98 Sentences With "bearing with" | Random Sentence Generator

It's not ideal ... Thank you for bearing with us.

Thanks so much for bearing with us in the meantime.

Thank you, everyone, for bearing with us in the meantime.

Thanks for bearing with us and hope you find your honey.

Thank you for bearing with us through any negative side effects from this change.

Thank you for bearing with us as we embrace the future of music journalism.

She's bearing with her husband, who keeps starting conflict, and is very frustrated by him.

He tried to encourage child-bearing with cash handouts, more breast-feeding facilities and the like.

"Thanks for bearing with us during the security alert on London Bridge St," police said on Twitter.

And their rate of child bearing with men five years or more their senior was 61 percent less.

" It added: "Thank you for bearing with us as we work through the growing pains that every first year event experiences.

Evaluation of logs and samples collected during drilling and wireline operations suggests the Campanian reservoir objective was water-bearing with some residual hydrocarbons, Kosmos said.

"Thanks for 'bearing' with me all these years… especially my super clever comedy #happybirthdaymaks," he captioned another photo of the duo standing beside a large, stuffed bear.

Cue sifu-student training montages and Ren's evolution from a defiant delinquent to a warrior of noble bearing, with shrill intermittent humor sequences of Ren and Kumatetsu bickering.

While aristocratic in his bearing, with a large gray beard, Mongiardino was rather ascetic in his habits: He lived alone, rarely received visitors and never ate at home.

Share with your team, "Here's why I know that sucks" or "I so appreciate you bearing with this" and you demonstrate how much you understand their point of view.

In Japan — which has a word, "gaman," that denotes a sense of bearing with it — the elderly are perhaps more susceptible than anyone to feeling they should simply put up with the heat.

There's always the chance Cousins fits in and the Pelicans simply re-sign him as Davis's long-term running mate, but that feels like a risk their front office can avoid bearing with this trade.

That never materialized, and Marconi never managed to pick up vibrations from alien life, but today GPS-guided drones and bombs keep their bearing with a nearly imperceptible radio signal originating from 12,000 miles in the sky.

LIESMAN: AND MR. SECRETARY, I'M JUST GOING TO USE THE PREROGATIVE TO ASK THE FINAL, FINAL, FINAL QUESTION AND I APPRECIATE YOUR BEARING WITH US. I'VE COVERED THE TREASURY FOR MANY YEARS, INTERVIEWED ALMOST EVERY TREASURY SECRETARY AND HONOR TO INTERVIEW YOU AS WELL.

One was about Trump's missteps on North Korea, one about child marriage remaining widespread in America, and several about guns and the N.R.A. In any case, thanks for bearing with me in 2018 and letting me use my Op-Ed real estate to inflict on you topics that I care deeply about, even if perhaps you don't.

Instead, a hydrostatic bearing with pumped oil flow may be used.

Cluster bearing with vigorous growth habit. Harvesting season is during May–June.

"Be completely humble and gentle; be patient, bearing with one another in love".

This drama is about how neighbours live in harmony together bearing with each other attitudes, and helping each other during times of trouble.

This system comprises multiple removable radial gliding pads in combination with an axial roller bearing. Schematic representation of a historical hybrid yaw bearing with axial rollers and radial gliding pads.

Kingsbury joined the Worcester Polytechnic Institute to continue pursuing his interest in lubrication. He secured expansions for laboratory facilities and funding to continue his tests on a centrally pivoted thrust bearing with the aid of his students.

Grows in a variety of climatic conditions. This variety is found to be cultivated largely in South India, especially Karnataka and Andhra Pradesh. Regular and heavy cluster bearing habit. Late bearing with harvesting season being June to August.

A similar pattern, with a cylindrical friction element, was used on Mercedes-Benz cars from 1928. The earlier Mercedes had used Hartford pattern. A form using a cylindrical roller bearing with a resilient race was patented in 1930.

The TCF series has the 2.138-litre TR4 engine. The engine is a straight-four, push rod, three-bearing, with wet liners. It has 9:1 compression and is very rigid. It was fitted with two H6 SU carburetors.

But a kindlier fate has interposed in > the person of Victoire. She has gone to the French Headquarters with the > story of his gallantry, and an officer of the French Staff arrives, bearing > with him the glorious Cross of Honour.

Just as Constantinople had been the Second Rome, Russia rose to become the Third. In that interpretation, the cowl functions almost as a baton in a footrace, being passed from one city to the next and bearing with it pre- eminence.

There are several common designs of ball bearing, each offering various performance trade-offs. They can be made from many different materials, including: stainless steel, chrome steel, and ceramic (silicon nitride (Si3N4)). A hybrid ball bearing is a bearing with ceramic balls and races of metal.

A long conical bearing with adjustable brasses was provided as shown. The joints of the coupling were tight so that it could be filled with oil. With this axle little trouble was experienced from the sharp curves.John H. White: The American Railroad Passenger Car, Part 2.

Horseshoe mount on the Hale telescope The Horseshoe mount overcomes the design disadvantage of English or Yoke mounts by replacing the polar bearing with an open "horseshoe" structure to allow the telescope to access Polaris and stars near it. The Hale telescope is the most prominent example of a Horseshoe mount in use.

All lubricants reacted with the oxygen, leading to fires and other failures. The solution was to lubricate the bearing with the oxygen. Although liquid oxygen is a poor lubricant, it was adequate, since the service life of the pump was just a few hours. The operating environment and service needs are also important design considerations.

She published her first article, Faulty Weight Bearing with Special Reference to the position of the Thigh and the foot in 1935. Thereafter, she published several research papers, book reviews, films and textbooks on prosthetic training,Brunnstrom, S., & Kerr, D. (1951). Leg Amputee: Pre-prosthetic Training. AJN, American Journal of Nursing, 51(5), 354.

The block-setting crane model was such an icon of Meccano that it was used as cover art for several publications: the 1930 Book of New Models, the 1947 No 3 set, and the post-war revised No 7 & 8 sets. This was despite none of these sets containing enough parts, or the roller bearing, with which to build it.

Queen Farida was born in a culture in which motherhood was the only priority of a woman. The birth of an heir to the throne was especially important. However, due to rising influence of the West, the role of the first lady rose to higher grounds. The first lady became an honorary title bearing with it duties of attending charities, fundraisers, commemorations and receiving foreign dignitaries.

The earth now under their possession, the amatsukami sent the "Heavenly Grandson" (天孫 tenson), Ame-no-oshihomimi's son Ninigi, to rule over Ashihara-no-Nakatsukuni,Chamberlain (1882). Section XXXIII.—The August Descent from Heaven of His Augustness the August Grandchild. bearing with him the three sacred treasures: the sword (Kusanagi no Tsurugi), the mirror (Yata no Kagami), and the jewel (Yasakani no Magatama).

The building is constructed of heavy, native stone and concrete with log beams supporting the roof. The structure's footprint is somewhat irregular because the building was designed to merge the cliff. The stone walls are load-bearing with rough rock exposed on the outer walls to blend with the surrounding landscape. In the 1930s, the building's roof was re-built with asphalt and lead flashing to stop leaking.

For a considerable length of time the above-mentioned rights exhibit the fulness of the vicar's authority. Special commissions, however, multiply in this period, bearing with them in each case a special extension or new application of authority. Under Pope Clement VI (1342–52) the territory of the vicar- general's jurisdiction was notably increased by the inclusion of the suburbs and the rural district about Rome.Reg. Vat., tom.

The basic LPB tool is a ball, wheel or other similar tip that is supported in a spherical hydrostatic bearing. The tool can be held in any CNC machine or by industrial robots, depending on the application. The machine tool coolant is used to pressurize the bearing with a continuous flow of fluid to support the ball. The ball does not contact the mechanical bearing seat, even under load.

They raced two more times in 2000, finishing 11th at Indianapolis Raceway Park and 33rd at Gateway Motorsports Park, where the team suffered their first DNF due to a faulty wheel bearing. With their initial success the team decided to go full-time in 2001. The season started out great, with three top five finishes in their first four starts. Unfortunately the wheels fell off the campaign after that.

Kids from Shaolin, also known as Shaolin Temple 2: Kids from Shaolin, is a 1984 Hong Kong–Chinese kung fu comedy film directed by Chang Hsin-yen. It stars Jet Li, Yu Chenghui, Yu Hai and Ding Lan from the original 1982 Shaolin Temple film, which is also directed by Chang. However, the plot has no bearing with the first movie and hence Kids from Shaolin is a sequel to the original in name only.

The Herculean repair involved an in water screw removal and the use of a floating crane towed in from Pearl Harbor Naval Shipyard. For nine weeks Houston was stuck in port while a special team from Pearl Harbor repaired the stern tube bearing. With her screw replaced, Houston returned to her sea duties in late August 1994. The ship returned home to San Diego in time for her crew to enjoy the 1994 holiday season.

Some of them, including a part of the Tectosages, would cross the Hellespont and settle in Galatia. The rest were thought to have returned to their homelands in southern Gaul, bearing with them the treasures of Greece. Junianus Justinus, excerpting the work of Gnaeus Pompeius Trogus, claims that those Tectosages who returned to Tolosa suffered "a pestilential distemper" that was not dispelled until after they had thrown their plunder into the lakes.

Orson Welles and Chicago-born actress and socialite Virginia Nicolson (1916–1996) were married on November 14, 1934. The couple separated in December 1939 and were divorced on February 1, 1940. After bearing with Welles's romances in New York, Virginia had learned that Welles had fallen in love with Mexican actress Dolores del Río. Infatuated with her since adolescence, Welles met del Río at Darryl Zanuck's ranch soon after he moved to Hollywood in 1939.

The Hubscher maneuver (or Jack's test) is a method of evaluating the flexibility of a pes planus or flat foot type. The test is performed with the patient weight bearing, with the foot flat on the ground, while the clinician dorsiflexes the hallux and watches for an increasing concavity of the Arches of the foot. A positive result (arch formation) results from the flatfoot being flexible. A negative result (lack of arch formation) results from the flatfoot being rigid.

Cross section of a wire race bearing with ground inner and outer rings A wire race bearing is a rolling-element bearing, where the balls or rollers run on races resembling loops of wire. Roller bearings may use just two races, but ball bearings typically use three or four races. Wire race bearings can be large yet lightweight and with small profile and good precision. Wire races have little intrinsic structure and must be adequately supported by the bearing housing.

Anárion and his family escaped down the Anduin by boat, bearing with them a seedling of the tree. They sailed to Lindon, seeking the Elven King Gil-galad and Elendil in Arnor. Anárion bought time for Gondor by defending Osgiliath and driving the Dark Lord back to the mountains, while Elendil and Gil-galad marshalled their forces. As told in The Fellowship of the Ring, Isildur returned with Elendil and Gil-galad in the Last Alliance of Elves and Men.

This was trialled on in February 1943. Performance was thought to be adequate, but Hedgehog was already well-established and the next generation, Squid, was almost ready for its trials on Ambuscade in May. Fairlie's main work up to this time had returned to ASDIC, with the Type 144Q ASDIC in late 1942, then the separate Type 147. The Q attachment gave a paper recording of the target bearing, with a much narrower beam in plan view than the 144 set.

Eternal were anger and ignorance > in his mind. And the king habitually drank liquor and pleased himself by > having intercourse with the female children not yet attaining the age of > menstruation. In this respect, if any female was able to endure him, that > female would be granted a great amount of rewards, money, gold, silks and > other cloth. Should any female be incapable of bearing with him, he would be > enraged and strike a sword at her heart, putting her to death.

Night lizards (family Xantusiidae) are a group of small scincomorph lizards, averaging from less than to over snout–vent length. Most species are viviparous (live-bearing), with the exception of those in the genus Cricosaura. The family has only three living genera, with approximately 34 The Reptile Database: Xantusiidae living species. The genera are divided by geographic range: Xantusia in southwestern North America and Baja California, Cricosaura in Cuba, and Lepidophyma, the most populous night lizard genus, in Central America.

BORAP is an ELINT/ESM system designed and developed by the ERA company in the Czech Republic, manufacturers of the VERA system. BORAP is designed for the detection, identification, location and tracking of air, ground and naval targets using an advanced wideband interferometric direction finding technique complemented with a high performance ELINT analysis subsystem. Two or more BORAP stations locate emitters through triangulation. It can alternatively be used in combination with VERA systems to locate targets by the intersection of lines of bearing with hyperbola.

The innovation was a 'sense' aerial, which, when switched in, suppressed the ellipse in the 'wrong' direction leaving only the correct bearing. With this there was hardly any need to triangulate—the escort could just run down the precise bearing provided, estimating range from the signal strength, and use either efficient look-outs or radar for final positioning. Many U-boat attacks were suppressed and submarines sunk in this way—a good example of the great difference apparently minor aspects of technology could make to the battle.

Even basic materials can have good durability. As examples, wooden bearings can still be seen today in old clocks or in water mills where the water provides cooling and lubrication. Timken tapered roller bearing with notched rollers The first patent for a radial style ball bearing was awarded to Jules Suriray, a Parisian bicycle mechanic, on 3 August 1869. The bearings were then fitted to the winning bicycle ridden by James Moore in the world's first bicycle road race, Paris-Rouen, in November 1869.

The second advance was the introduction of the automatic direction finder (ADF), which completely automated the RDF procedure. Once an ADF system was tuned to a station, either an airway beacon or an AM radio station, they continually moved a pointer to indicate the relative bearing with no further operator involvement. B–T, and rotating loops of various sorts, continued to be used in the post-war era by civilians. Improvements continued to be made to both systems throughout this period, especially the introduction of solenoids in place of conventional loops in some roles.

Cylindrical form journal bearings with a herringbone pattern of spiral grooves gives a bearing with excellent load capacity, resistance to cavitation and excellent stability. Spiral groove journal and thrust bearings using air as a lubricant. The symmetric herringbone pattern has zero flow which reduces the possibility of entraining dirt into the bearing, but spiral groove journal bearings are also found with a single pattern that produces a through flow of lubricant. This feature has been used to produce a known volume of flow for constant-flow diesel-pump metering systems.

Diagram showing principle of constant bearing, decreasing range in marine collision avoidance. When an observer sees another vessel at a constant bearing and the range continually decreases, collision is imminent. A ship seen to be on a constant bearing with decreasing range will collide with the observer's ship unless avoiding action is taken. Constant bearing, decreasing range (CBDR) is a term in navigation which means that some object, usually another ship viewed from the deck or bridge of one's own ship, is getting closer but maintaining the same relative bearing.

It weighs 95 tonnes, with a box steel section deck, supported by three cables, keeping the overall structural slender. The bridge swings on a pintle bearing, with a central wheel to support its weight. Construction began in August 2007 and the Bridge opened to the public on 20 March 2009, then was officially opened on 2 April 2009, a year behind schedule, by the Mayor of Derby. The bridge, designed by Ramboll, was partly inspired by tailor's shears and has an iconic needle-shaped mast, to echo the heritage of the nearby Silk Mill.

Size comparison: Child in wind turbine rotor hub without blades One row four point contact ball bearing with gear spur for the pitch drive Mostly large rolling element bearing are used as pitch bearings. The bearing is subjected to high bending moments, radial and axial loads in both directions. Therefore, the rolling elements for state of the art wind turbines are ball bearings, which are used in a double rowed four-point contact. This means each raceway carries on two points, and in sum four points are carrying.

A pillow block usually refers to a housing with an included anti-friction bearing. A pillow block refers to any mounted bearing wherein the mounted shaft is in a parallel plane to the mounting surface, and perpendicular to the center line of the mounting holes, as contrasted with various types of flange blocks or flange units. A pillow block may contain a bearing with one of several types of rolling elements, including ball, cylindrical roller, spherical roller, tapered roller, or metallic or synthetic bushing. The type of rolling element defines the type of pillow block.

3, Ceremonial Banquets, p.61-; 66- the remnant of which is the exchanged between the groom in the bride in traditional Japanese weddings. A typical pattern is , which may refer to three trays bearing with 7, 5, and 3 dishes, though there seems to be different interpretations, and others have suggested this indicates the triple round of drinks, followed by 5 rounds, then by 7 trays. The meals for guests are served on , where the tray (technically called ) is supported underneath by a boxlike frame with three of the sides hollowed by large holes.

An axial homopolar electrodynamic bearing With the use of an induction-based levitation system present in maglev technologies such as the Inductrack system, magnetic bearings could replace complex control systems by using Halbach Arrays and simple closed loop coils. These systems gain in simplicity, but are less advantageous with regard to eddy current losses. For rotating systems it is possible to use homopolar magnet designs instead of multipole Halbach structures, which reduce losses considerably. An example that has bypassed the Earnshaw's theorem issues is the homopolar electrodynamic bearing invented by Dr Torbjörn Lembke.

Radial run-out is the result of a rotating component running off centre, such as a ball bearing with an offset centre. This means that the rotating tool or shaft, instead of being centrally aligned, will rotate about a secondary axis. In general, cutting tools are more tolerant of radial run-out since the edges are parallel to the line of cutting tending to keep the tool tip aligned. However, a rotating shaft may be less tolerant of radial run-out since the centre of gravity is displaced by the amount of run-out.

The life of Mycroft Holmes's fellow lodger is saved by this minor criminal act. Gregson last appears in Doyle's "The Adventure of the Red Circle" in events that happen in 1902 but are not published by Dr Watson until 1911. In this story, Watson observes that: > Our official detectives may blunder in the matter of intelligence, but never > in that of courage. Gregson climbed the stair to arrest this desperate > murderer with the same absolutely quiet and businesslike bearing with which > he would have ascended the official staircase of Scotland Yard.

It also absorbs small, fast speed variations, caused by "cogging", which in other designs are heard as "flutter." The "Acoustical professional" turntable (earlier marketed under Dutch "Jobo prof") of the 1960s however possessed an expensive German drive motor, the "Pabst Aussenläufer" ("Pabst outrunner"). As this motor name implied, the rotor was on the outside of the motor and acted as a flywheel ahead of the belt-driven turntable itself. In combination with a steel to nylon turntable bearing (with molybdenum disulfide inside for lifelong lubrication) very low wow, flutter and rumble figures were achieved.

Kingsbury's research at the University of New Hampshire led him to conceive an early Kingsbury bearing that consisted of several stationary arc segments facing a thrust collar on the rotating shaft. Each segment would have a boss on the side away from the thrust collar, allowing it to tilt and form an oil wedge that would carry the thrust. Kingsbury tested this new bearing with a modified version of his earlier screw thread testing machine. The bearing was successful with pressures of up to 4,000 psi at speeds of 285 rpm.

Lift frogs are used in turnouts where the through (straight) route is heavily used, and the diverging (curved) route is only used on occasion and at low speed. The frog is tread-bearing, with a normal rail surface, on the through route, and is flange-bearing on the diverging route. The name is derived from the wheel on the diverging rail being lifted over the through rail. No guard rail is required on the through route, but is critical on the diverging route to keep rail vehicles in gauge.

These fault frequencies are sometimes masked by adjacent frequencies in the spectra due to their little energy. Hence, a very high spectral resolution is often needed to identify these frequencies during a FFT analysis. The natural frequencies of a rolling element bearing with the free boundary conditions are 3 kHz. Therefore, in order to use the bearing component resonance bandwidth method to detect the bearing fault at an initial stage a high frequency range accelerometer should be adopted, and data obtained from a long duration needs to be acquired.

Nozzle-air bearing with chambers and channels With conventional single nozzle aerostatic bearings, the compressed air flows through a few relatively large nozzles (diameter 0.1 – 0.5 mm) into the bearing gap. The gas consumption thus allows only some flexibility such that the bearing's features (force, moments, bearing surface, bearing gap height, damping) can be adjusted only insufficiently. However, in order to allow a uniform gas pressure even with only some nozzles, aerostatic bearing manufacturers take constructive techniques. In doing so, these bearings cause dead volumes (non-compressible and thus weak air volume).

The pope, unable to contain himself longer, puts the mask aside and embraces his father. He is anxious to return to the religion of his fathers, and his resolve is strengthened as his father points out to him the Jewish doctrine concerning the regenerative power of repentance. Simeon then returns to Mainz, bearing with him a repeal of the edict, while Elhanan stays in Rome long enough to compose an anti-Christian dissertation, which he charges all his successors to peruse. He then flees to Mayence, where he lives as a pious Jew.

His most notable involvement in any naval activity was actually on the sidelines: when Lt. George Washington De Long and James Gordon Bennett Jr. set up the USS Jeannette Expedition to the North Pole in 1879, Thompson gave some advice to the preparations, but seemed determined to watch the extent of Government involvement in the project. His waffling (about escort vessels and later rescue vessels) were somewhat irritating. While not responsible for that tragedy, Thompson certainly did not help matters by his hair-splitting legalisms. In 1880 a new matter arose that had a bearing with Thompson leaving his post.

In a simple bistatic configuration (one transmitter and one receiver) it is possible to determine the location of the target by simply calculating the point of intersection of the bearing with the bistatic-range ellipse. However, errors in bearing and range tend to make this approach fairly inaccurate. A better approach is to estimate the target state (location, heading and speed) from the full measurement set of bistatic range, bearing and Doppler using a non- linear filter, such as the extended or unscented Kalman filter. When multiple transmitters are used, a target can be potentially detected by every transmitter.

The Pattern 2 Drors had many changes from the first one by adapting to a rimless round and the use of modified 20-round BAR LMG magazines to balance the weapon. In addition, the barrel release was now located at the front barrel bearing with a heat shield, which is colored orange/brown, that can be removed without the need of using protective gloves. A folding cover is also mounted over the magazine well so that the gunner can close it to prevent dirt and other foul elements from going inside when the weapon is not used.

Plain bearing on a 1906 S-Motor locomotive showing the axle, bearing, oil supply and oiling pad An early pillow block bearing with a whitemetal plain bearing A plain bearing, or more commonly sliding bearing and slide bearing (in railroading sometimes called a solid bearing, journal bearing, or friction bearing), is the simplest type of bearing, comprising just a bearing surface and no rolling elements. Therefore, the journal (i.e., the part of the shaft in contact with the bearing) slides over the bearing surface. The simplest example of a plain bearing is a shaft rotating in a hole.

If the bowl (called an "umbrella") is not centered above the exciter coil, either or both coils have an output that represents the offset. This voltage is phase- detected and amplified to drive two DC servo motors to position the umbrella in line with the coil. The umbrella support gimbals rotate in bearing with the gun director, and the servo motors generate level and crosslevel stabilizing signals. The Mk. 1A's director bearing receiver servo drives the pickoff gimbal frame in the stable element through a shaft between the two devices, and the Stable Element's level and crosslevel servos feed those signals back to the computer via two more shafts.

Section through a bearing, showing the oil sump beneath (green) and the ring oiler (orange) in place around the shaft Section though a long Babbitt metal sleeve bearing, with two ring oilers fitted through grooves in the upper part of the bearing. A ring oiler or oil ring is a form of oil-lubrication system for bearings. Ring oilers were used for medium-speed applications with moderate loads, during the first half of the 20th century. These represented the later years of the stationary steam engine, and the beginnings of the high-speed steam engine, the internal combustion oil engine and electrical generating equipment.

Spherical plain bearing Spherical bearing with rolling elements at the contact surface A spherical plain bearing is a bearing that permits angular rotation about a central point in two orthogonal directions (usually within a specified angular limit based on the bearing geometry). Typically these bearings support a rotating shaft in the bore of the inner ring that must move not only rotationally, but also at an angle. Self-aligning spherical bearings were first used by James Nasmyth around 1840 to support line shaft bearings in mills and machine shops. For long shafts it was impossible to accurately align bearings, even if the shaft was perfectly straight.

The facade was designed to be load-bearing, with the panels on the second, third, and fourth floors designed to carry the weight of the building. The window frames on the eighth, ninth, and tenth floors were slightly thinner, because although they were not load-bearing they had to contain HVAC piping. The panels on the middle floors required the least amount of fabrication, according to architect Herbert Beckhard (an associate in Breuer's firm who helped design the building), as they did not need to bear as much load nor contain much piping. The windows do not meet at the corner of the concrete frame.

The Hale Telescope uses a special type of equatorial mount called a "horseshoe mount", a modified yoke mount that replaces the polar bearing with an open "horseshoe" structure that gives the telescope full access to the entire sky, including Polaris and stars near it. The optical tube assembly (OTA) uses a Serrurier truss, then newly invented by Mark U. Serrurier of Caltech in Pasadena in 1935, designed to flex in such a way as to keep all of the optics in alignment.Encyclopedia of Astronomy and Physics, "Reflecting Telescopes", Paul Murdin and Patrick Moore Theodore von Karman designed the lubrication system to avoid potential issues with turbulence during tracking.

All species are pod-bearing, with sap and leaves often bearing large amounts of tannins and condensed tannins that historically found use as pharmaceuticals and preservatives. The genus Acacia constitutes, in its traditional circumspection, the second largest genus in Fabaceae (Astragalus being the largest), with roughly 1,300 species, about 960 of them native to Australia, with the remainder spread around the tropical to warm-temperate regions of both hemispheres, including Europe, Africa, southern Asia, and the Americas (see List of Acacia species). The genus was divided into five separate genera under the tribe "Acacieae". The genus now called Acacia represents the majority of the Australian species and a few native to southeast Asia, Réunion, and Pacific Islands.

The precision Sleeve rotating in the bushing on an unbroken film of oil provides a Bearing with a low coefficient of friction, low power consumption, high load capacity, high stiffness, and freedom from wear and fatigue. Adjacent to the outbound end of the sleeve is the Thrust Bearing, which is typically a double acting roller (or ball bearing in some applications depending on the size of the radial bearing). The Thrust Bearing is mounted in such a manner that it only carries the thrust load and is not subject to any radial loading. These principal bearing components are assembled in a Chock with a Sleeve Ring, Chock End Plate, End Cover and inboard sealing arrangement.

Troude, vol.2, p.66 ;Action On 23 February, off the island of Madeira, the convoy met Rodney's fleet; Duchilleau ordered Ajax to double back with most of the convoy, while he would lure the British by continuing on the same bearing with Charmante and the smallest ships of the convoy. The British fleet chased Protée while Ajax escaped with the convoy; seeing the ships under his protection out of harm's way around 1am, Duchilleau tried to effect his own escape, but Protée caught the wind, breaking her tops and mizzen, allowing , under Lord Robert Manners, to catch on around 2am, soon joined by the 74-gun HMS Bedford and HMS Marlborough.

Shared innovations, acquired by borrowing or other means, are not considered genetic and have no bearing with the language family concept. It has been asserted, for example, that many of the more striking features shared by Italic languages (Latin, Oscan, Umbrian, etc.) might well be "areal features". However, very similar-looking alterations in the systems of long vowels in the West Germanic languages greatly postdate any possible notion of a proto- language innovation (and cannot readily be regarded as "areal", either, since English and continental West Germanic were not a linguistic area). In a similar vein, there are many similar unique innovations in Germanic, Baltic and Slavic that are far more likely to be areal features than traceable to a common proto-language.

Each cylinder aspirated through two valves operated by single overhead cam-shafts with ignition from two spark plugs set on opposite sides of the combustion chamber supplied by magnetos at the rear of the engine. Fuel metering was carried out by nine carburetors each supplying two cylinders. Construction of the 18R was largely of Elektron magnesium alloy for body components with high strength steels for highly loaded parts such as the crankshaft. In common with many multiple bank and radial engines the pistons were connected to the crankshaft via master and slave connecting rods; the central vertical bank was served by the master rod which housed the big-end bearing with connecting rods articulating from this to the other two banks.

""Pierre Bayle", Stanford Encyclopedia of Philosophy, updated August 19, 2008. Accessed March 6, 2011 Bayle was repelled by the use of scripture to justify coercion and violence: "One must transcribe almost the whole New Testament to collect all the Proofs it affords us of that Gentleness and Long- suffering, which constitute the distinguishing and essential Character of the Gospel." He did not regard toleration as a danger to the state, but to the contrary: "If the Multiplicity of Religions prejudices the State, it proceeds from their not bearing with one another but on the contrary endeavoring each to crush and destroy the other by methods of Persecution. In a word, all the Mischief arises not from Toleration, but from the want of it.

In both cases, the supply of oil is proportional to the speed of the locomotive. Big-end bearing (with connecting rod and coupling rod) of a Blackmoor Vale showing pierced cork stoppers to oil reservoirs Lubricating the frame components (axle bearings, horn blocks and bogie pivots) depends on capillary action: trimmings of worsted yarn are trailed from oil reservoirs into pipes leading to the respective component. The rate of oil supplied is controlled by the size of the bundle of yarn and not the speed of the locomotive, so it is necessary to remove the trimmings (which are mounted on wire) when stationary. However, at regular stops (such as a terminating station platform), oil finding its way onto the track can still be a problem.

Three types of ball bearing were used over the engine's life: dual-row ball until 1999 and in some 2000 and 2001 cars. Starting in model year 2000, Porsche began phasing out the dual row ball bearing and went to a smaller single row ball bearing, with significantly less load capacity. From MY 2006 through 2008 the IMS bearing was replaced with a larger single row bearing that cannot be replaced safely without engine disassembly. In 2009, Porsche introduced the completely new 9A1 engine that eliminated the intermediate shaft and drives the camshafts directly from the crankshaft, returning to their previous flat six engine topology of having two separate cylinder head castings and running all the ancillaries and timing chains from the rear facing side of the engine.

IV, Edinburgh-Scotland, Thomas C. Jack, Grange > Publishing Works, retrieved from Google Books 2009-03-18; A misunderstanding could arise because the term "rhumb" had no precise meaning when it came into use. It applied equally well to the windrose lines as it did to loxodromes because the term only applied "locally" and only meant whatever a sailor did in order to sail with constant bearing, with all the imprecision that that implies. Therefore, "rhumb" was applicable to the straight lines on portolans when portolans were in use, as well as always applicable to straight lines on Mercator charts. For short distances portolan "rhumbs" do not meaningfully differ from Mercator rhumbs, but these days "rhumb" is synonymous with the mathematically precise "loxodrome" because it has been made synonymous retrospectively.

Gravelot illustration of Aaron cutting off Titus's hand in Act 3, Scene 1; engraved by Gerard Van der Gucht (1740) The play begins shortly after the death of the Roman emperor, with his two sons, Saturninus and Bassianus, squabbling over who will succeed him. Their conflict seems set to boil over into violence until a tribune, Marcus Andronicus, announces that the people's choice for the new emperor is Marcus's brother, Titus, who will shortly return to Rome from a victorious ten-year campaign against the Goths. Titus subsequently arrives to much fanfare, bearing with him as prisoners the Queen of the Goths (Tamora), her three sons (Alarbus, Chiron, and Demetrius), and Aaron the Moor (her secret lover). Despite Tamora's desperate pleas, Titus sacrifices her eldest son, Alarbus, to avenge the deaths of his own sons during the war.

After completing her doctorate, Butler became a postdoctoral researcher and then, a year later, an assistant professor at Princeton University. However, at Princeton she encountered much of the same explicit sexism that had tormented her at MIT. One faculty member in her department assumed she was a secretary and handed secretarial work to her, and she was the target of comments about the incompatibility of child-bearing with mathematics, or remarks to her like "I really do feel women are genetically inferior in math", to the point that she says she "locked myself in my office and didn't come out for four years". Despite marrying Princeton computer scientist F. Miller Maley, she moved in 1991 from Princeton to Haverford College, where she had a potential collaborator on the faculty and could find a more collegial atmosphere.

Sven Wingqvist, one of the founders of SKF SKF office in Montreal, Quebec, Canada in 1940 SKF self-aligning ball bearing Sven Wingqvist, at the time a thirty- year-old plant engineer responsible for repairs and maintenance at Gamlestadens Fabriker, was dissatisfied with the performance of the ball bearings then in use. These were rigid ball bearings, imported from Germany, and if the long shafts on the machinery in a textile mill were the least bit misaligned, the ball bearings would become overheated and break down, bringing production to a costly halt. In spring 1907, Wingquist presented a breakthrough: a double row self-aligning ball bearing with a spherical raceway in the outer ring, shared by both rows of balls. This allowed the inner ring to align freely in relation to the outer ring, with no negative impact on the function of the bearing.

In May 2009, French indie game developer Mobigame had their iOS title Edge removed from Apple's App Store in the US and the UK due to lawsuit threats by Tim Langdell. According to Mobigame, the dispute arose while they were trying to register a trademark for Edge in the US, while Langdell claims he owns the global trademark on "Edge". According to the email dialogue between Langdell and Mobigame head David Papazian, shared with Eurogamer, Langdell delivered an ultimatum to Mobigame in exchange for a promise not to litigate. If they changed the game's name, he demanded 25% of the game's revenue for the time the title was on sale under the name "Edge", and if they licensed the Edge name, they would give him 10% of the game's revenue in perpetuity and subtitle it "An Homage To Bobby Bearing", with the Edge Games logo on the title screen.

On the other hand, he was not so progressive that he felt himself in any way connected to those he called, in 1855, "red democrats" (that is to say socialists and other political radicals), whom he separated from "the decent-minded", with which he meant the progressive, liberal section of the settled middle class, to which he himself belonged. In 1827, Halbertsma became a member of the Provinciaal Friesch Genootschap ter Beoefening van Friesche Geschied-, Oudheid- en Taalkunde ("Provincial Frisian Society for the Study of Frisian History, Antiquities and Linguistics"), but in 1834, he cancelled his membership because he felt this club was full to the rafters with silly people.Van der Schaaf, p. 38 He could not stomach the affected poshness of the middle class gentlemen, and neither could he reconcile such graveness of bearing with the 'gluttony and wine-guzzling' which followed the gatherings.

The city of 's-Hertogenbosch (Hertzogenbusch, Sylva Ducis) was founded in 1184, but with the surrounding territory, was included in the Diocese of Liège until 12 March 1561. At that time, to check the spread of Protestantism, Pope Pius IV raised it to the dignity of a see, and made it suffragan to the archdiocese of Mechelen. The first bishop was the theologian Francis Sonnius (1562–69), afterwards transferred to the see of Antwerp. His successors suffered in the political disorders and wars of the last quarter of the 16th-century. When after a long siege the city was captured by Prince Frederick Henry (14 September 1629) and held in the name of the States-General, the sixth bishop, Michael Ophovius, was obliged to abandon his see, which he did in a solemn procession, surrounded by his clergy, and bearing with him a famous miraculous statue of the Blessed Virgin which he placed in safety at Brussels.

A further level of integration of shaft rotations by either electronic means or by mechanical means, such as a Ball-and-disk integrator, can record the displacement or distance traveled, this latter mechanical method being used by early guidance systems prior to the availability of suitable digital computers. In most implementations of the PIGA the gyroscope itself is cantilevered on the end of the pendulum arm to act as the pendulous mass itself. Up to three such instruments may be required for each dimension of an INS with the three accelerometers mounted orthogonally generally on a platform stabilized gyroscopically within a system of gimbals. Image:PIGA_accelerometer_1.png A critical requirement for accuracy is low static friction (stiction) in the bearings of the pendulum; this is achieved by various means ranging from double ball bearing with a superimposed oscillatory motion to dither the bearing above its threshold or through the use of gaseous or fluid bearings or by the alternative method of floating the gyroscope in a fluid and restraining the residual mass by jewel bearings or electromagnetic means.