had the controls mounted to a chrome plated, steel plate, going back to the prototype.
Rear view of 1989 Chrysler TC by Maserati The TC featured a detachable hard top with circular, beveled-glass opera windows with a six-point latching system and a manually operated cloth lined convertible top that was available in either tan or black. For the 1989 model year, interior leather colors were ginger or bordeaux. Available exterior colors were yellow, red, or cabernet. The bordeaux interior was only available with the cabernet exterior, both of which were dropped in 1990 when black and white exterior colors were added along with a black leather interior.
The rest of the forearm is similar to that of Herrerasaurus, with a strongly developed elbow area and a long hand. The ilium is short, although it has a pointed front tip in contrast with the rounded front edge of other herrerasaurids. Gnathovorax is the only herrerasaurid in which the pubis is both sinuous in front view, and projects straight down in side view. The pubis also possesses a large pubic boot with a smooth lower edge, similar to other herrerasaurids, although it lacks the beveled pubic booth of Staurikosaurus.
Thousands of beveled rim bowls have been found at the site, and it has been theorized that they were used to measure rations for families or dependant laborers. Another innovation in pottery invented and used by the potters of Uruk is the ceramic ring scraper. As the exportation of ceramics began, the weight of a large vessel became problematic when travelling as a trader. The ring scraper allowed excess, unnecessary material to be scraped from a vessel before firing, making the piece much lighter and easier to carry through town or across the desert.
The ΧΒΦ BadgeA shield with beveled edges; stamped on the face of the shield in the upper left corner (as faced) an electrode at discharge, symbolizing Physics; in the upper right corner a microscope, symbolizing Biology and Psychology; midway between these and in the point of the shield, a star, symbolizing Mathematics and Astronomy, with the surrounding nimbus representing the computer sciences; in the lower point of the shield crossed retorts, symbolizing Chemistry and Geology; across the center and face of the shield a band, bearing the Greek letters Chi Beta Phi.
His molds had innovative sharply beveled edges to provide fast release with clearer tone. Those molds are used to produce the three Delrin lines: Jetex with a multi-leveled gripping surface, and the Brites and Pro-Grip Brites lines with Fluorescent pigmented colors. A new stronger Nylon formula was also developed and used in these sharp edged molds. As the "standard" #351 pick emerged as the dominant pick shape, the need for 59 shapes diminished, but Tony wanted to increase its versatility. In 1974, he introduced the 4th and 5th sound: .
Travels to Arizona and New Mexico suggest some of the colors and shapes in the painting series called "Mesa", and other works are influenced by light on the Hudson River as viewed from her studio on the West Side of Manhattan. Visits to artist colonies such as the MacDowell Colony, Yaddo and the Virginia Center for the Creative Arts have also provided a backdrop to influence her work. Schwalb's oeuvre ranges from drawings on paper to artist books and paintings on canvas or wood panels. Many of these panels are carefully beveled so that the imagery seems to float off the wall.
Tournament officials marked and measured the throw at 552 feet and until 2014, was the longest distance toss for a sidearm (forehand) throw. Since new manufacturers have introduced heavyweight, beveled edge golf disc and new record attempts are in the high desert winds of Primm, NV, the world distance record is now just over 600 feet for the forehand (sidearm) throw. Westerfield's 552 foot throw is still the longest measured distance toss for a Wham-O brand Frisbee disc. In 1977, Kenner moved to London, Ontario, and created a disc manufacturing and distributing company called Discraft.
Edmund Knecht (2017), 670 pag. , (1) Engraving by hand is the oldest and most obvious method of engraving, but is the least used at the present time on account of its slowness. The design is transferred to the roller from an oil colour tracing and then merely cut out with a steel graver, prismatic in section, and sharpened to a beveled point. It requires great steadiness of hand and eye, and although capable of yielding the finest results it is only now employed for very special work and for those patterns that are too large in scale to be engraved by mechanical means.
Established flush with the walls, its ceiling consists of a metal deck, whose beams, silver in color, are supported by vertical walls. The decoration is in the Mouton-Duvernet style, but with an orange beveled tiling on the walls and the outlets of connecting corridors with line 1, a feature that was also found in the station of line 9 before its renovation; in addition, they are aligned horizontally and vertically. The lighting canopies are specific, fitted with metal blades. The advertising frames are also metallic and the 'shell' seats, characteristic of the Motte style, are blue.
Life restoration of an individual According to its describers in 2012, Yurgovuchia can be recognised from other dromaeosaurid taxa by the following characteristics: each side of the axial centrum have a single pneumatopore, third cervical vertebra with cranial end of the centrum not beveled, cervical prezygapophyses is flexed, cervical vertebrae epipophyses is above the postzygapophyseal facets, the pubis lacks pubic tubercle, the cranial faces of the centrum of caudal vertebrae are round, the cervical and dorsal vertebrae preserve hypapophyses without pneumatopores, the caudal prezygapophyses is distally elongated to the transition point, but not surpassing the length of a centrum.
Leather inlays, which are similar in form to inlays in woodworking, are shaped pieces of leather the same thickness as the covering leather on a book. A piece of leather the same shape, size, and thickness as the inlay is removed from the covering leather, and the inlay is placed into the resulting space. The edge of the inlay can be tooled, in which case the edge of the inlay is beveled, with the skin side of the leather slightly larger than the flesh side. This gives a smooth, well-supported surface for the impressions of the finishing tools.
Several sites have been excavated in the Euphrates valley in the south east of Anatolia, near the region of the Urukian sites of the middle Euphrates. Hacınebi, near modern Birecik in Şanlıurfa, was excavated by G. Stein and was located at the crossroads of some important commercial routes. Beveled rim bowls appear from phase B1 (c. 3800/3700 BC) and they are also present in phase B2 (3700–3300 BC), along with other objects characteristic of Late Uruk, like mosaics of clay cones, a terracotta sickle, an accounting bulla imprinted with the pattern from a cylinder seal, an uninscribed clay tablet, etc.
St. Mark's is located in the village center of Ashland, on the east side of Highland Street just south of the town hall. It is a single-story building, its exterior consisting of half-timber framing filled with brick usually laid in stretcher bond, and set on a granite foundation. Stained glass windows are set in their own panel sections, and have cinquefoil arched heads and beveled surrounds. To the southeast of the main block stands a tower with an open belfry, which is topped by a hip roof that transitions into an octagonal steeple shingled with fishscale wood shingles.
The main or front section of the building features D-ended towers at the northeast corner and beyond the northernmost bay of the west elevation. The end bay of the north facade, located between these two towers, is beveled. An 11-foot-wide veranda on a stone base extends from the south end of the east elevation around the north facade to terminate at a stone porte-cochere to the north of the D-ended tower on the west elevation. Its roof is supported by stone piers which rise above it, and it features a denticulated cornice.
On October 25, 2013, Jack Daniel's Properties, Inc. filed suit against the distiller of Popcorn Sutton's whiskey, claiming that the newly redesigned bottle, with its square shape, beveled shoulders, and white-on- black label, too closely resembled their own. The lawsuit said that the design "...is likely to cause purchasers and prospective purchasers of the product to believe mistakenly that it is a new Tennessee white whiskey product in the Jack Daniel's line." The suit asked that all current existing bottles be taken off the market and that all profits from the sales of those bottles be handed over to Jack Daniel's.
The decoration of the platforms, created for the centenary of the Metro and line 1, is "cultural" evoking the cultural history of the Metro in relation to that of the twentieth century thanks to thematic panels illustrated with iconic images by decades. The lighting is indirect, projected onto the walls and the vaults of the ceiling above the platforms. The beveled white ceramic tiles only cover the tunnel outlets, the outlets of the corridors and the walls under the crypt. The vault of the crypt is painted white, while its columns are covered with small flat white ceramic tiles laid vertically.
Porte de Bagnolet is a standard configuration station. It has two 105 meter long platforms separated by the metro tracks and the vault is elliptical. However, due to the difficult nature of the subsoil, composed of an anarchic mixture of gypsum, sand and clay, it is established on eighty piles of one meter in diameter, anchored in limestone at twenty-seven meters deep. The decoration, typical of the 1970s, is relatively similar to the Mouton-Duvernet style with walls covered with beveled beige tiles placed vertically and aligned, a white painted vault as well as two hanging lighting strips.
The direct lighting is white, while unlike most bands of this style, there is no multicolored indirect lighting present yet. The flat white ceramic tiles cover the pillars, vault and the spandrels but not the outlets of the corridors which are covered with white beveled tiles, this last point also constituting an exception to the Ouï-dire style. The name of the station is written in Parisine font on enamelled plates and the Motte seating is blue. Advertising frames are metallic instead of the blue half- circle, which is another exception to the Ouï-dire style.
The design of the G-400 follows that of the Gibson SG. Features include dual pointed cutaways, smaller pickguard (but in some cases, such as the 1966 model or any limited edition model, there is still a large pickguard), set neck, trapezoidal fingerboard inlays (late 80s and early 90s models had dot inlays), dual humbucker pickups, and beveled mahogany body. The biggest visual differences from the Gibson SG are the Epiphone headstock and wood-bound neck. The standard G-400, not limited edition, is available in two finishes: ebony and cherry. The Faded G-400 comes in worn brown and worn cherry.
According to F.J. Fortea, this last complex may be divided further into three phases, differentiated according to the dominant geometric figures. The first phase is characterized by an abundance of trapezoids, the second by triangles, and the third by a beveled geometry.Fortea 1971Fortea 1973 Settlements in the Valencian Community expanded considerably during the Mesolithic, increasing in number and even scattering throughout Castellón province, where few pre-Mesolithic artifacts have been found. Among the various settlements are Cueva de la Cocina, Cova Fosca, Cova de Santa Maira, Tossal de la Roca, Abric de les Malledetes, Cova dels Balus, and Cova Matutano.
The style has also seen the introduction of a new type of seating: a curved, rounded, individual seat called the coque, or shell model, after its distinctive shape. This extremely successful style has been used by the RATP in all of the major station renovations undertaken since 1999 as part of the Renouveau du Métro program. The style also lends itself to both minor and major renovation schemes. In stations that have the beveled tile already, renovation in Bruno-Gaudin style is fairly straightforward; other stations have been entirely retiled in the classic white tile to bring them into conformity with this style.
121 describes the high moral standards and high level of motivation the FBI expects from its staff. It also reflects the Bureau's own initials as a "backronym" of sorts. However, a Newsweek article from 2008 credits Edward Allen Tamm, once a top aide to J. Edgar Hoover who regularly briefed President Franklin Roosevelt on domestic intelligence matters with the invention of the motto: "He's credited in some bureau histories with inventing (in 1935) not only the bureau's name, but its official motto: Fidelity, Bravery, Integrity." The outer edge of the seal consists of a series of beveled golden peaks.
The term , meaning study or drawing room, has been used to denote reception rooms in residences of the military elite as well as study rooms at monasteries. A shoin has a core area surrounded by aisles, with smaller areas separated by fusuma sliding doors, or shōji partitions constructed of paper on a wooden frame or wooden equivalents, and . A main reception room is characterized by specific features: a recessed alcove (tokonoma); staggered shelves; built-in desks; and ornate sliding doors. Generally the reception room is covered with wall-to-wall tatami, has square beveled pillars, a coved and/or coffered ceiling, and .
Often the edges of shafts and holes are chamfered (beveled). The chamfer forms a guide for the pressing movement, helping to distribute the force evenly around the circumference of the hole, to allow the compression to occur gradually instead of all at once, thus helping the pressing operation to be smoother, to be more easily controlled, and to require less power (less force at any one instant of time), and to assist in aligning the shaft parallel with the hole it is being pressed into. In the case of train wheelsets the wheels are pressed onto the axles by force.
"Steady Ed" Headrick and Dave Dunipace are two inventors and players who greatly impacted how disc golf is played. In 1976 Headrick formalized the rules of the sport, founded the Disc Golf Association (DGA), the Professional Disc Golf Association (PDGA), the Recreational Disc Golf Association (RDGA) and invented the first formal disc golf target with chains and a basket. Dave Dunipace invented the modern golf disc in 1983, with the revolutionary change of adding a beveled rim, giving the disc a greater distance and accuracy. Dave was one of the founders of Innova, a well-known disc manufacturer.
Seven lines of glyphs on side a, with traces of an eighth on its beveled edge; six lines on side b, for ~ 270 glyphs in all, both legible and damaged. Although Barthel (1958) starts his transcription at the wide end of side a, the start of the text could just as well be at the narrow end (Barthel's line Da8); the same is true of side b. However, as the two sides are written with different hands, it is likely that these are distinct texts, and therefore that the question of recto vs. verso is irrelevant.
The lower part of the house is clad with double beveled weatherboards while the upper part comprises rough cast panels separated by vertical timbers and this pattern is extended to the gables. The house exhibits many technological innovations including wall recessed, sliding window sashes, modular wall- framing and convection heating vents to the fireplaces. The large timber door which slides to conceal the front dining room is further evidence of the technical innovation employed in the house. The house has a balloon frame construction which was introduced to Australia from California in the mid- nineteenth century.
The second and third floor facades are also rusticated with beveled blocks but have shallower crevices between each row. The center bay on Park Avenue South and the center three bays on 17th Street contain double- story arched openings with keystones at top, while each of the bay at the ends of each facade contain two windows per floor. On the Park Avenue South side, there is a small iron balcony projecting from the third story of the double arch, with the initials "G" and "L" on the iron railing. The third floor facade is topped by a denticulated (tooth-like) cornice.
Unfortunately this feature is considered a bit of a nuisance because it allows sand and other foreign bodies to enter the magazine easily and cause malfunctions in the operation of the weapon. Unlike the M16, the magazine well of the Type 89 is not beveled or tapered to ease loading because the lower receiver is only slightly wider than that of the magazine body. This is a point of considerable dissatisfaction by S.D.F members since it was discovered during recent urban combat training scenarios that it increases the time it takes to reload the rifle under certain combat situations.
The result is that light traveling an equal optical path length in the test and reference beams produces a white light fringe of constructive interference. The heart of the Fabry–Pérot interferometer is a pair of partially silvered glass optical flats spaced several millimeters to centimeters apart with the silvered surfaces facing each other. (Alternatively, a Fabry–Pérot etalon uses a transparent plate with two parallel reflecting surfaces.) As with the Fizeau interferometer, the flats are slightly beveled. In a typical system, illumination is provided by a diffuse source set at the focal plane of a collimating lens.
Princess cut diamond set in a ring The princess cut (technical name 'square modified brilliant') is a diamond cut shape often used in engagement rings. The name dates back to the 1960s, while the princess cut as it exists was created by Betazel Ambar and Israel Itzkowitz in 1980. The cut has a square or rectangular shape when viewed from above, and from the side is similar to that of an inverted pyramid with four beveled sides. Its popularity was at its highest in the 80s and 90s, though its popularity was high in the 2000s as well.
The Office of the President is located in McMillan Hall, which is the oldest building on campus, dating to 1793. Prior to 1912, the Office of the President was located in Old Main, taking the two rooms on either side of that building's main entrance. The President's House is a 17-room Victorian mansion on East Wheeling Street between the U. Grant Miller Library and The Burnett Center. It was built in 1892 by the Duncan family and is an archetypical Queen Anne Victorian style building, with ornate "gingerbread" details, stained and beveled glass, recessed doors and windows, and louvered wooden shutters.
The East Wenatchee Clovis Site yielded 36 ancient stone tools and 12 transversely beveled rods of carved and in some cases incised mammoth or mastodon bone, plus scores of stone flakes or "debitage" left over from tool manufacture or maintenance. It was the only intact Clovis site ever found in Washington state, and one of many significant prehistoric finds in the state’s history. The cache held the largest Clovis points then known to science, one of them 9.15 inches (23.25 cm) long, knapped from white agate (also called chalcedony). Before this discovery the largest Clovis points were only measured at around 6 inches.
Construction materials manual l. Basel: Birdhouse ;, 2006. Print. 60. Plasterboard is commonly made with one of three different edge treatments: tapered edge, where the long edges of the board are tapered with a wide bevel at the front to allow for jointing materials to be finished flush with the main board face; plain edge, used where the whole surface will receive a thin coating (skim coat) of finishing plaster; and, finally, beveled on all four sides, used in products specialized for roofing. However, four-side chamfered drywall is not currently offered by major UK manufacturers for general use.
Like many AR-15 type rifles, such as the M16/M4, the barrel is threaded to allow muzzle attachments such as a suppressor. The REC7 employs a free-floating Daniel Defense rail system, which allows many military accessories such as a bipod, night vision devices, and combat optics to be placed on the rifle. The REC7 features forged 7075 aluminum upper and lower receivers that are hard-coat anodized a deep black. The lower receiver has a single-stage trigger, a Magpul enhanced trigger guard for firing with gloves, and a beveled magazine well for rapid magazine changes.
To allow a visual check that all cards in a deck were oriented the same way, one corner of each card was beveled, much like Hollerith punched cards. Edge-notched cards, however, were not intended to be read by machines such as IBM card sorters. Instead, they were manipulated by passing one or more slim needles through selected holes in a group of cards. As the needles were lifted, the cards that were notched in the hole positions where the needles were inserted would be left behind as rest of the deck was lifted by the needles.
An attachment is added to the paving machine to provide a beveled edge at 30 to 35-degree angle to horizontal, rather than the usual near-vertical edge. This works by reducing the steering angle needed for the tire to climb up the pavement edge. For a vertical edge, the steering angle needed to mount the pavement edge is sharp enough to cause loss of control once the vehicle is back on top of the pavement. If the driver cannot correct this in time, the vehicle may veer into oncoming traffic, or off the opposite side of the road.
Usually each segment in a chain (which is constructed from riveted metal sections similar to a bicycle chain, but without rollers) features small sharp cutting teeth. Each tooth takes the form of a folded tab of chromium- plated steel with a sharp angular or curved corner and two beveled cutting edges, one on the top plate and one on the side plate. Left-handed and right- handed teeth are alternated in the chain. Chains come in varying pitch and gauge; the pitch of a chain is defined as half of the length spanned by any three consecutive rivets (e.g.
The portal niche of the madrasah is decorated with a beveled molding which make a knot on a pillar and keystone on both sides. The surrounding of the inscription is decorated with palmets (fan shaped glyph) and small badges. The second of the two rectangular windows on the east and the west walls of the hall is framed with geometrically patterned molding that forms with the intersection of thread line with checker and six-armed stars that have flower with six leaves at the center. Ornaments of the window on the east wall is not completed.
The M1951 is a short recoil-operated, locked breech pistol with a vertically falling locking piece and an open top slide (the locking mechanism design was influenced by the Walther P38 pistol). The locking piece, located under the barrel, is unlocked by a sliding pin and locked back into battery by a beveled surface on the pistol's frame. The locking piece features two locking lugs that engage appropriate recesses cut into the slide's internal side surfaces. When the pistol is fired, the locking piece, integral with the slide, goes back together with the barrel which is locked to the slide.
The right front portion of the roof at its curb is cut inward of the lateral ridgebeam to expose a small, second-floor balcony above a beveled side bay. A large, pedimented front gable includes an off center, mullioned spider web window. With Dr. James C. Davies and his family moved to Boise from Emmettsburg, Iowa, in 1904, first occupying a house the Idaho Statesman referenced as the Randall residence at 12th and Washington Streets. Dr. Davies purchased a lot from E.C. Cook one block east of the Randall residence, and he ordered construction of the 10-room Davies House.
Carnton's Greek Revival style back porch Carnton is a red brick Federal-style 11-room residence, that was completed in 1826 by Randal McGavock using slave labor. Built on a raised limestone foundation, the southern facing entrance façade is a two-story, five-bay block with a side-facing gabled roof, covered in tin, with two dormer windows, and slightly projecting end chimneys. A central two- story pedimented portico in the Greek Revival-style was added in 1847 by McGavock's son John McGavock. The two-story portico contains four, square Ionic columns with beveled recessed panels, and a simple vase shape balustrade on each level.
Typical vegetation in South East Asia is more woody than in South America, and the parang is therefore optimized for a stronger chopping action with a heavier blade and a "sweet spot" further forward of the handle; the blade is also beveled more obtusely to prevent it from binding in the cut. This is the same rationale and (in practical terms) the same design as the Indonesian golok and very similar to the Filipino bolo. The parang blade ranges from 10 to 36 inches (25.4 to 91.44 cm) in length. The parang has a weight of up to 2 lb (0.9 kg) and the edge usually uses a convex grind.
Permanent body piercings are performed by creating an opening in the body using a sharp object through the area to be pierced. This can either be done by puncturing an opening using a needle (usually a hollow medical needle) or scalpel or by removing tissue, either with a dermal punch or through scalpelling. Tools used in body piercing include: ;The piercing needle: The standard method in the United States involves making an opening using a beveled-tip hollow medical needle, which is available in different lengths, gauges and even shapes. While straight needles are useful for many body parts, curved needles are manufactured for areas where straight needles are not ideal.
In 1982, Taylor moved to Rochester, New York, to head the glass program at Rochester Institute of Technology's College of Fine and Applied Arts. He returned to the symmetry and precision of his machine- like glass constructions, this time finding inspiration in the world of medicine and surgery. His "Surgical Expansion" series, fabricated from factory-manufactured plate glass and glass tubing, featured scalpel-sharp pieces of beveled glass sheathed, and yet perfectly visible, inside transparent glass cylinders. Color began to come into these transparent pieces with the use of tinted industrial glass in peach, solar gray, solar bronze and blue as well as colorless glass.
Many interiors boast archways, hardwood flooring, cheerful bathrooms and galley kitchens with quaint breakfast rooms and built-in cabinetry sparkling with beveled mirrors and stained glass. Some fireplace mantels display multiple types of wood and are flanked by built-in bookcases, which were favorite gestures of the builder. Homebuilding was curtailed during World War II (because of strict rationing of materials for the war effort), creating a housing shortage for returning soldiers and their families. To help address the crisis, Oak Cliff realtor and builder Wiley Roberts, who also served as executive board chairman of the Dallas Association of Home Builders, announced his intention to finish out the Hampton Hills neighborhood.
A 15-meter-long crypt, the ceiling of which rests on closely spaced pillars, extends at western end for the introduction of the six-car train line in the 1960s. Furnished in the Andreu-Motte style, the station along with Opéra on line 3 and Concorde on line 8, they are only three stations decorated in this way, in purple, forming part of the lexicon of exceptional colors of this style. It is applied to light fittings, deck beams and seats. The benches, tunnel exits and platforms are fitted with large flat white tiles with a glazed appearance, while the outlets in the corridors are treated with classic beveled white tiles.
Designed by engineer Andrew Strand, a powerful 61 cubic inch (996cc) 45 degree V-Twin SOHC, 45 horsepower engine was the powerplant chosen for the Cyclone. The overhead cams were driven by a vertical shaft with beveled-gear ends, and the cylinder-head had a hemispherical head combustion chamber. All internal bearings were self-aligning rollers made by SKF, in an era when many motorcycle engines still used plain bushes on shafts. The Cyclone was capable of over 100 mph top speed, although the engine lubrication was crude, and it was fragile over long-distance races of 100 miles or more that were popular on the board tracks of the era.
For example, a 3-D box that is beveled on all edges and corners can be constructed as a 13-DOP. The actual number of faces can be less than 2 times k if some faces become degenerate, shrunk to an edge or a vertex. A minimum bounding rectangle or MBR – the least AABB in 2-D – is frequently used in the description of geographic (or "geospatial") data items, serving as a simplified proxy for a dataset's spatial extent (see geospatial metadata) for the purpose of data search (including spatial queries as applicable) and display. It is also a basic component of the R-tree method of spatial indexing.
Life restoration All titanosaurs had what is called wide-gauge posture, a relative term to describe a stance in which the feet fell apart from the body midline. More derived titanosaurs had a greater degree of wide-gauge posture, with their limbs held more widely than their ancestors and contemporaneous counterparts. The stance of Dreadnoughtus schrani was clearly wide-gauge, but not to the degree of saltasaurids because the femoral condyles are perpendicular to its shaft rather than beveled. This and the fact that the head of the femur was not turned in towards the body as in saltasaurids support the phylogenetic conclusion that Dreadnoughtus was not a saltasaurid.
A Homer Young dresser (theatrical) trunk Dresser trunks also known as pyramidal trunks, due to their shape, are a unique form of wall-trunk that generally date from the 1900–1910 era. They are characterized by a lid that opens up nearly the entire front half of the trunk, allowing it to rest on the bottom. Two prominent manufacturers of this trunk style were F. A. Stallman and Homer Young & Co. Oak-slat trunks incorporating many construction-styles (e.g. dome-top, flat-top, beveled-top) were built on a wooden frame, where the malletier would fit thin oak slats vertically side-by-side until the entire trunk was covered.
They exhibit prismatic cleavage and extend for a few millimeters in length. Other minerals identified were dark green, pyroxene crystals with 70 percent hedenbergite and 30 percent diopside; white aggregates of tridymite; brown, granular olivine crystals with 80 percent forsterite and 20 percent fayalite; and tiny black, hexagonal plates of hematite with beveled edges. These minerals constitute a rare combination, and Trimble (1963) was unable to explain why free silica tridymite would be found together with low silica olivine. The hill descends to meet the floodplain of the Columbia River, and at lower elevations, the mountain has cliffs on its northern and eastern sides.
This is intended to explain the different degrees of influence or acculturation. for the conclusions. In effect, the impact of Uruk is generally distinguished in specific sites and regions, which has led to the development of multiple typologies of material considered to be characteristic of the Uruk culture (especially the pottery and the beveled rim bowls). It has been possible to identify multiple types of site, ranging from colonies that could be actual Urukian sites through to trading posts with an Urukian enclave and sites that are mostly local with a weak or non-existent Urukian influence, as well as others where contacts are more or less strong without supplanting the local culture.
Redesigned HTC Hero for Sprint, available in Canada from Manitoba Telecom Services as the HTC Android 6250 (Hero) The Sprint, Cellular South, Cellcom, Bluegrass Cellular, Manitoba Telecom Services, NTelos, and Cox Wireless version of the HTC Hero is different from those that are sold in Asia, Canada and Europe. The outer body is significantly altered, with the controversial "chin" that is present on the Asian, Canadian (some providers) and European models being removed in favor of a smooth, beveled surface where all but two of the once raised buttons now lie flat. Also due to performance issues some of the clock animations were removed. Some carriers may market it as the HTC Android 6250.
The idea is to cull, or to find the cards one needs, place them at the bottom, top, or any other place the cheat wants, then false deal them to oneself or one's confederate. One sign of false dealing could be when a dealer grips the deck with the index finger in front of it or their pinky and pointing finger on both short sides of the deck while the other fingers support the deck while the cards are being beveled slightly. This is referred to as the "Mechanic's Grip". It not only allows better control of the cards, but provides cover by showing the back of the top card, and without moving the hand holding the deck.
The Five-seven has a loud report and produces considerable muzzle flash, but it has roughly 30 % less recoil than a 9×19mm pistol, improving controllability. The Five-seven pistol feeds from detachable box magazines, but it is unconventional in that it feeds cartridges into the chamber without the use of a barrel feed ramp, having a beveled chamber only—the pistol's feeding is inherently reliable because of its use of bottlenecked cartridges. The pistol is supplied with 20-round magazines as standard, or 10-round magazines for jurisdictions with a high-capacity magazine ban. The Five-seven will also accept an aftermarket extended 30-round magazine, which protrudes an additional from the base of the pistol.
In 2006, the remaining portion of the site was purchased for preservation by The Archaeological Conservancy. Archaeological excavations at the Lamoka Lake site have recovered large numbers of projectile points - primarily Lamoka points; stone netsinkers, groundstone and polished stone tools - including beveled adzes, hammerstones, pestles, mullers, mortars, and metates; bone tools - including awls, knives, and fish hooks; lithic debitage; and animal bones - primarily white-tailed deer, tree squirrel, and passenger pigeon; and human burials. Numerous archaeological features, including pits, postmolds, hearths, firebeds and ash layers, have also been identified. The majority of artifacts and features date to the Late Archaic Period, although later Woodland Period artifacts have also been recovered from the site.
Luthiers often use a beveled edge, which allows a more aggressive burr, but on one side only. There are a number of variations in the process of turning the burr, the choice of which is down to personal preference. However the basic concept is that the burnishing rod is held against the edge of the scraper at a slight angle and drawn along the edge a number of times until the burr is created. One variation involves holding the rod flat against the side of the scraper for the first few passes to create a burr pointing away from the edge and this is then rolled back down by drawing the rod along perpendicular to the scraper.
Solférino station on line 12 is one of the few whose original Nord-Sud decoration has remained intact. Solférino station. To attract travelers, the Nord-Sud Company, which built what is now line 12 (line A, Porte de Versailles to Porte de la Chapelle) and part of the northern section of what is now line 13 (line B, Saint-Lazare to Porte de Clichy and Porte de Saint-Ouen) chose a more elaborate decorative scheme for the interior of its stations than that of the CMP. Most of the tile was the familiar white beveled type, but the white tile was complemented by arches of colored tile over the vault and garland-like swags on the walls.
Brass guitar pick handcrafted by artisan picksmith Dustin Michael Headrick of Master Artisan Guitar Picks and Nashville Picks. Master Artisan Guitar Picks, also known as Nashville Picks is a brand of guitar picks created by Nashville, Tennessee musician, producer, artist and picksmith Dustin Michael Headrick. These guitar picks are handcrafted from a variety of materials including antique metals, cymbals, coins, wood, glass, bone, animal horn, natural stone, clay, vinyl records, Acrylic and Formica (plastic). The guitar picks are recognized as being extremely aesthetic, having liquid smooth beveled edges that glide across the guitar strings without causing string wear, create a unique tonal palette, and improve the sound of the electric guitar and acoustic guitar.
When shooting paper targets, they cut a relatively clean hole in the target, yet provide more case volume and a better ballistic coefficient than a flat front wadcutter. When used for hunting, the heavy bullets provide excellent penetration; they are often used on dangerous game, for which more reliable penetration is required than is possible with expanding hollow point or soft point bullets. Keith-Style SWCOriginally Keith specified a meplat that was 65% of the bullet caliber, but later increased it to a 70% meplat. The other distinguishing characteristics of a "Keith-style" SWC are a double radius ogive, beveled crimp groove, three equal width driving bands, wide square bottomed grease groove, and a plain base with sharp corners.
The end ramps of conductor rails (where they are interrupted, or change sides) present a practical limitation on speed due to the mechanical impact of the shoe, and is considered the upper limit of practical third-rail operation. The world speed record for a third rail train is attained on 11 April 1988 by a British Class 442 EMU. In the event of a collision with a foreign object, the beveled end ramps of bottom running systems can facilitate the hazard of having the third rail penetrate the interior of a passenger car. This is believed to have contributed to the death of five passengers in the Valhalla train crash of 2015.
St. Clair Shores: Somerset, 1999, 563. Constructed in 1865, the Bates Building is a simple frame building with a gabled roof of shingles; it is three bays wide, and each side is a single bay. A significant exception to the house's simple construction is the ornate front porch, which appears to have been built after the rest of the house; complicated beveled woodwork covers the pillars of the porch. The eastern side of the house is otherwise the most distinctive part of the building; an outward projection on that side is the only exception to the house's rectangular shape, and included in the projection is a small oval window, which is the only non-rectangular window in the house.
The Four Mile Tree Plantation House is a brick structure, one-and-one-half-stories with hip-on-gambrel roof, pedimented dormers and four interior end chimneys. The brick is laid in Flemish bond above the beveled watertable raith English bond below. The entire brick surface was stuccoed and scored in imitation ashlar in the nineteenth century but the stucco has deteriorated on portions of the facade and fallen off. All openings on the five-bay facade, except for the central entranceway, were altered in the late nineteenth century or early twentieth century and have two-over-two sash; the entranceway, sheltered by a nineteenth-century Roman Ionic porch, consists of a transom over three-paneled double doors, the top panel of each being scrolled.
Southern Pacific Railroad's AC-7 class of cab forward steam locomotives was the fourth class of the 4-8-8-2 locomotives purchased by Southern Pacific (SP). The locomotives were built by Baldwin Locomotive Works and shared many of the same characteristics of previous AC class locomotives. The AC-7s were only slightly larger than their AC-6 predecessors, but they included larger tenders and a beveled cab front in contrast to the earlier classes' flat cab front. In the early 1940s, the majority of the class received larger cab windows of a design that would become standard with the AC-8 class. In April 1937, locomotive number 4162 was pulled aside for a series of publicity photos at SP's Sacramento, California, shops.
Colcord's three-story pillared Georgian home with its beveled-glass windows, mirrored ballroom, and carriage house was demolished in 1965 and replaced by a now-failed insurance company building. Alarm of the demolition of the Colcord mansion led to the establishment of a historical preservation district in what became known as "Heritage Hills" and the preservation of the nearby Henry Overholser mansion and other monuments to the early days of the city. In their book, "Vanished Spendor", Jim Edwards and Hal Ottaway (Abalache Book Shop Publishing Co. 1982), gives the following description of the home: > Built and designed by William A. Wells, this mansion was almost an exact > replica of Mr. Colcord's father's home in Kentucky. It had twenty-five > rooms, besides halls, nooks, closets, and baths.
189 A further complication was that issues of barrel wear from the Rifleite smokeless powder and corrosive primer used in the 6 mm cartridge continued to plague Navy ordnance authorities. Finally, due in part to its long, thick-gauged semi-rimless rim case and beveled rim, the 6mm Lee was one of the most expensive service cartridges to produce in terms of cost per round, yet it was already becoming obsolescent in comparison to ammunition that used more efficient powders and true rimless cases. Rapid developments in military small arms ammunition would soon demonstrate the advantages of a magazine-fed rifle and machine gun cartridge with a rimless case and spitzer bullet, features not found in either the .30 Army or the 6mm Lee.
In small sizes, the compression fitting is composed of an outer compression nut and an inner compression ring or ferrule (sometimes referred to as an "olive") that is typically made of brass or copper. Ferrules vary in shape and material but are most commonly in the shape of a ring with beveled edges. To work properly, the ferrule must be oriented correctly—usually the ferrule is fitted such that the longest sloping face of the ferrule faces away from the nut. When the nut is tightened, the ferrule is compressed between the nut and the receiving fitting; the ends of the ferrule are clamped around the pipe, and the middle of the ferrule bows away from the pipe, making the ferrule effectively thicker.
Externally, the most significant change was an increase in wheelbase length of , resulting in more interior space and an additional of rear-seat legroom. However, as the overall length remained the same, trunk capacity was slightly reduced. The more aerodynamic body (Cd 0.28) retained the general profile and contours of the original LS 400 and was the work of the Calty Design Research center in the U.S. Designers had evaluated 20 competing concepts, including several with a radically changed body, before selecting a winning entry in 1991 that included forms and contours similar to the original LS 400. Upon final approval in 1992, an evolutionary redesign was the ultimate result, with new design features consisting of sharper angles, curved body lines, and a beveled grille.
Starting the 5/2 second favourite, French Holly recovered from an early mistake to take the lead before half way and drew steadily clear of his rivals to win by nine lengths from Master Beveled, with Dato Star a further eight lengths back in third. With Thornton suffering from a leg infection Adrian Maguire took over the ride on French Holly when the gelding was matched against the reigning Champion Hurdler Istabraq in the AIG Europe Champion Hurdle at Leopardstown Racecourse. Starting the 9/4 second favourite he took the lead from the start and maintained his advantage until he was overtaken by Istabraq approaching the last. He finished second, a length behind Itabraq and seven lengths clear of Zafarabad in third.
1968 featured mostly carry- over styling from 1967, but the hood was longer this year, as it extended all the way to the base of the windshield to cover the "hidden" windshield wipers. Also new for 1968 was a stylish beveled deck lid. The $6,867 vinyl-roofed Sixty Special Brougham sold 15,300 models this year, while the standard Sixty Special with its painted metal roof (priced at $6,552) sold just 3,300 cars. Most Cadillac buyers clearly considered the $315 price difference insignificant. 1969 Cadillac 60 Special Brougham All-new styling appeared in 1969, and the two Sixty Special models had distinct rooflines from the other Cadillacs. A 60/40 split bench seat was standard in the Sixty Special Brougham, optional in Sixty Special.
Some firearms, like the FN Five-seven, have a beveled chamber instead of a feed ramp. The feed ramp is a critical part of semi-automatic firearms and automatic firearms. When the pistol is fired and the spent case is ejected, the feed ramp functions to direct a fresh cartridge from the magazine into firing position; that is, the fresh cartridge slides along the feed ramp into battery. The need for the cartridge to slide both forwards and upwards along the feed ramp and into the barrel is the primary design consideration that makes the ogive the preferred shape for all modern automatic pistol rounds (a hollow point bullet is a truncated ogive), as there are many other shapes that are stable in ballistic flight.
Tecovasuchus was first recognized as a new taxon in 1995, although it was not named until the description of the type species, T. chatterjeei, in 2006. Before its description, specimens of Tecovasuchus were thought to belong to Paratypothorax or a Paratypothorax-like aetosaur. Several features of the osteoderms distinguish Tecovasuchus from other aetosaur genera, including dorsal paramedian osteoderms with strongly thickened and beveled posterior edges and ornamentation consisting of deep pits and radiating grooves, as well as tongue-shaped dorsal and plate-like ventrolateral flanges. Tecovasuchus is an index taxon for the St. Johnsian sub-LVF (land vertebrate faunachron) of the Adamanian LVF, and the presence of material belonging to the genus helps correlate different Late Triassic localities throughout the southwestern United States.
Above, within the round patio, limiting the parapets are pyramid bases, one to the north and another at the south, with stairs geared toward the center. The North has a smooth vertical panel and the south has a beveled cornice. According to the remains found, these bases maintained small altars with column portals, ceilings and stone altered battlements: one shaped as arrowheads, others composed of a disk with two circles engraved, this monument is called "Quetzalcoatl Temple" and is believed to belong to the Toltec horizon by the Toltec cultural traits observed in its architecture. In earlier times, between 300 BCE and 600 CE., flourished a cultural complex known as shaft tombs tradition characterized by underground architecture and offerings deposited inside the funeral chambers.
It was built with four covered porches, including the main south entry, the north side entry from the detached garage, and two interior covered porches, one which opened from a second-floor guest bedroom and the main porch one which spreads the entire width of the home on the east side, overlooking downtown Muskogee to the east. The open covered porch on the east side of the home had its own source of water supply and was large enough to accommodate a full-size hammock. The home has a full walkout basement, with several separate rooms. The large foyer entry way inside the main entry door on the south side has dual sidelight clear lead-glass windows with beveled panes behind carved stone benches which straddle the front porch.
It adds a 1-slot Picatinny rail, more aggressive front and backstrap checkering and a beveled magazine well for easier reloading of the weapon. M9A1 pistols are sold with physical vapor deposition (PVD) coated magazines developed to better withstand the conditions in the sandy environments in Iraq and Afghanistan. ;M9A3: (2015–present) : The M9A3 (the M9A2 concept never went into production) was released in 2015, as a potential upgrade for the US military, in response to the Modular Handgun System trials. The main updates to the M9A3 were a 3-slot Picatinny rail, thinner vertical grip, removable wrap-around grips that can be swapped between Vertec-style and 'old' M9 style, fully removable tritium night sights and a universal slide, which makes the gun convertible from decocker-safety to decocker-only mode.
" Leavitt's innovation was the beveled face of the cylinder, which was designed to direct flash from the fired cylinder away from adjacent chambers, thus preventing multiple discharges, the major problem with early percussion revolvers. In his design, Leavitt attempted to solve the problem through the beveling and the new convex shape he imparted to the revolving cylinder.Leavitt built on his innovation for pistol design with a follow-up design some years later for a rifle using the same principle. Leavitt's design, wrote Philadelphia's Journal of the Franklin Institute in 1838, was "one of those fire arms which have several chambers bored in a cylinder, the axis of which is parallel to the axis of the barrel of the gun, and which chambers can be successively made to coincide with the said barrel.
Other ornamentation included little round niches, containing small Swiss crosses, reflecting the increasingly assertive nationalism of the age. The streetside beveled corners of the hotel building were built out, first on the northwest corner and subsequently on the southwest corner, and topped off with little crowned domes. The large western facade facing the main street was repositioned a little away from the road, making space for a terrace between the public street and the hotel's public rooms. It was no longer necessary for guests to cross the road in order to sit on the hotel terrace and watch the traffic and bustle along the increasingly busy road to the Bernina Pass, beyond which the more distant view across to the Roseg Valley, its glacier, and the surrounding mountains remained for most purposes unimpaired.
As issued, the blade's secondary or false edge was intentionally sharpened and beveled for only a portion of its length, leaving an unsharpened spine on the top of the blade in an effort to stiffen the relatively narrow blade. This limited the usefulness of the M3 when employed for backhand slashing strokes. After U.S. Army ordnance began developing a proprietary bayonet for use on the M1 carbine, it was realized that the new carbine bayonet, which already incorporated the M3 blade design and leather-wrap grip, could also replace the M3 in service in a secondary role as a fighting knife. The carbine bayonet, now designated the Bayonet, U.S. M4, was added to the Company Table of Organization in June 1944, and the M3 was declared to be a limited standard ordnance item, with supplies to be issued until exhausted.
It has been pointed out that the Huber Phase pottery (from the Chicago area) very closely resembles Orr Focus. Specifically, Huber Trailed is thought to be a very similar type to Allamakee Trailed. Huber Trailed has rectilinear patterns, lip notching and very similar vessel form to Allamakee Trailed. A detailed comparison of pottery from a Huber site (Oak Forest) and at the Midway site did reveal some differences between them: the lips on Orr pottery were almost always rounded, which Huber lips could be rounded, flattened or beveled; the rim profiles on the Orr pottery were almost always vertical while the Huber pottery more often had inward or outward curve; the Huber necks were more often angular while the Orr necks were more often curved; and trailed lines were more often to be combined with punctate decoration on Orr than Huber.
NBC Sports first switched to digital on-screen graphics in 1995, although in a very limited, text-based form. A modernized graphics package for the telecasts rolled out in 1999, based around translucent black rectangles, with beveled gold bars at the top and bottom, with blue accents for most sports (green for golf, purple for Wimbledon, and orange for the tennis French Open). Scoring bugs were still not a permanent feature, as they disappeared during plays until 2005, when the network introduced horizontal scorebars for its coverage of college football and hockey, which did not match the other graphics. The graphics, which still did not have any animation, were modified in 2002 to feature rounded edges, and the translucent color was changed from black to the color of the accents, which also replaced gold as the border color.
Within the U.S. Public Health Service, those wearing the rank of ensign are part of a commissioned officer student training, and extern program (COSTEP), either junior, for those with more than a year remaining of education in a commissionable degree (JRCOSTEP), or senior, for those within one year of graduating with a commissionable degree (SRCOSTEP). Some officers may hold a permanent rank of ensign based on their experience and education, but then can hold the temporary rank of lieutenant, junior grade. Note: Pin-on insignia for all U.S. services shown here are incorrectly depicted as U.S. Army / U.S. Air Force second lieutenant insignia; the U.S. Naval Services (U.S. Navy, U.S. Marine Corps, and U.S. Coast Guard), as well as the U.S. Public Health Service and the National Oceanic and Atmospheric Administration, use a gold-colored bar that does not have beveled edges.
The outside facade is distinguished by a supposedly medieval tower, but some authors opine that it is late-medieval, corroborated by the portico, beveled edges, and a frame formed by staves forming the arch. The monastery is accessible by a staircase on its left lateral façade. A wall intersects the valley, orientated east to west, crossed by the Ribeira dos Frades (with the same orientation), consisting of three hills: to the east, a steep incline, is the highest point; on the northern slope, a softer topography, with terraces; and in the south, an area of cultivation. Along the floodplain of the valley, is the main convent, with the Chapel of Nossa Senhora da Cabeça along the eastern slope, with scattered agricultural and residential buildings, as well as the propertyowner's residence, that includes irrigation tanks around the religious building.
He was able to ascertain without much difficulty that the instructions had not been followed because no plans or sections of the track, bridges, stations, culverts or the work specified in the contract could be found. Even in the section, where the rails had been laid, the execution had only a provisional character: the railway embankments were made ftom material that had been dug-out alongside the embankment ditches, so that the drainage was obstructed, which led to water accumulation and endangered the strength of the railway embankments. Only in a few cuttings the sides were beveled, but the excavated material had been piled up along the crest line. Two of the culverts, one with drywall and the other one measuring 0.6 x 0.7 x 11.15 m (2 ft × 2 ft 4 in × 36 ft 7 in), were unsafe.
Other original furnishings include large beveled mirrors, antique cash registers, wooden booths, and New York's oldest dumbwaiter that ferries food orders from the upstairs kitchen down to the bar. Another notable feature is the row of old-style full-length urinals in the first floor Men's room, dating back to 1910. A creaky wooden staircase (also original) leads to an upstairs dining area, which was closed for several years before being reopened in the 1970s to cater to an unexpected increase in patrons coming to the bar on their lunch break. Several artists and Hollywood directors have used the Old Town as a backdrop for their productions and movie scenes, including rap group House of Pain for a music video for their 1992 single "Jump Around", and director Whit Stillman for his 1998 feature film The Last Days of Disco.
It has been pointed out that the Huber Phase pottery (from the Chicago area) very closely resembles Orr Focus. Specifically, Huber Trailed is thought to be a very similar type to Allamakee Trailed. Huber Trailed has rectilinear patterns, lip notching and very similar vessel form to Allamakee Trailed. A detailed comparison of pottery from a Huber site (Oak Forest) and an Orr Focus site (Midway) did reveal some differences between them: the lips on Orr pottery were almost always rounded, which Huber lips could be rounded, flattened or beveled; the rim profiles on the Orr pottery were almost always vertical while the Huber pottery more often had inward or outward curve; the Huber necks were more often angular while the Orr necks were more often curved; and trailed lines were more often to be combined with punctate decoration on Orr than Huber.
Istabraq had won eighteen of his last nineteen races and started at odds of 1/7 with Limestone Lad, on 13/2, was the only one of his four opponents to attract any real support in the betting. Limestone Lad took the lead from the start as usual and opened up a clear lead but the favourite moved up to challenge at the second last. On this occasion, however, Limestone Lad drew away again in the closing stages and won by five and a half lengths, with a gap of more than thirty lengths back to the Welsh challenger Master Beveled in third. The Independent's correspondent described the result as the biggest upset of the year, whilst Istabraq's trainer, Aidan O'Brien offered no excuses, commenting, "Take nothing away from the winner, he is a very good horse".
The NFC antenna is placed on the left-hand side of the new triple-lens camera system, housed in a raised module with chrome beveled edges surrounding it, along with the color sensing (RGBC-IR sensor) and the single LED flash up top. The front houses the ultra-wide 4K HDR OLED display with a slight curve corners and very minimal bezels on both sides, and a significantly slim (when compared to the XZ3) but asymmetrical top and bottom bezels. On the top bezel are the earpiece that acts as part of the hybrid dual-stereo speaker setup, the 8 MP front-facing camera, ambient light and proximity sensor and a notification LED. The hybrid SIM tray is located on the top of the device, with a sealed pull-out type cover for added ingress protection.
Renovated tiling in 1900 style In 1996 Saint-Augustin on line 9 was chosen as the trial station for a new renovation style. Its original feature is a new light housing (known as the Bruno-Gaudin light fixture) with a wide wave- shaped reflecting surface which is attached to and follows the curve of the vault, hides the bare fluorescent bulbs seen throughout the metro after World War II, and also hides cables efficiently. The style, which focuses on maximizing the amount of light in the stations and hiding unsightly fixtures, also returns to the classic beveled white tile, which reflects light better than all other types that have been used on the system. For this reason, Bruno-Gaudin can be seen to represent a return to the design charter of the original Métro of 1900, and represents a kind of "neo-CMP" aesthetic.
The material culture has some traits which are shared with that of Late Uruk and Susa II. Level V of Godin Tepe could be interpreted as an establishment of merchants from Susa and/or lower Mesopotamia, interested in the location of the site on commercial routes, especially those linked to the tin and lapis lazuli mines on the Iranian plateau and in Afghanistan.H. Weiss and T. Cuyler Young Jr., "Merchants of Susa: Godin V and plateau-lowland relations in the late Fourth Millennium B.C.," Iran 10 (1975) pp. 1–17 Further east, the key site of Tepe Sialk, near Kashan, shows no clear evidence of links with the Uruk culture in its Level III, but beveled rim bowls are found all the way out to Tepe Ghabristan in the ElbourzY. Majidzadeh, "Sialk III and the Pottery Sequence at Tepe Ghabristan: The Coherence of the Cultures of the Central Iranian Plateau," Iran 19 (1981) p.
The Texas Meritorious Service Award is a black, plastic plaque in the form of a shield, measuring 8-1/2 inches in height and 7 inches in width. It is mounted evenly on a shield-shaped wood background of beveled, stained, and varnished pecan or oak, 1/2 of inch thick and 1-1/8 inches larger than the plastic shield. The plastic shield has a raised gold border, a raised gold (3 inches in circumscribing diameter) reproduction of the seal of the State of Texas, centered in the upper half of the shield, and five lines of raised gold 1/4 of an inch upper and lower case block letters which read, "Texas Meritorious Service Award in Recognition of Outstanding Service and Support of the State Military Forces." Beneath the last line of lettering is a depressed box, 1-3/4 inches in length and 1/2 of an inch in height for insertion of an individualized brass plate.
The Meritorious Service Medal is a bronze medal, 1.5 inches in diameter overall, consisting of six rays issuant from the upper three points of a five-pointed star with beveled edges and containing two smaller stars defined by incised outlines; in front of the lower part of the star an eagle with wings upraised standing upon two upward curving branches of laurel tied with a ribbon between the feet of the eagle. The reverse has the encircled inscriptions "UNITED STATES OF AMERICA" and "MERITORIOUS SERVICE." The suspension ribbon is 1 3/8 inches wide and consists of the following stripes: 1/8 inch Crimson 67112; 1/4 inch White 67101; center 5/8 inch Crimson; 1/4 inch White; and 1/8 inch Crimson. Additional awards of the Meritorious Service Medal are denoted by bronze oak leaf clusters in the U.S. Army and U.S. Air Force, with one silver oak leaf cluster denoting five additional awards.
Key Marco Cat, excavated at Key Marco in 1896, on display at the Smithsonian Institution There were seats made from flat slabs of wood from in length, slightly hollowed on top from end to end as well as from side to side, with rounded bottoms and substantial, prong-like pairs of feet near either end, from long. Some of these stools had the feet level while others were spread and beveled so that they would fit in the hollow bottoms of canoes. Portions of mats, some thick, as though for use as rugs, others enveloping various objects, and others still of shredded bark in strips so thin and flat and closely platted that they might well have served as sails, were frequently discovered, yet none of them could be preserved. It was obvious, however, that the peoples who had inhabited the court understood well, not only platting, but weaving and basketry-making too.
A somewhat similar decorative class of door is found in Verona, where the edges of the stiles and rails are beveled and notched. Glass door decorated with Art Nouveau elements, from the Singer House (Saint Petersburg, Russia) In the Renaissance period, Italian doors are quite simple, their architects trusting more to the doorways for effect; but in France and Germany the contrary is the case, the doors being elaborately carved, especially in the Louis XIV and Louis XV periods, and sometimes with architectural features such as columns and entablatures with pediment and niches, the doorway being in plain masonry. While in Italy the tendency was to give scale by increasing the number of panels, in France the contrary seems to have been the rule; and one of the great doors at Fontainebleau, which is in two leaves, is entirely carried out as if consisting of one great panel only. The earliest Renaissance doors in France are those of the cathedral of St. Sauveur at Aix (1503).
The Xperia XZs' design is exactly the same "Loop Surface" design as the previous-gen flagship, the Xperia XZ, save for the raised lens "hump" with a beveled edge surround for the new Motion Eye camera. It consists of 3 different materials: a nylon frame, scratch-resistant front glass panel made of Corning Gorilla Glass 5, and an aluminium alloy metal back. The subtly-curved rear cover is made from ALKALEIDO alloy, trademarked by Kobe Steel, finished in a matte-like texture that gives a distinct shine when hit by a light source, complementing the smartphone's recognizable shape that debuted with the Xperia XZ. The front houses the 5.2-inch LCD display flanked by the dual front-firing stereo speakers; one on the top bezel along with the 13 MP front selfie camera, ambient light and proximity sensors and notification LED; and the other one at the bottom bezel. The top of the device houses the 3.5 mm headphone jack with a 2nd microphone pinhole adjacent to it; the bottom has the USB Type-C port and primary microphone.
Calle Junín, at the heart of the Recoleta neighborhood From the end of the nineteenth-century to the start of the 1920s, the Recoleta neighborhood has witnessed the construction of a great number of “châteaux” (often imitating those of the Loire valley in France), as well as Parisian style petits hôtels, almost always designed by architects of French origin. The major portion of the building materials (boiseries, slate roof tiles, marble for staircases, bronze and iron work, chandeliers with lead crystal prisms, glass lamp shades, ornate gilded mirrors, and beveled lead crystal window panes, mosaics, etc.) were brought from Europe. But just as it occurred in other neighborhoods of Buenos Aires, these grand buildings, in large part, have been demolished since the 1960s due to the realities of the real estate market: on the land that held an extraordinary private mansion, several ordinary modern buildings could be erected. Currently several neighborhood groups which organize marches, meetings, and other events are working to halt further destruction of existing landmarks.
Eclipse won the best-of-three heats competition. 60,000 spectators watched.(May 22, 2009) Racing to history, Daily Racing News, Retrieved November 15, 2010 ("May 27, 1823: A $20,000 match race between American Eclipse (representing The North) and Henry (representing The South) was held at Union Course, Long Island. Eclipse won in two-of-three heats, after his original jockey, William Crafts, was replaced by Samuel Purdy before the second heat. The race, witnessed by 60,000 spectators, was the first to have been timed by split-second chronometers, which were imported for the event.") Grimes, William (May 10, 2006). The Day Two Great Horses Foreshadowed the Civil War, The New York Times, Retrieved November 15, 2010 (May 31, 1908) Where the Ponies Run for the Masses, The New York Times, Retrieved November 12, 2010 (May 14, 1905) New York Racing Returns to Its Original Home, The New York Times, Retrieved November 12, 2010 In the 1830s, likely 1837, the Union Course became the first racecourse in America to have beveled turns, turned up on the outside, thus increasing speed on the course. The popularity of match races at Union Course gradually declined; after 1851, trotting races became the main attraction.

No results under this filter, show 429 sentences.

Copyright © 2024 RandomSentenceGen.com All rights reserved.