Sentences Generator
And
Your saved sentences

No sentences have been saved yet

173 Sentences With "at 90 degrees"

How to use at 90 degrees in a sentence? Find typical usage patterns (collocations)/phrases/context for "at 90 degrees" and check conjugation/comparative form for "at 90 degrees". Mastering all the usages of "at 90 degrees" from sentence examples published by news publications.

type: All Declarative Interrogative Exclamative

structure: All Simple Compound Complex Compound-Complex

length: All <=10 words 10-20 words 20-30 words 30-50 words

It can also stay propped at 90 degrees for things like video chat.
Your arms should be at 90 degrees; your monitors should be at or slightly below eye level.
At 90 degrees to the command centre of the desk was a typewriter with the blank paper set.
Then, when the hair is dry, comb it straight out, at 90 degrees from the scalp, to create the desired form.
It was a scorcher for late April, peaking at 90 degrees—the hottest temperature on record for D.C. at this time of year.
The head shaking among longtime locals really began on the Fourth of July, when at 90 degrees, Anchorage was hotter than Key West.
At the moment, it's located four degrees south of the geographic North Pole, which lies in the Arctic Ocean at 90 degrees north.
When upright it is set at almost at 90 degrees – a TV lounging nightmare – and when slightly reclined you fall into a napping position.
Bring your legs into that same tabletop position and — keeping your knees bent at 90 degrees — lower your right heel to tap the ground.
An elbow cocked at 90 degrees, finger pointing skyward and looping, she noted, could mean either to close the tab or bring another round.
The first test, in 2015, looked at the rocket's performance at 90 degrees Fahrenheit, the warmest the booster can be to successfully launch, NASA said.
The titanium rail around the phone is squared off at 90 degrees with just enough of a curved edge to keep it from biting your hand.
On the Fourth of July, Anchorage was hotter than Key West at 90 degrees, setting a new all-time record, according to the National Weather Service.
Every single tree on the previously green islands has been stripped of its leaves, leaving endless postnuclear forests with their remaining trunks bent at 90 degrees as a memory of the wind's direction.
Lounging alone, catching your breath and pausing, still wearing one's coat, flopped on the couch, legs bent at 90 degrees, bag cross-bodied and buckling you in, is the best part of the day.
Targets: quads and hip flexors How to Do it: Step forward with right leg, dropping into lunge with both legs at 90 degrees, and bring left arm forward, so that it is also at a 90-degree angle.
You might even want to invest in a "stool stool," pelvic physiotherapist Elaine Miller explains: Sitting with hips at 90 degrees means the puborectalis muscle is not relaxed, which means the kink in the upper rectum does not straighten out.
Weinbach says the Z Flip will actually be able to do something like what Samsung teased, as it might be able to lock at 90 degrees so you can use the bottom half of the phone to support the top half.
Steel Vengeance boasts 10 world records, according to the park's website, including world's fastest hybrid roller coaster at 74 miles per hour, world's steepest drop on a hybrid roller coaster at 90 degrees and world's longest drop on a hybrid roller coaster at 200 feet.
This kind of boat existed in the past, with twin keels, so I said, 'Let's make a kind of twin keel but with foils, not too heavy, just enough so we can right it up at 90 degrees when we cant it the correct way.
Every time someone on the red carpet is asked who he or she is wearing … Do a 30-second wall ball blaster With your back against the wall and your legs and knees at 90-degrees, walk your feet out enough so that your weight is in your heels.
You can even make a DIY standing desk if you don't have the space or resources for a real one; just be sure to keep your computer monitor at eye level, and your arms bent at 90 degrees to reach the keyboard, to avoid neck and arm pain.
What if, they conjectured, the ''road'' isn't a single wave reflecting back and forth between every possible combination of atolls and islands; what if it is the path you take if you keep your vessel at 90 degrees to the strongest swell flowing between neighboring bodies of land?
Mass timber refers to a variety of different types of engineered wood components, the most common being cross-laminated timber (known as CLT) and nail-laminated timber (or NLT), in which multiple layers of wood planks, stacked at 90 degrees, are glued or nailed together under pressure to form structural panels.
The plane took off from Paris at 11:92683 PM local time Wednesday night, and was last in radio contact with Greek air traffic controllers at 2:26 AM. According to Greek Defense Minister Panos Kammenos, everything seemed to be going smoothly when, just a few miles into Egyptian airspace, the plane made a left turn at 90-degrees and then a full circle right, plummeting from 37,000 feet to 15,000 feet, and then down to 9,000 feet, before vanishing from radar.
The ones that insist on having the same density of fuse wire and stick out at 90 degrees from your head.
'We called her the inventor of the 89 degrees. Nothing was ever at 90 degrees. She had spectacular vision. All the buildings were exploding into tiny little pieces.
Mineral Data Publication. Tucson, Arizona. The symmetry reveals that this mineral is composed of 3 axes of unequal lengths. Two of the axes are perpendicular at 90 degrees, while one axis intersects at an angle less than 90 degrees.
Double cabriole derrière. (; meaning 'caper.') An allegro step in which the extended legs are beaten in the air. Cabrioles are divided into two categories: petite, which are executed at 45 degrees, and grande, which are executed at 90 degrees.
This appears to be due to the pre-existence of the kitchen, which may (along with a previous attached timber building) have been built at 90 degrees to a dirt road that had altered when the road was later formalised with stone gutters.
Another outbuilding has been interpreted as a corn-drying room.Turner (1998) p. 104. Later houses were built at 90 degrees to the longhouse and these are of a type and size that is similar to croft houses that were common in Shetland until the mid-19th century.
The leaf margin can sometimes have minute hairs lining it. The leaves are simple and arranged oppositely with pairs alternating at 90 degrees along the branch (decussate). The leaf bud has no gap at the base. The flowers are white, in a raceme spike up to 11 cm long.
The 40 mm guns had a ceiling of at 90 degrees elevation and a maximum rate of fire of 160 rounds per minute.Campbell, pp. 147–149 The 20 mm gun had a rate of fire of 465–480 rounds per minute; they had a ceiling of .Campbell, pp.
The difference in height between the base and the fence is to allow for the offset of the blade in the hand plane. The purpose of the fence is to guide the plane along the edge of the board being planed such that the blade in the plane is presented at 90 degrees to the base of the shooting board. Assuming that the sides of the hand plane being used are perpendicular to the sole, this ensures an edge that is at 90 degrees to the face of the board. For end grain trimming, the board is placed on the shooting board so that an edge adjacent to the end to be trimmed is hard against the stop.
Youth theatre and musicals alternate every year. One-acts take place each spring and are directed by senior students. Hordern Hall, designed by the school's first band director, houses the music facility. The hall includes a large rehearsal hall, in which none of the walls are at 90 degrees for acoustics.
Their shaft axes also intersect at this point, forming an arbitrary non-straight angle between the shafts. The angle between the shafts can be anything except zero or 180 degrees. Bevel gears with equal numbers of teeth and shaft axes at 90 degrees are called miter (US) or mitre (UK) gears.
Cluster consisted of four cylindrical, spin-stabilised spacecraft, powered by 224 watt solar cells. The spacecraft were to have flown in a tetrahedral formation, and were intended to conduct research into the Earth's magnetosphere. The satellites would have been placed into highly elliptical orbits; , inclined at 90 degrees to the equator.
This is the most common and conventional form of CNC Plasma Cutting. Producing flat profiles, where the cut edges are at 90 degrees to the material surface. High powered cnc plasma cutting beds are configured in this way, able to cut profiles from metal plate up to 150 mm thick.
There were sliding bearings to ease the negotiation of curves. The frame-mounted traction motors were dismountable from above for maintenance. The wheels were of the type used on steam locomotives with balance weights and cranks at 90 degrees. Above the frame was a central cab and a short bonnet at each end.
In this design, the cord plies are arranged at 90 degrees to the direction of travel, or radially (from the center of the tire). Radial tire construction climbed to 100% market share in North America following Consumer Reports finding the superiority of the radial design in 1968, and were standard by 1976.
In this example on the right, we have 4 coils connected in series on the stator and the field rotor has 4 poles. Both coils and poles are equally spaced. Each pole has opposite polarity to its neighbors which are angled at 90 degrees. Each coils also have opposite winding to its neighbors.
The New York roof hook is a firefighting tool used for multiple purposes including pulling and prying. Developed in the 1940s by FDNY Deputy Chief Hugh Halligan, the tool is composed of a long shaft with two triangular-shaped ends jutting in opposite directions. One is angled at 45 degrees, the other at 90 degrees.
The fourth metatarsal is beveled (slightly slopes to the side) compared to the rest of the foot. This is intermediate between Falcarius, which has no slope, and therizinosaurids, which have a fourth metatarsal angled at 90 degrees to the rest of the foot. None of the metatarsals are ginglymoidal, but the toe bones are.
Cracks Cracks form in materials to relieve stress: with 120 degree joints in elastic materials, but at 90 degrees in inelastic materials. Thus the pattern of cracks indicates whether the material is elastic or not. Cracking patterns are widespread in nature, for example in rocks, mud, tree bark and the glazes of old paintings and ceramics.Stevens, Peter. 1974.
If the patient is unable to perform this motion, the examiner can hold the humerus at 90 degrees of abduction and apply slight pressure to the distal forearm. If the patient's arm falls to their side, this also indicates a rotator cuff dysfunction. Inability to controllably lower the arm can indicate a rotator cuff dysfunction, most commonly the supraspinatus.
The grain of the maple was placed at 90 degrees to that of the mahogany. The "pancake"-like layers are clearly visible when looking at the edge of the guitar. This process is also known as "crossbanding", and was done to make use of less expensive and more readily available thinner mahogany. Crossbanding was phased out by 1977.
The helicopter flies towards the theodolite and is tracked by the telescope in elevation and azimuth. The helicopter flies immediately above the tripod (i.e. it is at zenith) when it changes direction and flies at 90 degrees to its previous course. The telescope cannot track this maneuver without a discontinuous jump in one or both of the gimbal orientations.
Gartland Type II fractures requires closed reduction and casting at 90 degrees flexion. Percutaneous pinning is required if more than 90 degrees flexion is required to maintain the reduction. Closed reduction with percutaneous pinning has low complication rates. Closed reduction can be done by applying traction along the long axis of the humerus with elbow in slight flexion.
Streptocarpella leaves can be decussate in arrangement (each pair of leaves at a node is at 90 degrees to the ones preceding or following it), or ternate (whorls of 3 leaves at each node). Some specimens may exhibit both on the same plant. Streptocarpella are grown as houseplants, hanging plants, and sometimes as bedding plants. These two Streptocarpus subgenera do not interbreed.
The Tee Weld Joint is formed when two bars or sheets are joined perpendicular to each other in the form of a T shape. This weld is made from the resistance butt welding process. It can also be performed by Extrusion Welding. Usually two flat pieces of poly are welded at 90 degrees to each other, and extrusion welded on both sides.
The building was constructed in the International Style that matured after World War II. The style is characterized by a square or rectangular footprint, a cubic "extruded rectangle" form, windows running in broken horizontal rows to form a grid, and façade angles set at 90 degrees. The building rises 388 feet (118 m) and comprises 28 floors. It is served by 11 elevators.
The classrooms in the eastern wing feature tall, narrow timber windows which pivot from a central fitting. The original verandah ceilings are lined with diagonal boarding on top of the rafters. Classroom walls and ceilings are lined internally with horizontal boarding. The northern wing has a separate teachers room set at 90 degrees to the main building and accessed from the front verandah.
The telescope was then used to determine the radiant points for meteors. This was possible as the echo rate is at a minimum at the radiant point, and a maximum at 90 degrees to it. The telescope and other receivers on the site, studied auroral streamers that were visible in early August 1947.Lovell, The Story of Jodrell Bank, p.
The shear vane test is used to determine the undrained shear strength of soft to medium cohesive soils.Dean, p. 60 This instrument usually consists of four plates welded at 90 degrees from each other at the end of a rod. The rod is then inserted into the soil and a torque is applied to it so as to achieve a constant rotation rate.
The biggest idol of Maa Durga in rock carvings is about 20 feet high. The carvings images date back to 15-16th centuries. Beautiful images are curved with a lot of dexterity on the rocky faces of Devtamura which is steep at 90 degrees. The hill ranges are covered with thick jungles and one can reach this abode of gods only after trekking through these jungles.
The aerodrome covered 287 acres consisting of a landing ground and six single-span end-opening General Service Flight Sheds arranged in pairs with their doors at 90-degrees to the landing ground. Technical buildings were set out behind these, followed by domestic accommodation close to Ermine Street. These were subdivided into smaller groups depending on rank. Accommodation for women was based around a Women's Hostel.
A separate brick office, originally for the principal, is accessed from the verandah of this wing. It is a gable roofed extension set at 90 degrees to the building with a single double-hung window. Sports oval, 2016 A brick toilet block stands to the east of the buildings. It is constructed of face brick with a hip roof and high-level louvred windows.
Polarizing microscope operating principle Polarized light microscopy can mean any of a number of optical microscopy techniques involving polarized light. Simple techniques include illumination of the sample with polarized light. Directly transmitted light can, optionally, be blocked with a polariser orientated at 90 degrees to the illumination. More complex microscopy techniques which take advantage of polarized light include differential interference contrast microscopy and interference reflection microscopy.
Cosworth DFV engine mounted in BT49C. The curved underside of the car can be seen beneath it. The Ford Cosworth DFV was produced by Cosworth in Northampton and had been used in Formula One since 1967. It is a 2,993 cc (183 cu in) normally aspirated four-stroke engine with two banks of four cylinders at 90 degrees to each other in a 'V8' configuration.
The intercept took place about 135 miles east of Hainan Island, in international airspace." He elaborated on the incident, saying that the Chinese jet: "crossed under the aircraft with one pass having only 50–100 feet separation. The Chinese jet also passed the nose of the P-8 at 90 degrees with its belly toward the P-8 Poseidon, believed to be displaying its weapons load- out.
The Zeta was, in essence, two Gamma R.C.15 V-12 engines coupled to a single crankshaft. The engine consisted of an aluminium crankcase with four cylinder banks, each mounted at 90 degrees, with six cylinders. Each cylinder had a single intake and exhaust valve, driven by dual camshafts, and two spark plugs.Pearce, 2017 The whole engine was designed to be fitted as a replaceable power pack.
Designed by Henry Royce, the Eagle XVI was a completely new design and unrelated to the earlier Eagle. The engine featured four banks of fore and aft staggered cylinder blocks with the banks arranged at 90 degrees to each other to form a perfect 'X'. The valve gear was operated by a single overhead camshaft and used four valves per cylinder. The crankcases and cylinder blocks were cast from aluminium alloy.
The exciter winding is located on the top; it is in fact a coil of a turning (rotary) transformer. This transformer induces current in the rotor without a direct electrical connection, thus there are no wires to the rotor limiting its rotation and no need for brushes. The two other windings are on the bottom, wound on a lamination. They are configured at 90 degrees from each other.
A wave turn, commonly found on Rocky Mountain Construction roller coasters, is a 90-degree banked turn that incorporates a small camelback hill. The airtime feature separates wave turns from typical banked turns. When a train banks either right or left into an inclined turn, it traverses an airtime hill while banked at 90 degrees. The element finishes with the train exiting in the opposite direction that it entered.
Contact area may depend on the normal force between the two objects due to deformation. The contact area depends on the geometry of the contacting bodies, the load, and the material properties. The contact area between the two parallel cylinders is a narrow rectangle. Two, non-parallel cylinders have an elliptical contact area, unless the cylinders are crossed at 90 degrees, in which case they have a circular contact area.
James 1914, pp. 7-8 Besides the aforementioned differences to the contemporary Renault V-8 air cooled aviation engines, the De Dion-Bouton 78 hp engine very closely resembled their design. It had eight cylinders arranged in two rows of four cylinders inclined at 90 degrees to each other. The propeller shaft was geared down from the crankshaft by spur gears and rotated at half the engine speed.
Posterior drawer test and tibial sag tests can determine the integrity of the posterior cruciate ligament. Similar to anterior drawer test, the knee should be flexed 90 degrees and the tibia is pushed backwards. If the tibia can be pushed posteriorly, then the posterior drawer test is positive. In tibial sag test, both knees are flexed at 90 degrees with the person in supine position and bilateral feet touching the bed.
The low level attack left no room for error. As he made his approach to the factory his aircraft suffered flak damage to the starboard wing and engine. The starboard wing dropped and he was flying at 90 degrees vertical from the ground, but he was able to pull it back. Regaining some control of his aircraft, he delivered his four 500 pound bombs on the Emmasingel vacuum tube works.
Suitable for medium wavy textures. Blended Elevation: The top section (bob section) is cut at 90 degrees while the side sections are cut 180 deg to the length of the top section. The occipital and nape sections are cut at 90 deg. In this form of layering there is an "elevated" group of layers formed due to shorter top section and then it blends with the softer side and back layers.
A F92 type train BVG Class F are trains that run on the Berlin U-Bahn. In West Berlin, the new F type followed the D and DL types. These trains were longer, built from light metal and had a different seating arrangement, with the two double seats at 90 degrees to the sides of the train. A test vehicle was built in 1973, it was scrapped in December 2006.
86-87 Lazarev's Mindovsky House became a statement of neoclassical reaction against "decadent art". The L-shaped structure extends over 32×44 meters. Its two main parts intersect at 90 degrees, while the streets actually cross at a sharper angle – this allowed placing a small garden in front of the corner rotunda hall, but the western facade with main entrance had to be tapered to fit into street boundary.
It has a double-reduction gearing system in the trucks. The traction motors are mounted at 90 degrees to the axles, and have bevel pinions on the armature shafts. These bevel pinions drive a larger bevel ring gear in a gear case. On one truck, the locking nut on the traction motor armature shaft came loose, and the bevel pinion jammed in the ring gear, locking up the truck.
The LN3-2A platform is a four-gimbal system (outer roll, pitch, inner roll and azimuth) allowing the airplane 360 degrees of rotation in all directions. The azimuth, pitch and outer roll gimbals use sliprings and brushes for electrical contacts to allow unlimited freedom. The inner roll gimbal provides a built-in redundancy to prevent a gimbal lock situation when the azimuth and outer roll gimbal axes become aligned at 90 degrees of pitch.
On 11 October 2013, the Government announced an order for six additional Urbos 3s to replace the Variotrams. All Urbos 3s from the additional order had entered service by the end of June 2015. The Urbos 3s are approximately 33 metres long and feature two double and two single doors on each side. The seats on the first batch are generally in the transverse configuration – at 90 degrees to the sides of the vehicle.
The design weight was reduced to compensate for the addition of climate-control air-conditioning equipment. Each was fitted with three double doors each side which had enhanced safety systems with obstacle detection interlocked with the traction system. Seats were generally in the transverse configuration – at 90 degrees to the sides of the vehicle. In 2014, the original external destination rolls were replaced with dot-matrix displays and digital voice announcements were installed.
The wheels were of the type used on steam locomotives, with balance weights and cranks at 90 degrees. On a sturdy frame there was a central cabin in which the two traction motors, which were dismountable from below, were placed. At the ends there were two short bonnets which contained the auxiliary equipment, including fans, rheostat, compressors and brake reservoirs, as well as a reversing switch for the selection of the direction of travel.
Ma Bu, known as "horse stance" or "horse-riding stance," is a fundamental stance found in nearly all styles of wushu. In actual attack and defense, Ma Bu is sometimes viewed as a transitional stance, from which a practitioner may quickly switch to other stances. The stance typically begins with the feet apart slightly wider than shoulder-width. The feet are parallel, straight forward, and the knees are bent at 90 degrees.
Cambridge: 1997.NPR, Seeing Things Through The Viewfinder (accessed July 29, 2010) The most popular method involves using a digital camera as the image taking camera and an intact twin-lens reflex camera (TLR) or pseudo-TLR as the "viewfinder" camera.Shutterbug, TtV Photography (accessed July 29, 2010) TLRs typically have square waist-level viewfinders, with the viewfinder plane at 90 degrees to the image plane. The image in a TLR viewfinder is laterally reversed, i.e.
In Apley compression test, the person lie down in prone position with the knee flexed at 90 degrees. One hand is used to stabilise the hip and another hand grasp the foot and apply a downward compression force while external and internal rotates the leg. Pain during compression indicates meniscal tear. Examination for anterior cruciate ligament tear should be done for those with meniscal tear because these two conditions often occurs together.
When all those folk had died, Lady Jean (Lady Perth) converted the small valley into a loch, sometime between 1785 and 1800. The plan of the loch shows a street on an east to west alignment, with houses on either side of the street. Each house has a 1-acre plot, laid out at 90° degrees to the right, behind it. The village was known to extend east to a military road.
Under the eastern gable were the wide entry stairs with emphatic, large balustrade. The western gable was enclosed and a hexagonal bay window projected from the centre. The entry stairs led to a wide piazza that took advantage of the north-eastern corner with views to the distant horizon. Entry into the house was at 90 degrees via a small, square entry hall that had a projecting bay window with built-in timber seat.
Laplandite has a general formula of Na4CeTiPO4Si7O18•5H2O, and is found primarily in igneous rocks. This silicate mineral has been found as inclusions in pegmatites, primarily in the Kola Peninsula in Lappland, where the mineral's name gets its origin. Laplandite is orthorhombic, which states that crystallographically, it contains three axes of unequal lengths that all intersect at 90 degrees, perpendicular to one another. The shape of the crystal is bipyramidal, and is similar in structure to olivine or aragonite.
When under effective fire, riflemen went to fully fledged "fire and movement". The riflemen were ordered to fall to the ground as if they had been shot, and then crawl to a good firing position. They took rapid aim and fired independently until the squad commander called for cease fire. On some occasions the Bren group advanced by bounds, to a position where it could effectively commence fire, preferably at 90 degrees to the main assault.
Feathers were metal prongs with a curved upper end. Two of these were inserted into the holes, the curves in opposite directions at 90 degrees to the line of potential fracture. A wedge- shaped metal tare was hammered between the two until the granite fractured. The granite trade was always somewhat sporadic with fluctuating production and indeed no granite was produced or transported between 1841 and 1851 and the quarries and tramway had closed by 1858.
The image is projected through a fisheye lens onto the dome of the planetarium. This planetarium is housed inside a 45-ton bronze-clad truncated cone, with the north side tilted at 51.5o to the horizontal (the latitude of Greenwich), the south side pointing at the local Zenith (i.e. at 90 degrees to the local horizon) and the top being slanted to be parallel to the celestial equator. The construction stands parallel to (but 50 metres east of) the prime meridian.
Enstatite and the other orthorhombic pyroxenes are distinguished from those of the monoclinic series by their optical characteristics, such as straight extinction, much weaker double refraction and stronger pleochroism. They also have a prismatic cleavage that is perfect in two directions at 90 degrees. Enstatite is white, gray, greenish, or brown in color; its hardness is 5–6 on the Mohs scale, and its specific gravity is 3.2–3.3. This prismatic form is used in gemstones, and for academic purposes.
The faster the galvanometers, the smoother and more flicker-free the projected image. Each galvanometer moves the beam in one plane, either X axis or Y axis. Placing the galvanometers close together at 90 degrees to each other allows full movement of the laser beam within a defined square area. The most useful specifications of a galvanometer pair for laser show use are the speed at which they can draw points, and the angle at which they achieve this speed.
Manson-Bahr is credited with unravelling the mystery of how the Common snipe creates its drumming sound which is unlike other birdsong. He worked out that the sound was created by placing out two tail feathers at 90 degrees to the direction of flight. When diving these feathers create this unusual sound. He demonstrated this in front of the British Ornithologists Union by inserting two snipe feathers into a cork which he then whirled around his head on a string.
The centres' main role is to provide space for the players outside them. They need to run good lines (run into spaces or at 90 degrees to their opposition), be able to side step and swerve, and have good passing skills. When the ball is moved along the opposition backline, the centres are the first players to make the tackle. They need to be aggressive tacklers to knock their opponent down and seize the ball and be good at organising the defensive lines.
French doors open from the vestibule onto the narrow verandahs overlooking the street. The main stair, opposite the entrance door, consists of a single flight splitting midway up into two curved flights, positioned at 90 degrees to the lower flight. The stair, which is framed by an ornamental arch, has a decorative wrought iron balustrade and timber handrail. The flat-sheeted ceiling of the vestibule has timber cover battens laid out in a pattern reflecting the geometry of the room.
The front array is designed for minimum crosstalk, with the front left and right microphones having supercardioid polar patterns and angled at 90 degrees relative to the center microphone. It is important that high quality small diaphragm microphones are used for the L and R channels to reduce off-axis coloration. Equalization can also be used to flatten the response of the supercardioid microphones to signals coming in at up to about 30 degrees from the front of the array. The center channel is placed slightly forward.
The earliest sections of the RNA Workshop may date back to 1925. This building operates as a workshop and is used to store supplies and machinery. It is a combination of three buildings, with the largest single-storey building at the rear of the complex with two smaller single-storey, gable roof buildings set at 90 degrees to it at the front. The front facades of the two smaller buildings are clad in weatherboards, with the side and rear walls of all buildings clad in corrugated iron.
Next, it was tried on GNR Class C2 No. 1520 in March 1903. There was no external change visible on the locomotive as a result of this modification. When the valve gear was in use, the motion was derived from two eccentrics, one of which gave lap and lead movement by swinging the link backwards and forwards on its suspension bracket. The other eccentric was set at 90 degrees to the crank and rocked the link by means of a bell crank on the hanging link pin.
The stair, which extends to the third level, has terrazzo treads and risers, a timber handrail and a decorative iron balustrade. The Stokes Street entrance to the second level is less prominent, being positioned in a gap between the rendered and the brick sections of the building. The stair at this entrance is a single straight flight terminating in a landing located closer to the upper level. At the landing, the stair splits into two flights, which run at 90 degrees to the main flight of stairs.
These are noticeable for their sloping top like a reading desk or lectern, in the equatorial plane, usually with a star on top having dials in all its angles, and at 90 degrees to this a hemi-cylinder with a polar dial inscribed in it. The lectern usually has hollow dials on the south, east and west faces, and hour lines are inscribed in every available angle. One of the more complicated was formerly at Mid Calder House and is now at Culzean Castle. Lectern dials have some counterparts in continental Europe.
The actor (or subject) performs in front of the reflective screen with a movie camera pointing straight at them. Just in front of the camera is a one-way mirror angled at 45 degrees. At 90 degrees to the camera is a projector which projects an image of the background onto the mirror which reflects the image onto the performer and the highly reflective screen; the image is too faint to appear on the actor but shows up clearly on the screen. In this way, the actor becomes their own matte.
Cursive handwriting from the 19th-century USA. In both the British Empire and the United States in the 18th and 19th centuries, before the typewriter, professionals used cursive for their correspondence. This was called a "fair hand", meaning it looked good, and firms trained their clerks to write in exactly the same script. In the early days of the post office, letters were written in cursive – and to fit more text on a single sheet, the text was continued in lines crossing at 90 degrees from the original text.
Daspit's cruise raised enough of an issue that tests were carried out by COMSUBPAC's gunnery and torpedo officer, Art Taylor. Taylor, "Swede" Momsen, and others fired warshots into the cliffs of Kahoolawe, beginning 31 August. Additional trials, supervised by Taylor, used a crane to drop warheads filled with sand instead of high explosive from a height of (the height was chosen so the velocity at impact would match the torpedo's running speed of 46 knots). In these drop tests, 70% of the exploders failed to detonate when they hit the target at 90 degrees.
Each pair of valves was parallel, at 90 degrees to each other, with the valve stems and springs exposed, as were the long pushrods which ran on the outside of the engine. A light alloy piston ran in a steel cylinder barrel and the cylinder head was made of cast iron. The rest of the cycle parts were based on Triumph's well proven Triumph Model H side-valve. This had a poor reputation for handling, however, and was not really built for the more powerful four valve engine.
The weapon itself has three firing modes: semi-auto, full-auto at 460 rounds per minute, and three-round burst at over 2100 cyclic rounds per minute, or approximately 36 rounds per second. The loading and feed mechanism is physically very complicated but exceptionally fast and reliable. Rounds are fed into the weapon from a magazine that lies above and parallel with the barrel. The rounds are oriented vertically (at 90 degrees to the bore) and are fed downwards into the rotary chamber so that they can be rotated 90 degrees for firing.
Flowering and seed production begins at ten years of age, however large quantities of seeds are not produced until the tree is 20. As with most maples, Norway maple is normally dioecious (separate male and female trees), occasionally monoecious, and trees may change gender from year to year. The fruits of Norway maple are paired samaras with widely diverging wings, distinguishing them from those of sycamore, Acer pseudoplatanus which are at 90 degrees to each other. Norway maple seeds are flattened, while those of sugar maple are globose.
Rear overhang may present a problem in large vehicles such as buses. Long rear overhang would require the driver to pay attention to nearby vehicles when turning at 90 degrees. Since the rear overhang is outside the wheelbase, it may hit a vehicle in the adjacent lane, especially when turning 90 degrees right (in a right-hand drive country). Also, some specialized vehicles (such as the AM General HMMWV and the related Hummer H1) are designed with no frontal overhang, allowing it to possess incredible abilities such as climbing vertical walls.
Determining the location in space of a given blip was a complex multi-step process. First the operator would select a set of receiver antennas using the motorized switch, feeding signals to the receiver system. The antennas were connected together in pairs, forming two directional antennas, sensitive primarily along the X or Y axis, Y being the line of shoot. The operator would then "swing the gonio", or "hunt", back and forth until the selected blip reached its minimum deflection on this display (or maximum, at 90 degrees off).
Adoxa moschatellina is a plant which forms carpets with a delicate appearance and it has rhizomes. It has thin, erect unbranched stems which end in clusters of five green flowers which are across. These flowers give the species one of its common names, "Town Hall Clock" as they face out in four directions at 90 degrees to each other, resembling the four faces of a town clock. The flowers have five petals and five stamens, but the stamens are divided into two parts creating the impression that there are ten stamens.
The John Reid Annexe is situated directly behind the John Reid Pavilion with the ridge of the Annexe roof at 90 degrees to the main ridge of the John Reid Pavilion. The Annexe is of single-skin timber construction, clad externally with chamferboards, with horizontal boarding on some interior walls. It has a corrugated iron gable roof supported by hardwood timber trusses. The Annexe can be accessed at both ends via steel roller doors and the doors lead through to the John Reid Pavilion to the northwest and Building No.7 to the southeast.
To fire the rocket, the firer moves a charge lever forward with his firing hand thumb. The rocket motor burns out before it leaves the launch tube, the resulting blast being directed rearwards from the launch tube. The rocket then coasts to the target, arming itself after it has passed a certain arming distance. The warhead is a HEAT shaped charge and could penetrate of rolled homogeneous armour at 90 degrees, as was taught to soldiers trained on the weapon system in the British Army, Royal Navy (Royal Marines) and RAF Regiment.
2-D electrophoresis begins with electrophoresis in the first dimension and then separates the molecules perpendicularly from the first to create an electropherogram in the second dimension. In electrophoresis in the first dimension, molecules are separated linearly according to their isoelectric point. In the second dimension, the molecules are then separated at 90 degrees from the first electropherogram according to molecular mass. Since it is unlikely that two molecules will be similar in two distinct properties, molecules are more effectively separated in 2-D electrophoresis than in 1-D electrophoresis.
Two days later he was promoted to colonel and temporary brigadier general. He commanded the 5th Division Artillery at Bullecourt and Third Ypres, where he employed artillery to cover the flank. In the mobile warfare that followed the German offensive of 1918, Bessell-Browne showed himself flexible and adaptable and pioneered new tactics to provide close support for infantry. In the attack on Bellecourt, he was able to put down an accurate barrage at 90 degrees from the line of sight to cover the attack at Le Catelet.
An illustration that shows the four stages (motion stop at 90 degrees angle) of one full cycle of Maltese cross. The name, Geneva drive, is derived from the device's earliest application in mechanical watches, which were popularized in Geneva, being the classical origin of watchmaking industry. The Geneva drive is also called a "Maltese cross mechanism" due to the visual resemblance when the rotating wheel has four spokes, since they can be made small, and are able to withstand substantial mechanical stress. These mechanisms are frequently used in mechanical watches.
When an on-screen enemy makes an attack on the player, a punch pad will swing out on its hinge at a smooth pace, and upon reaching full extension at 90 degrees, the LEDs light up red. The pad stays lit for a short time, and then the pad returns inside the cabinet to rest. The player must punch this pad while the LEDs are lit. The strength of the player's punch is irrelevant to the game, and the game warns the player not to punch hard, to prevent the risk of breaking the machine.
The buildings are set in a U-shape configuration, and are of face brick construction with steeply pitched gable roofs. Decorative timber fretwork is a feature of each gable end, and the south and west wings have louvred vents behind the fretwork. The 1907 wing is separated from the adjoining western wing, the western wing abuts the south wing at one corner and all buildings are connected by a timber verandah. A separate room was constructed for the principal's office at 90 degrees to the west wing, accessed from the verandah.
A very rare if not unique layout links the two turrets with a concrete tunnel about 15 feet long incorporating a spur tunnel that exits the main tunnel at 90 degrees about halfway along its length. Both turrets sit on concrete slabs placed on top of brick walls dug into the ground. The steel seat hangers and wooden seats have also survived. The turrets differ from the Hornchurch examples in that the gun port is not U shaped but, rather, the top of the turret is a complete ring of concrete.
In the irrigation industry, matched precipitation rate (MPR) is a term that is used to calculate the amount of precipitation in a given area is uniform. In order to be "matched" all sprinkler heads in a given zone must have the same rate of precipitation. This can be achieved by matching the gallonage of a standard rotor to its arc and reducing range accordingly(ie. 2 gallons at 90 degrees, 4 gallons at 180 degrees, or 8 gallons if the head does a full circle) or by using MPR nozzles or sprinklers.
In trials, it was discovered that the maximum dive angle was only 50°. In June 1936, Ernst Udet took the He 118 on a test flight but after commencing his first dive from about 13,000 feet the propeller suddenly feathered, shearing the reduction gears, and the He 118 disintegrated, leaving Udet to parachute to safety. The Ju 87 repeatedly demonstrated dives at 90 degrees with no trouble, and so won the contract. Heinkel complained in his biography that Udet ignored instructions and flew the aircraft outside of its limits.
An archway featuring multiple archivolts resting on a boss that is a stylized (see Torah) figure in turn resting on lions (see Lion of Judah). The entire arch is supported by multiple engaged columns in groups set at 90 degrees from each other. Four multiple light doors with the center two paired are topped by wide cross beam bearing the words, "Akron Jewish Center" supporting a fully glazed tympanum. A smaller doorway on the left leading directly to the athletic facilities has a deep transom and ornamented lintel.
Made up of four bullseye panels, the "revolving lens unit weighed 6 tons but floated on mercury such that it could be turned with one finger." The optic produced a "one and a half million candlepower flash every seven and a half seconds". Each flash was created by one of the four bullseye panels set at 90 degrees, as the unit made a complete rotation every 30 seconds. The light has retained this characteristic to the present day, and has a nominal range of , at a height above sea level or focal plane of .
Snaking puzzle Some word search puzzles are snaking puzzles, in which the word is not a straight vertical, horizontal, or diagonal line, but "bends" at 90 degrees at any given letter. These are much more difficult than conventional puzzles. The difficulty level is further heightened when the next letter can be at 45 degrees, and using the same letter more than once is permitted, too. Snaking puzzles either hide words in a random fashion, or are designed to trace out a path in a definite shape, like a square, rectangle, horseshoe, or donut.
Essentially, increasing the current flow into the damper magnetic circuit increases the circuit magnetic flux. This in turn causes the metal particles to change their alignment, which increases fluid viscosity thereby raising the compression/rebound rates, while a decrease softens the effect of the dampers by aligning the particles in the opposite direction. If we imagine the metal particles as dinner plates then whilst aligned so they are on edge - viscosity is minimised. At the other end of the spectrum they will be aligned at 90 degrees so flat.
This injury should be differentiated from the developmental "apophysis" which is the secondary ossification center of the metatarsal bone. It is normally occurring at this site in adolescents. Differentiation is possible by characteristics such as absence of sclerosis of the fractured edges (in acute cases) and orientation of the lucent line: transverse (at 90 degrees) to the metatarsal axis for the fracture (due to avulsion pull by the peroneus brevis muscle inserting at the proximal tip) – and parallel to the metatarsal axis in the case of the apophysis.
Individual cilia, when part of a metachronal wave being used for protist locomotion, individually beat in a pattern similar to the planar stroke of a flagellum. The difference is that the recovery stroke is at 90 degrees to the power stroke, so that the cilia avoid hitting each other. Metachronal rhythms may be seen in the coordinated movements of the legs of millipedes and other multi-legged land invertebrates,Edward Aiello and Michael A Sleigh (1972) The metachronal wave of lateral cilia of Mytilus edulis. J. Cell Biol. 54:493-506.
Some toilets allow the user to defecate in either the squatting or the sitting position Humans use one of two types of defecation postures to defecate: squatting and sitting. People use the squatting postures when using squat toilets or when defecating in the open in the absence of toilets. The sitting posture on the other hand is used in toilets that have a pedestal or "throne", where users generally lean forward or sit at 90-degrees to a toilet seat. In general, the preferred posture is largely a cultural decision.
Bliss' original design consisted of two armatures spinning on a single vertical axle. One armature was connected to commutators that were 90 degrees offset from the commutators connected to the other armature. When one set of commutators is aligned with the earth's magnetic field no current is produced, but an offset angle creates a positive or negative current in proportion to the sine of the offset angle. Since the sine of the angle peaks at 90 degrees, a reading could indicate either a certain direction or the exact opposite direction.
One of the proposals in the building of the Pilmoor, Boroughbridge and Knaresborough Railway was a connection from that line directly onto the T & M Line east of Sunbeck Junction. Whilst the earthworks were built including a bridge over the ECML, the line was never installed. This was to have been a through route between Leeds and Scarborough. The embankment of the unused railway on the western side of the ECML was the location of four signals that faced at 90 degrees to the running lines on the ECML.
At the Ford Assembly Plant near the Halton–Peel regional boundary, Highway 403 branches off from the QEW and heads north for along the western edge of Mississauga. Here it interchanges with Highway 407 again, but the two freeways curve at 90 degrees to avoid each other. Highway 407 continues to the north and west, while Highway 403 turns east to follow alongside a hydro corridor through the centre of Mississauga. From this interchange to Highway 401, high-occupancy vehicle (HOV) lanes are present in the shoulder lanes for vehicles with at least one passenger.
An agreement in principle was reached in December 2015 between the landlord of the stadium site (Cardiff Athletic Club) and its tenant (Cardiff Blues) to give the club a 150-year lease on the stadium site. This could see the redevelopment of the Arms Park, including a new 15,000 seater stadium at 90 degrees to the existing stadium costing between £20 million and £30 million and surrounded by new offices and apartments. More detailed negotiations will begin with a final approval expected early in 2016. If the final agreement goes ahead, Cardiff Athletic Club would receive an upfront payment of approximately £8 million.
Controlled by weight-shifting, similar manner as that of the Segway PT, the unit is fully self-balancing and can move in any direction, including sideways. There are two wheels, the larger driving wheel for travelling in a forward direction, and a trailing steering wheel at 90 degrees to this one. Both the drive wheel and the steering wheel however are constructed of multiple smaller 'planet' wheels that allow the wheel to be moved laterally. When moving forward the main wheel will be powered and the smaller planet wheels on the steering wheel will rotate to avoid the steering wheel dragging.
The suspension setup at the front and the rear of the vehicle consisted of a double wishbone pushrod actuated torsion bar with the dampers housed inside the monocoque of the car. It had bodywork elements designed to direct airflow into the chassis. Its engine, a naturally aspirated V8 variant of the BMW S65 used in the company's M3 model, was angled at 90 degrees, and underwent a re-badging by Praga. Engineers used the production block of the S65, reducing its capacity to for the best possible efficiency rate, The engine produces approximately for a maximum speed of 9,500 revolutions per minute (rpm).
Superexchange, or Kramers–Anderson superexchange, is the strong (usually) antiferromagnetic coupling between two next-to-nearest neighbour cations through a non-magnetic anion. In this way, it differs from direct exchange in which there is coupling between nearest neighbor cations not involving an intermediary anion. Superexchange is a result of the electrons having come from the same donor atom and being coupled with the receiving ions' spins. If the two next-to-nearest neighbor positive ions are connected at 90 degrees to the bridging non-magnetic anion, then the interaction can be a ferromagnetic interaction. Fig.
The hydraulic press depends on Pascal's principle-the pressure throughout a closed system is constant. One part of the system is a piston acting as a pump, with a modest mechanical force acting on a small cross-sectional area; the other part is a piston with a larger area which generates a correspondingly large mechanical force. Only small-diameter tubing (which more easily resists pressure) is needed if the pump is separated from the press cylinder. Pascal's law: Pressure on a confined fluid is transmitted undiminished and acts with equal force on equal areas and at 90 degrees to the container wall.
The car was fitted with a purpose built 18.3-litre V12 engine based on a hybrid of the Sunbeam Manitou and Sunbeam Arab aero engines. This engine had four blocks of three cylinders arranged in two banks set at 60 degrees (unlike the Arab which were set at 90 degrees). Each cylinder had one inlet and two exhaust valves actuated by a single overhead camshaft. The two camshafts were driven by a complex set of 16 gears from the front of the crankshaft - a very similar arrangement to that used on the Maori engine which had two OHC per bank of cylinders.
The old Kusumba village was located on the river bank of river Panzra which was lost due to the flood that occurred to Panzra river during the years 1864–65. After that the village was relocated to some distance from the river bank and the newly situated village is the current Kusumba Village. The architectural structure of Kusumba village has a cross line road (rach road meets every another road at 90 degrees) like Haddppa Sanskruti designed by Sir Mokshagundam Visvesvaraya. There is a very beautiful hemadpanthi temple of Kalambeshwar (God Shiva) Near by Panzra river which is very old.
The station consisted of four large C Type hangars with permanent brick-built technical and domestic buildings. The remaining aerodrome buildings (for technical activities and accommodation) were built in a compact layout behind the hangars, in an arrangement replicated across all of the Expansion Period airfields: Technical Area, Station Offices, Officers' Mess, Sergeants' Mess, Airmen's' Quarters, Married Quarters, and Officers' Married Quarters. Roads were arranged either parallel or perpendicular to Ermine Street (A15) with the Guardroom at 90-degrees to the main entrance and the Station Headquarters facing Ermine Street. This resulted in the base occupying an area of 360 acres.
The Circular Quay ferry wharf complex consists of five double-sided wharves at 90 degrees to the shoreline, numbered 2 to 6. Wharves 3 to 5 are used exclusively by Sydney Ferries, wharf 2 west is used by Sydney Ferries, wharf 2 east is used by Manly Fast Ferries by while wharf 6 is used by other operators including Captain Cook Cruises. Each wharf has ticket selling facilities on both sides of the barriers as most other wharves do not have such facilities. On the eastern side alongside Bennelong Apartments, is the Eastern Pontoon used by charter operators.
A thermoregulatory role seems unlikely, although the taller crest in Sphenacodon ferocior is allometrically larger than in S. ferox. Recent research has favored a display role for the tall sails in Dimetrodon and Edaphosaurus. S. ferox and the larger S. ferocior Both Sphenacodon and Dimetrodon have been depicted with their short limbs splayed outward at 90 degrees from the body in a wide pushup position and with the tail (and even belly) dragging on the ground, similar to modern lizards and crocodiles. A sprawling stance is also typical for Sphenacodon and Dimetrodon skeletons as currently mounted in museums.
In 1998, £12m funding was provided by the government-sponsored Redevelopment Agency English Partnerships, private companies, the European Community and Manchester City Council to redevelop Shambles Square.Eyewitness Manchester: 20 April 1998. Retrieved 10 March 2008 The buildings were subsequently dismantled and moved 300 metres northwards to their present location, close to Manchester Cathedral in 1999.Manchester Online: The Great Survivors (13 April 2004).. Retrieved 12 March 2008 The Old Wellington Inn and Sinclair's were rebuilt at 90 degrees to each other and joined together by a stone extension to form two sides of the new Shambles Square.
Structural domes can be formed by horizontal stresses in a process known as refolding, which involves the superposition, or overprinting, of two- or more fold fabrics. Upright folds formed by a horizontal primary stress in one direction can be altered by another horizontal stress oriented at 90 degrees to the original stress. This results in overprinting of the twofold fabrics, similar to wave interference patterns, that results in a system of basins and domes. Where the synclines of both fabrics are superimposed, a basin is formed; however, where the anticlines of both fabrics are superimposed, a dome is formed.
They may make additional passes with different wheels and in different directions (at 90 degrees for a simple double curvature shape, for example) to achieve the desired shape. Using the correct pressure and appropriate anvil wheel shape, and accurate close patterns of overlapping wheeling passes (or actually overlapping with low crown anvils) makes using the machine something of an art. Too much pressure produces a part that is undulating, marred, and stressed—while too little pressure makes the job take a long time. Localised wheeling on one part of the panel is likely to cause mis-shaping in adjacent areas.
This causes circular birefringence, and is engineered so that there is a 90 degree rotation of the linear polarization state. However, when a voltage is applied across a cell, the molecules straighten out, lessening or totally losing the circular birefringence. On the viewing side of the display is another linear polarizing sheet, usually oriented at 90 degrees from the one behind the active layer. Therefore, when the circular birefringence is removed by the application of a sufficient voltage, the polarization of the transmitted light remains at right angles to the front polarizer, and the pixel appears dark.
In A Method for Lighting the Stage, McCandless discusses color, distribution, intensity and movement as the qualities that can be manipulated by a lighting designer to achieve the desired visual, emotional and thematic look on stage. The McCandless method, outlined in that book, is widely embraced today. The method involves lighting an object on the stage from three angles—2 lights at 45 degrees to the left and right, and one at 90 degrees (perpendicular to the front of the object). An alternative formulation is by Jody Briggs, who calls them Variable of Light: Angle, Color, Intensity, Distance, Texture, Edge- quality, Size, and Shape.
An initial calibration is made to determine the lens parameters and location of the camera relative to the background boards, which are two vertical planes positioned at 90 degrees to one another behind the object to be scanned. When scanning, the camera must be able to see part of the laser line on each board. This enables the software to reconstruct the plane of the projected laser light. Once it has determined the two- dimensional plane that the line laser is projecting, it is able to analyse the image of the laser line falling on the scanned object and resolve it into points in space.
Staten Island departed Seattle 31 October 1973 for San Diego where her crew received refresher training between 5 and 16 November 1973, at which time she departed to escort ships in "Operation Deep Freeze 1974". Staten Island helped rescue the USNS Maumee when her rudder became damaged in the heavy ice at McMurdo. The Staten Island crew freed the rudder from its jammed position at 90 degrees and fixed the rudder with a rudimentary manual steering gear allowing USNS Maumee to make her way to New Zealand for repairs. Staten Island returned from Antarctica to Seattle via stops in Chile, Peru, and Mexico during April 1974.
A pen-light can aid in discerning the jugular filling level by providing tangential light. The JVP is easiest to observe if one looks along the surface of the sternocleidomastoid muscle, as it is easier to appreciate the movement relative to the neck when looking from the side (as opposed to looking at the surface at a 90 degree angle). Like judging the movement of an automobile from a distance, it is easier for an observer to see the movement of an automobile when it is crossing the observer's path at 90 degrees (i.e., moving left to right or right to left), as opposed to coming towards the observer.
De Dion-Bouton 130 hp aircraft engine (propeller end) De Dion-Bouton 130 hp aircraft engine (fan end) The De Dion-Bouton 12B 130 hp aircraft engine was an air-cooled twelve cylinder Vee engine with two rows of six cylinders, having a bore of 106 mm and a stroke of 126 mm. The two cylinder rows were inclined at 90 degrees to each other and consisted of separately cast cylinders. The propeller shaft was geared down from the crankshaft by spur gears and rotated at half the engine speed. The intake and exhaust valves were controlled by a single camshaft, which was placed between the two rows of cylinders.
A Flit gun consists of a pneumatic pump cylinder with a hand-operated piston to force air through an air nozzle in the front. Below the front of the pneumatic tube hangs a cylindrical container which acts as a reservoir for liquid insecticide, this reservoir being set at 90 degrees to the pneumatic tube. In early versions, the reservoir is permanently secured to the pump and equipped with a removable, gasketed screw cap for filling. In later, improved versions, the insecticide reservoir is secured to the pump with a coarse screw fitting and a seal of cork composite or gasket paper, so that it can readily be unscrewed for filling.
Although the alveolar process is composed of compact bone, it may be called the cribriform plate because it contains numerous holes where Volkmann canals pass from the alveolar bone into the PDL. The alveolar bone proper is also called bundle bone because Sharpey fibers, a part of the fibers of the PDL, are inserted here. Similar to those of the cemental surface, Sharpey fibers in alveolar bone proper are each inserted at 90 degrees, or at a right angle, but are fewer in number, although thicker in diameter than those present in cementum. As in cellular cementum, Sharpey fibers in bone are generally mineralized only partially at their periphery.
The car's mid-mounted, naturally-aspirated petrol V8 engine, angled at 90 degrees, was carried over from the TS030 Hybrid. Its displacement, increased from to for better efficiency, supplied to the rear wheels. Like its predecessor, the TS040 had two kinetic energy recovery system (KERS) regenerative braking devices (the ACO used the alternate acronym, ERS) produced by Toyota Racing Development at the company's road research and development Higashi-Fuji Technical Center to charge a Nisshinbo supercapacitor. Additional power was directed to the axles (the rear by Denso and the front by Aisin AW), giving it an automatic horsepower increase of for a total of .
A few of the larger blockhouses, or artillery forts, had indirect fire mortars and heavy cannon mounts. Behind the major structures were two rows of smaller four-to-seven-man pillboxes that mirrored their larger relatives, with a well protected front and lateral cross fire to stop any enemy that managed to get on top of the fort, or come up from behind. Most of the lines consisted of just the smaller pillboxes. The "light objects" were simple hollow boxes with one or two machine gun positions, a retractable observation periscope, grenade tubes, hand-operated air blower, and a solid inner door at 90 degrees to a steel bar outer door.
It consists of a quarter-torus duct bent at 90 degrees from the arc source and the plasma is guided out of the duct by principle of plasma optics. There are also other interesting designs such as a design which incorporates a straight duct filter built-in with truncated cone shape cathode as reported by D. A. Karpov in the 90's. This design became quite popular among both the thin hard-film coaters and researchers in Russia and former USSR countries until now. Cathodic arc source can be made into the long tubular shape (extended-arc) or long rectangular shape but both designs are less popular.
The original Siple I station had a four-person winter over crew and the later Siple II station had an eight- person winter over crew. The Siple II station used a 300 kW Kato square wound generator powered by a Caterpillar D353 engine to power the VLF (Jupiter) transmitter which transmitted to a receiver in Roberval, Canada. At the time, the Siple II station had the world's longest dipole antenna. Originally long, it was subsequently increased to and then a second antenna running at 90 degrees was added, resulting in a total antenna length of approximately 50 miles and allowing for phased VLF transmissions.
If a body in circular orbit (or at the periapsis of an elliptical orbit) accelerates along its direction of travel to escape velocity, the point of acceleration will form the periapsis of the escape trajectory. The eventual direction of travel will be at 90 degrees to the direction at the point of acceleration. If the body accelerates to beyond escape velocity the eventual direction of travel will be at a smaller angle, and indicated by one of the asymptotes of the hyperbolic trajectory it is now taking. This means the timing of the acceleration is critical if the intention is to escape in a particular direction.
Test flying the WT-11 was carried out following the first flight on 12 December 1982 at Wizard Lake, Alberta, by company chief test pilot Dennis Maland. Initial results showed that with the Rotax 277 engine the aircraft would sustain level flight at low throttle settings and would cruise comfortably at . The stall speed was noted as 23-25 mph (37–41 km/h). Maland rated the rudder and elevators as "very responsive" and the ailerons as "less sensitive but good", with roll rates from 45-45 degrees of 3.5 seconds at cruise speed. Cross wind testing showed the aircraft was controllable in winds of at 45 degrees and at 90 degrees.
The newly discovered planet 'Hestia' (which orbits the Sun at 90 degrees to Earth's orbit) has a colony; there are some references to colonies on Mars; Saturn's moon Titan has a judicial penal colony;2000 AD #30 and Mega-City One is known to have deep space missile silos on Pluto.2000 AD #771 The paranormal is both common and often openly visible and so is accepted by both civilians and Judges. Ghosts, demons, ancient gods and two different creatures both claiming to be Satan have appeared in Mega- City One, with the Grand Hall itself known to be haunted by a disgraced former Chief Judge. Magic is real and has been practiced by some criminals.
The first hot-cathode CRT, the Western Electric 224-B, had a standard four-pin bayonet base, and the bayonet pin was a live connection. (Five effective pins: It was an electrostatic-deflection gas-focused type, with a diode gun and single-ended deflection. The anode and the other two plates were common.) An early exception to these types of bases is the Peanut 215, which instead of using prongs had a tiny bayonet base with four drop-like contacts. Another exception is the European Side Contact series commonly known as P, which instead of using a prong, relied on side contacts at 90 degrees from the tube axis with four to twelve contacts.
When the aircraft landing gear is firmly on the runway surface, the BTV combines audio and visual prompts to the flight crew in order to achieve the calculated required deceleration to achieve the designated turnoff point. If BTV senses that the aircraft will overrun the runway end, it automatically applies maximum wheel braking, and it sends an aural message (to the flight crew) to apply maximum reverse thrust, along with a red message in the primary flight display. It continues to call out keep max reverse until the computer figures the desired turnoff point can be achieved at a safe turnoff speed. If the taxiway departs the runway at 90 degrees, the BTV automatically disconnects when the aircraft groundspeed reduces to 10 knots.
With the experience gained from the Rhön gliding competitions, the students at Akaflieg Stuttgart (Akademische Fliegergruppe – academic flying group) designed the fs18, which was able to turn tightly in thermals and had a relatively low sink rate, over the six months preceding the next Rhön competition at Wasserkuppe. The result was the fs18 which was a high-wing cantilever monoplane with gulled centre section, to ensure that the wings joined the fuselage at 90 degrees, rectangular midsection and tapered outer section. Flaps were fitted to the trailing edge of the midsection to 30% chord, and ailerons were mounted on the trailing edges of the outer wing sections. The fuselage consisted of the cockpit pod smoothly narrowing to a boom-like rear fuselage supporting the tail unit.
Jay Cridlin from the Tampa Bay Times wrote that guests should expect long waiting times to ride, although the length of the ride is "probably a fair tradeoff." Cridlin called SheiKra, "a majestic, one-of-a-kind roller coaster experience", and mentions that the attraction, "may be the world's finest dive coaster". In a 2005 article, Cridlin mostly praised the 90-degree drop and wrote that, "Despite its sheer size and dominance of the Busch Gardens landscape ... the coaster likely will still inspire debate among park visitors." Eric Michael from Orlando Sentinel wrote, "The 200-foot monster, Florida's tallest, wins my vote for best drop, straight down at 90-degrees, and most shameless tease (riders hang at the top for a few seconds)".
The original concept involved the polar trips starting from accepted coastal points, involving long sledging journeys. Over time the significantly shorter, easier, and less serious "Last Degree" polar trips – from 89 degrees to the pole (at 90 degrees) – have been claimed as the Explorers Grand Slam (Last Degree). Currently, the climbing community and other leading organizations including the American Alpine Club, The Explorers Club, climbing companies such as International Mountain Guides, and the popular press all define the Explorers Grand Slam as having accomplished the Seven Summits plus (at a minimum - the last degree of) the North and South Poles. There is some consensus that a True Explorers Grand Slam means one will also have summitted all 14 peaks above 8,000 metres (26,247 ft) (14 + 7 + 2).
One source provides this description of the original buildings:Architectural Ambler: Wesleyan Grove Historic District > [They were] between 11 and 16 feet in width, with wide, double-door > entrances and tall roofs with steep gables pitched at 90 degrees. They were > one and a half stories in height, and generally twice as tall as they were > wide. The wooden platforms over which the tents had been erected morphed > into the wide front porches of the cottages. One of the cottages prepared for the Grand Illumination, a Wednesday evening tradition in summer Today the Campground is a community of summer residents and a smaller number of year-round residents who own the cottages (often fully modernized) or rent them from the owners.
The Mollweide is a pseudocylindrical projection in which the equator is represented as a straight horizontal line perpendicular to a central meridian one-half its length. The other parallels compress near the poles, while the other meridians are equally spaced at the equator. The meridians at 90 degrees east and west form a perfect circle, and the whole earth is depicted in a proportional 2:1 ellipse. The proportion of the area of the ellipse between any given parallel and the equator is the same as the proportion of the area on the globe between that parallel and the equator, but at the expense of shape distortion, which is significant at the perimeter of the ellipse, although not as severe as in the sinusoidal projection.
This can cause the case mouth to expand and jam in the chamber when fired from a handgun. AMT overcame this issue by drilling 18 holes at 90 degrees to the chamber. A sleeve was then welded over the chamber; providing a tiny amount of clearance for the excess gas to escape from the first set of holes on back to the second set, thereby relieving the pressure enough to prevent the case from sticking. The stainless steel slide has a large cutout over the barrel, similar to the Beretta M9, to facilitate better cooling and ejection of the spent brass casing (more likely it is simply to reduce the moving mass of the slide to allow for the blow-back operation).
Down, the water flows through several rapids and falls and sometimes fellow a circuitous route in townships of Galifet, The Pottery, Dupuis and Picard. At the level of the dam of "Lac Brûlé" (Burned lake) (formerly designated Vermilion-A), the Vermillon River turns north-east through the townships of Bisaillon, Olscamps and Payment, heading towards its mouth.Names and places of Quebec, the work of the Geographical Names Board published in 1994 and 1996 as an illustrated dictionary printed, and in that of a CD produced by Micro - Intel in 1997 from this dictionary. in its course the river flows prior to the southeast, then follows a segment 51.3 km to the northeast and finally bifurcates at 90 degrees for the last segment of 8.5 km flowing eastward to its mouth.
Hypoid gear Hypoid gears resemble spiral bevel gears except the shaft axes do not intersect. The pitch surfaces appear conical but, to compensate for the offset shaft, are in fact hyperboloids of revolution. Hypoid gears are almost always designed to operate with shafts at 90 degrees. Depending on which side the shaft is offset to, relative to the angling of the teeth, contact between hypoid gear teeth may be even smoother and more gradual than with spiral bevel gear teeth, but also have a sliding action along the meshing teeth as it rotates and therefore usually require some of the most viscous types of gear oil to avoid it being extruded from the mating tooth faces, the oil is normally designated HP (for hypoid) followed by a number denoting the viscosity.
This means that the modulation planes of the two radio signal waves are at 90 degrees angles to each other. The OMT device is used to separate two equal frequency signals, of high and low signal power. Protective separation is essential as the transmitter unit would seriously damage the very sensitive low micro-voltage (µV), front-end receiver amplifier unit at the antenna. The transmission signal of the up-link, of relatively high power (1, 2,or 5 watts for common VSAT equipment) originating from BUC (block up converter), and the very low power received signal power (µV) coming from the antenna (aerial) to the LNB receiver unit, in this case are at an angle of 90° relative to each other, are both coupled together at the feed-horn focal-point of the Parabolic antenna.
Unexposed silver-halide (AgX) photographic paper is temporarily fixed on a stationary internal drum, where three digitally controlled lasers simultaneously expose the photo-sensitive emulsion on the paper medium (or back-lit transparency medium) with red, green and blue laser light. The amount of light from each laser varies to provide specific color and density values for each pixel imaged to the print. The light-path includes a spinning surface coated mirror mounted on an air-bearing that travels along the axis of the internal drum, thus reflecting the laser light at 90 degrees allowing for a dimensionally consistent round imaging dot across the entire area of the photographic paper. The purpose of this round imaging dot is to maintain edge to edge sharpness on the final print. The print is then processed using traditional photochemical means (usually RA4).
Conventional V twin engines often had the fore and aft cylinders set at 90-degrees to reduce the primary engine vibration, which in turn created a bulky, long engine requiring a long-wheelbase frame. Honda briefed their engineers to produce a compact, inline V twin engine with any angle narrower than 90 degrees, but leaving enough space between the cylinders to locate conventional carburetors with the airbox located under the fuel tank, to maintain a slim-profile without side-facing carburetors associated with some marques. The optimal design was found to be with the cylinder angle set at 52 degrees, but additionally having offset crankpins to achieve acceptable levels of vibration reduction without the need for additional balancing shafts which would have added weight and reduced power. The narrow-V engine was compact and at the time was one of the lightest and narrowest, enabling a frame design offering good maneuverability.
Postcard sent in June 1910. This card was among those made by the Stanford Card Co. in Brooklyn, New York The swastika (from Sanskrit svástika; also known outside the Indian subcontinent as the Hakenkreuz, gammadion cross, cross cramponnée, croix gammée, fylfot, or tetraskelion) is an ancient Indo- European religious symbol with the earliest known example found in Mezine, modern Ukraine, that generally takes the form of an equilateral cross with four legs each bent at 90 degrees in either right-facing (卐) form or its mirrored left-facing (卍) form. It is considered to be a sacred and auspicious symbol in Hinduism, Buddhism, and Jainism and dates back at least 11,000 years. The swastika (gammadion, "fylfot") symbol became a popular symbol of luck in the Western world in the early 20th century, as it had long been in Asia, and was often used for ornamentation.
Impressed by the low bid for the construction contract submitted by the engineering firm Fox, Henderson and Co, the commission accepted the scheme and finally gave its public endorsement to Paxton's design in July 1850. He was exultant, but now had less than eight months to finalize his plans, manufacture the parts and erect the building in time for the Exhibition's opening, which was scheduled for 1 May 1851. Paxton was able to design and build the largest glass structure yet created, from scratch, in less than a year, and complete it on schedule and on budget. He was even able to alter the design shortly before building began, adding a high, barrel-vaulted transept across the centre of the building, at 90 degrees to the main gallery, under which he was able to safely enclose several large elm trees that would otherwise have had to be felled—thereby also resolving a controversial issue that had been a major sticking point for the vocal anti-Exhibition lobby.
Additionally, he described the texture-mapping precision as "awesome", the shading as "almost too well done" (the reviewer claimed it made the game more difficult by making the pits appear to be shadows and vice versa), the polygon movements as "very smooth and fluid", the "quirky mannerisms" of the title character as "always refreshing" and the backgrounds as "breathtakingly beautiful (especially the waterfall stages)". However, the reviewer said that the ability to adjust the camera angle even slightly "would have been a definite plus (at times the ground itself is at 75 degree angle while Crash constantly moves at 90 degrees, putting a slight strain on the eyes)." This echoed Tommy Glide of GamePro, who said "Trying to judge distances from the mostly static view behind Crash is the game's main flaw", while highly praising the scenery and effects. A reviewer for IGN noted that "gorgeous backgrounds and silky smooth animation make this one of the best-looking titles available for the PlayStation".
In cities which have a grid-based naming system, such as the borough of Manhattan in New York City, there may be a convention that the streets called avenues run parallel in one direction – roughly north–south in the case of Manhattan – while "streets" run at 90 degrees to them across the avenues; roughly east–west in Manhattan. In Washington, DC the avenues radiate from the centre running diagonally across the grid of streets, which follows typical French usage of the name (in France "boulevards" are often main roads running round the city centre). In Phoenix, Arizona, "the avenues" can colloquially mean "the west side of town", due to the numbered north–south-running roads being called "Avenues" in the western part of the city, separated from the eastern "Streets" by a "Central Avenue". Similarly, "the avenues" in San Francisco, California refers to the Richmond District and the Sunset District, the two neighborhoods on the Pacific coast, north and south of Golden Gate Park, respectively.
These were the 1983 Pirelli MP7 radials, introduced on the European version of the 1984 Honda VF1000R, a limited edition exotic motorcycle that showcased a number of new technologies including carbon fibre reinforced bodywork and air-adjustable anti-dive front forks. The new radial tyres had to provide race-replica handling for the very heavy dry weight chassis, up to a top speed of , making it the fastest production motorcycle of its day. The MP7 radials came to the US market in 1985. Radial construction uses textile or steel belts arranged at 90 degrees to the direction of travel, along with a layer of belts running around the tyre's circumference, with motorcycle radials deviating from the true radial design by adding belts running at angles to the radial belts, in the manner of bias-ply tyres, allowing the grip, durability, feel, and other characteristics to be adjusted to suit the tyre's design.
The 1973 images show the unusual passage under the new long tunnel, above which the pillars of the Loews hotel are being built. At the exit of the tunnel there was the traditional port chicane and, after the "Tabac" curve, the new path adjacent to the swimming pools (two "S" left-right and right-left connected by a short straight) and "La Rascasse" hairpin. It was the first year for the new garages in an independent lane, with an entrance just after "La Rascasse", where an asphalt slide was installed to overcome the difference in level from the roadway. In 1976 the "Sainte Dévote" and "Anthony Noghes" corners were modified: in order to slow down the transit of the cars, curbs and protections were repositioned. In 1986, thanks to the expansion of the roadway implemented in the chicane area of the port, the chicane itself was modified and made slower: instead of the previously existing fast change of direction, deemed too dangerous, new curbs were installed to design a double turn at 90 degrees.
The set—still in playable condition after almost 2,500 years—is able to produce both diatonic and pentatonic scales.Cultural China website -- "Bronze Chime Bells of Marquis Yi" Marquis Yi bianzhong on display in the Hubei Provincial Museum Bronze Zhong Bell from Spring and Autumn period; excavated in 1978 from the storage pit in Taigongmiao village, Baoji city, Shaanxi provinceThe bianzhong chimes of Marquis Yi are mounted on intersecting racks set at 90 degrees to each other, consisting of two pairs of massive wooden beams, with three smaller beams (carrying the highest bells) mounted on top of the upper beams. The beams are separated and supported at their ends and intersections by six bronze human figurines with upraised arms and wearing swords; the upper three figures are slightly smaller than the lower, which are cast on their own elaborately decorated bronze pedestals. The ends and intersection of each pair of beams are fitted with decorated bronze caps and front part of the brackets supporting the largest bells are cast in the shape of animals.
The experiment, known as R-103, had two large detectors at 90 degrees to the beam directions at opposite azimuth angles, to detect electrons, positrons and photons and to measure their energies and angles. It soon found an unexpected high rate of high-energy photons from the decay of neutral mesons () emitted at large angles to the beams. Because in the early 1970s there were no high-capacity hard disks, nor sophisticated data acquisition systems, data were written onto magnetic tapes at a rate that could not exceed 10 events per second (even so, a magnetic tape became full after 15 minutes of data taking). To keep the event rate below this limit, the electron detection threshold used in the event trigger was raised above 1,5 GeV, thus excluding from detection the yet undiscovered -particle with 3.1 GeV mass (this particle, a bound state of a charmed quark- antiquark pair, was discovered in 1974 at the Brookhaven AGS and at the electron-positron collider SPEAR at Stanford, and for this discovery the 1976 Nobel Prize in Physics was awarded to B. Richter and S.C.C. Ting).

No results under this filter, show 173 sentences.

Copyright © 2024 RandomSentenceGen.com All rights reserved.